Skip to content

Instantly share code, notes, and snippets.

@facboy
Created Nov 14, 2020
Embed
What would you like to do?
OpenVPN with NSS R7800 kernel log - no eth0
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.75 (chrisng@xubuntu-vbox) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r12771-43e31bae67)) #0 SMP Sat Nov 14 11:57:26 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] Normal zone: 1080 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 15 pages/cpu s30220 r8192 d23028 u61440
[ 0.000000] pcpu-alloc: s30220 r8192 d23028 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121800
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 474820K/491520K available (6144K kernel code, 196K rwdata, 1544K rodata, 1024K init, 233K bss, 16700K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4ec with crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000289] pid_max: default: 32768 minimum: 301
[ 0.000497] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000517] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001555] CPU: Testing write buffer coherency: ok
[ 0.002730] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002913] rcu: Hierarchical SRCU implementation.
[ 0.003422] smp: Bringing up secondary CPUs ...
[ 0.005377] smp: Brought up 1 node, 2 CPUs
[ 0.005392] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005403] CPU: All CPU(s) started in SVC mode.
[ 0.017151] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017333] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.017496] pinctrl core: initialized pinctrl subsystem
[ 0.018695] NET: Registered protocol family 16
[ 0.018988] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.020390] cpuidle: using governor ladder
[ 0.020459] cpuidle: using governor menu
[ 0.057025] usbcore: registered new interface driver usbfs
[ 0.057107] usbcore: registered new interface driver hub
[ 0.057201] usbcore: registered new device driver usb
[ 0.057263] pps_core: LinuxPPS API ver. 1 registered
[ 0.057277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.057310] PTP clock support registered
[ 0.058202] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.059350] clocksource: Switched to clocksource dg_timer
[ 0.060252] thermal_sys: Registered thermal governor 'step_wise'
[ 0.062906] NET: Registered protocol family 2
[ 0.063666] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.063709] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.063751] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.063804] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.063904] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.063936] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.064171] NET: Registered protocol family 1
[ 0.064221] PCI: CLS 0 bytes, default 64
[ 0.065540] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.072508] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.072524] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.113048] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.113203] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.113323] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.113615] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.113641] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.113685] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.113723] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.335028] qcom-pcie 1b500000.pci: Link up
[ 0.335193] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.335217] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335236] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.335252] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.335269] pci_bus 0000:00: scanning bus
[ 0.335316] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.335491] pci 0000:00:00.0: supports D1
[ 0.335512] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.335531] pci 0000:00:00.0: PME# disabled
[ 0.340050] pci_bus 0000:00: fixups for bus
[ 0.340073] PCI: bus0: Fast back to back transfers disabled
[ 0.340094] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.340236] pci_bus 0000:01: scanning bus
[ 0.340416] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.340772] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.341922] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.341968] pci 0000:01:00.0: PME# disabled
[ 0.346475] pci_bus 0000:01: fixups for bus
[ 0.346549] PCI: bus1: Fast back to back transfers disabled
[ 0.346565] pci_bus 0000:01: bus scan returning with max=01
[ 0.346585] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.346604] pci_bus 0000:00: bus scan returning with max=ff
[ 0.346638] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.346663] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.346794] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.346815] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.347023] pcieport 0000:00:00.0: assign IRQ: got 39
[ 0.347591] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[ 0.348207] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.348340] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.348471] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.348736] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.348761] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.348804] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.348839] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.576735] qcom-pcie 1b700000.pci: Link up
[ 0.576898] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.576920] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.576936] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.576951] pci_bus 0001:00: scanning bus
[ 0.576996] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.577153] pci 0001:00:00.0: supports D1
[ 0.577171] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.577190] pci 0001:00:00.0: PME# disabled
[ 0.581656] pci_bus 0001:00: fixups for bus
[ 0.581677] PCI: bus0: Fast back to back transfers disabled
[ 0.581697] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.581849] pci_bus 0001:01: scanning bus
[ 0.582043] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.582424] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.583661] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.583709] pci 0001:01:00.0: PME# disabled
[ 0.583967] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.588284] pci_bus 0001:01: fixups for bus
[ 0.588360] PCI: bus1: Fast back to back transfers disabled
[ 0.588378] pci_bus 0001:01: bus scan returning with max=01
[ 0.588395] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.588415] pci_bus 0001:00: bus scan returning with max=ff
[ 0.588443] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.588467] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.588600] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.588621] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.588812] pcieport 0001:00:00.0: assign IRQ: got 41
[ 0.589489] pcieport 0001:00:00.0: AER: enabled with IRQ 42
[ 0.592272] L2 @ QSB rate. Forcing new rate.
[ 0.592503] L2 @ 384000 KHz
[ 0.592691] CPU0 @ 800000 KHz
[ 0.592705] CPU1 @ QSB rate. Forcing new rate.
[ 0.592836] CPU1 @ 384000 KHz
[ 0.596672] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.599007] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.600001] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.600054] msm_serial 16340000.serial: uartclk = 7372800
[ 0.600127] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 43, base_baud = 460800) is a MSM
[ 0.600167] msm_serial: console setup on port #0
[ 1.376492] printk: console [ttyMSM0] enabled
[ 1.381561] msm_serial: driver initialized
[ 1.390894] loop: module loaded
[ 1.392527] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.392848] nand: AMD/Spansion S34MS01G2
[ 1.399444] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.403531] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.410804] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.417595] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.427963] random: fast init done
[ 1.444397] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.453879] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.455691] 0x000001200000-0x000001340000 : "art"
[ 1.460962] 0x000001340000-0x000001480000 : "artbak"
[ 1.465772] 0x000001480000-0x000001880000 : "kernel"
[ 1.475410] 0x000001880000-0x000007900000 : "ubi"
[ 1.635939] 0x000007900000-0x000008000000 : "reserve"
[ 1.650348] libphy: ipq8064_mdio_bus: probed
[ 1.665590] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.506023] ar8327: qca,phy-rgmii-en is not specified
[ 2.506634] libphy: Fixed MDIO Bus: probed
[ 2.510720] i2c /dev entries driver
[ 2.516500] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.517556] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.525475] sdhci: Secure Digital Host Controller Interface driver
[ 2.532101] sdhci: Copyright(c) Pierre Ossman
[ 2.538264] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.545211] NET: Registered protocol family 10
[ 2.549802] Segment Routing with IPv6
[ 2.552766] NET: Registered protocol family 17
[ 2.556509] Bridge firewalling registered
[ 2.561079] 8021q: 802.1Q VLAN Support v1.8
[ 2.564861] Registering SWP/SWPB emulation handler
[ 2.596588] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.610571] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.610862] s1a: supplied by regulator-dummy
[ 2.614750] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.619075] s1b: supplied by regulator-dummy
[ 2.624033] s2a: Bringing 0uV into 775000-775000uV
[ 2.628282] s2a: supplied by regulator-dummy
[ 2.632880] s2b: Bringing 0uV into 775000-775000uV
[ 2.637295] s2b: supplied by regulator-dummy
[ 2.651969] UBI: auto-attach mtd6
[ 2.651997] ubi0: attaching mtd6
[ 2.730774] random: crng init done
[ 3.515922] ubi0: scanning is finished
[ 3.527917] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 3.527944] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.532380] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.539062] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.546010] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 3.552771] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.558942] ubi0: max/mean erase counter: 21/12, WL threshold: 4096, image sequence number: 846191805
[ 3.566048] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 3.575460] ubi0: background thread "ubi_bgt0d" started, PID 68
[ 3.576354] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.590262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.595752] hctosys: unable to open rtc device (rtc0)
[ 3.609938] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.611257] Freeing unused kernel memory: 1024K
[ 3.639993] Run /sbin/init as init process
[ 4.014097] init: Console is alive
[ 4.014222] init: - watchdog -
[ 5.864008] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.036813] SGI XFS with security attributes, no debug enabled
[ 6.040746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.044372] SCSI subsystem initialized
[ 6.052038] libata version 3.00 loaded.
[ 6.053916] ahci 29000000.sata: 29000000.sata supply ahci not found, using dummy regulator
[ 6.054008] ahci 29000000.sata: 29000000.sata supply phy not found, using dummy regulator
[ 6.061229] ahci 29000000.sata: 29000000.sata supply target not found, using dummy regulator
[ 6.073864] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 6.077873] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 6.083194] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 6.092823] scsi host0: ahci
[ 6.100228] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[ 6.432199] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.438124] ehci-fsl: Freescale EHCI Host controller driver
[ 6.440221] ehci-platform: EHCI generic platform driver
[ 6.452597] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.453072] ohci-platform: OHCI generic platform driver
[ 6.459734] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 6.462785] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.468686] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.474859] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 6.482486] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 6.486395] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.492211] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.498201] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 6.505654] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 6.570906] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 6.643209] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.643250] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.647733] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 6.655256] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0x11000000
[ 6.665387] hub 1-0:1.0: USB hub found
[ 6.670493] hub 1-0:1.0: 1 port detected
[ 6.674427] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.678314] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.683685] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.691996] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.698092] hub 2-0:1.0: USB hub found
[ 6.706099] hub 2-0:1.0: 1 port detected
[ 6.709909] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.713649] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 6.719075] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 6.726605] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0x10000000
[ 6.737699] hub 3-0:1.0: USB hub found
[ 6.741872] hub 3-0:1.0: 1 port detected
[ 6.745766] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.749757] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 6.754966] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.762674] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.769417] hub 4-0:1.0: USB hub found
[ 6.777463] hub 4-0:1.0: 1 port detected
[ 6.783855] usbcore: registered new interface driver usb-storage
[ 6.785096] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.801624] init: - preinit -
[ 19.484774] mount_root: loading kmods from internal overlay
[ 19.517333] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 19.521307] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 19.549773] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 19.574186] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 19.580042] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 19.584832] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 19.595439] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 19.605287] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 19.697904] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 19.697950] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 19.708664] blk_update_request: I/O error, dev mtdblock1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 19.715473] blk_update_request: I/O error, dev mtdblock1, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 19.726280] blk_update_request: I/O error, dev mtdblock1, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 19.736973] blk_update_request: I/O error, dev mtdblock1, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 19.747627] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 19.760450] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 19.941136] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 19.941417] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 162
[ 19.992200] UBIFS (ubi0:1): recovery needed
[ 20.117039] UBIFS (ubi0:1): recovery completed
[ 20.117130] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 20.120480] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 20.128278] UBIFS (ubi0:1): FS size: 83169280 bytes (79 MiB, 655 LEBs), journal size 4190208 bytes (3 MiB, 33 LEBs)
[ 20.138269] UBIFS (ubi0:1): reserved for root: 3928290 bytes (3836 KiB)
[ 20.148473] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D69E2120-B004-4B9A-9B56-BD9A952BB0AB, small LPT model
[ 20.157003] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 20.174096] block: extroot: not configured
[ 20.174236] UBIFS (ubi0:1): un-mount UBI device 0
[ 20.177479] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 20.185300] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 20.188483] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 163
[ 20.289616] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 20.289697] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 20.296424] UBIFS (ubi0:1): FS size: 83169280 bytes (79 MiB, 655 LEBs), journal size 4190208 bytes (3 MiB, 33 LEBs)
[ 20.306383] UBIFS (ubi0:1): reserved for root: 3928290 bytes (3836 KiB)
[ 20.316622] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D69E2120-B004-4B9A-9B56-BD9A952BB0AB, small LPT model
[ 20.329375] mount_root: loading kmods from internal overlay
[ 20.368039] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 20.371282] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 20.389172] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 20.394148] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 20.402204] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 20.406462] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 20.621293] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 20.627589] block: extroot: not configured
[ 20.630928] mount_root: switching to ubifs overlay
[ 20.652134] urandom-seed: Seeding with /etc/urandom.seed
[ 20.760283] procd: - early -
[ 20.760346] procd: - watchdog -
[ 21.321598] procd: - watchdog -
[ 21.322218] procd: - ubus -
[ 21.405561] procd: - init -
[ 22.183935] urngd: v1.0.2 started.
[ 22.295117] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.315286] Key type cifs.idmap registered
[ 22.327007] NET: Registered protocol family 15
[ 22.328687] Initializing XFRM netlink socket
[ 22.332073] tun: Universal TUN/TAP device driver, 1.6
[ 22.338596] **********************************************************
[ 22.339800] * Driver :NSS GMAC Driver - RTL v(3.72a)
[ 22.346135] * Version :1.0
[ 22.351324] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[ 22.354384] **********************************************************
[ 22.504910] nss_driver - fw of size 536324 bytes copied to load addr: 40000000, nss_id : 0
[ 22.505740] nss_driver - Turbo Support 1
[ 22.512141] Supported Frequencies -
[ 22.512143] 800Mhz
[ 22.516222] 800Mhz
[ 22.519849] 800Mhz
[ 22.521604]
[ 22.525975] 8ddebf8c: meminfo init succeed
[ 22.551049] nss_driver - fw of size 218224 bytes copied to load addr: 40800000, nss_id : 1
[ 22.551364] b2322889: meminfo init succeed
[ 22.556969] node size 1 # items 2
[ 22.558271] debugfs: File 'n2h' in directory 'stats' already present!
[ 22.562438] memory: 0 0 (avl 487276544) items 2 active_cores 2
[ 22.562449] 8ddebf8c: nss core 0 booted successfully
[ 22.577915] debugfs: File 'qrfs' in directory 'stats' already present!
[ 22.583118] debugfs: File 'c2c_tx' in directory 'stats' already present!
[ 22.589372] debugfs: File 'c2c_rx' in directory 'stats' already present!
[ 22.596302] debugfs: File 'unaligned' in directory 'stats' already present!
[ 22.605774] node size 1 # items 2
[ 22.609592] memory: 0 0 (avl 487276544) items 2 active_cores 2
[ 22.613145] b2322889: nss core 1 booted successfully
[ 22.627446] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 22.631149] gre: GRE over IPv4 demultiplexor driver
[ 22.633055] ip_gre: GRE over IPv4 tunneling driver
[ 22.674921] Mirror/redirect action on
[ 22.683205] u32 classifier
[ 22.683227] input device check on
[ 22.684798] Actions configured
[ 22.695205] fuse: init (API version 7.31)
[ 22.698285] usbcore: registered new interface driver chaoskey
[ 22.698898] Loading modules backported from Linux version v5.8-0-gbcf876870b95
[ 22.704031] Backport generated by backports.git v5.8-1-0-g79400d9e
[ 22.748168] wireguard: WireGuard 1.0.20201112 loaded. See www.wireguard.com for information.
[ 22.748196] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 22.778435] xt_time: kernel timezone is -0000
[ 22.838650] PPP generic driver version 2.4.2
[ 22.839354] PPP MPPE Compression module registered
[ 22.842866] NET: Registered protocol family 24
[ 22.847334] PPTP driver version 0.8.5
[ 22.866708] ath10k_pci 0000:01:00.0: assign IRQ: got 39
[ 22.866731] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x46.
[ 22.866798] ath10k_mac_create, priv_size: 876 hw: c92426af hw->priv: 7ea238e6
[ 22.874081] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 22.880646] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 22.881157] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 23.966146] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 23.966179] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 23.976916] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 26.301422] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 32.127718] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 32.128675] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 32.133360] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 32.216669] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 32.217546] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 32.506394] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 32.598723] ath: EEPROM regdomain sanitized
[ 32.598738] ath: EEPROM regdomain: 0x64
[ 32.598748] ath: EEPROM indicates we should expect a direct regpair map
[ 32.598771] ath: Country alpha2 being used: 00
[ 32.598780] ath: Regpair used: 0x64
[ 32.603520] ath10k_pci 0001:01:00.0: assign IRQ: got 41
[ 32.603555] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x46.
[ 32.603674] ath10k_mac_create, priv_size: 876 hw: fc273d59 hw->priv: 052b9596
[ 32.610947] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 32.617383] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 32.617974] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 33.262353] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 33.262386] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 33.273336] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 35.601261] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[ 41.449992] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 41.451125] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 41.455452] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 41.541072] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 41.541949] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 41.851964] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 41.942450] ath: EEPROM regdomain sanitized
[ 41.942459] ath: EEPROM regdomain: 0x64
[ 41.942464] ath: EEPROM indicates we should expect a direct regpair map
[ 41.942475] ath: Country alpha2 being used: 00
[ 41.942481] ath: Regpair used: 0x64
[ 41.949077] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 44.635490] ECM init
[ 44.635542] ECM database jhash random seed: 0x3d0cdbdd
[ 44.638137] ECM init complete
[ 47.336476] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
[ 48.418037] br-lan: port 1(eth1.1) entered blocking state
[ 48.418096] br-lan: port 1(eth1.1) entered disabled state
[ 48.423472] device eth1.1 entered promiscuous mode
[ 48.427806] device eth1 entered promiscuous mode
[ 48.433804] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 48.437949] br-lan: port 1(eth1.1) entered blocking state
[ 48.443340] br-lan: port 1(eth1.1) entered forwarding state
[ 48.934159] print_req_error: 14 callbacks suppressed
[ 48.934166] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 48.939135] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 48.949801] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 48.960598] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 48.971131] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 48.980897] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 48.997605] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 48.998453] Buffer I/O error on dev mtdblock0, logical block 0, async page read
[ 49.010836] blk_update_request: I/O error, dev mtdblock1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 49.017274] blk_update_request: I/O error, dev mtdblock1, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 49.028034] blk_update_request: I/O error, dev mtdblock1, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 49.038598] blk_update_request: I/O error, dev mtdblock1, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 49.049341] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 49.062304] Buffer I/O error on dev mtdblock1, logical block 0, async page read
[ 49.449848] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 49.537142] ath: EEPROM regdomain: 0x833a
[ 49.537161] ath: EEPROM indicates we should expect a country code
[ 49.540230] ath: doing EEPROM country->regdmn map search
[ 49.546213] ath: country maps to regdmn code: 0x37
[ 49.551640] ath: Country alpha2 being used: GB
[ 49.556177] ath: Regpair used: 0x37
[ 49.560666] ath: regdomain 0x833a dynamically updated by user
[ 49.564018] ath: EEPROM regdomain: 0x833a
[ 49.569973] ath: EEPROM indicates we should expect a country code
[ 49.573891] ath: doing EEPROM country->regdmn map search
[ 49.580034] ath: country maps to regdmn code: 0x37
[ 49.585349] ath: Country alpha2 being used: GB
[ 49.590004] ath: Regpair used: 0x37
[ 49.594376] ath: regdomain 0x833a dynamically updated by user
[ 56.986052] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
[ 56.986088] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 56.991568] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 57.076948] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 57.077813] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 57.507454] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 57.508096] wlan1: Created a NSS virtual interface
[ 57.582304] br-lan: port 2(wlan1) entered blocking state
[ 57.582332] br-lan: port 2(wlan1) entered disabled state
[ 57.586967] device wlan1 entered promiscuous mode
[ 57.894628] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 58.189144] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 58.189337] br-lan: port 2(wlan1) entered blocking state
[ 58.194671] br-lan: port 2(wlan1) entered forwarding state
[ 64.137732] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 64.137772] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 64.143244] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 64.226537] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 64.227358] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 64.615128] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 64.615457] debugfs: File 'virt_if' in directory 'stats' already present!
[ 64.625444] wlan0: Created a NSS virtual interface
[ 64.634221] br-lan: port 3(wlan0) entered blocking state
[ 64.636656] br-lan: port 3(wlan0) entered disabled state
[ 64.642363] device wlan0 entered promiscuous mode
[ 65.278415] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 65.278571] br-lan: port 3(wlan0) entered blocking state
[ 65.283921] br-lan: port 3(wlan0) entered forwarding state
[ 71.200355] br-lan: port 4(wlan0.sta4) entered blocking state
[ 71.200391] br-lan: port 4(wlan0.sta4) entered disabled state
[ 71.205643] device wlan0.sta4 entered promiscuous mode
[ 71.211828] debugfs: File 'virt_if' in directory 'stats' already present!
[ 71.216272] wlan0.sta4: Created a NSS virtual interface
[ 71.223140] br-lan: port 4(wlan0.sta4) entered blocking state
[ 71.227750] br-lan: port 4(wlan0.sta4) entered forwarding state
[ 71.261701] ath10k_pci 0000:01:00.0: Invalid peer id 4 or peer stats buffer, peer: 00000000 sta: 00000000
[ 74.657601] br-lan: port 5(wlan1.sta1) entered blocking state
[ 74.657636] br-lan: port 5(wlan1.sta1) entered disabled state
[ 74.662669] device wlan1.sta1 entered promiscuous mode
[ 74.679063] debugfs: File 'virt_if' in directory 'stats' already present!
[ 74.679365] wlan1.sta1: Created a NSS virtual interface
[ 74.685484] br-lan: port 5(wlan1.sta1) entered blocking state
[ 74.689944] br-lan: port 5(wlan1.sta1) entered forwarding state
[ 1215.820081] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment