Skip to content

Instantly share code, notes, and snippets.

@flipy

flipy/openwrt-boot.log

Created March 31, 2020 15:40
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save flipy/58f985aedf11590c1ae49a6187c3e492 to your computer and use it in GitHub Desktop.
Save flipy/58f985aedf11590c1ae49a6187c3e492 to your computer and use it in GitHub Desktop.
Download ZIP
OpenWRT 4.19 boot log
Raw
openwrt-boot.log
mmc_convert_block[INFO]: convert bytes_sz[5606136] to block-size[0x2ac6, 10950]
## Booting kernel from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.19.108
Type: Kernel Image
Compression: uncompressed
Data Start: 0x840000e4
Data Size: 5584336 Bytes = 5.3 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: fab3140e
Hash algo: sha1
Hash value: 85fe1772a67bf6034b0452c8f82c3adb43778b86
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt linksys_whw03 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x845537ec
Data Size: 19929 Bytes = 19.5 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 26d7ef3b
Hash algo: sha1
Hash value: 0b13623787f84585dfeaf8adc05558a136b45a9e
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x845537ec
Loading Kernel Image ... OK
OK
Loading Device Tree to 87067000, end 8706edd8 ... OK
eth1 MAC Address from ART is not valid
Using machid 0x8010006 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.108 (acalvo@gentoo) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r12730+1-1697bac8f7)) #0 SMP Mon Mar 30 16:23:38 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WHW03 (Velop)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x434 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129408
[ 0.000000] Kernel command line: rootfstype=ext4 root=/dev/mmcblk0p15 rootwait console=ttyMSM0,115200n8 rootfstype=ext4 root=/dev/mmcblk0p17 rootwait console=ttyMSM0,115200n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 499064K/522240K available (4850K kernel code, 174K rwdata, 1328K rodata, 10240K init, 230K bss, 23176K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (5843 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (10240 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 175 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 231 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000021] Switching to timer-based delay loop, resolution 20ns
[ 0.000299] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000316] pid_max: default: 32768 minimum: 301
[ 0.000499] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000515] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001353] CPU: Testing write buffer coherency: ok
[ 0.002324] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.002493] rcu: Hierarchical SRCU implementation.
[ 0.003215] smp: Bringing up secondary CPUs ...
[ 0.006168] smp: Brought up 1 node, 4 CPUs
[ 0.006188] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.006196] CPU: All CPU(s) started in SVC mode.
[ 0.011661] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.011818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.011843] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.012100] pinctrl core: initialized pinctrl subsystem
[ 0.013109] NET: Registered protocol family 16
[ 0.013491] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.014646] cpuidle: using governor ladder
[ 0.014696] cpuidle: using governor menu
[ 0.033988] cryptd: max_cpu_qlen set to 1000
[ 0.034771] usbcore: registered new interface driver usbfs
[ 0.034834] usbcore: registered new interface driver hub
[ 0.034916] usbcore: registered new device driver usb
[ 0.034965] pps_core: LinuxPPS API ver. 1 registered
[ 0.034975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.035000] PTP clock support registered
[ 0.036537] clocksource: Switched to clocksource arch_sys_counter
[ 0.037533] NET: Registered protocol family 2
[ 0.038165] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.038205] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.038266] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.038355] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.038473] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.038512] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.038741] NET: Registered protocol family 1
[ 0.150078] No memory allocated for crashlog
[ 0.150283] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.155078] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.155092] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.161219] io scheduler noop registered
[ 0.161238] io scheduler deadline registered (default)
[ 0.162908] qcom-pcie 40000000.pci: host bridge /soc/pci@40000000 ranges:
[ 0.162951] qcom-pcie 40000000.pci: IO 0x40200000..0x402fffff -> 0x40200000
[ 0.162977] qcom-pcie 40000000.pci: MEM 0x40300000..0x40ffffff -> 0x40300000
[ 0.438109] qcom-pcie 40000000.pci: Link up
[ 0.438273] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00
[ 0.438293] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.438310] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff])
[ 0.438324] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff]
[ 0.440511] PCI: bus0: Fast back to back transfers disabled
[ 0.443790] PCI: bus1: Fast back to back transfers disabled
[ 0.443847] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[ 0.443864] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff 64bit]
[ 0.443891] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
[ 0.443967] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.443984] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.446387] pcieport 0000:00:00.0: AER enabled with IRQ 99
[ 0.448163] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.448181] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.449469] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.449552] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.449629] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.449706] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.450391] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.450970] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.451012] msm_serial 78af000.serial: uartclk = 1843200
[ 0.451074] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 28, base_baud = 115200) is a MSM
[ 0.451105] msm_serial: console setup on port #0
[ 1.079338] console [ttyMSM0] enabled
[ 1.084277] msm_serial 78b0000.serial: msm_serial: detected port #1
[ 1.087623] msm_serial 78b0000.serial: uartclk = 1843200
[ 1.093671] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 29, base_baud = 115200) is a MSM
[ 1.099464] msm_serial: driver initialized
[ 1.112118] loop: module loaded
[ 1.113466] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.115536] m25p80 spi0.0: unrecognized JEDEC id bytes: ff, ff, ff
[ 1.122050] spi_qup 78b5000.spi: chipselect 0 already in use
[ 1.127963] spi_master spi0: spi_device register error /soc/spi@78b5000/flash@0
[ 1.133742] spi_master spi0: Failed to create SPI device for /soc/spi@78b5000/flash@0
[ 1.141431] ipq4019-pinctrl 1000000.pinctrl: pin_config_group_set op failed for group 6
[ 1.148799] ipq40xx-mdio 90000.mdio: Error applying setting, reverse things back
[ 1.156745] libphy: ipq40xx_mdio: probed
[ 1.235572] ESS reset ok!
[ 1.268548] ESS reset ok!
[ 1.686401] libphy: Fixed MDIO Bus: probed
[ 1.688240] EDMA using MAC@ - using
[ 1.688252] ae:14:84:1f:ef:de
[ 1.695268] i2c /dev entries driver
[ 1.696271] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 1.701988] sdhci: Secure Digital Host Controller Interface driver
[ 1.705794] sdhci: Copyright(c) Pierre Ossman
[ 1.711906] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.716601] ipq4019-pinctrl 1000000.pinctrl: invalid function sdio_cmd in map table
[ 1.722242] sdhci_msm 7824900.sdhci: Got CD GPIO
[ 1.729936] sdhci_msm 7824900.sdhci: Linked as a consumer to regulator.1
[ 1.766514] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 1.776893] NET: Registered protocol family 10
[ 1.780156] Segment Routing with IPv6
[ 1.780374] NET: Registered protocol family 17
[ 1.784231] 8021q: 802.1Q VLAN Support v1.8
[ 1.788587] Registering SWP/SWPB emulation handler
[ 1.801969] �[ 1.828711] Freeing unused kernel memory: 10240K
[ 1.889840] Run /init as init process
[ 1.916111] init: Console is alive
[ 1.916345] init: - watchdog -
[ 1.926752] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.936108] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
[ 2.029835] mmc0: new HS200 MMC card at address 0001
[ 2.033312] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 2.034413] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[ 2.038777] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[ 2.044281] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB, chardev (247:0)
[ 2.052524] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19
[ 2.087829] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
[ 2.226280] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.226358] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.231067] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[ 2.238375] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0x08a00000
[ 2.248505] hub 1-0:1.0: USB hub found
[ 2.253895] hub 1-0:1.0: 1 port detected
[ 2.257776] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.261500] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.266844] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.274459] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.281522] hub 2-0:1.0: USB hub found
[ 2.289300] hub 2-0:1.0: 1 port detected
[ 2.293217] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.296875] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 2.302355] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[ 2.309763] xhci-hcd xhci-hcd.1.auto: irq 103, io mem 0x06000000
[ 2.319896] hub 3-0:1.0: USB hub found
[ 2.325335] hub 3-0:1.0: 1 port detected
[ 2.329209] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.332938] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 2.338264] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 2.345879] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.352948] hub 4-0:1.0: USB hub found
[ 2.360694] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 2.365986] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.372937] init: - preinit -
mtd_get_mac_ascii: partition devinfo not found!
ip: "" is invalid lladdr
/etc/preinit: line 143: arithmetic syntax error
ip: "" is invalid lladdr
[ 2.732655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.732755] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2.750880] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.969803] procd: - early -
[ 6.969946] procd: - watchdog -
[ 7.635124] procd: - watchdog -
[ 7.639005] procd: - ubus -
[ 7.651873] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.690132] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.690906] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.698203] procd: - init -
Please press Enter to activate this console.
[ 7.965164] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.975817] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
[ 7.975854] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
[ 7.995097] xt_time: kernel timezone is -0000
[ 8.006736] urngd: v1.0.2 started.
[ 8.028384] PPP generic driver version 2.4.2
[ 8.029356] NET: Registered protocol family 24
[ 8.071347] random: crng init done
[ 8.071378] random: 6 urandom warning(s) missed due to ratelimiting
[ 8.264415] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
[ 8.347530] firmware ath10k!pre-cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
[ 8.430590] firmware ath10k!cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
[ 8.509823] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 8.594257] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 8.697942] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 8.699342] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 8.705811] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 8.720982] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-013-b63cea875 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 a09ca172
[ 8.747418] ath10k_ahb a000000.wifi: invalid ATH10K_BD_IE_BOARD length: 12064 < 1563369472
[ 8.804913] firmware ath10k!QCA4019!hw1.0!board.bin: firmware_loading_store: map pages failed
[ 8.805191] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 8.812559] ath10k_ahb a000000.wifi: failed to fetch board file: -11
[ 8.821865] ath10k_ahb a000000.wifi: could not probe fw (-11)
[ 9.077246] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
[ 9.176467] firmware ath10k!pre-cal-ahb-a800000.wifi.bin: firmware_loading_store: map pages failed
[ 9.307846] firmware ath10k!cal-ahb-a800000.wifi.bin: firmware_loading_store: map pages failed
[ 9.404657] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 9.505140] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 9.595492] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 9.597090] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 9.603382] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 9.618773] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-013-b63cea875 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 a09ca172
[ 9.644962] ath10k_ahb a800000.wifi: invalid ATH10K_BD_IE_BOARD length: 12064 < 1563369472
[ 9.689677] firmware ath10k!QCA4019!hw1.0!board.bin: firmware_loading_store: map pages failed
[ 9.689963] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 9.697320] ath10k_ahb a800000.wifi: failed to fetch board file: -11
[ 9.706629] ath10k_ahb a800000.wifi: could not probe fw (-11)
[ 9.718299] kmodloader: done loading kernel modules from /etc/modules.d/*
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment