elizabethn119

import os
import glob
import time
from ISStreamer.Streamer import Streamer

streamer = Streamer(bucket_name="Temperature Stream", bucket_key="piot_temp_stream031815", access_key="PUT_YOUR_ACCESS_KEY_HERE")

os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')

elizabethn119

import adafruit_dht
from ISStreamer.Streamer import Streamer
import time
import board

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "Office"
BUCKET_NAME = ":partly_sunny: Room Temperatures"
BUCKET_KEY = "dht22sensor"
ACCESS_KEY = "ENTER ACCESS KEY HERE"

elizabethn119

from sense_hat import SenseHat  
import time  
import sys  
from ISStreamer.Streamer import Streamer  
  
# --------- User Settings ---------
BUCKET_NAME = "Office Weather"
BUCKET_KEY = "sensehat"
ACCESS_KEY = "Your_Access_Key"
SENSOR_LOCATION_NAME = "Office"

elizabethn119

import time

from board import SCL, SDA
import busio

from adafruit_seesaw.seesaw import Seesaw

i2c_bus = busio.I2C(SCL, SDA)

ss = Seesaw(i2c_bus, addr=0x36)

elizabethn119

#include <WiFi.h>
#include <HTTPClient.h>

//-------- User Settings -----------
const char* ssid = "WiFi NAME";
const char* password = "WiFi PASSWORD";
const char* accesskey = "ENTER ACCESS KEY HERE";
const char* bucketkey = "ENTER BUCKET KEY HERE";
const char* signalname = "ENTER SIGNAL NAME";
//----------------------------------

elizabethn119

#####
# This is a custom 'getting started' script, made with care for elizabeth@initialstate.com.
# If you have any questions, please email us! support@initialstate.com
#####

# Import the ISStreamer module
from ISStreamer.Streamer import Streamer
# Import time for delays
import time

elizabethn119

#include <WiFi.h>
#include <HTTPClient.h>

//-------- User Settings -----------
const char* ssid = "WiFi NAME";
const char* password = "WiFi PASSWORD";
const char* accesskey = "ENTER ACCESS KEY HERE";
const char* bucketkey = "ENTER BUCKET KEY HERE";
//----------------------------------

elizabethn119

import time
import board
import adafruit_bh1750
from ISStreamer.Streamer import Streamer

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "Office"
BUCKET_NAME = "House Plant"
BUCKET_KEY = "soilsensor"
ACCESS_KEY = "ENTER ACCESS KEY HERE"

elizabethn119

import time
from ISStreamer.Streamer import Streamer
from board import SCL, SDA
import busio
from adafruit_seesaw.seesaw import Seesaw

# --------- User Settings ---------
SENSOR_LOCATION_NAME = "House Plant"
BUCKET_NAME = "House Plant"
BUCKET_KEY = "soilsensor"

elizabethn119

# SPDX-FileCopyrightText: 2020 Bryan Siepert, written for Adafruit Industries

# SPDX-License-Identifier: Unlicense
import time
import board
import adafruit_bh1750

i2c = board.I2C()

sensor = adafruit_bh1750.BH1750(i2c)