Hank Bao hankbao

## gist:d75294e6f44e0875ac6940b038d7047d

      
              1 file
            
          
              0 forks
            
          
              0 comments
            
          
              0 stars
            
          
                hankbao
                / gist:d75294e6f44e0875ac6940b038d7047d
            
            
              Created
              February 2, 2023 07:59
                — forked from uhfx/gist:3922268
            
              
                Twitter公式/非公式クライアントのコンシューマキー
              
          
    Twitter公式クライアントのコンシューマキー

Twitter for iPhone

Consumer key: IQKbtAYlXLripLGPWd0HUA
Consumer secret: GgDYlkSvaPxGxC4X8liwpUoqKwwr3lCADbz8A7ADU

Twitter for Android

Consumer key: 3nVuSoBZnx6U4vzUxf5w
Consumer secret: Bcs59EFbbsdF6Sl9Ng71smgStWEGwXXKSjYvPVt7qys

Twitter for iPad

Consumer key: CjulERsDeqhhjSme66ECg

  
## services-start.sh
#!/bin/sh

# multi SSID with VLAN script, for ASUS AC86U with merlin
#
# setup before hand:
#       set "router" to "AP Mode"
#               this will put all ports and wireless in br0
#       create 2 guest network
#       enable Administration => System => Enable JFFS custom scripts and configs
#       put this script in /jffs/scripts/, name should be "services-start"

## PracticalSocket.h
/*
 *   C++ sockets on Unix and Windows
 *   Copyright (C) 2002
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,

## PracticalSocket.cpp
/*
 *   C++ sockets on Unix and Windows
 *   Copyright (C) 2002
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,

## Makefile
#Download realtek r8168 linux driver from official site [http://www.realtek.com/downloads/downloadsView.aspx?PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3]
#Unpack source file
#Replace orginal Makefile with this file
#Put this source to 'package' folder of OpenWRT/LEDE SDK
#Build(make menuconfig, make defconfig, make)

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk

PKG_NAME:=r8168

## BreakOnMethod.py
'''
Break on Objective-C 's method using its address'
'''
import shlex
import lldb
import re
def breakonmethod(debugger, command, exe_ctx,result, internal_dict):
    args=shlex.split(command)
    Class=args[0]
    Method=args[1]

## HopperVCppDemangler.py
import urllib, urllib2

def demangle(symbol):
	r = urllib2.Request('http://demangler.com/raw', urllib.urlencode({'input': symbol}))
	response = urllib2.urlopen(r)
	return response.read()

def main():
	doc = Document.getCurrentDocument()
	current = doc.getCurrentAddress()

## Breakpoints_v2.xcbkptlist
<?xml version="1.0" encoding="UTF-8"?>
<Bucket
   type = "2"
   version = "2.0">
   <Breakpoints>

      <!-- All Exceptions -->
      <BreakpointProxy
         BreakpointExtensionID = "Xcode.Breakpoint.ExceptionBreakpoint">
         <BreakpointContent

## sudoku.hs
#!/usr/bin/env runhaskell

-- Note: For a slight improvement in performance, import the non-portable
-- Data.Array.Unboxed module instead of Data.Array, and change the Board
-- type below to use "UArray" instead of "Array".
import Data.Array

-- Solve the example puzzle specified below
-- TODO: read puzzle from input
main = do

## Fuckgfw.conf
[General]
loglevel = notify
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12,127.0.0.0/24

[Proxy]

// ADD YOUR PROXY HERE, DON'T FORGET TO REMOVE #

# Proxy = http,$IP,$PORT,$USERNAME,$PASSWORD
# Proxy = https,$IP,$PORT,$USERNAME,$PASSWORD
	#!/bin/sh

	# multi SSID with VLAN script, for ASUS AC86U with merlin
	#
	# setup before hand:
	# set "router" to "AP Mode"
	# this will put all ports and wireless in br0
	# create 2 guest network
	# enable Administration => System => Enable JFFS custom scripts and configs
	# put this script in /jffs/scripts/, name should be "services-start"
	/*
	* C++ sockets on Unix and Windows
	* Copyright (C) 2002
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	#Download realtek r8168 linux driver from official site [http://www.realtek.com/downloads/downloadsView.aspx?PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3]
	#Unpack source file
	#Replace orginal Makefile with this file
	#Put this source to 'package' folder of OpenWRT/LEDE SDK
	#Build(make menuconfig, make defconfig, make)

	include $(TOPDIR)/rules.mk
	include $(INCLUDE_DIR)/kernel.mk

	PKG_NAME:=r8168
	'''
	Break on Objective-C 's method using its address'
	'''
	import shlex
	import lldb
	import re
	def breakonmethod(debugger, command, exe_ctx,result, internal_dict):
	args=shlex.split(command)
	Class=args[0]
	Method=args[1]
	import urllib, urllib2

	def demangle(symbol):
	r = urllib2.Request('http://demangler.com/raw', urllib.urlencode({'input': symbol}))
	response = urllib2.urlopen(r)
	return response.read()

	def main():
	doc = Document.getCurrentDocument()
	current = doc.getCurrentAddress()
	<?xml version="1.0" encoding="UTF-8"?>
	<Bucket
	type = "2"
	version = "2.0">
	<Breakpoints>

	<!-- All Exceptions -->
	<BreakpointProxy
	BreakpointExtensionID = "Xcode.Breakpoint.ExceptionBreakpoint">
	<BreakpointContent
	#!/usr/bin/env runhaskell

	-- Note: For a slight improvement in performance, import the non-portable
	-- Data.Array.Unboxed module instead of Data.Array, and change the Board
	-- type below to use "UArray" instead of "Array".
	import Data.Array

	-- Solve the example puzzle specified below
	-- TODO: read puzzle from input
	main = do
	[General]
	loglevel = notify
	bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12,127.0.0.0/24

	[Proxy]

	// ADD YOUR PROXY HERE, DON'T FORGET TO REMOVE #

	# Proxy = http,$IP,$PORT,$USERNAME,$PASSWORD
	# Proxy = https,$IP,$PORT,$USERNAME,$PASSWORD