gistfile1.txt

U-Boot 2010.09 (Nov 11 2010 - 14:22:07)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
*** Warning - bad CRC or NAND, using default environment

In:    serial
Out:   serial
Err:   serial
Board revision: 1
Direct connection on mmc2
No EEPROM on expansion board
Die ID #609400040000000004039f220200f012
Net:   smc911x-0
Hit any key to stop autoboot:  0 
I2C read: I/O error
I2C read: I/O error
mmc1 is available
reading boot.scr

709 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
reading uImage

3016024 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 83000000 ...
   Image Name:   Linux-2.6.32
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3015960 Bytes = 2.9 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux...............................................................................................................................................................................................

gistfile2.txt

Overo # printenv
bootcmd=if mmc init; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; else run nandboot; fi
bootdelay=5
baudrate=115200
loadaddr=0x82000000
console=ttyS2,115200n8
mpurate=500
vram=12M
dvimode=1024x768MR-16@60
defaultdisplay=dvi
mmcroot=/dev/mmcblk0p2 rw
mmcrootfstype=ext3 rootwait
nandroot=/dev/mtdblock4 rw
nandrootfstype=jffs2
mmcargs=setenv bootargs console=${console} mpurate=${mpurate} vram=${vram} omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay} root=${mmcroot} rootfstype=${mmcrootfstype}
nandargs=setenv bootargs console=${console} mpurate=${mpurate} vram=${vram} omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay} root=${nandroot} rootfstype=${nandrootfstype}
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
loaduimage=fatload mmc 0 ${loadaddr} uImage
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 280000 400000; bootm ${loadaddr}
stdin=serial
stdout=serial
stderr=serial
dieid#=609400040000000004039f220200f012
ethact=smc911x-0

Environment size: 1226/131068 bytes

myuboot2bootscr.sh

mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "myubootenv" -d myubootenv.cmd boot.scr

myubootenv.cmd

setenv loaduimage 'fatload mmc 0 ${loadaddr} uImage'
setenv console ttyS2,115200n8
setenv loadaddr 0x82000000
setenv mpurate 720
setenv vram 4M
setenv mem 176M
setenv dvimode 1024x768MR-16@60
setenv defaultdisplay dvi
setenv mmcroot /dev/mmcblk0p2 rw
setenv mmcrootfstype ext3 rootwait
setenv ethaddr 00:00:00:FF:FF:FFsetenv mmcargs 'setenv bootargs console ${console} mpurate=${mpurate} vram=${vram} mem=${mem} omapfb.mode=dvi:${dvimode} omapfb.debug=y omapdss.def_disp=${defaultdisplay} root=${m
mcroot} rootfstype=${mmcrootfstype}'
setenv mmcboot 'echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}'
run loaduimage
run mmcboot