ghtomcat

#include <Wire.h>

void setup()
{
  Wire.begin();

  Serial.begin(115200);
  Serial.println("\nI2C Scanner");
}

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <WiFi.h>
#include <WiFiMulti.h>
#include <HTTPClient.h>
#include <WiFiClientSecure.h>

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <WiFi.h>
#include <AS5600.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <AS5600.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#include <Adafruit_Sensor.h>

ghtomcat

/*******************************************************************************
 * Copyright (c) 2015 Thomas Telkamp and Matthijs Kooijman
 * Copyright (c) 2018 Terry Moore, MCCI
 *
 * Permission is hereby granted, free of charge, to anyone
 * obtaining a copy of this document and accompanying files,
 * to do whatever they want with them without any restriction,
 * including, but not limited to, copying, modification and redistribution.
 * NO WARRANTY OF ANY KIND IS PROVIDED.
 *

ghtomcat

/*
  Reading CO2, humidity and temperature from the SCD30
  By: Nathan Seidle
  SparkFun Electronics
  Date: May 22nd, 2018
  License: MIT. See license file for more information but you can
  basically do whatever you want with this code.

  Feel like supporting open source hardware?
  Buy a board from SparkFun! https://www.sparkfun.com/products/15112

ghtomcat

/***************************************************************************
  This is a library for the BME680 gas, humidity, temperature & pressure sensor

  Designed specifically to work with the Adafruit BME680 Breakout
  ----> http://www.adafruit.com/products/3660

  These sensors use I2C or SPI to communicate, 2 or 4 pins are required
  to interface.

  Adafruit invests time and resources providing this open source code,

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#include <Adafruit_Sensor.h>

ghtomcat

/**************************************************************************
 read bme280 data and display on ssd1306 
 **************************************************************************/

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#include <Adafruit_Sensor.h>