Instantly share code, notes, and snippets.

Embed
What would you like to do?
Personnaliser la page d'accueil de la PirateBox
#############################################################################
# PirateBox global config. /etc/init.d/piratebox setup to take effect
pb_ip="192.168.1.1"
pb_wireless_ssid="PirateBox - Share Freely"
pb_hostname="piratebox"
pb_usbdevice="/dev/sda1"
pb_usbmount="/mnt/usb"
pb_usbdir="$pb_usbmount/PirateBox"
pb_share="$pb_usbdir/Shared"
pb_extimg="$pb_usbdir/OpenWRT.img"
pb_extmount="/mnt/ext"
pb_swapimg="$pb_usbdir/OpenWRT.swap"
#############################################################################
# PirateBox helper functions
pb_nodns() {
# disable local DNS per dnsmasq
cp /tmp/resolv.conf.auto /tmp/resolv.conf
}
pb_usbwait() {
# wait for USB device to show up
if [ ! -e "$pb_usbdevice" ]
then
echo "Please connect USB disk. If it is already plugged-in,"
echo "wait for a few seconds, and if nothing happens, please"
echo "reconnect the device. Keep in mind that your router's"
echo "ports may not be able to supply enough power to"
echo "spin-up a USB HDD."
while [ ! -e "$pb_usbdevice" ]
do
sleep 1
echo -n "."
done
echo
echo "USB disk is now available. Continuing..."
fi
}
pb_ismounted() {
mount | grep "on $1 " >/dev/null
}
pb_mount() {
parts=$*
[ "$parts" == "-a" ] && parts="usb ext swap"
for part in $*
do
case $part in
usb)
pb_ismounted "$pb_usbmount" && continue
[ -d "$pb_usbmount" ] || mkdir -p "$pb_usbmount"
if ! mount "$pb_usbdevice" "$pb_usbmount"
then
echo "${initscript}: ERROR: unable to mount USB storage" >&2
exit 5
fi
;;
ext)
pb_ismounted "$pb_extmount" && continue
pb_mount usb
[ -d "$pb_extmount" ] || mkdir -p "$pb_extmount"
if ! mount -o loop,rw,sync "$pb_extimg" "$pb_extmount"
then
echo "${initscript}: ERROR: unable to mount ext image" >&2
exit 5
fi
;;
swap)
pb_mount usb
swapon "$pb_swapimg" &>/dev/null
;;
esac
done
}
pb_umount() {
parts=$*
[ "$parts" == "-a" ] && parts="swap ext usb"
for part in $*
do
case $part in
usb)
pb_ismounted "$pb_usbmount" || continue
pb_umount swap ext
if ! umount "$pb_usbmount"
then
echo "${initscript}: WARNING: unable to umount USB storage" >&2
fi
;;
ext)
# losetup -d here just in case user umounted manually
losetup -d /dev/loop0 &>/dev/null
pb_ismounted "$pb_extmount" || continue
if ! umount "$pb_extmount"
then
# PirateBox might still be running, so...
# silently try to stop PirateBox service
pb_stop &>/dev/null
sleep 2
if ! umount "$pb_extmount"
then
echo "${initscript}: WARNING: unable to umount ext image" >&2
fi
fi
losetup -d /dev/loop0
;;
swap)
#TODO: error handling
swapoff "$pb_swapimg" &>/dev/null
;;
esac
done
}
pb_uciadd() {
local config=$1 ; shift
local section=$1 ; shift
local type=$1 ; shift
[ -e "/etc/config/$config" ] || touch "/etc/config/$config"
uci show "$config.$section" &>/dev/null \
|| uci add "$config $section" &>/dev/null
uci set "$config.$section=$type"
}
pb_uciset() {
local config=$1 ; shift
local section=$1 ; shift
local type=$1 ; shift
pb_uciadd $config $section $type
for opt in "$@"
do
uci set "$config.$section.$opt"
done
uci commit
}
pb_netconfig() {
# reconfigure network
uci set "system.@system[0].hostname=$pb_hostname"
echo "127.0.0.1 $pb_hostname localhost." >/etc/hosts
echo "$pb_ip $pb_hostname" >>/etc/hosts
uci set "network.lan.ipaddr=$pb_ip"
#CAVE: wireless config might be platform specific
uci set "wireless.radio0.disabled=0"
uci set "wireless.@wifi-iface[0].ssid=$pb_wireless_ssid"
# redirect all 80/tcp traffic to the PirateBox
pb_uciset firewall piratebox redirect \
src=lan \
proto=tcp \
src_dport=80 \
dest_ip=$pb_ip \
dest_port=80
# redirect all DNS requests to PirateBox IP
pb_uciset dhcp piratebox domain \
name='#' \
ip=$pb_ip
# CAVE: ugly hack, patching a preinstalled file
# patch dnsmasq start script to properly handle domain wildcards
sed -i 's#^.*\${fqdn\%\.\*}\" ==.*$## ; s#^.*fqdn=\"\$fqdn.*$##' \
/etc/init.d/dnsmasq
}
pb_usbconfig() {
# prepare USB disk for mounting
[ -d "$pb_usbmount" ] || mkdir -p "$pb_usbmount"
pb_uciset fstab piratebox mount \
target=$pb_usbmount \
device=$pb_usbdevice \
fstype=vfat \
options=rw,sync \
enabled_fsck=0 \
enabled=1
}
pb_undoconfig() {
# undo config changes
uci delete dhcp.piratebox
uci delete firewall.piratebox
uci delete fstab.piratebox
uci delete fstab.pirateswap
uci set "system.@system[0].hostname=OpenWRT"
uci set "network.lan.ipaddr=192.168.1.1"
uci commit
cp /rom/etc/opkg.conf /etc/
cp /rom/etc/hosts /etc/
cp /rom/etc/init.d/dnsmasq /etc/init.d/
rm /usr/local
[ -d "$pb_usbmount" ] && rmdir "$pb_usbmount"
[ -d "$pb_extmount" ] && rmdir "$pb_extmount"
}
pb_needswap() {
[ ! -e "$pb_swapimg" ]
}
pb_mkswap() {
pb_umount swap
pb_mount usb
[ -d "$(dirname $pb_swapimg)" ] || mkdir -p "$(dirname $pb_swapimg)"
# create a swap file
dd if=/dev/zero of="$pb_swapimg" bs=1M count=32
mkswap "$pb_swapimg"
pb_uciset fstab swap pirateswap \
device=$pb_swapimg \
enabled=1
}
pb_needextimg() {
# [ ! -e "$pb_extimg" ]
# always re-create ext image because of opkg woes
true
}
pb_mkextimg() {
pb_umount ext
pb_mount usb
[ -d "$(dirname $pb_extimg)" ] || mkdir -p "$(dirname $pb_extimg)"
# use a preformatted image to get rid of e2fsprogs dependency
#dd if=/dev/zero of="$pb_extimg" bs=1M count=16
#echo y | mkfs.ext3 "$pb_extimg"
gzip -dc /usr/share/piratebox/OpenWRT.img.gz >"$pb_extimg"
[ -d "$pb_extmount" ] || mkdir -p "$pb_extmount"
pb_uciset fstab piratebox mount \
target=$pb_extmount \
device=$pb_extimg \
options=loop \
enabled=1
}
pb_init() {
echo "${initscript}: Mounting external USB storage..."
pb_mount usb
[ -d "$pb_usbdir" ] || mkdir -p "$pb_usbdir"
if pb_needswap
then
echo "${initscript}: Creating swapspace..."
pb_mkswap
fi
if pb_needextimg
then
echo "${initscript}: Creating ext loop image..."
pb_mkextimg
fi
pb_mount ext
# prepare opkg for /usr/local
grep "^dest piratebox" /etc/opkg.conf \
|| echo "dest piratebox $pb_extmount" >>/etc/opkg.conf
# link ext usr to /usr/local
ln -sf "$pb_extmount/usr" /usr/local
# fix for ext packages not installing to usr
[ -d "$pb_extmount/usr/lib" ] || mkdir -p "$pb_extmount/usr/lib"
ln -sf "$pb_extmount/usr/lib" "$pb_extmount/lib"
}
pb_update() {
pb_mount ext
# disable local DNS redirection
pb_nodns
# CAVE: ugly hack
# in case we were called from the postinst, remove opkg lock
[ -e /var/lock/opkg.lock ] && \
mv /var/lock/opkg.lock /var/lock/opkg.lock_
# install python to piratebox storage
if ! opkg update
then
echo "${initscript}: ERROR: No Internet connection on WAN port" >&2
exit 5
fi
opkg -d piratebox install python
# CAVE: ugly hack
# in case we were called from the postinst, restore opkg lock
[ -e /var/lock/opkg.lock_ ] && \
mv /var/lock/opkg.lock_ /var/lock/opkg.lock
# get PirateBox files
[ -d "$pb_share" ] || mkdir -p "$pb_share"
mkdir -p "$pb_share"
cd "$pb_share"
wget http://daviddarts.com/piratebox/piratebox-logo.png -O piratebox-logo.png
wget http://daviddarts.com/piratebox/.READ.ME.htm -O .READ.ME.htm
wget http://daviddarts.com/piratebox/.BACK.TO.MENU.htm -O .BACK.TO.MENU.htm
# adjust hostname
sed -i "s#http://piratebox#http://$pb_hostname#g" .READ.ME.htm
sed -i "s#http://piratebox#http://$pb_hostname#g" .BACK.TO.MENU.htm
# install PirateBox droopy port
[ -d /usr/local/bin ] || mkdir -p /usr/local/bin
cd /usr/local/bin
wget http://daviddarts.com/piratebox/droopy -O droopy
chmod +x droopy
}
pb_start() {
pb_mount usb ext swap
# PirateBox Welcome HTML
local html=$(cat <<EOF
<p><br>
<b>1.</b> Learn more about the project
<a href="http://$pb_hostname:8001/.READ.ME.htm"><b>here</b></a>.
</p>
<p>
<b>2.</b> Click above to begin sharing.
</p>
<p>
<b>3.</b> Browse and download files
<a href="http://$pb_hostname:8001"><b>here</b></a>.
</p>
<p>Use <b>#PirateBoxBru</b> to tell about me...<p>
EOF
)
export PATH=$PATH:/usr/local/bin
export LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib
cd "$pb_share"
start-stop-daemon -S -x python \
-p /var/run/${NAME}.droopy.pid \
-m -b -- \
/usr/local/bin/droopy \
-p "$pb_share/piratebox-logo.png" \
-d "$pb_share" -m "$html"
start-stop-daemon -S -x python \
-p /var/run/${NAME}.simple.pid \
-c nobody:nogroup -m -b -- \
-m SimpleHTTPServer 8001
}
pb_stop() {
# killing all piratebox processes
local pidfile
for pidfile in $(ls /var/run/${NAME}.*.pid 2>/dev/null)
do
start-stop-daemon -K -s HUP -p "${pidfile}"
rm -f "${pidfile}"
done
[ -z "${pidfile}" ] && echo "${initscript}: not running"
sleep 3
pb_umount usb
}
@cybermonde

This comment has been minimized.

Show comment
Hide comment
Owner

cybermonde commented Mar 27, 2012

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment