0TA_CMoz

/*
 * USE THIS FOR ALL NEW BOARDS 
 * TO ENABlE WIRELESS UPLOAD OF CODE
 * @CMoz
 * Working and uploaded code to ESP 32 board
 *
 * edited oct 2020
 */
 
#include "OTA.h"

unsigned long entry;

void setup() {
  Serial.begin(115200);
  Serial.println("Booting");

  ArduinoOTA.setHostname("ilyware_V1"); //my board name to recognise it
  setupOTA("ilyware"); 

  //setupOTA();

  // your code

}

void loop() {
  #ifndef ESP32_RTOS
  ArduinoOTA.handle();
  #endif
  
  ArduinoOTA.handle();

  delay(20);

  // your code here

}

OTA.h

#ifdef ESP32
#include <WiFi.h>
#include <ESPmDNS.h>
#else
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#endif


#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include <credentials.h>

const char* ssid = "your SSID"; // change these
const char* password = "your PASSWORD"; //change these or use the credentials.h file

#if defined(ESP32_RTOS) && defined(ESP32)
void taskOne( void * parameter )
{
  ArduinoOTA.handle();
  delay(3500);
}
#endif


void setupOTA(const char* nameprefix) {
  const int maxlen = 40;
  char fullhostname[maxlen];
  uint8_t mac[6];
  WiFi.macAddress(mac);
  snprintf(fullhostname, maxlen, "%s-%02x%02x%02x", nameprefix, mac[3], mac[4], mac[5]);
  ArduinoOTA.setHostname(fullhostname);
 

  
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  while (WiFi.waitForConnectResult() != WL_CONNECTED) {
    Serial.println("Connection Failed! Rebooting...");
    delay(5000);
    ESP.restart();
  }

  // Port defaults to 3232
  // ArduinoOTA.setPort(3232);

  // No authentication by default
  // ArduinoOTA.setPassword("admin");

  // Password can be set with it's md5 value as well
  // MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
  // ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");

  ArduinoOTA.onStart([]() {
    String type;
    if (ArduinoOTA.getCommand() == U_FLASH)
      type = "sketch";
    else // U_SPIFFS
      type = "filesystem";

    // NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
    Serial.println("Start updating " + type);
  });
  ArduinoOTA.onEnd([]() {
    Serial.println("\nEnd");
  });
  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
    Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
  });
  ArduinoOTA.onError([](ota_error_t error) {
    Serial.printf("Error[%u]: ", error);
    if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
    else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
    else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
    else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
    else if (error == OTA_END_ERROR) Serial.println("End Failed");
  });

  ArduinoOTA.begin();

  Serial.println("OTA Initialized");
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

#if defined(ESP32_RTOS) && defined(ESP32)
  xTaskCreate(
    ota_handle,          /* Task function. */
    "OTA_HANDLE",        /* String with name of task. */
    10000,            /* Stack size in bytes. */
    NULL,             /* Parameter passed as input of the task */
    1,                /* Priority of the task. */
    NULL);            /* Task handle. */
#endif
}