| # ------------------------------------------------ | |
| # Config files are located in /etc/wireguard/wg0 | |
| # ------------------------------------------------ | |
| # ---------- Server Config ---------- | |
| [Interface] | |
| Address = 10.10.0.1/24 # IPV4 CIDR | |
| Address = fd86:ea04:1111::1/64 # IPV6 CIDR | |
| PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started | |
| PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown |
Type crontab -l to see your cron jobs. Type crontab -e to edit them. You have to use Vim apparently.
Add a line like this:
0,30 * * * * /Users/YOURNAME/Documents/scripts/stretch.sh
That is on every 0th and 30th minute of the hour. Make sure all the separators in there are tabs!