quick settings thanks to paul daniels

quick settings.txt

quick settings thanks to paul daniels - available at https://www.youtube.com/watch?v=IrvnWPoGU5s


quick settings
=============================
thanks to paul daniels

https://www.youtube.com/watch?v=IrvnWPoGU5s


bga removal from mainboard
=============================
460c temp
110 litres/min
9mm nozzle


bga on its own
=============================
wick removing old solder
420c temp
60 litres/min
9mm nozzle

mix regular thick paste with IPA, to make a
  'genuinely wet wet baste'
cheap iphone stencil with square holes

reballing, melting paste

420c temp
60 litres/min
9mm nozzle

'went way too quick'
flashed over in about 3-5 seconds

the balls need to very slowly melt


dry paste this time
crumbly / grainy
scratching it over the mask with spatula


going up slow is to make sure all parts
of the work area are at an even heat

melting should happen a bit more slowly
around 5-10 seconds, in an orderly pattern

dry paste makes things easier
dont have to worry about weeping under the stencil
and it gives more time to melt