04.01-DSL-2520U-adsl-setup.txt

   WAN Connection

   The DSL WAN connection can be separated virtually into multiple channels by
   assigning different VPI/VCI in each Permanent Virtual Circuit (PVC). In
   each PVC you can also set the connection protocol to be PPP, Dynamic IP,
   Static IP or Bridge mode.

                           WAN Connection :  [PVC0]

   Connection IP Version

   The DSL WAN connection can be Ipv4, IPv6 or IPv4/IPv6 mixed mode.

                IP Version :  (*) IPv4 ( ) IPv4/IPv6 ( ) IPv6

   Manual ADSL Connection Setup

   Please select the appropriate option to connect to your ISP.
   (*) PPPoE/PPPoA        : ISP uses PPPoE/PPPoA.(For most DSL users)
   ( ) Dynamic IP Address : ISP uses Dynamic IP Address over DSL.
   ( ) Static IP Address  : ISP uses Static IP assignments.
   ( ) Bridge Mode        : ISP uses Bridge Mode.

   PPPoE/PPPoA Internet Connection Type :

   Enter the information provided by your Internet Service Provider (ISP).

              Username:
              Password:
          Service Name:
       Connection Type: [PPPoE LLC___]
                   MTU: 1500________________(0 means default value 1492bytes)
         Idle Time Out: 0___________________Minutes (0 = Always On)
        Authentication: [Auto]
                   NAT: [Enable_]
                  IGMP: [disable]
         Default Route: [Enable_]

      DHCP IPv6 Enable: ( ) DHCP   (*) SLACC
        DHCP PD Enable: ( ) Enable   (*) Disable
             MLD Proxy: ( ) Enable   (*) Disable

                   VPI: 1___________________
                   VCI: 32__________________
       Virtual Circuit: [Enable_]
      Service Category: [UBR___]
                   PCR: 0_____cells/second
                   SCR: 0_____cells/second
                   MBS: 0_____cells