-
-
Save dadleyy/5aa7d1597d1517e28b1c985e02543be3 to your computer and use it in GitHub Desktop.
dunfell-yocto@f9a2748
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2021.01+krmp-f9a2748-gdce3935756 (Mar 01 2023 - 16:55:12 +0000) | |
Trying to boot from MMC2 | |
U-Boot 2021.01+krmp-f9a2748-gdce3935756 (Mar 01 2023 - 16:55:12 +0000) | |
CPU : AM335X-GP rev 2.1 | |
Model: TI AM335x BeagleBone Black | |
DRAM: 512 MiB | |
WDT: Started with servicing (60s timeout) | |
NAND: 0 MiB | |
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
Loading Environment from FAT... ** No device specified ** | |
<ethaddr> not set. Validating first E-fuse MAC | |
Net: eth2: ethernet@4a100000, eth3: usb_ether | |
Hit any key to stop autoboot: 2 1 0 | |
switch to partitions #0, OK | |
mmc1(part 0) is current device | |
Scanning mmc 1:1... | |
Found U-Boot script /boot.scr | |
2985 bytes read in 2 ms (1.4 MiB/s) | |
## Executing script at 80000000 | |
[KRMP]: script running against (dev 1) (type mmc) | |
[KRMP]: correcting console ahead of kernel recommendation | |
[KRMP]: checking for existing uboot.env file | |
[KRMP]: attempting to load uboot.env from FAT | |
131072 bytes read in 10 ms (12.5 MiB/s) | |
## Info: input data size = 179204 = 0x2BC04 | |
[KRMP]: initializing boot order + attempts | |
[KRMP]: BOOT_ORDER previously defined | |
[KRMP]: BOOT_A_LEFT not found, initializing | |
[KRMP]: BOOT_B_LEFT previously defined | |
[KRMP]: boot attempts - A[3] B[3] | |
[KRMP]: boot A being used for bootargs | |
[KRMP]: skipping B, bootargs previously set (rootfstype=ext4 console=ttyS0,115200n8 rootwait rw video=480x272 splash root=/dev/mmcblk1p2 rauc.slot=A) | |
5128704 bytes read in 328 ms (14.9 MiB/s) | |
[KRMP]: loading fdtfile - am335x-bonegreen.dtb | |
89565 bytes read in 8 ms (10.7 MiB/s) | |
[KRMP]: checking for cape device tree overlay | |
[KRMP]: setting device tree overlay address for file - BB-BONE-4D4C-01-00A1.dtbo | |
5681 bytes read in 3 ms (1.8 MiB/s) | |
Saving Environment to FAT... OK | |
[KRMP]: booting kernel (w/ rauc) | |
## Flattened Device Tree blob at 88000000 | |
Booting using the fdt blob at 0x88000000 | |
Loading Device Tree to 8ffe0000, end 8fffffff ... OK | |
Starting kernel ... | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 5.10.145-g9b11aaf2cd (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 9.5.0, GNU ld (GNU Binutils) 2.34.0.20200910) #1 PREEMPT Mon Dec 19 21:56:12 UTC 2022 | |
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green | |
[ 0.000000] Memory policy: Data cache writeback | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] cma: Failed to reserve 512 MiB | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] HighMem empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] CPU: All CPU(s) started in SVC mode. | |
[ 0.000000] AM335X ES2.1 (sgx neon) | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
[ 0.000000] Kernel command line: rootfstype=ext4 console=ttyS0,115200n8 rootwait rw video=480x272 splash root=/dev/mmcblk1p2 rauc.slot=A | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 500348K/522240K available (10240K kernel code, 757K rwdata, 3508K rodata, 1024K init, 415K bss, 21892K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 | |
[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ 0.000030] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ 0.000410] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 | |
[ 0.001755] Console: colour dummy device 80x30 | |
[ 0.001837] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) | |
[ 0.090487] pid_max: default: 32768 minimum: 301 | |
[ 0.090661] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.090676] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.091531] CPU: Testing write buffer coherency: ok | |
[ 0.091606] CPU0: Spectre v2: using BPIALL workaround | |
[ 0.092570] Setting up static identity map for 0x80100000 - 0x80100060 | |
[ 0.092735] rcu: Hierarchical SRCU implementation. | |
[ 0.092838] EFI services will not be available. | |
[ 0.093246] devtmpfs: initialized | |
[ 0.104764] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
[ 0.132951] DMA-API: preallocated 65536 debug entries | |
[ 0.132983] DMA-API: debugging enabled by kernel config | |
[ 0.133009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.133034] futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
[ 0.133247] pinctrl core: initialized pinctrl subsystem | |
[ 0.134164] DMI not present or invalid. | |
[ 0.134894] NET: Registered protocol family 16 | |
[ 0.135608] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
[ 0.153603] l3-aon-clkctrl:0000:0: failed to disable | |
[ 0.154772] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.154784] thermal_sys: Registered thermal governor 'bang_bang' | |
[ 0.154799] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.154807] thermal_sys: Registered thermal governor 'user_space' | |
[ 0.155435] cpuidle: using governor ladder | |
[ 0.155484] cpuidle: using governor menu | |
[ 1.225664] No ATAGs? | |
[ 1.225695] hw-breakpoint: debug architecture 0x4 unsupported. | |
[ 1.251856] iommu: Default domain type: Translated | |
[ 1.254048] SCSI subsystem initialized | |
[ 1.254534] mc: Linux media interface: v0.10 | |
[ 1.254576] videodev: Linux video capture interface: v2.00 | |
[ 1.254678] pps_core: LinuxPPS API ver. 1 registered | |
[ 1.254688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 1.254710] PTP clock support registered | |
[ 1.255669] Advanced Linux Sound Architecture Driver Initialized. | |
[ 1.257067] clocksource: Switched to clocksource dmtimer | |
[ 1.264684] NET: Registered protocol family 2 | |
[ 1.264977] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 1.266070] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
[ 1.266134] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.266176] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.266216] TCP: Hash tables configured (established 4096 bind 4096) | |
[ 1.266331] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.266353] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.266492] NET: Registered protocol family 1 | |
[ 1.267320] RPC: Registered named UNIX socket transport module. | |
[ 1.267340] RPC: Registered udp transport module. | |
[ 1.267348] RPC: Registered tcp transport module. | |
[ 1.267355] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 1.267374] PCI: CLS 0 bytes, default 64 | |
[ 1.268370] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
[ 1.269604] Initialise system trusted keyrings | |
[ 1.270037] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
[ 1.273667] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 1.274518] NFS: Registering the id_resolver key type | |
[ 1.274583] Key type id_resolver registered | |
[ 1.274593] Key type id_legacy registered | |
[ 1.274682] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 1.274696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 1.274734] ntfs: driver 2.1.32 [Flags: R/O]. | |
[ 1.275372] Key type asymmetric registered | |
[ 1.275393] Asymmetric key parser 'x509' registered | |
[ 1.275443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
[ 1.275456] io scheduler mq-deadline registered | |
[ 1.275464] io scheduler kyber registered | |
[ 1.533361] ti-sysc: probe of 44e31000.target-module failed with error -16 | |
[ 1.579944] ti-sysc: probe of 48040000.target-module failed with error -16 | |
[ 1.667650] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
[ 1.788685] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
[ 1.788735] edma 49000000.dma: TI EDMA DMA engine driver | |
[ 1.807569] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
[ 1.812139] pwm-backlight backlight: supply power not found, using dummy regulator | |
[ 1.860313] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled | |
[ 1.864677] printk: console [ttyS0] disabled | |
[ 1.864869] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 | |
[ 2.535100] printk: console [ttyS0] enabled | |
[ 2.541244] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 26, base_baud = 3000000) is a 8250 | |
[ 2.553160] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
[ 2.559692] random: crng init done | |
[ 2.565217] tilcdc-panel panel: failed to request enable GPIO | |
[ 2.571724] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 2.582301] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 2.592811] tilcdc 4830e000.lcdc: no encoders/connectors found | |
[ 2.623320] brd: module loaded | |
[ 2.633246] loop: module loaded | |
[ 2.697093] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
[ 2.707221] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
[ 2.716831] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
[ 2.723319] cpsw 4a100000.ethernet: ALE Table size 1024 | |
[ 2.728729] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) | |
[ 2.735973] cpsw 4a100000.ethernet: Detected MACID = b0:d5:cc:fb:60:3d | |
[ 2.744901] i2c /dev entries driver | |
[ 2.751278] cpuidle: enable-method property 'ti,am3352' found operations | |
[ 2.758828] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.765041] sdhci: Copyright(c) Pierre Ossman | |
[ 2.770542] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 2.778743] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
[ 2.787890] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 2.811140] NET: Registered protocol family 10 | |
[ 2.827735] Segment Routing with IPv6 | |
[ 2.831513] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 2.840621] NET: Registered protocol family 17 | |
[ 2.845471] Key type dns_resolver registered | |
[ 2.867802] omap_voltage_late_init: Voltage driver support not added | |
[ 2.874850] Loading compiled-in X.509 certificates | |
[ 2.900585] OMAP GPIO hardware version 0.1 | |
[ 2.923813] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA | |
[ 2.937626] tps65217-pmic: Failed to locate of_node [id: -1] | |
[ 2.950121] tps65217-bl: Failed to locate of_node [id: -1] | |
[ 2.958686] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
[ 2.964579] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
[ 2.972530] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
[ 2.981478] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
[ 2.992761] tilcdc-panel panel: found enable GPIO | |
[ 2.998132] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 3.008913] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 3.020906] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 | |
[ 3.031147] mmc1: new high speed MMC card at address 0001 | |
[ 3.036504] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB | |
[ 3.036784] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB | |
[ 3.037199] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB | |
[ 3.037422] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB, chardev (243:0) | |
[ 3.039542] mmcblk1: p1 p2 p3 | |
[ 3.074041] Console: switching to colour frame buffer device 60x34 | |
[ 3.130321] tilcdc 4830e000.lcdc: [drm] fb0: tilcdcdrmfb frame buffer device | |
[ 3.140561] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
[ 3.152585] ALSA device list: | |
[ 3.155593] No soundcards found. | |
[ 3.159843] sdhci-omap 48060000.mmc: Got CD GPIO | |
[ 3.164826] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator | |
[ 3.225352] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA | |
[ 3.272726] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 3.283333] VFS: Mounted root (ext4 filesystem) on device 179:2. | |
[ 3.291916] devtmpfs: mounted | |
[ 3.296463] Freeing unused kernel memory: 1024K | |
[ 3.317597] Run /sbin/init as init process | |
[ 3.527283] systemd[1]: System time before build time, advancing clock. | |
[ 3.556007] systemd[1]: systemd 244.5+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) | |
[ 3.578613] systemd[1]: Detected architecture arm. | |
Welcome to [1mPoky (Yocto Project Reference Distro) (Krumpled-Dunfell) 3.1.24 (dunfell)[0m! | |
[ 3.628417] systemd[1]: Set hostname to <beaglebone>. | |
[ 4.351045] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. | |
[ 4.363694] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | |
[ 4.376589] systemd[1]: Created slice system-getty.slice. | |
[[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m. | |
[ 4.420189] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
[[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. | |
[ 4.461876] systemd[1]: Created slice User and Session Slice. | |
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
[ 4.498964] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
[[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. | |
[ 4.538661] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. | |
[ 4.577987] systemd[1]: Reached target Paths. | |
[[0;32m OK [0m] Reached target [0;1;39mPaths[0m. | |
[ 4.590028] systemd[1]: Reached target Remote File Systems. | |
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
[ 4.627557] systemd[1]: Reached target Slices. | |
[[0;32m OK [0m] Reached target [0;1;39mSlices[0m. | |
[ 4.668002] systemd[1]: Reached target Swap. | |
[[0;32m OK [0m] Reached target [0;1;39mSwap[0m. | |
[ 4.720016] systemd[1]: Listening on RPCbind Server Activation Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
[ 4.757541] systemd[1]: Reached target RPC Port Mapper. | |
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
[ 4.801383] systemd[1]: Listening on Syslog Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mSyslog Socket[0m. | |
[ 4.838958] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
[ 4.909556] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
[ 4.919434] systemd[1]: Listening on Journal Socket (/dev/log). | |
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
[ 4.961698] systemd[1]: Listening on Journal Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
[ 4.998983] systemd[1]: Listening on Network Service Netlink Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
[ 5.040049] systemd[1]: Listening on udev Control Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
[ 5.079201] systemd[1]: Listening on udev Kernel Socket. | |
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
[ 5.118421] systemd[1]: Condition check resulted in Huge Pages File System being skipped. | |
[ 5.136908] systemd[1]: Mounting POSIX Message Queue File System... | |
Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
[ 5.196028] systemd[1]: Mounting Kernel Debug File System... | |
Mounting [0;1;39mKernel Debug File System[0m... | |
[ 5.263418] systemd[1]: Mounting Temporary Directory (/tmp)... | |
Mounting [0;1;39mTemporary Directory (/tmp)[0m... | |
[ 5.324059] systemd[1]: Starting Create list of static device nodes for the current kernel... | |
Starting [0;1;39mCreate list of st…odes for the current kernel[0m... | |
[ 5.394058] systemd[1]: Starting Start psplash boot splash screen... | |
Starting [0;1;39mStart psplash boot splash screen[0m... | |
[ 5.445819] systemd[1]: Starting RPC Bind... | |
Starting [0;1;39mRPC Bind[0m... | |
[ 5.477929] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. | |
[ 5.522110] systemd[1]: Starting Journal Service... | |
Starting [0;1;39mJournal Service[0m... | |
[ 5.570369] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. | |
[ 5.588175] systemd[1]: Condition check resulted in FUSE Control File System being skipped. | |
[ 5.620876] systemd[1]: Mounting Kernel Configuration File System... | |
Mounting [0;1;39mKernel Configuration File System[0m... | |
[ 5.683432] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
[ 5.753572] systemd[1]: Starting Apply Kernel Variables... | |
[ 5.802248] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
Starting [0;1;39mApply Kernel Variables[0m... | |
[ 5.863642] systemd[1]: Starting udev Coldplug all Devices... | |
Starting [0;1;39mudev Coldplug all Devices[0m... | |
[ 5.939877] systemd[1]: Started Start psplash boot splash screen. | |
[[0;32m OK [0m] Started [0;1;39mStart psplash boot splash screen[0m. | |
[ 6.008239] systemd[1]: Started RPC Bind. | |
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
[ 6.028926] systemd[1]: Mounted POSIX Message Queue File System. | |
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
[ 6.058557] systemd[1]: Mounted Kernel Debug File System. | |
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
[ 6.098480] systemd[1]: Started Journal Service. | |
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory (/tmp)[0m. | |
[[0;32m OK [0m] Started [0;1;39mCreate list of sta… nodes for the current kernel[0m. | |
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
[[0;32m OK [0m] Started [0;1;39mRemount Root and Kernel File Systems[0m. | |
[[0;32m OK [0m] Started [0;1;39mApply Kernel Variables[0m. | |
[[0;32m OK [0m] Started [0;1;39mStart psplash-syst…progress communication helper[0m. | |
Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
[ 6.437952] systemd-journald[87]: Received client request to flush runtime journal. | |
[[0;32m OK [0m] Started [0;1;39mFlush Journal to Persistent Storage[0m. | |
[[0;32m OK [0m] Started [0;1;39mCreate Static Device Nodes in /dev[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. | |
Mounting [0;1;39m/var/volatile[0m... | |
Starting [0;1;39mudev Kernel Device Manager[0m... | |
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
Starting [0;1;39mLoad/Save Random Seed[0m... | |
[[0;32m OK [0m] Started [0;1;39mudev Kernel Device Manager[0m. | |
[[0;32m OK [0m] Started [0;1;39mLoad/Save Random Seed[0m. | |
Starting [0;1;39mNetwork Service[0m... | |
[[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. | |
[[0;32m OK [0m] Created slice [0;1;39msystem-systemd\x2dbacklight.slice[0m. | |
Starting [0;1;39mLoad/Save Screen …ness of backlight:backlight[0m... | |
[ 8.814867] at24 0-0050: supply vcc not found, using dummy regulator | |
[ 8.837336] remoteproc remoteproc0: wkup_m3 is available | |
[ 8.882176] omap_rtc 44e3e000.rtc: already running | |
[ 8.917855] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ 8.938013] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ 8.945299] at24 2-0054: supply vcc not found, using dummy regulator | |
[ 8.994776] omap_rtc 44e3e000.rtc: registered as rtc0 | |
[ 9.043732] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:22:02 UTC (946686122) | |
[ 9.078096] remoteproc remoteproc0: powering up wkup_m3 | |
[[0;32m OK [0m] Started [0;1;39mLoad/Save Screen B…htness of backlight:backlight[0m. | |
[ 9.129511] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 | |
[ 9.139820] at24 2-0055: supply vcc not found, using dummy regulator | |
[ 9.202831] at24 2-0056: supply vcc not found, using dummy regulator | |
[ 9.239661] remoteproc remoteproc0: request_firmware failed: -2 | |
[ 9.245639] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed | |
[ 9.322558] at24 2-0057: supply vcc not found, using dummy regulator | |
[ 9.391685] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ 9.478024] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator | |
[ 9.486725] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests | |
[[0;32m OK [0m] Started [0;1;39mudev Coldplug all Devices[0m. | |
[ 9.570823] usbcore: registered new interface driver usbfs | |
[ 9.576415] usbcore: registered new interface driver hub | |
Starting [0;1;39mudev Wait for Complete Device Initialization[0m... | |
[ 9.743560] usbcore: registered new device driver usb | |
[ 9.774645] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator | |
[ 9.887899] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests | |
[ 10.031314] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
[ 10.036709] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
[ 10.154900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
[ 10.267233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 10.274514] usb usb1: Product: MUSB HDRC host driver | |
[ 10.347420] usb usb1: Manufacturer: Linux 5.10.145-g9b11aaf2cd musb-hcd | |
[ 10.354123] usb usb1: SerialNumber: musb-hdrc.1 | |
[ 10.485979] hub 1-0:1.0: USB hub found | |
[ 10.552284] hub 1-0:1.0: 1 port detected | |
[ 10.889154] PM: Cannot get wkup_m3_ipc handle | |
[ 10.966345] PM: Cannot get wkup_m3_ipc handle | |
[ 11.007713] pvrsrvkm: loading out-of-tree module taints kernel. | |
[ 11.032399] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
[ 11.042877] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
[ 11.137318] omap-aes 53500000.aes: will run requests pump with realtime priority | |
[ 11.145085] omap-sham 53100000.sham: will run requests pump with realtime priority | |
[ 11.243931] PM: Cannot get wkup_m3_ipc handle | |
[ 11.287954] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1 | |
[ 11.303608] PM: Cannot get wkup_m3_ipc handle | |
[ 11.324072] PM: Cannot get wkup_m3_ipc handle | |
[ 11.344697] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) | |
[ 11.498907] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
[[0;32m OK [0m] Found device [0;1;39m/dev/disk/by-uuid/7F3B-137B[0m. | |
[ 14.102514] PM: Cannot get wkup_m3_ipc handle | |
[ 14.112548] remoteproc remoteproc1: 4a334000.pru is available | |
[ 14.126809] PM: Cannot get wkup_m3_ipc handle | |
[ 14.186753] remoteproc remoteproc2: 4a338000.pru is available | |
[ 14.218173] PM: Cannot get wkup_m3_ipc handle | |
[ 14.224692] PM: Cannot get wkup_m3_ipc handle | |
[[0;32m OK [0m] Started [0;1;39mudev Wait for Complete Device Initialization[0m. | |
[[0;32m OK [0m] Created slice [0;1;39msystem-weston.slice[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m. | |
[[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch[0m. | |
Mounting [0;1;39m/boot[0m... | |
[ 16.418039] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
[[0;32m OK [0m] Started [0;1;39mHardware RNG Entropy Gatherer Daemon[0m. | |
[[0;32m OK [0m] Mounted [0;1;39m/boot[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
[[0;32m OK [0m] Started [0;1;39mCreate Volatile Files and Directories[0m. | |
Starting [0;1;39mNetwork Name Resolution[0m... | |
Starting [0;1;39mNetwork Time Synchronization[0m... | |
Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... | |
[[0;32m OK [0m] Started [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. | |
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. | |
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mBoot Completion Check[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mTimers[0m. | |
[[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
Starting [0;1;39msshd.socket[0m. | |
[[0;32m OK [0m] Listening on [0;1;39msshd.socket[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mSockets[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
[[0;32m OK [0m] Started [0;1;39mKernel Logging Service[0m. | |
[[0;32m OK [0m] Started [0;1;39mSystem Logging Service[0m. | |
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
Starting [0;1;39mTelephony service[0m... | |
[[0;32m OK [0m] Started [0;1;39m"Power VR Startup"[0m. | |
Starting [0;1;39mRAUC Good-marking Service[0m... | |
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS0[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
Starting [0;1;39mLogin Service[0m... | |
[ 18.857726] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] | |
[[0;32m OK [0m] Started [0;1;39mWeston Wayland Compositor[0m. | |
[ 19.136776] Bluetooth: Core ver 2.22 | |
[ 19.250144] NET: Registered protocol family 31 | |
[ 19.250159] Bluetooth: HCI device and connection manager initialized | |
[ 19.250187] Bluetooth: HCI socket layer initialized | |
[ 19.250196] Bluetooth: L2CAP socket layer initialized | |
[ 19.250238] Bluetooth: SCO socket layer initialized | |
[[0;32m OK [0m] Started [0;1;39mTelephony service[0m. | |
[[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
Starting [0;1;39mRAUC Update Service[0m... | |
[[0;32m OK [0m] Started [0;1;39mRAUC Update Service[0m. | |
[[0;32m OK [0m] Started [0;1;39mLogin Service[0m. | |
[ 20.891841] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) | |
[[0;32m OK [0m] Started [0;1;39mRAUC Good-marking Service[0m. | |
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... | |
[[0;32m OK [0m] Started [0;1;39mUpdate UTMP about System Runlevel Changes[0m. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 5.10.145-g9b11aaf2cd (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 9.5.0, GNU ld (GNU Binutils) 2.34.0.20200910) #1 PREEMPT Mon Dec 19 21:56:12 UTC 2022 | |
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green | |
[ 0.000000] Memory policy: Data cache writeback | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] cma: Failed to reserve 512 MiB | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] HighMem empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] | |
[ 0.000000] On node 0 totalpages: 130560 | |
[ 0.000000] Normal zone: 1148 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31 | |
[ 0.000000] CPU: All CPU(s) started in SVC mode. | |
[ 0.000000] AM335X ES2.1 (sgx neon) | |
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
[ 0.000000] pcpu-alloc: [0] 0 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
[ 0.000000] Kernel command line: rootfstype=ext4 console=ttyS0,115200n8 rootwait rw video=480x272 splash root=/dev/mmcblk1p2 rauc.slot=A | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 500348K/522240K available (10240K kernel code, 757K rwdata, 3508K rodata, 1024K init, 415K bss, 21892K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU event tracing is enabled. | |
[ 0.000000] Trampoline variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 | |
[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ 0.000030] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ 0.000410] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 | |
[ 0.001755] Console: colour dummy device 80x30 | |
[ 0.001837] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) | |
[ 0.090487] pid_max: default: 32768 minimum: 301 | |
[ 0.090661] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.090676] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.091531] CPU: Testing write buffer coherency: ok | |
[ 0.091606] CPU0: Spectre v2: using BPIALL workaround | |
[ 0.092570] Setting up static identity map for 0x80100000 - 0x80100060 | |
[ 0.092735] rcu: Hierarchical SRCU implementation. | |
[ 0.092838] EFI services will not be available. | |
[ 0.093246] devtmpfs: initialized | |
[ 0.104764] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
[ 0.132951] DMA-API: preallocated 65536 debug entries | |
[ 0.132983] DMA-API: debugging enabled by kernel config | |
[ 0.133009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.133034] futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
[ 0.133247] pinctrl core: initialized pinctrl subsystem | |
[ 0.134164] DMI not present or invalid. | |
[ 0.134894] NET: Registered protocol family 16 | |
[ 0.135608] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
[ 0.153603] l3-aon-clkctrl:0000:0: failed to disable | |
[ 0.154772] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.154784] thermal_sys: Registered thermal governor 'bang_bang' | |
[ 0.154799] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.154807] thermal_sys: Registered thermal governor 'user_space' | |
[ 0.155435] cpuidle: using governor ladder | |
[ 0.155484] cpuidle: using governor menu | |
[ 1.225664] No ATAGs? | |
[ 1.225695] hw-breakpoint: debug architecture 0x4 unsupported. | |
[ 1.250726] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) | |
[ 1.250743] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup | |
[ 1.250779] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' | |
[ 1.250796] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' | |
[ 1.250807] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup | |
[ 1.250815] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found | |
[ 1.251856] iommu: Default domain type: Translated | |
[ 1.254048] SCSI subsystem initialized | |
[ 1.254534] mc: Linux media interface: v0.10 | |
[ 1.254576] videodev: Linux video capture interface: v2.00 | |
[ 1.254678] pps_core: LinuxPPS API ver. 1 registered | |
[ 1.254688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 1.254710] PTP clock support registered | |
[ 1.255669] Advanced Linux Sound Architecture Driver Initialized. | |
[ 1.257067] clocksource: Switched to clocksource dmtimer | |
[ 1.264684] NET: Registered protocol family 2 | |
[ 1.264977] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 1.266070] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
[ 1.266134] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.266176] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.266216] TCP: Hash tables configured (established 4096 bind 4096) | |
[ 1.266331] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.266353] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.266492] NET: Registered protocol family 1 | |
[ 1.267320] RPC: Registered named UNIX socket transport module. | |
[ 1.267340] RPC: Registered udp transport module. | |
[ 1.267348] RPC: Registered tcp transport module. | |
[ 1.267355] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 1.267374] PCI: CLS 0 bytes, default 64 | |
[ 1.268370] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
[ 1.269604] Initialise system trusted keyrings | |
[ 1.270037] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
[ 1.273667] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 1.274518] NFS: Registering the id_resolver key type | |
[ 1.274583] Key type id_resolver registered | |
[ 1.274593] Key type id_legacy registered | |
[ 1.274682] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 1.274696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 1.274734] ntfs: driver 2.1.32 [Flags: R/O]. | |
[ 1.275372] Key type asymmetric registered | |
[ 1.275393] Asymmetric key parser 'x509' registered | |
[ 1.275443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
[ 1.275456] io scheduler mq-deadline registered | |
[ 1.275464] io scheduler kyber registered | |
[ 1.533361] ti-sysc: probe of 44e31000.target-module failed with error -16 | |
[ 1.579944] ti-sysc: probe of 48040000.target-module failed with error -16 | |
[ 1.667650] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
[ 1.788685] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
[ 1.788735] edma 49000000.dma: TI EDMA DMA engine driver | |
[ 1.807569] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
[ 1.812021] pwm-backlight backlight: GPIO lookup for consumer enable | |
[ 1.812041] pwm-backlight backlight: using device tree for GPIO lookup | |
[ 1.812075] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' | |
[ 1.812092] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' | |
[ 1.812105] pwm-backlight backlight: using lookup tables for GPIO lookup | |
[ 1.812114] pwm-backlight backlight: No GPIO consumer enable found | |
[ 1.812139] pwm-backlight backlight: supply power not found, using dummy regulator | |
[ 1.860313] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled | |
[ 1.864677] printk: console [ttyS0] disabled | |
[ 1.864731] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term | |
[ 1.864739] omap8250 44e09000.serial: using device tree for GPIO lookup | |
[ 1.864776] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
[ 1.864800] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
[ 1.864814] omap8250 44e09000.serial: using lookup tables for GPIO lookup | |
[ 1.864823] omap8250 44e09000.serial: No GPIO consumer rs485-term found | |
[ 1.864869] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 | |
[ 2.535100] printk: console [ttyS0] enabled | |
[ 2.541101] omap8250 48024000.serial: GPIO lookup for consumer rs485-term | |
[ 2.541119] omap8250 48024000.serial: using device tree for GPIO lookup | |
[ 2.541156] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@24000/serial@0[0]' | |
[ 2.541179] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@24000/serial@0[0]' | |
[ 2.541193] omap8250 48024000.serial: using lookup tables for GPIO lookup | |
[ 2.541201] omap8250 48024000.serial: No GPIO consumer rs485-term found | |
[ 2.541244] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 26, base_baud = 3000000) is a 8250 | |
[ 2.553160] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
[ 2.559692] random: crng init done | |
[ 2.565157] tilcdc-panel panel: GPIO lookup for consumer enable | |
[ 2.565175] tilcdc-panel panel: using device tree for GPIO lookup | |
[ 2.565208] tilcdc-panel panel: No GPIO consumer enable found | |
[ 2.565217] tilcdc-panel panel: failed to request enable GPIO | |
[ 2.571724] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 2.582301] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 2.592811] tilcdc 4830e000.lcdc: no encoders/connectors found | |
[ 2.623320] brd: module loaded | |
[ 2.633246] loop: module loaded | |
[ 2.641360] mdio_bus fixed-0: GPIO lookup for consumer reset | |
[ 2.641380] mdio_bus fixed-0: using lookup tables for GPIO lookup | |
[ 2.641388] mdio_bus fixed-0: No GPIO consumer reset found | |
[ 2.646371] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset | |
[ 2.646392] mdio_bus 4a101000.mdio: using device tree for GPIO lookup | |
[ 2.646425] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
[ 2.646449] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
[ 2.646462] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup | |
[ 2.646470] mdio_bus 4a101000.mdio: No GPIO consumer reset found | |
[ 2.697093] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
[ 2.705997] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset | |
[ 2.706013] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup | |
[ 2.706055] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
[ 2.706081] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
[ 2.706092] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup | |
[ 2.706101] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found | |
[ 2.707221] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
[ 2.716831] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
[ 2.723319] cpsw 4a100000.ethernet: ALE Table size 1024 | |
[ 2.728729] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) | |
[ 2.735973] cpsw 4a100000.ethernet: Detected MACID = b0:d5:cc:fb:60:3d | |
[ 2.744901] i2c /dev entries driver | |
[ 2.751278] cpuidle: enable-method property 'ti,am3352' found operations | |
[ 2.758828] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.765041] sdhci: Copyright(c) Pierre Ossman | |
[ 2.770542] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 2.777811] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd | |
[ 2.777828] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
[ 2.777855] sdhci-omap 48060000.mmc: No GPIO consumer cd found | |
[ 2.778420] sdhci-omap 481d8000.mmc: GPIO lookup for consumer cd | |
[ 2.778434] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
[ 2.778471] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
[ 2.778492] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
[ 2.778503] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
[ 2.778512] sdhci-omap 481d8000.mmc: No GPIO consumer cd found | |
[ 2.778520] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp | |
[ 2.778526] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
[ 2.778548] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
[ 2.778567] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
[ 2.778576] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
[ 2.778583] sdhci-omap 481d8000.mmc: No GPIO consumer wp found | |
[ 2.778743] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
[ 2.787890] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 2.811140] NET: Registered protocol family 10 | |
[ 2.827735] Segment Routing with IPv6 | |
[ 2.831513] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 2.840621] NET: Registered protocol family 17 | |
[ 2.845471] Key type dns_resolver registered | |
[ 2.867802] omap_voltage_late_init: Voltage driver support not added | |
[ 2.874850] Loading compiled-in X.509 certificates | |
[ 2.899944] gpio gpiochip0: (gpio-0-31): created GPIO range 0->7 ==> 44e10800.pinmux PIN 82->89 | |
[ 2.899972] gpio gpiochip0: (gpio-0-31): created GPIO range 8->11 ==> 44e10800.pinmux PIN 52->55 | |
[ 2.899984] gpio gpiochip0: (gpio-0-31): created GPIO range 12->15 ==> 44e10800.pinmux PIN 94->97 | |
[ 2.899996] gpio gpiochip0: (gpio-0-31): created GPIO range 16->17 ==> 44e10800.pinmux PIN 71->72 | |
[ 2.900008] gpio gpiochip0: (gpio-0-31): created GPIO range 18->18 ==> 44e10800.pinmux PIN 135->135 | |
[ 2.900019] gpio gpiochip0: (gpio-0-31): created GPIO range 19->20 ==> 44e10800.pinmux PIN 108->109 | |
[ 2.900031] gpio gpiochip0: (gpio-0-31): created GPIO range 21->21 ==> 44e10800.pinmux PIN 73->73 | |
[ 2.900043] gpio gpiochip0: (gpio-0-31): created GPIO range 22->23 ==> 44e10800.pinmux PIN 8->9 | |
[ 2.900055] gpio gpiochip0: (gpio-0-31): created GPIO range 26->27 ==> 44e10800.pinmux PIN 10->11 | |
[ 2.900067] gpio gpiochip0: (gpio-0-31): created GPIO range 28->28 ==> 44e10800.pinmux PIN 74->74 | |
[ 2.900080] gpio gpiochip0: (gpio-0-31): created GPIO range 29->29 ==> 44e10800.pinmux PIN 81->81 | |
[ 2.900092] gpio gpiochip0: (gpio-0-31): created GPIO range 30->31 ==> 44e10800.pinmux PIN 28->29 | |
[ 2.900426] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) | |
[ 2.900530] gpio gpiochip0: registered GPIOs 0 to 31 on gpio-0-31 | |
[ 2.900585] OMAP GPIO hardware version 0.1 | |
[ 2.905806] i2c i2c-0: GPIO lookup for consumer scl | |
[ 2.905821] i2c i2c-0: using device tree for GPIO lookup | |
[ 2.905855] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
[ 2.905877] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
[ 2.905891] i2c i2c-0: using lookup tables for GPIO lookup | |
[ 2.905899] i2c i2c-0: No GPIO consumer scl found | |
[ 2.905919] i2c i2c-0: GPIO lookup for consumer sda | |
[ 2.905925] i2c i2c-0: using device tree for GPIO lookup | |
[ 2.905946] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
[ 2.905967] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
[ 2.905976] i2c i2c-0: using lookup tables for GPIO lookup | |
[ 2.905982] i2c i2c-0: No GPIO consumer sda found | |
[ 2.923813] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA | |
[ 2.937626] tps65217-pmic: Failed to locate of_node [id: -1] | |
[ 2.950121] tps65217-bl: Failed to locate of_node [id: -1] | |
[ 2.958686] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
[ 2.964579] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
[ 2.971730] i2c i2c-1: GPIO lookup for consumer scl | |
[ 2.971750] i2c i2c-1: using device tree for GPIO lookup | |
[ 2.971786] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0[0]' | |
[ 2.971810] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0[0]' | |
[ 2.971823] i2c i2c-1: using lookup tables for GPIO lookup | |
[ 2.971832] i2c i2c-1: No GPIO consumer scl found | |
[ 2.971851] i2c i2c-1: GPIO lookup for consumer sda | |
[ 2.971904] i2c i2c-1: using device tree for GPIO lookup | |
[ 2.971932] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0[0]' | |
[ 2.971953] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0[0]' | |
[ 2.971963] i2c i2c-1: using lookup tables for GPIO lookup | |
[ 2.971970] i2c i2c-1: No GPIO consumer sda found | |
[ 2.972530] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
[ 2.978744] gpio gpiochip1: (gpio-32-63): created GPIO range 0->7 ==> 44e10800.pinmux PIN 0->7 | |
[ 2.978762] gpio gpiochip1: (gpio-32-63): created GPIO range 8->11 ==> 44e10800.pinmux PIN 90->93 | |
[ 2.978774] gpio gpiochip1: (gpio-32-63): created GPIO range 12->27 ==> 44e10800.pinmux PIN 12->27 | |
[ 2.978785] gpio gpiochip1: (gpio-32-63): created GPIO range 28->31 ==> 44e10800.pinmux PIN 30->33 | |
[ 2.979080] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) | |
[ 2.979176] gpio gpiochip1: registered GPIOs 32 to 63 on gpio-32-63 | |
[ 2.980392] i2c i2c-2: GPIO lookup for consumer scl | |
[ 2.980409] i2c i2c-2: using device tree for GPIO lookup | |
[ 2.980444] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
[ 2.980466] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
[ 2.980479] i2c i2c-2: using lookup tables for GPIO lookup | |
[ 2.980488] i2c i2c-2: No GPIO consumer scl found | |
[ 2.980507] i2c i2c-2: GPIO lookup for consumer sda | |
[ 2.980513] i2c i2c-2: using device tree for GPIO lookup | |
[ 2.980535] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
[ 2.980554] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
[ 2.980563] i2c i2c-2: using lookup tables for GPIO lookup | |
[ 2.980569] i2c i2c-2: No GPIO consumer sda found | |
[ 2.981478] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
[ 2.987783] gpio gpiochip2: (gpio-64-95): created GPIO range 0->17 ==> 44e10800.pinmux PIN 34->51 | |
[ 2.987802] gpio gpiochip2: (gpio-64-95): created GPIO range 18->21 ==> 44e10800.pinmux PIN 77->80 | |
[ 2.987814] gpio gpiochip2: (gpio-64-95): created GPIO range 22->31 ==> 44e10800.pinmux PIN 56->65 | |
[ 2.988141] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) | |
[ 2.988237] gpio gpiochip2: registered GPIOs 64 to 95 on gpio-64-95 | |
[ 2.988664] gpio gpiochip3: (gpio-96-127): created GPIO range 0->4 ==> 44e10800.pinmux PIN 66->70 | |
[ 2.988681] gpio gpiochip3: (gpio-96-127): created GPIO range 5->6 ==> 44e10800.pinmux PIN 98->99 | |
[ 2.988693] gpio gpiochip3: (gpio-96-127): created GPIO range 7->8 ==> 44e10800.pinmux PIN 75->76 | |
[ 2.988705] gpio gpiochip3: (gpio-96-127): created GPIO range 13->13 ==> 44e10800.pinmux PIN 141->141 | |
[ 2.988716] gpio gpiochip3: (gpio-96-127): created GPIO range 14->21 ==> 44e10800.pinmux PIN 100->107 | |
[ 2.988938] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) | |
[ 2.989070] gpio gpiochip3: registered GPIOs 96 to 127 on gpio-96-127 | |
[ 2.992651] tilcdc-panel panel: GPIO lookup for consumer enable | |
[ 2.992672] tilcdc-panel panel: using device tree for GPIO lookup | |
[ 2.992720] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/panel[0]' - status (0) | |
[ 2.992744] gpio gpiochip3: Persistence not supported for GPIO 19 | |
[ 2.992761] tilcdc-panel panel: found enable GPIO | |
[ 2.998132] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 3.008913] OF: graph: no port node found in /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 | |
[ 3.020906] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 | |
[ 3.031147] mmc1: new high speed MMC card at address 0001 | |
[ 3.036504] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB | |
[ 3.036784] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB | |
[ 3.037199] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB | |
[ 3.037422] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB, chardev (243:0) | |
[ 3.039542] mmcblk1: p1 p2 p3 | |
[ 3.074041] Console: switching to colour frame buffer device 60x34 | |
[ 3.130321] tilcdc 4830e000.lcdc: [drm] fb0: tilcdcdrmfb frame buffer device | |
[ 3.140377] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd | |
[ 3.140398] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
[ 3.140462] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' - status (0) | |
[ 3.140541] gpio gpiochip0: Persistence not supported for GPIO 6 | |
[ 3.140561] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
[ 3.150014] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led2[0]' - status (0) | |
[ 3.150089] gpio gpiochip1: Persistence not supported for GPIO 21 | |
[ 3.150098] gpio-53 (?): no flags found for gpios | |
[ 3.150307] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led3[0]' - status (0) | |
[ 3.150323] gpio gpiochip1: Persistence not supported for GPIO 22 | |
[ 3.150329] gpio-54 (?): no flags found for gpios | |
[ 3.150439] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led4[0]' - status (0) | |
[ 3.150452] gpio gpiochip1: Persistence not supported for GPIO 23 | |
[ 3.150459] gpio-55 (?): no flags found for gpios | |
[ 3.150564] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led5[0]' - status (0) | |
[ 3.150577] gpio gpiochip1: Persistence not supported for GPIO 24 | |
[ 3.150583] gpio-56 (?): no flags found for gpios | |
[ 3.152585] ALSA device list: | |
[ 3.155593] No soundcards found. | |
[ 3.159843] sdhci-omap 48060000.mmc: Got CD GPIO | |
[ 3.164534] sdhci-omap 48060000.mmc: GPIO lookup for consumer wp | |
[ 3.164543] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
[ 3.164590] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
[ 3.164613] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
[ 3.164629] sdhci-omap 48060000.mmc: using lookup tables for GPIO lookup | |
[ 3.164638] sdhci-omap 48060000.mmc: No GPIO consumer wp found | |
[ 3.164826] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator | |
[ 3.225352] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA | |
[ 3.272726] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 3.283333] VFS: Mounted root (ext4 filesystem) on device 179:2. | |
[ 3.291916] devtmpfs: mounted | |
[ 3.296463] Freeing unused kernel memory: 1024K | |
[ 3.317597] Run /sbin/init as init process | |
[ 3.321714] with arguments: | |
[ 3.321719] /sbin/init | |
[ 3.321723] splash | |
[ 3.321727] with environment: | |
[ 3.321731] HOME=/ | |
[ 3.321736] TERM=linux | |
[ 3.527283] systemd[1]: System time before build time, advancing clock. | |
[ 3.556007] systemd[1]: systemd 244.5+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) | |
[ 3.578613] systemd[1]: Detected architecture arm. | |
[ 3.628417] systemd[1]: Set hostname to <beaglebone>. | |
[ 4.351045] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. | |
[ 4.363694] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | |
[ 4.376589] systemd[1]: Created slice system-getty.slice. | |
[ 4.420189] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
[ 4.461876] systemd[1]: Created slice User and Session Slice. | |
[ 4.498964] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
[ 4.538661] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ 4.577987] systemd[1]: Reached target Paths. | |
[ 4.590028] systemd[1]: Reached target Remote File Systems. | |
[ 4.627557] systemd[1]: Reached target Slices. | |
[ 4.668002] systemd[1]: Reached target Swap. | |
[ 4.720016] systemd[1]: Listening on RPCbind Server Activation Socket. | |
[ 4.757541] systemd[1]: Reached target RPC Port Mapper. | |
[ 4.801383] systemd[1]: Listening on Syslog Socket. | |
[ 4.838958] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
[ 4.909556] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
[ 4.919434] systemd[1]: Listening on Journal Socket (/dev/log). | |
[ 4.961698] systemd[1]: Listening on Journal Socket. | |
[ 4.998983] systemd[1]: Listening on Network Service Netlink Socket. | |
[ 5.040049] systemd[1]: Listening on udev Control Socket. | |
[ 5.079201] systemd[1]: Listening on udev Kernel Socket. | |
[ 5.118421] systemd[1]: Condition check resulted in Huge Pages File System being skipped. | |
[ 5.136908] systemd[1]: Mounting POSIX Message Queue File System... | |
[ 5.196028] systemd[1]: Mounting Kernel Debug File System... | |
[ 5.263418] systemd[1]: Mounting Temporary Directory (/tmp)... | |
[ 5.324059] systemd[1]: Starting Create list of static device nodes for the current kernel... | |
[ 5.394058] systemd[1]: Starting Start psplash boot splash screen... | |
[ 5.445819] systemd[1]: Starting RPC Bind... | |
[ 5.477929] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. | |
[ 5.522110] systemd[1]: Starting Journal Service... | |
[ 5.570369] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. | |
[ 5.588175] systemd[1]: Condition check resulted in FUSE Control File System being skipped. | |
[ 5.620876] systemd[1]: Mounting Kernel Configuration File System... | |
[ 5.683432] systemd[1]: Starting Remount Root and Kernel File Systems... | |
[ 5.753572] systemd[1]: Starting Apply Kernel Variables... | |
[ 5.802248] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
[ 5.863642] systemd[1]: Starting udev Coldplug all Devices... | |
[ 5.939877] systemd[1]: Started Start psplash boot splash screen. | |
[ 6.008239] systemd[1]: Started RPC Bind. | |
[ 6.028926] systemd[1]: Mounted POSIX Message Queue File System. | |
[ 6.058557] systemd[1]: Mounted Kernel Debug File System. | |
[ 6.098480] systemd[1]: Started Journal Service. | |
[ 6.437952] systemd-journald[87]: Received client request to flush runtime journal. | |
[ 8.814867] at24 0-0050: supply vcc not found, using dummy regulator | |
[ 8.837336] remoteproc remoteproc0: wkup_m3 is available | |
[ 8.882176] omap_rtc 44e3e000.rtc: already running | |
[ 8.917855] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ 8.937480] at24 0-0050: GPIO lookup for consumer wp | |
[ 8.937498] at24 0-0050: using device tree for GPIO lookup | |
[ 8.937548] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
[ 8.937572] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
[ 8.937587] at24 0-0050: using lookup tables for GPIO lookup | |
[ 8.937595] at24 0-0050: No GPIO consumer wp found | |
[ 8.938013] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ 8.945299] at24 2-0054: supply vcc not found, using dummy regulator | |
[ 8.994742] omap_rtc 44e3e000.rtc: char device (252:0) | |
[ 8.994776] omap_rtc 44e3e000.rtc: registered as rtc0 | |
[ 9.043732] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:22:02 UTC (946686122) | |
[ 9.078096] remoteproc remoteproc0: powering up wkup_m3 | |
[ 9.098339] at24 2-0054: GPIO lookup for consumer wp | |
[ 9.098358] at24 2-0054: using device tree for GPIO lookup | |
[ 9.098413] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
[ 9.098441] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
[ 9.098457] at24 2-0054: using lookup tables for GPIO lookup | |
[ 9.098465] at24 2-0054: No GPIO consumer wp found | |
[ 9.129511] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 | |
[ 9.139820] at24 2-0055: supply vcc not found, using dummy regulator | |
[ 9.146480] at24 2-0055: GPIO lookup for consumer wp | |
[ 9.146490] at24 2-0055: using device tree for GPIO lookup | |
[ 9.146534] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
[ 9.146597] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
[ 9.146612] at24 2-0055: using lookup tables for GPIO lookup | |
[ 9.146620] at24 2-0055: No GPIO consumer wp found | |
[ 9.155798] omap_rtc 44e3e000.rtc: GPIO lookup for consumer wp | |
[ 9.155819] omap_rtc 44e3e000.rtc: using device tree for GPIO lookup | |
[ 9.155889] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
[ 9.155914] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
[ 9.155930] omap_rtc 44e3e000.rtc: using lookup tables for GPIO lookup | |
[ 9.155939] omap_rtc 44e3e000.rtc: No GPIO consumer wp found | |
[ 9.202831] at24 2-0056: supply vcc not found, using dummy regulator | |
[ 9.239661] remoteproc remoteproc0: request_firmware failed: -2 | |
[ 9.245639] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed | |
[ 9.290175] at24 2-0056: GPIO lookup for consumer wp | |
[ 9.290196] at24 2-0056: using device tree for GPIO lookup | |
[ 9.290242] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
[ 9.290267] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
[ 9.290282] at24 2-0056: using lookup tables for GPIO lookup | |
[ 9.290290] at24 2-0056: No GPIO consumer wp found | |
[ 9.322558] at24 2-0057: supply vcc not found, using dummy regulator | |
[ 9.390151] at24 2-0057: GPIO lookup for consumer wp | |
[ 9.390173] at24 2-0057: using device tree for GPIO lookup | |
[ 9.390224] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
[ 9.390249] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
[ 9.390264] at24 2-0057: using lookup tables for GPIO lookup | |
[ 9.390273] at24 2-0057: No GPIO consumer wp found | |
[ 9.391685] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ 9.477708] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset | |
[ 9.477733] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
[ 9.477782] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 9.477804] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 9.477818] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
[ 9.477828] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found | |
[ 9.477836] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect | |
[ 9.477843] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
[ 9.477862] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 9.477879] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 9.477888] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
[ 9.477895] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found | |
[ 9.478024] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator | |
[ 9.486725] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests | |
[ 9.570823] usbcore: registered new interface driver usbfs | |
[ 9.576415] usbcore: registered new interface driver hub | |
[ 9.743560] usbcore: registered new device driver usb | |
[ 9.774342] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset | |
[ 9.774365] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
[ 9.774411] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 9.774432] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 9.774446] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
[ 9.774455] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found | |
[ 9.774464] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect | |
[ 9.774470] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
[ 9.774489] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 9.774507] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 9.774516] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
[ 9.774523] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found | |
[ 9.774645] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator | |
[ 9.887899] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests | |
[ 10.031314] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
[ 10.036709] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
[ 10.154900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
[ 10.267233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 10.274514] usb usb1: Product: MUSB HDRC host driver | |
[ 10.347420] usb usb1: Manufacturer: Linux 5.10.145-g9b11aaf2cd musb-hcd | |
[ 10.354123] usb usb1: SerialNumber: musb-hdrc.1 | |
[ 10.485979] hub 1-0:1.0: USB hub found | |
[ 10.552284] hub 1-0:1.0: 1 port detected | |
[ 10.889154] PM: Cannot get wkup_m3_ipc handle | |
[ 10.966345] PM: Cannot get wkup_m3_ipc handle | |
[ 11.007713] pvrsrvkm: loading out-of-tree module taints kernel. | |
[ 11.032399] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
[ 11.042877] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
[ 11.137318] omap-aes 53500000.aes: will run requests pump with realtime priority | |
[ 11.145085] omap-sham 53100000.sham: will run requests pump with realtime priority | |
[ 11.243931] PM: Cannot get wkup_m3_ipc handle | |
[ 11.287954] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1 | |
[ 11.303608] PM: Cannot get wkup_m3_ipc handle | |
[ 11.324072] PM: Cannot get wkup_m3_ipc handle | |
[ 11.344697] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) | |
[ 11.498907] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
[ 14.102514] PM: Cannot get wkup_m3_ipc handle | |
[ 14.112548] remoteproc remoteproc1: 4a334000.pru is available | |
[ 14.126809] PM: Cannot get wkup_m3_ipc handle | |
[ 14.186753] remoteproc remoteproc2: 4a338000.pru is available | |
[ 14.218173] PM: Cannot get wkup_m3_ipc handle | |
[ 14.224692] PM: Cannot get wkup_m3_ipc handle | |
[ 16.418039] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
[ 18.857726] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] | |
[ 19.136776] Bluetooth: Core ver 2.22 | |
[ 19.250144] NET: Registered protocol family 31 | |
[ 19.250159] Bluetooth: HCI device and connection manager initialized | |
[ 19.250187] Bluetooth: HCI socket layer initialized | |
[ 19.250196] Bluetooth: L2CAP socket layer initialized | |
[ 19.250238] Bluetooth: SCO socket layer initialized | |
[ 20.891841] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Date: 2020-09-20 UTC | |
[10:44:00.253] weston 8.0.0 | |
https://wayland.freedesktop.org | |
Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/ | |
Build: 8.0.0 | |
[10:44:00.253] Command line: /usr/bin/weston --log=/var/log/weston.log | |
[10:44:00.253] OS: Linux, 5.10.145-g9b11aaf2cd, #1 PREEMPT Mon Dec 19 21:56:12 UTC 2022, armv7l | |
[10:44:00.298] Using config file '/etc/xdg/weston/weston.ini' | |
[10:44:00.299] Output repaint window is 7 ms maximum. | |
[10:44:00.301] Loading module '/usr/lib/libweston-8/drm-backend.so' | |
[10:44:00.354] initializing drm backend | |
[10:44:00.355] logind: not running in a systemd session | |
[10:44:00.355] logind: cannot setup systemd-logind helper (-61), using legacy fallback | |
[10:44:00.410] using /dev/dri/card0 | |
[10:44:00.411] DRM: supports universal planes | |
[10:44:00.411] DRM: supports atomic modesetting | |
[10:44:00.411] DRM: supports picture aspect ratio | |
[10:44:00.456] Loading module '/usr/lib/libweston-8/gl-renderer.so' | |
[10:44:00.902] EGL client extensions: EGL_EXT_client_extensions | |
EGL_EXT_device_base EGL_EXT_device_enumeration | |
EGL_EXT_device_query EGL_EXT_platform_base | |
EGL_KHR_client_get_all_proc_addresses EGL_KHR_debug | |
EGL_EXT_platform_wayland EGL_MESA_platform_gbm | |
EGL_MESA_platform_surfaceless | |
[10:44:00.937] EGL version: 1.5 | |
[10:44:00.937] EGL vendor: Mesa Project | |
[10:44:00.937] EGL client APIs: OpenGL_ES | |
[10:44:00.937] EGL extensions: EGL_EXT_buffer_age | |
EGL_EXT_create_context_robustness EGL_EXT_image_dma_buf_import | |
EGL_IMG_cl_image EGL_KHR_config_attribs EGL_KHR_create_context | |
EGL_KHR_fence_sync EGL_KHR_get_all_proc_addresses | |
EGL_KHR_gl_renderbuffer_image EGL_KHR_gl_texture_2D_image | |
EGL_KHR_gl_texture_cubemap_image EGL_KHR_image | |
EGL_KHR_image_base EGL_KHR_image_pixmap | |
EGL_KHR_no_config_context EGL_KHR_reusable_sync | |
EGL_KHR_surfaceless_context EGL_EXT_pixel_format_float | |
EGL_KHR_wait_sync EGL_MESA_configless_context | |
EGL_MESA_drm_image EGL_WL_bind_wayland_display | |
[10:44:00.937] warning: Disabling render GPU timeline and explicit synchronization due to missing EGL_ANDROID_native_fence_sync extension | |
[10:44:00.937] EGL_KHR_surfaceless_context available | |
[10:44:00.990] GL version: OpenGL ES 2.0 build 1.17@4948957 | |
[10:44:00.991] GLSL version: OpenGL ES GLSL ES 1.00 build 1.17@4948957 | |
[10:44:00.991] GL vendor: Imagination Technologies | |
[10:44:00.991] GL renderer: PowerVR SGX 530 | |
[10:44:00.991] GL extensions: GL_OES_compressed_ETC1_RGB8_texture | |
GL_OES_depth24 GL_OES_depth_texture GL_OES_egl_sync | |
GL_OES_element_index_uint GL_OES_EGL_image | |
GL_OES_EGL_image_external GL_OES_fbo_render_mipmap | |
GL_OES_fragment_precision_high GL_OES_get_program_binary | |
GL_OES_mapbuffer GL_OES_packed_depth_stencil | |
GL_OES_required_internalformat GL_OES_rgb8_rgba8 | |
GL_OES_standard_derivatives GL_OES_surfaceless_context | |
GL_OES_texture_float GL_OES_texture_half_float | |
GL_OES_vertex_array_object GL_OES_vertex_half_float | |
GL_EXT_blend_minmax GL_EXT_discard_framebuffer | |
GL_EXT_multi_draw_arrays GL_EXT_multisampled_render_to_texture | |
GL_EXT_shader_texture_lod GL_EXT_texture_format_BGRA8888 | |
GL_EXT_texture_rg GL_IMG_multisampled_render_to_texture | |
GL_IMG_program_binary GL_IMG_read_format GL_IMG_shader_binary | |
GL_IMG_texture_compression_pvrtc GL_IMG_texture_format_BGRA8888 | |
GL_IMG_texture_npot GL_IMG_uniform_buffer_object GL_KHR_debug | |
GL_EXT_texture_storage | |
[10:44:00.991] GL ES 2 renderer features: | |
read-back format: RGBA | |
wl_shm sub-image to texture: no | |
EGL Wayland extension: yes | |
[10:44:01.213] warning: no input devices found, but none required as per configuration. | |
[10:44:01.214] DRM: head 'LVDS-1' found, connector 34 is connected, EDID make 'unknown', model 'unknown', serial 'unknown' | |
[10:44:01.214] Registered plugin API 'weston_drm_output_api_v1' of size 12 | |
[10:44:01.215] format 0x34325258 not supported by output LVDS-1 | |
[10:44:01.215] Failed to init output gl state | |
[10:44:01.215] Enabling output "LVDS-1" failed. | |
[10:44:01.215] Error: cannot enable output 'LVDS-1' without heads. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
bbb-boot-low-quality.mp4