stdin

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST2000DM001-9YN164
Serial Number:    S240K8R7
LU WWN Device Id: 5 000c50 051c9630e
Firmware Version: CC9F
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Aug 28 02:40:12 2018 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  584) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 238) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3081)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   092   085   006    -    230723283
  3 Spin_Up_Time            PO----   093   092   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    315
  5 Reallocated_Sector_Ct   PO--CK   070   051   036    -    40472
  7 Seek_Error_Rate         POSR--   081   060   030    -    129804110
  9 Power_On_Hours          -O--CK   084   084   000    -    14674
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    291
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    4548
188 Command_Timeout         -O--CK   100   098   000    -    8 13 14
189 High_Fly_Writes         -O-RCK   001   001   000    -    359
190 Airflow_Temperature_Cel -O---K   059   034   045    Past 41 (Min/Max 40/42 #2196)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    259
193 Load_Cycle_Count        -O--CK   095   095   000    -    11698
194 Temperature_Celsius     -O---K   041   066   000    -    41 (0 14 0 0 0)
197 Current_Pending_Sector  -O--C-   070   069   000    -    5000
198 Offline_Uncorrectable   ----C-   070   069   000    -    5000
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    5731h+12m+47.031s
241 Total_LBAs_Written      ------   100   253   000    -    4319033854268
242 Total_LBAs_Read         ------   100   253   000    -    63966471364566
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS      20  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    5067  Device vendor specific log
0xbd       GPL     VS     512  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 489 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 489 [8] occurred at disk power-on lifetime: 14670 hours (611 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  04 -- 71 00 04 00 00 00 32 00 91 e0 00

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  ea 00 00 00 00 00 00 03 c0 45 8f a0 00  3d+01:55:22.880  FLUSH CACHE EXT
  ca 00 00 00 a0 00 00 03 7b ae 00 e3 00  3d+01:55:22.879  WRITE DMA
  ca 00 00 00 20 00 00 03 5b ae 80 e3 00  3d+01:55:22.879  WRITE DMA
  ca 00 00 00 80 00 00 03 5b ae 00 e3 00  3d+01:55:22.879  WRITE DMA
  ca 00 00 00 80 00 00 03 5b ad 80 e3 00  3d+01:55:22.878  WRITE DMA

Error 488 [7] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 bb 9c 80 00 00  Error: UNC at LBA = 0x03bb9c80 = 62626944

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 03 bb 9c 80 e3 00  1d+05:46:33.823  READ DMA
  ca 00 00 00 08 00 00 01 e7 c8 00 e1 00  1d+05:46:30.933  WRITE DMA
  ea 00 00 00 00 00 00 22 2a 5e f7 a0 00  1d+05:46:30.906  FLUSH CACHE EXT
  35 00 00 00 08 00 00 21 e5 c8 00 e0 00  1d+05:46:30.906  WRITE DMA EXT
  ca 00 00 00 08 00 00 01 e5 c8 80 e1 00  1d+05:46:30.905  WRITE DMA

Error 487 [6] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 bb 9c 80 00 00  Error: UNC at LBA = 0x03bb9c80 = 62626944

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 03 bb 9c 80 e3 00  1d+05:45:01.439  READ DMA
  c8 00 00 00 08 00 00 03 ba a5 98 e3 00  1d+05:45:01.439  READ DMA
  c8 00 00 00 08 00 00 03 ba 9e c0 e3 00  1d+05:45:01.436  READ DMA
  c8 00 00 00 08 00 00 03 bc 31 b8 e3 00  1d+05:45:01.432  READ DMA
  c8 00 00 00 08 00 00 03 bc 2c 90 e3 00  1d+05:45:01.430  READ DMA

Error 486 [5] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 bb 9c 80 00 00  Error: UNC at LBA = 0x03bb9c80 = 62626944

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 03 bb 9c 80 e3 00  1d+05:44:58.506  READ DMA
  c8 00 00 00 08 00 00 03 bb 86 d0 e3 00  1d+05:44:58.506  READ DMA
  c8 00 00 00 08 00 00 03 bb 33 08 e3 00  1d+05:44:58.506  READ DMA
  c8 00 00 00 08 00 00 03 ba de d8 e3 00  1d+05:44:58.501  READ DMA
  c8 00 00 00 08 00 00 03 ba d8 80 e3 00  1d+05:44:58.494  READ DMA

Error 485 [4] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 47 65 28 00 00  Error: UNC at LBA = 0x02476528 = 38233384

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 02 47 65 28 e2 00  7d+02:26:15.834  READ DMA
  c8 00 00 00 20 00 00 01 fa 04 20 e1 00  7d+02:26:15.820  READ DMA
  ca 00 00 00 20 00 00 03 42 49 30 e3 00  7d+02:26:15.819  WRITE DMA
  ca 00 00 00 08 00 00 03 42 37 a8 e3 00  7d+02:26:15.819  WRITE DMA
  ca 00 00 00 08 00 00 03 42 33 98 e3 00  7d+02:26:15.819  WRITE DMA

Error 484 [3] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 47 65 28 00 00  Error: UNC at LBA = 0x02476528 = 38233384

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 02 47 65 28 e2 00  7d+02:26:12.815  READ DMA
  c8 00 00 00 08 00 00 02 47 65 20 e2 00  7d+02:26:12.814  READ DMA
  c8 00 00 00 08 00 00 02 47 65 08 e2 00  7d+02:26:12.811  READ DMA
  c8 00 00 00 08 00 00 02 47 65 00 e2 00  7d+02:26:12.788  READ DMA
  c8 00 00 00 08 00 00 03 15 82 80 e3 00  7d+02:26:12.788  READ DMA

Error 483 [2] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 02 47 65 28 00 00  Error: UNC at LBA = 0x02476528 = 38233384

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 04 00 00 00 02 47 64 00 e0 00  7d+02:26:09.586  READ DMA EXT
  c8 00 00 00 10 00 00 03 15 82 70 e3 00  7d+02:26:09.583  READ DMA
  25 00 00 04 00 00 00 02 47 60 00 e0 00  7d+02:26:09.577  READ DMA EXT
  c8 00 00 00 08 00 00 03 15 7e 20 e3 00  7d+02:26:09.576  READ DMA
  25 00 00 04 00 00 00 02 47 5c 00 e0 00  7d+02:26:09.574  READ DMA EXT

Error 482 [1] occurred at disk power-on lifetime: 14345 hours (597 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 03 15 c3 58 00 00  Error: UNC at LBA = 0x0315c358 = 51757912

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  c8 00 00 00 08 00 00 03 15 c3 58 e3 00  6d+13:31:24.909  READ DMA
  c8 00 00 00 08 00 00 03 1b d0 c8 e3 00  6d+13:31:24.907  READ DMA
  c8 00 00 00 08 00 00 03 1b d0 60 e3 00  6d+13:31:24.900  READ DMA
  c8 00 00 00 08 00 00 03 1b d0 28 e3 00  6d+13:31:24.900  READ DMA
  c8 00 00 00 08 00 00 03 1b d0 00 e3 00  6d+13:31:24.900  READ DMA

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    41 Celsius
Power Cycle Min/Max Temperature:     40/42 Celsius
Lifetime    Min/Max Temperature:     14/66 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            2  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS