-
-
Save faxm0dem/95172effc9ada7c2c3a322f6cf0a8636 to your computer and use it in GitHub Desktop.
bricked model 01
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Sketch uses 20712 bytes (72%) of program storage space. Maximum is 28672 bytes. | |
| Global variables use 1794 bytes (70%) of dynamic memory, leaving 766 bytes for local variables. Maximum is 2560 bytes. | |
| Forcing reset using 1200bps open/close on port /dev/ttyACM0 | |
| PORTS {/dev/ttyACM0, /dev/ttyS0, } / {/dev/ttyS0, } => {} | |
| PORTS {/dev/ttyS0, } / {/dev/ttyS0, } => {} | |
| PORTS {/dev/ttyS0, } / {/dev/ttyACM0, /dev/ttyS0, } => {/dev/ttyACM0, } | |
| Found upload port: /dev/ttyACM0 | |
| /data/fwernli/tmp/arduino-1.8.5/hardware/tools/avr/bin/avrdude -C/data/fwernli/tmp/arduino-1.8.5/hardware/tools/avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D -Uflash:w:/tmp/arduino_build_794541/Model01-Firmware.ino.hex:i | |
| avrdude: Version 6.3, compiled on Jan 17 2017 at 11:00:16 | |
| Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
| Copyright (c) 2007-2014 Joerg Wunsch | |
| System wide configuration file is "/data/fwernli/tmp/arduino-1.8.5/hardware/tools/avr/etc/avrdude.conf" | |
| User configuration file is "/home/fwernli/.avrduderc" | |
| User configuration file does not exist or is not a regular file, skipping | |
| Using Port : /dev/ttyACM0 | |
| Using Programmer : avr109 | |
| Overriding Baud Rate : 57600 | |
| AVR Part : ATmega32U4 | |
| Chip Erase delay : 9000 us | |
| PAGEL : PD7 | |
| BS2 : PA0 | |
| RESET disposition : dedicated | |
| RETRY pulse : SCK | |
| serial program mode : yes | |
| parallel program mode : yes | |
| Timeout : 200 | |
| StabDelay : 100 | |
| CmdexeDelay : 25 | |
| SyncLoops : 32 | |
| ByteDelay : 0 | |
| PollIndex : 3 | |
| PollValue : 0x53 | |
| Memory Detail : | |
| Block Poll Page Polled | |
| Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
| ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
| eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00 | |
| flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00 | |
| lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
| signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
| Programmer Type : butterfly | |
| Description : Atmel AppNote AVR109 Boot Loader | |
| Connecting to programmer: . | |
| Found programmer: Id = "CATERIN"; type = S | |
| Software Version = 1.0; No Hardware Version given. | |
| Programmer supports auto addr increment. | |
| Programmer supports buffered memory access with buffersize=128 bytes. | |
| Programmer supports the following devices: | |
| Device code: 0x44 | |
| avrdude: devcode selected: 0x44 | |
| avrdude: AVR device initialized and ready to accept instructions | |
| Reading | ################################################## | 100% 0.00s | |
| avrdude: Device signature = 0x1e9587 (probably m32u4) | |
| avrdude: reading input file "/tmp/arduino_build_794541/Model01-Firmware.ino.hex" | |
| avrdude: writing flash (20712 bytes): | |
| Writing | avrdude: error: programmer did not respond to command: set addr | |
| avrdude: error: programmer did not respond to command: write block | |
| # ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| avrdude: Error: butterfly programmer uses avr_write_page() but does not | |
| provide a cmd() method. | |
| *** page 127 (addresses 0x0000 - 0x007f) failed to write | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
| ***failed; | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| vrdude: Error: butterfly programmer uses avr_write_page() but does not | |
| provide a cmd() method. | |
| *** page 103 (addresses 0x5068 - 0x50e7) failed to write | |
| # | 100% 0.78s | |
| avrdude: 20712 bytes of flash written | |
| avrdude: verifying flash memory against /tmp/arduino_build_799164/Model01-Firmware.ino.hex: | |
| avrdude: load data flash data from input file /tmp/arduino_build_799164/Model01-Firmware.ino.hex: | |
| avrdude: input file /tmp/arduino_build_799164/Model01-Firmware.ino.hex contains 20712 bytes | |
| avrdude: reading on-chip flash data: | |
| Reading | avrdude: butterfly_recv(): programmer is not responding | |
| avrdude: error: programmer did not respond to command: set addr | |
| avrdude: butterfly_recv(): programmer is not responding | |
| ################################################the selected serial port #### does not exist or your board is not connected | |
| ## | 100% 17.65s | |
| avrdude: verifying ... | |
| avrdude: verification error, first mismatch at byte 0x0060 | |
| 0x0d != 0x0c | |
| avrdude: verification error; content mismatch | |
| avrdude done. Thank you. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment