dyum

%=056,W=303,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.3,FA=03.5,AH=-175,%=056,W=302,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.3,FA=03.5,AH=-175,%=056,W=301,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.1,FA=03.6,AH=-175,%=056,W=295,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.1,FA=03.6,AH=-175,%=056,W=296,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=299,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=300,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=299,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=300,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=301,DSC=0.00,DSE=288,V=48.3,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=301,DSC=0.00,DSE=288,V=48.3,FV=48.0,V2=00.0,A=06.3,FA=03.6,AH=-175,%=056,W=302,DSC=0.00,DSE=288,V=48.3,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=301,DSC=0.00,DSE=288,V=48.2,FV=48.0,V2=00.0,A=06.2,FA=03.6,AH=-175,%=056,W=301,DSC=0.00,DSE=288,V=48.3,FV=48.0,V2=00

dyum

    GNU GRUB  version 0.97  (604K lower / 244604K upper memory)

 +-------------------------------------------------------------------------+
 | ---- No "boot/grub/grub.conf" file found on 1st USB or SD device ----   |
 | Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU             |
 | Clanton SVP kernel-SPI initrd-MassStorage big-rootfs IMR-On IO-APIC/H>  |
 | Clanton SVP kernel-MassStorage initrd-MassStorage small-rootfs IMR-On>  |

dyum

#!/bin/sh

if [ ! -e '/sys/class/gpio/gpio7' ]; then
  echo "GPIO 7 is not exported, setting it up..."
  echo 7 > /sys/class/gpio/export
  echo out > /sys/class/gpio/gpio7/direction
fi

echo "Ctrl+C to quit, blinking now"
while [ 1 ]; do