colelawrence/.nvidia-settings-rc

## .nvidia-settings-rc
#
# /home/colelawrence/.nvidia-settings-rc
#
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sun Aug  7 13:17:23 2016
#

# ConfigProperties:

RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = Memory_Used_(GPU_0),Yes,3000

# Attributes:

0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=1
0/FSAAAppEnhanced=0
[DPY:DVI-D-0]/Dithering=0
[DPY:DVI-D-0]/DitheringMode=0
[DPY:DVI-D-0]/DitheringDepth=0
[DPY:DVI-D-0]/ColorSpace=0
[DPY:DVI-D-0]/ColorRange=0
[DPY:DVI-D-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/ColorSpace=0
[DPY:HDMI-0]/ColorRange=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:DP-0]/Dithering=0
[DPY:DP-0]/DitheringMode=0
[DPY:DP-0]/DitheringDepth=0
[DPY:DP-0]/ColorSpace=0
[DPY:DP-0]/ColorRange=0
[DPY:DP-0]/SynchronousPaletteUpdates=0
[DPY:DP-1]/Dithering=0
[DPY:DP-1]/DitheringMode=0
[DPY:DP-1]/DitheringDepth=0
[DPY:DP-1]/ColorSpace=0
[DPY:DP-1]/ColorRange=0
[DPY:DP-1]/SynchronousPaletteUpdates=0
[DPY:DP-2]/RedBrightness=0.000000
[DPY:DP-2]/GreenBrightness=0.000000
[DPY:DP-2]/BlueBrightness=0.000000
[DPY:DP-2]/RedContrast=0.000000
[DPY:DP-2]/GreenContrast=0.000000
[DPY:DP-2]/BlueContrast=0.000000
[DPY:DP-2]/RedGamma=1.000000
[DPY:DP-2]/GreenGamma=1.000000
[DPY:DP-2]/BlueGamma=1.000000
[DPY:DP-2]/Dithering=0
[DPY:DP-2]/DitheringMode=0
[DPY:DP-2]/DitheringDepth=0
[DPY:DP-2]/DigitalVibrance=0
[DPY:DP-2]/ColorSpace=0
[DPY:DP-2]/ColorRange=0
[DPY:DP-2]/SynchronousPaletteUpdates=0
[DPY:DP-3]/Dithering=0
[DPY:DP-3]/DitheringMode=0
[DPY:DP-3]/DitheringDepth=0
[DPY:DP-3]/ColorSpace=0
[DPY:DP-3]/ColorRange=0
[DPY:DP-3]/SynchronousPaletteUpdates=0
[DPY:DP-4]/Dithering=0
[DPY:DP-4]/DitheringMode=0
[DPY:DP-4]/DitheringDepth=0
[DPY:DP-4]/ColorSpace=0
[DPY:DP-4]/ColorRange=0
[DPY:DP-4]/SynchronousPaletteUpdates=0
[DPY:DP-5]/Dithering=0
[DPY:DP-5]/DitheringMode=0
[DPY:DP-5]/DitheringDepth=0
[DPY:DP-5]/ColorSpace=0
[DPY:DP-5]/ColorRange=0
[DPY:DP-5]/SynchronousPaletteUpdates=0

## .profile
# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
	. "$HOME/.bashrc"
    fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
fi

## .vimrc
set nocompatible

## .xmodmap
remove Lock = Caps_Lock
keysym Caps_Lock = Control_L
add Control = Control_L

## .zshrc
#alias python=python3

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh" # This loads nvm


# Path to your oh-my-zsh installation.
  export ZSH=/home/colelawrence/.oh-my-zsh

# Set name of the theme to load.
# Look in ~/.oh-my-zsh/themes/
# Optionally, if you set this to "random", it'll load a random theme each
# time that oh-my-zsh is loaded.
ZSH_THEME="robbyrussell"

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion. Case
# sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"

# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_ZSH_DAYS=13

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

# User configuration

export PATH="/usr/bin:/bin:/usr/sbin:/sbin:$PATH"
# export MANPATH="/usr/local/man:$MANPATH"

source $ZSH/oh-my-zsh.sh

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-arch x86_64"

# ssh
# export SSH_KEY_PATH="~/.ssh/dsa_id"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"

## tensorflow-setup.md

      
    Raw
  

              tensorflow-setup.md
            
          
    setting up


install python with pip (2.7)
run pip install virtualenv
Set up venv
cd my_project_folder
virtualenv venv

Download Python 3.4 source
wget python-3.4.tar.gz
# extract
cd python-3.4
./configure
make
# link it
sudo ln -s ./python /usr/bin/python34

Use the binary in your project
virtualenv -p /usr/bin/python34 venv
# activate
source venv/bin/activate


Docker?
Install docker somehow
Then https://hub.docker.com/r/tensorflow/tensorflow/
Tada
Use tensorflow docker
https://github.com/tensorflow/tensorflow/tree/master/tensorflow/tools/docker
from https://docs.docker.com/engine/installation/linux/ubuntulinux/
sudo service docker start

Need to run everything sudo docker run ... if you want to connect to docker daemon
We can set up docker group to mitigate this...

Image
nvidia-docker for docker access to nvidia graphics card https://github.com/NVIDIA/nvidia-docker
sudo nvidia-docker run -it -p 8888:8888 gcr.io/tensorflow/tensorflow:latest-gpu
Opens Jupyter notebook, pretty cool, I haven't actually used a Jupyter notebook before.
	#
	# /home/colelawrence/.nvidia-settings-rc
	#
	# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
	# Generated on Sun Aug 7 13:17:23 2016
	#

	# ConfigProperties:

	RcFileLocale = C
	ToolTips = Yes
	DisplayStatusBar = Yes
	SliderTextEntries = Yes
	IncludeDisplayNameInConfigFile = No
	ShowQuitDialog = Yes
	UpdateRulesOnProfileNameChange = Yes
	Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
	Timer = Thermal_Monitor_(GPU_0),Yes,1000
	Timer = Memory_Used_(GPU_0),Yes,3000

	# Attributes:

	0/SyncToVBlank=1
	0/LogAniso=0
	0/FSAA=0
	0/TextureClamping=1
	0/FXAA=0
	0/AllowFlipping=1
	0/FSAAAppControlled=1
	0/LogAnisoAppControlled=1
	0/OpenGLImageSettings=1
	0/FSAAAppEnhanced=0
	[DPY:DVI-D-0]/Dithering=0
	[DPY:DVI-D-0]/DitheringMode=0
	[DPY:DVI-D-0]/DitheringDepth=0
	[DPY:DVI-D-0]/ColorSpace=0
	[DPY:DVI-D-0]/ColorRange=0
	[DPY:DVI-D-0]/SynchronousPaletteUpdates=0
	[DPY:HDMI-0]/Dithering=0
	[DPY:HDMI-0]/DitheringMode=0
	[DPY:HDMI-0]/DitheringDepth=0
	[DPY:HDMI-0]/ColorSpace=0
	[DPY:HDMI-0]/ColorRange=0
	[DPY:HDMI-0]/SynchronousPaletteUpdates=0
	[DPY:DP-0]/Dithering=0
	[DPY:DP-0]/DitheringMode=0
	[DPY:DP-0]/DitheringDepth=0
	[DPY:DP-0]/ColorSpace=0
	[DPY:DP-0]/ColorRange=0
	[DPY:DP-0]/SynchronousPaletteUpdates=0
	[DPY:DP-1]/Dithering=0
	[DPY:DP-1]/DitheringMode=0
	[DPY:DP-1]/DitheringDepth=0
	[DPY:DP-1]/ColorSpace=0
	[DPY:DP-1]/ColorRange=0
	[DPY:DP-1]/SynchronousPaletteUpdates=0
	[DPY:DP-2]/RedBrightness=0.000000
	[DPY:DP-2]/GreenBrightness=0.000000
	[DPY:DP-2]/BlueBrightness=0.000000
	[DPY:DP-2]/RedContrast=0.000000
	[DPY:DP-2]/GreenContrast=0.000000
	[DPY:DP-2]/BlueContrast=0.000000
	[DPY:DP-2]/RedGamma=1.000000
	[DPY:DP-2]/GreenGamma=1.000000
	[DPY:DP-2]/BlueGamma=1.000000
	[DPY:DP-2]/Dithering=0
	[DPY:DP-2]/DitheringMode=0
	[DPY:DP-2]/DitheringDepth=0
	[DPY:DP-2]/DigitalVibrance=0
	[DPY:DP-2]/ColorSpace=0
	[DPY:DP-2]/ColorRange=0
	[DPY:DP-2]/SynchronousPaletteUpdates=0
	[DPY:DP-3]/Dithering=0
	[DPY:DP-3]/DitheringMode=0
	[DPY:DP-3]/DitheringDepth=0
	[DPY:DP-3]/ColorSpace=0
	[DPY:DP-3]/ColorRange=0
	[DPY:DP-3]/SynchronousPaletteUpdates=0
	[DPY:DP-4]/Dithering=0
	[DPY:DP-4]/DitheringMode=0
	[DPY:DP-4]/DitheringDepth=0
	[DPY:DP-4]/ColorSpace=0
	[DPY:DP-4]/ColorRange=0
	[DPY:DP-4]/SynchronousPaletteUpdates=0
	[DPY:DP-5]/Dithering=0
	[DPY:DP-5]/DitheringMode=0
	[DPY:DP-5]/DitheringDepth=0
	[DPY:DP-5]/ColorSpace=0
	[DPY:DP-5]/ColorRange=0
	[DPY:DP-5]/SynchronousPaletteUpdates=0
	# ~/.profile: executed by the command interpreter for login shells.
	# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
	# exists.
	# see /usr/share/doc/bash/examples/startup-files for examples.
	# the files are located in the bash-doc package.

	# the default umask is set in /etc/profile; for setting the umask
	# for ssh logins, install and configure the libpam-umask package.
	#umask 022

	# if running bash
	if [ -n "$BASH_VERSION" ]; then
	# include .bashrc if it exists
	if [ -f "$HOME/.bashrc" ]; then
	. "$HOME/.bashrc"
	fi
	fi

	# set PATH so it includes user's private bin if it exists
	if [ -d "$HOME/bin" ] ; then
	PATH="$HOME/bin:$PATH"
	fi
	remove Lock = Caps_Lock
	keysym Caps_Lock = Control_L
	add Control = Control_L
	#alias python=python3

	export NVM_DIR="$HOME/.nvm"
	[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh" # This loads nvm


	# Path to your oh-my-zsh installation.
	export ZSH=/home/colelawrence/.oh-my-zsh

	# Set name of the theme to load.
	# Look in ~/.oh-my-zsh/themes/
	# Optionally, if you set this to "random", it'll load a random theme each
	# time that oh-my-zsh is loaded.
	ZSH_THEME="robbyrussell"

	# Uncomment the following line to use case-sensitive completion.
	# CASE_SENSITIVE="true"

	# Uncomment the following line to use hyphen-insensitive completion. Case
	# sensitive completion must be off. _ and - will be interchangeable.
	# HYPHEN_INSENSITIVE="true"

	# Uncomment the following line to disable bi-weekly auto-update checks.
	# DISABLE_AUTO_UPDATE="true"

	# Uncomment the following line to change how often to auto-update (in days).
	# export UPDATE_ZSH_DAYS=13

	# Uncomment the following line to disable colors in ls.
	# DISABLE_LS_COLORS="true"

	# Uncomment the following line to disable auto-setting terminal title.
	# DISABLE_AUTO_TITLE="true"

	# Uncomment the following line to enable command auto-correction.
	# ENABLE_CORRECTION="true"

	# Uncomment the following line to display red dots whilst waiting for completion.
	# COMPLETION_WAITING_DOTS="true"

	# Uncomment the following line if you want to disable marking untracked files
	# under VCS as dirty. This makes repository status check for large repositories
	# much, much faster.
	# DISABLE_UNTRACKED_FILES_DIRTY="true"

	# Uncomment the following line if you want to change the command execution time
	# stamp shown in the history command output.
	# The optional three formats: "mm/dd/yyyy"\|"dd.mm.yyyy"\|"yyyy-mm-dd"
	# HIST_STAMPS="mm/dd/yyyy"

	# Would you like to use another custom folder than $ZSH/custom?
	# ZSH_CUSTOM=/path/to/new-custom-folder

	# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
	# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
	# Example format: plugins=(rails git textmate ruby lighthouse)
	# Add wisely, as too many plugins slow down shell startup.
	plugins=(git)

	# User configuration

	export PATH="/usr/bin:/bin:/usr/sbin:/sbin:$PATH"
	# export MANPATH="/usr/local/man:$MANPATH"

	source $ZSH/oh-my-zsh.sh

	# You may need to manually set your language environment
	# export LANG=en_US.UTF-8

	# Preferred editor for local and remote sessions
	# if [[ -n $SSH_CONNECTION ]]; then
	# export EDITOR='vim'
	# else
	# export EDITOR='mvim'
	# fi

	# Compilation flags
	# export ARCHFLAGS="-arch x86_64"

	# ssh
	# export SSH_KEY_PATH="~/.ssh/dsa_id"

	# Set personal aliases, overriding those provided by oh-my-zsh libs,
	# plugins, and themes. Aliases can be placed here, though oh-my-zsh
	# users are encouraged to define aliases within the ZSH_CUSTOM folder.
	# For a full list of active aliases, run `alias`.
	#
	# Example aliases
	# alias zshconfig="mate ~/.zshrc"
	# alias ohmyzsh="mate ~/.oh-my-zsh"