houmei/galileo-boot-sd.txt

## galileo-boot-sd.txt

     Press [Enter] to directly boot.
     Press [F7]    to show boot menu options.


    GNU GRUB  version 0.97  (604K lower / 245628K upper memory)

 +-------------------------------------------------------------------------+
 | Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU             |
 | Clanton SVP kernel-SPI rootfs-SD IMR-On IO-APIC/HPET NoEMU              |
 | Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I>  |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, 'e' to edit the
      commands before booting, 'a' to modify the kernel arguments
      before booting, or 'c' for a command-line.

   The highlighted entry will be booted automatically in 1 seconds.


Found layout.conf @ 0xffcff000 len 0x00000d18
#Generated by Buildbot - Sysimage 782
#EXAMPLE LAYOUT.CONF FILE FOR FPGA/RELEASE

# WARNING: this file is indirectly included in a Makefile where it
# defines Make targets and pre-requisites. As a consequence you MUST
# run "make clean" BEFORE making changes to it. Failure to do so may
# result in the make process being unable to clean files it no longer
# has references to.

[main]
size=8388608
type=global


[MFH]
version=0x1
flags=0x0
address=0xfff08000
type=mfh


[Flash Image Version]
type=mfh.version
meta=version
value=782

[ROM_OVERLAY]
address=0xfffe0000
#item_file=/p/clanton/swbuilds/BootRom/Ver_1_00_09/Clanton.rom
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
type=some_type
# in_capsule=no

[signed-key-module]
address=0xfffd8000
item_file=config/SvpSignedKeyModule.bin
svn_index=0
type=some_type

[svn-area]
address=0xfffd0000
item_file=config/SVNArea.bin
type=some_type

[fixed_recovery_image]
address=0xfff90000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
sign=yes
type=mfh.host_fw_stage1_signed
svn_index=2
# in_capsule=no

[NV_Storage]
address=0xfff30000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
type=some_type

[RMU]
address=0xfff00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
type=none_registered

[boot_stage1_image1]
address=0xffec0000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
sign=yes
boot_index=0
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage1_image2]
address=0xffe80000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
sign=yes
boot_index=1
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage_2_compact]
address=0xffd00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
sign=yes
type=mfh.host_fw_stage2_signed
svn_index=3

#address=0x002E1000
[Ramdisk]
address=0xffa60000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/image-spi-clanton.cpio.lzma
sign=yes
type=mfh.ramdisk_signed
svn_index=7

[LAYOUT.CONF_DUMP]
address=0xffcff000
type=mfh.build_information
meta=layout

[Kernel]
address=0xff852000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/bzImage
sign=yes
type=mfh.kernel_signed
svn_index=6

[grub.conf]
address=0xff851000
item_file=grub/grub-ce.conf
sign=yes
type=mfh.bootloader_conf_signed
svn_index=5

[grub]
address=0xff800000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/grub.efi
sign=yes
fvwrap=yes
guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
type=mfh.bootloader_signed
svn_index=4

# strings -n 16 '/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv' | grep -i 'clanton.*version' | head | unix2dos
# Clanton RomCode Version
# Clanton Microcode Version a0_1_00_23

[Linux-EFI, setup=0x1091, size=0x200540]
[Initrd, addr=0xd9df000, size=0x15ff49]
[    2.801630] console [ttyS1] enabled, bootconsole disabled
[    2.814524] Real Time Clock Driver v1.12b
[    2.831887] brd: module loaded
[    2.850849] loop: module loaded
[    2.856513] lpc_sch_probe BIOS_CNTL 0x00000101
[    2.861163] lpc_sch_probe new BIOS_CNTL 0x00000101
[    2.866022] lpc_sch_probe RCBA @ 0xfed1c000
[    2.893841] cpuidle: using governor ladder
[    2.898011] cpuidle: using governor menu
[    2.903661] sdhci: Secure Digital Host Controller Interface driver
[    2.909895] sdhci: Copyright(c) Pierre Ossman
[    2.914986] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
[    2.970251] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
[    2.983782] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.006169] THRM: critical reset 104 c hot 95 c hardware failover 105 c
[    3.034812] TCP: cubic registered
[    3.038199] NET: Registered protocol family 17
[    3.044714] ... APIC ID:      00000000 (0)
[    3.048851] ... APIC VERSION: 00030010
[    3.052737] 0000000000000000000000000000000000000000000000000000000000000000
[    3.052737] 0000000000000000000000000002000000000000000000000000000000000000
[    3.052737] 0000000000000000000000000000000000000000000000000000000000008000
[    3.052737]
[    3.076657] testing the IO APIC.......................
[    3.084353] .................................... done.
[    3.089534] Using IPI Shortcut mode
[    3.106710]   Magic number: 2:797:680
[    3.123201] Freeing unused kernel memory: 272k freed
[    3.131336] Write protecting the kernel text: 3100k
[    3.137387] Write protecting the kernel read-only data: 1284k
[    3.143323] NX-protecting the kernel data: 3044k
[    3.166199] mmc0: new high speed SDHC card at address 1234
[    3.190761] mmcblk0: mmc0:1234 SA32G 29.3 GiB
[    3.226029]  mmcblk0: p1
[    3.241085] tsc: Refined TSC clocksource calibration: 399.076 MHz
[    3.247419] Switching to clocksource tsc
[    3.373126] udevd[542]: starting version 182
Waiting for removable media...
  5[    9.105766] kjournald starting.  Commit interval 5 seconds
[    9.112361] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
[    9.126277] EXT3-fs (loop0): using internal journal
[    9.151343] EXT3-fs (loop0): recovery complete
[    9.155847] EXT3-fs (loop0): mounted filesystem with writeback data mode
INIT: version 2.88 booting
mount: mounting devtmpfs on /dev failed: Device or resource busy
[   10.723077] g_serial: Vendor 0x8086 Product 0xbabe
[   10.728024] g_serial gadget: Gadget Serial v2.4
[   10.733164] g_serial gadget: g_serial ready
[   10.824284] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
[   10.831981] stmmac MSI mode enabled
[   10.835345] Vendor 0x8086 Device 0x0937
[   10.839583] stmmac - user ID: 0x10, Synopsys ID: 0x37
[   10.844811]  DMA HW capability register supported
[   10.849390]  Enhanced/Alternate descriptors
[   10.853927]  RX Checksum Offload Engine supported (type 2)
[   10.859463]  TX Checksum insertion supported
[   10.863887]  Enable RX Mitigation via HW Watchdog Timer
[   10.925679] libphy: stmmac: probed
[   10.929148] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
[   11.037589] ACPI: bus type usb registered
[   11.045257] usbcore: registered new interface driver usbfs
[   11.053128] usbcore: registered new interface driver hub
[   11.061370] usbcore: registered new device driver usb
[   11.087542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.164626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.172000] ohci_hcd 0000:00:14.4: OHCI Host Controller
[   11.178453] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
[   11.186321] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
[   11.272329] hub 1-0:1.0: USB hub found
[   11.276741] hub 1-0:1.0: 2 ports detected
[   11.355177] ehci-pci: EHCI PCI platform driver
[   11.360833] ehci-pci 0000:00:14.3: EHCI Host Controller
[   11.366254] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 2
[   11.375078] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   11.382068] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   11.389539] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
[   11.410249] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
[   11.422441] hub 2-0:1.0: USB hub found
[   11.426454] hub 2-0:1.0: 2 ports detected
[   11.521590] Initializing USB Mass Storage driver...
[   11.528705] usbcore: registered new interface driver usb-storage
[   11.534948] USB Mass Storage support registered.
[   11.735020] intel_cln_gpio_probe UIO addr 0x90006000 internal_addr 0x00000000 size 3765649408 memtype 4096
[   11.830262] cy8c9540a 0-0020: dev_id=0x40
[   12.014155] at24 0-0050: byte_len looks suspicious (no power of 2)!
[   12.021175] at24 0-0050: 11264 byte at24 EEPROM, writable, 1 bytes/write
[   12.090912] i2c /dev entries driver
[   12.311186] spi_pxa2xx_pci: `0' invalid for parameter `gpio_cs'
[   12.377473] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
[   12.387792] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
[   12.410267] spi_master spi0: will run message pump with realtime priority
[   12.429408] spi_master spi1: will run message pump with realtime priority
[   12.751758] cfg80211: Calling CRDA to update world regulatory domain
[   12.795332] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   12.801264] Copyright(c) 2003-2012 Intel Corporation
[   13.067883] Bluetooth: Core ver 2.16
[   13.073258] NET: Registered protocol family 31
[   13.077756] Bluetooth: HCI device and connection manager initialized
[   13.085317] Bluetooth: HCI socket layer initialized
[   13.090446] Bluetooth: L2CAP socket layer initialized
[   13.095812] Bluetooth: SCO socket layer initialized
[   13.117996] usbcore: registered new interface driver btusb
[   13.201789] usbcore: registered new interface driver usbhid
[   13.207415] usbhid: USB HID core driver
Starting Bootlog daemon: bootlogd.
Configuring network interfaces... [   16.383333] eth0: device MAC address 98:4f:ee:00:20:cf
udhcpc (v1.20.2) started
Sending discover...
[   18.390490] libphy: stmmac-1:01 - Link is Up - 100/Full
Sending discover...
Sending select for 192.168.0.114...
Lease of 192.168.0.114 obtained, lease time 268435455
/etc/udhcpc.d/50default: Adding DNS 192.168.0.1
done.
kernel.hotplug = /sbin/mdev
/etc/rcS.d/S55bootmisc.sh: line 66: [: %4Y%2m%2d%2H%2M: integer expression expected
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Starting syslogd/klogd: [   21.936624] NET: Registered protocol family 10
done
Stopping Bootlog daemon: bootlogd.

Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton /dev/ttyS1

clanton login: Sketch child process started, pid=01329
Starting /sketch/sketch.elf /dev/pts/0 /dev/ttyS0
root
root@clanton:~# pwd
/home/root
root@clanton:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs                  302183    139141    147682  49% /
none                    116064         4    116060   0% /dev
/dev/mmcblk0p1        30736384    313280  30423104   1% /media/realroot
/dev/loop0              302183    139141    147682  49% /
/dev/mmcblk0p1        30736384    313280  30423104   1% /media/mmcblk0p1
tmpfs                   116904       124    116780   0% /var/volatile
tmpfs                   116904         0    116904   0% /media/ram
root@clanton:~#

## galileo-boot.txt

    Press [Enter] to directly boot.
     Press [F7]    to show boot menu options.
do_load_config_file() error: cannot open GRUB configuration


    GNU GRUB  version 0.97  (604K lower / 245628K upper memory)

 +-------------------------------------------------------------------------+
 | Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU             |
 | Clanton SVP kernel-SPI initrd-MassStorage big-rootfs IMR-On IO-APIC/H>  |
 | Clanton SVP kernel-MassStorage initrd-MassStorage small-rootfs IMR-On>  |
 | Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I>  |
 | Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I>  |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, 'e' to edit the
      commands before booting, 'a' to modify the kernel arguments
      before booting, or 'c' for a command-line.

   The highlighted entry will be booted automatically in 1 seconds.


Found layout.conf @ 0xffcff000 len 0x00000d18
#Generated by Buildbot - Sysimage 782
#EXAMPLE LAYOUT.CONF FILE FOR FPGA/RELEASE

# WARNING: this file is indirectly included in a Makefile where it
# defines Make targets and pre-requisites. As a consequence you MUST
# run "make clean" BEFORE making changes to it. Failure to do so may
# result in the make process being unable to clean files it no longer
# has references to.

[main]
size=8388608
type=global


[MFH]
version=0x1
flags=0x0
address=0xfff08000
type=mfh


[Flash Image Version]
type=mfh.version
meta=version
value=782

[ROM_OVERLAY]
address=0xfffe0000
#item_file=/p/clanton/swbuilds/BootRom/Ver_1_00_09/Clanton.rom
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
type=some_type
# in_capsule=no

[signed-key-module]
address=0xfffd8000
item_file=config/SvpSignedKeyModule.bin
svn_index=0
type=some_type

[svn-area]
address=0xfffd0000
item_file=config/SVNArea.bin
type=some_type

[fixed_recovery_image]
address=0xfff90000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
sign=yes
type=mfh.host_fw_stage1_signed
svn_index=2
# in_capsule=no

[NV_Storage]
address=0xfff30000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
type=some_type

[RMU]
address=0xfff00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
type=none_registered

[boot_stage1_image1]
address=0xffec0000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
sign=yes
boot_index=0
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage1_image2]
address=0xffe80000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
sign=yes
boot_index=1
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage_2_compact]
address=0xffd00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
sign=yes
type=mfh.host_fw_stage2_signed
svn_index=3

#address=0x002E1000
[Ramdisk]
address=0xffa60000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/image-spi-clanton.cpio.lzma
sign=yes
type=mfh.ramdisk_signed
svn_index=7

[LAYOUT.CONF_DUMP]
address=0xffcff000
type=mfh.build_information
meta=layout

[Kernel]
address=0xff852000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/bzImage
sign=yes
type=mfh.kernel_signed
svn_index=6

[grub.conf]
address=0xff851000
item_file=grub/grub-ce.conf
sign=yes
type=mfh.bootloader_conf_signed
svn_index=5

[grub]
address=0xff800000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/grub.efi
sign=yes
fvwrap=yes
guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
type=mfh.bootloader_signed
svn_index=4

# strings -n 16 '/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv' | grep -i 'clanton.*version' | head | unix2dos
# Clanton RomCode Version
# Clanton Microcode Version a0_1_00_23

[Linux-EFI SPI, setup=0x1070, size=0x200620]
[Initrd SPI, addr=0xdd5f000, size=0x2647b1]
[   12.116540] console [ttyS1] enabled, bootconsole disabled
[   12.129506] Real Time Clock Driver v1.12b
[   12.147000] brd: module loaded
[   12.165934] loop: module loaded
[   12.171726] lpc_sch_probe BIOS_CNTL 0x00000101
[   12.176245] lpc_sch_probe new BIOS_CNTL 0x00000101
[   12.181226] lpc_sch_probe RCBA @ 0xfed1c000
[   12.208949] cpuidle: using governor ladder
[   12.213588] cpuidle: using governor menu
[   12.218788] sdhci: Secure Digital Host Controller Interface driver
[   12.225149] sdhci: Copyright(c) Pierre Ossman
[   12.230272] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
[   12.290251] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
[   12.303356] sdhci-pltfm: SDHCI platform and OF driver helper
[   12.334333] THRM: critical reset 104 c hot 95 c hardware failover 105 c
[   12.365591] TCP: cubic registered
[   12.368979] NET: Registered protocol family 17
[   12.374757] ... APIC ID:      00000000 (0)
[   12.378894] ... APIC VERSION: 00030010
[   12.382913] 0000000000000000000000000000000000000000000000000000000000000000
[   12.383517] 0000000000000000000000000000000000000000000000000000000000000000
[   12.383517] 0000000000000000000000000000000000000000000000000000000000008000
[   12.383517]
[   12.406758] testing the IO APIC.......................
[   12.414482] .................................... done.
[   12.419664] Using IPI Shortcut mode
[   12.438752]   Magic number: 2:694:579
[   12.442863] mem kmem: hash matches
[   12.446362] pci_bus 0000:00: hash matches
[   12.499538] Freeing unused kernel memory: 272k freed
[   12.507744] Write protecting the kernel text: 3100k
[   12.513918] Write protecting the kernel read-only data: 1284k
[   12.519718] NX-protecting the kernel data: 3044k
[   12.529337] Failed to execute /init
[   12.552953] tsc: Refined TSC clocksource calibration: 399.076 MHz
[   12.559287] Switching to clocksource tsc
INIT: version 2.88 booting
[   13.047510] g_serial: Vendor 0x8086 Product 0xbabe
[   13.053834] g_serial gadget: Gadget Serial v2.4
[   13.058484] g_serial gadget: g_serial ready
[   13.117857] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
[   13.125518] stmmac MSI mode enabled
[   13.128881] Vendor 0x8086 Device 0x0937
[   13.133228] stmmac - user ID: 0x10, Synopsys ID: 0x37
[   13.138332]  DMA HW capability register supported
[   13.143024]  Enhanced/Alternate descriptors
[   13.147450]  RX Checksum Offload Engine supported (type 2)
[   13.153094]  TX Checksum insertion supported
[   13.157414]  Enable RX Mitigation via HW Watchdog Timer
[   13.212757] libphy: stmmac: probed
[   13.216225] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
[   13.287358] ACPI: bus type usb registered
[   13.295194] usbcore: registered new interface driver usbfs
[   13.303058] usbcore: registered new interface driver hub
[   13.311291] usbcore: registered new device driver usb
[   13.326374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.381266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.388087] ohci_hcd 0000:00:14.4: OHCI Host Controller
[   13.395036] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
[   13.402933] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
[   13.480959] hub 1-0:1.0: USB hub found
[   13.485364] hub 1-0:1.0: 2 ports detected
[   13.543563] ehci-pci: EHCI PCI platform driver
[   13.548688] ehci-pci 0000:00:14.3: EHCI Host Controller
[   13.554707] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 2
[   13.563475] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   13.569028] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   13.574934] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
[   13.600227] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
[   13.612742] hub 2-0:1.0: USB hub found
[   13.616750] hub 2-0:1.0: 2 ports detected
[   13.680872] Initializing USB Mass Storage driver...
[   13.688055] usbcore: registered new interface driver usb-storage
[   13.694243] USB Mass Storage support registered.
[   13.830928] intel_cln_gpio_probe UIO addr 0x90006000 internal_addr 0x00000000 size 3765649408 memtype 4096
[   13.903760] cy8c9540a 0-0020: dev_id=0x40
[   14.062755] at24 0-0050: byte_len looks suspicious (no power of 2)!
[   14.069175] at24 0-0050: 11264 byte at24 EEPROM, writable, 1 bytes/write
[   14.123618] i2c /dev entries driver
[   14.287055] spi_pxa2xx_pci: `0' invalid for parameter `gpio_cs'
[   14.338515] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
[   14.348967] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
[   14.370323] spi_master spi0: will run message pump with realtime priority
[   14.387870] spi_master spi1: will run message pump with realtime priority
[   14.609964] cfg80211: Calling CRDA to update world regulatory domain
[   14.638493] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   14.644427] Copyright(c) 2003-2012 Intel Corporation
[   14.833170] Bluetooth: Core ver 2.16
[   14.838711] NET: Registered protocol family 31
[   14.843336] Bluetooth: HCI device and connection manager initialized
[   14.850507] Bluetooth: HCI socket layer initialized
[   14.855521] Bluetooth: L2CAP socket layer initialized
[   14.861000] Bluetooth: SCO socket layer initialized
[   14.875940] usbcore: registered new interface driver btusb
[   14.934110] usbcore: registered new interface driver usbhid
[   14.939736] usbhid: USB HID core driver
Starting Bootlog daemon: bootlogd.
Configuring network interfaces... [   17.882064] eth0: device MAC address 98:4f:ee:00:20:cf
udhcpc (v1.20.2) started
Sending discover...
[   19.880484] libphy: stmmac-1:01 - Link is Up - 100/Full
Sending discover...
Sending select for 192.168.0.114...
Lease of 192.168.0.114 obtained, lease time 268435455
/etc/udhcpc.d/50default: Adding DNS 192.168.0.1
done.
kernel.hotplug = /sbin/mdev
sh: %4Y%2m%2d%2H%2M: bad number
INIT: Entering runlevel: 5
Starting syslogd/klogd: done
Stopping Bootlog daemon: bootlogd.
/sketch/sketch.elf file does not exist or invalid permissions
clloader waiting to receive.
Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton /dev/ttyS1

clanton login: root
root@clanton:~# pwd
/home/root
root@clanton:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
devtmpfs                115544         0    115544   0% /dev
tmpfs                   116904       108    116796   0% /var/volatile
tmpfs                   116904         0    116904   0% /media/ram
root@clanton:~#

	Press [Enter] to directly boot.
	Press [F7] to show boot menu options.





































	GNU GRUB version 0.97 (604K lower / 245628K upper memory)

	+-------------------------------------------------------------------------+
	\| Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU \|
	\| Clanton SVP kernel-SPI rootfs-SD IMR-On IO-APIC/HPET NoEMU \|
	\| Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I> \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	+-------------------------------------------------------------------------+
	Use the ^ and v keys to select which entry is highlighted.
	Press enter to boot the selected OS, 'e' to edit the
	commands before booting, 'a' to modify the kernel arguments
	before booting, or 'c' for a command-line.

	The highlighted entry will be booted automatically in 1 seconds.

















	Found layout.conf @ 0xffcff000 len 0x00000d18
	#Generated by Buildbot - Sysimage 782
	#EXAMPLE LAYOUT.CONF FILE FOR FPGA/RELEASE

	# WARNING: this file is indirectly included in a Makefile where it
	# defines Make targets and pre-requisites. As a consequence you MUST
	# run "make clean" BEFORE making changes to it. Failure to do so may
	# result in the make process being unable to clean files it no longer
	# has references to.

	[main]
	size=8388608
	type=global


	[MFH]
	version=0x1
	flags=0x0
	address=0xfff08000
	type=mfh


	[Flash Image Version]
	type=mfh.version
	meta=version
	value=782

	[ROM_OVERLAY]
	address=0xfffe0000
	#item_file=/p/clanton/swbuilds/BootRom/Ver_1_00_09/Clanton.rom
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
	type=some_type
	# in_capsule=no

	[signed-key-module]
	address=0xfffd8000
	item_file=config/SvpSignedKeyModule.bin
	svn_index=0
	type=some_type

	[svn-area]
	address=0xfffd0000
	item_file=config/SVNArea.bin
	type=some_type

	[fixed_recovery_image]
	address=0xfff90000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
	sign=yes
	type=mfh.host_fw_stage1_signed
	svn_index=2
	# in_capsule=no

	[NV_Storage]
	address=0xfff30000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
	type=some_type

	[RMU]
	address=0xfff00000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
	type=none_registered

	[boot_stage1_image1]
	address=0xffec0000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
	sign=yes
	boot_index=0
	type=mfh.host_fw_stage1_signed
	svn_index=1

	[boot_stage1_image2]
	address=0xffe80000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
	sign=yes
	boot_index=1
	type=mfh.host_fw_stage1_signed
	svn_index=1

	[boot_stage_2_compact]
	address=0xffd00000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
	sign=yes
	type=mfh.host_fw_stage2_signed
	svn_index=3

	#address=0x002E1000
	[Ramdisk]
	address=0xffa60000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/image-spi-clanton.cpio.lzma
	sign=yes
	type=mfh.ramdisk_signed
	svn_index=7

	[LAYOUT.CONF_DUMP]
	address=0xffcff000
	type=mfh.build_information
	meta=layout

	[Kernel]
	address=0xff852000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/bzImage
	sign=yes
	type=mfh.kernel_signed
	svn_index=6

	[grub.conf]
	address=0xff851000
	item_file=grub/grub-ce.conf
	sign=yes
	type=mfh.bootloader_conf_signed
	svn_index=5

	[grub]
	address=0xff800000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/grub.efi
	sign=yes
	fvwrap=yes
	guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
	type=mfh.bootloader_signed
	svn_index=4

	# strings -n 16 '/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv' \| grep -i 'clanton.*version' \| head \| unix2dos
	# Clanton RomCode Version
	# Clanton Microcode Version a0_1_00_23

	[Linux-EFI, setup=0x1091, size=0x200540]
	[Initrd, addr=0xd9df000, size=0x15ff49]
	[ 2.801630] console [ttyS1] enabled, bootconsole disabled
	[ 2.814524] Real Time Clock Driver v1.12b
	[ 2.831887] brd: module loaded
	[ 2.850849] loop: module loaded
	[ 2.856513] lpc_sch_probe BIOS_CNTL 0x00000101
	[ 2.861163] lpc_sch_probe new BIOS_CNTL 0x00000101
	[ 2.866022] lpc_sch_probe RCBA @ 0xfed1c000
	[ 2.893841] cpuidle: using governor ladder
	[ 2.898011] cpuidle: using governor menu
	[ 2.903661] sdhci: Secure Digital Host Controller Interface driver
	[ 2.909895] sdhci: Copyright(c) Pierre Ossman
	[ 2.914986] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
	[ 2.970251] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
	[ 2.983782] sdhci-pltfm: SDHCI platform and OF driver helper
	[ 3.006169] THRM: critical reset 104 c hot 95 c hardware failover 105 c
	[ 3.034812] TCP: cubic registered
	[ 3.038199] NET: Registered protocol family 17
	[ 3.044714] ... APIC ID: 00000000 (0)
	[ 3.048851] ... APIC VERSION: 00030010
	[ 3.052737] 0000000000000000000000000000000000000000000000000000000000000000
	[ 3.052737] 0000000000000000000000000002000000000000000000000000000000000000
	[ 3.052737] 0000000000000000000000000000000000000000000000000000000000008000
	[ 3.052737]
	[ 3.076657] testing the IO APIC.......................
	[ 3.084353] .................................... done.
	[ 3.089534] Using IPI Shortcut mode
	[ 3.106710] Magic number: 2:797:680
	[ 3.123201] Freeing unused kernel memory: 272k freed
	[ 3.131336] Write protecting the kernel text: 3100k
	[ 3.137387] Write protecting the kernel read-only data: 1284k
	[ 3.143323] NX-protecting the kernel data: 3044k
	[ 3.166199] mmc0: new high speed SDHC card at address 1234
	[ 3.190761] mmcblk0: mmc0:1234 SA32G 29.3 GiB
	[ 3.226029] mmcblk0: p1
	[ 3.241085] tsc: Refined TSC clocksource calibration: 399.076 MHz
	[ 3.247419] Switching to clocksource tsc
	[ 3.373126] udevd[542]: starting version 182
	Waiting for removable media...
	5[ 9.105766] kjournald starting. Commit interval 5 seconds
	[ 9.112361] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
	[ 9.126277] EXT3-fs (loop0): using internal journal
	[ 9.151343] EXT3-fs (loop0): recovery complete
	[ 9.155847] EXT3-fs (loop0): mounted filesystem with writeback data mode
	INIT: version 2.88 booting
	mount: mounting devtmpfs on /dev failed: Device or resource busy
	[ 10.723077] g_serial: Vendor 0x8086 Product 0xbabe
	[ 10.728024] g_serial gadget: Gadget Serial v2.4
	[ 10.733164] g_serial gadget: g_serial ready
	[ 10.824284] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
	[ 10.831981] stmmac MSI mode enabled
	[ 10.835345] Vendor 0x8086 Device 0x0937
	[ 10.839583] stmmac - user ID: 0x10, Synopsys ID: 0x37
	[ 10.844811] DMA HW capability register supported
	[ 10.849390] Enhanced/Alternate descriptors
	[ 10.853927] RX Checksum Offload Engine supported (type 2)
	[ 10.859463] TX Checksum insertion supported
	[ 10.863887] Enable RX Mitigation via HW Watchdog Timer
	[ 10.925679] libphy: stmmac: probed
	[ 10.929148] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
	[ 11.037589] ACPI: bus type usb registered
	[ 11.045257] usbcore: registered new interface driver usbfs
	[ 11.053128] usbcore: registered new interface driver hub
	[ 11.061370] usbcore: registered new device driver usb
	[ 11.087542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 11.164626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	[ 11.172000] ohci_hcd 0000:00:14.4: OHCI Host Controller
	[ 11.178453] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
	[ 11.186321] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
	[ 11.272329] hub 1-0:1.0: USB hub found
	[ 11.276741] hub 1-0:1.0: 2 ports detected
	[ 11.355177] ehci-pci: EHCI PCI platform driver
	[ 11.360833] ehci-pci 0000:00:14.3: EHCI Host Controller
	[ 11.366254] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 2
	[ 11.375078] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
	[ 11.382068] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
	[ 11.389539] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
	[ 11.410249] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
	[ 11.422441] hub 2-0:1.0: USB hub found
	[ 11.426454] hub 2-0:1.0: 2 ports detected
	[ 11.521590] Initializing USB Mass Storage driver...
	[ 11.528705] usbcore: registered new interface driver usb-storage
	[ 11.534948] USB Mass Storage support registered.
	[ 11.735020] intel_cln_gpio_probe UIO addr 0x90006000 internal_addr 0x00000000 size 3765649408 memtype 4096
	[ 11.830262] cy8c9540a 0-0020: dev_id=0x40
	[ 12.014155] at24 0-0050: byte_len looks suspicious (no power of 2)!
	[ 12.021175] at24 0-0050: 11264 byte at24 EEPROM, writable, 1 bytes/write
	[ 12.090912] i2c /dev entries driver
	[ 12.311186] spi_pxa2xx_pci: `0' invalid for parameter `gpio_cs'
	[ 12.377473] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
	[ 12.387792] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
	[ 12.410267] spi_master spi0: will run message pump with realtime priority
	[ 12.429408] spi_master spi1: will run message pump with realtime priority
	[ 12.751758] cfg80211: Calling CRDA to update world regulatory domain
	[ 12.795332] Intel(R) Wireless WiFi driver for Linux, in-tree:
	[ 12.801264] Copyright(c) 2003-2012 Intel Corporation
	[ 13.067883] Bluetooth: Core ver 2.16
	[ 13.073258] NET: Registered protocol family 31
	[ 13.077756] Bluetooth: HCI device and connection manager initialized
	[ 13.085317] Bluetooth: HCI socket layer initialized
	[ 13.090446] Bluetooth: L2CAP socket layer initialized
	[ 13.095812] Bluetooth: SCO socket layer initialized
	[ 13.117996] usbcore: registered new interface driver btusb
	[ 13.201789] usbcore: registered new interface driver usbhid
	[ 13.207415] usbhid: USB HID core driver
	Starting Bootlog daemon: bootlogd.
	Configuring network interfaces... [ 16.383333] eth0: device MAC address 98:4f:ee:00:20:cf
	udhcpc (v1.20.2) started
	Sending discover...
	[ 18.390490] libphy: stmmac-1:01 - Link is Up - 100/Full
	Sending discover...
	Sending select for 192.168.0.114...
	Lease of 192.168.0.114 obtained, lease time 268435455
	/etc/udhcpc.d/50default: Adding DNS 192.168.0.1
	done.
	kernel.hotplug = /sbin/mdev
	/etc/rcS.d/S55bootmisc.sh: line 66: [: %4Y%2m%2d%2H%2M: integer expression expected
	INIT: Entering runlevel: 5
	Starting system message bus: dbus.
	Starting OpenBSD Secure Shell server: sshd
	done.
	Starting syslogd/klogd: [ 21.936624] NET: Registered protocol family 10
	done
	Stopping Bootlog daemon: bootlogd.

	Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton /dev/ttyS1

	clanton login: Sketch child process started, pid=01329
	Starting /sketch/sketch.elf /dev/pts/0 /dev/ttyS0
	root
	root@clanton:~# pwd
	/home/root
	root@clanton:~# df
	Filesystem 1K-blocks Used Available Use% Mounted on
	rootfs 302183 139141 147682 49% /
	none 116064 4 116060 0% /dev
	/dev/mmcblk0p1 30736384 313280 30423104 1% /media/realroot
	/dev/loop0 302183 139141 147682 49% /
	/dev/mmcblk0p1 30736384 313280 30423104 1% /media/mmcblk0p1
	tmpfs 116904 124 116780 0% /var/volatile
	tmpfs 116904 0 116904 0% /media/ram
	root@clanton:~#

	Press [Enter] to directly boot.
	Press [F7] to show boot menu options.
	do_load_config_file() error: cannot open GRUB configuration










































	GNU GRUB version 0.97 (604K lower / 245628K upper memory)

	+-------------------------------------------------------------------------+
	\| Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU \|
	\| Clanton SVP kernel-SPI initrd-MassStorage big-rootfs IMR-On IO-APIC/H> \|
	\| Clanton SVP kernel-MassStorage initrd-MassStorage small-rootfs IMR-On> \|
	\| Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I> \|
	\| Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I> \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	\| \|
	+-------------------------------------------------------------------------+
	Use the ^ and v keys to select which entry is highlighted.
	Press enter to boot the selected OS, 'e' to edit the
	commands before booting, 'a' to modify the kernel arguments
	before booting, or 'c' for a command-line.

	The highlighted entry will be booted automatically in 1 seconds.























	Found layout.conf @ 0xffcff000 len 0x00000d18
	#Generated by Buildbot - Sysimage 782
	#EXAMPLE LAYOUT.CONF FILE FOR FPGA/RELEASE

	# WARNING: this file is indirectly included in a Makefile where it
	# defines Make targets and pre-requisites. As a consequence you MUST
	# run "make clean" BEFORE making changes to it. Failure to do so may
	# result in the make process being unable to clean files it no longer
	# has references to.

	[main]
	size=8388608
	type=global


	[MFH]
	version=0x1
	flags=0x0
	address=0xfff08000
	type=mfh


	[Flash Image Version]
	type=mfh.version
	meta=version
	value=782

	[ROM_OVERLAY]
	address=0xfffe0000
	#item_file=/p/clanton/swbuilds/BootRom/Ver_1_00_09/Clanton.rom
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
	type=some_type
	# in_capsule=no

	[signed-key-module]
	address=0xfffd8000
	item_file=config/SvpSignedKeyModule.bin
	svn_index=0
	type=some_type

	[svn-area]
	address=0xfffd0000
	item_file=config/SVNArea.bin
	type=some_type

	[fixed_recovery_image]
	address=0xfff90000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
	sign=yes
	type=mfh.host_fw_stage1_signed
	svn_index=2
	# in_capsule=no

	[NV_Storage]
	address=0xfff30000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
	type=some_type

	[RMU]
	address=0xfff00000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
	type=none_registered

	[boot_stage1_image1]
	address=0xffec0000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
	sign=yes
	boot_index=0
	type=mfh.host_fw_stage1_signed
	svn_index=1

	[boot_stage1_image2]
	address=0xffe80000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
	sign=yes
	boot_index=1
	type=mfh.host_fw_stage1_signed
	svn_index=1

	[boot_stage_2_compact]
	address=0xffd00000
	item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
	sign=yes
	type=mfh.host_fw_stage2_signed
	svn_index=3

	#address=0x002E1000
	[Ramdisk]
	address=0xffa60000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/image-spi-clanton.cpio.lzma
	sign=yes
	type=mfh.ramdisk_signed
	svn_index=7

	[LAYOUT.CONF_DUMP]
	address=0xffcff000
	type=mfh.build_information
	meta=layout

	[Kernel]
	address=0xff852000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/bzImage
	sign=yes
	type=mfh.kernel_signed
	svn_index=6

	[grub.conf]
	address=0xff851000
	item_file=grub/grub-ce.conf
	sign=yes
	type=mfh.bootloader_conf_signed
	svn_index=5

	[grub]
	address=0xff800000
	item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/grub.efi
	sign=yes
	fvwrap=yes
	guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
	type=mfh.bootloader_signed
	svn_index=4

	# strings -n 16 '/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv' \| grep -i 'clanton.*version' \| head \| unix2dos
	# Clanton RomCode Version
	# Clanton Microcode Version a0_1_00_23

	[Linux-EFI SPI, setup=0x1070, size=0x200620]
	[Initrd SPI, addr=0xdd5f000, size=0x2647b1]
	[ 12.116540] console [ttyS1] enabled, bootconsole disabled
	[ 12.129506] Real Time Clock Driver v1.12b
	[ 12.147000] brd: module loaded
	[ 12.165934] loop: module loaded
	[ 12.171726] lpc_sch_probe BIOS_CNTL 0x00000101
	[ 12.176245] lpc_sch_probe new BIOS_CNTL 0x00000101
	[ 12.181226] lpc_sch_probe RCBA @ 0xfed1c000
	[ 12.208949] cpuidle: using governor ladder
	[ 12.213588] cpuidle: using governor menu
	[ 12.218788] sdhci: Secure Digital Host Controller Interface driver
	[ 12.225149] sdhci: Copyright(c) Pierre Ossman
	[ 12.230272] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
	[ 12.290251] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
	[ 12.303356] sdhci-pltfm: SDHCI platform and OF driver helper
	[ 12.334333] THRM: critical reset 104 c hot 95 c hardware failover 105 c
	[ 12.365591] TCP: cubic registered
	[ 12.368979] NET: Registered protocol family 17
	[ 12.374757] ... APIC ID: 00000000 (0)
	[ 12.378894] ... APIC VERSION: 00030010
	[ 12.382913] 0000000000000000000000000000000000000000000000000000000000000000
	[ 12.383517] 0000000000000000000000000000000000000000000000000000000000000000
	[ 12.383517] 0000000000000000000000000000000000000000000000000000000000008000
	[ 12.383517]
	[ 12.406758] testing the IO APIC.......................
	[ 12.414482] .................................... done.
	[ 12.419664] Using IPI Shortcut mode
	[ 12.438752] Magic number: 2:694:579
	[ 12.442863] mem kmem: hash matches
	[ 12.446362] pci_bus 0000:00: hash matches
	[ 12.499538] Freeing unused kernel memory: 272k freed
	[ 12.507744] Write protecting the kernel text: 3100k
	[ 12.513918] Write protecting the kernel read-only data: 1284k
	[ 12.519718] NX-protecting the kernel data: 3044k
	[ 12.529337] Failed to execute /init
	[ 12.552953] tsc: Refined TSC clocksource calibration: 399.076 MHz
	[ 12.559287] Switching to clocksource tsc
	INIT: version 2.88 booting
	[ 13.047510] g_serial: Vendor 0x8086 Product 0xbabe
	[ 13.053834] g_serial gadget: Gadget Serial v2.4
	[ 13.058484] g_serial gadget: g_serial ready
	[ 13.117857] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
	[ 13.125518] stmmac MSI mode enabled
	[ 13.128881] Vendor 0x8086 Device 0x0937
	[ 13.133228] stmmac - user ID: 0x10, Synopsys ID: 0x37
	[ 13.138332] DMA HW capability register supported
	[ 13.143024] Enhanced/Alternate descriptors
	[ 13.147450] RX Checksum Offload Engine supported (type 2)
	[ 13.153094] TX Checksum insertion supported
	[ 13.157414] Enable RX Mitigation via HW Watchdog Timer
	[ 13.212757] libphy: stmmac: probed
	[ 13.216225] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
	[ 13.287358] ACPI: bus type usb registered
	[ 13.295194] usbcore: registered new interface driver usbfs
	[ 13.303058] usbcore: registered new interface driver hub
	[ 13.311291] usbcore: registered new device driver usb
	[ 13.326374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 13.381266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	[ 13.388087] ohci_hcd 0000:00:14.4: OHCI Host Controller
	[ 13.395036] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
	[ 13.402933] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
	[ 13.480959] hub 1-0:1.0: USB hub found
	[ 13.485364] hub 1-0:1.0: 2 ports detected
	[ 13.543563] ehci-pci: EHCI PCI platform driver
	[ 13.548688] ehci-pci 0000:00:14.3: EHCI Host Controller
	[ 13.554707] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 2
	[ 13.563475] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
	[ 13.569028] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
	[ 13.574934] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
	[ 13.600227] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
	[ 13.612742] hub 2-0:1.0: USB hub found
	[ 13.616750] hub 2-0:1.0: 2 ports detected
	[ 13.680872] Initializing USB Mass Storage driver...
	[ 13.688055] usbcore: registered new interface driver usb-storage
	[ 13.694243] USB Mass Storage support registered.
	[ 13.830928] intel_cln_gpio_probe UIO addr 0x90006000 internal_addr 0x00000000 size 3765649408 memtype 4096
	[ 13.903760] cy8c9540a 0-0020: dev_id=0x40
	[ 14.062755] at24 0-0050: byte_len looks suspicious (no power of 2)!
	[ 14.069175] at24 0-0050: 11264 byte at24 EEPROM, writable, 1 bytes/write
	[ 14.123618] i2c /dev entries driver
	[ 14.287055] spi_pxa2xx_pci: `0' invalid for parameter `gpio_cs'
	[ 14.338515] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
	[ 14.348967] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
	[ 14.370323] spi_master spi0: will run message pump with realtime priority
	[ 14.387870] spi_master spi1: will run message pump with realtime priority
	[ 14.609964] cfg80211: Calling CRDA to update world regulatory domain
	[ 14.638493] Intel(R) Wireless WiFi driver for Linux, in-tree:
	[ 14.644427] Copyright(c) 2003-2012 Intel Corporation
	[ 14.833170] Bluetooth: Core ver 2.16
	[ 14.838711] NET: Registered protocol family 31
	[ 14.843336] Bluetooth: HCI device and connection manager initialized
	[ 14.850507] Bluetooth: HCI socket layer initialized
	[ 14.855521] Bluetooth: L2CAP socket layer initialized
	[ 14.861000] Bluetooth: SCO socket layer initialized
	[ 14.875940] usbcore: registered new interface driver btusb
	[ 14.934110] usbcore: registered new interface driver usbhid
	[ 14.939736] usbhid: USB HID core driver
	Starting Bootlog daemon: bootlogd.
	Configuring network interfaces... [ 17.882064] eth0: device MAC address 98:4f:ee:00:20:cf
	udhcpc (v1.20.2) started
	Sending discover...
	[ 19.880484] libphy: stmmac-1:01 - Link is Up - 100/Full
	Sending discover...
	Sending select for 192.168.0.114...
	Lease of 192.168.0.114 obtained, lease time 268435455
	/etc/udhcpc.d/50default: Adding DNS 192.168.0.1
	done.
	kernel.hotplug = /sbin/mdev
	sh: %4Y%2m%2d%2H%2M: bad number
	INIT: Entering runlevel: 5
	Starting syslogd/klogd: done
	Stopping Bootlog daemon: bootlogd.
	/sketch/sketch.elf file does not exist or invalid permissions
	clloader waiting to receive.
	Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton /dev/ttyS1

	clanton login: root
	root@clanton:~# pwd
	/home/root
	root@clanton:~# df
	Filesystem 1K-blocks Used Available Use% Mounted on
	devtmpfs 115544 0 115544 0% /dev
	tmpfs 116904 108 116796 0% /var/volatile
	tmpfs 116904 0 116904 0% /media/ram
	root@clanton:~#