dmesg.log

 d@~ sudo dmesg
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r312610+a86fc4452d69(drm-next): Sun Jan 29 23:26:34 UTC 2017
    root@akai:/usr/obj/usr/src/sys/GENERIC amd64
clang version 3.9.0 (tags/RELEASE_390/final)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 2880x1800
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM) i7-4770HQ CPU @ 2.20GHz (2194.96-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40661  Family=0x6  Model=0x46  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16415330304 (15654 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <APPLE  Apple00>
unexpected cache level 3
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/0 (20170119/tbfadt-640)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1097480097 Hz quality 1000
random: entropy device external interface
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ec7580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd0 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pcib4: [GIANT-LOCKED]
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib6: [GIANT-LOCKED]
pci6: <ACPI PCI bus> on pcib6
bge0: <Thunderbolt Ethernet, ASIC rev. 0x57766000> mem 0xacc00000-0xacc0ffff,0xacc10000-0xacc1ffff at device 0.0 on pci6
bge0: CHIP ID 0x57766000; ASIC REV 0x57766; CHIP REV 0x577660; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: ac:87:a3:27:f5:44
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pcib7: [GIANT-LOCKED]
pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci2
pcib8: [GIANT-LOCKED]
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pcib9: [GIANT-LOCKED]
vgapci0: <VGA-compatible display> port 0x1000-0x103f mem 0xa0000000-0xa03fffff,0x90000000-0x9fffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xa0a10000-0xa0a13fff at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xa0a00000-0xa0a0ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point HDA Controller> mem 0xa0a14000-0xa0a17fff at device 27.0 on pci0
pcib10: <PCI-PCI bridge> at device 28.0 on pci0
pcib10: [GIANT-LOCKED]
pcib11: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci7: <ACPI PCI bus> on pcib11
pci7: <network> at device 0.0 (no driver attached)
pcib12: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib12
pci8: <multimedia> at device 0.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci9: <ACPI PCI bus> on pcib13
ahci0: <AHCI SATA controller> mem 0xa0700000-0xa0701fff at device 0.0 on pci9
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
hdacc1: ada0: <APPLE SSD SM0256G BXW2SA0Q> ATA8-ACS SATA 3.x device
ada0: Serial Number S2HLNYAH203128
ada0: 600.000MB/s transfers<Cirrus Logic (0x4208) HDA CODEC> (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 239372MB (490234752 512 byte sectors)
 at cad 0 on hdac1
g_dev_taste: make_dev_p() failed (gp->name=gpt//, error=22)
hdaa1: <Cirrus Logic (0x4208) Audio Function Group> at nid 1 on hdacc1
pcm1: <Cirrus Logic (0x4208) (Analog 4.0/2.0)> at nid 18,19 and 24 on hdaa1
pcm2: <Cirrus Logic (0x4208) (Analog Headphones)> at nid 16 on hdaa1
pcm3: <Cirrus Logic (0x4208) (Digital)> at nid 33 on hdaa1
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/12.0-CURRENT []...
Root mount waiting for: usbus0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus0
uhub0: 21 ports with 21 removable, self powered
ugen0.2: <Apple Inc. BRCM20702 Hub> at usbus0
uhub1 on uhub0
uhub1: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus0
uhub1: 3 ports with 0 removable, self powered
ugen0.3: <vendor 0x05ac product 0x820a> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 2> on usbus0
kbd1 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x05ac product 0x820b> at usbus0
Root mount waiting for: usbus0
ugen0.5: <Apple Inc. Bluetooth USB Host Controller> at usbus0
ugen0.6: <Apple Inc. Apple Internal Keyboard  Trackpad> at usbus0
ukbd1 on uhub0
ukbd1: <Apple Internal Keyboard> on usbus0
kbd2 at ukbd1
Root mount waiting for: usbus0
ugen0.7: <Apple Card Reader> at usbus0
umass0 on uhub0
umass0: <Apple Card Reader, class 0/0, rev 3.00/8.20, addr 6> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:1:0: Attached to scbus1
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <APPLE SD Card Reader 3.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000000820
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
atp0 on uhub0
atp0: <Touchpad> on usbus0
bge0: link state changed to DOWN
ums0 on uhub1
ums0: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 3> on usbus0
ums0: 3 buttons and [XY] coordinates ID=2
ums1 on uhub0
ums1: <Touchpad> on usbus0
ums1: 3 buttons and [XY] coordinates ID=2
ubt0 on uhub1
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/1.12, addr 4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ugen0.3: <vendor 0x05ac product 0x820a> at usbus0 (disconnected)
ukbd0: at uhub1, port 1, addr 2 (disconnected)
ukbd0: detached
ugen0.4: <vendor 0x05ac product 0x820b> at usbus0 (disconnected)
ums0: at uhub1, port 2, addr 3 (disconnected)
ums0: detached
bge0: link state changed to UP
ifa_maintain_loopback_route: deletion failed for interface lo0: 48
bge0: link state changed to DOWN
bge0: link state changed to UP
ugen0.3: <vendor 0x7392 product 0x7811> at usbus0
rtwn0 on uhub0
rtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 7> on usbus0
rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
wlan0: Ethernet address: 74:da:38:7e:e6:e0
swap_pager: out of swap space
swap_pager_getswapspace(16): failed
pid 62971 (ifconfig), uid 0, was killed: out of swap space
pid 57669 (unbound), uid 59, was killed: out of swap space