View BTconfig.ino
#include <SoftwareSerial.h>
SoftwareSerial mySerial(8, 9);
void setup()
{
Serial.begin(9600);
Serial.println("Ready for configuration...");
View EGRA_SG-90_SAMPLE_CODE.ino
/*
E-GRA SG-90 SAMPLE CODES
THIS IS A COMPLETE CODE FOR CONTROLLING THE
ROBOTIC ARM (GRIPPER, ELBOW, SHOULDER, BASE)
INTERFACE TO GIZDUINO 328 UNO AND KEYPAD.
OPEN THE SERIAL MONITOR TO SEE THE POSITIONS
OR DEGREES.
LIBRARY USED:
View On_Off_sequence.ino
////////////////////////////////////////////////
// //
// ON OFF SEQUENCE //
// //
// This serves as a sample program for //
// an LED monitor showing a on off sequence. //
// //
// //
// Codes by: //
// eGizmo Mechatronix Central //
View Running_light.ino
////////////////////////////////////////////////
// //
// RUNING LIGHT //
// //
// This serves as a sample program for //
// an LED monitor showing a running light //
// //
// //
// Codes by: //
// eGizmo Mechatronix Central //
View UHF_Receiver.ino
String inputString = ""; // a string to hold incoming data
String COMMAND = "";
void setup() {
Serial.begin(9600);
inputString.reserve(200);
}
View UHF_Transmitter.ino
String inputString = ""; // a string to hold incoming data
String COMMAND = "";
void setup() {
Serial.begin(9600);
inputString.reserve(200);
}
void loop()
{
View LM35.ino
/*
"GizDuino Starter kit"
Temperature sensor (LM35) Sample code
STEP 1: Construct the circuit of GizDuino Temperature sensor.
STEP 2: Connect the USB Cable to your computer.
STEP 3: Open the Arduino IDE.
STEP 4: Open the Temperature sensor (LM35) Sample code from GizDuino Starter kit code.
STEP 5: Then, click Upload.
View Buzzer.ino
/*
"GizDuino Starter kit"
Buzzer Sample code
STEP 1: Construct the circuit of GizDuino Buzzer.
STEP 2: Connect the USB Cable to your computer.
STEP 3: Open the Arduino IDE.
STEP 4: Open the Buzzer Sample code from GizDuino Starter kit code.
STEP 5: Then, click Upload.
View LDR.ino
/*
"GizDuino Starter kit"
LDR Sample code
STEP 1: Construct the circuit of GizDuino LDR.
STEP 2: Connect the USB Cable to your computer.
STEP 3: Open the Arduino IDE.
STEP 4: Open the LDR Sample code from GizDuino Starter kit code.
STEP 5: Then, click Upload.
View Potentiometer.ino
/*
"GizDuino Starter kit"
Potentiometer Sample code
STEP 1: Construct the circuit of GizDuino Potentiometer.
STEP 2: Connect the USB Cable to your computer.
STEP 3: Open the Arduino IDE.
STEP 4: Open the Potentiometer Sample code from GizDuino Starter kit code.
STEP 5: Then, click Upload.