gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.24 (david@david) (gcc version 4.8 (GCC) ) #4 SMP PREEMPT Mon May 27 22:09:59 BST 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. MSM8909W-PM8916 SWOC 768MB MTP
[    0.000000] Truncating RAM at 0x80000000-0xb0000000 to -0xaf800000
[    0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x87b00000, size 5 MiB
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x88000000, size 82 MiB
[    0.000000] Reserved memory: reserved region for node 'pheripheral_region@0': base 0x8d200000, size 5 MiB
[    0.000000] Reserved memory: reserved region for node 'pstore_reserve_mem_region@0': base 0x9ff00000, size 1 MiB
[    0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x83000000, size 12 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x87b00000, size 5 MiB
[    0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x88000000, size 82 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x8d200000, size 5 MiB
[    0.000000] Reserved memory: initialized node pheripheral_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'venus_qseecom_region@0' node: base 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: initialized node venus_qseecom_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0xaf400000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0xaf400000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] cma: Reserved 16 MiB at 0xae400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 11 pages/cpu @edd4b000 s13824 r8192 d23040 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 169488
[    0.000000] Kernel command line: sched_enable_hmp=0 console=ttyHSL0,115200,n8 enforcing=0 androidboot.selinux=permissive androidboot.console=ttyHSL0 androidboot.hardware=dorado msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 buildvariant=user log_buf_len=8M androidboot.bootdevice=7824900.sdhci androidboot.verifiedbootstate=orange androidboot.veritymode=logging androidboot.keymaster=1 androidboot.serialno=XU147W7117L220FQ chip_hw_id=L androidboot.bootreason=reboot secured=1 androidboot.bootloader=dorado-v2.19 firstboot earlycon=msm_hsl_uart,0x78b0000 androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_rm67160_400p_cmd:1:none
[    0.000000] log_buf_len: 8388608 bytes
[    0.000000] early log buf free: 127388(97%)
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 604616K/684032K available (12210K kernel code, 984K rwdata, 4636K rodata, 613K init, 2369K bss, 79416K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc107bd68   (16848 kB)
[    0.000000]       .init : 0xc107c000 - 0xc1115600   ( 614 kB)
[    0.000000]       .data : 0xc1116000 - 0xc120c298   ( 985 kB)
[    0.000000]        .bss : 0xc120c35c - 0xc145c9ac   (2370 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000047] Switched to clocksource arch_sys_counter
[    0.001224] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001247] pid_max: default: 32768 minimum: 301
[    0.001375] Security Framework initialized
[    0.001396] SELinux:  Initializing.
[    0.001535] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001552] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002605] Initializing cgroup subsys freezer
[    0.002633] Initializing cgroup subsys debug
[    0.002676] CPU: Testing write buffer coherency: ok
[    0.002720] ftrace: allocating 39716 entries in 117 pages
[    0.083250] /cpus/cpu@0 missing clock-frequency property
[    0.083277] /cpus/cpu@1 missing clock-frequency property
[    0.083298] /cpus/cpu@2 missing clock-frequency property
[    0.083319] /cpus/cpu@3 missing clock-frequency property
[    0.083476] Setting up static identity map for 0x80b14230 - 0x80b14288
[    0.083735] NOHZ: local_softirq_pending 02
[    0.087859] MSM Memory Dump base table set up
[    0.087902] MSM Memory Dump apps data table set up
[    0.090434] CPU1: Booted secondary processor
[    0.092500] CPU2: Booted secondary processor
[    0.094534] CPU3: Booted secondary processor
[    0.094689] Brought up 4 CPUs
[    0.094718] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.094728] CPU: All CPU(s) started in SVC mode.
[    0.100601] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.104864] pinctrl core: initialized pinctrl subsystem
[    0.105464] regulator-dummy: no parameters
[    0.174964] NET: Registered protocol family 16
[    0.179025] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.179149] ramoops: using module parameters
[    0.181207] console [pstore-1] enabled
[    0.181443] pstore: Registered ramoops as persistent store backend
[    0.181460] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
[    0.240180] cpuidle: using governor ladder
[    0.280173] cpuidle: using governor menu
[    0.320173] cpuidle: using governor qcom
[    0.345842] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-peripherals
[    0.345868] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.346428] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
[    0.353388] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.353764] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.355920] platform 1de0000.qcom,venus: assigned reserved memory node venus_qseecom_region@0
[    0.359395] platform soc:qcom,adsprpc-mem: assigned reserved memory node modem_adsp_region@0
[    0.361567] platform a21b000.qcom,pronto: assigned reserved memory node pheripheral_region@0
[    0.362022] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.365658] mem_acc_corner: 0 <--> 0 mV 
[    0.369668] hw-breakpoint: Failed to enable monitor mode on CPU 3.
[    0.375526] __of_mpm_init(): MPM driver mapping exists
[    0.376255] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.376273] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.376289] smd_open() before smd_init()
[    0.378471] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.382306] smd_channel_probe_now: allocation table not initialized
[    0.382483] smd_channel_probe_now: allocation table not initialized
[    0.385496] 8916_s2: 1050 <--> 1350 mV at 1225 mV normal idle 
[    0.385775] spm_regulator_probe: name=8916_s2, range=LV, voltage=1225000 uV, mode=PWM, step rate=1200 uV/us
[    0.386518] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.386573] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.386598] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x1fa8c02a0af9f6f7, speed_bits = 2
[    0.386709] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1012500 below floor 1050000
[    0.386724] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[3] 1150000 below floor 1155000
[    0.386744] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1155000] uV
[    0.386762] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.386778] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.387915] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.388003] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.388025] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.388302] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.388373] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[    0.388393] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[    0.388665] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.388735] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
[    0.388755] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
[    0.389038] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.389108] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
[    0.389128] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
[    0.393829] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.393850] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.393871] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.393888] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.395400] sps:sps is ready.
[    0.396770] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.396791] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.397997] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.398792] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.399551] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.400618] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle 
[    0.401656] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle 
[    0.402661] 8916_l1: 1225 mV normal idle 
[    0.403641] 8916_l2: 1200 mV normal idle 
[    0.404653] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle 
[    0.405370] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.406126] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.407139] 8916_l4: 2050 mV normal idle 
[    0.408144] 8916_l5: 1800 mV normal idle 
[    0.409180] 8916_l6: 1800 mV normal idle 
[    0.410327] 8916_l7: 1800 mV normal idle 
[    0.411119] 8916_l7_ao: 1800 mV normal idle 
[    0.411864] 8916_l7_so: 1800 mV normal idle 
[    0.412921] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
[    0.413892] 8916_l9: 3300 mV normal idle 
[    0.414864] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle 
[    0.415845] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.416825] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.417804] 8916_l13: 3075 mV normal idle 
[    0.418812] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.419797] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.420958] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.421959] 8916_l17: 2850 mV normal idle 
[    0.422965] 8916_l18: 2700 mV normal idle 
[    0.423341] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.423785] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.423846] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.423871] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x1fa8c02a0af9f6f7, speed_bits = 2
[    0.423982] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1012500 below floor 1050000
[    0.423998] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[3] 1150000 below floor 1155000
[    0.424018] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1155000] uV
[    0.424036] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.424052] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.424321] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
[    0.424359] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.424411] cpr_init_cpr_efuse: apc_corner: [row:26] = 0x588c660319d90bf4
[    0.424440] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
[    0.424459] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 793
[    0.424478] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 793
[    0.424496] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1071
[    0.424587] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
[    0.424602] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.945
[    0.424623] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 793
[    0.424638] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 793
[    0.424651] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 793
[    0.424665] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 793
[    0.424679] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 981
[    0.424693] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1071
[    0.424707] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1071
[    0.424721] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1071
[    0.424735] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1071
[    0.424899] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.425476] apc_corner: 0 <--> 0 mV 
[    0.426283] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.426372] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.426395] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.426751] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.426823] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[    0.426843] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[    0.427181] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.427252] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
[    0.427271] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
[    0.427626] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.427697] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
[    0.427716] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
[    0.428361] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.428848] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.428868] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.428881] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.429539] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.429556] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.429574] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.429588] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.436289] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
[    0.449597] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
[    0.450180] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
[    0.450271] a7ssmux: set OPP pair(800000000 Hz: 4 uV) on cpu0
[    0.450289] a7ssmux: set OPP pair(1094400000 Hz: 6 uV) on cpu0
[    0.451900] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.452005] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.452024] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.453914] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.454015] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.454034] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.456523] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.456633] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.456652] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.458061] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.458155] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.458175] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.506072] gdsc_venus: no parameters
[    0.506636] gdsc_mdss: no parameters
[    0.507168] gdsc_vfe: no parameters
[    0.507658] gdsc_oxili_gx: no parameters
[    0.508139] gdsc_venus_core0: fast normal 
[    0.509748] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    0.510960] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
[    0.512541] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: no device nodes specified in topology
[    0.512574] qcom,qpnp-pin: probe of qpnp-pin-2 failed with error -22
[    0.514236] KPI: Bootloader start count = 41756
[    0.514255] KPI: Bootloader end count = 84441
[    0.514267] KPI: Bootloader display count = 66019
[    0.514278] KPI: Bootloader load kernel count = 2482
[    0.514291] KPI: Kernel MPM timestamp = 121011
[    0.514302] KPI: Kernel MPM Clock frequency = 32768
[    0.514338] socinfo_print: v0.10, id=300, ver=2.0, raw_id=81, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[    0.514338]  accessory_chip=0, hw_plat_subtype=9, pmic_model=65547, pmic_die_revision=131072 foundry_id=1 serial_number=184153847
[    0.515551] usbcore: registered new interface driver usbfs
[    0.515674] usbcore: registered new interface driver hub
[    0.515916] usbcore: registered new device driver usb
[    0.516151] media: Linux media interface: v0.10
[    0.516245] Linux video capture interface: v2.00
[    0.516526] BATTERY: batterydata_init: Battery-data device created!
[    0.517703] cpufreq: driver msm up and running
[    0.518352] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node venus_qseecom_region@0
[    0.518655] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    0.518916] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0
[    0.519287] ION heap system created
[    0.519487] ION heap qsecom created at 0x8f800000 with size 800000
[    0.519530] ION heap audio created at 0xaf400000 with size 400000
[    0.519552] ION heap pil_2 created at 0x88000000 with size 5200000
[    0.520176] msm_bus_fabric_init_driver
[    0.541086] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
[    0.541118] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.541439] input: qpnp_pon as /devices/virtual/input/input0
[    0.542357] PMIC@SID0: PM8916 v2.0.1 options: 0, 2, 0, 0
[    0.542685] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f03c0000, with 2 ctx banks
[    0.543713] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0c80000, with 22 ctx banks
[    0.551593] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    0.551861] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    0.552101] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
[    0.552352] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    0.552597] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    0.552846] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[    0.553090] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    0.553336] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    0.553577] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    0.553809] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    0.554050] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[    0.554288] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[    0.554523] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[    0.554765] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    0.555005] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    0.555257] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    0.555510] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    0.555764] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    0.556011] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    0.556265] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    0.556517] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    0.556769] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
[    0.557003] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
[    0.557249] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
[    0.558312] Advanced Linux Sound Architecture Driver Initialized.
[    0.559833] Bluetooth: ed04be98
[    0.559900] NET: Registered protocol family 31
[    0.559912] Bluetooth: ed04be98
[    0.559930] Bluetooth: ed04be80Bluetooth: ed04be60
[    0.559988] Bluetooth: ed04be78[    0.560428] cfg80211: Calling CRDA to update world regulatory domain
[    0.560465] cfg80211: World regulatory domain updated:
[    0.560475] cfg80211:  DFS Master region: unset
[    0.560484] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.560498] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560511] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560523] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560535] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560547] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560559] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560571] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560584] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.560792] nfc: nfc_init: NFC Core ver 0.1
[    0.560865] NET: Registered protocol family 39
[    0.562463] Switched to clocksource arch_sys_counter
[    0.613806] NET: Registered protocol family 2
[    0.614625] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.614705] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.614815] TCP: Hash tables configured (established 8192 bind 8192)
[    0.614876] TCP: reno registered
[    0.614892] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.614936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.615155] NET: Registered protocol family 1
[    0.615863] gcc-mdss-8909 soc:qcom,gcc-mdss@1ac8300: Registered GCC MDSS clocks.
[    0.616689] Trying to unpack rootfs image as initramfs...
[    0.670495] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1094400. Temp:58
[    0.670534] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1094400. Temp:58
[    0.670550] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1094400. Temp:58
[    0.670566] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1094400. Temp:58
[    0.688737] Freeing initrd memory: 1284K (c2000000 - c2141000)
[    0.691402] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.695994] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.696117] audit: initializing netlink subsys (disabled)
[    0.696216] audit: type=2000 audit(0.689:1): initialized
[    0.697023] vmscan: error setting kswapd cpu affinity mask
[    0.705955] fuse init (API version 7.23)
[    0.709278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.709303] io scheduler noop registered
[    0.709319] io scheduler deadline registered
[    0.709476] io scheduler cfq registered (default)
[    0.714474] xlog_status: enable:1, panic:1, dump:2
[    0.717593] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    0.717656] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[    0.717713] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    0.717732] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[    0.719832] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    0.720196] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_rm67160_400p_cmd:1:none panel_name:qcom,mdss_dsi_rm67160_400p_cmd
[    0.720400] mdss_dsi_find_panel_of_node: invalid pan node "qcom,mdss_dsi_rm67160_400p_cmd"
[    0.720425] mdss_dsi_panel_init: Panel Name = EverDisplay rm67160 400p command mode dsi panel
[    0.720691] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_everdisp_rm67160_400p_cmd" (ed04b6d8)
[    0.720727] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    0.720743] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    0.720922] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
[    0.720940] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
[    0.720971] mdss_dsi_parse_panel_features: partial_update_enabled=0
[    0.720989] mdss_dsi_parse_panel_features: ulps feature disabled
[    0.721003] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    0.721017] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    0.721313] mdss_dsi_parse_ctrl_params:3875 Unable to read qcom,display-id, data=00000000,len=45
[    0.721426] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=f02ae780 phy_regulator_size=30
[    0.721440] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f02a6000 ctrl_size=25c phy_base=f02ac500 phy_size=280
[    0.721792] dsi_panel_device_register: Continuous splash enabled
[    0.722081] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi_ctrl0
[    0.729761] mdss_dsi_status_init: DSI status check interval:5000
[    0.731010] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[    0.732075] mdss_fb_register: FrameBuffer[0] 400x400 registered successfully!
[    0.732088] mdp3_ctrl_init: mdp3_ctrl_init
[    0.732294] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
[    0.735946] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    0.742939] In memshare_probe, Memshare probe success
[    0.745734] msm_rpm_log_probe: OK
[    0.770680] devfreq 1c00000.qcom,kgsl-3d0: Couldn't update frequency transition information.
[    0.778697] brd: module loaded
[    0.782476] loop: module loaded
[    0.783064] zram: Created 1 device(s) ...
[    0.783688] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
[    0.783740] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    0.783755] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[    0.783767] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[    0.784303] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
[    0.840456] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[    0.880362] nq-nci 2-0028: nfcc_hw_check: - nq - reset cmd answer : NfcNciRx 40 0 3
[    0.880460] nq-nci 2-0028: nqx_probe: probing NFCC NQxxx exited successfully
[    0.881116] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    0.882157] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
[    0.882179] qce 720000.qcedev: CE device = 0x0
[    0.882179] , IO base, CE = 0xf0640000
[    0.882179] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    0.882179] IO base BAM = 0x  (null)
[    0.882179] BAM IRQ 83
[    0.882179] Engines Availability = 0x2010853
[    0.882621] sps:BAM 0x00704000 is registered.
[    0.883114] sps:BAM 0x00704000 (va:0xf07c0000) enabled: ver:0x25, number of pipes:8
[    0.883950] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 83
[    0.887455] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    0.888375] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
[    0.888395] qcrypto 720000.qcrypto: CE device = 0x0
[    0.888395] , IO base, CE = 0xf0c40000
[    0.888395] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    0.888395] IO base BAM = 0x  (null)
[    0.888395] BAM IRQ 83
[    0.888395] Engines Availability = 0x2010853
[    0.889545] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 83
[    0.892006] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[    0.892183] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[    0.892337] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[    0.892520] qcrypto 720000.qcrypto: qcrypto-ecb-des
[    0.892663] qcrypto 720000.qcrypto: qcrypto-cbc-des
[    0.892796] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[    0.892932] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[    0.893062] qcrypto 720000.qcrypto: qcrypto-xts-aes
[    0.893197] qcrypto 720000.qcrypto: qcrypto-sha1
[    0.893326] qcrypto 720000.qcrypto: qcrypto-sha256
[    0.893459] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    0.893589] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    0.893733] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    0.893863] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    0.893998] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    0.894128] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    0.894261] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[    0.894405] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[    0.894534] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[    0.894666] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[    0.898711] tun: Universal TUN/TAP device driver, 1.6
[    0.898726] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.902441] PPP generic driver version 2.4.2
[    0.902625] PPP BSD Compression module registered
[    0.902643] PPP Deflate Compression module registered
[    0.902674] PPP MPPE Compression module registered
[    0.902698] NET: Registered protocol family 24
[    0.903695] wcnss_wlan probed in built-in mode
[    0.904932] usbcore: registered new interface driver asix
[    0.905043] usbcore: registered new interface driver ax88179_178a
[    0.905117] usbcore: registered new interface driver cdc_ether
[    0.905188] usbcore: registered new interface driver net1080
[    0.905260] usbcore: registered new interface driver cdc_subset
[    0.905331] usbcore: registered new interface driver zaurus
[    0.905685] usbcore: registered new interface driver cdc_ncm
[    0.906306] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    0.906619] hyp_assign_table: Failed to assign memory protection, ret = -19
[    0.906636] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x87c00000 size=917504 err=-19
[    0.906846] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    0.907067] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[    0.907269] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[    0.907910] msm_otg 78d9000.usb: msm_otg probe
[    0.911880] msm_otg 78d9000.usb: OTG regs = f02f8000
[    0.914510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.914533] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    0.915220] usbcore: registered new interface driver cdc_acm
[    0.915232] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.915425] usbcore: registered new interface driver usbserial
[    0.915511] usbcore: registered new interface driver usb_ehset_test
[    0.916592] gbridge_init: gbridge_init successs.
[    0.917834] mousedev: PS/2 mouse device common for all mice
[    0.918076] [elan] elan_ktf_ts_init driver version 0x0005: Integrated 2, 5, and 10 fingers together and auto-mapping resolution
[    0.918602] [Stanley]elan_ktf_ts_probe called 
[    0.918614] [Stanley]elan_ktf_ts_probe: client->dev.of_node exists 
[    0.918624] [Stanley]elan_ktf_parse_dt called 
[    0.918656] msm_otg 78d9000.usb: phy_reset: success
[    0.918660] [stanley]elan_ktf_parse_dt: reset gpio=12, flags=0 
[    0.918679] [stanley]elan_ktf_parse_dt: interrupt gpio=13, flags=0 
[    0.918688] [Stanley]elan_ktf_ts_probe: parse elan touch dt done 
[    0.918699] [Stanley]elan_ktf_ts_probe current MT protocol=A 
[    0.918710] [Stanley]elan_ktf_power_init 
[    0.918898] [Stanley]elan_ktf_power_on: on=1 
[    0.960102] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.010121] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.060137] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.110153] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.160211] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.170330] msm_thermal:do_freq_control Limiting CPU0 max frequency to 800000. Temp:60
[    1.170406] msm_thermal:do_freq_control Limiting CPU1 max frequency to 800000. Temp:60
[    1.170429] msm_thermal:do_freq_control Limiting CPU2 max frequency to 800000. Temp:60
[    1.170450] msm_thermal:do_freq_control Limiting CPU3 max frequency to 800000. Temp:60
[    1.210495] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.260518] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.310541] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.311072] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
[    1.312096] [elan] __hello_packet_handler: hello packet 55:55:55:55:ff:ff:ff:ff
[    1.312636] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.313716] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.314794] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.315356] [elan] __fw_packet_handler: Firmware version: 0xb013
[    1.315370] [elan] __fw_packet_handler: Firmware ID: 0x0f65
[    1.315383] [elan] __fw_packet_handler: Bootcode Version: 0x1000
[    1.315396] [elan] __fw_packet_handler: x resolution: 1024, y resolution: 1024
[    1.315776] input: elan-touchscreen as /devices/virtual/input/input1
[    1.316429] [ELAN] disable IRQ 107[ELAN] disable IRQ 107
[    1.316493] elan_ktf 5-0015: [elan] Start touchscreen elan-touchscreen in interrupt mode
[    1.316649] [elan]misc_register finished!!
[    1.316963] [Stanley]elan_ktf_ts_probe: INIT_DEFERRABLE_WORK 
[    1.316978] [Stanley]elan_ktf_ts_probe: INIT_DEFERRABLE_WORK
[    1.317060] i2c-core: driver [elan_ktf] using legacy suspend method
[    1.317073] i2c-core: driver [elan_ktf] using legacy resume method
[    1.317714] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
[    1.318013] i2c /dev entries driver
[    1.322146] [Stanley]elan_work: elan_work
[    1.322168] [Stanley]elan_work: case elan_work() 
[    1.326825] 
[    1.326825] 
[    1.326825] stc311x probe started
[    1.326825] 
[    1.326856] STC311x: stc3317_parse_dt: stc3317_parse_dt: stc3317_parse_dt()
[    1.326872] STC311x: stc3317_parse_dt: stc3317_parse_dt: Vmode=0
[    1.326887] STC311x: stc3317_parse_dt: stc3317_parse_dt: Alm_SOC=10
[    1.326901] STC311x: stc3317_parse_dt: stc3317_parse_dt: Alm_Vbat=3681
[    1.326916] STC311x: stc3317_parse_dt: stc3317_parse_dt: CC_cnf=89
[    1.326930] STC311x: stc3317_parse_dt: stc3317_parse_dt: VM_cnf=461
[    1.326945] STC311x: stc3317_parse_dt: stc3317_parse_dt: Rint=1037
[    1.326959] STC311x: stc3317_parse_dt: stc3317_parse_dt: Cnom=450
[    1.326974] STC311x: stc3317_parse_dt: stc3317_parse_dt: Rsense=10
[    1.326989] STC311x: stc3317_parse_dt: stc3317_parse_dt: RelaxCurrent=8
[    1.327003] STC311x: stc3317_parse_dt: stc3317_parse_dt: Adaptive=1
[    1.327020] STC311x: stc3317_parse_dt: stc3317_parse_dt: CapDerating[0]=0, [6]=900
[    1.327036] STC311x: stc3317_parse_dt: stc3317_parse_dt: OCVValue[0]=3300, [15]=4306
[    1.327052] STC311x: stc3317_parse_dt: stc3317_parse_dt: ForceExternalTemperature=0
[    1.327065] STC311x: stc3317_parse_dt: stc3317_parse_dt: end of dt parsing
[    1.327985] stc3117-204 4-0070: power supply register,0
[    1.328007] stc3117-204 4-0070: STC3117 Fuel-Gauge Ver 1.01a
[    1.328534] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
[    1.340904] STC311x: STC311x_SetParam: STC311x_SetParam: BattData.CurrentFactor=2408
[    1.616837] STC311x: stc311x_probe: stc3117-204 FG successfully probed
[    1.616919] i2c-core: driver [stc3117-204] using legacy suspend method
[    1.616933] i2c-core: driver [stc3117-204] using legacy resume method
[    1.617671] SMB348 smb348_charger_probe: smb348_charger_probe HW_ID: 5
[    1.618061] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x57 MSTR_STS:0x011363c8 OPER:0x00000010
[    1.642388] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.642918] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.655606] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.657509] smb348-charger 4-0057: WPC status=0
[    1.657633] SMB348 smb348_charger_probe: detect_pin=0, stat_pin=0
[    1.657664] SMB348 smb348_charger_probe: Dock state is REMOVED
[    1.663067] msm_otg 78d9000.usb: USB in low power mode
[    1.663619] smb348-charger 4-0057: SMB348 successfully probed. charger=0, batt=1
[    1.663636] SMB348 smb348_charger_probe: wpc detect value 2: 1
[    1.664120] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
[    1.665405] unable to find DT imem DLOAD mode node
[    1.666028] unable to find DT imem EDLOAD mode node
[    1.666589] unable to find DT imem dload-type node
[    1.667062] Failed to disable secure wdog debug: -4
[    1.668822] thermal thermal_zone2: failed to read out thermal zone 2
[    1.669308] thermal thermal_zone3: failed to read out thermal zone 3
[    1.669775] thermal thermal_zone4: failed to read out thermal zone 4
[    1.674603] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    1.675209] sdhci: Secure Digital Host Controller Interface driver
[    1.675224] sdhci: Copyright(c) Pierre Ossman
[    1.675245] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.676244] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    1.676750] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    1.681927] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    1.681950] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    1.682587] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    1.713823] tz_log 8600720.tz-log: Hyp log service is not supported
[    1.716092] usbcore: registered new interface driver usbhid
[    1.716107] usbhid: USB HID core driver
[    1.718576] ashmem: initialized
[    1.723388] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
[    1.723703] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    1.730506] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    1.732053] probe: Version mismatch expected 0x20000 got 0x0
[    1.755565] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
[    1.765858] u32 classifier
[    1.765879]     Actions configured
[    1.765945] Netfilter messages via NETLINK v0.30.
[    1.766045] nf_conntrack version 0.5.0 (9915 buckets, 39660 max)
[    1.766875] ctnetlink v0.93: registering with nfnetlink.
[    1.768126] xt_time: kernel timezone is -0000
[    1.768729] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.769049] arp_tables: (C) 2002 David S. Miller
[    1.769168] TCP: cubic registered
[    1.769191] Initializing XFRM netlink socket
[    1.770241] NET: Registered protocol family 10
[    1.772634] mip6: Mobile IPv6
[    1.772702] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.772976] sit: IPv6 over IPv4 tunneling driver
[    1.774100] NET: Registered protocol family 17
[    1.774160] NET: Registered protocol family 15
[    1.774371] Bluetooth: ed04be70
[    1.774402] Bluetooth: ed04be68Bluetooth: ed04be88
[    1.774480] Bluetooth: ed04be60Bluetooth: ed04be60
[    1.774532] Bluetooth: ed04be48Bluetooth: ed04bea0
[    1.774574] Bluetooth: ed04be88[    1.774636] l2tp_core: L2TP core driver, V2.0
[    1.774674] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.774694] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    1.774746] l2tp_netlink: L2TP netlink interface
[    1.774803] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    1.774852] l2tp_debugfs: L2TP debugfs support
[    1.774873] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    1.775976] NET: Registered protocol family 27
[    1.785044] CHG: qpnp_lbc_main_probe: Disabling Linear Charger (e-external-charger = 1)
[    1.789369] Registering SWP/SWPB emulation handler
[    1.789548] Creating CPU group 0
[    1.789563] Init CPU0 state
[    1.789574] Init CPU1 state
[    1.789585] Init CPU2 state
[    1.789596] Init CPU3 state
[    1.793849] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
[    1.894258] mmc0: Out-of-interrupt timeout is 50[ms]
[    1.894282] mmc0: BKOPS_EN equals 0x0
[    1.894296] mmc0: eMMC FW version: 0x02
[    1.894308] mmc0: cache barrier support 0 flush policy 0
[    1.908671] mmc0: new HS200 MMC card at address 0001
[    1.909407] mmcblk0: mmc0:0001 FJ27BA 3.64 GiB 
[    1.909624] mmcblk0boot0: mmc0:0001 FJ27BA partition 1 4.00 MiB
[    1.909828] mmcblk0boot1: mmc0:0001 FJ27BA partition 2 4.00 MiB
[    1.910041] mmcblk0rpmb: mmc0:0001 FJ27BA partition 3 512 KiB
[    1.913484]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
[    1.988285] file system registered
[    1.988455] mbim_init: initialize 1 instances
[    1.988598] mbim_init: Initialized 1 ports
[    1.991274] rndis_qc_init: initialize rndis QC instance
[    1.991856] Number of LUNs=8
[    1.991877] Mass Storage Function, version: 2009/09/11
[    1.991894] LUN: removable file: (no medium)
[    1.991924] Number of LUNs=1
[    1.992046] LUN: removable file: (no medium)
[    1.992059] Number of LUNs=1
[    1.992606] android_usb gadget: android_usb ready
[    1.992628] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
[    1.997650] msm_otg 78d9000.usb: phy_reset: success
[    2.100940] msm_otg 78d9000.usb: USB exited from low power mode
[    2.100984] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[    2.105189] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-09 05:00:39 UTC (709239)
[    2.105813] msm_otg 78d9000.usb: USB in low power mode
[    2.107337] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[    2.107584] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[    2.107656] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[    2.107724] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[    2.109405] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[    2.114744] msm8952-asoc-wcd 7702000.sound: default codec configured
[    2.115067] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.115122] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.115494] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.115723] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.115770] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.115818] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.115922] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.115970] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116019] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116069] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116120] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116171] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116222] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116274] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116327] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116379] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116433] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116486] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.116591] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.117033] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[    2.117091] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[    2.117647] clock_late_init: Removing enables held for handed-off clocks
[    2.120736] mem_acc_corner: disabling
[    2.120765] ALSA device list:
[    2.120774]   No soundcards found.
[    2.120908] Warning: unable to open an initial console.
[    2.121631] Freeing unused kernel memory: 612K (c107c000 - c1115000)
[    2.123694] init: init first stage started!
[    2.194662] audit: type=1403 audit(709239.579:2): policy loaded auid=4294967295 ses=4294967295
[    2.195245] audit: type=1404 audit(709239.579:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.196027] init: (Initializing SELinux enforcing took 0.07s.)
[    2.204182] init: init second stage started!
[    2.221522] init: Running restorecon...
[    2.538942] init: waitpid failed: No child processes
[    2.539867] init: (Loading properties from /default.prop took 0.00s.)
[    2.544471] init: (Parsing /init.environ.rc took 0.00s.)
[    2.545679] init: (Parsing /init.usb.rc took 0.00s.)
[    2.549656] init: /init.dorado.rc: 530: user requires 1 argument
[    2.564360] init: (Parsing init.qcom.usb.rc took 0.01s.)
[    2.565343] init: init.target.rc: 126: invalid keyword 'load_all_props'
[    2.565896] init: ignored duplicate definition of service 'dhcpcd_bt-pan'init: ignored duplicate definition of service 'iprenew_bt-pan'init: (Parsing init.target.rc took 0.00s.)
[    2.567946] init: (Parsing init.qcom.factory.rc took 0.00s.)
[    2.567988] init: (Parsing /init.dorado.rc took 0.02s.)
[    2.570142] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    2.570389] init: (Parsing /init.zygote32.rc took 0.00s.)
[    2.570429] init: (Parsing /init.rc took 0.03s.)
[    2.571408] init: Starting service 'ueventd'...
[    2.573284] init: Waiting for /dev/.coldboot_done...
[    2.576364] ueventd: ueventd started!
[    2.963159] SMB348 smb348_get_prop_batt_capacity: soc=61, chg_end=0, chg_full_flag=0, recharge_flag=0
[    2.963194] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    2.963205] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    2.963220] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    3.319753] ueventd: Coldboot took 0.74s.
[    3.322404] init: Waiting for /dev/.coldboot_done took 0.75s.
[    3.333645] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[    3.343246] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[    3.355351] fs_mgr: Failed to get verity metadata '/dev/block/platform/soc/7824900.sdhci/by-name/system' (Success)
[    3.355507] fs_mgr: Could not set up verified partition, skipping!
[    3.356199] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
[    3.360708] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    3.360893] fs_mgr: check_fs(): mount(/dev/block/platform/soc/7824900.sdhci/by-name/userdata,/data,ext4)=0: Success
[    3.364158] fs_mgr: check_fs(): unmount(/data) succeeded
[    3.364233] fs_mgr: Not running /system/bin/e2fsck on /dev/block/platform/soc/7824900.sdhci/by-name/userdata (executable not in system image)
[    3.370126] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
[    3.370271] fs_mgr: __mount(source=/dev/block/platform/soc/7824900.sdhci/by-name/userdata,target=/data,type=ext4)=0
[    3.381026] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
[    3.381589] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.389080] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.403612] init: do_start: Service logd not found
[    4.396520] init: (Loading properties from /system/build.prop took 0.00s.)
[    4.396593] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    4.396646] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    4.396936] init: /recovery not specified in fstab
[    4.397354] init: do_start: Service debuggerd not found
[    4.397395] init: do_start: Service debuggerd64 not found
[    4.397430] init: do_start: Service vold not found
[    4.399350] init: Not bootcharting.
[    4.479011] init: cannot find '/system/bin/tzdatacheck' (No such file or directory), disabling 'exec 1 (/system/bin/tzdatacheck)'
[    4.497677] init: cannot find '/system/vendor/bin/perfd' (No such file or directory), disabling 'perfd'
[    4.499557] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
[    4.515043] random: init urandom read with 87 bits of entropy available
[    4.574097] init: do_start: Service logd not found
[    4.574153] init: do_start: Service logd-reinit not found
[    4.574361] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    4.574391] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
[    4.574438] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[    4.574463] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
[    4.574509] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[    4.574533] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
[    4.574580] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[    4.574604] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
[    4.576912] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8cf00000
[    4.583471] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[    4.585377] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0xae800000 to 0xae900000
[    4.632602] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[    5.232571] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[    5.311787] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[    5.311869] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[    5.311992] msm8952-asoc-wcd 7702000.sound: default codec configured
[    5.312103] M-Notify: General: 7
[    5.312327] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.312381] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.312768] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.313029] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.313084] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313116] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
[    5.313137] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.313249] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313300] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313353] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313405] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313456] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313509] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313565] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313642] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313726] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313795] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313861] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.313927] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.314053] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.314561] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[    5.314634] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[    5.314922] init: cannot execve('/init.qcom.early_boot.sh'): No such file or directory
[    5.315656] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 268) exited with status 127
[    5.321039] init: Starting service 'healthd'...
[    5.321727] init: cannot find '/system/bin/hwinfo' (No such file or directory), disabling 'hwinfo'
[    5.321791] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-debug'
[    5.321846] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-c_core-sh'
[    5.321891] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
[    5.321931] init: cannot find '/system/bin/tftp_server' (No such file or directory), disabling 'tftp_server'
[    5.321987] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'config_bluetooth'
[    5.322082] init: cannot find '/system/bin/qseecomd' (No such file or directory), disabling 'qseecomd'
[    5.322145] init: cannot find '/system/bin/pm-service' (No such file or directory), disabling 'per_mgr'
[    5.326013] binder: 269:269 transaction failed 29189, size 0-0
[    5.327987] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[    5.328063] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[    5.328132] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[    5.328199] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[    5.328267] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[    5.328334] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[    5.328401] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[    5.328468] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[    5.328535] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[    5.328604] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[    5.328672] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[    5.328739] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[    5.328810] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[    5.328876] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[    5.328944] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[    5.329011] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[    5.329078] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[    5.329146] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[    5.329213] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[    5.329280] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[    5.334665] init: cannot find '/system/bin/rmt_storage' (No such file or directory), disabling 'rmt_storage'
[    5.334735] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directory
[    5.336383] enable_store: android_usb: already disabled
[    5.337106] init: Starting service 'adbd'...
[    5.338127] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
[    5.338210] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
[    5.338253] init: cannot find '/system/bin/macgen' (No such file or directory), disabling 'wcn-mac'
[    5.338301] init: cannot find '/system/bin/macgen' (No such file or directory), disabling 'bt-mac'
[    5.338353] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-c_main-sh'
[    5.338398] init: cannot find '/system/bin/irsc_util' (No such file or directory), disabling 'irsc_util'
[    5.338478] init: cannot find '/system/bin/ptt_socket_app' (No such file or directory), disabling 'ptt_socket_app'
[    5.338525] init: cannot find '/system/bin/cnss_diag' (No such file or directory), disabling 'cnss_diag'
[    5.338584] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
[    5.338655] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'bms-sh'
[    5.338697] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-usb-sh'
[    5.338738] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
[    5.338780] init: cannot find '/system/vendor/bin/thermal-engine' (No such file or directory), disabling 'thermal-engine'
[    5.338822] init: cannot find '/system/bin/wcnss_service' (No such file or directory), disabling 'wcnss-service'
[    5.338864] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
[    5.338904] init: cannot find '/system/bin/ClockworkProxy' (No such file or directory), disabling 'clockwork_proxy'
[    5.338945] init: cannot find '/system/bin/app_process' (No such file or directory), disabling 'zygote'
[    5.339016] init: cannot find '/system/bin/cnd' (No such file or directory), disabling 'cnd'
[    5.339069] init: cannot find '/system/bin/dpmd' (No such file or directory), disabling 'dpmd'
[    5.339122] init: cannot find '/system/bin/cnss-daemon' (No such file or directory), disabling 'cnss-daemon'
[    5.339165] init: cannot find '/system/bin/loc_launcher' (No such file or directory), disabling 'loc_launcher'
[    5.339205] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-sh'
[    5.339250] init: cannot find '/system/vendor/bin/RIDLClient.exe' (No such file or directory), disabling 'RIDL'
[    5.339300] init: cannot find '/system/bin/time_daemon' (No such file or directory), disabling 'time_daemon'
[    5.339344] init: cannot find '/system/bin/audiod' (No such file or directory), disabling 'audiod'
[    9.432968] SMB348 smb348_wpc_dock_handler: wpc detect pin changed!! chg_end=0 state=0 enable=0, detect=1
[    9.433011] SMB348 smb348_wpc_dock_work: current dock state = 0, chip->wpc_dock_present = 1
[    9.433093] SMB348 smb348_wpc_dock_work: Dock state changed - PRESENT
[    9.438358] SMB348 chg_uv: TYPE: USB
[    9.443121] SMB348 smb348_get_prop_batt_capacity: soc=61, chg_end=0, chg_full_flag=0, recharge_flag=0
[    9.443153] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    9.443164] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    9.443179] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    9.613044] SMB348 smb348_get_prop_batt_capacity: soc=61, chg_end=0, chg_full_flag=0, recharge_flag=0
[    9.613073] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    9.613084] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    9.613098] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    9.770721] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[    9.800371] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler ec3c2780 is not open
[    9.800482] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler ec3c2780 is not open[   10.041165] SMB348 smb348_get_prop_batt_capacity: soc=61, chg_end=0, chg_full_flag=0, recharge_flag=0
[   10.041197] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[   10.041208] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[   10.041222] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[   22.095559] SysRq : Emergency Remount R/O
[   22.199991] reboot: Restarting system with command 'recovery'
[   22.200021] Going down for restart now
[   22.200816] Failed to disable secure wdog debug: -4
[   22.200841] Calling SCM to disable SPMI PMIC arbiter