Digibit R1 testing (en)

gistfile1.txt

digibit r1 testing:

disable digibit r1 tuners in tvheadend
unplug phyically the power cable for 50 minutes - 1 hour

unplug all connections with spanner

try cables 1,2,3,4 on bravia TV. check signal is OK "system info" on NHK World HD
RESULT: ok
+ signal excellent on first 2 cables, with good picture and signal strength for the channel "NHK World HD"
+ signal almost perfect on cable 3
+ signal good (maybe a little worse grounding) on cable 4, still good picture for the channel "NHK World HD"
Conclusion:
 will use only the best cables 1 and 2 for the testing

take cable 1
 - plug into input 1
  - switch on digibit device
   - launch eyeTV 3.6 on mac
    - check signal / reception on NHK
     - close eyeTV 3.6 on mac
      - switch off digibit device
RESULT: ok

take cable 1
 - plug into input 2
  - switch on digibit device
   - launch eyeTV 3.6 on mac
    - check signal / reception on NHK
     - close eyeTV 3.6 on mac
      - switch off digibit device
RESULT: ok

take cable 1
- plug into input 3
 - switch on digibit device
  - launch eyeTV 3.6 on mac
   - check signal / reception on NHK
    - close eyeTV 3.6 on mac
     - switch off digibit device
RESULT: fail
! no signal when input 3 is connected to good source
! led for input number 1 is illuminated. should be input 3

take cable 1
 - plug into input 4
  - switch on digibit device
   - launch eyeTV 3.6 on mac
    - check signal / reception on NHK
     - close eyeTV 3.6 on mac
      - switch off digibit device
RESULT: fail
! no signal when input 4 is connected to good source
! led for input number 1 is illuminated. should be input 4

take cable 1
 - plug into input 1
take cable 2
 - plug into input 2
  - switch on digibit device
   - launch eyeTV 3.6 on mac
     - check signal / reception on NHK
   - launch elgato SAT>IP app on iOS device
     - check signal reception on Channel 4 whike NHK is still streaming
   - close elgato SAT>IP app on iOS device
   - close eyeTV 3.6 on mac
      - switch off digibit device
RESULT: ok
+ signal work on nhk on mac, first connected client
+ led for input number 1 is illuminated. should be input 1
+ signal work on channel 4 on iOS device, second connected client
+ led for input number 2 is illuminated. should be input 2

take cable 1
 - plug into input 1
take cable 2
 - plug into input 3
  - switch on digibit device
   - launch eyeTV 3.6 on mac
     - check signal / reception on NHK
   - launch elgato SAT>IP app on iOS device
     - check signal reception on Channel 4 whike NHK is still streaming
   - close elgato SAT>IP app on iOS device
   - close eyeTV 3.6 on mac
      - switch off digibit device
RESULT: fail
+ signal work on nhk on mac, first connected client
+ led for input number 1 is illuminated. should be input 1
! no signal on iOS app, the 2nd connected client
! led for input number 2 is illuminated. should be input 3