Last active
January 22, 2017 20:32
-
-
Save companje/c2cc92a513bd5aae5f0ec54aaefded60 to your computer and use it in GitHub Desktop.
Doodle3D WiFi-Box OpenWrt config files
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config defaults | |
option syn_flood 1 | |
option input ACCEPT | |
option output ACCEPT | |
option forward REJECT | |
# Uncomment this line to disable ipv6 rules | |
# option disable_ipv6 1 | |
config zone | |
option name lan | |
list network 'lan' | |
option input ACCEPT | |
option output ACCEPT | |
option forward ACCEPT | |
config zone | |
option name wan | |
list network 'wan' | |
list network 'wan6' | |
option input REJECT | |
option output ACCEPT | |
option forward REJECT | |
option masq 1 | |
option mtu_fix 1 | |
config forwarding | |
option src lan | |
option dest wan | |
# We need to accept udp packets on port 68, | |
# see https://dev.openwrt.org/ticket/4108 | |
config rule | |
option name Allow-DHCP-Renew | |
option src wan | |
option proto udp | |
option dest_port 68 | |
option target ACCEPT | |
option family ipv4 | |
# Allow IPv4 ping | |
config rule | |
option name Allow-Ping | |
option src wan | |
option proto icmp | |
option icmp_type echo-request | |
option family ipv4 | |
option target ACCEPT | |
# Allow DHCPv6 replies | |
# see https://dev.openwrt.org/ticket/10381 | |
config rule | |
option name Allow-DHCPv6 | |
option src wan | |
option proto udp | |
option src_ip fe80::/10 | |
option src_port 547 | |
option dest_ip fe80::/10 | |
option dest_port 546 | |
option family ipv6 | |
option target ACCEPT | |
# Allow essential incoming IPv6 ICMP traffic | |
config rule | |
option name Allow-ICMPv6-Input | |
option src wan | |
option proto icmp | |
list icmp_type echo-request | |
list icmp_type echo-reply | |
list icmp_type destination-unreachable | |
list icmp_type packet-too-big | |
list icmp_type time-exceeded | |
list icmp_type bad-header | |
list icmp_type unknown-header-type | |
list icmp_type router-solicitation | |
list icmp_type neighbour-solicitation | |
list icmp_type router-advertisement | |
list icmp_type neighbour-advertisement | |
option limit 1000/sec | |
option family ipv6 | |
option target ACCEPT | |
# Allow essential forwarded IPv6 ICMP traffic | |
config rule | |
option name Allow-ICMPv6-Forward | |
option src wan | |
option dest * | |
option proto icmp | |
list icmp_type echo-request | |
list icmp_type echo-reply | |
list icmp_type destination-unreachable | |
list icmp_type packet-too-big | |
list icmp_type time-exceeded | |
list icmp_type bad-header | |
list icmp_type unknown-header-type | |
option limit 1000/sec | |
option family ipv6 | |
option target ACCEPT | |
# include a file with users custom iptables rules | |
config include | |
option path /etc/firewall.user | |
### EXAMPLE CONFIG SECTIONS | |
# do not allow a specific ip to access wan | |
#config rule | |
# option src lan | |
# option src_ip 192.168.45.2 | |
# option dest wan | |
# option proto tcp | |
# option target REJECT | |
# block a specific mac on wan | |
#config rule | |
# option dest wan | |
# option src_mac 00:11:22:33:44:66 | |
# option target REJECT | |
# block incoming ICMP traffic on a zone | |
#config rule | |
# option src lan | |
# option proto ICMP | |
# option target DROP | |
# port redirect port coming in on wan to lan | |
#config redirect | |
# option src wan | |
# option src_dport 80 | |
# option dest lan | |
# option dest_ip 192.168.16.235 | |
# option dest_port 80 | |
# option proto tcp | |
# port redirect of remapped ssh port (22001) on wan | |
#config redirect | |
# option src wan | |
# option src_dport 22001 | |
# option dest lan | |
# option dest_port 22 | |
# option proto tcp | |
# allow IPsec/ESP and ISAKMP passthrough | |
#config rule | |
# option src wan | |
# option dest lan | |
# option protocol esp | |
# option target ACCEPT | |
#config rule | |
# option src wan | |
# option dest lan | |
# option src_port 500 | |
# option dest_port 500 | |
# option proto udp | |
# option target ACCEPT | |
### FULL CONFIG SECTIONS | |
#config rule | |
# option src lan | |
# option src_ip 192.168.45.2 | |
# option src_mac 00:11:22:33:44:55 | |
# option src_port 80 | |
# option dest wan | |
# option dest_ip 194.25.2.129 | |
# option dest_port 120 | |
# option proto tcp | |
# option target REJECT | |
#config redirect | |
# option src lan | |
# option src_ip 192.168.45.2 | |
# option src_mac 00:11:22:33:44:55 | |
# option src_port 1024 | |
# option src_dport 80 | |
# option dest_ip 194.25.2.129 | |
# option dest_port 120 | |
# option proto tcp |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config interface 'loopback' | |
option ifname 'lo' | |
option proto 'static' | |
option ipaddr '127.0.0.1' | |
option netmask '255.0.0.0' | |
config globals 'globals' | |
option ula_prefix 'fd0a:3dff:5248::/48' | |
config interface 'lan' | |
option ifname 'eth0' | |
option force_link '1' | |
option type 'bridge' | |
option proto 'static' | |
option netmask '255.255.255.0' | |
option ip6assign '60' | |
option ipaddr '192.168.5.1' | |
config interface 'wlan' | |
option netmask '255.255.255.0' | |
option proto 'static' | |
option ipaddr '192.168.10.1' | |
### AFTER SWITCHING TO STATION MODE ### | |
config interface 'wlan' | |
option proto 'dhcp' | |
### END - AFTER SWITCHING TO STATION MODE ### |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config system | |
option timezone 'UTC' | |
option hostname 'wifibox' | |
option log_size '64' | |
config timeserver 'ntp' | |
list server '0.openwrt.pool.ntp.org' | |
list server '1.openwrt.pool.ntp.org' | |
list server '2.openwrt.pool.ntp.org' | |
list server '3.openwrt.pool.ntp.org' | |
option enabled '1' | |
option enable_server '0' | |
config led 'led_usb' | |
option name 'USB' | |
option sysfs 'tp-link:green:3g' | |
option trigger 'usbdev' | |
option dev '1-1' | |
option interval '50' | |
config led 'led_wlan' | |
option name 'WLAN' | |
option sysfs 'tp-link:green:wlan' | |
option trigger 'phy0tpt' | |
config led 'led_lan' | |
option name 'LAN' | |
option sysfs 'tp-link:green:lan' | |
option trigger 'netdev' | |
option dev 'eth0' | |
option mode 'link tx rx' |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config uhttpd 'main' | |
list listen_http '0.0.0.0:80' | |
list listen_http '[::]:80' | |
list listen_https '0.0.0.0:443' | |
list listen_https '[::]:443' | |
option home '/www' | |
option rfc1918_filter '1' | |
option max_connections '100' | |
option cert '/etc/uhttpd.crt' | |
option key '/etc/uhttpd.key' | |
option cgi_prefix '/cgi-bin' | |
option script_timeout '60' | |
option network_timeout '30' | |
option http_keepalive '20' | |
option tcp_keepalive '1' | |
option lua_handler '/usr/share/lua/wifibox/main.lua' | |
option lua_prefix '/d3dapi' | |
option max_requests '10' | |
option error_page '/redirect.html' | |
option no_dirlist '1' | |
config cert 'px5g' | |
option days '730' | |
option bits '1024' | |
option country 'DE' | |
option state 'Berlin' | |
option location 'Berlin' | |
option commonname 'OpenWrt' |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config settings 'system' | |
option log_path '/tmp' | |
option api_log_filename 'wifibox.log' | |
option p3d_log_basename 'print3d' | |
config settings 'general' | |
option printer_type 'ultimaker' | |
option system_log_level 'info' |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
config wifi-device 'radio0' | |
option type 'mac80211' | |
option hwmode '11g' | |
option path 'platform/ar933x_wmac' | |
option htmode 'HT20' | |
option disabled '0' | |
### AFTER SWITCHING TO STATION MODE ### | |
config wifi-iface | |
option disabled '0' | |
option network 'wlan' | |
option encryption 'psk2' | |
option device 'radio0' | |
option mode 'sta' | |
option key 'XXXXXXXXXXXX' | |
option ssid 'Baksteen' | |
### END - AFTER SWITCHING TO STATION MODE ### | |
config wifi-iface | |
option network 'wlan' | |
option encryption 'none' | |
option device 'radio0' | |
option mode 'ap' | |
option ssid 'Doodle3D-8725A7' | |
option disabled '0' | |
config wifi-iface | |
option device 'radio0' | |
option network 'lan' | |
option mode 'ap' | |
option ssid 'OpenWrt' | |
option encryption 'nconfig dnsmasq | |
option domainneeded '1' | |
option boguspriv '1' | |
option filterwin2k '0' | |
option localise_queries '1' | |
option rebind_protection '1' | |
option rebind_localhost '1' | |
option local '/lan/' | |
option domain 'lan' | |
option expandhosts '1' | |
option nonegcache '0' | |
option authoritative '1' | |
option readethers '1' | |
option leasefile '/tmp/dhcp.leases' | |
option resolvfile '/tmp/resolv.conf.auto' | |
list address '/#/192.168.10.1' | |
config dhcp 'lan' | |
option interface 'lan' | |
option start '100' | |
option limit '150' | |
option leasetime '12h' | |
option dhcpv6 'server' | |
option ra 'server' | |
option dhcp_option '3 6' | |
config dhcp 'wan' | |
option interface 'wan' | |
option ignore '1' | |
config odhcpd 'odhcpd' | |
option maindhcp '0' | |
option leasefile '/tmp/hosts/odhcpd' | |
option leasetrigger '/usr/sbin/odhcpd-update' | |
config dhcp 'wlan' | |
option start '100' | |
option leasetime '12h' | |
option limit '150' | |
option interface 'wlan' |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment