Skip to content

Instantly share code, notes, and snippets.

@dch dch/ddb.conf
Last active Jun 26, 2018

Embed
What would you like to do?
wintermute config files & dmesg @ r335576+8a125fa67c5d
# ansible_managed
hostname="wintermute.skunkwerks.at"
# kernel
kld_list="linux64 fuse nvidia-modeset ipmi smb ichsmb dtraceall cc_htcp filemon cuse"
update_motd=YES
# daemons
zfs_enable="YES"
syslogd_flags="-ss"
sendmail_enable="NONE"
local_unbound_enable="NO"
# network
gateway_enable=YES #for ipv4
ipv6_gateway_enable=YES #for ipv6
ifconfig_igb0="DHCP"
ifconfig_igb0_ipv6="inet6 accept_rtadv"
ifconfig_ue0="DHCP"
ifconfig_ue0_ipv6="inet6 accept_rtadv"
# ifconfig_igb1="inet 192.168.0.0/16"
# ifconfig_igb1_ipv6="inet6 accept_rtadv"
# wifi
# wlans_rtwn0="wlan0"
# wlans_iwm0="wlan0"
# ifconfig_wlan0="WPA DHCP"
# ifconfig_wlan0_ipv6="inet6 accept_rtadv"
# create_args_wlan0="country AT regdomain ETSI"
# debugging rc.d scripts
#rc_debug=YES
#rc_startmsgs=YES
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev=AUTO
ddb_enable=YES
dumpon="-v"
panicmail_enable=YES
panicmail_autosubmit=YES
savecore_enable=YES
smartd_enable=YES
h2o_enable=YES
# nfs
#mountd_enable=YES
#mountd_flags="-n -r"
#portmap_enable=YES
#rpcbind_enable=YES
#rpc_lockd_enable=YES
#rpc_statd_enable=YES
jail_enable=YES
# BEGIN ANSIBLE MANAGED BLOCK
# jail networks
cloned_interfaces="${cloned_interfaces} lo1"
ifconfig_lo1="inet 10.241.0.0/16"
ifconfig_lo1_aliases="inet 10.241.0.0-15/16"
# misc tweaks
ip6addrctl_policy="ipv4_prefer"
clear_tmp_enable=YES
# END ANSIBLE MANAGED BLOCK
# local jail networks
# cloned_interfaces="${cloned_interfaces} lo2"
# ifconfig_lo2_aliases="inet6 fcf9:b70a:3e2:8e50:6c98:cafe:1-15/80"
# misc tweaks
# iohyve
# iovhye_enable=YES
# iohyve_flags="kmod=1 net=igb0"
jail_fqdn="wintermute.skunkwerks.at"
devfs_system_ruleset="system"
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT r335576+8a125fa67c5d(master) amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1280x1024
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (3200.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 133677522944 (127484 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
Launching APs: 1 8 5 2 10 14 3 4 15 11 7 12 13 9 6
Timecounter "TSC-low" frequency 1600033102 Hz quality 1000
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff810ee680, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
Firmware Error (ACPI): Failure creating [\134_SB.NITL], AE_ALREADY_EXISTS (20180531/dswload2-468)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-372)
ACPI Error: Ignore error and continue table load (20180531/psobject-776)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP00._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP00._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP01._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP01._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP02._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP02._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP03._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP03._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP04._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP04._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP05._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP05._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP06._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP06._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP07._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP07._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP08._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP08._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP09._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP09._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0A._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0A._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0B._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0B._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0C._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0C._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0D._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0D._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0E._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0E._PDC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0F._OSC, AE_NOT_FOUND (20180531/psparse-677)
Firmware Error (ACPI): Could not resolve [\134_SB.OSC.ITMB], AE_NOT_FOUND (20180531/psargs-503)
ACPI Error: Method parse/execution failed \134_SB.OSC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PDC, AE_NOT_FOUND (20180531/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.SCK0.CP0F._PDC, AE_NOT_FOUND (20180531/psparse-677)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
nvme0: <Generic NVMe Device> mem 0xfb520000-0xfb523fff irq 26 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci1
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 40 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fb9) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 on pci3
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb61c000-0xfb61c7ff irq 16 at device 17.4 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb600000-0xfb60ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb618000-0xfb6183ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb610000-0xfb613fff irq 22 at device 27.0 on pci1
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci4: <ACPI PCI bus> on pcib4
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb400000-0xfb407fff irq 16 at device 0.0 on pci4
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci1
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xfb300000-0xfb37ffff,0xfb380000-0xfb383fff irq 18 at device 0.0 on pci5
igb0: attach_pre capping queues at 4
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 4
igb0: pxm cpus: 8 queue msgs: 4 admincnt: 1
igb0: using 4 rx queues 4 tx queues
igb0: Using MSIX interrupts with 5 vectors
igb0: allocated for 4 tx_queues
igb0: allocated for 4 rx_queues
igb0: Ethernet address: ac:1f:6b:15:2d:78
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci1
pci6: <ACPI PCI bus> on pcib6
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xfb200000-0xfb27ffff,0xfb280000-0xfb283fff irq 19 at device 0.0 on pci6
igb1: attach_pre capping queues at 4
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 4
igb1: pxm cpus: 8 queue msgs: 4 admincnt: 1
igb1: using 4 rx queues 4 tx queues
igb1: Using MSIX interrupts with 5 vectors
igb1: allocated for 4 tx_queues
igb1: allocated for 4 rx_queues
igb1: Ethernet address: ac:1f:6b:15:2d:79
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1
pci7: <ACPI PCI bus> on pcib7
xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 16 at device 0.0 on pci7
xhci2: 32 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table
usbus3 on xhci2
usbus3: 5.0Gbps Super Speed USB v3.0
pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci1
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
vgapci1: <VGA-compatible display> port 0xb000-0xb07f mem 0xf8000000-0xf8ffffff,0xf9000000-0xf901ffff irq 18 at device 0.0 on pci9
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci1
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib11
pcib12: <PCI-PCI bridge> irq 18 at device 3.0 on pci11
pci12: <PCI bus> on pcib12
pcib13: <PCI-PCI bridge> irq 18 at device 7.0 on pci11
pci13: <PCI bus> on pcib13
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb617000-0xfb6173ff irq 18 at device 29.0 on pci1
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb616000-0xfb6167ff irq 16 at device 31.2 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen3.1: <0x1b21 XHCI root HUB> at usbus3
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <0x1b21 XHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <PLEXTOR PX-1TM8PeY> NVMe namespace
nvd0: 976762MB (2000409264 512 byte sectors)
hdacc0: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm4: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich6 bus 0 scbus7 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-224GB SB00> Removable CD-ROM SCSI device
cd0: Serial Number S1DK6YAH4008DR
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
ada0: <HGST HUS726040ALN610 APGNT907> ACS-2 ATA SATA 3.x device
ada0: Serial Number N8H2KZPZ
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (976754646 4096 byte sectors)
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <HGST HUS726040ALN610 APGNT907> ACS-2 ATA SATA 3.x device
ada1: Serial Number N8H2W67Z
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (976754646 4096 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:envy/ROOT/12.0-CURRENT-20180623.031711 []...
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus4 usbus3 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen3.2: <Razer Razer DeathAdder> at usbus3
uhub4: 21 ports with 21 removable, self powered
ugen0.2: <USB Device USB 2.0 Hub> at usbus0
uhub5 on uhub4
uhub5: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 1> on usbus0
ugen4.2: <vendor 0x8087 product 0x8002> at usbus4
uhub6 on uhub0
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus4
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub7 on uhub1
uhub7: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
Root mount waiting for: usbus4 usbus1 usbus0
uhub7: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen0.3: <Chord Electronics Ltd Mojo> at usbus0
uaudio0 on uhub5
uaudio0: <Chord Electronics Ltd Mojo, class 239/2, rev 2.00/1.97, addr 2> on usbus0
uaudio0: Play: 384000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 352800 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 192000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 176400 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 96000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 88200 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 48000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 44100 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 32000 Hz, 2 ch, 32-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm6: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
Root mount waiting for: usbus0
ugen0.4: <vendor 0x04d9 USB Keyboard> at usbus0
ukbd0 on uhub4
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/12.09, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <Plantronics Plantronics Headset> at usbus0
uaudio1 on uhub4
uaudio1: <Plantronics Plantronics Headset, class 0/0, rev 1.10/0.04, addr 4> on usbus0
uaudio1: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 40000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Play: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 40000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: Record: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio1: No MIDI sequencer.
pcm7: <USB audio> on uaudio1
uaudio1: HID volume keys found.
ugen0.6: <vendor 0x0557 product 0x7000> at usbus0
uhub8 on uhub4
uhub8: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 5> on usbus0
Root mount waiting for: usbus0
uhub8: 4 ports with 3 removable, self powered
ugen0.7: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 on uhub8
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 6> on usbus0
kbd3 at ukbd1
[11] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchain, error=63)
[12] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013, error=63)
[12] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-tools, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:pre-pip-sphinxp3, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-docs-buildchainp3, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1031:post-firstbootp3, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-2224:post-visualstudio2013p3, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1548:with-couch-toolsp3, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp1, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp2, error=63)
[14] g_dev_taste: make_dev_p() failed (gp->name=zvol/embiggen/virt/win7uefi_disk0@20171103-1352:with-chocolateyp3, error=63)
[22] nvidia0: <GeForce GTX 1050 Ti> on vgapci0
[22] vgapci0: child nvidia0 requested pci_enable_io
[22] vgapci0: child nvidia0 requested pci_enable_io
[22] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.59 Wed May 9 21:54:48 PDT 2018
[22] acquiring duplicate lock of same type: "os.lock_sx"
[22] 1st os.lock_sx @ nvidia_os.c:651
[22] 2nd os.lock_sx @ nvidia_os.c:651
[22] stack backtrace:
[22] #0 0xffffffff80bfb893 at witness_debugger+0x73
[22] #1 0xffffffff80bfb714 at witness_checkorder+0xe34
[22] #2 0xffffffff80b9a748 at _sx_xlock+0x68
[22] #3 0xffffffff83eced02 at os_acquire_mutex+0x32
[22] #4 0xffffffff83dca3a6 at _nv032841rm+0x16
[23] ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
[23] ipmi0: KCS mode found at io 0xca2 on acpi
[23] ipmi0: IPMI device rev. 1, firmware rev. 3.45, version 2.0, device support mask 0xbf
[23] ipmi0: Number of channels 2
[23] ipmi0: Attached watchdog
[23] ipmi0: Establishing power cycle handler
[26] ichsmb0: <Intel Wellsburg SMBus controller> port 0x580-0x59f mem 0xfb615000-0xfb6150ff irq 18 at device 31.3 on pci1
[26] smbus0: <System Management Bus> on ichsmb0
[26] smb0: <SMBus generic I/O> on smbus0
[26] Cuse v0.1.35 @ /dev/cuse
[27] lo0: link state changed to UP
[27] lo1: link state changed to UP
[30] ums0 on uhub3
[30] ums0: <Razer Razer DeathAdder, class 0/0, rev 2.00/1.00, addr 1> on usbus3
[30] ums0: 7 buttons and [XYZ] coordinates ID=0
[30] uhid0 on uhub4
[30] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/12.09, addr 3> on usbus0
[30] ums1 on uhub8
[30] ums1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 6> on usbus0
[30] ums1: 3 buttons and [Z] coordinates ID=0
[30] pflog0: promiscuous mode enabled
[31] Link state changed to up
[31] igb0: link state changed to UP
[33] CPU: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (3200.07-MHz K8-class CPU)
[33] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
[33] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[33] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[33] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[33] AMD Features2=0x121<LAHF,ABM,Prefetch>
[33] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
[33] XSAVE Features=0x1<XSAVEOPT>
[33] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[33] TSC: P-state invariant, performance statistics
sudo sysctl hw.model hw.ncpu hw.acpi.cpu hw.vmm dev.cpu.0
hw.model: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz
hw.ncpu: 16
hw.acpi.cpu.cx_lowest: C1
hw.vmm.amdvi.domain_id: 0
hw.vmm.amdvi.disable_io_fault: 0
hw.vmm.amdvi.ptp_level: 4
hw.vmm.amdvi.host_ptp: 1
hw.vmm.amdvi.enable: 0
hw.vmm.amdvi.count: 0
hw.vmm.npt.pmap_flags: 0
hw.vmm.svm.num_asids: 0
hw.vmm.svm.disable_npf_assist: 0
hw.vmm.svm.features: 4294967295
hw.vmm.svm.vmcb_clean: 1023
hw.vmm.vmx.vpid_alloc_failed: 0
hw.vmm.vmx.posted_interrupt_vector: 252
hw.vmm.vmx.cap.posted_interrupts: 1
hw.vmm.vmx.cap.virtual_interrupt_delivery: 1
hw.vmm.vmx.cap.invpcid: 1
hw.vmm.vmx.cap.monitor_trap: 1
hw.vmm.vmx.cap.unrestricted_guest: 1
hw.vmm.vmx.cap.pause_exit: 1
hw.vmm.vmx.cap.halt_exit: 1
hw.vmm.vmx.initialized: 1
hw.vmm.vmx.cr4_zeros_mask: 18446744073705920512
hw.vmm.vmx.cr4_ones_mask: 8192
hw.vmm.vmx.cr0_zeros_mask: 18446744071025197056
hw.vmm.vmx.cr0_ones_mask: 32
hw.vmm.vmx.no_flush_rsb: 0
hw.vmm.ept.pmap_flags: 1531
hw.vmm.vrtc.flag_broken_time: 1
hw.vmm.ppt.devices: 0
hw.vmm.iommu.enable: 1
hw.vmm.iommu.initialized: 0
hw.vmm.bhyve_xcpuids: 0
hw.vmm.topology.cpuid_leaf_b: 1
hw.vmm.create: beavis
hw.vmm.destroy: beavis
hw.vmm.trace_guest_exceptions: 0
hw.vmm.ipinum: 251
hw.vmm.halt_detection: 1
dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc/bma
dev.cpu.0.cx_usage_counters: 401406 0
dev.cpu.0.cx_usage: 100.00% 0.00% last 1045us
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_supported: C1/1/1 C2/2/41
dev.cpu.0.freq_levels: 3201/135000 3200/135000 3100/128128 2900/117391 2800/112170 2600/102018 2500/97087 2300/86296 2200/81662 2100/77122 1900/68315 1800/64049 1600/55784 1500/50680 1300/42969 1200/39241
dev.cpu.0.freq: 3200
dev.cpu.0.temperature: 34.0C
dev.cpu.0.coretemp.throttle_log: 0
dev.cpu.0.coretemp.tjmax: 102.0C
dev.cpu.0.coretemp.resolution: 1
dev.cpu.0.coretemp.delta: 68
dev.cpu.0.%parent: acpi0
dev.cpu.0.%pnpinfo: _HID=ACPI0007 _UID=0
dev.cpu.0.%location: handle=\_SB_.SCK0.CP00 _PXM=0
dev.cpu.0.%driver: cpu
dev.cpu.0.%desc: ACPI CPU
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e501bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:15:2d:78
inet6 fe80::ae1f:6bff:fe15:2d78%igb0 prefixlen 64 scopeid 0x1
inet 172.16.1.14 netmask 0xffffff00 broadcast 172.16.1.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:15:2d:79
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 10.241.0.0 netmask 0xffff0000
inet 10.241.0.1 netmask 0xffffffff
inet 10.241.0.2 netmask 0xffffffff
inet 10.241.0.3 netmask 0xffffffff
inet 10.241.0.4 netmask 0xffffffff
inet 10.241.0.5 netmask 0xffffffff
inet 10.241.0.6 netmask 0xffffffff
inet 10.241.0.7 netmask 0xffffffff
inet 10.241.0.8 netmask 0xffffffff
inet 10.241.0.9 netmask 0xffffffff
inet 10.241.0.10 netmask 0xffffffff
inet 10.241.0.11 netmask 0xffffffff
inet 10.241.0.12 netmask 0xffffffff
inet 10.241.0.13 netmask 0xffffffff
inet 10.241.0.14 netmask 0xffffffff
inet 10.241.0.15 netmask 0xffffffff
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
groups: lo
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33160
groups: pflog
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: vm-public
ether 02:37:62:ce:b3:00
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 0 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 0 ifcost 0 port 0
member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
# ensure only gpt labelled devices are used
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zfs_load="YES"
# https://www.freebsd.org/security/advisories/FreeBSD-SA-18%3A03.speculative_execution.asc
# meltdown
vm.pmap.pti=1
# spectre v2 - requires microcode update
# check with hw.ibrs_active at runtime
hw.ibrs_disable=0
# serial over ipmi
#boot_multicons="YES"
#boot_serial="YES"
#console="comconsole,efi"
#comconsole_port="0x248"
#hint.uart.0.flags="0x00"
#hint.uart.2.flags="0x10"
# boot_verbose="YES"
# nextbsd graphics debugging
debug.debugger_on_panic=1
#dev.drm.skip_ddb=1
# dev.drm.drm_debug_persist=1
# set this at runtime after switching to X
# dev.drm.drm_debug=-1
# nvidia graphics
# nvidia-modeset_load="YES"
# kernel tweaks
kern.ipc.shmseg=1024
kern.ipc.shmni=1024
kern.maxproc=10000
# storage bits
mmc_load="YES"
mmcsd_load="YES"
sdhci_load="YES"
fuse_load="YES"
# hw
coretemp_load="YES"
# filesystems
tmpfs_load="YES"
aio_load="YES"
# unicode
libiconv_load="YES"
libmchain_load="YES"
cd9660_iconv_load="YES"
msdosfs_iconv_load="YES"
# console
kern.vty=vt
hw.vga.textmode=1
# sound
# all loaded by default on amd64
# snd_hda_load="YES"
# legal.realtek.license_ack=1
snd_uaudio_load="YES"
# chromium
kern.ipc.shm_allow_removed=1
# cpu/gpu power tuning
drm.i915.enable_rc6=7
# kern.hz=100
debug.cpufreq.lowest=600
hint.p4tcc.0.disabled="1"
hint.acpi_throttle.0.disabled="1"
# bhyve
vmm_load="YES"
nmdm_load="YES"
if_tap_load="YES"
kern.racct.enable=1
# fool windows VMs into seeing cpus as cores
hw.vmm.topology.cores_per_package=4
BATCH=yes
DEVELOPER=yes
PROXYDEPS_FATAL=yes
KEEP_OLD_PACKAGES=yes
USE_TMPFS=all
TMPFS_LIMIT=2
WRKDIRPREFIX=/tmp
CCACHE_DIR=/var/cache/ccache
# Erlang/OTP with DTrace
STRIP=
WITH_CTF=1
CFLAGS+=-fno-omit-frame-pointer
# OpenSSL avoidance
# DEFAULT_VERSIONS+=ssl=libressl
# OPTIONS_UNSET= GSSAPI_BASE
# OPTIONS_SET= GSSAPI_MIT
# enable our custom ports category
VALID_CATEGORIES+=koan-ci
LICENSES_ACCEPTED+=MIT BSD3CLAUSE APACHE20 LGPLV3 BSD2CLAUSE MPL MPL20 NONE
# Enable Tahoma in x11-fonts/webfonts if you have a Windows license
.if ${.CURDIR:M*/x11-fonts/webfonts}
WITH_MSWINDOWS_LICENSE=yes
.endif
# /etc/pf.conf
# macros
protocols = "{ tcp, udp }"
blocked_ports = "{ syslog, epmd, amqp, couchdb }"
tcp_services = "{ domain, http, https, smtp, 2200, couchdb, amqp, 1978, 3389, 6600, 9000 }"
udp_services = "{ domain, 9993, 10001, 21027, 3478 }"
plex_ports = "{ 32400, 1900, 3005, 5353, 8324, 32469, 32410, 32412, 32413, 32414 }"
koan_services = "{ https, amqp, 1999 }"
martians = "{ 127.0.0.0/8, 192.168.0.0/16, \
10.0.0.0/8, 169.254.0.0/16, 192.0.2.0/24, \
0.0.0.0/8, 240.0.0.0/4 }"
dhcp = "{ bootpc, bootps }"
# interfaces
extl_if = "igb0"
intl_if = "lo0"
jail_if = "lo1"
hive_if = "tap0"
zero_if = "zt1flo98dm17np8"
iwmn_if = "zt1flo98dm0peka"
bridge = "{ tap0, igb0 }"
# networks
internet = $extl_if:network
intl_net = $intl_if:network
jail_net = $jail_if:network
hive_net = $hive_if:network
#zero_net = $zero_if:network
#iwmn_net = $iwmn_if:network
zero_net = "{ 10.144.0.0/16, fc36:c375:a2e2::/40 }"
iwmn_net = "10.244.0.0/16"
local_net= "172.16.0.0/16"
# limits
# bigger state tables help erlang receive sockets faster
# https://blog.tyk.nu/blog/fun-with-freebsd-listen-queue-overflow/
set limit { states 200000, frags 40000, src-nodes 40000 }
set timeout { adaptive.start 180000, adaptive.end 200000 }
# trusted nets and devices
set skip on { $intl_if, $jail_if, $hive_if }
set skip on { $zero_if, $iwmn_if }
# tables
table <badhosts> persist file "/etc/pf.blocklist"
# clean packets are happy packets
scrub in all
# jails are allowed outbound connections but not inbound
# these should be set up explicitly using spiped or similar
nat on $extl_if proto $protocols from $jail_net to any -> ($extl_if:0)
nat on $extl_if proto $protocols from $zero_net to any -> ($extl_if:0)
nat on $extl_if proto $protocols from $iwmn_net to any -> ($extl_if:0)
# block by default
block in log all
# plex https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall-
# but allow legit internal traffic
pass in quick on $extl_if proto { udp } from any to $extl_if port $udp_services
pass in quick on $extl_if proto { tcp } from any to $extl_if port $tcp_services
pass in quick on $extl_if proto { tcp } from any to $extl_if port $koan_services
pass in quick on $extl_if from $local_net to $extl_if
pass in quick on $extl_if proto { udp, tcp } from $local_net to any port $plex_ports
pass in quick on $extl_if proto { udp, tcp } from $local_net to any port $udp_services
# dhcp for bridged bhyve instances
pass in quick on $bridge proto udp from any port $dhcp to any port $dhcp
pass out quick on $bridge proto udp from any port $dhcp to any port $dhcp
# you shall not pass
block drop in quick on $extl_if from $martians to any
block drop out quick on $extl_if from any to $martians
block drop in quick on $extl_if proto { udp, tcp } from any to any port $blocked_ports
# handle script kiddies and other nasties on demand
block drop in quick on $extl_if from <badhosts> to any
# o ye of little faith
# pass in log all
# bhyve gets everything
# pass in quick on $extl_if from any to $hive_if
pass out all
# ansible_managed
hostname="wintermute.skunkwerks.at"
# kernel
kld_list="linux64 fuse nvidia-modeset ipmi smb ichsmb dtraceall cc_htcp filemon cuse"
update_motd=YES
# daemons
zfs_enable="YES"
sendmail_enable="NONE"
local_unbound_enable="NO"
# network
gateway_enable=YES #for ipv4
ipv6_gateway_enable=YES #for ipv6
ifconfig_igb0="DHCP"
ifconfig_igb0_ipv6="inet6 accept_rtadv"
ifconfig_ue0="DHCP"
ifconfig_ue0_ipv6="inet6 accept_rtadv"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev=AUTO
ddb_enable=YES
dumpon="-v"
panicmail_enable=YES
panicmail_autosubmit=YES
savecore_enable=YES
smartd_enable=YES
h2o_enable=YES
# nfs
jail_enable=YES
# BEGIN ANSIBLE MANAGED BLOCK
# jail networks
cloned_interfaces="${cloned_interfaces} lo1"
ifconfig_lo1="inet 10.241.0.0/16"
ifconfig_lo1_aliases="inet 10.241.0.0-15/16"
# misc tweaks
ip6addrctl_policy="ipv4_prefer"
clear_tmp_enable=YES
# END ANSIBLE MANAGED BLOCK
devfs_system_ruleset="system"
WITH_META_MODE=yes
WITH_CCACHE_BUILD=yes
WITHOUT_LIB32=yes
WITH_REPRODUCIBLE_BUILD=yes
WITH_BSD_GREP=yes
WITH_LOADER_LUA=yes
WITHOUT_FORTH=yes
WITHOUT_DEBUG_FILES=yes
WITHOUT_FLOPPY=yes
WITHOUT_FINGER=yes
#WITHOUT_FTP=yes
WITHOUT_GAMES=yes
WITHOUT_HAST=yes
WITHOUT_HYPERV=yes
#WITHOUT_IPFILTER=yes
#WITHOUT_IPFW=yes
WITHOUT_SENDMAIL=yes
WITHOUT_PORTSNAP=yes
WITHOUT_RBOOTD=yes
WITHOUT_RCMDs=yes
WITHOUT_TALK=yes
WITHOUT_TELNET=yes
WITHOUT_TIMED=yes
WITHOUT_VI=yes
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.