Created
December 11, 2013 04:57
-
-
Save elcepi/7905279 to your computer and use it in GitHub Desktop.
cgminer init script start-stop-daemon
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#! /bin/sh | |
### BEGIN INIT INFO | |
# Provides: cgminer | |
# Required-Start: $remote_fs $syslog | |
# Required-Stop: $remote_fs $syslog | |
# Default-Start: 2 3 4 5 | |
# Default-Stop: 0 1 6 | |
# Short-Description: Example initscript | |
# Description: This file should be used to construct scripts to be | |
# placed in /etc/init.d. | |
### END INIT INFO | |
# Author: Jose Espinosa @jose-espinoas | |
# Donations: 1SJXbsiphSVw133p5wsGa3qM2vfDmuD5M | |
# Instructions: | |
# 1. Add your own parameters on the PARAM variable below. Most of the | |
# parameters needed can be determined in file | |
# ${HOME}/.cgminer/cgminer.conf | |
# 2. Copy this file to /etc/init.d/ by typing | |
# sudo cp cgminer /ect/init.d | |
# 3. Mark to run at boot time | |
# sudo update-rc.d cgminer enable | |
# 4. To allow reload you need to add | |
# W:127.0.0.1 | |
# At the begining of the api-allow parameter of your config file | |
# Now if your computer restarts cgminer will restart :) | |
# Do NOT "set -e" | |
# PATH should only include /usr/* if it runs after the mountnfs.sh script | |
USER=pi | |
PATH=/sbin:/usr/sbin:/bin:/usr/bin | |
DESC="cgminer start script" | |
NAME=cgminer | |
DAEMON=/usr/local/bin/$NAME | |
PIDFILE=/var/run/$NAME.pid | |
SCRIPTNAME=/etc/init.d/$NAME | |
#DAEMON_ARGS="-S /dev/ttyUSB0" | |
#DAEMON_ARGS="" | |
# Exit if the package is not installed | |
[ -x "$DAEMON" ] || exit 0 | |
# Read configuration variable file if it is present | |
[ -r /etc/default/$NAME ] && . /etc/default/$NAME | |
# Load the VERBOSE setting and other rcS variables | |
. /lib/init/vars.sh | |
# Define LSB log_* functions. | |
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present | |
# and status_of_proc is working. | |
. /lib/lsb/init-functions | |
# | |
# Function that starts the daemon/service | |
# | |
do_start() | |
{ | |
# Return | |
# 0 if daemon has been started | |
# 1 if daemon was already running | |
# 2 if daemon could not be started | |
start-stop-daemon --start --chuid ${USER} --quiet --pidfile $PIDFILE \ | |
--make-pidfile --background --chdir /home/${USER} --exec $DAEMON --test > /dev/null \ | |
|| return 1 | |
start-stop-daemon --start --chuid ${USER} --quiet --pidfile $PIDFILE \ | |
--make-pidfile --background --chdir /home/${USER} --exec $DAEMON -- $DAEMON_ARGS \ | |
|| return 2 | |
} | |
# | |
# Function that stops the daemon/service | |
# | |
do_stop() | |
{ | |
# Return | |
# 0 if daemon has been stopped | |
# 1 if daemon was already stopped | |
# 2 if daemon could not be stopped | |
# other if a failure occurred | |
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME | |
start-stop-daemon --stop --user ${USER} --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON | |
RETVAL="$?" | |
rm -f $PIDFILE | |
return "$RETVAL" | |
} | |
# | |
# Function that sends a SIGHUP to the daemon/service | |
# | |
do_reload() { | |
# | |
# If the daemon can reload its configuration without | |
# restarting (for example, when it is sent a SIGHUP), | |
# then implement that here. | |
# | |
echo \{\"command\": \"restart\"\} | nc localhost 4028 > /dev/null | |
return 0 | |
} | |
case "$1" in | |
start) | |
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" | |
do_start | |
case "$?" in | |
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; | |
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; | |
esac | |
;; | |
stop) | |
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" | |
do_stop | |
case "$?" in | |
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; | |
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; | |
esac | |
;; | |
status) | |
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? | |
;; | |
reload) | |
# | |
# If do_reload() is not implemented then leave this commented out | |
# and leave 'force-reload' as an alias for 'restart'. | |
# | |
log_daemon_msg "Reloading $DESC" "$NAME" | |
do_reload | |
log_end_msg $? | |
;; | |
restart) | |
# | |
# If the "reload" option is implemented then remove the | |
# 'force-reload' alias | |
# | |
log_daemon_msg "Restarting $DESC" "$NAME" | |
do_stop | |
case "$?" in | |
0|1) | |
do_start | |
case "$?" in | |
0) log_end_msg 0 ;; | |
1) log_end_msg 1 ;; # Old process is still running | |
*) log_end_msg 1 ;; # Failed to start | |
esac | |
;; | |
*) | |
# Failed to stop | |
log_end_msg 1 | |
;; | |
esac | |
;; | |
*) | |
echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload}" >&2 | |
exit 3 | |
;; | |
esac |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment