gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.242.1.0 (david@david) (gcc version 4.8 (GCC) ) #5 SMP PREEMPT Wed May 29 13:06:14 BST 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. MSM8909W-PM8916 SWOC 768MB MTP
[    0.000000] Truncating RAM at 0x80000000-0xb0000000 to -0xaf800000
[    0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x87b00000, size 5 MiB
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x88000000, size 82 MiB
[    0.000000] Reserved memory: reserved region for node 'pheripheral_region@0': base 0x8d200000, size 5 MiB
[    0.000000] Reserved memory: reserved region for node 'pstore_reserve_mem_region@0': base 0x9ff00000, size 1 MiB
[    0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x83000000, size 12 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x87b00000, size 5 MiB
[    0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x88000000, size 82 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x8d200000, size 5 MiB
[    0.000000] Reserved memory: initialized node pheripheral_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'venus_qseecom_region@0' node: base 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: initialized node venus_qseecom_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0xaf400000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0xaf400000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] cma: Reserved 16 MiB at 0xae400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 11 pages/cpu @edd4b000 s14016 r8192 d22848 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 169488
[    0.000000] Kernel command line: sched_enable_hmp=0 console=ttyHSL0,115200,n8 enforcing=0 androidboot.selinux=permissive androidboot.console=ttyHSL0 androidboot.hardware=dorado msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 buildvariant=user log_buf_len=8M androidboot.bootdevice=7824900.sdhci androidboot.verifiedbootstate=orange androidboot.veritymode=logging androidboot.keymaster=1 androidboot.serialno=XU147W7117L220FQ chip_hw_id=L androidboot.bootreason=kernel_panic secured=1 androidboot.bootloader=dorado-v2.19 earlycon=msm_hsl_uart,0x78b0000 androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_rm67160_400p_cmd:1:none
[    0.000000] log_buf_len: 8388608 bytes
[    0.000000] early log buf free: 127384(97%)
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 604616K/684032K available (12211K kernel code, 984K rwdata, 4636K rodata, 613K init, 2368K bss, 79416K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc107bfd4   (16848 kB)
[    0.000000]       .init : 0xc107c000 - 0xc11156c0   ( 614 kB)
[    0.000000]       .data : 0xc1116000 - 0xc120c258   ( 985 kB)
[    0.000000]        .bss : 0xc120c31c - 0xc145c4ac   (2369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000047] Switched to clocksource arch_sys_counter
[    0.001220] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001243] pid_max: default: 32768 minimum: 301
[    0.001372] Security Framework initialized
[    0.001392] SELinux:  Initializing.
[    0.001534] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001551] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002606] Initializing cgroup subsys freezer
[    0.002634] Initializing cgroup subsys debug
[    0.002678] CPU: Testing write buffer coherency: ok
[    0.002722] ftrace: allocating 39747 entries in 117 pages
[    0.083297] /cpus/cpu@0 missing clock-frequency property
[    0.083323] /cpus/cpu@1 missing clock-frequency property
[    0.083344] /cpus/cpu@2 missing clock-frequency property
[    0.083365] /cpus/cpu@3 missing clock-frequency property
[    0.083525] Setting up static identity map for 0x80b14370 - 0x80b143c8
[    0.083785] NOHZ: local_softirq_pending 02
[    0.087910] MSM Memory Dump base table set up
[    0.087950] MSM Memory Dump apps data table set up
[    0.090478] CPU1: Booted secondary processor
[    0.092546] CPU2: Booted secondary processor
[    0.094593] CPU3: Booted secondary processor
[    0.094742] Brought up 4 CPUs
[    0.094771] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.094780] CPU: All CPU(s) started in SVC mode.
[    0.100548] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.104822] pinctrl core: initialized pinctrl subsystem
[    0.105421] regulator-dummy: no parameters
[    0.175867] NET: Registered protocol family 16
[    0.179937] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.180106] ramoops: using module parameters
[    0.182142] console [pstore-1] enabled
[    0.182382] pstore: Registered ramoops as persistent store backend
[    0.182399] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
[    0.240182] cpuidle: using governor ladder
[    0.280174] cpuidle: using governor menu
[    0.320171] cpuidle: using governor qcom
[    0.345738] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-peripherals
[    0.345764] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.346327] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
[    0.353311] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.353676] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.355816] platform 1de0000.qcom,venus: assigned reserved memory node venus_qseecom_region@0
[    0.359285] platform soc:qcom,adsprpc-mem: assigned reserved memory node modem_adsp_region@0
[    0.361466] platform a21b000.qcom,pronto: assigned reserved memory node pheripheral_region@0
[    0.361915] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.365531] mem_acc_corner: 0 <--> 0 mV 
[    0.369527] hw-breakpoint: Failed to enable monitor mode on CPU 3.
[    0.375396] __of_mpm_init(): MPM driver mapping exists
[    0.376125] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.376143] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.376158] smd_open() before smd_init()
[    0.378329] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.382165] smd_channel_probe_now: allocation table not initialized
[    0.382343] smd_channel_probe_now: allocation table not initialized
[    0.385353] 8916_s2: 1050 <--> 1350 mV at 1225 mV normal idle 
[    0.385631] spm_regulator_probe: name=8916_s2, range=LV, voltage=1225000 uV, mode=PWM, step rate=1200 uV/us
[    0.386375] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.386431] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.386456] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x1fa8c02a0af9f6f7, speed_bits = 2
[    0.386566] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1012500 below floor 1050000
[    0.386582] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[3] 1150000 below floor 1155000
[    0.386602] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1155000] uV
[    0.386619] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.386636] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.387763] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.387849] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.387871] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.388145] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.388214] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[    0.388234] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[    0.388504] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.388574] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
[    0.388594] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
[    0.388877] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.388945] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
[    0.388965] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
[    0.393658] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.393679] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.393701] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.393718] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.395230] sps:sps is ready.
[    0.396635] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.396656] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.397707] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.398497] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.399257] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.400298] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle 
[    0.401338] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle 
[    0.402336] 8916_l1: 1225 mV normal idle 
[    0.403314] 8916_l2: 1200 mV normal idle 
[    0.404308] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle 
[    0.405024] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.405765] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.406775] 8916_l4: 2050 mV normal idle 
[    0.407779] 8916_l5: 1800 mV normal idle 
[    0.408806] 8916_l6: 1800 mV normal idle 
[    0.409806] 8916_l7: 1800 mV normal idle 
[    0.410728] 8916_l7_ao: 1800 mV normal idle 
[    0.411504] 8916_l7_so: 1800 mV normal idle 
[    0.412560] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
[    0.413565] 8916_l9: 3300 mV normal idle 
[    0.414524] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle 
[    0.415499] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.416482] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.417459] 8916_l13: 3075 mV normal idle 
[    0.418477] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.419488] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.420576] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.421607] 8916_l17: 2850 mV normal idle 
[    0.422588] 8916_l18: 2700 mV normal idle 
[    0.422968] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.423395] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.423456] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.423481] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x1fa8c02a0af9f6f7, speed_bits = 2
[    0.423593] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1012500 below floor 1050000
[    0.423609] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[3] 1150000 below floor 1155000
[    0.423629] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1155000] uV
[    0.423646] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.423662] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.423923] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
[    0.423962] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.424006] cpr_init_cpr_efuse: apc_corner: [row:26] = 0x588c660319d90bf4
[    0.424035] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
[    0.424054] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 793
[    0.424073] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 793
[    0.424091] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1071
[    0.424194] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
[    0.424211] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.945
[    0.424231] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 793
[    0.424245] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 793
[    0.424259] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 793
[    0.424273] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 793
[    0.424287] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 981
[    0.424301] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1071
[    0.424315] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1071
[    0.424329] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1071
[    0.424343] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1071
[    0.424511] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.425090] apc_corner: 0 <--> 0 mV 
[    0.425904] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.425992] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[    0.426012] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[    0.426365] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.426435] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[    0.426455] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[    0.426796] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.426865] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
[    0.426885] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
[    0.427234] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.427302] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
[    0.427321] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
[    0.427967] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.428457] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.428477] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.428490] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.429152] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.429169] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.429188] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.429202] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.435952] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
[    0.449175] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
[    0.449645] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
[    0.449732] a7ssmux: set OPP pair(800000000 Hz: 4 uV) on cpu0
[    0.449749] a7ssmux: set OPP pair(1094400000 Hz: 6 uV) on cpu0
[    0.451444] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.451549] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.451569] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.453481] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.453579] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.453597] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.456057] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.456168] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.456187] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.457598] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.457692] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.457711] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.505578] gdsc_venus: no parameters
[    0.506112] gdsc_mdss: no parameters
[    0.506660] gdsc_vfe: no parameters
[    0.507121] gdsc_oxili_gx: no parameters
[    0.507644] gdsc_venus_core0: fast normal 
[    0.509219] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    0.510430] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
[    0.512011] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: no device nodes specified in topology
[    0.512046] qcom,qpnp-pin: probe of qpnp-pin-2 failed with error -22
[    0.513719] KPI: Bootloader start count = 46974
[    0.513737] KPI: Bootloader end count = 88205
[    0.513749] KPI: Bootloader display count = 70314
[    0.513760] KPI: Bootloader load kernel count = 2247
[    0.513773] KPI: Kernel MPM timestamp = 124753
[    0.513784] KPI: Kernel MPM Clock frequency = 32768
[    0.513820] socinfo_print: v0.10, id=300, ver=2.0, raw_id=81, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[    0.513820]  accessory_chip=0, hw_plat_subtype=9, pmic_model=65547, pmic_die_revision=131072 foundry_id=1 serial_number=184153847
[    0.515053] usbcore: registered new interface driver usbfs
[    0.515178] usbcore: registered new interface driver hub
[    0.515402] usbcore: registered new device driver usb
[    0.515625] media: Linux media interface: v0.10
[    0.515744] Linux video capture interface: v2.00
[    0.516017] BATTERY: batterydata_init: Battery-data device created!
[    0.517287] cpufreq: driver msm up and running
[    0.517942] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node venus_qseecom_region@0
[    0.518243] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    0.518502] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0
[    0.518865] ION heap system created
[    0.519073] ION heap qsecom created at 0x8f800000 with size 800000
[    0.519097] ION heap audio created at 0xaf400000 with size 400000
[    0.519118] ION heap pil_2 created at 0x88000000 with size 5200000
[    0.519685] msm_bus_fabric_init_driver
[    0.541183] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
[    0.541218] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.541535] input: qpnp_pon as /devices/virtual/input/input0
[    0.542458] PMIC@SID0: PM8916 v2.0.1 options: 0, 2, 0, 0
[    0.542781] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f03c0000, with 2 ctx banks
[    0.543781] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0c80000, with 22 ctx banks
[    0.551688] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    0.551953] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    0.552192] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
[    0.552446] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    0.552700] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    0.552948] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[    0.553191] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    0.553436] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    0.553677] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    0.553908] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    0.554140] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[    0.554379] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[    0.554612] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[    0.554862] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    0.555102] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    0.555347] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    0.555593] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    0.555845] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    0.556097] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    0.556342] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    0.556587] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    0.556845] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
[    0.557092] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
[    0.557355] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
[    0.558334] Advanced Linux Sound Architecture Driver Initialized.
[    0.559862] Bluetooth: ed04be98
[    0.559928] NET: Registered protocol family 31
[    0.559940] Bluetooth: ed04be98
[    0.559957] Bluetooth: ed04be80Bluetooth: ed04be60
[    0.560015] Bluetooth: ed04be78[    0.560550] cfg80211: Calling CRDA to update world regulatory domain
[    0.560587] cfg80211: World regulatory domain updated:
[    0.560597] cfg80211:  DFS Master region: unset
[    0.560606] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.560620] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560633] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560645] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560657] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560669] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560681] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560693] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.560705] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.560897] nfc: nfc_init: NFC Core ver 0.1
[    0.560968] NET: Registered protocol family 39
[    0.562534] Switched to clocksource arch_sys_counter
[    0.614228] NET: Registered protocol family 2
[    0.615048] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.615134] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.615243] TCP: Hash tables configured (established 8192 bind 8192)
[    0.615307] TCP: reno registered
[    0.615323] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.615367] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.615604] NET: Registered protocol family 1
[    0.616305] gcc-mdss-8909 soc:qcom,gcc-mdss@1ac8300: Registered GCC MDSS clocks.
[    0.617148] Trying to unpack rootfs image as initramfs...
[    0.670513] msm_thermal:do_freq_control Limiting CPU0 max frequency to 800000. Temp:65
[    0.670611] msm_thermal:do_freq_control Limiting CPU1 max frequency to 800000. Temp:65
[    0.670640] msm_thermal:do_freq_control Limiting CPU2 max frequency to 800000. Temp:65
[    0.670729] msm_thermal:do_freq_control Limiting CPU3 max frequency to 800000. Temp:65
[    0.696453] Freeing initrd memory: 1284K (c2000000 - c2141000)
[    0.699638] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.705565] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.705704] audit: initializing netlink subsys (disabled)
[    0.705794] audit: type=2000 audit(0.699:1): initialized
[    0.706818] vmscan: error setting kswapd cpu affinity mask
[    0.718953] fuse init (API version 7.23)
[    0.724122] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.724154] io scheduler noop registered
[    0.724176] io scheduler deadline registered
[    0.724400] io scheduler cfq registered (default)
[    0.730992] xlog_status: enable:1, panic:1, dump:2
[    0.734778] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    0.734843] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[    0.734924] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    0.734960] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[    0.737682] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    0.738092] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_rm67160_400p_cmd:1:none panel_name:qcom,mdss_dsi_rm67160_400p_cmd
[    0.738325] mdss_dsi_find_panel_of_node: invalid pan node "qcom,mdss_dsi_rm67160_400p_cmd"
[    0.738357] mdss_dsi_panel_init: Panel Name = EverDisplay rm67160 400p command mode dsi panel
[    0.738710] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_everdisp_rm67160_400p_cmd" (ed04b6d8)
[    0.738757] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    0.738780] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    0.739017] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
[    0.739041] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
[    0.739084] mdss_dsi_parse_panel_features: partial_update_enabled=0
[    0.739108] mdss_dsi_parse_panel_features: ulps feature disabled
[    0.739125] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    0.739143] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    0.739480] mdss_dsi_parse_ctrl_params:3875 Unable to read qcom,display-id, data=00000000,len=45
[    0.739617] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=f02ae780 phy_regulator_size=30
[    0.739636] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f02a6000 ctrl_size=25c phy_base=f02ac500 phy_size=280
[    0.740332] dsi_panel_device_register: Continuous splash enabled
[    0.740691] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi_ctrl0
[    0.748787] mdss_dsi_status_init: DSI status check interval:5000
[    0.750284] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[    0.751644] mdss_fb_register: FrameBuffer[0] 400x400 registered successfully!
[    0.751661] mdp3_ctrl_init: mdp3_ctrl_init
[    0.751878] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
[    0.756547] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    0.765939] In memshare_probe, Memshare probe success
[    0.769606] msm_rpm_log_probe: OK
[    0.800282] devfreq 1c00000.qcom,kgsl-3d0: Couldn't update frequency transition information.
[    0.811237] brd: module loaded
[    0.816146] loop: module loaded
[    0.816938] zram: Created 1 device(s) ...
[    0.817698] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
[    0.817763] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    0.817780] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[    0.817798] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[    0.818494] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
[    0.880633] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[    0.920815] nq-nci 2-0028: nfcc_hw_check: - nq - reset cmd answer : NfcNciRx 40 0 3
[    0.920945] nq-nci 2-0028: nqx_probe: probing NFCC NQxxx exited successfully
[    0.921674] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    0.922829] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
[    0.922856] qce 720000.qcedev: CE device = 0x0
[    0.922856] , IO base, CE = 0xf0640000
[    0.922856] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    0.922856] IO base BAM = 0x  (null)
[    0.922856] BAM IRQ 83
[    0.922856] Engines Availability = 0x2010853
[    0.923353] sps:BAM 0x00704000 is registered.
[    0.923903] sps:BAM 0x00704000 (va:0xf07c0000) enabled: ver:0x25, number of pipes:8
[    0.924885] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 83
[    0.929046] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    0.930037] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
[    0.930211] qcrypto 720000.qcrypto: CE device = 0x0
[    0.930211] , IO base, CE = 0xf0c40000
[    0.930211] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    0.930211] IO base BAM = 0x  (null)
[    0.930211] BAM IRQ 83
[    0.930211] Engines Availability = 0x2010853
[    0.931556] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 83
[    0.934367] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[    0.934602] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[    0.934810] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[    0.935017] qcrypto 720000.qcrypto: qcrypto-ecb-des
[    0.935228] qcrypto 720000.qcrypto: qcrypto-cbc-des
[    0.935465] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[    0.935637] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[    0.935824] qcrypto 720000.qcrypto: qcrypto-xts-aes
[    0.935993] qcrypto 720000.qcrypto: qcrypto-sha1
[    0.936171] qcrypto 720000.qcrypto: qcrypto-sha256
[    0.936340] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    0.936523] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    0.936695] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    0.936874] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    0.937045] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    0.937227] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    0.937397] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[    0.937585] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[    0.937758] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[    0.937947] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[    0.943435] tun: Universal TUN/TAP device driver, 1.6
[    0.943455] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.948276] PPP generic driver version 2.4.2
[    0.948490] PPP BSD Compression module registered
[    0.948514] PPP Deflate Compression module registered
[    0.948556] PPP MPPE Compression module registered
[    0.948590] NET: Registered protocol family 24
[    0.949824] wcnss_wlan probed in built-in mode
[    0.951686] usbcore: registered new interface driver asix
[    0.951817] usbcore: registered new interface driver ax88179_178a
[    0.951925] usbcore: registered new interface driver cdc_ether
[    0.952023] usbcore: registered new interface driver net1080
[    0.952133] usbcore: registered new interface driver cdc_subset
[    0.952231] usbcore: registered new interface driver zaurus
[    0.952635] usbcore: registered new interface driver cdc_ncm
[    0.953099] hyp_assign_table: Failed to assign memory protection, ret = -19
[    0.953120] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x87c00000 size=917504 err=-19
[    0.953402] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    0.953691] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[    0.953973] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[    0.954754] msm_otg 78d9000.usb: msm_otg probe
[    0.956653] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    0.959269] msm_otg 78d9000.usb: OTG regs = f02f8000
[    0.962536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.962565] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    0.963461] usbcore: registered new interface driver cdc_acm
[    0.963476] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.963709] usbcore: registered new interface driver usbserial
[    0.963810] usbcore: registered new interface driver usb_ehset_test
[    0.965209] gbridge_init: gbridge_init successs.
[    0.966822] mousedev: PS/2 mouse device common for all mice
[    0.967161] [elan] elan_ktf_ts_init driver version 0x0005: Integrated 2, 5, and 10 fingers together and auto-mapping resolution
[    0.967407] msm_otg 78d9000.usb: phy_reset: success
[    0.967810] [Stanley]elan_ktf_ts_probe called 
[    0.967825] [Stanley]elan_ktf_ts_probe: client->dev.of_node exists 
[    0.967838] [Stanley]elan_ktf_parse_dt called 
[    0.967877] [stanley]elan_ktf_parse_dt: reset gpio=12, flags=0 
[    0.967910] [stanley]elan_ktf_parse_dt: interrupt gpio=13, flags=0 
[    0.967923] [Stanley]elan_ktf_ts_probe: parse elan touch dt done 
[    0.967937] [Stanley]elan_ktf_ts_probe current MT protocol=A 
[    0.967952] [Stanley]elan_ktf_power_init 
[    0.968161] [Stanley]elan_ktf_power_on: on=1 
[    1.010143] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.060172] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.110199] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.160227] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.210253] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.260278] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.310303] [ektf]:__elan_ktf_ts_poll: status = 1
[    1.360328] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.360861] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
[    1.361894] [elan] __hello_packet_handler: hello packet 55:55:55:55:ff:ff:ff:ff
[    1.362433] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.363512] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.364587] [ektf]:[elan]__elan_ktf_ts_poll: poll interrupt status low
[    1.365150] [elan] __fw_packet_handler: Firmware version: 0xb013
[    1.365165] [elan] __fw_packet_handler: Firmware ID: 0x0f65
[    1.365177] [elan] __fw_packet_handler: Bootcode Version: 0x1000
[    1.365191] [elan] __fw_packet_handler: x resolution: 1024, y resolution: 1024
[    1.365581] input: elan-touchscreen as /devices/virtual/input/input1
[    1.366168] [ELAN] disable IRQ 107[ELAN] disable IRQ 107
[    1.366240] elan_ktf 5-0015: [elan] Start touchscreen elan-touchscreen in interrupt mode
[    1.366395] [elan]misc_register finished!!
[    1.366727] [Stanley]elan_ktf_ts_probe: INIT_DEFERRABLE_WORK 
[    1.366742] [Stanley]elan_ktf_ts_probe: INIT_DEFERRABLE_WORK
[    1.366779] [Stanley]elan_work: elan_work
[    1.366791] [Stanley]elan_work: case elan_work() 
[    1.366873] i2c-core: driver [elan_ktf] using legacy suspend method
[    1.366887] i2c-core: driver [elan_ktf] using legacy resume method
[    1.367542] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
[    1.367856] i2c /dev entries driver
[    1.376651] 
[    1.376651] 
[    1.376651] stc311x probe started
[    1.376651] 
[    1.376685] STC311x: stc3317_parse_dt: stc3317_parse_dt: stc3317_parse_dt()
[    1.376700] STC311x: stc3317_parse_dt: stc3317_parse_dt: Vmode=0
[    1.376714] STC311x: stc3317_parse_dt: stc3317_parse_dt: Alm_SOC=10
[    1.376729] STC311x: stc3317_parse_dt: stc3317_parse_dt: Alm_Vbat=3681
[    1.376743] STC311x: stc3317_parse_dt: stc3317_parse_dt: CC_cnf=89
[    1.376757] STC311x: stc3317_parse_dt: stc3317_parse_dt: VM_cnf=461
[    1.376772] STC311x: stc3317_parse_dt: stc3317_parse_dt: Rint=1037
[    1.376786] STC311x: stc3317_parse_dt: stc3317_parse_dt: Cnom=450
[    1.376801] STC311x: stc3317_parse_dt: stc3317_parse_dt: Rsense=10
[    1.376816] STC311x: stc3317_parse_dt: stc3317_parse_dt: RelaxCurrent=8
[    1.376830] STC311x: stc3317_parse_dt: stc3317_parse_dt: Adaptive=1
[    1.376847] STC311x: stc3317_parse_dt: stc3317_parse_dt: CapDerating[0]=0, [6]=900
[    1.376864] STC311x: stc3317_parse_dt: stc3317_parse_dt: OCVValue[0]=3300, [15]=4306
[    1.376880] STC311x: stc3317_parse_dt: stc3317_parse_dt: ForceExternalTemperature=0
[    1.376892] STC311x: stc3317_parse_dt: stc3317_parse_dt: end of dt parsing
[    1.377801] stc3117-204 4-0070: power supply register,0
[    1.377912] stc3117-204 4-0070: STC3117 Fuel-Gauge Ver 1.01a
[    1.378430] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
[    1.391664] STC311x: STC311x_SetParam: STC311x_SetParam: BattData.CurrentFactor=2408
[    1.666896] STC311x: stc311x_probe: stc3117-204 FG successfully probed
[    1.666977] i2c-core: driver [stc3117-204] using legacy suspend method
[    1.666991] i2c-core: driver [stc3117-204] using legacy resume method
[    1.667742] SMB348 smb348_charger_probe: smb348_charger_probe HW_ID: 5
[    1.668132] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x57 MSTR_STS:0x011363c8 OPER:0x00000010
[    1.692415] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.692948] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.694504] SMB348 smb348_get_prop_batt_temp: No bms power supply, report normal temp
[    1.708441] smb348-charger 4-0057: WPC status=0
[    1.708575] SMB348 smb348_charger_probe: detect_pin=1, stat_pin=0
[    1.708632] SMB348 smb348_charger_probe: Dock state is PRESENT
[    1.711951] smb348-charger 4-0057: SMB348 successfully probed. charger=0, batt=1
[    1.711969] SMB348 smb348_charger_probe: wpc detect value 2: 0
[    1.712430] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
[    1.713701] unable to find DT imem DLOAD mode node
[    1.714325] unable to find DT imem EDLOAD mode node
[    1.714885] unable to find DT imem dload-type node
[    1.715354] Failed to disable secure wdog debug: -4
[    1.717100] thermal thermal_zone2: failed to read out thermal zone 2
[    1.717595] thermal thermal_zone3: failed to read out thermal zone 3
[    1.718064] thermal thermal_zone4: failed to read out thermal zone 4
[    1.723034] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    1.723631] sdhci: Secure Digital Host Controller Interface driver
[    1.723645] sdhci: Copyright(c) Pierre Ossman
[    1.723666] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.724632] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    1.725143] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    1.730403] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    1.730428] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    1.731032] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    1.762568] tz_log 8600720.tz-log: Hyp log service is not supported
[    1.764895] usbcore: registered new interface driver usbhid
[    1.764911] usbhid: USB HID core driver
[    1.766163] ashmem: initialized
[    1.771014] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
[    1.771474] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    1.778146] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    1.779812] probe: Version mismatch expected 0x20000 got 0x0
[    1.803608] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
[    1.814048] u32 classifier
[    1.814067]     Actions configured
[    1.814134] Netfilter messages via NETLINK v0.30.
[    1.814237] nf_conntrack version 0.5.0 (9915 buckets, 39660 max)
[    1.815113] ctnetlink v0.93: registering with nfnetlink.
[    1.816370] xt_time: kernel timezone is -0000
[    1.816978] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.817307] arp_tables: (C) 2002 David S. Miller
[    1.817400] TCP: cubic registered
[    1.817419] Initializing XFRM netlink socket
[    1.818381] NET: Registered protocol family 10
[    1.820605] mip6: Mobile IPv6
[    1.820673] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.820958] sit: IPv6 over IPv4 tunneling driver
[    1.822014] NET: Registered protocol family 17
[    1.822075] NET: Registered protocol family 15
[    1.822292] Bluetooth: ed04be70
[    1.822325] Bluetooth: ed04be68Bluetooth: ed04be88
[    1.822427] Bluetooth: ed04be60Bluetooth: ed04be60
[    1.822464] Bluetooth: ed04be48Bluetooth: ed04bea0
[    1.822505] Bluetooth: ed04be88[    1.822567] l2tp_core: L2TP core driver, V2.0
[    1.822606] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.822627] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    1.822684] l2tp_netlink: L2TP netlink interface
[    1.822742] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    1.822792] l2tp_debugfs: L2TP debugfs support
[    1.822813] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    1.823933] NET: Registered protocol family 27
[    1.832800] CHG: qpnp_lbc_main_probe: Disabling Linear Charger (e-external-charger = 1)
[    1.837090] Registering SWP/SWPB emulation handler
[    1.837233] Creating CPU group 0
[    1.837247] Init CPU0 state
[    1.837258] Init CPU1 state
[    1.837269] Init CPU2 state
[    1.837279] Init CPU3 state
[    1.841545] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
[    1.902962] mmc0: Out-of-interrupt timeout is 50[ms]
[    1.902985] mmc0: BKOPS_EN equals 0x0
[    1.902998] mmc0: eMMC FW version: 0x02
[    1.903011] mmc0: cache barrier support 0 flush policy 0
[    1.917603] mmc0: new HS200 MMC card at address 0001
[    1.918392] mmcblk0: mmc0:0001 FJ27BA 3.64 GiB 
[    1.918643] mmcblk0boot0: mmc0:0001 FJ27BA partition 1 4.00 MiB
[    1.918872] mmcblk0boot1: mmc0:0001 FJ27BA partition 2 4.00 MiB
[    1.919089] mmcblk0rpmb: mmc0:0001 FJ27BA partition 3 512 KiB
[    1.921965]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
[    2.036300] file system registered
[    2.036467] mbim_init: initialize 1 instances
[    2.036612] mbim_init: Initialized 1 ports
[    2.039250] rndis_qc_init: initialize rndis QC instance
[    2.039835] Number of LUNs=8
[    2.039857] Mass Storage Function, version: 2009/09/11
[    2.039874] LUN: removable file: (no medium)
[    2.039905] Number of LUNs=1
[    2.040035] LUN: removable file: (no medium)
[    2.040210] Number of LUNs=1
[    2.040776] android_usb gadget: android_usb ready
[    2.040798] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
[    2.040833] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[    2.042372] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-10 20:19:43 UTC (850783)
[    2.044016] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[    2.044273] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[    2.044350] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[    2.044423] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[    2.046116] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[    2.051649] msm8952-asoc-wcd 7702000.sound: default codec configured
[    2.051971] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052026] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052395] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.052624] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.052672] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052721] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    2.052826] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052874] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052924] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.052974] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053025] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053076] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053128] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053180] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053232] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053286] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053339] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053392] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053500] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    2.053943] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[    2.054000] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[    2.054577] clock_late_init: Removing enables held for handed-off clocks
[    2.057596] mem_acc_corner: disabling
[    2.057624] ALSA device list:
[    2.057633]   No soundcards found.
[    2.057766] Warning: unable to open an initial console.
[    2.058482] Freeing unused kernel memory: 612K (c107c000 - c1115000)
[    2.061111] init: init first stage started!
[    2.135454] audit: type=1403 audit(850783.579:2): policy loaded auid=4294967295 ses=4294967295
[    2.136038] audit: type=1404 audit(850783.579:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.136798] init: (Initializing SELinux enforcing took 0.08s.)
[    2.145104] init: init second stage started!
[    2.162752] init: Running restorecon...
[    2.482485] init: waitpid failed: No child processes
[    2.483408] init: (Loading properties from /default.prop took 0.00s.)
[    2.487964] init: (Parsing /init.environ.rc took 0.00s.)
[    2.489178] init: (Parsing /init.usb.rc took 0.00s.)
[    2.493382] init: /init.dorado.rc: 530: user requires 1 argument
[    2.504531] SMB348 chg_uv: TYPE: USB
[    2.508249] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    2.508273] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[    2.509103] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    2.509129] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    2.509139] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    2.509153] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    2.509742] init: (Parsing init.qcom.usb.rc took 0.01s.)
[    2.510873] init: init.target.rc: 126: invalid keyword 'load_all_props'
[    2.511433] init: ignored duplicate definition of service 'dhcpcd_bt-pan'init: ignored duplicate definition of service 'iprenew_bt-pan'init: (Parsing init.target.rc took 0.00s.)
[    2.513490] init: (Parsing init.qcom.factory.rc took 0.00s.)
[    2.513533] init: (Parsing /init.dorado.rc took 0.02s.)
[    2.515595] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    2.515839] init: (Parsing /init.zygote32.rc took 0.00s.)
[    2.515879] init: (Parsing /init.rc took 0.03s.)
[    2.516830] init: Starting service 'ueventd'...
[    2.518673] init: Waiting for /dev/.coldboot_done...
[    2.521978] ueventd: ueventd started!
[    2.679451] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    2.679488] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    2.679498] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    2.679512] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    2.911104] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    2.911140] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    2.911151] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    2.911165] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    3.107870] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    3.107906] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    3.107916] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    3.107931] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    3.274476] ueventd: Coldboot took 0.75s.
[    3.278074] init: Waiting for /dev/.coldboot_done took 0.76s.
[    3.288768] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[    3.298369] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[    3.308825] fs_mgr: Failed to get verity metadata '/dev/block/platform/soc/7824900.sdhci/by-name/system' (Success)
[    3.308983] fs_mgr: Could not set up verified partition, skipping!
[    3.309715] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
[    3.345392] EXT4-fs (mmcblk0p33): warning: maximal mount count reached, running e2fsck is recommended
[    3.346517] EXT4-fs (mmcblk0p33): recovery complete
[    3.347496] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    3.347723] fs_mgr: check_fs(): mount(/dev/block/platform/soc/7824900.sdhci/by-name/userdata,/data,ext4)=0: Success
[    3.350760] fs_mgr: check_fs(): unmount(/data) succeeded
[    3.350854] fs_mgr: Not running /system/bin/e2fsck on /dev/block/platform/soc/7824900.sdhci/by-name/userdata (executable not in system image)
[    3.355182] EXT4-fs (mmcblk0p33): warning: maximal mount count reached, running e2fsck is recommended
[    3.355991] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
[    3.356158] fs_mgr: __mount(source=/dev/block/platform/soc/7824900.sdhci/by-name/userdata,target=/data,type=ext4)=0
[    3.372406] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
[    3.373099] EXT4-fs (mmcblk0p23): recovery complete
[    3.373932] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.386821] EXT4-fs (mmcblk0p22): recovery complete
[    3.387650] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.402514] init: do_start: Service logd not found
[    4.378275] init: (Loading properties from /system/build.prop took 0.00s.)
[    4.378349] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    4.378402] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    4.378689] init: /recovery not specified in fstab
[    4.379107] init: do_start: Service debuggerd not found
[    4.379149] init: do_start: Service debuggerd64 not found
[    4.379184] init: do_start: Service vold not found
[    4.381305] init: Not bootcharting.
[    4.464350] init: cannot find '/system/bin/tzdatacheck' (No such file or directory), disabling 'exec 1 (/system/bin/tzdatacheck)'
[    4.486002] init: cannot find '/system/vendor/bin/perfd' (No such file or directory), disabling 'perfd'
[    4.487931] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
[    4.493921] random: init urandom read with 90 bits of entropy available
[    4.561882] init: do_start: Service logd not found
[    4.561949] init: do_start: Service logd-reinit not found
[    4.562208] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    4.562246] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
[    4.562312] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[    4.562345] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
[    4.562406] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[    4.562440] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
[    4.562502] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[    4.562535] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
[    4.565599] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8cf00000
[    4.576976] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[    4.579282] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0xae800000 to 0xae900000
[    4.626488] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[    4.796701] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    4.796745] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    4.796759] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    4.796779] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    5.029642] SMB348 chg_uv: TYPE: USB
[    5.035088] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    5.035125] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    5.035136] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    5.035150] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    5.254286] SMB348 chg_uv: TYPE: USB
[    5.259436] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    5.259476] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    5.259490] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    5.259508] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    5.320259] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[    5.398627] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[    5.398645] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[    5.398847] M-Notify: General: 7
[    5.399331] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
[    5.399953] msm8952-asoc-wcd 7702000.sound: default codec configured
[    5.400935] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.401037] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.401579] init: cannot execve('/init.qcom.early_boot.sh'): No such file or directory
[    5.401597] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.401908] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.401979] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402044] msm8952_populate_dai_link_component_of_node: codec dai cajon_codec failed
[    5.402192] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402265] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402336] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402389] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 273) exited with status 127
[    5.402407] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402468] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402540] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402613] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402686] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402761] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402836] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402909] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.402985] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.403133] msm8952_populate_dai_link_component_of_node: codec dai msm-stub-codec.1 failed
[    5.403716] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[    5.403782] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[    5.408146] init: Starting service 'healthd'...
[    5.408973] init: cannot find '/system/bin/hwinfo' (No such file or directory), disabling 'hwinfo'
[    5.409060] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-debug'
[    5.409132] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-c_core-sh'
[    5.409194] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
[    5.409249] init: cannot find '/system/bin/tftp_server' (No such file or directory), disabling 'tftp_server'
[    5.409325] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'config_bluetooth'
[    5.409422] init: cannot find '/system/bin/qseecomd' (No such file or directory), disabling 'qseecomd'
[    5.409513] init: cannot find '/system/bin/pm-service' (No such file or directory), disabling 'per_mgr'
[    5.414172] binder: 275:275 transaction failed 29189, size 0-0
[    5.416370] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[    5.416449] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[    5.416519] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[    5.416587] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[    5.416656] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[    5.416725] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[    5.416793] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[    5.416859] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[    5.416926] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[    5.416991] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[    5.417059] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[    5.417125] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[    5.417191] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[    5.417258] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[    5.417325] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[    5.417391] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[    5.417457] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[    5.417524] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[    5.417591] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[    5.417659] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[    5.419570] init: cannot find '/system/bin/rmt_storage' (No such file or directory), disabling 'rmt_storage'
[    5.419638] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directory
[    5.421565] enable_store: android_usb: already disabled
[    5.422295] init: Starting service 'adbd'...
[    5.423305] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
[    5.423383] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
[    5.423428] init: cannot find '/system/bin/macgen' (No such file or directory), disabling 'wcn-mac'
[    5.423477] init: cannot find '/system/bin/macgen' (No such file or directory), disabling 'bt-mac'
[    5.423528] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-c_main-sh'
[    5.423572] init: cannot find '/system/bin/irsc_util' (No such file or directory), disabling 'irsc_util'
[    5.423658] init: cannot find '/system/bin/ptt_socket_app' (No such file or directory), disabling 'ptt_socket_app'
[    5.423702] init: cannot find '/system/bin/cnss_diag' (No such file or directory), disabling 'cnss_diag'
[    5.423765] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
[    5.423834] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'bms-sh'
[    5.423883] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-usb-sh'
[    5.423925] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
[    5.423966] init: cannot find '/system/vendor/bin/thermal-engine' (No such file or directory), disabling 'thermal-engine'
[    5.424007] init: cannot find '/system/bin/wcnss_service' (No such file or directory), disabling 'wcnss-service'
[    5.424047] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
[    5.424090] init: cannot find '/system/bin/ClockworkProxy' (No such file or directory), disabling 'clockwork_proxy'
[    5.424136] init: cannot find '/system/bin/app_process' (No such file or directory), disabling 'zygote'
[    5.424212] init: cannot find '/system/bin/cnd' (No such file or directory), disabling 'cnd'
[    5.424261] init: cannot find '/system/bin/dpmd' (No such file or directory), disabling 'dpmd'
[    5.424304] init: cannot find '/system/bin/cnss-daemon' (No such file or directory), disabling 'cnss-daemon'
[    5.424344] init: cannot find '/system/bin/loc_launcher' (No such file or directory), disabling 'loc_launcher'
[    5.424391] init: cannot find '/system/bin/sh' (No such file or directory), disabling 'qcom-sh'
[    5.424442] init: cannot find '/system/vendor/bin/RIDLClient.exe' (No such file or directory), disabling 'RIDL'
[    5.424484] init: cannot find '/system/bin/time_daemon' (No such file or directory), disabling 'time_daemon'
[    5.424525] init: cannot find '/system/bin/audiod' (No such file or directory), disabling 'audiod'
[    5.499011] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    5.499056] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    5.499070] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    5.499090] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    5.928031] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    5.928072] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    5.928087] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    5.928106] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    6.268763] SMB348 chg_uv: TYPE: USB
[    6.271674] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    6.271711] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    6.271725] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    6.271745] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    6.611295] SMB348 chg_uv: TYPE: USB
[    6.614281] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    6.614316] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    6.614330] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    6.614348] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    6.981189] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[    6.981226] SMB348 smb348_get_prop_batt_temp: *** Temp close cold point, but didn't receive batt cold irq ***
[    6.981240] SMB348 smb348_get_prop_batt_temp: *** Keep current temp(0) to 2
[    6.981259] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[    8.173427] SMB348 smb348_wpc_dock_handler: wpc detect pin changed!! chg_end=0 state=0 enable=0, detect=0
[    8.173487] SMB348 smb348_wpc_dock_work: current dock state = 1, chip->wpc_dock_present = 0
[    8.173571] SMB348 smb348_wpc_dock_work: Dock state changed - REMOVED
[   12.669085] SMB348 smb348_wpc_dock_handler: wpc detect pin changed!! chg_end=0 state=0 enable=0, detect=1
[   12.669141] SMB348 smb348_wpc_dock_work: current dock state = 0, chip->wpc_dock_present = 1
[   12.669239] SMB348 smb348_wpc_dock_work: Dock state changed - PRESENT
[   12.760390] SMB348 chg_uv: TYPE: USB
[   12.765180] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[   12.765226] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[   12.935046] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[   12.935088] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[   13.101664] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[   13.135835] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler ebfd3c00 is not open
[   13.135938] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler ebfd3c00 is not open[   13.363485] SMB348 smb348_get_prop_batt_capacity: soc=14, chg_end=0, chg_full_flag=0, recharge_flag=0
[   13.363530] SMB348 smb348_get_prop_battery_voltage_now: chg_end=0, chg_full_flag=0
[   15.482828] SysRq : Emergency Remount R/O
[   15.587464] reboot: Restarting system with command 'recovery'
[   15.587492] Going down for restart now
[   15.588280] Failed to disable secure wdog debug: -4
[   15.588305] Calling SCM to disable SPMI PMIC arbiter