Created
October 8, 2020 10:20
-
-
Save damex/65d90e7b546f09112457a947f10b5c2c to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Octeon ubnt_e300(ram)# usb start | |
(Re)start USB... | |
USB0: Starting the controller | |
USB XHCI 1.00 | |
scanning bus 0 for devices... cannot reset port 1!? | |
2 USB Device(s) found | |
USB1: Starting the controller | |
USB XHCI 1.00 | |
scanning bus 1 for devices... 1 USB Device(s) found | |
scanning usb for storage devices... 1 Storage Device(s) found | |
Octeon ubnt_e300(ram)# fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter4-initramfs-kernel.bin | |
reading openwrt-octeon-ubnt_edgerouter4-initramfs-kernel.bin | |
18567608 bytes read in 358 ms (49.5 MiB/s) | |
Octeon ubnt_e300(ram)# bootoctlinux 0 numcores=4 endbootargs mem=0 | |
Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x2309660 | |
## Loading big-endian Linux kernel with entry point: 0xffffffff816ee340 ... | |
L2C_TAD0_INT.bigrd is set. | |
This inidicates that a read reference past L2C_BIG_CTL.maxdram | |
has occurred. This can happen during normal operation and may be beneign. | |
bigrd: 1 | |
bigwr: 0 | |
holerd: 0 | |
holewr: 0 | |
XMC command: 0x0 | |
source: 0x8 | |
node: 0 | |
address: 0x696e31f8 | |
Bootloader: Done loading app on coremask: | |
0xf | |
Starting cores: | |
0xf | |
[ 0.000000] Linux version 5.4.69 (vagrant@builder) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14641-582ba9ddc7)) #0 SMP Wed Oct 7 19:23:27 2020 | |
[ 0.000000] Skipping L2 locking due to reduced L2 cache size | |
[ 0.000000] CVMSEG size: 2 cache lines (256 bytes) | |
[ 0.000000] printk: bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 000d9602 (Cavium Octeon III) | |
[ 0.000000] Checking for the multiply/shift bug... no. | |
[ 0.000000] Checking for the daddiu bug... no. | |
[ 0.000000] Kernel sections are not in the memory maps | |
[ 0.000000] Wasting 278528 bytes for tracking 4352 unused pages | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] Using passed Device Tree. | |
[ 0.000000] software IO TLB: mapped [mem 0x0350c000-0x0354c000] (0MB) | |
[ 0.000000] Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes. | |
[ 0.000000] Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes. | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA32 [mem 0x0000000001100000-0x00000000efffffff] | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000001100000-0x0000000003409fff] | |
[ 0.000000] node 0: [mem 0x0000000003500000-0x000000000fcfffff] | |
[ 0.000000] node 0: [mem 0x0000000020000000-0x000000004ebfffff] | |
[ 0.000000] Zeroed struct page in unavailable ranges: 10486 pages | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000001100000-0x000000004ebfffff] | |
[ 0.000000] percpu: Embedded 18 pages/cpu s35872 r8192 d29664 u73728 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 247725 | |
[ 0.000000] Kernel command line: mtdparts=phys_mapped_flash:2048k(boot0)ro,2048k(boot1)ro,64k(eeprom)ro root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait console=ttyS0, | |
115200 | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 952216K/1006632K available (6100K kernel code, 344K rwdata, 1444K rodata, 11300K init, 16677K bss, 54416K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 127 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e000 23 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e200 12 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e400 6 | |
[ 0.000000] CIB interrupt controller probed: 800107000000ec00 15 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e600 4 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e800 11 | |
[ 0.000000] CIB interrupt controller probed: 800107000000e900 11 | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x320/0x578 with crng_init=0 | |
[ 1.366353] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns | |
[ 1.385499] Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=4000000) | |
[ 1.393731] pid_max: default: 32768 minimum: 301 | |
[ 1.398424] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
[ 1.405696] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
[ 1.414103] Checking for the daddi bug... no. | |
[ 1.418866] rcu: Hierarchical SRCU implementation. | |
[ 1.423760] smp: Bringing up secondary CPUs ... | |
[ 1.428412] SMP: Booting CPU01 (CoreId 1)... | |
[ 1.432693] CPU1 revision is: 000d9602 (Cavium Octeon III) | |
[ 1.433060] SMP: Booting CPU02 (CoreId 2)... | |
[ 1.442773] CPU2 revision is: 000d9602 (Cavium Octeon III) | |
[ 1.443122] SMP: Booting CPU03 (CoreId 3)... | |
[ 1.452833] CPU3 revision is: 000d9602 (Cavium Octeon III) | |
[ 1.452934] smp: Brought up 1 node, 4 CPUs | |
[ 1.464860] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 1.474468] futex hash table entries: 1024 (order: 5, 131072 bytes, linear) | |
[ 1.481893] NET: Registered protocol family 16 | |
[ 1.491934] PCIe: Initializing port 0 | |
[ 1.498773] PCIe: BIST2 FAILED for port 0 (0x0000000000000003) | |
[ 1.678929] random: fast init done | |
[ 3.504465] PCIe: Link timeout on port 0, probably the slot is empty | |
[ 3.510811] PCIe: Initializing port 1 | |
[ 3.517781] PCIe: BIST FAILED for port 1 (0xffffffffffffffff) | |
[ 5.530729] PCIe: Link timeout on port 1, probably the slot is empty | |
[ 5.542925] SCSI subsystem initialized | |
[ 5.546729] usbcore: registered new interface driver usbfs | |
[ 5.552104] usbcore: registered new interface driver hub | |
[ 5.557396] usbcore: registered new device driver usb | |
[ 5.562563] PCI host bridge to bus 0000:00 | |
[ 5.566509] pci_bus 0000:00: root bus resource [mem 0x1000000000000] | |
[ 5.572829] pci_bus 0000:00: root bus resource [io 0x0000] | |
[ 5.578383] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] | |
[ 5.585158] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | |
[ 5.593651] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 | |
[ 5.600153] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 | |
[ 5.610463] clocksource: Switched to clocksource OCTEON_CVMCOUNT | |
[ 5.616963] NET: Registered protocol family 2 | |
[ 5.621580] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) | |
[ 5.629801] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 5.637571] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) | |
[ 5.644811] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 5.651119] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 5.657665] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 5.664839] NET: Registered protocol family 1 | |
[ 5.669057] PCI: CLS 0 bytes, default 128 | |
[ 5.725163] platform 1180068000000.uctl: clocks initialized. | |
[ 5.730751] platform 1180069000000.uctl: clocks initialized. | |
[ 5.737185] workingset: timestamp_bits=46 max_order=18 bucket_order=0 | |
[ 5.749085] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 5.754893] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 5.766538] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed. | |
[ 5.774044] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
[ 5.780678] printk: console [ttyS0] disabled | |
[ 5.784831] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 46, base_baud = 25000000) is a OCTEON | |
[ 5.794620] printk: console [ttyS0] enabled | |
[ 5.794620] printk: console [ttyS0] enabled | |
[ 5.802936] printk: bootconsole [early0] disabled | |
[ 5.802936] printk: bootconsole [early0] disabled | |
[ 5.812604] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 47, base_baud = 25000000) is a OCTEON | |
[ 5.822710] octeon_rng octeon_rng: Octeon Random Number Generator | |
[ 5.832447] loop: module loaded | |
[ 5.836160] libphy: mdio_octeon: probed | |
[ 5.859229] mdio_octeon 1180000001800.mdio: Probed | |
[ 5.864170] libphy: mdio_octeon: probed | |
[ 5.868028] mdio_octeon 1180000001900.mdio: Probed | |
[ 5.873020] libphy: Fixed MDIO Bus: probed | |
[ 5.877880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 5.884426] ehci-pci: EHCI PCI platform driver | |
[ 5.888917] ehci-platform: EHCI generic platform driver | |
[ 5.894249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 5.900453] ohci-platform: OHCI generic platform driver | |
[ 5.905816] usbcore: registered new interface driver usb-storage | |
[ 5.911837] octeon_wdt: Initial granularity 5 Sec | |
[ 5.944080] Interface 0 has 4 ports (SGMII) | |
[ 5.948336] Interface 1 has 4 ports (SGMII) | |
[ 5.953362] Interface 3 has 4 ports (LOOP) | |
[ 5.964310] NET: Registered protocol family 10 | |
[ 5.970604] Segment Routing with IPv6 | |
[ 5.974335] NET: Registered protocol family 17 | |
[ 5.978842] 8021q: 802.1Q VLAN Support v1.8 | |
[ 5.983558] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed | |
[ 5.995317] Freeing unused kernel memory: 11300K | |
[ 5.999953] This architecture does not have kernel memory protection. | |
[ 6.006397] Run /init as init process | |
[ 6.015696] init: Console is alive | |
[ 6.019255] init: - watchdog - | |
[ 6.027363] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
[ 6.035305] dwc3 1680000000000.xhci: Configuration mismatch. dr_mode forced to host | |
[ 6.043299] dwc3 1690000000000.xhci: Configuration mismatch. dr_mode forced to host | |
[ 6.054656] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 6.060237] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 6.068005] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x0000000002010010 | |
[ 6.077439] xhci-hcd xhci-hcd.0.auto: irq 44, io mem 0x1680000000000 | |
[ 6.084370] hub 1-0:1.0: USB hub found | |
[ 6.088190] hub 1-0:1.0: 1 port detected | |
[ 6.092383] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 6.097904] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
[ 6.105576] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed | |
[ 6.112209] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 6.120697] hub 2-0:1.0: USB hub found | |
[ 6.124525] hub 2-0:1.0: 1 port detected | |
[ 6.128769] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 6.134298] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 | |
[ 6.142056] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x0000000002010010 | |
[ 6.151493] xhci-hcd xhci-hcd.1.auto: irq 45, io mem 0x1690000000000 | |
[ 6.158435] hub 3-0:1.0: USB hub found | |
[ 6.162247] hub 3-0:1.0: 1 port detected | |
[ 6.166405] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 6.171929] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 | |
[ 6.179599] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
[ 6.186200] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 6.194740] hub 4-0:1.0: USB hub found | |
[ 6.198546] hub 4-0:1.0: 1 port detected | |
[ 6.202922] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
[ 6.214263] init: - preinit - | |
[ 6.318223] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 6.342143] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 6.362053] random: jshn: uninitialized urandom read (4 bytes read) | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
[ 7.186528] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd | |
[ 7.212410] usb-storage 2-1:1.0: USB Mass Storage device detected | |
[ 7.218776] scsi host0: usb-storage 2-1:1.0 | |
[ 8.243140] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 | |
[ 8.252189] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) | |
[ 8.260200] sd 0:0:0:0: [sda] Write Protect is off | |
[ 8.265423] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
[ 8.277976] sda: sda1 | |
[ 8.282010] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
[ 10.454864] procd: - early - | |
[ 10.457799] procd: - watchdog - | |
[ 10.976581] procd: - watchdog - | |
[ 10.979912] procd: - ubus - | |
[ 10.985908] urandom_read: 1 callbacks suppressed | |
[ 10.985914] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 11.032512] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 11.039058] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 11.045840] procd: - init - | |
Please press Enter to activate this console. | |
[ 11.179971] kmodloader: loading kernel modules from /etc/modules.d/* | |
[ 11.189076] urngd: v1.0.2 started. | |
[ 11.197785] xt_time: kernel timezone is -0000 | |
[ 11.209189] PPP generic driver version 2.4.2 | |
[ 11.214088] NET: Registered protocol family 24 | |
[ 11.222825] kmodloader: done loading kernel modules from /etc/modules.d/* | |
[ 11.233706] random: crng init done | |
[ 11.237133] random: 3 urandom warning(s) missed due to ratelimiting | |
[ 15.382065] mmc0: new DDR MMC card at address 0001 | |
[ 15.387347] mmcblk0: mmc0:0001 SEM04G 3.69 GiB | |
[ 15.392068] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB | |
[ 15.398147] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB | |
[ 15.404189] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 2.00 MiB, chardev (252:0) | |
[ 15.412540] mmcblk0: p1 p2 | |
[ 21.998653] br-lan: port 1(eth0) entered blocking state | |
[ 22.003921] br-lan: port 1(eth0) entered disabled state | |
[ 22.009439] device eth0 entered promiscuous mode | |
BusyBox v1.31.1 () built-in shell (ash) | |
_______ ________ __ | |
| |.-----.-----.-----.| | | |.----.| |_ | |
| - || _ | -__| || | | || _|| _| | |
|_______|| __|_____|__|__||________||__| |____| | |
|__| W I R E L E S S F R E E D O M | |
----------------------------------------------------- | |
OpenWrt SNAPSHOT, r14645-4797a936ee | |
----------------------------------------------------- | |
=== WARNING! ===================================== | |
There is no root password defined on this device! | |
Use the "passwd" command to set up a new password | |
in order to prevent unauthorized SSH logins. | |
-------------------------------------------------- | |
root@OpenWrt:/# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment