Created
August 14, 2014 16:59
-
-
Save hyperair/f873319fdaf27ff65078 to your computer and use it in GitHub Desktop.
This file has been truncated, but you can view the full file.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ; generated by Slic3r 1.2.0 on 2014-08-15 at 00:46:56 | |
| ; external perimeters extrusion width = 0.40mm | |
| ; perimeters extrusion width = 0.60mm | |
| ; infill extrusion width = 0.60mm | |
| ; solid infill extrusion width = 0.60mm | |
| ; top infill extrusion width = 0.40mm | |
| ; support material extrusion width = 0.40mm | |
| G21 ; set units to millimeters | |
| M127 ; disable fan | |
| M109 S70 ; wait for bed temperature to be reached | |
| M135 T1; set primary extruder | |
| M73 P0; enable show build progress | |
| M109 S70 ; heat bed up to first layer temperature | |
| M104 S190 T1; set nozzle heater to first layer temperature | |
| M103; disable RPM | |
| G21; set units to mm | |
| G162 X Y F6000; home XY axes maximum | |
| G161 Z F9000; home Z axis minimum | |
| G92 Z0; set Z to 0 | |
| M132 X Y Z A B; Recall stored home offsets | |
| G90; set positioning to absolute | |
| G1 Z30; move Z to waiting height | |
| G1 X-95 Y-73 Z30 F14000; move to waiting position (front left corner of print bed) | |
| G130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating | |
| M6 T1; wait for bed and extruder to heat up | |
| G130 X127 Y127 A127 B127; set stepper motor vref to defaults | |
| M108 T1 R3; set extruder speed | |
| G92 E0; set E to 0 | |
| G90; use absolute coordinates | |
| M320; acceleration enabled for all commands that follow | |
| G1 Z0.3 F6000.000; move to first layer height | |
| G1 X100 Y-73 F14000.000; move to front right corner of bed | |
| G1 X-90 Y-73 E24 F2000.000; extrude a line of filament across the front edge of the bed | |
| G4 P2000; wait for ooze to slow | |
| G1 Z0 F6000.000; lower nozzle height to 0 | |
| G1 X-95; wipe nozzle | |
| G1 Z0.3 F6000.000; set nozzle to first layer height | |
| G1 F12000; ensure fast travel to first print move | |
| G92 E0; set E to 0 again | |
| M73 P0; reset build progress to 0 | |
| G90 ; use absolute coordinates | |
| M73 P0 ; update progress | |
| G1 F2100.000 E-5.00000 ; retract | |
| G1 Z0.500 F7800.000 ; move to next layer (0) and lift | |
| G1 X-5.690 Y-14.752 F7800.000 ; move to first skirt point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E0.00000 F2100.000 ; compensate retraction | |
| G1 X3.457 Y-18.279 E0.80950 F600.000 ; skirt | |
| G1 X5.881 Y-18.731 E1.01309 ; skirt | |
| G1 X8.079 Y-18.731 E1.19467 ; skirt | |
| G1 X10.358 Y-18.334 E1.38564 ; skirt | |
| G1 X12.402 Y-17.161 E1.58021 F600.000 ; skirt | |
| G1 X24.342 Y-7.171 E2.86578 ; skirt | |
| G1 X25.835 Y-5.405 E3.05676 ; skirt | |
| G1 X26.412 Y-4.128 E3.17243 ; skirt | |
| G1 X27.932 Y0.448 E3.57059 ; skirt | |
| G1 X28.276 Y2.571 E3.74820 ; skirt | |
| G1 X28.276 Y13.353 E4.63853 ; skirt | |
| G1 X27.879 Y15.631 E4.82950 ; skirt | |
| G1 X26.734 Y17.641 E5.02047 ; skirt | |
| G1 X24.978 Y19.145 E5.21144 ; skirt | |
| G1 X22.135 Y20.062 E5.45807 ; skirt | |
| G1 X19.714 Y20.251 E5.65864 ; skirt | |
| G1 X-10.670 Y20.251 E8.16757 ; skirt | |
| G1 X-19.049 Y20.205 E8.85950 ; skirt | |
| G1 X-22.323 Y19.822 E9.13172 ; skirt | |
| G1 X-24.540 Y19.162 E9.32269 ; skirt | |
| G1 X-26.403 Y17.792 E9.51366 ; skirt | |
| G1 X-27.693 Y15.872 E9.70463 ; skirt | |
| G1 X-28.276 Y13.132 E9.93600 ; skirt | |
| G1 X-28.276 Y2.350 E10.82633 ; skirt | |
| G1 X-27.899 Y0.130 E11.01224 ; skirt | |
| G1 X-26.379 Y-4.225 E11.39310 ; skirt | |
| G1 X-25.254 Y-6.245 E11.58407 ; skirt | |
| G1 X-23.511 Y-7.765 E11.77504 ; skirt | |
| G1 X-22.444 Y-8.289 E11.87321 ; skirt | |
| G1 X-5.746 Y-14.730 E13.35108 ; skirt | |
| G1 F2100.000 E8.35108 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X5.513 Y-12.147 F7800.000 ; move to first brim point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E13.35108 F2100.000 ; compensate retraction | |
| G1 X5.728 Y-12.363 E13.37624 F600.000 ; brim | |
| G1 X8.232 Y-12.363 E13.58298 ; brim | |
| G1 X8.447 Y-12.147 E13.60814 ; brim | |
| G1 X8.447 Y-2.804 E14.37969 ; brim | |
| G1 X8.878 Y-2.373 E14.43001 ; brim | |
| G1 X20.172 Y-2.373 E15.36263 ; brim | |
| G1 X20.388 Y-2.157 E15.38780 ; brim | |
| G1 X20.388 Y1.423 E15.68341 ; brim | |
| G1 X20.866 Y1.860 E15.73691 ; brim | |
| G1 X21.624 Y1.793 E15.79976 ; brim | |
| G1 X21.858 Y1.988 E15.82492 ; brim | |
| G1 X21.893 Y2.392 E15.85839 ; brim | |
| G1 X22.016 Y2.639 E15.88116 ; brim | |
| G1 X22.245 Y2.850 E15.90689 ; brim | |
| G1 X22.308 Y2.991 E15.91967 ; brim | |
| G1 X22.308 Y6.963 E16.24767 ; brim | |
| G1 X22.322 Y7.035 E16.25371 ; brim | |
| G1 X22.262 Y8.208 E16.35070 ; brim | |
| G1 X22.291 Y8.359 E16.36335 ; brim | |
| G1 X22.313 Y9.574 E16.46374 ; brim | |
| G1 X22.308 Y12.230 E16.68300 ; brim | |
| G1 X22.258 Y12.358 E16.69439 ; brim | |
| G1 X22.028 Y12.609 E16.72246 ; brim | |
| G1 X21.929 Y12.902 E16.74803 ; brim | |
| G1 X21.962 Y13.271 E16.77857 ; brim | |
| G1 X21.915 Y13.419 E16.79142 ; brim | |
| G1 X21.955 Y13.871 E16.82886 ; brim | |
| G1 X21.760 Y14.104 E16.85402 ; brim | |
| G1 X19.630 Y14.293 E17.03059 ; brim | |
| G1 X18.927 Y13.682 E17.10753 ; brim | |
| G1 X12.034 Y14.293 E17.67894 ; brim | |
| G1 X11.331 Y13.682 E17.75589 ; brim | |
| G1 X4.438 Y14.293 E18.32729 ; brim | |
| G1 X3.735 Y13.682 E18.40424 ; brim | |
| G1 X-3.158 Y14.293 E18.97565 ; brim | |
| G1 X-3.861 Y13.682 E19.05260 ; brim | |
| G1 X-10.754 Y14.293 E19.62400 ; brim | |
| G1 X-11.457 Y13.682 E19.70095 ; brim | |
| G1 X-18.350 Y14.293 E20.27235 ; brim | |
| G1 X-19.053 Y13.682 E20.34930 ; brim | |
| G1 X-21.624 Y13.910 E20.56244 ; brim | |
| G1 X-21.858 Y13.714 E20.58760 ; brim | |
| G1 X-21.893 Y13.311 E20.62108 ; brim | |
| G1 X-22.016 Y13.063 E20.64385 ; brim | |
| G1 X-22.245 Y12.853 E20.66957 ; brim | |
| G1 X-22.308 Y12.711 E20.68236 ; brim | |
| G1 X-22.308 Y11.559 E20.77747 ; brim | |
| G1 X-22.186 Y11.245 E20.80533 ; brim | |
| G1 X-22.192 Y10.952 E20.82949 ; brim | |
| G1 X-22.308 Y10.690 E20.85320 ; brim | |
| G1 X-22.308 Y9.538 E20.94831 ; brim | |
| G1 X-22.258 Y9.409 E20.95970 ; brim | |
| G1 X-22.028 Y9.159 E20.98778 ; brim | |
| G1 X-21.929 Y8.865 E21.01334 ; brim | |
| G1 X-21.958 Y8.534 E21.04081 ; brim | |
| G1 X-22.081 Y8.287 E21.06359 ; brim | |
| G1 X-22.245 Y8.136 E21.08203 ; brim | |
| G1 X-22.308 Y7.994 E21.09481 ; brim | |
| G1 X-22.308 Y2.799 E21.52379 ; brim | |
| G1 X-22.258 Y2.671 E21.53518 ; brim | |
| G1 X-22.028 Y2.420 E21.56326 ; brim | |
| G1 X-21.929 Y2.126 E21.58883 ; brim | |
| G1 X-21.955 Y1.832 E21.61325 ; brim | |
| G1 X-21.760 Y1.598 E21.63841 ; brim | |
| G1 X-20.774 Y1.511 E21.72014 ; brim | |
| G1 X-20.388 Y1.089 E21.76734 ; brim | |
| G1 X-20.388 Y-2.157 E22.03542 ; brim | |
| G1 X-20.172 Y-2.373 E22.06058 ; brim | |
| G1 X5.082 Y-2.373 E24.14595 ; brim | |
| G1 X5.513 Y-2.804 E24.19627 ; brim | |
| G1 X5.513 Y-12.087 E24.96287 ; brim | |
| G1 F2100.000 E19.96287 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X5.513 Y3.363 F7800.000 ; move to first brim point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E24.96287 F2100.000 ; compensate retraction | |
| G1 X7.710 Y3.363 E25.14429 F600.000 ; brim | |
| G1 X8.142 Y4.051 E25.21143 F600.000 ; brim | |
| G1 X7.571 Y5.268 E25.32246 ; brim | |
| G1 X7.537 Y5.308 E25.32676 ; brim | |
| G1 X6.987 Y6.449 E25.43137 ; brim | |
| G1 X7.007 Y6.705 E25.45258 ; brim | |
| G1 X6.617 Y7.167 E25.50253 ; brim | |
| G1 X6.095 Y7.214 E25.54582 ; brim | |
| G1 X5.510 Y7.939 E25.62277 ; brim | |
| G1 X3.167 Y8.147 E25.81703 ; brim | |
| G1 X2.464 Y7.536 E25.89398 ; brim | |
| G1 X1.685 Y7.605 E25.95849 ; brim | |
| G1 X0.982 Y6.993 E26.03543 ; brim | |
| G1 X-5.910 Y7.605 E26.60684 ; brim | |
| G1 X-6.614 Y6.993 E26.68379 ; brim | |
| G1 X-6.901 Y7.019 E26.70760 ; brim | |
| G1 X-7.379 Y6.581 E26.76110 ; brim | |
| G1 X-7.379 Y4.277 E26.95136 ; brim | |
| G1 X-7.488 Y4.030 E26.97365 ; brim | |
| G1 X-7.052 Y3.363 E27.03945 ; brim | |
| G1 X5.453 Y3.363 E28.07205 ; brim | |
| G1 F2100.000 E23.07205 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X6.281 Y-1.605 F7800.000 ; move to first perimeter point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E28.07205 F2100.000 ; compensate retraction | |
| G1 X6.281 Y-11.595 E28.89698 F600.000 ; perimeter | |
| G1 X7.679 Y-11.595 E29.01249 ; perimeter | |
| G1 X7.679 Y-1.605 E29.83742 ; perimeter | |
| G1 X19.620 Y-1.605 E30.82342 ; perimeter | |
| G1 X19.620 Y2.595 E31.17023 ; perimeter | |
| G1 X-19.620 Y2.595 E34.41050 ; perimeter | |
| G1 X-19.620 Y-1.605 E34.75731 ; perimeter | |
| G1 X6.221 Y-1.605 E36.89111 ; perimeter | |
| G1 X6.681 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X18.884 Y-0.869 F7800.000 ; move to first perimeter point | |
| G1 X18.884 Y1.859 E37.11644 F600.000 ; perimeter | |
| G1 X-18.884 Y1.859 E40.23521 ; perimeter | |
| G1 X-18.884 Y-0.869 E40.46054 ; perimeter | |
| G1 X18.824 Y-0.869 E43.57435 ; perimeter | |
| G1 X18.149 Y-0.134 F7800.000 ; move to first perimeter point | |
| G1 X18.149 Y1.124 E43.67820 F600.000 ; perimeter | |
| G1 X-18.149 Y1.124 E46.67548 ; perimeter | |
| G1 X-18.149 Y-0.134 E46.77932 ; perimeter | |
| G1 X18.089 Y-0.134 E49.77165 ; perimeter | |
| G1 X17.781 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.781 Y0.495 E51.11142 F600.000 ; fill | |
| G1 X6.980 Y-1.237 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-11.227 E51.48778 F600.000 ; fill | |
| M73 P0 ; update progress | |
| G1 F2100.000 E46.48778 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X9.179 Y3.668 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E51.48778 F2100.000 ; compensate retraction | |
| G1 X10.223 Y3.575 E51.52725 F600.000 ; support material | |
| G1 F2100.000 E46.52725 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X14.150 Y3.900 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E51.52725 F2100.000 ; compensate retraction | |
| G1 X8.840 Y4.372 E51.72807 F600.000 ; support material | |
| G1 X8.501 Y5.075 E51.75751 ; support material | |
| G1 X14.150 Y4.574 E51.97116 ; support material | |
| G1 X14.150 Y5.248 E51.99655 ; support material | |
| G1 X8.162 Y5.779 E52.22302 ; support material | |
| G1 X7.823 Y6.483 E52.25246 ; support material | |
| G1 X14.150 Y5.922 E52.49175 ; support material | |
| G1 X14.150 Y6.596 E52.51714 ; support material | |
| G1 X7.484 Y7.187 E52.76926 ; support material | |
| G1 X7.598 Y8.525 F7800.000 ; move to first support material point | |
| G1 X-21.540 Y11.110 E53.87131 F600.000 ; support material | |
| G1 X-21.540 Y9.088 F7800.000 ; move to first support material point | |
| G1 X-15.190 Y8.525 E54.11149 F600.000 ; support material | |
| G1 X-15.850 Y7.910 F7800.000 ; move to first support material point | |
| G1 X-16.474 Y7.965 E54.13507 F600.000 ; support material | |
| G1 X-15.850 Y7.236 E54.17121 ; support material | |
| G1 X-21.540 Y7.741 E54.38642 ; support material | |
| G1 X-21.540 Y7.067 E54.41181 ; support material | |
| G1 X-15.850 Y6.562 E54.62702 ; support material | |
| G1 X-15.850 Y5.888 E54.65241 ; support material | |
| G1 X-21.540 Y6.393 E54.86761 ; support material | |
| G1 X-21.540 Y5.719 E54.89300 ; support material | |
| G1 X-15.850 Y5.214 E55.10821 ; support material | |
| G1 X-15.850 Y4.540 E55.13360 ; support material | |
| G1 X-21.540 Y5.045 E55.34881 ; support material | |
| G1 X-21.540 Y4.371 E55.37419 ; support material | |
| G1 X-15.850 Y3.866 E55.58940 ; support material | |
| G1 X-15.090 Y3.799 F7800.000 ; move to first support material point | |
| G1 X-12.565 Y3.575 E55.68491 F600.000 ; support material | |
| G1 X-8.245 Y3.866 F7800.000 ; move to first support material point | |
| G1 X-15.090 Y4.473 E55.94380 F600.000 ; support material | |
| G1 X-15.090 Y5.147 E55.96919 ; support material | |
| G1 X-8.147 Y4.531 E56.23180 ; support material | |
| G1 X-8.147 Y5.205 E56.25719 ; support material | |
| G1 X-15.090 Y5.821 E56.51981 ; support material | |
| G1 X-15.090 Y6.495 E56.54520 ; support material | |
| G1 X-8.147 Y5.879 E56.80781 ; support material | |
| G1 X-8.147 Y6.552 E56.83320 ; support material | |
| G1 X-15.090 Y7.168 E57.09581 ; support material | |
| G1 X-15.090 Y7.842 E57.12120 ; support material | |
| G1 X-8.147 Y7.226 E57.38382 ; support material | |
| G1 X-8.878 Y7.965 E57.42297 ; support material | |
| G1 X-6.698 Y7.772 E57.50543 ; support material | |
| G1 X-7.594 Y8.525 F7800.000 ; move to first support material point | |
| G1 X-21.540 Y9.762 E58.03290 F600.000 ; support material | |
| G1 X-21.540 Y10.436 E58.05829 ; support material | |
| G1 X2.380 Y8.314 E58.96298 ; support material | |
| G1 X0.898 Y7.772 F7800.000 ; move to first support material point | |
| G1 X-5.290 Y8.321 E59.19704 F600.000 ; support material | |
| G1 X-3.074 Y13.515 F7800.000 ; move to first support material point | |
| G1 X21.540 Y11.331 E60.12800 F600.000 ; support material | |
| G1 X21.540 Y12.005 E60.15338 ; support material | |
| G1 X4.522 Y13.515 E60.79705 ; support material | |
| G1 F2100.000 E55.79705 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X6.314 Y7.965 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E60.79705 F2100.000 ; compensate retraction | |
| G1 X14.150 Y7.270 E61.09342 F600.000 ; support material | |
| G1 X13.910 Y7.965 E61.12112 ; support material | |
| G1 X14.150 Y7.944 E61.13020 ; support material | |
| G1 X15.194 Y8.525 F7800.000 ; move to first support material point | |
| G1 X-21.540 Y11.784 E62.51955 F600.000 ; support material | |
| G1 X-21.540 Y12.458 E62.54494 ; support material | |
| G1 X21.528 Y8.637 E64.17387 ; support material | |
| G1 X21.540 Y9.310 E64.19922 ; support material | |
| G1 X-21.540 Y13.132 E65.82860 ; support material | |
| G1 X-18.266 Y13.515 F7800.000 ; move to first support material point | |
| G1 X21.540 Y9.984 E67.33415 F600.000 ; support material | |
| G1 X21.540 Y10.657 E67.35954 ; support material | |
| G1 X-10.670 Y13.515 E68.57779 ; support material | |
| G1 F2100.000 E63.57779 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X-20.161 Y3.575 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E68.57779 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.697 E68.62995 F600.000 ; support material | |
| G1 X-21.540 Y3.023 E68.65534 ; support material | |
| G1 X-20.600 Y2.940 E68.69089 ; support material | |
| G1 X-20.699 Y2.275 E68.71623 ; support material | |
| G1 X-21.540 Y2.350 E68.74804 ; support material | |
| G1 F2100.000 E63.74804 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X12.118 Y13.515 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E68.74804 F2100.000 ; compensate retraction | |
| G1 X21.540 Y12.679 E69.10441 F600.000 ; support material | |
| G1 X21.540 Y13.353 F7800.000 ; move to first support material point | |
| G1 X19.714 Y13.515 E69.17349 F600.000 ; support material | |
| G1 F2100.000 E64.17349 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X21.540 Y7.962 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E69.17349 F2100.000 ; compensate retraction | |
| G1 X21.506 Y7.965 E69.17478 F600.000 ; support material | |
| G1 X21.540 Y7.288 E69.20031 ; support material | |
| G1 X14.910 Y7.876 E69.45107 ; support material | |
| G1 X14.910 Y7.202 E69.47646 ; support material | |
| G1 X21.540 Y6.614 E69.72722 ; support material | |
| G1 X21.540 Y5.940 E69.75261 ; support material | |
| G1 X14.910 Y6.529 E70.00337 ; support material | |
| G1 X14.910 Y5.855 E70.02876 ; support material | |
| G1 X21.540 Y5.266 E70.27952 ; support material | |
| G1 X21.540 Y4.593 E70.30491 ; support material | |
| G1 X14.910 Y5.181 E70.55567 ; support material | |
| G1 X14.910 Y4.507 E70.58106 ; support material | |
| G1 X21.540 Y3.919 E70.83182 ; support material | |
| G1 X21.540 Y3.245 E70.85720 ; support material | |
| G1 X20.600 Y3.328 E70.89276 ; support material | |
| G1 X20.600 Y2.654 E70.91815 ; support material | |
| G1 X21.540 Y2.571 E70.95370 ; support material | |
| G1 F2100.000 E65.95370 ; retract | |
| G1 Z0.500 F7800.000 ; lift plate during travel | |
| G1 X17.819 Y3.575 F7800.000 ; move to first support material point | |
| G1 Z0.300 F7800.000 ; restore layer Z | |
| G1 E70.95370 F2100.000 ; compensate retraction | |
| G1 X14.910 Y3.833 E71.06371 F600.000 ; support material | |
| M126 ; enable fan | |
| M73 P0 ; update progress | |
| G1 F2100.000 E66.06371 ; retract | |
| G1 Z0.600 F7800.000 ; move to next layer (1) and lift | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E71.06371 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E71.07504 F600.000 ; support material | |
| G1 X9.236 Y3.595 E71.09407 ; support material | |
| G1 X8.851 Y4.395 E71.10665 ; support material | |
| G1 X10.580 Y4.395 E71.13113 ; support material | |
| G1 F2100.000 E66.13113 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E71.13113 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E71.19472 F600.000 ; support material | |
| G1 X9.147 Y10.389 E71.21830 ; support material | |
| G1 X7.589 Y12.912 E71.26030 ; support material | |
| G1 X5.281 Y12.844 E71.29301 ; support material | |
| G1 X5.112 Y13.116 E71.29755 ; support material | |
| G1 X7.914 Y13.116 E71.33723 ; support material | |
| G1 X9.469 Y10.588 E71.37927 ; support material | |
| G1 X11.777 Y10.656 E71.41198 ; support material | |
| G1 X12.847 Y8.924 E71.44082 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E71.48573 F600.000 ; support material | |
| G1 X12.099 Y10.855 E71.51788 ; support material | |
| G1 X13.195 Y12.888 E71.55059 ; support material | |
| G1 X13.054 Y13.116 E71.55439 ; support material | |
| G1 X13.498 Y13.116 E71.56069 ; support material | |
| G1 X13.517 Y13.087 E71.56119 ; support material | |
| G1 X14.519 Y13.116 E71.57539 ; support material | |
| G1 X15.849 Y13.116 E71.59423 ; support material | |
| G1 X17.383 Y10.632 E71.63558 ; support material | |
| G1 X16.462 Y8.924 E71.66307 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E71.67327 F600.000 ; support material | |
| G1 X20.013 Y10.899 E71.70370 ; support material | |
| G1 X17.705 Y10.831 E71.73641 ; support material | |
| G1 X16.294 Y13.116 E71.77445 ; support material | |
| G1 X21.141 Y13.116 E71.84312 ; support material | |
| G1 X21.141 Y12.595 E71.85051 ; support material | |
| G1 X20.335 Y11.098 E71.87459 ; support material | |
| G1 X21.141 Y9.792 E71.89633 ; support material | |
| G1 F2100.000 E66.89633 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E71.89633 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E71.90766 F600.000 ; support material | |
| G1 X18.480 Y3.595 E71.93740 ; support material | |
| G1 X18.480 Y4.395 E71.94873 ; support material | |
| G1 X20.580 Y4.395 E71.97848 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E71.97909 F600.000 ; support material | |
| G1 X18.859 Y3.974 E71.99811 ; support material | |
| G1 X18.859 Y4.016 E71.99872 ; support material | |
| G1 X20.201 Y4.016 E72.01774 ; support material | |
| G1 F2100.000 E67.01774 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E72.01774 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E72.02404 F600.000 ; support material | |
| G1 X3.541 Y10.413 E72.04883 ; support material | |
| G1 X1.233 Y10.345 E72.08154 ; support material | |
| G1 X-0.325 Y12.868 E72.12354 ; support material | |
| G1 X-0.191 Y13.116 E72.12754 ; support material | |
| G1 X4.668 Y13.116 E72.19635 ; support material | |
| G1 X4.959 Y12.645 E72.20420 ; support material | |
| G1 X3.863 Y10.612 E72.23691 ; support material | |
| G1 X4.906 Y8.924 E72.26501 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E72.27686 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E72.38846 ; support material | |
| G1 X-5.270 Y8.545 E72.39913 ; support material | |
| G1 X-21.520 Y8.545 E72.62930 ; support material | |
| G1 X-21.520 Y13.495 E72.69941 ; support material | |
| G1 X21.520 Y13.495 E73.30903 ; support material | |
| G1 X21.520 Y8.545 E73.37914 ; support material | |
| G1 X2.246 Y8.545 E73.65214 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E73.68393 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E73.72446 ; support material | |
| G1 X-4.372 Y10.369 E73.76106 ; support material | |
| G1 X-3.277 Y12.402 E73.79377 ; support material | |
| G1 X-3.718 Y13.116 E73.80566 ; support material | |
| G1 X-3.273 Y13.116 E73.81196 ; support material | |
| G1 X-2.955 Y12.601 E73.82054 ; support material | |
| G1 X-0.647 Y12.669 E73.85325 ; support material | |
| G1 X0.911 Y10.146 E73.89525 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E73.92854 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E73.94882 ; support material | |
| G1 X-4.891 Y8.924 E73.95949 ; support material | |
| G1 X-7.853 Y8.924 E74.00143 ; support material | |
| G1 X-7.325 Y9.903 E74.01719 ; support material | |
| G1 X-8.883 Y12.426 E74.05919 ; support material | |
| G1 X-11.191 Y12.358 E74.09190 ; support material | |
| G1 X-11.659 Y13.116 E74.10452 ; support material | |
| G1 X-8.296 Y13.116 E74.15217 ; support material | |
| G1 X-8.561 Y12.625 E74.16008 ; support material | |
| G1 X-7.003 Y10.102 E74.20207 ; support material | |
| G1 X-4.695 Y10.170 E74.23478 ; support material | |
| G1 F2100.000 E69.23478 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E74.23478 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E74.24611 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E74.27586 ; support material | |
| G1 X-11.520 Y4.395 E74.28719 ; support material | |
| G1 X-9.420 Y4.395 E74.31693 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E74.31754 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E74.33656 ; support material | |
| G1 X-11.141 Y4.016 E74.33717 ; support material | |
| G1 X-9.799 Y4.016 E74.35619 ; support material | |
| G1 F2100.000 E69.35619 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E74.35619 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E74.37621 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E74.38251 ; support material | |
| G1 X-12.930 Y9.927 E74.39921 ; support material | |
| G1 X-15.239 Y9.859 E74.43192 ; support material | |
| G1 X-16.796 Y12.382 E74.47392 ; support material | |
| G1 X-16.401 Y13.116 E74.48574 ; support material | |
| G1 X-12.104 Y13.116 E74.54659 ; support material | |
| G1 X-11.513 Y12.159 E74.56253 ; support material | |
| G1 X-12.608 Y10.126 E74.59524 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E74.60709 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E74.66792 ; support material | |
| G1 X-20.844 Y9.883 E74.68389 ; support material | |
| G1 X-19.749 Y11.916 E74.71660 ; support material | |
| G1 X-20.490 Y13.116 E74.73658 ; support material | |
| G1 X-20.045 Y13.116 E74.74288 ; support material | |
| G1 X-19.427 Y12.115 E74.75955 ; support material | |
| G1 X-17.119 Y12.183 E74.79226 ; support material | |
| G1 X-15.561 Y9.660 E74.83426 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E74.84624 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E74.85254 ; support material | |
| G1 X-21.141 Y9.644 E74.86274 ; support material | |
| G1 F2100.000 E69.86274 ; retract | |
| G1 Z0.600 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E74.86274 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E74.86904 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E74.86976 ; support material | |
| G1 X-20.018 Y4.016 E74.87606 ; support material | |
| G1 X-19.991 Y3.974 E74.87677 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E74.89519 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E74.90793 ; support material | |
| G1 X-21.520 Y4.395 E74.93768 ; support material | |
| G1 X-19.420 Y4.395 E74.96742 ; support material | |
| G1 X-19.420 Y3.595 E74.97876 ; support material | |
| G1 X-20.620 Y3.595 E74.99575 ; support material | |
| M73 P1 ; update progress | |
| G1 F2100.000 E69.99575 ; retract | |
| G1 Z0.600 F7800.000 ; move to next layer (1) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z0.400 F7800.000 ; restore layer Z | |
| G1 E74.99575 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E75.02452 F4800.000 ; perimeter | |
| G1 X18.184 Y-0.169 E75.81181 ; perimeter | |
| G1 X18.184 Y1.159 E75.84058 ; perimeter | |
| G1 X-18.124 Y1.159 E76.62658 ; perimeter | |
| G1 X6.456 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X6.456 Y-10.738 E76.84283 F4800.000 ; perimeter | |
| G1 X7.504 Y-10.738 E76.86554 ; perimeter | |
| G1 X7.504 Y-0.748 E77.08180 ; perimeter | |
| G1 X18.763 Y-0.748 E77.32552 ; perimeter | |
| G1 X18.763 Y1.738 E77.37933 ; perimeter | |
| G1 X-18.763 Y1.738 E78.19168 ; perimeter | |
| G1 X-18.763 Y-0.748 E78.24549 ; perimeter | |
| G1 X6.396 Y-0.748 E78.79011 ; perimeter | |
| G1 X5.877 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X5.877 Y-11.316 E79.00637 F4800.000 ; perimeter | |
| G1 X8.083 Y-11.316 E79.05412 ; perimeter | |
| G1 X8.083 Y-1.326 E79.27038 ; perimeter | |
| G1 X19.341 Y-1.326 E79.51410 ; perimeter | |
| G1 X19.341 Y2.316 E79.59296 ; perimeter | |
| G1 X-19.341 Y2.316 E80.43036 ; perimeter | |
| G1 X-19.341 Y-1.326 E80.50922 ; perimeter | |
| G1 X5.817 Y-1.326 E81.05384 ; perimeter | |
| G1 X5.398 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X5.398 Y-2.205 E81.05950 F1200.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X5.398 Y-11.795 E81.51043 F600.000 ; perimeter | |
| G1 X5.681 Y-11.795 E81.52369 ; perimeter | |
| M126 ; enable fan | |
| G1 X8.279 Y-11.795 E81.56050 F1200.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X8.562 Y-11.795 E81.57377 F600.000 ; perimeter | |
| G1 X8.562 Y-2.205 E82.02469 ; perimeter | |
| M126 ; enable fan | |
| G1 X8.562 Y-1.805 E82.03036 F1200.000 ; perimeter | |
| G1 X19.820 Y-1.805 E82.18982 ; perimeter | |
| G1 X19.820 Y2.795 E82.25498 ; perimeter | |
| G1 X-19.820 Y2.795 E82.81644 ; perimeter | |
| G1 X-19.820 Y-1.805 E82.88160 ; perimeter | |
| G1 X5.338 Y-1.805 E83.23794 ; perimeter | |
| G1 X8.363 Y-1.858 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E84.41447 F600.000 ; fill | |
| G1 X6.980 Y-0.459 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-10.449 E84.51859 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P1 ; update progress | |
| G1 F2100.000 E79.51859 ; retract | |
| G1 Z0.700 F7800.000 ; move to next layer (2) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z0.500 F7800.000 ; restore layer Z | |
| G1 E84.51859 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E84.54735 F2159.384 ; perimeter | |
| G1 X-18.184 Y1.159 E85.33465 ; perimeter | |
| G1 X-18.184 Y-0.169 E85.36342 ; perimeter | |
| G1 X18.124 Y-0.169 E86.14941 ; perimeter | |
| G1 X7.729 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E86.38827 F2159.384 ; perimeter | |
| G1 X18.763 Y1.738 E86.44208 ; perimeter | |
| G1 X-18.763 Y1.738 E87.25443 ; perimeter | |
| G1 X-18.763 Y-0.748 E87.30824 ; perimeter | |
| G1 X6.231 Y-0.748 E87.84930 ; perimeter | |
| G1 X6.231 Y-10.738 E88.06556 ; perimeter | |
| G1 X7.729 Y-10.738 E88.09799 ; perimeter | |
| G1 X7.729 Y-0.808 E88.31295 ; perimeter | |
| G1 X8.308 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E88.55180 F2159.384 ; perimeter | |
| G1 X19.341 Y2.316 E88.63066 ; perimeter | |
| G1 X-19.341 Y2.316 E89.46806 ; perimeter | |
| G1 X-19.341 Y-1.326 E89.54692 ; perimeter | |
| G1 X5.652 Y-1.326 E90.08797 ; perimeter | |
| G1 X5.652 Y-11.316 E90.30423 ; perimeter | |
| G1 X8.308 Y-11.316 E90.36171 ; perimeter | |
| G1 X8.308 Y-1.386 E90.57667 ; perimeter | |
| G1 X8.786 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E90.73296 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E90.79811 ; perimeter | |
| G1 X-19.820 Y2.795 E91.35958 ; perimeter | |
| G1 X-19.820 Y-1.805 E91.42473 ; perimeter | |
| G1 X5.174 Y-1.805 E91.77875 ; perimeter | |
| G1 X5.174 Y-11.795 E91.92024 ; perimeter | |
| G1 X8.786 Y-11.795 E91.97141 ; perimeter | |
| G1 X8.786 Y-1.865 E92.11206 ; perimeter | |
| G1 X8.786 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E93.28859 F600.000 ; fill | |
| G1 X6.980 Y-0.459 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-10.449 E93.61699 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P2 ; update progress | |
| G1 F2100.000 E88.61699 ; retract | |
| G1 Z0.800 F7800.000 ; move to next layer (3) and lift | |
| G1 X6.585 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z0.600 F7800.000 ; restore layer Z | |
| G1 E93.61699 F2100.000 ; compensate retraction | |
| G1 X6.585 Y-10.159 E93.83325 F4800.000 ; perimeter | |
| G1 X7.375 Y-10.159 E93.85036 ; perimeter | |
| G1 X7.375 Y-0.169 E94.06661 ; perimeter | |
| G1 X18.184 Y-0.169 E94.30061 ; perimeter | |
| G1 X18.184 Y1.159 E94.32937 ; perimeter | |
| G1 X-18.184 Y1.159 E95.11667 ; perimeter | |
| G1 X-18.184 Y-0.169 E95.14543 ; perimeter | |
| G1 X6.525 Y-0.169 E95.68033 ; perimeter | |
| G1 X6.006 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X6.006 Y-10.738 E95.89659 F4800.000 ; perimeter | |
| G1 X7.954 Y-10.738 E95.93875 ; perimeter | |
| G1 X7.954 Y-0.748 E96.15501 ; perimeter | |
| G1 X18.763 Y-0.748 E96.38900 ; perimeter | |
| G1 X18.763 Y1.738 E96.44281 ; perimeter | |
| G1 X-18.763 Y1.738 E97.25516 ; perimeter | |
| G1 X-18.763 Y-0.748 E97.30897 ; perimeter | |
| G1 X5.946 Y-0.748 E97.84386 ; perimeter | |
| G1 X5.428 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X5.428 Y-11.316 E98.06012 F4800.000 ; perimeter | |
| G1 X8.532 Y-11.316 E98.12733 ; perimeter | |
| G1 X8.532 Y-1.326 E98.34359 ; perimeter | |
| G1 X19.341 Y-1.326 E98.57758 ; perimeter | |
| G1 X19.341 Y2.316 E98.65644 ; perimeter | |
| G1 X-19.341 Y2.316 E99.49383 ; perimeter | |
| G1 X-19.341 Y-1.326 E99.57269 ; perimeter | |
| G1 X5.368 Y-1.326 E100.10759 ; perimeter | |
| G1 X4.949 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.949 Y-11.795 E100.24909 F1200.000 ; perimeter | |
| G1 X9.011 Y-11.795 E100.30662 ; perimeter | |
| G1 X9.011 Y-1.805 E100.44812 ; perimeter | |
| G1 X19.820 Y-1.805 E100.60122 ; perimeter | |
| G1 X19.820 Y2.795 E100.66637 ; perimeter | |
| G1 X-19.820 Y2.795 E101.22784 ; perimeter | |
| G1 X-19.820 Y-1.805 E101.29299 ; perimeter | |
| G1 X4.889 Y-1.805 E101.64298 ; perimeter | |
| G1 X5.349 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E102.81950 F600.000 ; fill | |
| M73 P2 ; update progress | |
| G1 F2100.000 E97.81950 ; retract | |
| G1 Z0.900 F7800.000 ; move to next layer (2) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E102.81950 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E102.82581 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E102.82652 ; support material | |
| G1 X-20.018 Y4.016 E102.83282 ; support material | |
| G1 X-19.991 Y3.974 E102.83354 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E102.85195 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E102.86470 ; support material | |
| G1 X-21.520 Y4.395 E102.89444 ; support material | |
| G1 X-19.420 Y4.395 E102.92419 ; support material | |
| G1 X-19.420 Y3.595 E102.93552 ; support material | |
| G1 X-20.620 Y3.595 E102.95251 ; support material | |
| G1 F2100.000 E97.95251 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E102.95251 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E102.96450 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E102.97080 ; support material | |
| G1 X-21.141 Y9.644 E102.98100 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E102.99285 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E103.05367 ; support material | |
| G1 X-20.844 Y9.883 E103.06964 ; support material | |
| G1 X-19.749 Y11.916 E103.10235 ; support material | |
| G1 X-20.490 Y13.116 E103.12233 ; support material | |
| G1 X-20.045 Y13.116 E103.12864 ; support material | |
| G1 X-19.427 Y12.115 E103.14531 ; support material | |
| G1 X-17.119 Y12.183 E103.17802 ; support material | |
| G1 X-15.561 Y9.660 E103.22001 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E103.24003 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E103.24633 ; support material | |
| G1 X-12.930 Y9.927 E103.26303 ; support material | |
| G1 X-15.239 Y9.859 E103.29574 ; support material | |
| G1 X-16.796 Y12.382 E103.33774 ; support material | |
| G1 X-16.401 Y13.116 E103.34956 ; support material | |
| G1 X-12.104 Y13.116 E103.41042 ; support material | |
| G1 X-11.513 Y12.159 E103.42635 ; support material | |
| G1 X-12.608 Y10.126 E103.45906 ; support material | |
| G1 F2100.000 E98.45906 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E103.45906 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E103.47039 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E103.50014 ; support material | |
| G1 X-11.520 Y4.395 E103.51147 ; support material | |
| G1 X-9.420 Y4.395 E103.54122 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E103.54182 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E103.56084 ; support material | |
| G1 X-11.141 Y4.016 E103.56145 ; support material | |
| G1 X-9.799 Y4.016 E103.58047 ; support material | |
| G1 F2100.000 E98.58047 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E103.58047 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E103.61376 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E103.63404 ; support material | |
| G1 X-4.891 Y8.924 E103.64471 ; support material | |
| G1 X-7.853 Y8.924 E103.68666 ; support material | |
| G1 X-7.325 Y9.903 E103.70241 ; support material | |
| G1 X-8.883 Y12.426 E103.74441 ; support material | |
| G1 X-11.191 Y12.358 E103.77712 ; support material | |
| G1 X-11.659 Y13.116 E103.78975 ; support material | |
| G1 X-8.296 Y13.116 E103.83739 ; support material | |
| G1 X-8.561 Y12.625 E103.84530 ; support material | |
| G1 X-7.003 Y10.102 E103.88730 ; support material | |
| G1 X-4.695 Y10.170 E103.92001 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E103.95180 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E103.99233 ; support material | |
| G1 X-4.372 Y10.369 E104.02893 ; support material | |
| G1 X-3.277 Y12.402 E104.06164 ; support material | |
| G1 X-3.718 Y13.116 E104.07353 ; support material | |
| G1 X-3.273 Y13.116 E104.07983 ; support material | |
| G1 X-2.955 Y12.601 E104.08841 ; support material | |
| G1 X-0.647 Y12.669 E104.12112 ; support material | |
| G1 X0.911 Y10.146 E104.16312 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E104.17496 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E104.28656 ; support material | |
| G1 X-5.270 Y8.545 E104.29723 ; support material | |
| G1 X-21.520 Y8.545 E104.52740 ; support material | |
| G1 X-21.520 Y13.495 E104.59751 ; support material | |
| G1 X21.520 Y13.495 E105.20713 ; support material | |
| G1 X21.520 Y8.545 E105.27725 ; support material | |
| G1 X2.246 Y8.545 E105.55024 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E105.55654 F600.000 ; support material | |
| G1 X3.541 Y10.413 E105.58134 ; support material | |
| G1 X1.233 Y10.345 E105.61405 ; support material | |
| G1 X-0.325 Y12.868 E105.65604 ; support material | |
| G1 X-0.191 Y13.116 E105.66004 ; support material | |
| G1 X4.668 Y13.116 E105.72886 ; support material | |
| G1 X4.959 Y12.645 E105.73671 ; support material | |
| G1 X3.863 Y10.612 E105.76942 ; support material | |
| G1 X4.906 Y8.924 E105.79752 ; support material | |
| G1 F2100.000 E100.79752 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E105.79752 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E105.80885 F600.000 ; support material | |
| G1 X9.236 Y3.595 E105.82788 ; support material | |
| G1 X8.851 Y4.395 E105.84046 ; support material | |
| G1 X10.580 Y4.395 E105.86494 ; support material | |
| G1 F2100.000 E100.86494 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E105.86494 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E105.92853 F600.000 ; support material | |
| G1 X9.147 Y10.389 E105.95211 ; support material | |
| G1 X7.589 Y12.912 E105.99411 ; support material | |
| G1 X5.281 Y12.844 E106.02682 ; support material | |
| G1 X5.112 Y13.116 E106.03136 ; support material | |
| G1 X7.914 Y13.116 E106.07104 ; support material | |
| G1 X9.469 Y10.588 E106.11308 ; support material | |
| G1 X11.777 Y10.656 E106.14579 ; support material | |
| G1 X12.847 Y8.924 E106.17463 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E106.21954 F600.000 ; support material | |
| G1 X12.099 Y10.855 E106.25169 ; support material | |
| G1 X13.195 Y12.888 E106.28440 ; support material | |
| G1 X13.054 Y13.116 E106.28820 ; support material | |
| G1 X13.498 Y13.116 E106.29450 ; support material | |
| G1 X13.517 Y13.087 E106.29500 ; support material | |
| G1 X14.519 Y13.116 E106.30920 ; support material | |
| G1 X15.849 Y13.116 E106.32804 ; support material | |
| G1 X17.383 Y10.632 E106.36939 ; support material | |
| G1 X16.462 Y8.924 E106.39688 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E106.40708 F600.000 ; support material | |
| G1 X20.013 Y10.899 E106.43751 ; support material | |
| G1 X17.705 Y10.831 E106.47022 ; support material | |
| G1 X16.294 Y13.116 E106.50826 ; support material | |
| G1 X21.141 Y13.116 E106.57693 ; support material | |
| G1 X21.141 Y12.595 E106.58432 ; support material | |
| G1 X20.335 Y11.098 E106.60840 ; support material | |
| G1 X21.141 Y9.792 E106.63014 ; support material | |
| G1 F2100.000 E101.63014 ; retract | |
| G1 Z0.900 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E106.63014 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E106.64147 F600.000 ; support material | |
| G1 X18.480 Y3.595 E106.67121 ; support material | |
| G1 X18.480 Y4.395 E106.68254 ; support material | |
| G1 X20.580 Y4.395 E106.71229 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E106.71290 F600.000 ; support material | |
| G1 X18.859 Y3.974 E106.73192 ; support material | |
| G1 X18.859 Y4.016 E106.73253 ; support material | |
| G1 X20.201 Y4.016 E106.75155 ; support material | |
| M126 ; enable fan | |
| M73 P2 ; update progress | |
| G1 F2100.000 E101.75155 ; retract | |
| G1 Z0.900 F7800.000 ; move to next layer (4) and lift | |
| G1 X7.600 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z0.700 F7800.000 ; restore layer Z | |
| G1 E106.75155 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E106.98068 F2222.948 ; perimeter | |
| G1 X18.184 Y1.159 E107.00944 ; perimeter | |
| G1 X-18.184 Y1.159 E107.79674 ; perimeter | |
| G1 X-18.184 Y-0.169 E107.82550 ; perimeter | |
| G1 X6.360 Y-0.169 E108.35684 ; perimeter | |
| G1 X6.360 Y-10.159 E108.57310 ; perimeter | |
| G1 X7.600 Y-10.159 E108.59993 ; perimeter | |
| G1 X7.600 Y-0.229 E108.81489 ; perimeter | |
| G1 X8.178 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E109.04402 F2222.948 ; perimeter | |
| G1 X18.763 Y1.738 E109.09783 ; perimeter | |
| G1 X-18.763 Y1.738 E109.91018 ; perimeter | |
| G1 X-18.763 Y-0.748 E109.96399 ; perimeter | |
| G1 X5.782 Y-0.748 E110.49532 ; perimeter | |
| G1 X5.782 Y-10.738 E110.71158 ; perimeter | |
| G1 X8.178 Y-10.738 E110.76346 ; perimeter | |
| G1 X8.178 Y-0.808 E110.97842 ; perimeter | |
| G1 X8.757 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E111.20756 F2222.948 ; perimeter | |
| G1 X19.341 Y2.316 E111.28642 ; perimeter | |
| G1 X-19.341 Y2.316 E112.12381 ; perimeter | |
| G1 X-19.341 Y-1.326 E112.20267 ; perimeter | |
| G1 X5.203 Y-1.326 E112.73400 ; perimeter | |
| G1 X5.203 Y-11.316 E112.95026 ; perimeter | |
| G1 X8.757 Y-11.316 E113.02719 ; perimeter | |
| G1 X8.757 Y-1.386 E113.24215 ; perimeter | |
| G1 X9.235 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E113.39207 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E113.45723 ; perimeter | |
| G1 X-19.820 Y2.795 E114.01869 ; perimeter | |
| G1 X-19.820 Y-1.805 E114.08384 ; perimeter | |
| G1 X4.725 Y-1.805 E114.43150 ; perimeter | |
| G1 X4.725 Y-11.795 E114.57300 ; perimeter | |
| G1 X9.235 Y-11.795 E114.63689 ; perimeter | |
| G1 X9.235 Y-1.865 E114.77754 ; perimeter | |
| G1 X9.235 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X6.980 Y-9.870 F7800.000 ; move to first fill point | |
| G1 X6.980 Y0.422 E115.11587 F600.000 ; fill | |
| G1 X7.310 Y0.495 E115.12700 ; fill | |
| G1 X17.895 Y0.495 E115.47495 ; fill | |
| G1 X8.110 Y0.173 F7800.000 ; move to first fill point | |
| G1 X6.650 Y0.495 E115.52411 F600.000 ; fill | |
| G1 X-17.895 Y0.495 E116.33096 ; fill | |
| M73 P3 ; update progress | |
| G1 F2100.000 E111.33096 ; retract | |
| G1 Z1.000 F7800.000 ; move to next layer (5) and lift | |
| G1 X6.205 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z0.800 F7800.000 ; restore layer Z | |
| G1 E116.33096 F2100.000 ; compensate retraction | |
| G1 X6.205 Y-10.159 E116.54722 F2214.962 ; perimeter | |
| G1 X7.755 Y-10.159 E116.58076 ; perimeter | |
| G1 X7.755 Y-0.169 E116.79702 ; perimeter | |
| G1 X18.184 Y-0.169 E117.02280 ; perimeter | |
| G1 X18.184 Y1.159 E117.05156 ; perimeter | |
| G1 X-18.184 Y1.159 E117.83886 ; perimeter | |
| G1 X-18.184 Y-0.169 E117.86762 ; perimeter | |
| G1 X6.145 Y-0.169 E118.39430 ; perimeter | |
| G1 X5.627 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X5.627 Y-10.738 E118.61056 F2214.962 ; perimeter | |
| G1 X8.333 Y-10.738 E118.66915 ; perimeter | |
| G1 X8.333 Y-0.748 E118.88541 ; perimeter | |
| G1 X18.763 Y-0.748 E119.11119 ; perimeter | |
| G1 X18.763 Y1.738 E119.16500 ; perimeter | |
| G1 X-18.763 Y1.738 E119.97734 ; perimeter | |
| G1 X-18.763 Y-0.748 E120.03116 ; perimeter | |
| G1 X5.567 Y-0.748 E120.55784 ; perimeter | |
| G1 X5.048 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X5.048 Y-11.316 E120.77410 F2214.962 ; perimeter | |
| G1 X8.912 Y-11.316 E120.85773 ; perimeter | |
| G1 X8.912 Y-1.326 E121.07399 ; perimeter | |
| G1 X19.341 Y-1.326 E121.29977 ; perimeter | |
| G1 X19.341 Y2.316 E121.37863 ; perimeter | |
| G1 X-19.341 Y2.316 E122.21602 ; perimeter | |
| G1 X-19.341 Y-1.326 E122.29488 ; perimeter | |
| G1 X4.988 Y-1.326 E122.82156 ; perimeter | |
| G1 X4.570 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.570 Y-11.795 E122.96306 F600.000 ; perimeter | |
| G1 X9.390 Y-11.795 E123.03134 ; perimeter | |
| G1 X9.390 Y-1.805 E123.17284 ; perimeter | |
| G1 X19.820 Y-1.805 E123.32057 ; perimeter | |
| G1 X19.820 Y2.795 E123.38572 ; perimeter | |
| G1 X-19.820 Y2.795 E123.94718 ; perimeter | |
| G1 X-19.820 Y-1.805 E124.01234 ; perimeter | |
| G1 X4.510 Y-1.805 E124.35695 ; perimeter | |
| G1 X4.970 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X6.980 Y-9.870 F7800.000 ; move to first fill point | |
| G1 X6.980 Y0.338 E124.69252 F600.000 ; fill | |
| G1 X7.465 Y0.495 E124.70929 ; fill | |
| G1 X17.895 Y0.495 E125.05214 ; fill | |
| G1 X7.654 Y0.120 F7800.000 ; move to first fill point | |
| G1 X6.495 Y0.495 E125.09220 F600.000 ; fill | |
| G1 X-17.895 Y0.495 E125.89396 ; fill | |
| M126 ; enable fan | |
| M73 P3 ; update progress | |
| G1 F2100.000 E120.89396 ; retract | |
| G1 Z1.100 F7800.000 ; move to next layer (6) and lift | |
| G1 X6.646 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z0.900 F7800.000 ; restore layer Z | |
| G1 E125.89396 F2100.000 ; compensate retraction | |
| G1 X6.646 Y-9.581 E126.11394 F4800.000 ; perimeter | |
| G1 X7.314 Y-9.581 E126.12839 ; perimeter | |
| G1 X7.314 Y0.581 E126.34837 ; perimeter | |
| G1 X6.706 Y0.581 E126.36152 ; perimeter | |
| G1 X6.068 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X6.068 Y-10.159 E126.57778 F4800.000 ; perimeter | |
| G1 X7.892 Y-10.159 E126.61728 ; perimeter | |
| G1 X7.892 Y-0.169 E126.83354 ; perimeter | |
| G1 X18.184 Y-0.169 E127.05634 ; perimeter | |
| G1 X18.184 Y1.159 E127.08510 ; perimeter | |
| G1 X-18.184 Y1.159 E127.87240 ; perimeter | |
| G1 X-18.184 Y-0.169 E127.90116 ; perimeter | |
| G1 X6.008 Y-0.169 E128.42486 ; perimeter | |
| G1 X5.489 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X5.489 Y-10.738 E128.64112 F4800.000 ; perimeter | |
| G1 X8.471 Y-10.738 E128.70567 ; perimeter | |
| G1 X8.471 Y-0.748 E128.92193 ; perimeter | |
| G1 X18.763 Y-0.748 E129.14473 ; perimeter | |
| G1 X18.763 Y1.738 E129.19854 ; perimeter | |
| G1 X-18.763 Y1.738 E130.01088 ; perimeter | |
| G1 X-18.763 Y-0.748 E130.06470 ; perimeter | |
| G1 X5.429 Y-0.748 E130.58840 ; perimeter | |
| G1 X4.911 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X4.911 Y-11.316 E130.80466 F4800.000 ; perimeter | |
| G1 X9.049 Y-11.316 E130.89425 ; perimeter | |
| G1 X9.049 Y-1.326 E131.11051 ; perimeter | |
| G1 X19.341 Y-1.326 E131.33331 ; perimeter | |
| G1 X19.341 Y2.316 E131.41217 ; perimeter | |
| G1 X-19.341 Y2.316 E132.24956 ; perimeter | |
| G1 X-19.341 Y-1.326 E132.32842 ; perimeter | |
| G1 X4.851 Y-1.326 E132.85212 ; perimeter | |
| G1 X4.432 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.432 Y-11.795 E132.99362 F1200.000 ; perimeter | |
| G1 X9.528 Y-11.795 E133.06580 ; perimeter | |
| G1 X9.528 Y-1.805 E133.20730 ; perimeter | |
| G1 X19.820 Y-1.805 E133.35308 ; perimeter | |
| G1 X19.820 Y2.795 E133.41823 ; perimeter | |
| G1 X-19.820 Y2.795 E133.97970 ; perimeter | |
| G1 X-19.820 Y-1.805 E134.04485 ; perimeter | |
| G1 X4.372 Y-1.805 E134.38751 ; perimeter | |
| G1 X4.832 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X7.603 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E134.72584 F600.000 ; fill | |
| G1 X6.357 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E135.52307 F600.000 ; fill | |
| M73 P4 ; update progress | |
| G1 F2100.000 E130.52307 ; retract | |
| G1 Z1.200 F7800.000 ; move to next layer (3) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E135.52307 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E135.52937 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E135.53009 ; support material | |
| G1 X-20.018 Y4.016 E135.53639 ; support material | |
| G1 X-19.991 Y3.974 E135.53710 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E135.55552 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E135.56827 ; support material | |
| G1 X-21.520 Y4.395 E135.59801 ; support material | |
| G1 X-19.420 Y4.395 E135.62775 ; support material | |
| G1 X-19.420 Y3.595 E135.63909 ; support material | |
| G1 X-20.620 Y3.595 E135.65608 ; support material | |
| G1 F2100.000 E130.65608 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E135.65608 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E135.66807 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E135.67437 ; support material | |
| G1 X-21.141 Y9.644 E135.68457 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E135.69642 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E135.75724 ; support material | |
| G1 X-20.844 Y9.883 E135.77321 ; support material | |
| G1 X-19.749 Y11.916 E135.80592 ; support material | |
| G1 X-20.490 Y13.116 E135.82590 ; support material | |
| G1 X-20.045 Y13.116 E135.83220 ; support material | |
| G1 X-19.427 Y12.115 E135.84888 ; support material | |
| G1 X-17.119 Y12.183 E135.88159 ; support material | |
| G1 X-15.561 Y9.660 E135.92358 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E135.94360 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E135.94990 ; support material | |
| G1 X-12.930 Y9.927 E135.96660 ; support material | |
| G1 X-15.239 Y9.859 E135.99931 ; support material | |
| G1 X-16.796 Y12.382 E136.04131 ; support material | |
| G1 X-16.401 Y13.116 E136.05313 ; support material | |
| G1 X-12.104 Y13.116 E136.11399 ; support material | |
| G1 X-11.513 Y12.159 E136.12992 ; support material | |
| G1 X-12.608 Y10.126 E136.16263 ; support material | |
| G1 F2100.000 E131.16263 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E136.16263 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E136.17396 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E136.20371 ; support material | |
| G1 X-11.520 Y4.395 E136.21504 ; support material | |
| G1 X-9.420 Y4.395 E136.24478 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E136.24539 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E136.26441 ; support material | |
| G1 X-11.141 Y4.016 E136.26502 ; support material | |
| G1 X-9.799 Y4.016 E136.28404 ; support material | |
| G1 F2100.000 E131.28404 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E136.28404 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E136.31733 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E136.33761 ; support material | |
| G1 X-4.891 Y8.924 E136.34828 ; support material | |
| G1 X-7.853 Y8.924 E136.39022 ; support material | |
| G1 X-7.325 Y9.903 E136.40598 ; support material | |
| G1 X-8.883 Y12.426 E136.44798 ; support material | |
| G1 X-11.191 Y12.358 E136.48069 ; support material | |
| G1 X-11.659 Y13.116 E136.49332 ; support material | |
| G1 X-8.296 Y13.116 E136.54096 ; support material | |
| G1 X-8.561 Y12.625 E136.54887 ; support material | |
| G1 X-7.003 Y10.102 E136.59086 ; support material | |
| G1 X-4.695 Y10.170 E136.62357 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E136.65536 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E136.69589 ; support material | |
| G1 X-4.372 Y10.369 E136.73249 ; support material | |
| G1 X-3.277 Y12.402 E136.76521 ; support material | |
| G1 X-3.718 Y13.116 E136.77710 ; support material | |
| G1 X-3.273 Y13.116 E136.78340 ; support material | |
| G1 X-2.955 Y12.601 E136.79198 ; support material | |
| G1 X-0.647 Y12.669 E136.82469 ; support material | |
| G1 X0.911 Y10.146 E136.86669 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E136.87853 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E136.99013 ; support material | |
| G1 X-5.270 Y8.545 E137.00080 ; support material | |
| G1 X-21.520 Y8.545 E137.23097 ; support material | |
| G1 X-21.520 Y13.495 E137.30108 ; support material | |
| G1 X21.520 Y13.495 E137.91070 ; support material | |
| G1 X21.520 Y8.545 E137.98082 ; support material | |
| G1 X2.246 Y8.545 E138.25381 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E138.26011 F600.000 ; support material | |
| G1 X3.541 Y10.413 E138.28491 ; support material | |
| G1 X1.233 Y10.345 E138.31762 ; support material | |
| G1 X-0.325 Y12.868 E138.35961 ; support material | |
| G1 X-0.191 Y13.116 E138.36361 ; support material | |
| G1 X4.668 Y13.116 E138.43243 ; support material | |
| G1 X4.959 Y12.645 E138.44027 ; support material | |
| G1 X3.863 Y10.612 E138.47298 ; support material | |
| G1 X4.906 Y8.924 E138.50109 ; support material | |
| G1 F2100.000 E133.50109 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E138.50109 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E138.51242 F600.000 ; support material | |
| G1 X9.236 Y3.595 E138.53145 ; support material | |
| G1 X8.851 Y4.395 E138.54403 ; support material | |
| G1 X10.580 Y4.395 E138.56851 ; support material | |
| G1 F2100.000 E133.56851 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E138.56851 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E138.63210 F600.000 ; support material | |
| G1 X9.147 Y10.389 E138.65568 ; support material | |
| G1 X7.589 Y12.912 E138.69768 ; support material | |
| G1 X5.281 Y12.844 E138.73039 ; support material | |
| G1 X5.112 Y13.116 E138.73492 ; support material | |
| G1 X7.914 Y13.116 E138.77461 ; support material | |
| G1 X9.469 Y10.588 E138.81665 ; support material | |
| G1 X11.777 Y10.656 E138.84936 ; support material | |
| G1 X12.847 Y8.924 E138.87820 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E138.92311 F600.000 ; support material | |
| G1 X12.099 Y10.855 E138.95526 ; support material | |
| G1 X13.195 Y12.888 E138.98797 ; support material | |
| G1 X13.054 Y13.116 E138.99177 ; support material | |
| G1 X13.498 Y13.116 E138.99807 ; support material | |
| G1 X13.517 Y13.087 E138.99856 ; support material | |
| G1 X14.519 Y13.116 E139.01277 ; support material | |
| G1 X15.849 Y13.116 E139.03160 ; support material | |
| G1 X17.383 Y10.632 E139.07296 ; support material | |
| G1 X16.462 Y8.924 E139.10045 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E139.11065 F600.000 ; support material | |
| G1 X20.013 Y10.899 E139.14108 ; support material | |
| G1 X17.705 Y10.831 E139.17379 ; support material | |
| G1 X16.294 Y13.116 E139.21183 ; support material | |
| G1 X21.141 Y13.116 E139.28050 ; support material | |
| G1 X21.141 Y12.595 E139.28789 ; support material | |
| G1 X20.335 Y11.098 E139.31197 ; support material | |
| G1 X21.141 Y9.792 E139.33371 ; support material | |
| G1 F2100.000 E134.33371 ; retract | |
| G1 Z1.200 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E139.33371 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E139.34504 F600.000 ; support material | |
| G1 X18.480 Y3.595 E139.37478 ; support material | |
| G1 X18.480 Y4.395 E139.38611 ; support material | |
| G1 X20.580 Y4.395 E139.41586 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E139.41647 F600.000 ; support material | |
| G1 X18.859 Y3.974 E139.43549 ; support material | |
| G1 X18.859 Y4.016 E139.43609 ; support material | |
| G1 X20.201 Y4.016 E139.45512 ; support material | |
| M126 ; enable fan | |
| M73 P4 ; update progress | |
| G1 F2100.000 E134.45512 ; retract | |
| G1 Z1.200 F7800.000 ; move to next layer (7) and lift | |
| G1 X7.451 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.000 F7800.000 ; restore layer Z | |
| G1 E139.45512 F2100.000 ; compensate retraction | |
| G1 X6.509 Y0.581 E139.47553 F2212.790 ; perimeter | |
| G1 X6.509 Y-9.581 E139.69550 ; perimeter | |
| G1 X7.451 Y-9.581 E139.71591 ; perimeter | |
| G1 X7.451 Y0.521 E139.93459 ; perimeter | |
| G1 X8.030 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E140.15441 F2212.790 ; perimeter | |
| G1 X18.184 Y1.159 E140.18317 ; perimeter | |
| G1 X-18.184 Y1.159 E140.97047 ; perimeter | |
| G1 X-18.184 Y-0.169 E140.99923 ; perimeter | |
| G1 X5.930 Y-0.169 E141.52125 ; perimeter | |
| G1 X5.930 Y-10.159 E141.73751 ; perimeter | |
| G1 X8.030 Y-10.159 E141.78297 ; perimeter | |
| G1 X8.030 Y-0.229 E141.99793 ; perimeter | |
| G1 X8.608 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E142.21775 F2212.790 ; perimeter | |
| G1 X18.763 Y1.738 E142.27156 ; perimeter | |
| G1 X-18.763 Y1.738 E143.08391 ; perimeter | |
| G1 X-18.763 Y-0.748 E143.13772 ; perimeter | |
| G1 X5.351 Y-0.748 E143.65974 ; perimeter | |
| G1 X5.351 Y-10.738 E143.87600 ; perimeter | |
| G1 X8.608 Y-10.738 E143.94651 ; perimeter | |
| G1 X8.608 Y-0.808 E144.16147 ; perimeter | |
| G1 X9.187 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E144.38128 F2212.790 ; perimeter | |
| G1 X19.341 Y2.316 E144.46015 ; perimeter | |
| G1 X-19.341 Y2.316 E145.29754 ; perimeter | |
| G1 X-19.341 Y-1.326 E145.37640 ; perimeter | |
| G1 X4.773 Y-1.326 E145.89842 ; perimeter | |
| G1 X4.773 Y-11.316 E146.11468 ; perimeter | |
| G1 X9.187 Y-11.316 E146.21023 ; perimeter | |
| G1 X9.187 Y-1.386 E146.42519 ; perimeter | |
| G1 X9.666 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E146.56902 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E146.63418 ; perimeter | |
| G1 X-19.820 Y2.795 E147.19564 ; perimeter | |
| G1 X-19.820 Y-1.805 E147.26079 ; perimeter | |
| G1 X4.294 Y-1.805 E147.60235 ; perimeter | |
| G1 X4.294 Y-11.795 E147.74385 ; perimeter | |
| G1 X9.666 Y-11.795 E147.81993 ; perimeter | |
| G1 X9.666 Y-1.865 E147.96058 ; perimeter | |
| G1 X9.666 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.741 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E148.29438 F600.000 ; fill | |
| G1 X6.980 Y0.292 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-9.292 E148.39426 F600.000 ; fill | |
| G1 X6.219 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E149.18697 F600.000 ; fill | |
| M73 P4 ; update progress | |
| G1 F2100.000 E144.18697 ; retract | |
| G1 Z1.300 F7800.000 ; move to next layer (8) and lift | |
| G1 X6.371 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.100 F7800.000 ; restore layer Z | |
| G1 E149.18697 F2100.000 ; compensate retraction | |
| G1 X6.371 Y-9.581 E149.40695 F2209.486 ; perimeter | |
| G1 X7.589 Y-9.581 E149.43332 ; perimeter | |
| G1 X7.589 Y0.581 E149.65329 ; perimeter | |
| G1 X6.431 Y0.581 E149.67836 ; perimeter | |
| G1 X5.792 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X5.792 Y-10.159 E149.89462 F2209.486 ; perimeter | |
| G1 X8.168 Y-10.159 E149.94604 ; perimeter | |
| G1 X8.168 Y-0.169 E150.16230 ; perimeter | |
| G1 X18.184 Y-0.169 E150.37914 ; perimeter | |
| G1 X18.184 Y1.159 E150.40790 ; perimeter | |
| G1 X-18.184 Y1.159 E151.19520 ; perimeter | |
| G1 X-18.184 Y-0.169 E151.22397 ; perimeter | |
| G1 X5.732 Y-0.169 E151.74171 ; perimeter | |
| G1 X5.214 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X5.214 Y-10.738 E151.95797 F2209.486 ; perimeter | |
| G1 X8.746 Y-10.738 E152.03443 ; perimeter | |
| G1 X8.746 Y-0.748 E152.25069 ; perimeter | |
| G1 X18.763 Y-0.748 E152.46753 ; perimeter | |
| G1 X18.763 Y1.738 E152.52134 ; perimeter | |
| G1 X-18.763 Y1.738 E153.33369 ; perimeter | |
| G1 X-18.763 Y-0.748 E153.38750 ; perimeter | |
| G1 X5.154 Y-0.748 E153.90524 ; perimeter | |
| G1 X4.635 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X4.635 Y-11.316 E154.12150 F2209.486 ; perimeter | |
| G1 X9.325 Y-11.316 E154.22301 ; perimeter | |
| G1 X9.325 Y-1.326 E154.43927 ; perimeter | |
| G1 X19.341 Y-1.326 E154.65611 ; perimeter | |
| G1 X19.341 Y2.316 E154.73497 ; perimeter | |
| G1 X-19.341 Y2.316 E155.57237 ; perimeter | |
| G1 X-19.341 Y-1.326 E155.65123 ; perimeter | |
| G1 X4.575 Y-1.326 E156.16897 ; perimeter | |
| G1 X4.157 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.157 Y-11.795 E156.31047 F600.000 ; perimeter | |
| G1 X9.803 Y-11.795 E156.39044 ; perimeter | |
| G1 X9.803 Y-1.805 E156.53194 ; perimeter | |
| G1 X19.820 Y-1.805 E156.67382 ; perimeter | |
| G1 X19.820 Y2.795 E156.73898 ; perimeter | |
| G1 X-19.820 Y2.795 E157.30044 ; perimeter | |
| G1 X-19.820 Y-1.805 E157.36559 ; perimeter | |
| G1 X4.097 Y-1.805 E157.70435 ; perimeter | |
| G1 X4.557 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X7.878 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E158.03363 F600.000 ; fill | |
| G1 X6.980 Y0.292 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-9.292 E158.34866 F600.000 ; fill | |
| G1 X6.082 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E159.13684 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P5 ; update progress | |
| G1 F2100.000 E154.13684 ; retract | |
| G1 Z1.400 F7800.000 ; move to next layer (9) and lift | |
| G1 X6.233 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.200 F7800.000 ; restore layer Z | |
| G1 E159.13684 F2100.000 ; compensate retraction | |
| G1 X6.233 Y-9.581 E159.35682 F4800.000 ; perimeter | |
| G1 X7.727 Y-9.581 E159.38915 ; perimeter | |
| G1 X7.727 Y0.581 E159.60913 ; perimeter | |
| G1 X6.293 Y0.581 E159.64016 ; perimeter | |
| G1 X5.655 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X5.655 Y-10.159 E159.85642 F4800.000 ; perimeter | |
| G1 X8.305 Y-10.159 E159.91379 ; perimeter | |
| G1 X8.305 Y-0.169 E160.13005 ; perimeter | |
| G1 X18.184 Y-0.169 E160.34391 ; perimeter | |
| G1 X18.184 Y1.159 E160.37268 ; perimeter | |
| G1 X-18.184 Y1.159 E161.15997 ; perimeter | |
| G1 X-18.184 Y-0.169 E161.18874 ; perimeter | |
| G1 X5.595 Y-0.169 E161.70350 ; perimeter | |
| G1 X5.076 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X5.076 Y-10.738 E161.91976 F4800.000 ; perimeter | |
| G1 X8.884 Y-10.738 E162.00218 ; perimeter | |
| G1 X8.884 Y-0.748 E162.21844 ; perimeter | |
| G1 X18.763 Y-0.748 E162.43230 ; perimeter | |
| G1 X18.763 Y1.738 E162.48611 ; perimeter | |
| G1 X-18.763 Y1.738 E163.29846 ; perimeter | |
| G1 X-18.763 Y-0.748 E163.35227 ; perimeter | |
| G1 X5.016 Y-0.748 E163.86703 ; perimeter | |
| G1 X4.498 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X4.498 Y-11.316 E164.08329 F4800.000 ; perimeter | |
| G1 X9.462 Y-11.316 E164.19076 ; perimeter | |
| G1 X9.462 Y-1.326 E164.40702 ; perimeter | |
| G1 X19.341 Y-1.326 E164.62088 ; perimeter | |
| G1 X19.341 Y2.316 E164.69974 ; perimeter | |
| G1 X-19.341 Y2.316 E165.53714 ; perimeter | |
| G1 X-19.341 Y-1.326 E165.61600 ; perimeter | |
| G1 X4.438 Y-1.326 E166.13076 ; perimeter | |
| G1 X4.019 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.019 Y-11.795 E166.27226 F1200.000 ; perimeter | |
| G1 X9.941 Y-11.795 E166.35613 ; perimeter | |
| G1 X9.941 Y-1.805 E166.49763 ; perimeter | |
| G1 X19.820 Y-1.805 E166.63756 ; perimeter | |
| G1 X19.820 Y2.795 E166.70272 ; perimeter | |
| G1 X-19.820 Y2.795 E167.26418 ; perimeter | |
| G1 X-19.820 Y-1.805 E167.32933 ; perimeter | |
| G1 X3.959 Y-1.805 E167.66614 ; perimeter | |
| G1 X4.419 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X8.016 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E167.99090 F600.000 ; fill | |
| G1 X6.980 Y0.292 F7800.000 ; move to first fill point | |
| G1 X6.980 Y-9.292 E168.30592 F600.000 ; fill | |
| G1 X5.944 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E169.08959 F600.000 ; fill | |
| M73 P5 ; update progress | |
| G1 F2100.000 E164.08959 ; retract | |
| G1 Z1.500 F7800.000 ; move to next layer (4) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E169.08959 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E169.09589 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E169.09660 ; support material | |
| G1 X-20.018 Y4.016 E169.10290 ; support material | |
| G1 X-19.991 Y3.974 E169.10362 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E169.12203 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E169.13478 ; support material | |
| G1 X-21.520 Y4.395 E169.16452 ; support material | |
| G1 X-19.420 Y4.395 E169.19427 ; support material | |
| G1 X-19.420 Y3.595 E169.20560 ; support material | |
| G1 X-20.620 Y3.595 E169.22260 ; support material | |
| G1 F2100.000 E164.22260 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E169.22260 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E169.23458 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E169.24088 ; support material | |
| G1 X-21.141 Y9.644 E169.25108 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E169.26293 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E169.32375 ; support material | |
| G1 X-20.844 Y9.883 E169.33972 ; support material | |
| G1 X-19.749 Y11.916 E169.37243 ; support material | |
| G1 X-20.490 Y13.116 E169.39242 ; support material | |
| G1 X-20.045 Y13.116 E169.39872 ; support material | |
| G1 X-19.427 Y12.115 E169.41539 ; support material | |
| G1 X-17.119 Y12.183 E169.44810 ; support material | |
| G1 X-15.561 Y9.660 E169.49010 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E169.51011 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E169.51641 ; support material | |
| G1 X-12.930 Y9.927 E169.53312 ; support material | |
| G1 X-15.239 Y9.859 E169.56583 ; support material | |
| G1 X-16.796 Y12.382 E169.60782 ; support material | |
| G1 X-16.401 Y13.116 E169.61964 ; support material | |
| G1 X-12.104 Y13.116 E169.68050 ; support material | |
| G1 X-11.513 Y12.159 E169.69643 ; support material | |
| G1 X-12.608 Y10.126 E169.72915 ; support material | |
| G1 F2100.000 E164.72915 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E169.72915 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E169.74048 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E169.77022 ; support material | |
| G1 X-11.520 Y4.395 E169.78155 ; support material | |
| G1 X-9.420 Y4.395 E169.81130 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E169.81190 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E169.83093 ; support material | |
| G1 X-11.141 Y4.016 E169.83153 ; support material | |
| G1 X-9.799 Y4.016 E169.85056 ; support material | |
| G1 F2100.000 E164.85056 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E169.85056 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E169.88385 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E169.90412 ; support material | |
| G1 X-4.891 Y8.924 E169.91479 ; support material | |
| G1 X-7.853 Y8.924 E169.95674 ; support material | |
| G1 X-7.325 Y9.903 E169.97250 ; support material | |
| G1 X-8.883 Y12.426 E170.01449 ; support material | |
| G1 X-11.191 Y12.358 E170.04720 ; support material | |
| G1 X-11.659 Y13.116 E170.05983 ; support material | |
| G1 X-8.296 Y13.116 E170.10747 ; support material | |
| G1 X-8.561 Y12.625 E170.11538 ; support material | |
| G1 X-7.003 Y10.102 E170.15738 ; support material | |
| G1 X-4.695 Y10.170 E170.19009 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E170.22188 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E170.26241 ; support material | |
| G1 X-4.372 Y10.369 E170.29901 ; support material | |
| G1 X-3.277 Y12.402 E170.33172 ; support material | |
| G1 X-3.718 Y13.116 E170.34361 ; support material | |
| G1 X-3.273 Y13.116 E170.34991 ; support material | |
| G1 X-2.955 Y12.601 E170.35849 ; support material | |
| G1 X-0.647 Y12.669 E170.39120 ; support material | |
| G1 X0.911 Y10.146 E170.43320 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E170.44505 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E170.55664 ; support material | |
| G1 X-5.270 Y8.545 E170.56732 ; support material | |
| G1 X-21.520 Y8.545 E170.79748 ; support material | |
| G1 X-21.520 Y13.495 E170.86759 ; support material | |
| G1 X21.520 Y13.495 E171.47722 ; support material | |
| G1 X21.520 Y8.545 E171.54733 ; support material | |
| G1 X2.246 Y8.545 E171.82032 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E171.82662 F600.000 ; support material | |
| G1 X3.541 Y10.413 E171.85142 ; support material | |
| G1 X1.233 Y10.345 E171.88413 ; support material | |
| G1 X-0.325 Y12.868 E171.92613 ; support material | |
| G1 X-0.191 Y13.116 E171.93013 ; support material | |
| G1 X4.668 Y13.116 E171.99894 ; support material | |
| G1 X4.959 Y12.645 E172.00679 ; support material | |
| G1 X3.863 Y10.612 E172.03950 ; support material | |
| G1 X4.906 Y8.924 E172.06760 ; support material | |
| G1 F2100.000 E167.06760 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E172.06760 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E172.07893 F600.000 ; support material | |
| G1 X9.236 Y3.595 E172.09796 ; support material | |
| G1 X8.851 Y4.395 E172.11054 ; support material | |
| G1 X10.580 Y4.395 E172.13503 ; support material | |
| G1 F2100.000 E167.13503 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E172.13503 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E172.19862 F600.000 ; support material | |
| G1 X9.147 Y10.389 E172.22219 ; support material | |
| G1 X7.589 Y12.912 E172.26419 ; support material | |
| G1 X5.281 Y12.844 E172.29690 ; support material | |
| G1 X5.112 Y13.116 E172.30144 ; support material | |
| G1 X7.914 Y13.116 E172.34112 ; support material | |
| G1 X9.469 Y10.588 E172.38316 ; support material | |
| G1 X11.777 Y10.656 E172.41587 ; support material | |
| G1 X12.847 Y8.924 E172.44471 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E172.48962 F600.000 ; support material | |
| G1 X12.099 Y10.855 E172.52177 ; support material | |
| G1 X13.195 Y12.888 E172.55448 ; support material | |
| G1 X13.054 Y13.116 E172.55828 ; support material | |
| G1 X13.498 Y13.116 E172.56459 ; support material | |
| G1 X13.517 Y13.087 E172.56508 ; support material | |
| G1 X14.519 Y13.116 E172.57928 ; support material | |
| G1 X15.849 Y13.116 E172.59812 ; support material | |
| G1 X17.383 Y10.632 E172.63947 ; support material | |
| G1 X16.462 Y8.924 E172.66696 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E172.67717 F600.000 ; support material | |
| G1 X20.013 Y10.899 E172.70759 ; support material | |
| G1 X17.705 Y10.831 E172.74030 ; support material | |
| G1 X16.294 Y13.116 E172.77834 ; support material | |
| G1 X21.141 Y13.116 E172.84701 ; support material | |
| G1 X21.141 Y12.595 E172.85440 ; support material | |
| G1 X20.335 Y11.098 E172.87848 ; support material | |
| G1 X21.141 Y9.792 E172.90022 ; support material | |
| G1 F2100.000 E167.90022 ; retract | |
| G1 Z1.500 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E172.90022 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E172.91155 F600.000 ; support material | |
| G1 X18.480 Y3.595 E172.94129 ; support material | |
| G1 X18.480 Y4.395 E172.95263 ; support material | |
| G1 X20.580 Y4.395 E172.98237 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E172.98298 F600.000 ; support material | |
| G1 X18.859 Y3.974 E173.00200 ; support material | |
| G1 X18.859 Y4.016 E173.00261 ; support material | |
| G1 X20.201 Y4.016 E173.02163 ; support material | |
| M126 ; enable fan | |
| M73 P6 ; update progress | |
| G1 F2100.000 E168.02163 ; retract | |
| G1 Z1.500 F7800.000 ; move to next layer (10) and lift | |
| G1 X7.864 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.300 F7800.000 ; restore layer Z | |
| G1 E173.02163 F2100.000 ; compensate retraction | |
| G1 X6.096 Y0.581 E173.05992 F2083.056 ; perimeter | |
| G1 X6.096 Y-9.581 E173.27989 ; perimeter | |
| G1 X7.864 Y-9.581 E173.31818 ; perimeter | |
| G1 X7.864 Y0.521 E173.53686 ; perimeter | |
| G1 X8.443 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E173.74774 F2083.056 ; perimeter | |
| G1 X18.184 Y1.159 E173.77650 ; perimeter | |
| G1 X-18.184 Y1.159 E174.56380 ; perimeter | |
| G1 X-18.184 Y-0.169 E174.59256 ; perimeter | |
| G1 X5.517 Y-0.169 E175.10564 ; perimeter | |
| G1 X5.517 Y-10.159 E175.32190 ; perimeter | |
| G1 X8.443 Y-10.159 E175.38524 ; perimeter | |
| G1 X8.443 Y-0.229 E175.60020 ; perimeter | |
| G1 X9.021 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E175.81108 F2083.056 ; perimeter | |
| G1 X18.763 Y1.738 E175.86489 ; perimeter | |
| G1 X-18.763 Y1.738 E176.67724 ; perimeter | |
| G1 X-18.763 Y-0.748 E176.73105 ; perimeter | |
| G1 X4.939 Y-0.748 E177.24413 ; perimeter | |
| G1 X4.939 Y-10.738 E177.46039 ; perimeter | |
| G1 X9.021 Y-10.738 E177.54877 ; perimeter | |
| G1 X9.021 Y-0.808 E177.76374 ; perimeter | |
| G1 X9.600 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E177.97462 F2083.056 ; perimeter | |
| G1 X19.341 Y2.316 E178.05348 ; perimeter | |
| G1 X-19.341 Y2.316 E178.89087 ; perimeter | |
| G1 X-19.341 Y-1.326 E178.96973 ; perimeter | |
| G1 X4.360 Y-1.326 E179.48281 ; perimeter | |
| G1 X4.360 Y-11.316 E179.69907 ; perimeter | |
| G1 X9.600 Y-11.316 E179.81250 ; perimeter | |
| G1 X9.600 Y-1.386 E180.02746 ; perimeter | |
| G1 X10.079 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E180.16544 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E180.23060 ; perimeter | |
| G1 X-19.820 Y2.795 E180.79206 ; perimeter | |
| G1 X-19.820 Y-1.805 E180.85721 ; perimeter | |
| G1 X3.881 Y-1.805 E181.19292 ; perimeter | |
| G1 X3.881 Y-11.795 E181.33442 ; perimeter | |
| G1 X10.079 Y-11.795 E181.42220 ; perimeter | |
| G1 X10.079 Y-1.865 E181.56285 ; perimeter | |
| G1 X10.079 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.445 Y0.161 F7800.000 ; move to first fill point | |
| G1 X6.515 Y0.161 E181.58298 F3124.584 ; fill | |
| G1 X6.515 Y-0.421 E181.59559 ; fill | |
| G1 X7.445 Y-0.421 E181.61572 ; fill | |
| G1 X7.445 Y-1.004 E181.62833 ; fill | |
| G1 X6.515 Y-1.004 E181.64846 ; fill | |
| G1 X6.515 Y-1.587 E181.66107 ; fill | |
| G1 X7.445 Y-1.587 E181.68120 ; fill | |
| G1 X7.445 Y-2.169 E181.69382 ; fill | |
| G1 X6.515 Y-2.169 E181.71395 ; fill | |
| G1 X6.515 Y-2.752 E181.72656 ; fill | |
| G1 X7.445 Y-2.752 E181.74669 ; fill | |
| G1 X7.445 Y-3.335 E181.75930 ; fill | |
| G1 X6.515 Y-3.335 E181.77943 ; fill | |
| G1 X6.515 Y-3.917 E181.79205 ; fill | |
| G1 X7.445 Y-3.917 E181.81217 ; fill | |
| G1 X7.445 Y-4.500 E181.82479 ; fill | |
| G1 X6.515 Y-4.500 E181.84492 ; fill | |
| G1 X6.515 Y-5.083 E181.85753 ; fill | |
| G1 X7.445 Y-5.083 E181.87766 ; fill | |
| G1 X7.445 Y-5.665 E181.89027 ; fill | |
| G1 X6.515 Y-5.665 E181.91040 ; fill | |
| G1 X6.515 Y-6.248 E181.92302 ; fill | |
| G1 X7.445 Y-6.248 E181.94315 ; fill | |
| G1 X7.445 Y-6.831 E181.95576 ; fill | |
| G1 X6.515 Y-6.831 E181.97589 ; fill | |
| G1 X6.515 Y-7.413 E181.98850 ; fill | |
| G1 X7.445 Y-7.413 E182.00863 ; fill | |
| G1 X7.445 Y-7.996 E182.02124 ; fill | |
| G1 X6.515 Y-7.996 E182.04137 ; fill | |
| G1 X6.515 Y-8.579 E182.05399 ; fill | |
| G1 X7.445 Y-8.579 E182.07412 ; fill | |
| G1 X7.445 Y-9.161 E182.08673 ; fill | |
| G1 X6.515 Y-9.161 E182.10686 ; fill | |
| G1 X5.806 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E182.88599 F600.000 ; fill | |
| G1 X8.154 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E183.20623 F600.000 ; fill | |
| M73 P6 ; update progress | |
| G1 F2100.000 E178.20623 ; retract | |
| G1 Z1.600 F7800.000 ; move to next layer (11) and lift | |
| G1 X7.971 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.400 F7800.000 ; restore layer Z | |
| G1 E183.20623 F2100.000 ; compensate retraction | |
| G1 X5.989 Y0.581 E183.24912 F2073.381 ; perimeter | |
| G1 X5.989 Y-9.581 E183.46909 ; perimeter | |
| G1 X7.971 Y-9.581 E183.51199 ; perimeter | |
| G1 X7.971 Y0.521 E183.73066 ; perimeter | |
| G1 X8.549 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E183.93924 F2073.381 ; perimeter | |
| G1 X18.184 Y1.159 E183.96801 ; perimeter | |
| G1 X-18.184 Y1.159 E184.75530 ; perimeter | |
| G1 X-18.184 Y-0.169 E184.78407 ; perimeter | |
| G1 X5.411 Y-0.169 E185.29485 ; perimeter | |
| G1 X5.411 Y-10.159 E185.51111 ; perimeter | |
| G1 X8.549 Y-10.159 E185.57905 ; perimeter | |
| G1 X8.549 Y-0.229 E185.79401 ; perimeter | |
| G1 X9.128 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E186.00258 F2073.381 ; perimeter | |
| G1 X18.763 Y1.738 E186.05640 ; perimeter | |
| G1 X-18.763 Y1.738 E186.86874 ; perimeter | |
| G1 X-18.763 Y-0.748 E186.92255 ; perimeter | |
| G1 X4.832 Y-0.748 E187.43333 ; perimeter | |
| G1 X4.832 Y-10.738 E187.64959 ; perimeter | |
| G1 X9.128 Y-10.738 E187.74258 ; perimeter | |
| G1 X9.128 Y-0.808 E187.95754 ; perimeter | |
| G1 X9.706 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E188.16612 F2073.381 ; perimeter | |
| G1 X19.341 Y2.316 E188.24498 ; perimeter | |
| G1 X-19.341 Y2.316 E189.08237 ; perimeter | |
| G1 X-19.341 Y-1.326 E189.16123 ; perimeter | |
| G1 X4.254 Y-1.326 E189.67201 ; perimeter | |
| G1 X4.254 Y-11.316 E189.88827 ; perimeter | |
| G1 X9.706 Y-11.316 E190.00631 ; perimeter | |
| G1 X9.706 Y-1.386 E190.22127 ; perimeter | |
| G1 X10.185 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E190.35774 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E190.42290 ; perimeter | |
| G1 X-19.820 Y2.795 E190.98436 ; perimeter | |
| G1 X-19.820 Y-1.805 E191.04951 ; perimeter | |
| G1 X3.775 Y-1.805 E191.38372 ; perimeter | |
| G1 X3.775 Y-11.795 E191.52522 ; perimeter | |
| G1 X10.185 Y-11.795 E191.61600 ; perimeter | |
| G1 X10.185 Y-1.865 E191.75665 ; perimeter | |
| G1 X10.185 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.551 Y-9.161 F7800.000 ; move to first fill point | |
| G1 X7.551 Y0.161 E191.95847 F3110.071 ; fill | |
| G1 X6.409 Y0.161 E191.98320 ; fill | |
| G1 X6.409 Y-9.161 E192.18502 ; fill | |
| G1 X5.700 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E192.96066 F600.000 ; fill | |
| G1 X8.260 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E193.27740 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P6 ; update progress | |
| G1 F2100.000 E188.27740 ; retract | |
| G1 Z1.700 F7800.000 ; move to next layer (12) and lift | |
| G1 X8.061 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.500 F7800.000 ; restore layer Z | |
| G1 E193.27740 F2100.000 ; compensate retraction | |
| G1 X5.899 Y0.581 E193.32419 F4800.000 ; perimeter | |
| G1 X5.899 Y-9.581 E193.54416 ; perimeter | |
| G1 X8.061 Y-9.581 E193.59095 ; perimeter | |
| G1 X8.061 Y0.521 E193.80963 ; perimeter | |
| G1 X8.639 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E194.01626 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E194.04502 ; perimeter | |
| G1 X-18.184 Y1.159 E194.83232 ; perimeter | |
| G1 X-18.184 Y-0.169 E194.86109 ; perimeter | |
| G1 X5.321 Y-0.169 E195.36991 ; perimeter | |
| G1 X5.321 Y-10.159 E195.58617 ; perimeter | |
| G1 X8.639 Y-10.159 E195.65801 ; perimeter | |
| G1 X8.639 Y-0.229 E195.87297 ; perimeter | |
| G1 X9.218 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E196.07960 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E196.13341 ; perimeter | |
| G1 X-18.763 Y1.738 E196.94576 ; perimeter | |
| G1 X-18.763 Y-0.748 E196.99957 ; perimeter | |
| G1 X4.742 Y-0.748 E197.50840 ; perimeter | |
| G1 X4.742 Y-10.738 E197.72466 ; perimeter | |
| G1 X9.218 Y-10.738 E197.82155 ; perimeter | |
| G1 X9.218 Y-0.808 E198.03651 ; perimeter | |
| G1 X9.796 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E198.24314 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E198.32200 ; perimeter | |
| G1 X-19.341 Y2.316 E199.15939 ; perimeter | |
| G1 X-19.341 Y-1.326 E199.23825 ; perimeter | |
| G1 X4.164 Y-1.326 E199.74708 ; perimeter | |
| G1 X4.164 Y-11.316 E199.96334 ; perimeter | |
| G1 X9.796 Y-11.316 E200.08527 ; perimeter | |
| G1 X9.796 Y-1.386 E200.30023 ; perimeter | |
| G1 X10.275 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E200.43543 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E200.50059 ; perimeter | |
| G1 X-19.820 Y2.795 E201.06205 ; perimeter | |
| G1 X-19.820 Y-1.805 E201.12720 ; perimeter | |
| G1 X3.685 Y-1.805 E201.46013 ; perimeter | |
| G1 X3.685 Y-11.795 E201.60163 ; perimeter | |
| G1 X10.275 Y-11.795 E201.69497 ; perimeter | |
| G1 X10.275 Y-1.865 E201.83562 ; perimeter | |
| G1 X10.275 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.641 Y0.161 F7800.000 ; move to first fill point | |
| G1 X6.319 Y0.161 E201.86425 F7200.000 ; fill | |
| G1 X6.319 Y-0.421 E201.87687 ; fill | |
| G1 X7.641 Y-0.421 E201.90550 ; fill | |
| G1 X7.641 Y-1.004 E201.91811 ; fill | |
| G1 X6.319 Y-1.004 E201.94674 ; fill | |
| G1 X6.319 Y-1.587 E201.95936 ; fill | |
| G1 X7.641 Y-1.587 E201.98799 ; fill | |
| G1 X7.641 Y-2.169 E202.00060 ; fill | |
| G1 X6.319 Y-2.169 E202.02924 ; fill | |
| G1 X6.319 Y-2.752 E202.04185 ; fill | |
| G1 X7.641 Y-2.752 E202.07048 ; fill | |
| G1 X7.641 Y-3.335 E202.08310 ; fill | |
| G1 X6.319 Y-3.335 E202.11173 ; fill | |
| G1 X6.319 Y-3.917 E202.12434 ; fill | |
| G1 X7.641 Y-3.917 E202.15297 ; fill | |
| G1 X7.641 Y-4.500 E202.16559 ; fill | |
| G1 X6.319 Y-4.500 E202.19422 ; fill | |
| G1 X6.319 Y-5.083 E202.20683 ; fill | |
| G1 X7.641 Y-5.083 E202.23547 ; fill | |
| G1 X7.641 Y-5.665 E202.24808 ; fill | |
| G1 X6.319 Y-5.665 E202.27671 ; fill | |
| G1 X6.319 Y-6.248 E202.28933 ; fill | |
| G1 X7.641 Y-6.248 E202.31796 ; fill | |
| G1 X7.641 Y-6.831 E202.33057 ; fill | |
| G1 X6.319 Y-6.831 E202.35920 ; fill | |
| G1 X6.319 Y-7.413 E202.37182 ; fill | |
| G1 X7.641 Y-7.413 E202.40045 ; fill | |
| G1 X7.641 Y-7.996 E202.41306 ; fill | |
| G1 X6.319 Y-7.996 E202.44170 ; fill | |
| G1 X6.319 Y-8.579 E202.45431 ; fill | |
| G1 X7.641 Y-8.579 E202.48294 ; fill | |
| G1 X7.641 Y-9.161 E202.49556 ; fill | |
| G1 X6.319 Y-9.161 E202.52419 ; fill | |
| G1 X5.610 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E203.29687 F600.000 ; fill | |
| G1 X8.350 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E203.61064 F600.000 ; fill | |
| M73 P7 ; update progress | |
| G1 F2100.000 E198.61064 ; retract | |
| G1 Z1.800 F7800.000 ; move to next layer (5) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E203.61064 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E203.61125 F600.000 ; support material | |
| G1 X18.859 Y3.974 E203.63027 ; support material | |
| G1 X18.859 Y4.016 E203.63088 ; support material | |
| G1 X20.201 Y4.016 E203.64990 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E203.66123 F600.000 ; support material | |
| G1 X18.480 Y3.595 E203.69098 ; support material | |
| G1 X18.480 Y4.395 E203.70231 ; support material | |
| G1 X20.580 Y4.395 E203.73205 ; support material | |
| G1 F2100.000 E198.73205 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E203.73205 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E203.74226 F600.000 ; support material | |
| G1 X20.013 Y10.899 E203.77268 ; support material | |
| G1 X17.705 Y10.831 E203.80539 ; support material | |
| G1 X16.294 Y13.116 E203.84344 ; support material | |
| G1 X21.141 Y13.116 E203.91210 ; support material | |
| G1 X21.141 Y12.595 E203.91949 ; support material | |
| G1 X20.335 Y11.098 E203.94357 ; support material | |
| G1 X21.141 Y9.792 E203.96531 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E204.01022 F600.000 ; support material | |
| G1 X12.099 Y10.855 E204.04237 ; support material | |
| G1 X13.195 Y12.888 E204.07508 ; support material | |
| G1 X13.054 Y13.116 E204.07888 ; support material | |
| G1 X13.498 Y13.116 E204.08518 ; support material | |
| G1 X13.517 Y13.087 E204.08568 ; support material | |
| G1 X14.519 Y13.116 E204.09988 ; support material | |
| G1 X15.849 Y13.116 E204.11872 ; support material | |
| G1 X17.383 Y10.632 E204.16007 ; support material | |
| G1 X16.462 Y8.924 E204.18756 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E204.25115 F600.000 ; support material | |
| G1 X9.147 Y10.389 E204.27473 ; support material | |
| G1 X7.589 Y12.912 E204.31672 ; support material | |
| G1 X5.281 Y12.844 E204.34943 ; support material | |
| G1 X5.112 Y13.116 E204.35397 ; support material | |
| G1 X7.914 Y13.116 E204.39365 ; support material | |
| G1 X9.469 Y10.588 E204.43570 ; support material | |
| G1 X11.777 Y10.656 E204.46841 ; support material | |
| G1 X12.847 Y8.924 E204.49725 ; support material | |
| G1 F2100.000 E199.49725 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E204.49725 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E204.50858 F600.000 ; support material | |
| G1 X9.236 Y3.595 E204.52761 ; support material | |
| G1 X8.851 Y4.395 E204.54018 ; support material | |
| G1 X10.580 Y4.395 E204.56467 ; support material | |
| G1 F2100.000 E199.56467 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E204.56467 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E204.57097 F600.000 ; support material | |
| G1 X3.541 Y10.413 E204.59577 ; support material | |
| G1 X1.233 Y10.345 E204.62848 ; support material | |
| G1 X-0.325 Y12.868 E204.67047 ; support material | |
| G1 X-0.191 Y13.116 E204.67447 ; support material | |
| G1 X4.668 Y13.116 E204.74329 ; support material | |
| G1 X4.959 Y12.645 E204.75113 ; support material | |
| G1 X3.863 Y10.612 E204.78384 ; support material | |
| G1 X4.906 Y8.924 E204.81195 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E204.82379 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E204.93539 ; support material | |
| G1 X-5.270 Y8.545 E204.94606 ; support material | |
| G1 X-21.520 Y8.545 E205.17623 ; support material | |
| G1 X-21.520 Y13.495 E205.24634 ; support material | |
| G1 X21.520 Y13.495 E205.85596 ; support material | |
| G1 X21.520 Y8.545 E205.92608 ; support material | |
| G1 X2.246 Y8.545 E206.19907 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E206.23086 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E206.27139 ; support material | |
| G1 X-4.372 Y10.369 E206.30799 ; support material | |
| G1 X-3.277 Y12.402 E206.34070 ; support material | |
| G1 X-3.718 Y13.116 E206.35259 ; support material | |
| G1 X-3.273 Y13.116 E206.35889 ; support material | |
| G1 X-2.955 Y12.601 E206.36748 ; support material | |
| G1 X-0.647 Y12.669 E206.40019 ; support material | |
| G1 X0.911 Y10.146 E206.44218 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E206.47547 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E206.49575 ; support material | |
| G1 X-4.891 Y8.924 E206.50642 ; support material | |
| G1 X-7.853 Y8.924 E206.54837 ; support material | |
| G1 X-7.325 Y9.903 E206.56412 ; support material | |
| G1 X-8.883 Y12.426 E206.60612 ; support material | |
| G1 X-11.191 Y12.358 E206.63883 ; support material | |
| G1 X-11.659 Y13.116 E206.65146 ; support material | |
| G1 X-8.296 Y13.116 E206.69910 ; support material | |
| G1 X-8.561 Y12.625 E206.70701 ; support material | |
| G1 X-7.003 Y10.102 E206.74901 ; support material | |
| G1 X-4.695 Y10.170 E206.78172 ; support material | |
| G1 F2100.000 E201.78172 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E206.78172 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E206.79305 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E206.82279 ; support material | |
| G1 X-11.520 Y4.395 E206.83412 ; support material | |
| G1 X-9.420 Y4.395 E206.86387 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E206.86448 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E206.88350 ; support material | |
| G1 X-11.141 Y4.016 E206.88411 ; support material | |
| G1 X-9.799 Y4.016 E206.90313 ; support material | |
| G1 F2100.000 E201.90313 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E206.90313 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E206.92314 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E206.92944 ; support material | |
| G1 X-12.930 Y9.927 E206.94615 ; support material | |
| G1 X-15.239 Y9.859 E206.97886 ; support material | |
| G1 X-16.796 Y12.382 E207.02085 ; support material | |
| G1 X-16.401 Y13.116 E207.03267 ; support material | |
| G1 X-12.104 Y13.116 E207.09353 ; support material | |
| G1 X-11.513 Y12.159 E207.10946 ; support material | |
| G1 X-12.608 Y10.126 E207.14218 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E207.15402 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E207.21485 ; support material | |
| G1 X-20.844 Y9.883 E207.23082 ; support material | |
| G1 X-19.749 Y11.916 E207.26353 ; support material | |
| G1 X-20.490 Y13.116 E207.28351 ; support material | |
| G1 X-20.045 Y13.116 E207.28981 ; support material | |
| G1 X-19.427 Y12.115 E207.30648 ; support material | |
| G1 X-17.119 Y12.183 E207.33919 ; support material | |
| G1 X-15.561 Y9.660 E207.38119 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E207.39318 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E207.39948 ; support material | |
| G1 X-21.141 Y9.644 E207.40968 ; support material | |
| G1 F2100.000 E202.40968 ; retract | |
| G1 Z1.800 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E207.40968 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E207.41598 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E207.41669 ; support material | |
| G1 X-20.018 Y4.016 E207.42299 ; support material | |
| G1 X-19.991 Y3.974 E207.42371 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E207.44212 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E207.45487 ; support material | |
| G1 X-21.520 Y4.395 E207.48461 ; support material | |
| G1 X-19.420 Y4.395 E207.51436 ; support material | |
| G1 X-19.420 Y3.595 E207.52569 ; support material | |
| G1 X-20.620 Y3.595 E207.54269 ; support material | |
| M126 ; enable fan | |
| M73 P7 ; update progress | |
| G1 F2100.000 E202.54269 ; retract | |
| G1 Z1.800 F7800.000 ; move to next layer (13) and lift | |
| G1 X5.809 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.600 F7800.000 ; restore layer Z | |
| G1 E207.54269 F2100.000 ; compensate retraction | |
| G1 X5.809 Y-9.581 E207.76266 F2081.970 ; perimeter | |
| G1 X8.151 Y-9.581 E207.81335 ; perimeter | |
| G1 X8.151 Y0.581 E208.03333 ; perimeter | |
| G1 X5.869 Y0.581 E208.08272 ; perimeter | |
| G1 X5.231 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X5.231 Y-10.159 E208.29898 F2081.970 ; perimeter | |
| G1 X8.729 Y-10.159 E208.37472 ; perimeter | |
| G1 X8.729 Y-0.169 E208.59097 ; perimeter | |
| G1 X18.184 Y-0.169 E208.79565 ; perimeter | |
| G1 X18.184 Y1.159 E208.82442 ; perimeter | |
| G1 X-18.184 Y1.159 E209.61171 ; perimeter | |
| G1 X-18.184 Y-0.169 E209.64048 ; perimeter | |
| G1 X5.171 Y-0.169 E210.14606 ; perimeter | |
| G1 X4.652 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.652 Y-10.738 E210.36232 F2081.970 ; perimeter | |
| G1 X9.308 Y-10.738 E210.46311 ; perimeter | |
| G1 X9.308 Y-0.748 E210.67936 ; perimeter | |
| G1 X18.763 Y-0.748 E210.88404 ; perimeter | |
| G1 X18.763 Y1.738 E210.93786 ; perimeter | |
| G1 X-18.763 Y1.738 E211.75020 ; perimeter | |
| G1 X-18.763 Y-0.748 E211.80401 ; perimeter | |
| G1 X4.592 Y-0.748 E212.30959 ; perimeter | |
| G1 X4.074 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X4.074 Y-11.316 E212.52585 F2081.970 ; perimeter | |
| G1 X9.886 Y-11.316 E212.65169 ; perimeter | |
| G1 X9.886 Y-1.326 E212.86795 ; perimeter | |
| G1 X19.341 Y-1.326 E213.07263 ; perimeter | |
| G1 X19.341 Y2.316 E213.15149 ; perimeter | |
| G1 X-19.341 Y2.316 E213.98888 ; perimeter | |
| G1 X-19.341 Y-1.326 E214.06774 ; perimeter | |
| G1 X4.014 Y-1.326 E214.57332 ; perimeter | |
| G1 X3.595 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.595 Y-11.795 E214.71482 F600.000 ; perimeter | |
| G1 X10.365 Y-11.795 E214.81071 ; perimeter | |
| G1 X10.365 Y-1.805 E214.95221 ; perimeter | |
| G1 X19.820 Y-1.805 E215.08613 ; perimeter | |
| G1 X19.820 Y2.795 E215.15129 ; perimeter | |
| G1 X-19.820 Y2.795 E215.71275 ; perimeter | |
| G1 X-19.820 Y-1.805 E215.77790 ; perimeter | |
| G1 X3.535 Y-1.805 E216.10871 ; perimeter | |
| G1 X3.995 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X6.229 Y0.161 F7800.000 ; move to first fill point | |
| G1 X6.229 Y-9.161 E216.31052 F3122.954 ; fill | |
| G1 X6.980 Y-9.161 E216.32679 ; fill | |
| G1 X6.980 Y0.161 E216.52861 ; fill | |
| G1 X7.731 Y0.161 E216.54487 ; fill | |
| G1 X7.731 Y-9.161 E216.74669 ; fill | |
| G1 X5.520 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E217.51641 F600.000 ; fill | |
| G1 X8.440 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E217.82722 F600.000 ; fill | |
| M73 P8 ; update progress | |
| G1 F2100.000 E212.82722 ; retract | |
| G1 Z1.900 F7800.000 ; move to next layer (14) and lift | |
| G1 X8.241 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.700 F7800.000 ; restore layer Z | |
| G1 E217.82722 F2100.000 ; compensate retraction | |
| G1 X5.719 Y0.581 E217.88181 F2091.088 ; perimeter | |
| G1 X5.719 Y-9.581 E218.10179 ; perimeter | |
| G1 X8.241 Y-9.581 E218.15637 ; perimeter | |
| G1 X8.241 Y0.521 E218.37505 ; perimeter | |
| G1 X8.819 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E218.57778 F2091.088 ; perimeter | |
| G1 X18.184 Y1.159 E218.60655 ; perimeter | |
| G1 X-18.184 Y1.159 E219.39384 ; perimeter | |
| G1 X-18.184 Y-0.169 E219.42261 ; perimeter | |
| G1 X5.141 Y-0.169 E219.92754 ; perimeter | |
| G1 X5.141 Y-10.159 E220.14380 ; perimeter | |
| G1 X8.819 Y-10.159 E220.22343 ; perimeter | |
| G1 X8.819 Y-0.229 E220.43839 ; perimeter | |
| G1 X9.398 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E220.64112 F2091.088 ; perimeter | |
| G1 X18.763 Y1.738 E220.69494 ; perimeter | |
| G1 X-18.763 Y1.738 E221.50728 ; perimeter | |
| G1 X-18.763 Y-0.748 E221.56109 ; perimeter | |
| G1 X4.562 Y-0.748 E222.06602 ; perimeter | |
| G1 X4.562 Y-10.738 E222.28228 ; perimeter | |
| G1 X9.398 Y-10.738 E222.38697 ; perimeter | |
| G1 X9.398 Y-0.808 E222.60193 ; perimeter | |
| G1 X9.976 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E222.80466 F2091.088 ; perimeter | |
| G1 X19.341 Y2.316 E222.88352 ; perimeter | |
| G1 X-19.341 Y2.316 E223.72091 ; perimeter | |
| G1 X-19.341 Y-1.326 E223.79977 ; perimeter | |
| G1 X3.984 Y-1.326 E224.30470 ; perimeter | |
| G1 X3.984 Y-11.316 E224.52096 ; perimeter | |
| G1 X9.976 Y-11.316 E224.65069 ; perimeter | |
| G1 X9.976 Y-1.386 E224.86565 ; perimeter | |
| G1 X10.455 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E224.99830 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E225.06346 ; perimeter | |
| G1 X-19.820 Y2.795 E225.62492 ; perimeter | |
| G1 X-19.820 Y-1.805 E225.69007 ; perimeter | |
| G1 X3.505 Y-1.805 E226.02045 ; perimeter | |
| G1 X3.505 Y-11.795 E226.16195 ; perimeter | |
| G1 X10.455 Y-11.795 E226.26039 ; perimeter | |
| G1 X10.455 Y-1.865 E226.40104 ; perimeter | |
| G1 X10.455 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.821 Y0.161 F7800.000 ; move to first fill point | |
| G1 X6.139 Y0.161 E226.43747 F3136.632 ; fill | |
| G1 X6.139 Y-0.421 E226.45008 ; fill | |
| G1 X7.821 Y-0.421 E226.48651 ; fill | |
| G1 X7.821 Y-1.004 E226.49912 ; fill | |
| G1 X6.139 Y-1.004 E226.53555 ; fill | |
| G1 X6.139 Y-1.587 E226.54817 ; fill | |
| G1 X7.821 Y-1.587 E226.58460 ; fill | |
| G1 X7.821 Y-2.169 E226.59721 ; fill | |
| G1 X6.139 Y-2.169 E226.63364 ; fill | |
| G1 X6.139 Y-2.752 E226.64625 ; fill | |
| G1 X7.821 Y-2.752 E226.68268 ; fill | |
| G1 X7.821 Y-3.335 E226.69529 ; fill | |
| G1 X6.139 Y-3.335 E226.73172 ; fill | |
| G1 X6.139 Y-3.917 E226.74434 ; fill | |
| G1 X7.821 Y-3.917 E226.78077 ; fill | |
| G1 X7.821 Y-4.500 E226.79338 ; fill | |
| G1 X6.139 Y-4.500 E226.82981 ; fill | |
| G1 X6.139 Y-5.083 E226.84242 ; fill | |
| G1 X7.821 Y-5.083 E226.87885 ; fill | |
| G1 X7.821 Y-5.665 E226.89146 ; fill | |
| G1 X6.139 Y-5.665 E226.92789 ; fill | |
| G1 X6.139 Y-6.248 E226.94051 ; fill | |
| G1 X7.821 Y-6.248 E226.97693 ; fill | |
| G1 X7.821 Y-6.831 E226.98955 ; fill | |
| G1 X6.139 Y-6.831 E227.02598 ; fill | |
| G1 X6.139 Y-7.413 E227.03859 ; fill | |
| G1 X7.821 Y-7.413 E227.07502 ; fill | |
| G1 X7.821 Y-7.996 E227.08763 ; fill | |
| G1 X6.139 Y-7.996 E227.12406 ; fill | |
| G1 X6.139 Y-8.579 E227.13668 ; fill | |
| G1 X7.821 Y-8.579 E227.17310 ; fill | |
| G1 X7.821 Y-9.161 E227.18572 ; fill | |
| G1 X6.139 Y-9.161 E227.22215 ; fill | |
| G1 X5.430 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E227.98891 F600.000 ; fill | |
| G1 X8.530 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E228.29676 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P8 ; update progress | |
| G1 F2100.000 E223.29676 ; retract | |
| G1 Z2.000 F7800.000 ; move to next layer (15) and lift | |
| G1 X8.331 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.800 F7800.000 ; restore layer Z | |
| G1 E228.29676 F2100.000 ; compensate retraction | |
| G1 X5.629 Y0.581 E228.35525 F4800.000 ; perimeter | |
| G1 X5.629 Y-9.581 E228.57522 ; perimeter | |
| G1 X8.331 Y-9.581 E228.63371 ; perimeter | |
| G1 X8.331 Y0.521 E228.85239 ; perimeter | |
| G1 X8.909 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.184 Y-0.169 E229.05317 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E229.08193 ; perimeter | |
| G1 X-18.184 Y1.159 E229.86923 ; perimeter | |
| G1 X-18.184 Y-0.169 E229.89799 ; perimeter | |
| G1 X5.051 Y-0.169 E230.40098 ; perimeter | |
| G1 X5.051 Y-10.159 E230.61723 ; perimeter | |
| G1 X8.909 Y-10.159 E230.70077 ; perimeter | |
| G1 X8.909 Y-0.229 E230.91573 ; perimeter | |
| G1 X9.488 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E231.11651 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E231.17032 ; perimeter | |
| G1 X-18.763 Y1.738 E231.98267 ; perimeter | |
| G1 X-18.763 Y-0.748 E232.03648 ; perimeter | |
| G1 X4.472 Y-0.748 E232.53946 ; perimeter | |
| G1 X4.472 Y-10.738 E232.75572 ; perimeter | |
| G1 X9.488 Y-10.738 E232.86430 ; perimeter | |
| G1 X9.488 Y-0.808 E233.07926 ; perimeter | |
| G1 X10.066 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E233.28004 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E233.35891 ; perimeter | |
| G1 X-19.341 Y2.316 E234.19630 ; perimeter | |
| G1 X-19.341 Y-1.326 E234.27516 ; perimeter | |
| G1 X3.894 Y-1.326 E234.77814 ; perimeter | |
| G1 X3.894 Y-11.316 E234.99440 ; perimeter | |
| G1 X10.066 Y-11.316 E235.12803 ; perimeter | |
| G1 X10.066 Y-1.386 E235.34299 ; perimeter | |
| G1 X10.545 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E235.47436 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E235.53952 ; perimeter | |
| G1 X-19.820 Y2.795 E236.10098 ; perimeter | |
| G1 X-19.820 Y-1.805 E236.16613 ; perimeter | |
| G1 X3.415 Y-1.805 E236.49524 ; perimeter | |
| G1 X3.415 Y-11.795 E236.63674 ; perimeter | |
| G1 X10.545 Y-11.795 E236.73773 ; perimeter | |
| G1 X10.545 Y-1.865 E236.87838 ; perimeter | |
| G1 X10.545 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X7.911 Y-9.161 F7800.000 ; move to first fill point | |
| G1 X7.911 Y0.161 E237.08019 F7200.000 ; fill | |
| G1 X7.290 Y0.161 E237.09363 ; fill | |
| G1 X7.290 Y-9.161 E237.29545 ; fill | |
| G1 X6.670 Y-9.161 E237.30889 ; fill | |
| G1 X6.670 Y0.161 E237.51071 ; fill | |
| G1 X6.049 Y0.161 E237.52415 ; fill | |
| G1 X6.049 Y-9.161 E237.72597 ; fill | |
| G1 X5.340 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E238.48977 F600.000 ; fill | |
| G1 X8.620 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E238.79467 F600.000 ; fill | |
| M73 P8 ; update progress | |
| G1 F2100.000 E233.79467 ; retract | |
| G1 Z2.100 F7800.000 ; move to next layer (6) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E238.79467 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E238.79527 F600.000 ; support material | |
| G1 X18.859 Y3.974 E238.81429 ; support material | |
| G1 X18.859 Y4.016 E238.81490 ; support material | |
| G1 X20.201 Y4.016 E238.83392 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E238.84526 F600.000 ; support material | |
| G1 X18.480 Y3.595 E238.87500 ; support material | |
| G1 X18.480 Y4.395 E238.88633 ; support material | |
| G1 X20.580 Y4.395 E238.91608 ; support material | |
| G1 F2100.000 E233.91608 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E238.91608 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E238.92628 F600.000 ; support material | |
| G1 X20.013 Y10.899 E238.95670 ; support material | |
| G1 X17.705 Y10.831 E238.98942 ; support material | |
| G1 X16.294 Y13.116 E239.02746 ; support material | |
| G1 X21.141 Y13.116 E239.09613 ; support material | |
| G1 X21.141 Y12.595 E239.10352 ; support material | |
| G1 X20.335 Y11.098 E239.12760 ; support material | |
| G1 X21.141 Y9.792 E239.14934 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E239.19424 F600.000 ; support material | |
| G1 X12.099 Y10.855 E239.22639 ; support material | |
| G1 X13.195 Y12.888 E239.25910 ; support material | |
| G1 X13.054 Y13.116 E239.26291 ; support material | |
| G1 X13.498 Y13.116 E239.26921 ; support material | |
| G1 X13.517 Y13.087 E239.26970 ; support material | |
| G1 X14.519 Y13.116 E239.28391 ; support material | |
| G1 X15.849 Y13.116 E239.30274 ; support material | |
| G1 X17.383 Y10.632 E239.34409 ; support material | |
| G1 X16.462 Y8.924 E239.37158 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E239.43517 F600.000 ; support material | |
| G1 X9.147 Y10.389 E239.45875 ; support material | |
| G1 X7.589 Y12.912 E239.50074 ; support material | |
| G1 X5.281 Y12.844 E239.53346 ; support material | |
| G1 X5.112 Y13.116 E239.53799 ; support material | |
| G1 X7.914 Y13.116 E239.57768 ; support material | |
| G1 X9.469 Y10.588 E239.61972 ; support material | |
| G1 X11.777 Y10.656 E239.65243 ; support material | |
| G1 X12.847 Y8.924 E239.68127 ; support material | |
| G1 F2100.000 E234.68127 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E239.68127 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E239.69260 F600.000 ; support material | |
| G1 X9.236 Y3.595 E239.71163 ; support material | |
| G1 X8.851 Y4.395 E239.72421 ; support material | |
| G1 X10.580 Y4.395 E239.74869 ; support material | |
| G1 F2100.000 E234.74869 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E239.74869 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E239.75499 F600.000 ; support material | |
| G1 X3.541 Y10.413 E239.77979 ; support material | |
| G1 X1.233 Y10.345 E239.81250 ; support material | |
| G1 X-0.325 Y12.868 E239.85450 ; support material | |
| G1 X-0.191 Y13.116 E239.85849 ; support material | |
| G1 X4.668 Y13.116 E239.92731 ; support material | |
| G1 X4.959 Y12.645 E239.93516 ; support material | |
| G1 X3.863 Y10.612 E239.96787 ; support material | |
| G1 X4.906 Y8.924 E239.99597 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E240.00782 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E240.11941 ; support material | |
| G1 X-5.270 Y8.545 E240.13009 ; support material | |
| G1 X-21.520 Y8.545 E240.36025 ; support material | |
| G1 X-21.520 Y13.495 E240.43036 ; support material | |
| G1 X21.520 Y13.495 E241.03999 ; support material | |
| G1 X21.520 Y8.545 E241.11010 ; support material | |
| G1 X2.246 Y8.545 E241.38309 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E241.41488 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E241.45541 ; support material | |
| G1 X-4.372 Y10.369 E241.49201 ; support material | |
| G1 X-3.277 Y12.402 E241.52472 ; support material | |
| G1 X-3.718 Y13.116 E241.53662 ; support material | |
| G1 X-3.273 Y13.116 E241.54292 ; support material | |
| G1 X-2.955 Y12.601 E241.55150 ; support material | |
| G1 X-0.647 Y12.669 E241.58421 ; support material | |
| G1 X0.911 Y10.146 E241.62621 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E241.65950 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E241.67977 ; support material | |
| G1 X-4.891 Y8.924 E241.69044 ; support material | |
| G1 X-7.853 Y8.924 E241.73239 ; support material | |
| G1 X-7.325 Y9.903 E241.74815 ; support material | |
| G1 X-8.883 Y12.426 E241.79014 ; support material | |
| G1 X-11.191 Y12.358 E241.82285 ; support material | |
| G1 X-11.659 Y13.116 E241.83548 ; support material | |
| G1 X-8.296 Y13.116 E241.88312 ; support material | |
| G1 X-8.561 Y12.625 E241.89103 ; support material | |
| G1 X-7.003 Y10.102 E241.93303 ; support material | |
| G1 X-4.695 Y10.170 E241.96574 ; support material | |
| G1 F2100.000 E236.96574 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E241.96574 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E241.97707 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E242.00681 ; support material | |
| G1 X-11.520 Y4.395 E242.01815 ; support material | |
| G1 X-9.420 Y4.395 E242.04789 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E242.04850 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E242.06752 ; support material | |
| G1 X-11.141 Y4.016 E242.06813 ; support material | |
| G1 X-9.799 Y4.016 E242.08715 ; support material | |
| G1 F2100.000 E237.08715 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E242.08715 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E242.10716 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E242.11346 ; support material | |
| G1 X-12.930 Y9.927 E242.13017 ; support material | |
| G1 X-15.239 Y9.859 E242.16288 ; support material | |
| G1 X-16.796 Y12.382 E242.20488 ; support material | |
| G1 X-16.401 Y13.116 E242.21669 ; support material | |
| G1 X-12.104 Y13.116 E242.27755 ; support material | |
| G1 X-11.513 Y12.159 E242.29349 ; support material | |
| G1 X-12.608 Y10.126 E242.32620 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E242.33805 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E242.39887 ; support material | |
| G1 X-20.844 Y9.883 E242.41484 ; support material | |
| G1 X-19.749 Y11.916 E242.44755 ; support material | |
| G1 X-20.490 Y13.116 E242.46753 ; support material | |
| G1 X-20.045 Y13.116 E242.47383 ; support material | |
| G1 X-19.427 Y12.115 E242.49051 ; support material | |
| G1 X-17.119 Y12.183 E242.52322 ; support material | |
| G1 X-15.561 Y9.660 E242.56521 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E242.57720 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E242.58350 ; support material | |
| G1 X-21.141 Y9.644 E242.59370 ; support material | |
| G1 F2100.000 E237.59370 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E242.59370 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E242.60000 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E242.60071 ; support material | |
| G1 X-20.018 Y4.016 E242.60702 ; support material | |
| G1 X-19.991 Y3.974 E242.60773 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E242.62614 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E242.63889 ; support material | |
| G1 X-21.520 Y4.395 E242.66864 ; support material | |
| G1 X-19.420 Y4.395 E242.69838 ; support material | |
| G1 X-19.420 Y3.595 E242.70971 ; support material | |
| G1 X-20.620 Y3.595 E242.72671 ; support material | |
| M126 ; enable fan | |
| M73 P9 ; update progress | |
| G1 F2100.000 E237.72671 ; retract | |
| G1 Z2.100 F7800.000 ; move to next layer (16) and lift | |
| G1 X5.539 Y0.581 F7800.000 ; move to first perimeter point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E242.72671 F2100.000 ; compensate retraction | |
| G1 X5.539 Y-9.581 E242.94668 F2092.008 ; perimeter | |
| G1 X8.421 Y-9.581 E243.00907 ; perimeter | |
| G1 X8.421 Y0.581 E243.22904 ; perimeter | |
| G1 X5.599 Y0.581 E243.29013 ; perimeter | |
| G1 X4.961 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X4.961 Y-10.159 E243.50639 F2092.008 ; perimeter | |
| G1 X8.999 Y-10.159 E243.59382 ; perimeter | |
| G1 X8.999 Y-0.169 E243.81008 ; perimeter | |
| G1 X18.184 Y-0.169 E244.00891 ; perimeter | |
| G1 X18.184 Y1.159 E244.03768 ; perimeter | |
| G1 X-18.184 Y1.159 E244.82497 ; perimeter | |
| G1 X-18.184 Y-0.169 E244.85374 ; perimeter | |
| G1 X4.901 Y-0.169 E245.35347 ; perimeter | |
| G1 X4.382 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.382 Y-10.738 E245.56973 F2092.008 ; perimeter | |
| G1 X9.578 Y-10.738 E245.68221 ; perimeter | |
| G1 X9.578 Y-0.748 E245.89847 ; perimeter | |
| G1 X18.763 Y-0.748 E246.09730 ; perimeter | |
| G1 X18.763 Y1.738 E246.15112 ; perimeter | |
| G1 X-18.763 Y1.738 E246.96346 ; perimeter | |
| G1 X-18.763 Y-0.748 E247.01727 ; perimeter | |
| G1 X4.322 Y-0.748 E247.51701 ; perimeter | |
| G1 X3.803 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.803 Y-11.316 E247.73327 F2092.008 ; perimeter | |
| G1 X10.157 Y-11.316 E247.87079 ; perimeter | |
| G1 X10.157 Y-1.326 E248.08705 ; perimeter | |
| G1 X19.341 Y-1.326 E248.28589 ; perimeter | |
| G1 X19.341 Y2.316 E248.36475 ; perimeter | |
| G1 X-19.341 Y2.316 E249.20214 ; perimeter | |
| G1 X-19.341 Y-1.326 E249.28100 ; perimeter | |
| G1 X3.743 Y-1.326 E249.78073 ; perimeter | |
| G1 X3.325 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.325 Y-11.795 E249.92223 F600.000 ; perimeter | |
| G1 X10.635 Y-11.795 E250.02577 ; perimeter | |
| G1 X10.635 Y-1.805 E250.16727 ; perimeter | |
| G1 X19.820 Y-1.805 E250.29737 ; perimeter | |
| G1 X19.820 Y2.795 E250.36252 ; perimeter | |
| G1 X-19.820 Y2.795 E250.92399 ; perimeter | |
| G1 X-19.820 Y-1.805 E250.98914 ; perimeter | |
| G1 X3.265 Y-1.805 E251.31612 ; perimeter | |
| G1 X3.725 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X6.044 Y-4.780 F7800.000 ; move to first fill point | |
| G1 X7.916 Y-4.780 E251.34264 F3138.012 ; fill | |
| G1 X7.916 Y0.076 E251.41142 ; fill | |
| G1 X6.044 Y0.076 E251.43795 ; fill | |
| G1 X6.044 Y-4.720 E251.50588 ; fill | |
| G1 X6.452 Y-4.371 F7800.000 ; move to first fill point | |
| G1 X7.508 Y-4.371 E251.52082 F3138.012 ; fill | |
| G1 X7.508 Y-0.332 E251.57803 ; fill | |
| G1 X6.452 Y-0.332 E251.59298 ; fill | |
| G1 X6.452 Y-4.311 E251.64933 ; fill | |
| G1 X8.001 Y-5.125 F7800.000 ; move to first fill point | |
| G1 X5.959 Y-5.125 E251.69356 F3138.012 ; fill | |
| G1 X5.959 Y-5.798 E251.70812 ; fill | |
| G1 X8.001 Y-5.798 E251.75235 ; fill | |
| G1 X8.001 Y-6.471 E251.76691 ; fill | |
| G1 X5.959 Y-6.471 E251.81113 ; fill | |
| G1 X5.959 Y-7.143 E251.82569 ; fill | |
| G1 X8.001 Y-7.143 E251.86992 ; fill | |
| G1 X8.001 Y-7.816 E251.88448 ; fill | |
| G1 X5.959 Y-7.816 E251.92871 ; fill | |
| G1 X5.959 Y-8.489 E251.94327 ; fill | |
| G1 X8.001 Y-8.489 E251.98749 ; fill | |
| G1 X8.001 Y-9.161 E252.00206 ; fill | |
| G1 X5.959 Y-9.161 E252.04628 ; fill | |
| G1 X5.250 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E252.80712 F600.000 ; fill | |
| G1 F2100.000 E247.80712 ; retract | |
| G1 Z2.100 F7800.000 ; lift plate during travel | |
| G1 X8.710 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z1.900 F7800.000 ; restore layer Z | |
| G1 E252.80712 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E253.10906 F600.000 ; fill | |
| M73 P9 ; update progress | |
| G1 F2100.000 E248.10906 ; retract | |
| G1 Z2.200 F7800.000 ; move to next layer (17) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.000 F7800.000 ; restore layer Z | |
| G1 E253.10906 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E253.13782 F2233.086 ; perimeter | |
| G1 X9.024 Y1.159 E253.33612 ; perimeter | |
| G1 X9.024 Y-0.169 E253.36489 ; perimeter | |
| G1 X18.124 Y-0.169 E253.56189 ; perimeter | |
| G1 F2100.000 E248.56189 ; retract | |
| G1 Z2.200 F7800.000 ; lift plate during travel | |
| G1 X8.511 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.000 F7800.000 ; restore layer Z | |
| G1 E253.56189 F2100.000 ; compensate retraction | |
| G1 X5.449 Y-4.409 E253.62817 F2233.086 ; perimeter | |
| G1 X5.449 Y-9.581 E253.74013 ; perimeter | |
| G1 X8.511 Y-9.581 E253.80641 ; perimeter | |
| G1 X8.511 Y-4.469 E253.91706 ; perimeter | |
| G1 X9.089 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.871 Y-3.831 E254.00839 F2233.086 ; perimeter | |
| G1 X4.871 Y-10.159 E254.14540 ; perimeter | |
| G1 X9.089 Y-10.159 E254.23673 ; perimeter | |
| G1 X9.089 Y-3.891 E254.37243 ; perimeter | |
| G1 F2100.000 E249.37243 ; retract | |
| G1 Z2.200 F7800.000 ; lift plate during travel | |
| G1 X4.936 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.000 F7800.000 ; restore layer Z | |
| G1 E254.37243 F2100.000 ; compensate retraction | |
| G1 X4.936 Y1.159 E254.40119 F2233.086 ; perimeter | |
| G1 X-18.184 Y1.159 E254.90170 ; perimeter | |
| G1 X-18.184 Y-0.169 E254.93046 ; perimeter | |
| G1 X4.876 Y-0.169 E255.42966 ; perimeter | |
| G1 X4.292 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.292 Y-10.738 E255.64592 F2233.086 ; perimeter | |
| G1 X9.668 Y-10.738 E255.76230 ; perimeter | |
| G1 X9.668 Y-0.748 E255.97856 ; perimeter | |
| G1 X18.763 Y-0.748 E256.17544 ; perimeter | |
| G1 X18.763 Y1.738 E256.22926 ; perimeter | |
| G1 X8.445 Y1.738 E256.45260 ; perimeter | |
| G1 X8.445 Y-3.252 E256.56063 ; perimeter | |
| G1 X5.515 Y-3.252 E256.62407 ; perimeter | |
| G1 X5.515 Y1.738 E256.73209 ; perimeter | |
| G1 X-18.763 Y1.738 E257.25764 ; perimeter | |
| G1 X-18.763 Y-0.748 E257.31146 ; perimeter | |
| G1 X4.232 Y-0.748 E257.80924 ; perimeter | |
| G1 X3.713 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.713 Y-11.316 E258.02550 F2233.086 ; perimeter | |
| G1 X10.247 Y-11.316 E258.16693 ; perimeter | |
| G1 X10.247 Y-1.326 E258.38319 ; perimeter | |
| G1 X19.341 Y-1.326 E258.58007 ; perimeter | |
| G1 X19.341 Y2.316 E258.65893 ; perimeter | |
| G1 X7.867 Y2.316 E258.90733 ; perimeter | |
| G1 X7.867 Y-2.674 E259.01535 ; perimeter | |
| G1 X6.093 Y-2.674 E259.05375 ; perimeter | |
| G1 X6.093 Y2.316 E259.16177 ; perimeter | |
| G1 X-19.341 Y2.316 E259.71236 ; perimeter | |
| G1 X-19.341 Y-1.326 E259.79123 ; perimeter | |
| G1 X3.653 Y-1.326 E260.28901 ; perimeter | |
| G1 X3.235 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.235 Y-11.795 E260.43051 F600.000 ; perimeter | |
| G1 X10.725 Y-11.795 E260.53660 ; perimeter | |
| G1 X10.725 Y-1.805 E260.67810 ; perimeter | |
| G1 X19.820 Y-1.805 E260.80692 ; perimeter | |
| G1 X19.820 Y2.795 E260.87208 ; perimeter | |
| G1 X7.388 Y2.795 E261.04816 ; perimeter | |
| G1 X7.388 Y-2.195 E261.11884 ; perimeter | |
| G1 X6.572 Y-2.195 E261.13040 ; perimeter | |
| G1 X6.572 Y2.795 E261.20108 ; perimeter | |
| G1 X-19.820 Y2.795 E261.57490 ; perimeter | |
| G1 X-19.820 Y-1.805 E261.64005 ; perimeter | |
| G1 X3.175 Y-1.805 E261.96575 ; perimeter | |
| G1 X3.635 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.868 Y-9.161 F7800.000 ; move to first fill point | |
| G1 X5.868 Y-4.829 E262.05955 F3349.629 ; fill | |
| G1 X6.609 Y-4.829 E262.07559 ; fill | |
| G1 X6.609 Y-9.161 E262.16938 ; fill | |
| G1 X7.350 Y-9.161 E262.18543 ; fill | |
| G1 X7.350 Y-4.829 E262.27922 ; fill | |
| G1 X8.092 Y-4.829 E262.29526 ; fill | |
| G1 X8.092 Y-9.161 E262.38906 ; fill | |
| G1 X9.057 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X9.057 Y-0.459 E262.49039 F600.000 ; fill | |
| G1 F2100.000 E257.49039 ; retract | |
| G1 Z2.200 F7800.000 ; lift plate during travel | |
| G1 X4.903 Y-0.459 F7800.000 ; move to first fill point | |
| G1 Z2.000 F7800.000 ; restore layer Z | |
| G1 E262.49039 F2100.000 ; compensate retraction | |
| G1 X4.903 Y-3.541 E262.59173 F600.000 ; fill | |
| G1 X4.647 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E263.33275 F600.000 ; fill | |
| G1 F2100.000 E258.33275 ; retract | |
| G1 Z2.200 F7800.000 ; lift plate during travel | |
| G1 X9.313 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.000 F7800.000 ; restore layer Z | |
| G1 E263.33275 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E263.61486 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P10 ; update progress | |
| G1 F2100.000 E258.61486 ; retract | |
| G1 Z2.300 F7800.000 ; move to next layer (18) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.100 F7800.000 ; restore layer Z | |
| G1 E263.61486 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E263.64362 F4800.000 ; perimeter | |
| G1 X9.397 Y1.159 E263.83384 ; perimeter | |
| G1 X9.397 Y-0.169 E263.86261 ; perimeter | |
| G1 X18.124 Y-0.169 E264.05153 ; perimeter | |
| G1 F2100.000 E259.05153 ; retract | |
| G1 Z2.300 F7800.000 ; lift plate during travel | |
| G1 X8.601 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.100 F7800.000 ; restore layer Z | |
| G1 E264.05153 F2100.000 ; compensate retraction | |
| G1 X5.359 Y-4.409 E264.12171 F4800.000 ; perimeter | |
| G1 X5.359 Y-9.581 E264.23367 ; perimeter | |
| G1 X8.601 Y-9.581 E264.30385 ; perimeter | |
| G1 X8.601 Y-4.469 E264.41450 ; perimeter | |
| G1 X9.180 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.780 Y-3.831 E264.50973 F4800.000 ; perimeter | |
| G1 X4.780 Y-10.159 E264.64673 ; perimeter | |
| G1 X9.180 Y-10.159 E264.74196 ; perimeter | |
| G1 X9.180 Y-3.891 E264.87766 ; perimeter | |
| G1 F2100.000 E259.87766 ; retract | |
| G1 Z2.300 F7800.000 ; lift plate during travel | |
| G1 X4.563 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.100 F7800.000 ; restore layer Z | |
| G1 E264.87766 F2100.000 ; compensate retraction | |
| G1 X4.563 Y1.159 E264.90643 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E265.39885 ; perimeter | |
| G1 X-18.184 Y-0.169 E265.42762 ; perimeter | |
| G1 X4.503 Y-0.169 E265.91874 ; perimeter | |
| G1 X4.202 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.202 Y-10.738 E266.13500 F4800.000 ; perimeter | |
| G1 X9.758 Y-10.738 E266.25528 ; perimeter | |
| G1 X9.758 Y-0.748 E266.47153 ; perimeter | |
| G1 X18.763 Y-0.748 E266.66647 ; perimeter | |
| G1 X18.763 Y1.738 E266.72028 ; perimeter | |
| G1 X8.819 Y1.738 E266.93555 ; perimeter | |
| G1 X8.819 Y-3.252 E267.04357 ; perimeter | |
| G1 X5.141 Y-3.252 E267.12318 ; perimeter | |
| G1 X5.141 Y1.738 E267.23120 ; perimeter | |
| G1 X-18.763 Y1.738 E267.74867 ; perimeter | |
| G1 X-18.763 Y-0.748 E267.80248 ; perimeter | |
| G1 X4.142 Y-0.748 E268.29832 ; perimeter | |
| G1 X3.623 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.623 Y-11.316 E268.51458 F4800.000 ; perimeter | |
| G1 X10.337 Y-11.316 E268.65990 ; perimeter | |
| G1 X10.337 Y-1.326 E268.87616 ; perimeter | |
| G1 X19.341 Y-1.326 E269.07109 ; perimeter | |
| G1 X19.341 Y2.316 E269.14995 ; perimeter | |
| G1 X8.240 Y2.316 E269.39027 ; perimeter | |
| G1 X8.240 Y-2.674 E269.49829 ; perimeter | |
| G1 X5.720 Y-2.674 E269.55285 ; perimeter | |
| G1 X5.720 Y2.316 E269.66087 ; perimeter | |
| G1 X-19.341 Y2.316 E270.20339 ; perimeter | |
| G1 X-19.341 Y-1.326 E270.28225 ; perimeter | |
| G1 X3.563 Y-1.326 E270.77809 ; perimeter | |
| G1 X3.145 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.145 Y-11.795 E270.91959 F1200.000 ; perimeter | |
| G1 X10.815 Y-11.795 E271.02823 ; perimeter | |
| G1 X10.815 Y-1.805 E271.16973 ; perimeter | |
| G1 X19.820 Y-1.805 E271.29727 ; perimeter | |
| G1 X19.820 Y2.795 E271.36243 ; perimeter | |
| G1 X7.762 Y2.795 E271.53322 ; perimeter | |
| G1 X7.762 Y-2.195 E271.60390 ; perimeter | |
| G1 X6.198 Y-2.195 E271.62604 ; perimeter | |
| G1 X6.198 Y2.795 E271.69672 ; perimeter | |
| G1 X-19.820 Y2.795 E272.06525 ; perimeter | |
| G1 X-19.820 Y-1.805 E272.13040 ; perimeter | |
| G1 X3.085 Y-1.805 E272.45483 ; perimeter | |
| G1 X3.545 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.778 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X8.182 Y-4.829 E272.50685 F7200.000 ; fill | |
| G1 X8.182 Y-5.448 E272.52025 ; fill | |
| G1 X5.778 Y-5.448 E272.57227 ; fill | |
| G1 X5.778 Y-6.067 E272.58567 ; fill | |
| G1 X8.182 Y-6.067 E272.63769 ; fill | |
| G1 X8.182 Y-6.686 E272.65109 ; fill | |
| G1 X5.778 Y-6.686 E272.70311 ; fill | |
| G1 X5.778 Y-7.304 E272.71651 ; fill | |
| G1 X8.182 Y-7.304 E272.76853 ; fill | |
| G1 X8.182 Y-7.923 E272.78193 ; fill | |
| G1 X5.778 Y-7.923 E272.83395 ; fill | |
| G1 X5.778 Y-8.542 E272.84735 ; fill | |
| G1 X8.182 Y-8.542 E272.89937 ; fill | |
| G1 X8.182 Y-9.161 E272.91277 ; fill | |
| G1 X5.778 Y-9.161 E272.96479 ; fill | |
| G1 X4.672 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X4.672 Y-0.459 E272.99692 F600.000 ; fill | |
| G1 X4.274 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E273.72567 F600.000 ; fill | |
| G1 F2100.000 E268.72567 ; retract | |
| G1 Z2.300 F7800.000 ; lift plate during travel | |
| G1 X9.288 Y-0.459 F7800.000 ; move to first fill point | |
| G1 Z2.100 F7800.000 ; restore layer Z | |
| G1 E273.72567 F2100.000 ; compensate retraction | |
| G1 X9.288 Y-3.541 E273.75780 F600.000 ; fill | |
| G1 X9.686 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E274.02764 F600.000 ; fill | |
| M73 P10 ; update progress | |
| G1 F2100.000 E269.02764 ; retract | |
| G1 Z2.400 F7800.000 ; move to next layer (7) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E274.02764 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E274.02825 F600.000 ; support material | |
| G1 X18.859 Y3.974 E274.04727 ; support material | |
| G1 X18.859 Y4.016 E274.04788 ; support material | |
| G1 X20.201 Y4.016 E274.06690 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E274.07823 F600.000 ; support material | |
| G1 X18.480 Y3.595 E274.10797 ; support material | |
| G1 X18.480 Y4.395 E274.11931 ; support material | |
| G1 X20.580 Y4.395 E274.14905 ; support material | |
| G1 F2100.000 E269.14905 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E274.14905 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E274.15926 F600.000 ; support material | |
| G1 X20.013 Y10.899 E274.18968 ; support material | |
| G1 X17.705 Y10.831 E274.22239 ; support material | |
| G1 X16.294 Y13.116 E274.26044 ; support material | |
| G1 X21.141 Y13.116 E274.32910 ; support material | |
| G1 X21.141 Y12.595 E274.33649 ; support material | |
| G1 X20.335 Y11.098 E274.36057 ; support material | |
| G1 X21.141 Y9.792 E274.38231 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E274.42722 F600.000 ; support material | |
| G1 X12.099 Y10.855 E274.45937 ; support material | |
| G1 X13.195 Y12.888 E274.49208 ; support material | |
| G1 X13.054 Y13.116 E274.49588 ; support material | |
| G1 X13.498 Y13.116 E274.50218 ; support material | |
| G1 X13.517 Y13.087 E274.50267 ; support material | |
| G1 X14.519 Y13.116 E274.51688 ; support material | |
| G1 X15.849 Y13.116 E274.53571 ; support material | |
| G1 X17.383 Y10.632 E274.57707 ; support material | |
| G1 X16.462 Y8.924 E274.60456 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E274.66814 F600.000 ; support material | |
| G1 X9.147 Y10.389 E274.69172 ; support material | |
| G1 X7.589 Y12.912 E274.73372 ; support material | |
| G1 X5.281 Y12.844 E274.76643 ; support material | |
| G1 X5.112 Y13.116 E274.77097 ; support material | |
| G1 X7.914 Y13.116 E274.81065 ; support material | |
| G1 X9.469 Y10.588 E274.85269 ; support material | |
| G1 X11.777 Y10.656 E274.88540 ; support material | |
| G1 X12.847 Y8.924 E274.91424 ; support material | |
| G1 F2100.000 E269.91424 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E274.91424 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E274.92557 F600.000 ; support material | |
| G1 X9.236 Y3.595 E274.94460 ; support material | |
| G1 X8.851 Y4.395 E274.95718 ; support material | |
| G1 X10.580 Y4.395 E274.98167 ; support material | |
| G1 F2100.000 E269.98167 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E274.98167 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E274.98797 F600.000 ; support material | |
| G1 X3.541 Y10.413 E275.01276 ; support material | |
| G1 X1.233 Y10.345 E275.04547 ; support material | |
| G1 X-0.325 Y12.868 E275.08747 ; support material | |
| G1 X-0.191 Y13.116 E275.09147 ; support material | |
| G1 X4.668 Y13.116 E275.16028 ; support material | |
| G1 X4.959 Y12.645 E275.16813 ; support material | |
| G1 X3.863 Y10.612 E275.20084 ; support material | |
| G1 X4.906 Y8.924 E275.22894 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E275.24079 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E275.35239 ; support material | |
| G1 X-5.270 Y8.545 E275.36306 ; support material | |
| G1 X-21.520 Y8.545 E275.59323 ; support material | |
| G1 X-21.520 Y13.495 E275.66334 ; support material | |
| G1 X21.520 Y13.495 E276.27296 ; support material | |
| G1 X21.520 Y8.545 E276.34307 ; support material | |
| G1 X2.246 Y8.545 E276.61607 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E276.64786 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E276.68839 ; support material | |
| G1 X-4.372 Y10.369 E276.72499 ; support material | |
| G1 X-3.277 Y12.402 E276.75770 ; support material | |
| G1 X-3.718 Y13.116 E276.76959 ; support material | |
| G1 X-3.273 Y13.116 E276.77589 ; support material | |
| G1 X-2.955 Y12.601 E276.78447 ; support material | |
| G1 X-0.647 Y12.669 E276.81718 ; support material | |
| G1 X0.911 Y10.146 E276.85918 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E276.89247 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E276.91275 ; support material | |
| G1 X-4.891 Y8.924 E276.92342 ; support material | |
| G1 X-7.853 Y8.924 E276.96536 ; support material | |
| G1 X-7.325 Y9.903 E276.98112 ; support material | |
| G1 X-8.883 Y12.426 E277.02312 ; support material | |
| G1 X-11.191 Y12.358 E277.05583 ; support material | |
| G1 X-11.659 Y13.116 E277.06846 ; support material | |
| G1 X-8.296 Y13.116 E277.11610 ; support material | |
| G1 X-8.561 Y12.625 E277.12401 ; support material | |
| G1 X-7.003 Y10.102 E277.16600 ; support material | |
| G1 X-4.695 Y10.170 E277.19871 ; support material | |
| G1 F2100.000 E272.19871 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E277.19871 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E277.21004 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E277.23979 ; support material | |
| G1 X-11.520 Y4.395 E277.25112 ; support material | |
| G1 X-9.420 Y4.395 E277.28087 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E277.28147 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E277.30049 ; support material | |
| G1 X-11.141 Y4.016 E277.30110 ; support material | |
| G1 X-9.799 Y4.016 E277.32012 ; support material | |
| G1 F2100.000 E272.32012 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E277.32012 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E277.34014 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E277.34644 ; support material | |
| G1 X-12.930 Y9.927 E277.36314 ; support material | |
| G1 X-15.239 Y9.859 E277.39585 ; support material | |
| G1 X-16.796 Y12.382 E277.43785 ; support material | |
| G1 X-16.401 Y13.116 E277.44967 ; support material | |
| G1 X-12.104 Y13.116 E277.51053 ; support material | |
| G1 X-11.513 Y12.159 E277.52646 ; support material | |
| G1 X-12.608 Y10.126 E277.55917 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E277.57102 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E277.63185 ; support material | |
| G1 X-20.844 Y9.883 E277.64782 ; support material | |
| G1 X-19.749 Y11.916 E277.68053 ; support material | |
| G1 X-20.490 Y13.116 E277.70051 ; support material | |
| G1 X-20.045 Y13.116 E277.70681 ; support material | |
| G1 X-19.427 Y12.115 E277.72348 ; support material | |
| G1 X-17.119 Y12.183 E277.75619 ; support material | |
| G1 X-15.561 Y9.660 E277.79819 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E277.81018 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E277.81647 ; support material | |
| G1 X-21.141 Y9.644 E277.82667 ; support material | |
| G1 F2100.000 E272.82667 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E277.82667 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E277.83297 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E277.83369 ; support material | |
| G1 X-20.018 Y4.016 E277.83999 ; support material | |
| G1 X-19.991 Y3.974 E277.84070 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E277.85912 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E277.87187 ; support material | |
| G1 X-21.520 Y4.395 E277.90161 ; support material | |
| G1 X-19.420 Y4.395 E277.93135 ; support material | |
| G1 X-19.420 Y3.595 E277.94269 ; support material | |
| G1 X-20.620 Y3.595 E277.95968 ; support material | |
| M126 ; enable fan | |
| M73 P10 ; update progress | |
| G1 F2100.000 E272.95968 ; retract | |
| G1 Z2.400 F7800.000 ; move to next layer (19) and lift | |
| G1 X9.770 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E277.95968 F2100.000 ; compensate retraction | |
| G1 X9.770 Y-0.169 E277.98845 F2113.187 ; perimeter | |
| G1 X18.184 Y-0.169 E278.17059 ; perimeter | |
| G1 X18.184 Y1.159 E278.19935 ; perimeter | |
| G1 X9.830 Y1.159 E278.38020 ; perimeter | |
| G1 X8.662 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 X5.298 Y-4.409 E278.45303 F2113.187 ; perimeter | |
| G1 X5.298 Y-9.581 E278.56499 ; perimeter | |
| G1 X8.662 Y-9.581 E278.63782 ; perimeter | |
| G1 X8.662 Y-4.469 E278.74848 ; perimeter | |
| G1 X9.241 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.719 Y-3.831 E278.84636 F2113.187 ; perimeter | |
| G1 X4.719 Y-10.159 E278.98336 ; perimeter | |
| G1 X9.241 Y-10.159 E279.08125 ; perimeter | |
| G1 X9.241 Y-3.891 E279.21695 ; perimeter | |
| G1 F2100.000 E274.21695 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X4.190 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E279.21695 F2100.000 ; compensate retraction | |
| G1 X4.190 Y1.159 E279.24571 F2113.187 ; perimeter | |
| G1 X-18.184 Y1.159 E279.73006 ; perimeter | |
| G1 X-18.184 Y-0.169 E279.75882 ; perimeter | |
| G1 X4.130 Y-0.169 E280.24187 ; perimeter | |
| G1 X4.141 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.141 Y-10.738 E280.45813 F2113.187 ; perimeter | |
| G1 X9.819 Y-10.738 E280.58106 ; perimeter | |
| G1 X9.819 Y-0.748 E280.79732 ; perimeter | |
| G1 X18.763 Y-0.748 E280.99092 ; perimeter | |
| G1 X18.763 Y1.738 E281.04474 ; perimeter | |
| G1 X9.192 Y1.738 E281.25193 ; perimeter | |
| G1 X9.192 Y-3.252 E281.35995 ; perimeter | |
| G1 X4.768 Y-3.252 E281.45571 ; perimeter | |
| G1 X4.768 Y1.738 E281.56373 ; perimeter | |
| G1 X-18.763 Y1.738 E282.07312 ; perimeter | |
| G1 X-18.763 Y-0.748 E282.12694 ; perimeter | |
| G1 X4.081 Y-0.748 E282.62144 ; perimeter | |
| G1 X3.562 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.562 Y-11.316 E282.83770 F2113.187 ; perimeter | |
| G1 X10.398 Y-11.316 E282.98568 ; perimeter | |
| G1 X10.398 Y-1.326 E283.20194 ; perimeter | |
| G1 X19.341 Y-1.326 E283.39555 ; perimeter | |
| G1 X19.341 Y2.316 E283.47441 ; perimeter | |
| G1 X8.613 Y2.316 E283.70665 ; perimeter | |
| G1 X8.613 Y-2.674 E283.81467 ; perimeter | |
| G1 X5.347 Y-2.674 E283.88538 ; perimeter | |
| G1 X5.347 Y2.316 E283.99341 ; perimeter | |
| G1 X-19.341 Y2.316 E284.52785 ; perimeter | |
| G1 X-19.341 Y-1.326 E284.60671 ; perimeter | |
| G1 X3.502 Y-1.326 E285.10121 ; perimeter | |
| G1 X3.084 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.084 Y-11.795 E285.24271 F600.000 ; perimeter | |
| G1 X10.876 Y-11.795 E285.35309 ; perimeter | |
| G1 X10.876 Y-1.805 E285.49459 ; perimeter | |
| G1 X19.820 Y-1.805 E285.62127 ; perimeter | |
| G1 X19.820 Y2.795 E285.68642 ; perimeter | |
| G1 X8.135 Y2.795 E285.85193 ; perimeter | |
| G1 X8.135 Y-2.195 E285.92261 ; perimeter | |
| G1 X5.825 Y-2.195 E285.95532 ; perimeter | |
| G1 X5.825 Y2.795 E286.02600 ; perimeter | |
| G1 X-19.820 Y2.795 E286.38924 ; perimeter | |
| G1 X-19.820 Y-1.805 E286.45440 ; perimeter | |
| G1 X3.024 Y-1.805 E286.77796 ; perimeter | |
| G1 X3.484 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.717 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X5.717 Y-9.161 E286.87175 F3169.780 ; fill | |
| G1 X6.349 Y-9.161 E286.88542 ; fill | |
| G1 X6.349 Y-4.829 E286.97922 ; fill | |
| G1 X6.980 Y-4.829 E286.99288 ; fill | |
| G1 X6.980 Y-9.161 E287.08668 ; fill | |
| G1 X7.611 Y-9.161 E287.10035 ; fill | |
| G1 X7.611 Y-4.829 E287.19414 ; fill | |
| G1 X8.243 Y-4.829 E287.20781 ; fill | |
| G1 X8.243 Y-9.161 E287.30161 ; fill | |
| G1 X3.900 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E288.01809 F600.000 ; fill | |
| G1 F2100.000 E283.01809 ; retract | |
| G1 Z2.400 F7800.000 ; lift plate during travel | |
| G1 X10.060 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.200 F7800.000 ; restore layer Z | |
| G1 E288.01809 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E288.27566 F600.000 ; fill | |
| M73 P11 ; update progress | |
| G1 F2100.000 E283.27566 ; retract | |
| G1 Z2.500 F7800.000 ; move to next layer (20) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.300 F7800.000 ; restore layer Z | |
| G1 E288.27566 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E288.30443 F2083.102 ; perimeter | |
| G1 X10.144 Y1.159 E288.47849 ; perimeter | |
| G1 X10.144 Y-0.169 E288.50726 ; perimeter | |
| G1 X18.124 Y-0.169 E288.68002 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E288.73383 F2083.102 ; perimeter | |
| G1 X9.565 Y1.738 E288.93294 ; perimeter | |
| G1 X9.565 Y-0.748 E288.98676 ; perimeter | |
| G1 X18.703 Y-0.748 E289.18457 ; perimeter | |
| G1 F2100.000 E284.18457 ; retract | |
| G1 Z2.500 F7800.000 ; lift plate during travel | |
| G1 X8.720 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.300 F7800.000 ; restore layer Z | |
| G1 E289.18457 F2100.000 ; compensate retraction | |
| G1 X5.240 Y-4.409 E289.25990 F2083.102 ; perimeter | |
| G1 X5.240 Y-9.581 E289.37186 ; perimeter | |
| G1 X8.720 Y-9.581 E289.44719 ; perimeter | |
| G1 X8.720 Y-4.469 E289.55785 ; perimeter | |
| G1 X9.299 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.661 Y-3.831 E289.65823 F2083.102 ; perimeter | |
| G1 X4.661 Y-10.159 E289.79523 ; perimeter | |
| G1 X9.299 Y-10.159 E289.89562 ; perimeter | |
| G1 X9.299 Y-3.891 E290.03132 ; perimeter | |
| G1 X9.877 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X4.083 Y-3.252 E290.15675 F2083.102 ; perimeter | |
| G1 X4.083 Y-10.738 E290.31880 ; perimeter | |
| G1 X9.877 Y-10.738 E290.44423 ; perimeter | |
| G1 X9.877 Y-3.312 E290.60498 ; perimeter | |
| G1 F2100.000 E285.60498 ; retract | |
| G1 Z2.500 F7800.000 ; lift plate during travel | |
| G1 X3.816 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.300 F7800.000 ; restore layer Z | |
| G1 E290.60498 F2100.000 ; compensate retraction | |
| G1 X3.816 Y1.159 E290.63375 F2083.102 ; perimeter | |
| G1 X-18.184 Y1.159 E291.11001 ; perimeter | |
| G1 X-18.184 Y-0.169 E291.13878 ; perimeter | |
| G1 X3.756 Y-0.169 E291.61374 ; perimeter | |
| G1 X4.395 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.395 Y1.738 E291.66755 F2083.102 ; perimeter | |
| G1 X-18.763 Y1.738 E292.16887 ; perimeter | |
| G1 X-18.763 Y-0.748 E292.22268 ; perimeter | |
| G1 X4.335 Y-0.748 E292.72269 ; perimeter | |
| G1 X3.504 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.504 Y-11.316 E292.93895 F2083.102 ; perimeter | |
| G1 X10.456 Y-11.316 E293.08943 ; perimeter | |
| G1 X10.456 Y-1.326 E293.30569 ; perimeter | |
| G1 X19.341 Y-1.326 E293.49805 ; perimeter | |
| G1 X19.341 Y2.316 E293.57691 ; perimeter | |
| G1 X8.987 Y2.316 E293.80107 ; perimeter | |
| G1 X8.987 Y-2.674 E293.90909 ; perimeter | |
| G1 X4.973 Y-2.674 E293.99596 ; perimeter | |
| G1 X4.973 Y2.316 E294.10398 ; perimeter | |
| G1 X-19.341 Y2.316 E294.63034 ; perimeter | |
| G1 X-19.341 Y-1.326 E294.70920 ; perimeter | |
| G1 X3.444 Y-1.326 E295.20246 ; perimeter | |
| G1 X3.026 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.026 Y-11.795 E295.34396 F600.000 ; perimeter | |
| G1 X10.934 Y-11.795 E295.45597 ; perimeter | |
| G1 X10.934 Y-1.805 E295.59747 ; perimeter | |
| G1 X19.820 Y-1.805 E295.72333 ; perimeter | |
| G1 X19.820 Y2.795 E295.78849 ; perimeter | |
| G1 X8.508 Y2.795 E295.94871 ; perimeter | |
| G1 X8.508 Y-2.195 E296.01939 ; perimeter | |
| G1 X5.452 Y-2.195 E296.06268 ; perimeter | |
| G1 X5.452 Y2.795 E296.13335 ; perimeter | |
| G1 X-19.820 Y2.795 E296.49131 ; perimeter | |
| G1 X-19.820 Y-1.805 E296.55646 ; perimeter | |
| G1 X2.966 Y-1.805 E296.87920 ; perimeter | |
| G1 X3.426 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.659 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X8.301 Y-4.829 E296.93638 F3124.652 ; fill | |
| G1 X8.301 Y-5.448 E296.94978 ; fill | |
| G1 X5.659 Y-5.448 E297.00695 ; fill | |
| G1 X5.659 Y-6.067 E297.02035 ; fill | |
| G1 X8.301 Y-6.067 E297.07753 ; fill | |
| G1 X8.301 Y-6.686 E297.09093 ; fill | |
| G1 X5.659 Y-6.686 E297.14810 ; fill | |
| G1 X5.659 Y-7.304 E297.16150 ; fill | |
| G1 X8.301 Y-7.304 E297.21868 ; fill | |
| G1 X8.301 Y-7.923 E297.23207 ; fill | |
| G1 X5.659 Y-7.923 E297.28925 ; fill | |
| G1 X5.659 Y-8.542 E297.30265 ; fill | |
| G1 X8.301 Y-8.542 E297.35982 ; fill | |
| G1 X8.301 Y-9.161 E297.37322 ; fill | |
| G1 X5.659 Y-9.161 E297.43040 ; fill | |
| G1 X3.527 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E298.13461 F600.000 ; fill | |
| G1 F2100.000 E293.13461 ; retract | |
| G1 Z2.500 F7800.000 ; lift plate during travel | |
| G1 X10.433 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.300 F7800.000 ; restore layer Z | |
| G1 E298.13461 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E298.37992 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P11 ; update progress | |
| G1 F2100.000 E293.37992 ; retract | |
| G1 Z2.600 F7800.000 ; move to next layer (21) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.400 F7800.000 ; restore layer Z | |
| G1 E298.37992 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E298.40868 F4800.000 ; perimeter | |
| G1 X10.408 Y1.159 E298.57701 ; perimeter | |
| G1 X10.408 Y-0.169 E298.60578 ; perimeter | |
| G1 X18.124 Y-0.169 E298.77281 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E298.82663 F4800.000 ; perimeter | |
| G1 X9.830 Y1.738 E299.02001 ; perimeter | |
| G1 X9.830 Y-0.748 E299.07382 ; perimeter | |
| G1 X18.703 Y-0.748 E299.26591 ; perimeter | |
| G1 F2100.000 E294.26591 ; retract | |
| G1 Z2.600 F7800.000 ; lift plate during travel | |
| G1 X8.778 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.400 F7800.000 ; restore layer Z | |
| G1 E299.26591 F2100.000 ; compensate retraction | |
| G1 X5.182 Y-4.409 E299.34374 F4800.000 ; perimeter | |
| G1 X5.182 Y-9.581 E299.45569 ; perimeter | |
| G1 X8.778 Y-9.581 E299.53353 ; perimeter | |
| G1 X8.778 Y-4.469 E299.64418 ; perimeter | |
| G1 X9.356 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.604 Y-3.831 E299.74707 F4800.000 ; perimeter | |
| G1 X4.604 Y-10.159 E299.88407 ; perimeter | |
| G1 X9.356 Y-10.159 E299.98695 ; perimeter | |
| G1 X9.356 Y-3.891 E300.12265 ; perimeter | |
| G1 X9.935 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X4.025 Y-3.252 E300.25058 F4800.000 ; perimeter | |
| G1 X4.025 Y-10.738 E300.41263 ; perimeter | |
| G1 X9.935 Y-10.738 E300.54056 ; perimeter | |
| G1 X9.935 Y-3.312 E300.70131 ; perimeter | |
| G1 F2100.000 E295.70131 ; retract | |
| G1 Z2.600 F7800.000 ; lift plate during travel | |
| G1 X3.552 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.400 F7800.000 ; restore layer Z | |
| G1 E300.70131 F2100.000 ; compensate retraction | |
| G1 X3.552 Y1.159 E300.73008 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E301.20061 ; perimeter | |
| G1 X-18.184 Y-0.169 E301.22938 ; perimeter | |
| G1 X3.492 Y-0.169 E301.69861 ; perimeter | |
| G1 X4.130 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.130 Y1.738 E301.75243 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E302.24801 ; perimeter | |
| G1 X-18.763 Y-0.748 E302.30182 ; perimeter | |
| G1 X4.070 Y-0.748 E302.79611 ; perimeter | |
| G1 X3.447 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.447 Y-11.316 E303.01237 F4800.000 ; perimeter | |
| G1 X10.513 Y-11.316 E303.16534 ; perimeter | |
| G1 X10.513 Y-1.326 E303.38160 ; perimeter | |
| G1 X19.341 Y-1.326 E303.57271 ; perimeter | |
| G1 X19.341 Y2.316 E303.65157 ; perimeter | |
| G1 X9.251 Y2.316 E303.87000 ; perimeter | |
| G1 X9.251 Y-2.674 E303.97802 ; perimeter | |
| G1 X4.709 Y-2.674 E304.07635 ; perimeter | |
| G1 X4.709 Y2.316 E304.18438 ; perimeter | |
| G1 X-19.341 Y2.316 E304.70501 ; perimeter | |
| G1 X-19.341 Y-1.326 E304.78387 ; perimeter | |
| G1 X3.387 Y-1.326 E305.27588 ; perimeter | |
| G1 X2.968 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.968 Y-11.795 E305.41738 F1200.000 ; perimeter | |
| G1 X10.992 Y-11.795 E305.53103 ; perimeter | |
| G1 X10.992 Y-1.805 E305.67252 ; perimeter | |
| G1 X19.820 Y-1.805 E305.79757 ; perimeter | |
| G1 X19.820 Y2.795 E305.86272 ; perimeter | |
| G1 X8.773 Y2.795 E306.01920 ; perimeter | |
| G1 X8.773 Y-2.195 E306.08988 ; perimeter | |
| G1 X5.187 Y-2.195 E306.14066 ; perimeter | |
| G1 X5.187 Y2.795 E306.21134 ; perimeter | |
| G1 X-19.820 Y2.795 E306.56554 ; perimeter | |
| G1 X-19.820 Y-1.805 E306.63070 ; perimeter | |
| G1 X2.908 Y-1.805 E306.95262 ; perimeter | |
| G1 X3.368 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.602 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X5.602 Y-9.161 E307.04642 F7200.000 ; fill | |
| G1 X6.291 Y-9.161 E307.06133 ; fill | |
| G1 X6.291 Y-4.829 E307.15513 ; fill | |
| G1 X6.980 Y-4.829 E307.17005 ; fill | |
| G1 X6.980 Y-9.161 E307.26384 ; fill | |
| G1 X7.669 Y-9.161 E307.27876 ; fill | |
| G1 X7.669 Y-4.829 E307.37256 ; fill | |
| G1 X8.358 Y-4.829 E307.38748 ; fill | |
| G1 X8.358 Y-9.161 E307.48127 ; fill | |
| G1 X9.882 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X9.882 Y-1.037 E307.54457 F600.000 ; fill | |
| G1 F2100.000 E302.54457 ; retract | |
| G1 Z2.600 F7800.000 ; lift plate during travel | |
| G1 X4.078 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.400 F7800.000 ; restore layer Z | |
| G1 E307.54457 F2100.000 ; compensate retraction | |
| G1 X4.078 Y-2.963 E307.60787 F600.000 ; fill | |
| G1 X3.262 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E308.30338 F600.000 ; fill | |
| G1 F2100.000 E303.30338 ; retract | |
| G1 Z2.600 F7800.000 ; lift plate during travel | |
| G1 X10.698 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.400 F7800.000 ; restore layer Z | |
| G1 E308.30338 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E308.53999 F600.000 ; fill | |
| M73 P12 ; update progress | |
| G1 F2100.000 E303.53999 ; retract | |
| G1 Z2.700 F7800.000 ; move to next layer (8) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E308.53999 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E308.54060 F600.000 ; support material | |
| G1 X18.859 Y3.974 E308.55962 ; support material | |
| G1 X18.859 Y4.016 E308.56023 ; support material | |
| G1 X20.201 Y4.016 E308.57925 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E308.59058 F600.000 ; support material | |
| G1 X18.480 Y3.595 E308.62032 ; support material | |
| G1 X18.480 Y4.395 E308.63165 ; support material | |
| G1 X20.580 Y4.395 E308.66140 ; support material | |
| G1 F2100.000 E303.66140 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E308.66140 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E308.67161 F600.000 ; support material | |
| G1 X20.013 Y10.899 E308.70203 ; support material | |
| G1 X17.705 Y10.831 E308.73474 ; support material | |
| G1 X16.294 Y13.116 E308.77278 ; support material | |
| G1 X21.141 Y13.116 E308.84145 ; support material | |
| G1 X21.141 Y12.595 E308.84884 ; support material | |
| G1 X20.335 Y11.098 E308.87292 ; support material | |
| G1 X21.141 Y9.792 E308.89466 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E308.93957 F600.000 ; support material | |
| G1 X12.099 Y10.855 E308.97172 ; support material | |
| G1 X13.195 Y12.888 E309.00443 ; support material | |
| G1 X13.054 Y13.116 E309.00823 ; support material | |
| G1 X13.498 Y13.116 E309.01453 ; support material | |
| G1 X13.517 Y13.087 E309.01502 ; support material | |
| G1 X14.519 Y13.116 E309.02923 ; support material | |
| G1 X15.849 Y13.116 E309.04806 ; support material | |
| G1 X17.383 Y10.632 E309.08942 ; support material | |
| G1 X16.462 Y8.924 E309.11690 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E309.18049 F600.000 ; support material | |
| G1 X9.147 Y10.389 E309.20407 ; support material | |
| G1 X7.589 Y12.912 E309.24607 ; support material | |
| G1 X5.281 Y12.844 E309.27878 ; support material | |
| G1 X5.112 Y13.116 E309.28332 ; support material | |
| G1 X7.914 Y13.116 E309.32300 ; support material | |
| G1 X9.469 Y10.588 E309.36504 ; support material | |
| G1 X11.777 Y10.656 E309.39775 ; support material | |
| G1 X12.847 Y8.924 E309.42659 ; support material | |
| G1 F2100.000 E304.42659 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E309.42659 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E309.43792 F600.000 ; support material | |
| G1 X9.236 Y3.595 E309.45695 ; support material | |
| G1 X8.851 Y4.395 E309.46953 ; support material | |
| G1 X10.580 Y4.395 E309.49402 ; support material | |
| G1 F2100.000 E304.49402 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E309.49402 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E309.50032 F600.000 ; support material | |
| G1 X3.541 Y10.413 E309.52511 ; support material | |
| G1 X1.233 Y10.345 E309.55782 ; support material | |
| G1 X-0.325 Y12.868 E309.59982 ; support material | |
| G1 X-0.191 Y13.116 E309.60382 ; support material | |
| G1 X4.668 Y13.116 E309.67263 ; support material | |
| G1 X4.959 Y12.645 E309.68048 ; support material | |
| G1 X3.863 Y10.612 E309.71319 ; support material | |
| G1 X4.906 Y8.924 E309.74129 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E309.75314 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E309.86474 ; support material | |
| G1 X-5.270 Y8.545 E309.87541 ; support material | |
| G1 X-21.520 Y8.545 E310.10558 ; support material | |
| G1 X-21.520 Y13.495 E310.17569 ; support material | |
| G1 X21.520 Y13.495 E310.78531 ; support material | |
| G1 X21.520 Y8.545 E310.85542 ; support material | |
| G1 X2.246 Y8.545 E311.12842 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E311.16021 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E311.20074 ; support material | |
| G1 X-4.372 Y10.369 E311.23734 ; support material | |
| G1 X-3.277 Y12.402 E311.27005 ; support material | |
| G1 X-3.718 Y13.116 E311.28194 ; support material | |
| G1 X-3.273 Y13.116 E311.28824 ; support material | |
| G1 X-2.955 Y12.601 E311.29682 ; support material | |
| G1 X-0.647 Y12.669 E311.32953 ; support material | |
| G1 X0.911 Y10.146 E311.37153 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E311.40482 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E311.42510 ; support material | |
| G1 X-4.891 Y8.924 E311.43577 ; support material | |
| G1 X-7.853 Y8.924 E311.47771 ; support material | |
| G1 X-7.325 Y9.903 E311.49347 ; support material | |
| G1 X-8.883 Y12.426 E311.53547 ; support material | |
| G1 X-11.191 Y12.358 E311.56818 ; support material | |
| G1 X-11.659 Y13.116 E311.58080 ; support material | |
| G1 X-8.296 Y13.116 E311.62845 ; support material | |
| G1 X-8.561 Y12.625 E311.63636 ; support material | |
| G1 X-7.003 Y10.102 E311.67835 ; support material | |
| G1 X-4.695 Y10.170 E311.71106 ; support material | |
| G1 F2100.000 E306.71106 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E311.71106 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E311.72239 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E311.75214 ; support material | |
| G1 X-11.520 Y4.395 E311.76347 ; support material | |
| G1 X-9.420 Y4.395 E311.79321 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E311.79382 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E311.81284 ; support material | |
| G1 X-11.141 Y4.016 E311.81345 ; support material | |
| G1 X-9.799 Y4.016 E311.83247 ; support material | |
| G1 F2100.000 E306.83247 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E311.83247 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E311.85249 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E311.85879 ; support material | |
| G1 X-12.930 Y9.927 E311.87549 ; support material | |
| G1 X-15.239 Y9.859 E311.90820 ; support material | |
| G1 X-16.796 Y12.382 E311.95020 ; support material | |
| G1 X-16.401 Y13.116 E311.96202 ; support material | |
| G1 X-12.104 Y13.116 E312.02287 ; support material | |
| G1 X-11.513 Y12.159 E312.03881 ; support material | |
| G1 X-12.608 Y10.126 E312.07152 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E312.08337 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E312.14420 ; support material | |
| G1 X-20.844 Y9.883 E312.16017 ; support material | |
| G1 X-19.749 Y11.916 E312.19288 ; support material | |
| G1 X-20.490 Y13.116 E312.21286 ; support material | |
| G1 X-20.045 Y13.116 E312.21916 ; support material | |
| G1 X-19.427 Y12.115 E312.23583 ; support material | |
| G1 X-17.119 Y12.183 E312.26854 ; support material | |
| G1 X-15.561 Y9.660 E312.31054 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E312.32252 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E312.32882 ; support material | |
| G1 X-21.141 Y9.644 E312.33902 ; support material | |
| G1 F2100.000 E307.33902 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E312.33902 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E312.34532 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E312.34604 ; support material | |
| G1 X-20.018 Y4.016 E312.35234 ; support material | |
| G1 X-19.991 Y3.974 E312.35305 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E312.37147 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E312.38421 ; support material | |
| G1 X-21.520 Y4.395 E312.41396 ; support material | |
| G1 X-19.420 Y4.395 E312.44370 ; support material | |
| G1 X-19.420 Y3.595 E312.45504 ; support material | |
| G1 X-20.620 Y3.595 E312.47203 ; support material | |
| M126 ; enable fan | |
| M73 P12 ; update progress | |
| G1 F2100.000 E307.47203 ; retract | |
| G1 Z2.700 F7800.000 ; move to next layer (22) and lift | |
| G1 X10.508 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E312.47203 F2100.000 ; compensate retraction | |
| G1 X10.508 Y-0.169 E312.50080 F2132.451 ; perimeter | |
| G1 X18.184 Y-0.169 E312.66697 ; perimeter | |
| G1 X18.184 Y1.159 E312.69573 ; perimeter | |
| G1 X10.568 Y1.159 E312.86060 ; perimeter | |
| G1 X9.930 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X9.930 Y-0.748 E312.91441 F2132.451 ; perimeter | |
| G1 X18.763 Y-0.748 E313.10563 ; perimeter | |
| G1 X18.763 Y1.738 E313.15945 ; perimeter | |
| G1 X9.990 Y1.738 E313.34936 ; perimeter | |
| G1 X8.835 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 X5.125 Y-4.409 E313.42970 F2132.451 ; perimeter | |
| G1 X5.125 Y-9.581 E313.54165 ; perimeter | |
| G1 X8.835 Y-9.581 E313.62198 ; perimeter | |
| G1 X8.835 Y-4.469 E313.73264 ; perimeter | |
| G1 X9.414 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.546 Y-3.831 E313.83802 F2132.451 ; perimeter | |
| G1 X4.546 Y-10.159 E313.97502 ; perimeter | |
| G1 X9.414 Y-10.159 E314.08040 ; perimeter | |
| G1 X9.414 Y-3.891 E314.21611 ; perimeter | |
| G1 X9.993 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.967 Y-3.252 E314.34654 F2132.451 ; perimeter | |
| G1 X3.967 Y-10.738 E314.50859 ; perimeter | |
| G1 X9.993 Y-10.738 E314.63902 ; perimeter | |
| G1 X9.993 Y-3.312 E314.79977 ; perimeter | |
| G1 F2100.000 E309.79977 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X3.452 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E314.79977 F2100.000 ; compensate retraction | |
| G1 X3.452 Y1.159 E314.82853 F2132.451 ; perimeter | |
| G1 X-18.184 Y1.159 E315.29690 ; perimeter | |
| G1 X-18.184 Y-0.169 E315.32567 ; perimeter | |
| G1 X3.392 Y-0.169 E315.79274 ; perimeter | |
| G1 X4.030 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.030 Y1.738 E315.84655 F2132.451 ; perimeter | |
| G1 X-18.763 Y1.738 E316.33997 ; perimeter | |
| G1 X-18.763 Y-0.748 E316.39378 ; perimeter | |
| G1 X3.970 Y-0.748 E316.88590 ; perimeter | |
| G1 X3.389 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.389 Y-11.316 E317.10216 F2132.451 ; perimeter | |
| G1 X10.571 Y-11.316 E317.25764 ; perimeter | |
| G1 X10.571 Y-1.326 E317.47390 ; perimeter | |
| G1 X19.341 Y-1.326 E317.66376 ; perimeter | |
| G1 X19.341 Y2.316 E317.74262 ; perimeter | |
| G1 X9.351 Y2.316 E317.95888 ; perimeter | |
| G1 X9.351 Y-2.674 E318.06690 ; perimeter | |
| G1 X4.609 Y-2.674 E318.16956 ; perimeter | |
| G1 X4.609 Y2.316 E318.27759 ; perimeter | |
| G1 X-19.341 Y2.316 E318.79605 ; perimeter | |
| G1 X-19.341 Y-1.326 E318.87491 ; perimeter | |
| G1 X3.329 Y-1.326 E319.36567 ; perimeter | |
| G1 X2.910 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.910 Y-11.795 E319.50717 F600.000 ; perimeter | |
| G1 X11.050 Y-11.795 E319.62246 ; perimeter | |
| G1 X11.050 Y-1.805 E319.76396 ; perimeter | |
| G1 X19.820 Y-1.805 E319.88818 ; perimeter | |
| G1 X19.820 Y2.795 E319.95333 ; perimeter | |
| G1 X8.873 Y2.795 E320.10839 ; perimeter | |
| G1 X8.873 Y-2.195 E320.17907 ; perimeter | |
| G1 X5.087 Y-2.195 E320.23269 ; perimeter | |
| G1 X5.087 Y2.795 E320.30337 ; perimeter | |
| G1 X-19.820 Y2.795 E320.65616 ; perimeter | |
| G1 X-19.820 Y-1.805 E320.72131 ; perimeter | |
| G1 X2.850 Y-1.805 E321.04241 ; perimeter | |
| G1 X3.310 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.544 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X8.416 Y-4.829 E321.10459 F3198.677 ; fill | |
| G1 X8.416 Y-5.448 E321.11799 ; fill | |
| G1 X5.544 Y-5.448 E321.18016 ; fill | |
| G1 X5.544 Y-6.067 E321.19356 ; fill | |
| G1 X8.416 Y-6.067 E321.25574 ; fill | |
| G1 X8.416 Y-6.686 E321.26914 ; fill | |
| G1 X5.544 Y-6.686 E321.33131 ; fill | |
| G1 X5.544 Y-7.304 E321.34471 ; fill | |
| G1 X8.416 Y-7.304 E321.40688 ; fill | |
| G1 X8.416 Y-7.923 E321.42028 ; fill | |
| G1 X5.544 Y-7.923 E321.48246 ; fill | |
| G1 X5.544 Y-8.542 E321.49586 ; fill | |
| G1 X8.416 Y-8.542 E321.55803 ; fill | |
| G1 X8.416 Y-9.161 E321.57143 ; fill | |
| G1 X5.544 Y-9.161 E321.63360 ; fill | |
| G1 X3.999 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.999 Y-1.037 E321.69690 F600.000 ; fill | |
| G1 X3.162 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E322.38913 F600.000 ; fill | |
| G1 F2100.000 E317.38913 ; retract | |
| G1 Z2.700 F7800.000 ; lift plate during travel | |
| G1 X9.961 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.500 F7800.000 ; restore layer Z | |
| G1 E322.38913 F2100.000 ; compensate retraction | |
| G1 X9.961 Y-2.963 E322.45243 F600.000 ; fill | |
| G1 X10.798 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E322.68575 F600.000 ; fill | |
| M73 P12 ; update progress | |
| G1 F2100.000 E317.68575 ; retract | |
| G1 Z2.800 F7800.000 ; move to next layer (23) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.600 F7800.000 ; restore layer Z | |
| G1 E322.68575 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E322.71451 F2131.270 ; perimeter | |
| G1 X10.608 Y1.159 E322.87852 ; perimeter | |
| G1 X10.608 Y-0.169 E322.90728 ; perimeter | |
| G1 X18.124 Y-0.169 E323.06999 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E323.12380 F2131.270 ; perimeter | |
| G1 X10.030 Y1.738 E323.31285 ; perimeter | |
| G1 X10.030 Y-0.748 E323.36666 ; perimeter | |
| G1 X18.703 Y-0.748 E323.55442 ; perimeter | |
| G1 F2100.000 E318.55442 ; retract | |
| G1 Z2.800 F7800.000 ; lift plate during travel | |
| G1 X8.893 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.600 F7800.000 ; restore layer Z | |
| G1 E323.55442 F2100.000 ; compensate retraction | |
| G1 X5.067 Y-4.409 E323.63725 F2131.270 ; perimeter | |
| G1 X5.067 Y-9.581 E323.74921 ; perimeter | |
| G1 X8.893 Y-9.581 E323.83204 ; perimeter | |
| G1 X8.893 Y-4.469 E323.94269 ; perimeter | |
| G1 X9.472 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.488 Y-3.831 E324.05057 F2131.270 ; perimeter | |
| G1 X4.488 Y-10.159 E324.18758 ; perimeter | |
| G1 X9.472 Y-10.159 E324.29546 ; perimeter | |
| G1 X9.472 Y-3.891 E324.43116 ; perimeter | |
| G1 X10.050 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.910 Y-3.252 E324.56409 F2131.270 ; perimeter | |
| G1 X3.910 Y-10.738 E324.72614 ; perimeter | |
| G1 X10.050 Y-10.738 E324.85907 ; perimeter | |
| G1 X10.050 Y-3.312 E325.01982 ; perimeter | |
| G1 F2100.000 E320.01982 ; retract | |
| G1 Z2.800 F7800.000 ; lift plate during travel | |
| G1 X3.352 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.600 F7800.000 ; restore layer Z | |
| G1 E325.01982 F2100.000 ; compensate retraction | |
| G1 X3.352 Y1.159 E325.04858 F2131.270 ; perimeter | |
| G1 X-18.184 Y1.159 E325.51479 ; perimeter | |
| G1 X-18.184 Y-0.169 E325.54355 ; perimeter | |
| G1 X3.292 Y-0.169 E326.00846 ; perimeter | |
| G1 X3.930 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.930 Y1.738 E326.06227 F2131.270 ; perimeter | |
| G1 X-18.763 Y1.738 E326.55353 ; perimeter | |
| G1 X-18.763 Y-0.748 E326.60734 ; perimeter | |
| G1 X3.870 Y-0.748 E327.09729 ; perimeter | |
| G1 X3.331 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.331 Y-11.316 E327.31355 F2131.270 ; perimeter | |
| G1 X10.629 Y-11.316 E327.47153 ; perimeter | |
| G1 X10.629 Y-1.326 E327.68779 ; perimeter | |
| G1 X19.341 Y-1.326 E327.87640 ; perimeter | |
| G1 X19.341 Y2.316 E327.95526 ; perimeter | |
| G1 X9.451 Y2.316 E328.16936 ; perimeter | |
| G1 X9.451 Y-2.674 E328.27738 ; perimeter | |
| G1 X4.509 Y-2.674 E328.38437 ; perimeter | |
| G1 X4.509 Y2.316 E328.49239 ; perimeter | |
| G1 X-19.341 Y2.316 E329.00869 ; perimeter | |
| G1 X-19.341 Y-1.326 E329.08755 ; perimeter | |
| G1 X3.271 Y-1.326 E329.57706 ; perimeter | |
| G1 X2.853 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.853 Y-11.795 E329.71856 F600.000 ; perimeter | |
| G1 X11.107 Y-11.795 E329.83548 ; perimeter | |
| G1 X11.107 Y-1.805 E329.97698 ; perimeter | |
| G1 X19.820 Y-1.805 E330.10039 ; perimeter | |
| G1 X19.820 Y2.795 E330.16554 ; perimeter | |
| G1 X8.973 Y2.795 E330.31919 ; perimeter | |
| G1 X8.973 Y-2.195 E330.38987 ; perimeter | |
| G1 X4.987 Y-2.195 E330.44631 ; perimeter | |
| G1 X4.987 Y2.795 E330.51699 ; perimeter | |
| G1 X-19.820 Y2.795 E330.86837 ; perimeter | |
| G1 X-19.820 Y-1.805 E330.93352 ; perimeter | |
| G1 X2.793 Y-1.805 E331.25381 ; perimeter | |
| G1 X3.253 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.486 Y-9.161 F7800.000 ; move to first fill point | |
| G1 X5.486 Y-4.829 E331.34760 F3196.906 ; fill | |
| G1 X6.084 Y-4.829 E331.36054 ; fill | |
| G1 X6.084 Y-9.161 E331.45433 ; fill | |
| G1 X6.681 Y-9.161 E331.46727 ; fill | |
| G1 X6.681 Y-4.829 E331.56106 ; fill | |
| G1 X7.279 Y-4.829 E331.57400 ; fill | |
| G1 X7.279 Y-9.161 E331.66779 ; fill | |
| G1 X7.876 Y-9.161 E331.68073 ; fill | |
| G1 X7.876 Y-4.829 E331.77452 ; fill | |
| G1 X8.474 Y-4.829 E331.78746 ; fill | |
| G1 X8.474 Y-9.161 E331.88125 ; fill | |
| G1 X10.040 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.040 Y-1.037 E331.90132 F600.000 ; fill | |
| G1 F2100.000 E326.90132 ; retract | |
| G1 Z2.800 F7800.000 ; lift plate during travel | |
| G1 X3.920 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.600 F7800.000 ; restore layer Z | |
| G1 E331.90132 F2100.000 ; compensate retraction | |
| G1 X3.920 Y-2.963 E331.92139 F600.000 ; fill | |
| G1 X3.062 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E332.61033 F600.000 ; fill | |
| G1 F2100.000 E327.61033 ; retract | |
| G1 Z2.800 F7800.000 ; lift plate during travel | |
| G1 X10.898 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.600 F7800.000 ; restore layer Z | |
| G1 E332.61033 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E332.84036 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P13 ; update progress | |
| G1 F2100.000 E327.84036 ; retract | |
| G1 Z2.900 F7800.000 ; move to next layer (24) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.700 F7800.000 ; restore layer Z | |
| G1 E332.84036 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E332.86913 F4800.000 ; perimeter | |
| G1 X10.708 Y1.159 E333.03097 ; perimeter | |
| G1 X10.708 Y-0.169 E333.05973 ; perimeter | |
| G1 X18.124 Y-0.169 E333.22027 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E333.27408 F4800.000 ; perimeter | |
| G1 X10.130 Y1.738 E333.46097 ; perimeter | |
| G1 X10.130 Y-0.748 E333.51479 ; perimeter | |
| G1 X18.703 Y-0.748 E333.70038 ; perimeter | |
| G1 F2100.000 E328.70038 ; retract | |
| G1 Z2.900 F7800.000 ; lift plate during travel | |
| G1 X8.951 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.700 F7800.000 ; restore layer Z | |
| G1 E333.70038 F2100.000 ; compensate retraction | |
| G1 X5.009 Y-4.409 E333.78571 F4800.000 ; perimeter | |
| G1 X5.009 Y-9.581 E333.89766 ; perimeter | |
| G1 X8.951 Y-9.581 E333.98299 ; perimeter | |
| G1 X8.951 Y-4.469 E334.09365 ; perimeter | |
| G1 X9.529 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.431 Y-3.831 E334.20403 F4800.000 ; perimeter | |
| G1 X4.431 Y-10.159 E334.34103 ; perimeter | |
| G1 X9.529 Y-10.159 E334.45141 ; perimeter | |
| G1 X9.529 Y-3.891 E334.58711 ; perimeter | |
| G1 X10.108 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.852 Y-3.252 E334.72254 F4800.000 ; perimeter | |
| G1 X3.852 Y-10.738 E334.88459 ; perimeter | |
| G1 X10.108 Y-10.738 E335.02002 ; perimeter | |
| G1 X10.108 Y-3.312 E335.18077 ; perimeter | |
| G1 F2100.000 E330.18077 ; retract | |
| G1 Z2.900 F7800.000 ; lift plate during travel | |
| G1 X3.252 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.700 F7800.000 ; restore layer Z | |
| G1 E335.18077 F2100.000 ; compensate retraction | |
| G1 X3.252 Y1.159 E335.20954 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E335.67358 ; perimeter | |
| G1 X-18.184 Y-0.169 E335.70234 ; perimeter | |
| G1 X3.192 Y-0.169 E336.16508 ; perimeter | |
| G1 X3.830 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.830 Y1.738 E336.21890 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E336.70799 ; perimeter | |
| G1 X-18.763 Y-0.748 E336.76180 ; perimeter | |
| G1 X3.770 Y-0.748 E337.24959 ; perimeter | |
| G1 X3.273 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.273 Y-11.316 E337.46585 F4800.000 ; perimeter | |
| G1 X10.687 Y-11.316 E337.62632 ; perimeter | |
| G1 X10.687 Y-1.326 E337.84258 ; perimeter | |
| G1 X19.341 Y-1.326 E338.02994 ; perimeter | |
| G1 X19.341 Y2.316 E338.10880 ; perimeter | |
| G1 X9.551 Y2.316 E338.32074 ; perimeter | |
| G1 X9.551 Y-2.674 E338.42876 ; perimeter | |
| G1 X4.409 Y-2.674 E338.54008 ; perimeter | |
| G1 X4.409 Y2.316 E338.64810 ; perimeter | |
| G1 X-19.341 Y2.316 E339.16224 ; perimeter | |
| G1 X-19.341 Y-1.326 E339.24110 ; perimeter | |
| G1 X3.213 Y-1.326 E339.72936 ; perimeter | |
| G1 X2.795 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.795 Y-11.795 E339.87086 F1200.000 ; perimeter | |
| G1 X11.165 Y-11.795 E339.98941 ; perimeter | |
| G1 X11.165 Y-1.805 E340.13091 ; perimeter | |
| G1 X19.820 Y-1.805 E340.25350 ; perimeter | |
| G1 X19.820 Y2.795 E340.31866 ; perimeter | |
| G1 X9.073 Y2.795 E340.47088 ; perimeter | |
| G1 X9.073 Y-2.195 E340.54156 ; perimeter | |
| G1 X4.887 Y-2.195 E340.60084 ; perimeter | |
| G1 X4.887 Y2.795 E340.67152 ; perimeter | |
| G1 X-19.820 Y2.795 E341.02148 ; perimeter | |
| G1 X-19.820 Y-1.805 E341.08663 ; perimeter | |
| G1 X2.735 Y-1.805 E341.40610 ; perimeter | |
| G1 X3.195 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.428 Y-4.829 F7800.000 ; move to first fill point | |
| G1 X8.532 Y-4.829 E341.47327 F7200.000 ; fill | |
| G1 X8.532 Y-5.448 E341.48667 ; fill | |
| G1 X5.428 Y-5.448 E341.55385 ; fill | |
| G1 X5.428 Y-6.067 E341.56725 ; fill | |
| G1 X8.532 Y-6.067 E341.63442 ; fill | |
| G1 X8.532 Y-6.686 E341.64782 ; fill | |
| G1 X5.428 Y-6.686 E341.71499 ; fill | |
| G1 X5.428 Y-7.304 E341.72839 ; fill | |
| G1 X8.532 Y-7.304 E341.79556 ; fill | |
| G1 X8.532 Y-7.923 E341.80896 ; fill | |
| G1 X5.428 Y-7.923 E341.87614 ; fill | |
| G1 X5.428 Y-8.542 E341.88953 ; fill | |
| G1 X8.532 Y-8.542 E341.95671 ; fill | |
| G1 X8.532 Y-9.161 E341.97011 ; fill | |
| G1 X5.428 Y-9.161 E342.03728 ; fill | |
| G1 X3.841 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.841 Y-1.037 E342.05735 F600.000 ; fill | |
| G1 X2.962 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E342.74300 F600.000 ; fill | |
| G1 F2100.000 E337.74300 ; retract | |
| G1 Z2.900 F7800.000 ; lift plate during travel | |
| G1 X10.119 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.700 F7800.000 ; restore layer Z | |
| G1 E342.74300 F2100.000 ; compensate retraction | |
| G1 X10.119 Y-2.963 E342.76307 F600.000 ; fill | |
| G1 X10.998 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E342.98981 F600.000 ; fill | |
| M73 P13 ; update progress | |
| G1 F2100.000 E337.98981 ; retract | |
| G1 Z3.000 F7800.000 ; move to next layer (9) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E342.98981 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E342.99042 F600.000 ; support material | |
| G1 X18.859 Y3.974 E343.00944 ; support material | |
| G1 X18.859 Y4.016 E343.01005 ; support material | |
| G1 X20.201 Y4.016 E343.02907 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E343.04040 F600.000 ; support material | |
| G1 X18.480 Y3.595 E343.07015 ; support material | |
| G1 X18.480 Y4.395 E343.08148 ; support material | |
| G1 X20.580 Y4.395 E343.11122 ; support material | |
| G1 F2100.000 E338.11122 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E343.11122 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E343.12143 F600.000 ; support material | |
| G1 X20.013 Y10.899 E343.15185 ; support material | |
| G1 X17.705 Y10.831 E343.18456 ; support material | |
| G1 X16.294 Y13.116 E343.22261 ; support material | |
| G1 X21.141 Y13.116 E343.29127 ; support material | |
| G1 X21.141 Y12.595 E343.29866 ; support material | |
| G1 X20.335 Y11.098 E343.32274 ; support material | |
| G1 X21.141 Y9.792 E343.34448 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E343.38939 F600.000 ; support material | |
| G1 X12.099 Y10.855 E343.42154 ; support material | |
| G1 X13.195 Y12.888 E343.45425 ; support material | |
| G1 X13.054 Y13.116 E343.45805 ; support material | |
| G1 X13.498 Y13.116 E343.46435 ; support material | |
| G1 X13.517 Y13.087 E343.46485 ; support material | |
| G1 X14.519 Y13.116 E343.47905 ; support material | |
| G1 X15.849 Y13.116 E343.49789 ; support material | |
| G1 X17.383 Y10.632 E343.53924 ; support material | |
| G1 X16.462 Y8.924 E343.56673 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E343.63032 F600.000 ; support material | |
| G1 X9.147 Y10.389 E343.65389 ; support material | |
| G1 X7.589 Y12.912 E343.69589 ; support material | |
| G1 X5.281 Y12.844 E343.72860 ; support material | |
| G1 X5.112 Y13.116 E343.73314 ; support material | |
| G1 X7.914 Y13.116 E343.77282 ; support material | |
| G1 X9.469 Y10.588 E343.81487 ; support material | |
| G1 X11.777 Y10.656 E343.84758 ; support material | |
| G1 X12.847 Y8.924 E343.87641 ; support material | |
| G1 F2100.000 E338.87641 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E343.87641 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E343.88775 F600.000 ; support material | |
| G1 X9.236 Y3.595 E343.90678 ; support material | |
| G1 X8.851 Y4.395 E343.91935 ; support material | |
| G1 X10.580 Y4.395 E343.94384 ; support material | |
| G1 F2100.000 E338.94384 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E343.94384 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E343.95014 F600.000 ; support material | |
| G1 X3.541 Y10.413 E343.97493 ; support material | |
| G1 X1.233 Y10.345 E344.00764 ; support material | |
| G1 X-0.325 Y12.868 E344.04964 ; support material | |
| G1 X-0.191 Y13.116 E344.05364 ; support material | |
| G1 X4.668 Y13.116 E344.12246 ; support material | |
| G1 X4.959 Y12.645 E344.13030 ; support material | |
| G1 X3.863 Y10.612 E344.16301 ; support material | |
| G1 X4.906 Y8.924 E344.19112 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E344.20296 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E344.31456 ; support material | |
| G1 X-5.270 Y8.545 E344.32523 ; support material | |
| G1 X-21.520 Y8.545 E344.55540 ; support material | |
| G1 X-21.520 Y13.495 E344.62551 ; support material | |
| G1 X21.520 Y13.495 E345.23513 ; support material | |
| G1 X21.520 Y8.545 E345.30524 ; support material | |
| G1 X2.246 Y8.545 E345.57824 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E345.61003 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E345.65056 ; support material | |
| G1 X-4.372 Y10.369 E345.68716 ; support material | |
| G1 X-3.277 Y12.402 E345.71987 ; support material | |
| G1 X-3.718 Y13.116 E345.73176 ; support material | |
| G1 X-3.273 Y13.116 E345.73806 ; support material | |
| G1 X-2.955 Y12.601 E345.74665 ; support material | |
| G1 X-0.647 Y12.669 E345.77936 ; support material | |
| G1 X0.911 Y10.146 E345.82135 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E345.85464 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E345.87492 ; support material | |
| G1 X-4.891 Y8.924 E345.88559 ; support material | |
| G1 X-7.853 Y8.924 E345.92753 ; support material | |
| G1 X-7.325 Y9.903 E345.94329 ; support material | |
| G1 X-8.883 Y12.426 E345.98529 ; support material | |
| G1 X-11.191 Y12.358 E346.01800 ; support material | |
| G1 X-11.659 Y13.116 E346.03063 ; support material | |
| G1 X-8.296 Y13.116 E346.07827 ; support material | |
| G1 X-8.561 Y12.625 E346.08618 ; support material | |
| G1 X-7.003 Y10.102 E346.12818 ; support material | |
| G1 X-4.695 Y10.170 E346.16089 ; support material | |
| G1 F2100.000 E341.16089 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E346.16089 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E346.17222 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E346.20196 ; support material | |
| G1 X-11.520 Y4.395 E346.21329 ; support material | |
| G1 X-9.420 Y4.395 E346.24304 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E346.24365 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E346.26267 ; support material | |
| G1 X-11.141 Y4.016 E346.26327 ; support material | |
| G1 X-9.799 Y4.016 E346.28230 ; support material | |
| G1 F2100.000 E341.28230 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E346.28230 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E346.30231 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E346.30861 ; support material | |
| G1 X-12.930 Y9.927 E346.32532 ; support material | |
| G1 X-15.239 Y9.859 E346.35803 ; support material | |
| G1 X-16.796 Y12.382 E346.40002 ; support material | |
| G1 X-16.401 Y13.116 E346.41184 ; support material | |
| G1 X-12.104 Y13.116 E346.47270 ; support material | |
| G1 X-11.513 Y12.159 E346.48863 ; support material | |
| G1 X-12.608 Y10.126 E346.52134 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E346.53319 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E346.59402 ; support material | |
| G1 X-20.844 Y9.883 E346.60999 ; support material | |
| G1 X-19.749 Y11.916 E346.64270 ; support material | |
| G1 X-20.490 Y13.116 E346.66268 ; support material | |
| G1 X-20.045 Y13.116 E346.66898 ; support material | |
| G1 X-19.427 Y12.115 E346.68565 ; support material | |
| G1 X-17.119 Y12.183 E346.71836 ; support material | |
| G1 X-15.561 Y9.660 E346.76036 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E346.77235 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E346.77865 ; support material | |
| G1 X-21.141 Y9.644 E346.78885 ; support material | |
| G1 F2100.000 E341.78885 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E346.78885 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E346.79515 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E346.79586 ; support material | |
| G1 X-20.018 Y4.016 E346.80216 ; support material | |
| G1 X-19.991 Y3.974 E346.80288 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E346.82129 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E346.83404 ; support material | |
| G1 X-21.520 Y4.395 E346.86378 ; support material | |
| G1 X-19.420 Y4.395 E346.89353 ; support material | |
| G1 X-19.420 Y3.595 E346.90486 ; support material | |
| G1 X-20.620 Y3.595 E346.92185 ; support material | |
| M126 ; enable fan | |
| M73 P14 ; update progress | |
| G1 F2100.000 E341.92185 ; retract | |
| G1 Z3.000 F7800.000 ; move to next layer (25) and lift | |
| G1 X10.808 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E346.92185 F2100.000 ; compensate retraction | |
| G1 X10.808 Y-0.169 E346.95062 F2124.750 ; perimeter | |
| G1 X18.184 Y-0.169 E347.11030 ; perimeter | |
| G1 X18.184 Y1.159 E347.13906 ; perimeter | |
| G1 X10.868 Y1.159 E347.29744 ; perimeter | |
| G1 X10.230 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X10.230 Y-0.748 E347.35125 F2124.750 ; perimeter | |
| G1 X18.763 Y-0.748 E347.53597 ; perimeter | |
| G1 X18.763 Y1.738 E347.58979 ; perimeter | |
| G1 X10.290 Y1.738 E347.77321 ; perimeter | |
| G1 X9.009 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 X4.951 Y-4.409 E347.86104 F2124.750 ; perimeter | |
| G1 X4.951 Y-9.581 E347.97300 ; perimeter | |
| G1 X9.009 Y-9.581 E348.06083 ; perimeter | |
| G1 X9.009 Y-4.469 E348.17148 ; perimeter | |
| G1 X9.587 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.373 Y-3.831 E348.28436 F2124.750 ; perimeter | |
| G1 X4.373 Y-10.159 E348.42136 ; perimeter | |
| G1 X9.587 Y-10.159 E348.53424 ; perimeter | |
| G1 X9.587 Y-3.891 E348.66995 ; perimeter | |
| G1 X10.166 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.794 Y-3.252 E348.80788 F2124.750 ; perimeter | |
| G1 X3.794 Y-10.738 E348.96993 ; perimeter | |
| G1 X10.166 Y-10.738 E349.10785 ; perimeter | |
| G1 X10.166 Y-3.312 E349.26860 ; perimeter | |
| G1 F2100.000 E344.26860 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X3.152 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E349.26860 F2100.000 ; compensate retraction | |
| G1 X3.152 Y1.159 E349.29737 F2124.750 ; perimeter | |
| G1 X-18.184 Y1.159 E349.75925 ; perimeter | |
| G1 X-18.184 Y-0.169 E349.78801 ; perimeter | |
| G1 X3.092 Y-0.169 E350.24859 ; perimeter | |
| G1 X3.730 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.730 Y1.738 E350.30240 F2124.750 ; perimeter | |
| G1 X-18.763 Y1.738 E350.78932 ; perimeter | |
| G1 X-18.763 Y-0.748 E350.84314 ; perimeter | |
| G1 X3.670 Y-0.748 E351.32876 ; perimeter | |
| G1 X3.216 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.216 Y-11.316 E351.54502 F2124.750 ; perimeter | |
| G1 X10.744 Y-11.316 E351.70800 ; perimeter | |
| G1 X10.744 Y-1.326 E351.92426 ; perimeter | |
| G1 X19.341 Y-1.326 E352.11036 ; perimeter | |
| G1 X19.341 Y2.316 E352.18923 ; perimeter | |
| G1 X9.651 Y2.316 E352.39900 ; perimeter | |
| G1 X9.651 Y-2.674 E352.50702 ; perimeter | |
| G1 X4.309 Y-2.674 E352.62267 ; perimeter | |
| G1 X4.309 Y2.316 E352.73069 ; perimeter | |
| G1 X-19.341 Y2.316 E353.24266 ; perimeter | |
| G1 X-19.341 Y-1.326 E353.32152 ; perimeter | |
| G1 X3.156 Y-1.326 E353.80853 ; perimeter | |
| G1 X2.737 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.737 Y-11.795 E353.95003 F600.000 ; perimeter | |
| G1 X11.223 Y-11.795 E354.07022 ; perimeter | |
| G1 X11.223 Y-1.805 E354.21172 ; perimeter | |
| G1 X19.820 Y-1.805 E354.33349 ; perimeter | |
| G1 X19.820 Y2.795 E354.39865 ; perimeter | |
| G1 X9.173 Y2.795 E354.54946 ; perimeter | |
| G1 X9.173 Y-2.195 E354.62014 ; perimeter | |
| G1 X4.787 Y-2.195 E354.68225 ; perimeter | |
| G1 X4.787 Y2.795 E354.75293 ; perimeter | |
| G1 X-19.820 Y2.795 E355.10147 ; perimeter | |
| G1 X-19.820 Y-1.805 E355.16662 ; perimeter | |
| G1 X2.677 Y-1.805 E355.48527 ; perimeter | |
| G1 X3.137 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.371 Y-9.161 F7800.000 ; move to first fill point | |
| G1 X5.371 Y-4.829 E355.57907 F3187.124 ; fill | |
| G1 X6.014 Y-4.829 E355.59300 ; fill | |
| G1 X6.014 Y-9.161 E355.68680 ; fill | |
| G1 X6.658 Y-9.161 E355.70073 ; fill | |
| G1 X6.658 Y-4.829 E355.79453 ; fill | |
| G1 X7.302 Y-4.829 E355.80846 ; fill | |
| G1 X7.302 Y-9.161 E355.90226 ; fill | |
| G1 X7.946 Y-9.161 E355.91619 ; fill | |
| G1 X7.946 Y-4.829 E356.00999 ; fill | |
| G1 X8.589 Y-4.829 E356.02392 ; fill | |
| G1 X8.589 Y-9.161 E356.11772 ; fill | |
| G1 X10.198 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.198 Y-1.037 E356.13779 F600.000 ; fill | |
| G1 F2100.000 E351.13779 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X3.762 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E356.13779 F2100.000 ; compensate retraction | |
| G1 X3.762 Y-2.963 E356.15786 F600.000 ; fill | |
| G1 X2.862 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E356.84022 F600.000 ; fill | |
| G1 F2100.000 E351.84022 ; retract | |
| G1 Z3.000 F7800.000 ; lift plate during travel | |
| G1 X11.098 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z2.800 F7800.000 ; restore layer Z | |
| G1 E356.84022 F2100.000 ; compensate retraction | |
| G1 X17.895 Y0.495 E357.06368 F600.000 ; fill | |
| M73 P14 ; update progress | |
| G1 F2100.000 E352.06368 ; retract | |
| G1 Z3.100 F7800.000 ; move to next layer (26) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.900 F7800.000 ; restore layer Z | |
| G1 E357.06368 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E357.09244 F2133.535 ; perimeter | |
| G1 X10.908 Y1.159 E357.24995 ; perimeter | |
| G1 X10.908 Y-0.169 E357.27872 ; perimeter | |
| G1 X18.124 Y-0.169 E357.43493 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E357.48874 F2133.535 ; perimeter | |
| G1 X10.330 Y1.738 E357.67130 ; perimeter | |
| G1 X10.330 Y-0.748 E357.72511 ; perimeter | |
| G1 X18.703 Y-0.748 E357.90637 ; perimeter | |
| G1 F2100.000 E352.90637 ; retract | |
| G1 Z3.100 F7800.000 ; lift plate during travel | |
| G1 X9.066 Y-4.409 F7800.000 ; move to first perimeter point | |
| G1 Z2.900 F7800.000 ; restore layer Z | |
| G1 E357.90637 F2100.000 ; compensate retraction | |
| G1 X4.894 Y-4.409 E357.99671 F2133.535 ; perimeter | |
| G1 X4.894 Y-9.581 E358.10866 ; perimeter | |
| G1 X9.066 Y-9.581 E358.19899 ; perimeter | |
| G1 X9.066 Y-4.469 E358.30965 ; perimeter | |
| G1 X9.645 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.315 Y-3.831 E358.42502 F2133.535 ; perimeter | |
| G1 X4.315 Y-10.159 E358.56203 ; perimeter | |
| G1 X9.645 Y-10.159 E358.67741 ; perimeter | |
| G1 X9.645 Y-3.891 E358.81311 ; perimeter | |
| G1 X10.223 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.737 Y-3.252 E358.95354 F2133.535 ; perimeter | |
| G1 X3.737 Y-10.738 E359.11559 ; perimeter | |
| G1 X10.223 Y-10.738 E359.25601 ; perimeter | |
| G1 X10.223 Y-3.312 E359.41677 ; perimeter | |
| G1 F2100.000 E354.41677 ; retract | |
| G1 Z3.100 F7800.000 ; lift plate during travel | |
| G1 X3.052 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z2.900 F7800.000 ; restore layer Z | |
| G1 E359.41677 F2100.000 ; compensate retraction | |
| G1 X3.052 Y1.159 E359.44553 F2133.535 ; perimeter | |
| G1 X-18.184 Y1.159 E359.90524 ; perimeter | |
| G1 X-18.184 Y-0.169 E359.93401 ; perimeter | |
| G1 X2.992 Y-0.169 E360.39242 ; perimeter | |
| G1 X3.630 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.630 Y1.738 E360.44623 F2133.535 ; perimeter | |
| G1 X-18.763 Y1.738 E360.93099 ; perimeter | |
| G1 X-18.763 Y-0.748 E360.98480 ; perimeter | |
| G1 X3.570 Y-0.748 E361.46826 ; perimeter | |
| G1 X3.158 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.158 Y-11.316 E361.68452 F2133.535 ; perimeter | |
| G1 X10.802 Y-11.316 E361.85000 ; perimeter | |
| G1 X10.802 Y-1.326 E362.06626 ; perimeter | |
| G1 X19.341 Y-1.326 E362.25112 ; perimeter | |
| G1 X19.341 Y2.316 E362.32998 ; perimeter | |
| G1 X9.751 Y2.316 E362.53758 ; perimeter | |
| G1 X9.751 Y-2.674 E362.64561 ; perimeter | |
| G1 X4.209 Y-2.674 E362.76558 ; perimeter | |
| G1 X4.209 Y2.316 E362.87360 ; perimeter | |
| G1 X-19.341 Y2.316 E363.38341 ; perimeter | |
| G1 X-19.341 Y-1.326 E363.46227 ; perimeter | |
| G1 X3.098 Y-1.326 E363.94803 ; perimeter | |
| G1 X2.679 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.679 Y-11.795 E364.08953 F600.000 ; perimeter | |
| G1 X11.281 Y-11.795 E364.21136 ; perimeter | |
| G1 X11.281 Y-1.805 E364.35286 ; perimeter | |
| G1 X19.820 Y-1.805 E364.47381 ; perimeter | |
| G1 X19.820 Y2.795 E364.53897 ; perimeter | |
| G1 X9.273 Y2.795 E364.68836 ; perimeter | |
| G1 X9.273 Y-2.195 E364.75904 ; perimeter | |
| G1 X4.687 Y-2.195 E364.82398 ; perimeter | |
| G1 X4.687 Y2.795 E364.89466 ; perimeter | |
| G1 X-19.820 Y2.795 E365.24179 ; perimeter | |
| G1 X-19.820 Y-1.805 E365.30694 ; perimeter | |
| G1 X2.619 Y-1.805 E365.62478 ; perimeter | |
| G1 X3.079 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X5.398 Y-9.076 F7800.000 ; move to first fill point | |
| G1 X8.562 Y-9.076 E365.66959 F3200.302 ; fill | |
| G1 X8.562 Y-4.914 E365.72854 ; fill | |
| G1 X5.398 Y-4.914 E365.77335 ; fill | |
| G1 X5.398 Y-9.016 E365.83146 ; fill | |
| G1 X5.815 Y-8.660 F7800.000 ; move to first fill point | |
| G1 X8.145 Y-8.660 E365.86446 F3200.302 ; fill | |
| G1 X8.145 Y-5.330 E365.91162 ; fill | |
| G1 X5.815 Y-5.330 E365.94462 ; fill | |
| G1 X5.815 Y-8.600 E365.99092 ; fill | |
| G1 X6.232 Y-8.243 F7800.000 ; move to first fill point | |
| G1 X7.728 Y-8.243 E366.01212 F3200.302 ; fill | |
| G1 X7.728 Y-5.747 E366.04747 ; fill | |
| G1 X6.232 Y-5.747 E366.06867 ; fill | |
| G1 X6.232 Y-8.183 E366.10316 ; fill | |
| G1 X6.648 Y-7.826 F7800.000 ; move to first fill point | |
| G1 X7.312 Y-7.826 E366.11256 F3200.302 ; fill | |
| G1 X7.312 Y-6.164 E366.13610 ; fill | |
| G1 X6.648 Y-6.164 E366.14549 ; fill | |
| G1 X6.648 Y-7.766 E366.16818 ; fill | |
| G1 X3.683 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.683 Y-1.037 E366.18825 F600.000 ; fill | |
| G1 X2.762 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E366.86733 F600.000 ; fill | |
| G1 F2100.000 E361.86733 ; retract | |
| G1 Z3.100 F7800.000 ; lift plate during travel | |
| G1 X10.277 Y-1.037 F7800.000 ; move to first fill point | |
| G1 Z2.900 F7800.000 ; restore layer Z | |
| G1 E366.86733 F2100.000 ; compensate retraction | |
| G1 X10.277 Y-2.963 E366.88740 F600.000 ; fill | |
| G1 X11.198 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E367.10757 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P14 ; update progress | |
| G1 F2100.000 E362.10757 ; retract | |
| G1 Z3.200 F7800.000 ; move to next layer (27) and lift | |
| G1 X2.952 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.000 F7800.000 ; restore layer Z | |
| G1 E367.10757 F2100.000 ; compensate retraction | |
| G1 X2.952 Y1.159 E367.13633 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E367.59388 ; perimeter | |
| G1 X-18.184 Y-0.169 E367.62264 ; perimeter | |
| G1 X2.892 Y-0.169 E368.07889 ; perimeter | |
| G1 X3.530 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.530 Y1.738 E368.13270 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E368.61530 ; perimeter | |
| G1 X-18.763 Y-0.748 E368.66911 ; perimeter | |
| G1 X3.470 Y-0.748 E369.15041 ; perimeter | |
| G1 X4.257 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X4.257 Y-10.159 E369.28741 F4800.000 ; perimeter | |
| G1 X4.867 Y-10.159 E369.30061 ; perimeter | |
| G1 X4.867 Y-3.831 E369.43761 ; perimeter | |
| G1 X4.317 Y-3.831 E369.44952 ; perimeter | |
| G1 X3.679 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.679 Y-10.738 E369.61157 F4800.000 ; perimeter | |
| G1 X5.446 Y-10.738 E369.64982 ; perimeter | |
| G1 X5.446 Y-3.252 E369.81187 ; perimeter | |
| G1 X3.739 Y-3.252 E369.84883 ; perimeter | |
| G1 X4.109 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X4.109 Y2.316 E369.95685 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E370.46449 ; perimeter | |
| G1 X-19.341 Y-1.326 E370.54335 ; perimeter | |
| G1 X3.100 Y-1.326 E371.02916 ; perimeter | |
| G1 X3.100 Y-11.316 E371.24542 ; perimeter | |
| G1 X6.024 Y-11.316 E371.30872 ; perimeter | |
| G1 X6.024 Y-2.674 E371.49582 ; perimeter | |
| G1 X4.169 Y-2.674 E371.53598 ; perimeter | |
| G1 X4.587 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.587 Y2.795 E371.60666 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E371.95237 ; perimeter | |
| G1 X-19.820 Y-1.805 E372.01753 ; perimeter | |
| G1 X2.622 Y-1.805 E372.33539 ; perimeter | |
| G1 X2.622 Y-11.795 E372.47689 ; perimeter | |
| G1 X6.503 Y-11.795 E372.53186 ; perimeter | |
| G1 X6.503 Y-2.195 E372.66784 ; perimeter | |
| G1 X4.647 Y-2.195 E372.69412 ; perimeter | |
| G1 X4.187 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.662 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E373.36991 F600.000 ; fill | |
| G1 X3.605 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.605 Y-2.963 E373.38998 F600.000 ; fill | |
| G1 F2100.000 E368.38998 ; retract | |
| G1 Z3.200 F7800.000 ; lift plate during travel | |
| G1 X11.008 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.000 F7800.000 ; restore layer Z | |
| G1 E373.38998 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E373.54533 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E373.57409 ; perimeter | |
| G1 X11.008 Y1.159 E373.72944 ; perimeter | |
| G1 X11.008 Y-0.109 E373.75690 ; perimeter | |
| G1 X10.430 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E373.93730 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E373.99111 ; perimeter | |
| G1 X10.430 Y1.738 E374.17150 ; perimeter | |
| G1 X10.430 Y-0.688 E374.22402 ; perimeter | |
| G1 X9.703 Y-3.831 F7800.000 ; move to first perimeter point | |
| G1 X9.093 Y-3.831 E374.23722 F4800.000 ; perimeter | |
| G1 X9.093 Y-10.159 E374.37422 ; perimeter | |
| G1 X9.703 Y-10.159 E374.38743 ; perimeter | |
| G1 X9.703 Y-3.891 E374.52313 ; perimeter | |
| G1 X10.281 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X8.514 Y-3.252 E374.56138 F4800.000 ; perimeter | |
| G1 X8.514 Y-10.738 E374.72343 ; perimeter | |
| G1 X10.281 Y-10.738 E374.76168 ; perimeter | |
| G1 X10.281 Y-3.312 E374.92244 ; perimeter | |
| G1 X9.851 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X7.936 Y-2.674 E374.96390 F4800.000 ; perimeter | |
| G1 X7.936 Y-11.316 E375.15100 ; perimeter | |
| G1 X10.860 Y-11.316 E375.21430 ; perimeter | |
| G1 X10.860 Y-1.326 E375.43056 ; perimeter | |
| G1 X19.341 Y-1.326 E375.61417 ; perimeter | |
| G1 X19.341 Y2.316 E375.69303 ; perimeter | |
| G1 X9.851 Y2.316 E375.89847 ; perimeter | |
| G1 X9.851 Y-2.614 E376.00519 ; perimeter | |
| G1 X9.373 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X7.457 Y-2.195 E376.03233 F1200.000 ; perimeter | |
| G1 X7.457 Y-11.795 E376.16830 ; perimeter | |
| G1 X11.338 Y-11.795 E376.22327 ; perimeter | |
| G1 X11.338 Y-1.805 E376.36477 ; perimeter | |
| G1 X19.820 Y-1.805 E376.48491 ; perimeter | |
| G1 X19.820 Y2.795 E376.55006 ; perimeter | |
| G1 X9.373 Y2.795 E376.69804 ; perimeter | |
| G1 X9.373 Y-2.135 E376.76787 ; perimeter | |
| G1 X9.373 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X10.355 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.355 Y-1.037 E376.78794 F600.000 ; fill | |
| G1 X11.298 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E377.00482 F600.000 ; fill | |
| M73 P15 ; update progress | |
| G1 F2100.000 E372.00482 ; retract | |
| G1 Z3.300 F7800.000 ; move to next layer (10) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E377.00482 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E377.00543 F600.000 ; support material | |
| G1 X18.859 Y3.974 E377.02445 ; support material | |
| G1 X18.859 Y4.016 E377.02506 ; support material | |
| G1 X20.201 Y4.016 E377.04408 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E377.05541 F600.000 ; support material | |
| G1 X18.480 Y3.595 E377.08516 ; support material | |
| G1 X18.480 Y4.395 E377.09649 ; support material | |
| G1 X20.580 Y4.395 E377.12623 ; support material | |
| G1 F2100.000 E372.12623 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E377.12623 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E377.13644 F600.000 ; support material | |
| G1 X20.013 Y10.899 E377.16686 ; support material | |
| G1 X17.705 Y10.831 E377.19957 ; support material | |
| G1 X16.294 Y13.116 E377.23762 ; support material | |
| G1 X21.141 Y13.116 E377.30628 ; support material | |
| G1 X21.141 Y12.595 E377.31367 ; support material | |
| G1 X20.335 Y11.098 E377.33775 ; support material | |
| G1 X21.141 Y9.792 E377.35949 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E377.40440 F600.000 ; support material | |
| G1 X12.099 Y10.855 E377.43655 ; support material | |
| G1 X13.195 Y12.888 E377.46926 ; support material | |
| G1 X13.054 Y13.116 E377.47306 ; support material | |
| G1 X13.498 Y13.116 E377.47936 ; support material | |
| G1 X13.517 Y13.087 E377.47986 ; support material | |
| G1 X14.519 Y13.116 E377.49406 ; support material | |
| G1 X15.849 Y13.116 E377.51290 ; support material | |
| G1 X17.383 Y10.632 E377.55425 ; support material | |
| G1 X16.462 Y8.924 E377.58174 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E377.64533 F600.000 ; support material | |
| G1 X9.147 Y10.389 E377.66890 ; support material | |
| G1 X7.589 Y12.912 E377.71090 ; support material | |
| G1 X5.281 Y12.844 E377.74361 ; support material | |
| G1 X5.112 Y13.116 E377.74815 ; support material | |
| G1 X7.914 Y13.116 E377.78783 ; support material | |
| G1 X9.469 Y10.588 E377.82988 ; support material | |
| G1 X11.777 Y10.656 E377.86259 ; support material | |
| G1 X12.847 Y8.924 E377.89142 ; support material | |
| G1 F2100.000 E372.89142 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E377.89142 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E377.90276 F600.000 ; support material | |
| G1 X9.236 Y3.595 E377.92179 ; support material | |
| G1 X8.851 Y4.395 E377.93436 ; support material | |
| G1 X10.580 Y4.395 E377.95885 ; support material | |
| G1 F2100.000 E372.95885 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E377.95885 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E377.96515 F600.000 ; support material | |
| G1 X3.541 Y10.413 E377.98994 ; support material | |
| G1 X1.233 Y10.345 E378.02265 ; support material | |
| G1 X-0.325 Y12.868 E378.06465 ; support material | |
| G1 X-0.191 Y13.116 E378.06865 ; support material | |
| G1 X4.668 Y13.116 E378.13747 ; support material | |
| G1 X4.959 Y12.645 E378.14531 ; support material | |
| G1 X3.863 Y10.612 E378.17802 ; support material | |
| G1 X4.906 Y8.924 E378.20613 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E378.21797 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E378.32957 ; support material | |
| G1 X-5.270 Y8.545 E378.34024 ; support material | |
| G1 X-21.520 Y8.545 E378.57041 ; support material | |
| G1 X-21.520 Y13.495 E378.64052 ; support material | |
| G1 X21.520 Y13.495 E379.25014 ; support material | |
| G1 X21.520 Y8.545 E379.32025 ; support material | |
| G1 X2.246 Y8.545 E379.59325 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E379.62504 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E379.66557 ; support material | |
| G1 X-4.372 Y10.369 E379.70217 ; support material | |
| G1 X-3.277 Y12.402 E379.73488 ; support material | |
| G1 X-3.718 Y13.116 E379.74677 ; support material | |
| G1 X-3.273 Y13.116 E379.75307 ; support material | |
| G1 X-2.955 Y12.601 E379.76166 ; support material | |
| G1 X-0.647 Y12.669 E379.79437 ; support material | |
| G1 X0.911 Y10.146 E379.83636 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E379.86965 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E379.88993 ; support material | |
| G1 X-4.891 Y8.924 E379.90060 ; support material | |
| G1 X-7.853 Y8.924 E379.94254 ; support material | |
| G1 X-7.325 Y9.903 E379.95830 ; support material | |
| G1 X-8.883 Y12.426 E380.00030 ; support material | |
| G1 X-11.191 Y12.358 E380.03301 ; support material | |
| G1 X-11.659 Y13.116 E380.04564 ; support material | |
| G1 X-8.296 Y13.116 E380.09328 ; support material | |
| G1 X-8.561 Y12.625 E380.10119 ; support material | |
| G1 X-7.003 Y10.102 E380.14319 ; support material | |
| G1 X-4.695 Y10.170 E380.17590 ; support material | |
| G1 F2100.000 E375.17590 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E380.17590 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E380.18723 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E380.21697 ; support material | |
| G1 X-11.520 Y4.395 E380.22830 ; support material | |
| G1 X-9.420 Y4.395 E380.25805 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E380.25866 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E380.27768 ; support material | |
| G1 X-11.141 Y4.016 E380.27828 ; support material | |
| G1 X-9.799 Y4.016 E380.29731 ; support material | |
| G1 F2100.000 E375.29731 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E380.29731 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E380.31732 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E380.32362 ; support material | |
| G1 X-12.930 Y9.927 E380.34033 ; support material | |
| G1 X-15.239 Y9.859 E380.37304 ; support material | |
| G1 X-16.796 Y12.382 E380.41503 ; support material | |
| G1 X-16.401 Y13.116 E380.42685 ; support material | |
| G1 X-12.104 Y13.116 E380.48771 ; support material | |
| G1 X-11.513 Y12.159 E380.50364 ; support material | |
| G1 X-12.608 Y10.126 E380.53635 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E380.54820 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E380.60903 ; support material | |
| G1 X-20.844 Y9.883 E380.62500 ; support material | |
| G1 X-19.749 Y11.916 E380.65771 ; support material | |
| G1 X-20.490 Y13.116 E380.67769 ; support material | |
| G1 X-20.045 Y13.116 E380.68399 ; support material | |
| G1 X-19.427 Y12.115 E380.70066 ; support material | |
| G1 X-17.119 Y12.183 E380.73337 ; support material | |
| G1 X-15.561 Y9.660 E380.77537 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E380.78736 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E380.79366 ; support material | |
| G1 X-21.141 Y9.644 E380.80386 ; support material | |
| G1 F2100.000 E375.80386 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E380.80386 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E380.81016 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E380.81087 ; support material | |
| G1 X-20.018 Y4.016 E380.81717 ; support material | |
| G1 X-19.991 Y3.974 E380.81789 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E380.83630 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E380.84905 ; support material | |
| G1 X-21.520 Y4.395 E380.87879 ; support material | |
| G1 X-19.420 Y4.395 E380.90854 ; support material | |
| G1 X-19.420 Y3.595 E380.91987 ; support material | |
| G1 X-20.620 Y3.595 E380.93686 ; support material | |
| M126 ; enable fan | |
| M73 P15 ; update progress | |
| G1 F2100.000 E375.93686 ; retract | |
| G1 Z3.300 F7800.000 ; move to next layer (28) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E380.93686 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E380.96563 F2381.419 ; perimeter | |
| G1 X2.852 Y-0.169 E381.42101 ; perimeter | |
| G1 X2.852 Y1.159 E381.44978 ; perimeter | |
| G1 X-18.124 Y1.159 E381.90386 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E381.95767 F2381.419 ; perimeter | |
| G1 X3.430 Y-0.748 E382.43810 ; perimeter | |
| G1 X3.430 Y1.738 E382.49191 ; perimeter | |
| G1 X-18.703 Y1.738 E382.97105 ; perimeter | |
| G1 F2100.000 E377.97105 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X3.642 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E382.97105 F2100.000 ; compensate retraction | |
| G1 X3.642 Y-10.738 E383.13310 F2381.419 ; perimeter | |
| G1 X5.204 Y-10.738 E383.16691 ; perimeter | |
| G1 X5.204 Y-3.252 E383.32897 ; perimeter | |
| G1 X3.702 Y-3.252 E383.36148 ; perimeter | |
| G1 X4.009 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X4.009 Y2.316 E383.46951 F2381.419 ; perimeter | |
| G1 X-19.341 Y2.316 E383.97498 ; perimeter | |
| G1 X-19.341 Y-1.326 E384.05384 ; perimeter | |
| G1 X3.064 Y-1.326 E384.53886 ; perimeter | |
| G1 X3.064 Y-11.316 E384.75512 ; perimeter | |
| G1 X5.783 Y-11.316 E384.81399 ; perimeter | |
| G1 X5.783 Y-2.674 E385.00109 ; perimeter | |
| G1 X4.069 Y-2.674 E385.03819 ; perimeter | |
| G1 X4.487 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.487 Y2.795 E385.10887 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E385.45316 ; perimeter | |
| G1 X-19.820 Y-1.805 E385.51832 ; perimeter | |
| G1 X2.585 Y-1.805 E385.83566 ; perimeter | |
| G1 X2.585 Y-11.795 E385.97716 ; perimeter | |
| G1 X6.261 Y-11.795 E386.02924 ; perimeter | |
| G1 X6.261 Y-2.195 E386.16521 ; perimeter | |
| G1 X4.547 Y-2.195 E386.18949 ; perimeter | |
| G1 X4.087 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.562 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E386.86199 F600.000 ; fill | |
| G1 X3.536 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.536 Y-2.963 E386.88206 F600.000 ; fill | |
| G1 X4.423 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X4.423 Y-10.449 E387.10912 F600.000 ; fill | |
| G1 F2100.000 E382.10912 ; retract | |
| G1 Z3.300 F7800.000 ; lift plate during travel | |
| G1 X11.108 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.100 F7800.000 ; restore layer Z | |
| G1 E387.10912 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E387.26230 F2381.419 ; perimeter | |
| G1 X18.184 Y1.159 E387.29107 ; perimeter | |
| G1 X11.108 Y1.159 E387.44425 ; perimeter | |
| G1 X11.108 Y-0.109 E387.47172 ; perimeter | |
| G1 X10.530 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E387.64995 F2381.419 ; perimeter | |
| G1 X18.763 Y1.738 E387.70376 ; perimeter | |
| G1 X10.530 Y1.738 E387.88199 ; perimeter | |
| G1 X10.530 Y-0.688 E387.93450 ; perimeter | |
| G1 X10.318 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X8.756 Y-3.252 E387.96832 F2381.419 ; perimeter | |
| G1 X8.756 Y-10.738 E388.13037 ; perimeter | |
| G1 X10.318 Y-10.738 E388.16419 ; perimeter | |
| G1 X10.318 Y-3.312 E388.32494 ; perimeter | |
| G1 X9.951 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X8.177 Y-2.674 E388.36335 F2381.419 ; perimeter | |
| G1 X8.177 Y-11.316 E388.55044 ; perimeter | |
| G1 X10.896 Y-11.316 E388.60931 ; perimeter | |
| G1 X10.896 Y-1.326 E388.82557 ; perimeter | |
| G1 X19.341 Y-1.326 E389.00839 ; perimeter | |
| G1 X19.341 Y2.316 E389.08725 ; perimeter | |
| G1 X9.951 Y2.316 E389.29052 ; perimeter | |
| G1 X9.951 Y-2.614 E389.39725 ; perimeter | |
| G1 X9.473 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X7.699 Y-2.195 E389.42238 F600.000 ; perimeter | |
| G1 X7.699 Y-11.795 E389.55835 ; perimeter | |
| G1 X11.375 Y-11.795 E389.61042 ; perimeter | |
| G1 X11.375 Y-1.805 E389.75192 ; perimeter | |
| G1 X19.820 Y-1.805 E389.87154 ; perimeter | |
| G1 X19.820 Y2.795 E389.93669 ; perimeter | |
| G1 X9.473 Y2.795 E390.08326 ; perimeter | |
| G1 X9.473 Y-2.135 E390.15308 ; perimeter | |
| G1 X9.473 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X9.537 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X9.537 Y-10.449 E390.38015 F600.000 ; fill | |
| G1 X10.424 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.424 Y-1.037 E390.40022 F600.000 ; fill | |
| G1 X11.398 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E390.61381 F600.000 ; fill | |
| M73 P16 ; update progress | |
| G1 F2100.000 E385.61381 ; retract | |
| G1 Z3.400 F7800.000 ; move to next layer (29) and lift | |
| G1 X2.752 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.200 F7800.000 ; restore layer Z | |
| G1 E390.61381 F2100.000 ; compensate retraction | |
| G1 X2.752 Y1.159 E390.64258 F2303.672 ; perimeter | |
| G1 X-18.184 Y1.159 E391.09579 ; perimeter | |
| G1 X-18.184 Y-0.169 E391.12456 ; perimeter | |
| G1 X2.692 Y-0.169 E391.57648 ; perimeter | |
| G1 X3.330 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.330 Y1.738 E391.63029 F2303.672 ; perimeter | |
| G1 X-18.763 Y1.738 E392.10855 ; perimeter | |
| G1 X-18.763 Y-0.748 E392.16237 ; perimeter | |
| G1 X3.270 Y-0.748 E392.63933 ; perimeter | |
| G1 X3.610 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.610 Y-10.738 E392.80138 F2303.672 ; perimeter | |
| G1 X4.963 Y-10.738 E392.83068 ; perimeter | |
| G1 X4.963 Y-3.252 E392.99273 ; perimeter | |
| G1 X3.670 Y-3.252 E393.02073 ; perimeter | |
| G1 X3.909 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.909 Y2.316 E393.12875 F2303.672 ; perimeter | |
| G1 X-19.341 Y2.316 E393.63206 ; perimeter | |
| G1 X-19.341 Y-1.326 E393.71092 ; perimeter | |
| G1 X3.031 Y-1.326 E394.19524 ; perimeter | |
| G1 X3.031 Y-11.316 E394.41150 ; perimeter | |
| G1 X5.542 Y-11.316 E394.46584 ; perimeter | |
| G1 X5.542 Y-2.674 E394.65294 ; perimeter | |
| G1 X3.969 Y-2.674 E394.68698 ; perimeter | |
| G1 X4.387 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.387 Y2.795 E394.75766 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E395.10054 ; perimeter | |
| G1 X-19.820 Y-1.805 E395.16569 ; perimeter | |
| G1 X2.553 Y-1.805 E395.48258 ; perimeter | |
| G1 X2.553 Y-11.795 E395.62408 ; perimeter | |
| G1 X6.020 Y-11.795 E395.67319 ; perimeter | |
| G1 X6.020 Y-2.195 E395.80917 ; perimeter | |
| G1 X4.447 Y-2.195 E395.83144 ; perimeter | |
| G1 X3.987 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.462 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E396.50065 F600.000 ; fill | |
| G1 F2100.000 E391.50065 ; retract | |
| G1 Z3.400 F7800.000 ; lift plate during travel | |
| G1 X4.286 Y-3.541 F7800.000 ; move to first fill point | |
| G1 Z3.200 F7800.000 ; restore layer Z | |
| G1 E396.50065 F2100.000 ; compensate retraction | |
| G1 X4.286 Y-10.449 E396.72772 F600.000 ; fill | |
| G1 F2100.000 E391.72772 ; retract | |
| G1 Z3.400 F7800.000 ; lift plate during travel | |
| G1 X11.208 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.200 F7800.000 ; restore layer Z | |
| G1 E396.72772 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E396.87873 F2303.672 ; perimeter | |
| G1 X18.184 Y1.159 E396.90750 ; perimeter | |
| G1 X11.208 Y1.159 E397.05852 ; perimeter | |
| G1 X11.208 Y-0.109 E397.08598 ; perimeter | |
| G1 X10.630 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E397.26205 F2303.672 ; perimeter | |
| G1 X18.763 Y1.738 E397.31586 ; perimeter | |
| G1 X10.630 Y1.738 E397.49192 ; perimeter | |
| G1 X10.630 Y-0.688 E397.54444 ; perimeter | |
| G1 X10.350 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X8.997 Y-3.252 E397.57373 F2303.672 ; perimeter | |
| G1 X8.997 Y-10.738 E397.73578 ; perimeter | |
| G1 X10.350 Y-10.738 E397.76508 ; perimeter | |
| G1 X10.350 Y-3.312 E397.92583 ; perimeter | |
| G1 X10.051 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X8.418 Y-2.674 E397.96117 F2303.672 ; perimeter | |
| G1 X8.418 Y-11.316 E398.14827 ; perimeter | |
| G1 X10.929 Y-11.316 E398.20262 ; perimeter | |
| G1 X10.929 Y-1.326 E398.41888 ; perimeter | |
| G1 X19.341 Y-1.326 E398.60099 ; perimeter | |
| G1 X19.341 Y2.316 E398.67985 ; perimeter | |
| G1 X10.051 Y2.316 E398.88096 ; perimeter | |
| G1 X10.051 Y-2.614 E398.98769 ; perimeter | |
| G1 X9.573 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X7.940 Y-2.195 E399.01081 F600.000 ; perimeter | |
| G1 X7.940 Y-11.795 E399.14679 ; perimeter | |
| G1 X11.407 Y-11.795 E399.19590 ; perimeter | |
| G1 X11.407 Y-1.805 E399.33740 ; perimeter | |
| G1 X19.820 Y-1.805 E399.45655 ; perimeter | |
| G1 X19.820 Y2.795 E399.52171 ; perimeter | |
| G1 X9.573 Y2.795 E399.66685 ; perimeter | |
| G1 X9.573 Y-2.135 E399.73668 ; perimeter | |
| G1 X9.573 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X9.674 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X9.674 Y-10.449 E399.96375 F600.000 ; fill | |
| G1 X11.498 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E400.17405 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P16 ; update progress | |
| G1 F2100.000 E395.17405 ; retract | |
| G1 Z3.500 F7800.000 ; move to next layer (30) and lift | |
| G1 X2.652 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.300 F7800.000 ; restore layer Z | |
| G1 E400.17405 F2100.000 ; compensate retraction | |
| G1 X2.652 Y1.159 E400.20282 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E400.65387 ; perimeter | |
| G1 X-18.184 Y-0.169 E400.68264 ; perimeter | |
| G1 X2.592 Y-0.169 E401.13239 ; perimeter | |
| G1 X3.230 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.230 Y1.738 E401.18620 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E401.66230 ; perimeter | |
| G1 X-18.763 Y-0.748 E401.71612 ; perimeter | |
| G1 X3.170 Y-0.748 E402.19092 ; perimeter | |
| G1 X3.577 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.577 Y-10.738 E402.35297 F4800.000 ; perimeter | |
| G1 X4.722 Y-10.738 E402.37774 ; perimeter | |
| G1 X4.722 Y-3.252 E402.53979 ; perimeter | |
| G1 X3.637 Y-3.252 E402.56326 ; perimeter | |
| G1 X3.809 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.809 Y2.316 E402.67129 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E403.17244 ; perimeter | |
| G1 X-19.341 Y-1.326 E403.25130 ; perimeter | |
| G1 X2.999 Y-1.326 E403.73491 ; perimeter | |
| G1 X2.999 Y-11.316 E403.95117 ; perimeter | |
| G1 X5.300 Y-11.316 E404.00099 ; perimeter | |
| G1 X5.300 Y-2.674 E404.18808 ; perimeter | |
| G1 X3.869 Y-2.674 E404.21907 ; perimeter | |
| G1 X4.287 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.287 Y2.795 E404.28975 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E404.63121 ; perimeter | |
| G1 X-19.820 Y-1.805 E404.69636 ; perimeter | |
| G1 X2.520 Y-1.805 E405.01279 ; perimeter | |
| G1 X2.520 Y-11.795 E405.15429 ; perimeter | |
| G1 X5.779 Y-11.795 E405.20044 ; perimeter | |
| G1 X5.779 Y-2.195 E405.33642 ; perimeter | |
| G1 X4.347 Y-2.195 E405.35669 ; perimeter | |
| G1 X3.887 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.362 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E406.02261 F600.000 ; fill | |
| G1 F2100.000 E401.02261 ; retract | |
| G1 Z3.500 F7800.000 ; lift plate during travel | |
| G1 X4.149 Y-3.541 F7800.000 ; move to first fill point | |
| G1 Z3.300 F7800.000 ; restore layer Z | |
| G1 E406.02261 F2100.000 ; compensate retraction | |
| G1 X4.149 Y-10.449 E406.09460 F600.000 ; fill | |
| G1 F2100.000 E401.09460 ; retract | |
| G1 Z3.500 F7800.000 ; lift plate during travel | |
| G1 X11.308 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.300 F7800.000 ; restore layer Z | |
| G1 E406.09460 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E406.24346 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E406.27222 ; perimeter | |
| G1 X11.308 Y1.159 E406.42107 ; perimeter | |
| G1 X11.308 Y-0.109 E406.44854 ; perimeter | |
| G1 X10.730 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E406.62244 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E406.67625 ; perimeter | |
| G1 X10.730 Y1.738 E406.85015 ; perimeter | |
| G1 X10.730 Y-0.688 E406.90267 ; perimeter | |
| G1 X10.383 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.238 Y-3.252 E406.92744 F4800.000 ; perimeter | |
| G1 X9.238 Y-10.738 E407.08949 ; perimeter | |
| G1 X10.383 Y-10.738 E407.11426 ; perimeter | |
| G1 X10.383 Y-3.312 E407.27501 ; perimeter | |
| G1 X10.151 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X8.660 Y-2.674 E407.30730 F4800.000 ; perimeter | |
| G1 X8.660 Y-11.316 E407.49439 ; perimeter | |
| G1 X10.961 Y-11.316 E407.54422 ; perimeter | |
| G1 X10.961 Y-1.326 E407.76047 ; perimeter | |
| G1 X19.341 Y-1.326 E407.94188 ; perimeter | |
| G1 X19.341 Y2.316 E408.02074 ; perimeter | |
| G1 X10.151 Y2.316 E408.21969 ; perimeter | |
| G1 X10.151 Y-2.614 E408.32642 ; perimeter | |
| G1 X9.673 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.181 Y-2.195 E408.34754 F1200.000 ; perimeter | |
| G1 X8.181 Y-11.795 E408.48351 ; perimeter | |
| G1 X11.440 Y-11.795 E408.52967 ; perimeter | |
| G1 X11.440 Y-1.805 E408.67117 ; perimeter | |
| G1 X19.820 Y-1.805 E408.78986 ; perimeter | |
| G1 X19.820 Y2.795 E408.85502 ; perimeter | |
| G1 X9.673 Y2.795 E408.99875 ; perimeter | |
| G1 X9.673 Y-2.135 E409.06857 ; perimeter | |
| G1 X9.673 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X9.811 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X9.811 Y-10.449 E409.14056 F600.000 ; fill | |
| G1 X11.598 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E409.34759 F600.000 ; fill | |
| M73 P16 ; update progress | |
| G1 F2100.000 E404.34759 ; retract | |
| G1 Z3.600 F7800.000 ; move to next layer (11) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E409.34759 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E409.34819 F600.000 ; support material | |
| G1 X18.859 Y3.974 E409.36721 ; support material | |
| G1 X18.859 Y4.016 E409.36782 ; support material | |
| G1 X20.201 Y4.016 E409.38684 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E409.39818 F600.000 ; support material | |
| G1 X18.480 Y3.595 E409.42792 ; support material | |
| G1 X18.480 Y4.395 E409.43925 ; support material | |
| G1 X20.580 Y4.395 E409.46900 ; support material | |
| G1 F2100.000 E404.46900 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E409.46900 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E409.47920 F600.000 ; support material | |
| G1 X20.013 Y10.899 E409.50962 ; support material | |
| G1 X17.705 Y10.831 E409.54234 ; support material | |
| G1 X16.294 Y13.116 E409.58038 ; support material | |
| G1 X21.141 Y13.116 E409.64904 ; support material | |
| G1 X21.141 Y12.595 E409.65644 ; support material | |
| G1 X20.335 Y11.098 E409.68052 ; support material | |
| G1 X21.141 Y9.792 E409.70225 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E409.74716 F600.000 ; support material | |
| G1 X12.099 Y10.855 E409.77931 ; support material | |
| G1 X13.195 Y12.888 E409.81202 ; support material | |
| G1 X13.054 Y13.116 E409.81583 ; support material | |
| G1 X13.498 Y13.116 E409.82213 ; support material | |
| G1 X13.517 Y13.087 E409.82262 ; support material | |
| G1 X14.519 Y13.116 E409.83682 ; support material | |
| G1 X15.849 Y13.116 E409.85566 ; support material | |
| G1 X17.383 Y10.632 E409.89701 ; support material | |
| G1 X16.462 Y8.924 E409.92450 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E409.98809 F600.000 ; support material | |
| G1 X9.147 Y10.389 E410.01167 ; support material | |
| G1 X7.589 Y12.912 E410.05366 ; support material | |
| G1 X5.281 Y12.844 E410.08638 ; support material | |
| G1 X5.112 Y13.116 E410.09091 ; support material | |
| G1 X7.914 Y13.116 E410.13060 ; support material | |
| G1 X9.469 Y10.588 E410.17264 ; support material | |
| G1 X11.777 Y10.656 E410.20535 ; support material | |
| G1 X12.847 Y8.924 E410.23419 ; support material | |
| G1 F2100.000 E405.23419 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E410.23419 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E410.24552 F600.000 ; support material | |
| G1 X9.236 Y3.595 E410.26455 ; support material | |
| G1 X8.851 Y4.395 E410.27713 ; support material | |
| G1 X10.580 Y4.395 E410.30161 ; support material | |
| G1 F2100.000 E405.30161 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E410.30161 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E410.30791 F600.000 ; support material | |
| G1 X3.541 Y10.413 E410.33271 ; support material | |
| G1 X1.233 Y10.345 E410.36542 ; support material | |
| G1 X-0.325 Y12.868 E410.40742 ; support material | |
| G1 X-0.191 Y13.116 E410.41141 ; support material | |
| G1 X4.668 Y13.116 E410.48023 ; support material | |
| G1 X4.959 Y12.645 E410.48808 ; support material | |
| G1 X3.863 Y10.612 E410.52079 ; support material | |
| G1 X4.906 Y8.924 E410.54889 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E410.56073 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E410.67233 ; support material | |
| G1 X-5.270 Y8.545 E410.68301 ; support material | |
| G1 X-21.520 Y8.545 E410.91317 ; support material | |
| G1 X-21.520 Y13.495 E410.98328 ; support material | |
| G1 X21.520 Y13.495 E411.59291 ; support material | |
| G1 X21.520 Y8.545 E411.66302 ; support material | |
| G1 X2.246 Y8.545 E411.93601 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E411.96780 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E412.00833 ; support material | |
| G1 X-4.372 Y10.369 E412.04493 ; support material | |
| G1 X-3.277 Y12.402 E412.07764 ; support material | |
| G1 X-3.718 Y13.116 E412.08954 ; support material | |
| G1 X-3.273 Y13.116 E412.09584 ; support material | |
| G1 X-2.955 Y12.601 E412.10442 ; support material | |
| G1 X-0.647 Y12.669 E412.13713 ; support material | |
| G1 X0.911 Y10.146 E412.17913 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E412.21242 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E412.23269 ; support material | |
| G1 X-4.891 Y8.924 E412.24336 ; support material | |
| G1 X-7.853 Y8.924 E412.28531 ; support material | |
| G1 X-7.325 Y9.903 E412.30107 ; support material | |
| G1 X-8.883 Y12.426 E412.34306 ; support material | |
| G1 X-11.191 Y12.358 E412.37577 ; support material | |
| G1 X-11.659 Y13.116 E412.38840 ; support material | |
| G1 X-8.296 Y13.116 E412.43604 ; support material | |
| G1 X-8.561 Y12.625 E412.44395 ; support material | |
| G1 X-7.003 Y10.102 E412.48595 ; support material | |
| G1 X-4.695 Y10.170 E412.51866 ; support material | |
| G1 F2100.000 E407.51866 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E412.51866 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E412.52999 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E412.55973 ; support material | |
| G1 X-11.520 Y4.395 E412.57107 ; support material | |
| G1 X-9.420 Y4.395 E412.60081 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E412.60142 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E412.62044 ; support material | |
| G1 X-11.141 Y4.016 E412.62105 ; support material | |
| G1 X-9.799 Y4.016 E412.64007 ; support material | |
| G1 F2100.000 E407.64007 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E412.64007 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E412.66008 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E412.66638 ; support material | |
| G1 X-12.930 Y9.927 E412.68309 ; support material | |
| G1 X-15.239 Y9.859 E412.71580 ; support material | |
| G1 X-16.796 Y12.382 E412.75780 ; support material | |
| G1 X-16.401 Y13.116 E412.76961 ; support material | |
| G1 X-12.104 Y13.116 E412.83047 ; support material | |
| G1 X-11.513 Y12.159 E412.84641 ; support material | |
| G1 X-12.608 Y10.126 E412.87912 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E412.89097 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E412.95179 ; support material | |
| G1 X-20.844 Y9.883 E412.96776 ; support material | |
| G1 X-19.749 Y11.916 E413.00047 ; support material | |
| G1 X-20.490 Y13.116 E413.02045 ; support material | |
| G1 X-20.045 Y13.116 E413.02675 ; support material | |
| G1 X-19.427 Y12.115 E413.04343 ; support material | |
| G1 X-17.119 Y12.183 E413.07614 ; support material | |
| G1 X-15.561 Y9.660 E413.11813 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E413.13012 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E413.13642 ; support material | |
| G1 X-21.141 Y9.644 E413.14662 ; support material | |
| G1 F2100.000 E408.14662 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E413.14662 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E413.15292 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E413.15363 ; support material | |
| G1 X-20.018 Y4.016 E413.15994 ; support material | |
| G1 X-19.991 Y3.974 E413.16065 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E413.17906 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E413.19181 ; support material | |
| G1 X-21.520 Y4.395 E413.22156 ; support material | |
| G1 X-19.420 Y4.395 E413.25130 ; support material | |
| G1 X-19.420 Y3.595 E413.26263 ; support material | |
| G1 X-20.620 Y3.595 E413.27963 ; support material | |
| M126 ; enable fan | |
| M73 P17 ; update progress | |
| G1 F2100.000 E408.27963 ; retract | |
| G1 Z3.600 F7800.000 ; move to next layer (31) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E413.27963 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E413.30839 F2271.416 ; perimeter | |
| G1 X2.552 Y-0.169 E413.75728 ; perimeter | |
| G1 X2.552 Y1.159 E413.78605 ; perimeter | |
| G1 X-18.124 Y1.159 E414.23363 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E414.28745 F2271.416 ; perimeter | |
| G1 X3.130 Y-0.748 E414.76138 ; perimeter | |
| G1 X3.130 Y1.738 E414.81520 ; perimeter | |
| G1 X-18.703 Y1.738 E415.28783 ; perimeter | |
| G1 F2100.000 E410.28783 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X3.545 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E415.28783 F2100.000 ; compensate retraction | |
| G1 X3.545 Y-10.738 E415.44988 F2271.416 ; perimeter | |
| G1 X4.480 Y-10.738 E415.47013 ; perimeter | |
| G1 X4.480 Y-3.252 E415.63218 ; perimeter | |
| G1 X3.605 Y-3.252 E415.65113 ; perimeter | |
| G1 X3.709 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.709 Y2.316 E415.75916 F2271.416 ; perimeter | |
| G1 X-19.341 Y2.316 E416.25814 ; perimeter | |
| G1 X-19.341 Y-1.326 E416.33700 ; perimeter | |
| G1 X2.966 Y-1.326 E416.81991 ; perimeter | |
| G1 X2.966 Y-11.316 E417.03617 ; perimeter | |
| G1 X5.059 Y-11.316 E417.08147 ; perimeter | |
| G1 X5.059 Y-2.674 E417.26856 ; perimeter | |
| G1 X3.769 Y-2.674 E417.29649 ; perimeter | |
| G1 X4.187 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.187 Y2.795 E417.36716 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E417.70721 ; perimeter | |
| G1 X-19.820 Y-1.805 E417.77236 ; perimeter | |
| G1 X2.488 Y-1.805 E418.08833 ; perimeter | |
| G1 X2.488 Y-11.795 E418.22983 ; perimeter | |
| G1 X5.537 Y-11.795 E418.27302 ; perimeter | |
| G1 X5.537 Y-2.195 E418.40900 ; perimeter | |
| G1 X4.247 Y-2.195 E418.42727 ; perimeter | |
| G1 X3.787 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.262 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E419.08991 F600.000 ; fill | |
| G1 F2100.000 E414.08991 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X4.012 Y-3.541 F7800.000 ; move to first fill point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E419.08991 F2100.000 ; compensate retraction | |
| G1 X4.012 Y-10.449 E419.16190 F600.000 ; fill | |
| G1 F2100.000 E414.16190 ; retract | |
| G1 Z3.600 F7800.000 ; lift plate during travel | |
| G1 X11.408 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.400 F7800.000 ; restore layer Z | |
| G1 E419.16190 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E419.30858 F2271.416 ; perimeter | |
| G1 X18.184 Y1.159 E419.33735 ; perimeter | |
| G1 X11.408 Y1.159 E419.48404 ; perimeter | |
| G1 X11.408 Y-0.109 E419.51150 ; perimeter | |
| G1 X10.830 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E419.68324 F2271.416 ; perimeter | |
| G1 X18.763 Y1.738 E419.73705 ; perimeter | |
| G1 X10.830 Y1.738 E419.90878 ; perimeter | |
| G1 X10.830 Y-0.688 E419.96130 ; perimeter | |
| G1 X10.415 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.480 Y-3.252 E419.98155 F2271.416 ; perimeter | |
| G1 X9.480 Y-10.738 E420.14360 ; perimeter | |
| G1 X10.415 Y-10.738 E420.16385 ; perimeter | |
| G1 X10.415 Y-3.312 E420.32460 ; perimeter | |
| G1 X10.251 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X8.901 Y-2.674 E420.35382 F2271.416 ; perimeter | |
| G1 X8.901 Y-11.316 E420.54092 ; perimeter | |
| G1 X10.994 Y-11.316 E420.58622 ; perimeter | |
| G1 X10.994 Y-1.326 E420.80248 ; perimeter | |
| G1 X19.341 Y-1.326 E420.98318 ; perimeter | |
| G1 X19.341 Y2.316 E421.06204 ; perimeter | |
| G1 X10.251 Y2.316 E421.25883 ; perimeter | |
| G1 X10.251 Y-2.614 E421.36555 ; perimeter | |
| G1 X9.773 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.423 Y-2.195 E421.38467 F600.000 ; perimeter | |
| G1 X8.423 Y-11.795 E421.52065 ; perimeter | |
| G1 X11.472 Y-11.795 E421.56384 ; perimeter | |
| G1 X11.472 Y-1.805 E421.70534 ; perimeter | |
| G1 X19.820 Y-1.805 E421.82358 ; perimeter | |
| G1 X19.820 Y2.795 E421.88873 ; perimeter | |
| G1 X9.773 Y2.795 E422.03104 ; perimeter | |
| G1 X9.773 Y-2.135 E422.10087 ; perimeter | |
| G1 X9.773 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X9.948 Y-3.541 F7800.000 ; move to first fill point | |
| G1 X9.948 Y-10.449 E422.17286 F600.000 ; fill | |
| G1 X11.697 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E422.37659 F600.000 ; fill | |
| M73 P17 ; update progress | |
| G1 F2100.000 E417.37659 ; retract | |
| G1 Z3.700 F7800.000 ; move to next layer (32) and lift | |
| G1 X2.454 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.500 F7800.000 ; restore layer Z | |
| G1 E422.37659 F2100.000 ; compensate retraction | |
| G1 X2.454 Y1.159 E422.40536 F2034.356 ; perimeter | |
| G1 X-18.184 Y1.159 E422.85213 ; perimeter | |
| G1 X-18.184 Y-0.169 E422.88089 ; perimeter | |
| G1 X2.394 Y-0.169 E423.32636 ; perimeter | |
| G1 X3.032 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.032 Y1.738 E423.38018 F2034.356 ; perimeter | |
| G1 X-18.763 Y1.738 E423.85199 ; perimeter | |
| G1 X-18.763 Y-0.748 E423.90581 ; perimeter | |
| G1 X2.972 Y-0.748 E424.37632 ; perimeter | |
| G1 X3.512 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.512 Y-10.738 E424.53837 F2034.356 ; perimeter | |
| G1 X4.239 Y-10.738 E424.55410 ; perimeter | |
| G1 X4.239 Y-3.252 E424.71615 ; perimeter | |
| G1 X3.572 Y-3.252 E424.73058 ; perimeter | |
| G1 X3.611 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.611 Y2.316 E424.83860 F2034.356 ; perimeter | |
| G1 X-19.341 Y2.316 E425.33547 ; perimeter | |
| G1 X-19.341 Y-1.326 E425.41433 ; perimeter | |
| G1 X2.934 Y-1.326 E425.89653 ; perimeter | |
| G1 X2.934 Y-11.316 E426.11279 ; perimeter | |
| G1 X4.817 Y-11.316 E426.15357 ; perimeter | |
| G1 X4.817 Y-2.674 E426.34067 ; perimeter | |
| G1 X3.671 Y-2.674 E426.36548 ; perimeter | |
| G1 X4.090 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.090 Y2.795 E426.43616 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E426.77481 ; perimeter | |
| G1 X-19.820 Y-1.805 E426.83997 ; perimeter | |
| G1 X2.455 Y-1.805 E427.15548 ; perimeter | |
| G1 X2.455 Y-11.795 E427.29698 ; perimeter | |
| G1 X5.296 Y-11.795 E427.33721 ; perimeter | |
| G1 X5.296 Y-2.195 E427.47319 ; perimeter | |
| G1 X4.150 Y-2.195 E427.48942 ; perimeter | |
| G1 X3.690 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.165 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E428.14884 F600.000 ; fill | |
| G1 F2100.000 E423.14884 ; retract | |
| G1 Z3.700 F7800.000 ; lift plate during travel | |
| G1 X11.506 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.500 F7800.000 ; restore layer Z | |
| G1 E428.14884 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E428.29341 F2034.356 ; perimeter | |
| G1 X18.184 Y1.159 E428.32218 ; perimeter | |
| G1 X11.506 Y1.159 E428.46675 ; perimeter | |
| G1 X11.506 Y-0.109 E428.49421 ; perimeter | |
| G1 X10.928 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E428.66383 F2034.356 ; perimeter | |
| G1 X18.763 Y1.738 E428.71764 ; perimeter | |
| G1 X10.928 Y1.738 E428.88726 ; perimeter | |
| G1 X10.928 Y-0.688 E428.93977 ; perimeter | |
| G1 X10.448 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.721 Y-3.252 E428.95550 F2034.356 ; perimeter | |
| G1 X9.721 Y-10.738 E429.11755 ; perimeter | |
| G1 X10.448 Y-10.738 E429.13328 ; perimeter | |
| G1 X10.448 Y-3.312 E429.29403 ; perimeter | |
| G1 X10.349 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.143 Y-2.674 E429.32014 F2034.356 ; perimeter | |
| G1 X9.143 Y-11.316 E429.50724 ; perimeter | |
| G1 X11.026 Y-11.316 E429.54802 ; perimeter | |
| G1 X11.026 Y-1.326 E429.76428 ; perimeter | |
| G1 X19.341 Y-1.326 E429.94428 ; perimeter | |
| G1 X19.341 Y2.316 E430.02314 ; perimeter | |
| G1 X10.349 Y2.316 E430.21780 ; perimeter | |
| G1 X10.349 Y-2.614 E430.32453 ; perimeter | |
| G1 X9.870 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.664 Y-2.195 E430.34161 F600.000 ; perimeter | |
| G1 X8.664 Y-11.795 E430.47759 ; perimeter | |
| G1 X11.505 Y-11.795 E430.51782 ; perimeter | |
| G1 X11.505 Y-1.805 E430.65932 ; perimeter | |
| G1 X19.820 Y-1.805 E430.77710 ; perimeter | |
| G1 X19.820 Y2.795 E430.84225 ; perimeter | |
| G1 X9.870 Y2.795 E430.98318 ; perimeter | |
| G1 X9.870 Y-2.135 E431.05301 ; perimeter | |
| G1 X9.870 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.795 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E431.25352 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P18 ; update progress | |
| G1 F2100.000 E426.25352 ; retract | |
| G1 Z3.800 F7800.000 ; move to next layer (33) and lift | |
| G1 X2.427 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.600 F7800.000 ; restore layer Z | |
| G1 E431.25352 F2100.000 ; compensate retraction | |
| G1 X2.427 Y1.159 E431.28229 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E431.72848 ; perimeter | |
| G1 X-18.184 Y-0.169 E431.75724 ; perimeter | |
| G1 X2.367 Y-0.169 E432.20213 ; perimeter | |
| G1 X3.006 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.006 Y1.738 E432.25595 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E432.72718 ; perimeter | |
| G1 X-18.763 Y-0.748 E432.78100 ; perimeter | |
| G1 X2.946 Y-0.748 E433.25093 ; perimeter | |
| G1 X3.480 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.480 Y-10.738 E433.41298 F4800.000 ; perimeter | |
| G1 X4.159 Y-10.738 E433.42768 ; perimeter | |
| G1 X4.159 Y-3.252 E433.58973 ; perimeter | |
| G1 X3.540 Y-3.252 E433.60314 ; perimeter | |
| G1 X3.584 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.584 Y2.316 E433.71116 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E434.20744 ; perimeter | |
| G1 X-19.341 Y-1.326 E434.28630 ; perimeter | |
| G1 X2.901 Y-1.326 E434.76780 ; perimeter | |
| G1 X2.901 Y-11.316 E434.98406 ; perimeter | |
| G1 X4.737 Y-11.316 E435.02381 ; perimeter | |
| G1 X4.737 Y-2.674 E435.21091 ; perimeter | |
| G1 X3.644 Y-2.674 E435.23457 ; perimeter | |
| G1 X4.063 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.063 Y2.795 E435.30525 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E435.64353 ; perimeter | |
| G1 X-19.820 Y-1.805 E435.70868 ; perimeter | |
| G1 X2.423 Y-1.805 E436.02373 ; perimeter | |
| G1 X2.423 Y-11.795 E436.16523 ; perimeter | |
| G1 X5.216 Y-11.795 E436.20479 ; perimeter | |
| G1 X5.216 Y-2.195 E436.34077 ; perimeter | |
| G1 X4.123 Y-2.195 E436.35625 ; perimeter | |
| G1 X3.663 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.138 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E437.01479 F600.000 ; fill | |
| G1 F2100.000 E432.01479 ; retract | |
| G1 Z3.800 F7800.000 ; lift plate during travel | |
| G1 X11.533 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.600 F7800.000 ; restore layer Z | |
| G1 E437.01479 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E437.15878 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E437.18754 ; perimeter | |
| G1 X11.533 Y1.159 E437.33153 ; perimeter | |
| G1 X11.533 Y-0.109 E437.35900 ; perimeter | |
| G1 X10.954 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E437.52803 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E437.58185 ; perimeter | |
| G1 X10.954 Y1.738 E437.75088 ; perimeter | |
| G1 X10.954 Y-0.688 E437.80340 ; perimeter | |
| G1 X10.480 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.801 Y-3.252 E437.81810 F4800.000 ; perimeter | |
| G1 X9.801 Y-10.738 E437.98015 ; perimeter | |
| G1 X10.480 Y-10.738 E437.99485 ; perimeter | |
| G1 X10.480 Y-3.312 E438.15560 ; perimeter | |
| G1 X10.376 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.223 Y-2.674 E438.18056 F4800.000 ; perimeter | |
| G1 X9.223 Y-11.316 E438.36766 ; perimeter | |
| G1 X11.059 Y-11.316 E438.40741 ; perimeter | |
| G1 X11.059 Y-1.326 E438.62367 ; perimeter | |
| G1 X19.341 Y-1.326 E438.80297 ; perimeter | |
| G1 X19.341 Y2.316 E438.88183 ; perimeter | |
| G1 X10.376 Y2.316 E439.07591 ; perimeter | |
| G1 X10.376 Y-2.614 E439.18264 ; perimeter | |
| G1 X9.897 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.744 Y-2.195 E439.19897 F1200.000 ; perimeter | |
| G1 X8.744 Y-11.795 E439.33494 ; perimeter | |
| G1 X11.537 Y-11.795 E439.37451 ; perimeter | |
| G1 X11.537 Y-1.805 E439.51601 ; perimeter | |
| G1 X19.820 Y-1.805 E439.63332 ; perimeter | |
| G1 X19.820 Y2.795 E439.69848 ; perimeter | |
| G1 X9.897 Y2.795 E439.83902 ; perimeter | |
| G1 X9.897 Y-2.135 E439.90885 ; perimeter | |
| G1 X9.897 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.822 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E440.10849 F600.000 ; fill | |
| M73 P18 ; update progress | |
| G1 F2100.000 E435.10849 ; retract | |
| G1 Z3.900 F7800.000 ; move to next layer (12) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E440.10849 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E440.10910 F600.000 ; support material | |
| G1 X18.859 Y3.974 E440.12812 ; support material | |
| G1 X18.859 Y4.016 E440.12872 ; support material | |
| G1 X20.201 Y4.016 E440.14775 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E440.15908 F600.000 ; support material | |
| G1 X18.480 Y3.595 E440.18882 ; support material | |
| G1 X18.480 Y4.395 E440.20015 ; support material | |
| G1 X20.580 Y4.395 E440.22990 ; support material | |
| G1 F2100.000 E435.22990 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E440.22990 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E440.24010 F600.000 ; support material | |
| G1 X20.013 Y10.899 E440.27053 ; support material | |
| G1 X17.705 Y10.831 E440.30324 ; support material | |
| G1 X16.294 Y13.116 E440.34128 ; support material | |
| G1 X21.141 Y13.116 E440.40995 ; support material | |
| G1 X21.141 Y12.595 E440.41734 ; support material | |
| G1 X20.335 Y11.098 E440.44142 ; support material | |
| G1 X21.141 Y9.792 E440.46316 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E440.50807 F600.000 ; support material | |
| G1 X12.099 Y10.855 E440.54021 ; support material | |
| G1 X13.195 Y12.888 E440.57292 ; support material | |
| G1 X13.054 Y13.116 E440.57673 ; support material | |
| G1 X13.498 Y13.116 E440.58303 ; support material | |
| G1 X13.517 Y13.087 E440.58352 ; support material | |
| G1 X14.519 Y13.116 E440.59773 ; support material | |
| G1 X15.849 Y13.116 E440.61656 ; support material | |
| G1 X17.383 Y10.632 E440.65792 ; support material | |
| G1 X16.462 Y8.924 E440.68540 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E440.74899 F600.000 ; support material | |
| G1 X9.147 Y10.389 E440.77257 ; support material | |
| G1 X7.589 Y12.912 E440.81457 ; support material | |
| G1 X5.281 Y12.844 E440.84728 ; support material | |
| G1 X5.112 Y13.116 E440.85181 ; support material | |
| G1 X7.914 Y13.116 E440.89150 ; support material | |
| G1 X9.469 Y10.588 E440.93354 ; support material | |
| G1 X11.777 Y10.656 E440.96625 ; support material | |
| G1 X12.847 Y8.924 E440.99509 ; support material | |
| G1 F2100.000 E435.99509 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E440.99509 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E441.00642 F600.000 ; support material | |
| G1 X9.236 Y3.595 E441.02545 ; support material | |
| G1 X8.851 Y4.395 E441.03803 ; support material | |
| G1 X10.580 Y4.395 E441.06251 ; support material | |
| G1 F2100.000 E436.06251 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E441.06251 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E441.06882 F600.000 ; support material | |
| G1 X3.541 Y10.413 E441.09361 ; support material | |
| G1 X1.233 Y10.345 E441.12632 ; support material | |
| G1 X-0.325 Y12.868 E441.16832 ; support material | |
| G1 X-0.191 Y13.116 E441.17232 ; support material | |
| G1 X4.668 Y13.116 E441.24113 ; support material | |
| G1 X4.959 Y12.645 E441.24898 ; support material | |
| G1 X3.863 Y10.612 E441.28169 ; support material | |
| G1 X4.906 Y8.924 E441.30979 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E441.32164 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E441.43324 ; support material | |
| G1 X-5.270 Y8.545 E441.44391 ; support material | |
| G1 X-21.520 Y8.545 E441.67407 ; support material | |
| G1 X-21.520 Y13.495 E441.74419 ; support material | |
| G1 X21.520 Y13.495 E442.35381 ; support material | |
| G1 X21.520 Y8.545 E442.42392 ; support material | |
| G1 X2.246 Y8.545 E442.69691 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E442.72870 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E442.76923 ; support material | |
| G1 X-4.372 Y10.369 E442.80583 ; support material | |
| G1 X-3.277 Y12.402 E442.83855 ; support material | |
| G1 X-3.718 Y13.116 E442.85044 ; support material | |
| G1 X-3.273 Y13.116 E442.85674 ; support material | |
| G1 X-2.955 Y12.601 E442.86532 ; support material | |
| G1 X-0.647 Y12.669 E442.89803 ; support material | |
| G1 X0.911 Y10.146 E442.94003 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E442.97332 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E442.99359 ; support material | |
| G1 X-4.891 Y8.924 E443.00427 ; support material | |
| G1 X-7.853 Y8.924 E443.04621 ; support material | |
| G1 X-7.325 Y9.903 E443.06197 ; support material | |
| G1 X-8.883 Y12.426 E443.10397 ; support material | |
| G1 X-11.191 Y12.358 E443.13668 ; support material | |
| G1 X-11.659 Y13.116 E443.14930 ; support material | |
| G1 X-8.296 Y13.116 E443.19694 ; support material | |
| G1 X-8.561 Y12.625 E443.20485 ; support material | |
| G1 X-7.003 Y10.102 E443.24685 ; support material | |
| G1 X-4.695 Y10.170 E443.27956 ; support material | |
| G1 F2100.000 E438.27956 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E443.27956 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E443.29089 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E443.32064 ; support material | |
| G1 X-11.520 Y4.395 E443.33197 ; support material | |
| G1 X-9.420 Y4.395 E443.36171 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E443.36232 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E443.38134 ; support material | |
| G1 X-11.141 Y4.016 E443.38195 ; support material | |
| G1 X-9.799 Y4.016 E443.40097 ; support material | |
| G1 F2100.000 E438.40097 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E443.40097 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E443.42098 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E443.42729 ; support material | |
| G1 X-12.930 Y9.927 E443.44399 ; support material | |
| G1 X-15.239 Y9.859 E443.47670 ; support material | |
| G1 X-16.796 Y12.382 E443.51870 ; support material | |
| G1 X-16.401 Y13.116 E443.53052 ; support material | |
| G1 X-12.104 Y13.116 E443.59137 ; support material | |
| G1 X-11.513 Y12.159 E443.60731 ; support material | |
| G1 X-12.608 Y10.126 E443.64002 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E443.65187 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E443.71269 ; support material | |
| G1 X-20.844 Y9.883 E443.72866 ; support material | |
| G1 X-19.749 Y11.916 E443.76137 ; support material | |
| G1 X-20.490 Y13.116 E443.78135 ; support material | |
| G1 X-20.045 Y13.116 E443.78766 ; support material | |
| G1 X-19.427 Y12.115 E443.80433 ; support material | |
| G1 X-17.119 Y12.183 E443.83704 ; support material | |
| G1 X-15.561 Y9.660 E443.87903 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E443.89102 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E443.89732 ; support material | |
| G1 X-21.141 Y9.644 E443.90752 ; support material | |
| G1 F2100.000 E438.90752 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E443.90752 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E443.91382 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E443.91454 ; support material | |
| G1 X-20.018 Y4.016 E443.92084 ; support material | |
| G1 X-19.991 Y3.974 E443.92155 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E443.93996 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E443.95271 ; support material | |
| G1 X-21.520 Y4.395 E443.98246 ; support material | |
| G1 X-19.420 Y4.395 E444.01220 ; support material | |
| G1 X-19.420 Y3.595 E444.02353 ; support material | |
| G1 X-20.620 Y3.595 E444.04053 ; support material | |
| M126 ; enable fan | |
| M73 P18 ; update progress | |
| G1 F2100.000 E439.04053 ; retract | |
| G1 Z3.900 F7800.000 ; move to next layer (34) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E444.04053 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E444.06929 F2026.477 ; perimeter | |
| G1 X2.400 Y-0.169 E444.51490 ; perimeter | |
| G1 X2.400 Y1.159 E444.54367 ; perimeter | |
| G1 X-18.124 Y1.159 E444.98798 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E445.04179 F2026.477 ; perimeter | |
| G1 X2.979 Y-0.748 E445.51245 ; perimeter | |
| G1 X2.979 Y1.738 E445.56626 ; perimeter | |
| G1 X-18.703 Y1.738 E446.03562 ; perimeter | |
| G1 F2100.000 E441.03562 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X3.447 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E446.03562 F2100.000 ; compensate retraction | |
| G1 X3.447 Y-10.738 E446.19767 F2026.477 ; perimeter | |
| G1 X4.117 Y-10.738 E446.21218 ; perimeter | |
| G1 X4.117 Y-3.252 E446.37423 ; perimeter | |
| G1 X3.507 Y-3.252 E446.38743 ; perimeter | |
| G1 X3.557 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.557 Y2.316 E446.49546 F2026.477 ; perimeter | |
| G1 X-19.341 Y2.316 E446.99116 ; perimeter | |
| G1 X-19.341 Y-1.326 E447.07002 ; perimeter | |
| G1 X2.869 Y-1.326 E447.55082 ; perimeter | |
| G1 X2.869 Y-11.316 E447.76708 ; perimeter | |
| G1 X4.696 Y-11.316 E447.80663 ; perimeter | |
| G1 X4.696 Y-2.674 E447.99373 ; perimeter | |
| G1 X3.617 Y-2.674 E448.01708 ; perimeter | |
| G1 X4.036 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.036 Y2.795 E448.08776 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E448.42565 ; perimeter | |
| G1 X-19.820 Y-1.805 E448.49081 ; perimeter | |
| G1 X2.390 Y-1.805 E448.80539 ; perimeter | |
| G1 X2.390 Y-11.795 E448.94689 ; perimeter | |
| G1 X5.174 Y-11.795 E448.98633 ; perimeter | |
| G1 X5.174 Y-2.195 E449.12230 ; perimeter | |
| G1 X4.096 Y-2.195 E449.13758 ; perimeter | |
| G1 X3.636 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.111 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E449.79524 F600.000 ; fill | |
| G1 F2100.000 E444.79524 ; retract | |
| G1 Z3.900 F7800.000 ; lift plate during travel | |
| G1 X11.560 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.700 F7800.000 ; restore layer Z | |
| G1 E449.79524 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E449.93865 F2026.477 ; perimeter | |
| G1 X18.184 Y1.159 E449.96741 ; perimeter | |
| G1 X11.560 Y1.159 E450.11082 ; perimeter | |
| G1 X11.560 Y-0.109 E450.13829 ; perimeter | |
| G1 X10.981 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E450.30675 F2026.477 ; perimeter | |
| G1 X18.763 Y1.738 E450.36056 ; perimeter | |
| G1 X10.981 Y1.738 E450.52901 ; perimeter | |
| G1 X10.981 Y-0.688 E450.58153 ; perimeter | |
| G1 X10.513 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.843 Y-3.252 E450.59603 F2026.477 ; perimeter | |
| G1 X9.843 Y-10.738 E450.75809 ; perimeter | |
| G1 X10.513 Y-10.738 E450.77259 ; perimeter | |
| G1 X10.513 Y-3.312 E450.93334 ; perimeter | |
| G1 X10.403 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.264 Y-2.674 E450.95799 F2026.477 ; perimeter | |
| G1 X9.264 Y-11.316 E451.14509 ; perimeter | |
| G1 X11.091 Y-11.316 E451.18464 ; perimeter | |
| G1 X11.091 Y-1.326 E451.40090 ; perimeter | |
| G1 X19.341 Y-1.326 E451.57950 ; perimeter | |
| G1 X19.341 Y2.316 E451.65836 ; perimeter | |
| G1 X10.403 Y2.316 E451.85186 ; perimeter | |
| G1 X10.403 Y-2.614 E451.95859 ; perimeter | |
| G1 X9.924 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.786 Y-2.195 E451.97471 F600.000 ; perimeter | |
| G1 X8.786 Y-11.795 E452.11069 ; perimeter | |
| G1 X11.570 Y-11.795 E452.15012 ; perimeter | |
| G1 X11.570 Y-1.805 E452.29162 ; perimeter | |
| G1 X19.820 Y-1.805 E452.40848 ; perimeter | |
| G1 X19.820 Y2.795 E452.47363 ; perimeter | |
| G1 X9.924 Y2.795 E452.61380 ; perimeter | |
| G1 X9.924 Y-2.135 E452.68363 ; perimeter | |
| G1 X9.924 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.849 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E452.88238 F600.000 ; fill | |
| M73 P19 ; update progress | |
| G1 F2100.000 E447.88238 ; retract | |
| G1 Z4.000 F7800.000 ; move to next layer (35) and lift | |
| G1 X2.374 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.800 F7800.000 ; restore layer Z | |
| G1 E452.88238 F2100.000 ; compensate retraction | |
| G1 X2.374 Y1.159 E452.91115 F2023.463 ; perimeter | |
| G1 X-18.184 Y1.159 E453.35618 ; perimeter | |
| G1 X-18.184 Y-0.169 E453.38494 ; perimeter | |
| G1 X2.314 Y-0.169 E453.82867 ; perimeter | |
| G1 X2.952 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.952 Y1.738 E453.88248 F2023.463 ; perimeter | |
| G1 X-18.763 Y1.738 E454.35256 ; perimeter | |
| G1 X-18.763 Y-0.748 E454.40637 ; perimeter | |
| G1 X2.892 Y-0.748 E454.87515 ; perimeter | |
| G1 X3.415 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.415 Y-10.738 E455.03720 F2023.463 ; perimeter | |
| G1 X4.076 Y-10.738 E455.05152 ; perimeter | |
| G1 X4.076 Y-3.252 E455.21357 ; perimeter | |
| G1 X3.475 Y-3.252 E455.22658 ; perimeter | |
| G1 X3.531 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.531 Y2.316 E455.33460 F2023.463 ; perimeter | |
| G1 X-19.341 Y2.316 E455.82973 ; perimeter | |
| G1 X-19.341 Y-1.326 E455.90859 ; perimeter | |
| G1 X2.836 Y-1.326 E456.38868 ; perimeter | |
| G1 X2.836 Y-11.316 E456.60494 ; perimeter | |
| G1 X4.654 Y-11.316 E456.64430 ; perimeter | |
| G1 X4.654 Y-2.674 E456.83140 ; perimeter | |
| G1 X3.591 Y-2.674 E456.85443 ; perimeter | |
| G1 X4.009 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.009 Y2.795 E456.92511 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E457.26263 ; perimeter | |
| G1 X-19.820 Y-1.805 E457.32778 ; perimeter | |
| G1 X2.358 Y-1.805 E457.64191 ; perimeter | |
| G1 X2.358 Y-11.795 E457.78341 ; perimeter | |
| G1 X5.133 Y-11.795 E457.82272 ; perimeter | |
| G1 X5.133 Y-2.195 E457.95869 ; perimeter | |
| G1 X4.069 Y-2.195 E457.97376 ; perimeter | |
| G1 X3.609 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.084 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E458.63054 F600.000 ; fill | |
| G1 F2100.000 E453.63054 ; retract | |
| G1 Z4.000 F7800.000 ; lift plate during travel | |
| G1 X11.586 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.800 F7800.000 ; restore layer Z | |
| G1 E458.63054 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E458.77337 F2023.463 ; perimeter | |
| G1 X18.184 Y1.159 E458.80213 ; perimeter | |
| G1 X11.586 Y1.159 E458.94496 ; perimeter | |
| G1 X11.586 Y-0.109 E458.97243 ; perimeter | |
| G1 X11.008 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E459.14030 F2023.463 ; perimeter | |
| G1 X18.763 Y1.738 E459.19412 ; perimeter | |
| G1 X11.008 Y1.738 E459.36199 ; perimeter | |
| G1 X11.008 Y-0.688 E459.41451 ; perimeter | |
| G1 X10.545 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.884 Y-3.252 E459.42882 F2023.463 ; perimeter | |
| G1 X9.884 Y-10.738 E459.59087 ; perimeter | |
| G1 X10.545 Y-10.738 E459.60518 ; perimeter | |
| G1 X10.545 Y-3.312 E459.76593 ; perimeter | |
| G1 X10.429 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.306 Y-2.674 E459.79026 F2023.463 ; perimeter | |
| G1 X9.306 Y-11.316 E459.97736 ; perimeter | |
| G1 X11.124 Y-11.316 E460.01672 ; perimeter | |
| G1 X11.124 Y-1.326 E460.23298 ; perimeter | |
| G1 X19.341 Y-1.326 E460.41088 ; perimeter | |
| G1 X19.341 Y2.316 E460.48974 ; perimeter | |
| G1 X10.429 Y2.316 E460.68266 ; perimeter | |
| G1 X10.429 Y-2.614 E460.78938 ; perimeter | |
| G1 X9.951 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.827 Y-2.195 E460.80530 F600.000 ; perimeter | |
| G1 X8.827 Y-11.795 E460.94128 ; perimeter | |
| G1 X11.602 Y-11.795 E460.98059 ; perimeter | |
| G1 X11.602 Y-1.805 E461.12209 ; perimeter | |
| G1 X19.820 Y-1.805 E461.23848 ; perimeter | |
| G1 X19.820 Y2.795 E461.30364 ; perimeter | |
| G1 X9.951 Y2.795 E461.44342 ; perimeter | |
| G1 X9.951 Y-2.135 E461.51325 ; perimeter | |
| G1 X9.951 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.876 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E461.71113 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P19 ; update progress | |
| G1 F2100.000 E456.71113 ; retract | |
| G1 Z4.100 F7800.000 ; move to next layer (36) and lift | |
| G1 X2.347 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.900 F7800.000 ; restore layer Z | |
| G1 E461.71113 F2100.000 ; compensate retraction | |
| G1 X2.347 Y1.159 E461.73989 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E462.18434 ; perimeter | |
| G1 X-18.184 Y-0.169 E462.21310 ; perimeter | |
| G1 X2.287 Y-0.169 E462.65626 ; perimeter | |
| G1 X2.925 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.925 Y1.738 E462.71007 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E463.17956 ; perimeter | |
| G1 X-18.763 Y-0.748 E463.23338 ; perimeter | |
| G1 X2.865 Y-0.748 E463.70158 ; perimeter | |
| G1 X3.382 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.382 Y-10.738 E463.86363 F4800.000 ; perimeter | |
| G1 X4.035 Y-10.738 E463.87775 ; perimeter | |
| G1 X4.035 Y-3.252 E464.03980 ; perimeter | |
| G1 X3.442 Y-3.252 E464.05262 ; perimeter | |
| G1 X3.504 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.504 Y2.316 E464.16064 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E464.65518 ; perimeter | |
| G1 X-19.341 Y-1.326 E464.73404 ; perimeter | |
| G1 X2.804 Y-1.326 E465.21343 ; perimeter | |
| G1 X2.804 Y-11.316 E465.42969 ; perimeter | |
| G1 X4.613 Y-11.316 E465.46886 ; perimeter | |
| G1 X4.613 Y-2.674 E465.65596 ; perimeter | |
| G1 X3.564 Y-2.674 E465.67867 ; perimeter | |
| G1 X3.982 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.982 Y2.795 E465.74935 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E466.08649 ; perimeter | |
| G1 X-19.820 Y-1.805 E466.15164 ; perimeter | |
| G1 X2.325 Y-1.805 E466.46531 ; perimeter | |
| G1 X2.325 Y-11.795 E466.60681 ; perimeter | |
| G1 X5.092 Y-11.795 E466.64599 ; perimeter | |
| G1 X5.092 Y-2.195 E466.78197 ; perimeter | |
| G1 X4.042 Y-2.195 E466.79683 ; perimeter | |
| G1 X3.582 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.057 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E467.45273 F600.000 ; fill | |
| G1 F2100.000 E462.45273 ; retract | |
| G1 Z4.100 F7800.000 ; lift plate during travel | |
| G1 X11.613 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z3.900 F7800.000 ; restore layer Z | |
| G1 E467.45273 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E467.59498 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E467.62374 ; perimeter | |
| G1 X11.613 Y1.159 E467.76599 ; perimeter | |
| G1 X11.613 Y-0.109 E467.79346 ; perimeter | |
| G1 X11.035 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E467.96075 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E468.01457 ; perimeter | |
| G1 X11.035 Y1.738 E468.18186 ; perimeter | |
| G1 X11.035 Y-0.688 E468.23438 ; perimeter | |
| G1 X10.578 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.925 Y-3.252 E468.24849 F4800.000 ; perimeter | |
| G1 X9.925 Y-10.738 E468.41055 ; perimeter | |
| G1 X10.578 Y-10.738 E468.42466 ; perimeter | |
| G1 X10.578 Y-3.312 E468.58542 ; perimeter | |
| G1 X10.456 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.347 Y-2.674 E468.60943 F4800.000 ; perimeter | |
| G1 X9.347 Y-11.316 E468.79653 ; perimeter | |
| G1 X11.156 Y-11.316 E468.83570 ; perimeter | |
| G1 X11.156 Y-1.326 E469.05195 ; perimeter | |
| G1 X19.341 Y-1.326 E469.22914 ; perimeter | |
| G1 X19.341 Y2.316 E469.30800 ; perimeter | |
| G1 X10.456 Y2.316 E469.50035 ; perimeter | |
| G1 X10.456 Y-2.614 E469.60707 ; perimeter | |
| G1 X9.978 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.868 Y-2.195 E469.62278 F1200.000 ; perimeter | |
| G1 X8.868 Y-11.795 E469.75876 ; perimeter | |
| G1 X11.635 Y-11.795 E469.79794 ; perimeter | |
| G1 X11.635 Y-1.805 E469.93944 ; perimeter | |
| G1 X19.820 Y-1.805 E470.05538 ; perimeter | |
| G1 X19.820 Y2.795 E470.12053 ; perimeter | |
| G1 X9.978 Y2.795 E470.25994 ; perimeter | |
| G1 X9.978 Y-2.135 E470.32977 ; perimeter | |
| G1 X9.978 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.903 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E470.52676 F600.000 ; fill | |
| M73 P20 ; update progress | |
| G1 F2100.000 E465.52676 ; retract | |
| G1 Z4.200 F7800.000 ; move to next layer (13) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E470.52676 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E470.52737 F600.000 ; support material | |
| G1 X18.859 Y3.974 E470.54639 ; support material | |
| G1 X18.859 Y4.016 E470.54700 ; support material | |
| G1 X20.201 Y4.016 E470.56602 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E470.57735 F600.000 ; support material | |
| G1 X18.480 Y3.595 E470.60709 ; support material | |
| G1 X18.480 Y4.395 E470.61843 ; support material | |
| G1 X20.580 Y4.395 E470.64817 ; support material | |
| G1 F2100.000 E465.64817 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E470.64817 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E470.65838 F600.000 ; support material | |
| G1 X20.013 Y10.899 E470.68880 ; support material | |
| G1 X17.705 Y10.831 E470.72151 ; support material | |
| G1 X16.294 Y13.116 E470.75956 ; support material | |
| G1 X21.141 Y13.116 E470.82822 ; support material | |
| G1 X21.141 Y12.595 E470.83561 ; support material | |
| G1 X20.335 Y11.098 E470.85969 ; support material | |
| G1 X21.141 Y9.792 E470.88143 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E470.92634 F600.000 ; support material | |
| G1 X12.099 Y10.855 E470.95849 ; support material | |
| G1 X13.195 Y12.888 E470.99120 ; support material | |
| G1 X13.054 Y13.116 E470.99500 ; support material | |
| G1 X13.498 Y13.116 E471.00130 ; support material | |
| G1 X13.517 Y13.087 E471.00179 ; support material | |
| G1 X14.519 Y13.116 E471.01600 ; support material | |
| G1 X15.849 Y13.116 E471.03483 ; support material | |
| G1 X17.383 Y10.632 E471.07619 ; support material | |
| G1 X16.462 Y8.924 E471.10368 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E471.16727 F600.000 ; support material | |
| G1 X9.147 Y10.389 E471.19084 ; support material | |
| G1 X7.589 Y12.912 E471.23284 ; support material | |
| G1 X5.281 Y12.844 E471.26555 ; support material | |
| G1 X5.112 Y13.116 E471.27009 ; support material | |
| G1 X7.914 Y13.116 E471.30977 ; support material | |
| G1 X9.469 Y10.588 E471.35181 ; support material | |
| G1 X11.777 Y10.656 E471.38452 ; support material | |
| G1 X12.847 Y8.924 E471.41336 ; support material | |
| G1 F2100.000 E466.41336 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E471.41336 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E471.42469 F600.000 ; support material | |
| G1 X9.236 Y3.595 E471.44372 ; support material | |
| G1 X8.851 Y4.395 E471.45630 ; support material | |
| G1 X10.580 Y4.395 E471.48079 ; support material | |
| G1 F2100.000 E466.48079 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E471.48079 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E471.48709 F600.000 ; support material | |
| G1 X3.541 Y10.413 E471.51188 ; support material | |
| G1 X1.233 Y10.345 E471.54459 ; support material | |
| G1 X-0.325 Y12.868 E471.58659 ; support material | |
| G1 X-0.191 Y13.116 E471.59059 ; support material | |
| G1 X4.668 Y13.116 E471.65940 ; support material | |
| G1 X4.959 Y12.645 E471.66725 ; support material | |
| G1 X3.863 Y10.612 E471.69996 ; support material | |
| G1 X4.906 Y8.924 E471.72807 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E471.73991 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E471.85151 ; support material | |
| G1 X-5.270 Y8.545 E471.86218 ; support material | |
| G1 X-21.520 Y8.545 E472.09235 ; support material | |
| G1 X-21.520 Y13.495 E472.16246 ; support material | |
| G1 X21.520 Y13.495 E472.77208 ; support material | |
| G1 X21.520 Y8.545 E472.84219 ; support material | |
| G1 X2.246 Y8.545 E473.11519 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E473.14698 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E473.18751 ; support material | |
| G1 X-4.372 Y10.369 E473.22411 ; support material | |
| G1 X-3.277 Y12.402 E473.25682 ; support material | |
| G1 X-3.718 Y13.116 E473.26871 ; support material | |
| G1 X-3.273 Y13.116 E473.27501 ; support material | |
| G1 X-2.955 Y12.601 E473.28359 ; support material | |
| G1 X-0.647 Y12.669 E473.31630 ; support material | |
| G1 X0.911 Y10.146 E473.35830 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E473.39159 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E473.41187 ; support material | |
| G1 X-4.891 Y8.924 E473.42254 ; support material | |
| G1 X-7.853 Y8.924 E473.46448 ; support material | |
| G1 X-7.325 Y9.903 E473.48024 ; support material | |
| G1 X-8.883 Y12.426 E473.52224 ; support material | |
| G1 X-11.191 Y12.358 E473.55495 ; support material | |
| G1 X-11.659 Y13.116 E473.56758 ; support material | |
| G1 X-8.296 Y13.116 E473.61522 ; support material | |
| G1 X-8.561 Y12.625 E473.62313 ; support material | |
| G1 X-7.003 Y10.102 E473.66512 ; support material | |
| G1 X-4.695 Y10.170 E473.69783 ; support material | |
| G1 F2100.000 E468.69783 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E473.69783 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E473.70917 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E473.73891 ; support material | |
| G1 X-11.520 Y4.395 E473.75024 ; support material | |
| G1 X-9.420 Y4.395 E473.77999 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E473.78059 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E473.79961 ; support material | |
| G1 X-11.141 Y4.016 E473.80022 ; support material | |
| G1 X-9.799 Y4.016 E473.81924 ; support material | |
| G1 F2100.000 E468.81924 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E473.81924 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E473.83926 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E473.84556 ; support material | |
| G1 X-12.930 Y9.927 E473.86226 ; support material | |
| G1 X-15.239 Y9.859 E473.89497 ; support material | |
| G1 X-16.796 Y12.382 E473.93697 ; support material | |
| G1 X-16.401 Y13.116 E473.94879 ; support material | |
| G1 X-12.104 Y13.116 E474.00965 ; support material | |
| G1 X-11.513 Y12.159 E474.02558 ; support material | |
| G1 X-12.608 Y10.126 E474.05829 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E474.07014 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E474.13097 ; support material | |
| G1 X-20.844 Y9.883 E474.14694 ; support material | |
| G1 X-19.749 Y11.916 E474.17965 ; support material | |
| G1 X-20.490 Y13.116 E474.19963 ; support material | |
| G1 X-20.045 Y13.116 E474.20593 ; support material | |
| G1 X-19.427 Y12.115 E474.22260 ; support material | |
| G1 X-17.119 Y12.183 E474.25531 ; support material | |
| G1 X-15.561 Y9.660 E474.29731 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E474.30930 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E474.31559 ; support material | |
| G1 X-21.141 Y9.644 E474.32579 ; support material | |
| G1 F2100.000 E469.32579 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E474.32579 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E474.33210 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E474.33281 ; support material | |
| G1 X-20.018 Y4.016 E474.33911 ; support material | |
| G1 X-19.991 Y3.974 E474.33983 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E474.35824 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E474.37099 ; support material | |
| G1 X-21.520 Y4.395 E474.40073 ; support material | |
| G1 X-19.420 Y4.395 E474.43048 ; support material | |
| G1 X-19.420 Y3.595 E474.44181 ; support material | |
| G1 X-20.620 Y3.595 E474.45880 ; support material | |
| M126 ; enable fan | |
| M73 P20 ; update progress | |
| G1 F2100.000 E469.45880 ; retract | |
| G1 Z4.200 F7800.000 ; move to next layer (37) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E474.45880 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E474.48757 F2017.433 ; perimeter | |
| G1 X2.320 Y-0.169 E474.93144 ; perimeter | |
| G1 X2.320 Y1.159 E474.96020 ; perimeter | |
| G1 X-18.124 Y1.159 E475.40277 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E475.45658 F2017.433 ; perimeter | |
| G1 X2.898 Y-0.748 E475.92550 ; perimeter | |
| G1 X2.898 Y1.738 E475.97931 ; perimeter | |
| G1 X-18.703 Y1.738 E476.44693 ; perimeter | |
| G1 F2100.000 E471.44693 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X3.350 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E476.44693 F2100.000 ; compensate retraction | |
| G1 X3.350 Y-10.738 E476.60898 F2017.433 ; perimeter | |
| G1 X3.993 Y-10.738 E476.62291 ; perimeter | |
| G1 X3.993 Y-3.252 E476.78496 ; perimeter | |
| G1 X3.410 Y-3.252 E476.79759 ; perimeter | |
| G1 X3.477 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.477 Y2.316 E476.90561 F2017.433 ; perimeter | |
| G1 X-19.341 Y2.316 E477.39957 ; perimeter | |
| G1 X-19.341 Y-1.326 E477.47843 ; perimeter | |
| G1 X2.771 Y-1.326 E477.95712 ; perimeter | |
| G1 X2.771 Y-11.316 E478.17338 ; perimeter | |
| G1 X4.572 Y-11.316 E478.21235 ; perimeter | |
| G1 X4.572 Y-2.674 E478.39945 ; perimeter | |
| G1 X3.537 Y-2.674 E478.42185 ; perimeter | |
| G1 X3.956 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.956 Y2.795 E478.49253 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E478.82929 ; perimeter | |
| G1 X-19.820 Y-1.805 E478.89444 ; perimeter | |
| G1 X2.293 Y-1.805 E479.20765 ; perimeter | |
| G1 X2.293 Y-11.795 E479.34915 ; perimeter | |
| G1 X5.050 Y-11.795 E479.38820 ; perimeter | |
| G1 X5.050 Y-2.195 E479.52418 ; perimeter | |
| G1 X4.016 Y-2.195 E479.53883 ; perimeter | |
| G1 X3.556 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.031 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E480.19385 F600.000 ; fill | |
| G1 F2100.000 E475.19385 ; retract | |
| G1 Z4.200 F7800.000 ; lift plate during travel | |
| G1 X11.640 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.000 F7800.000 ; restore layer Z | |
| G1 E480.19385 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E480.33552 F2017.433 ; perimeter | |
| G1 X18.184 Y1.159 E480.36428 ; perimeter | |
| G1 X11.640 Y1.159 E480.50595 ; perimeter | |
| G1 X11.640 Y-0.109 E480.53342 ; perimeter | |
| G1 X11.062 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E480.70013 F2017.433 ; perimeter | |
| G1 X18.763 Y1.738 E480.75395 ; perimeter | |
| G1 X11.062 Y1.738 E480.92066 ; perimeter | |
| G1 X11.062 Y-0.688 E480.97318 ; perimeter | |
| G1 X10.610 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X9.967 Y-3.252 E480.98710 F2017.433 ; perimeter | |
| G1 X9.967 Y-10.738 E481.14915 ; perimeter | |
| G1 X10.610 Y-10.738 E481.16308 ; perimeter | |
| G1 X10.610 Y-3.312 E481.32383 ; perimeter | |
| G1 X10.483 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.388 Y-2.674 E481.34753 F2017.433 ; perimeter | |
| G1 X9.388 Y-11.316 E481.53463 ; perimeter | |
| G1 X11.189 Y-11.316 E481.57360 ; perimeter | |
| G1 X11.189 Y-1.326 E481.78986 ; perimeter | |
| G1 X19.341 Y-1.326 E481.96635 ; perimeter | |
| G1 X19.341 Y2.316 E482.04521 ; perimeter | |
| G1 X10.483 Y2.316 E482.23697 ; perimeter | |
| G1 X10.483 Y-2.614 E482.34369 ; perimeter | |
| G1 X10.004 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.910 Y-2.195 E482.35920 F600.000 ; perimeter | |
| G1 X8.910 Y-11.795 E482.49517 ; perimeter | |
| G1 X11.667 Y-11.795 E482.53423 ; perimeter | |
| G1 X11.667 Y-1.805 E482.67573 ; perimeter | |
| G1 X19.820 Y-1.805 E482.79120 ; perimeter | |
| G1 X19.820 Y2.795 E482.85636 ; perimeter | |
| G1 X10.004 Y2.795 E482.99539 ; perimeter | |
| G1 X10.004 Y-2.135 E483.06522 ; perimeter | |
| G1 X10.004 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.929 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E483.26133 F600.000 ; fill | |
| M73 P20 ; update progress | |
| G1 F2100.000 E478.26133 ; retract | |
| G1 Z4.300 F7800.000 ; move to next layer (38) and lift | |
| G1 X2.293 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.100 F7800.000 ; restore layer Z | |
| G1 E483.26133 F2100.000 ; compensate retraction | |
| G1 X2.293 Y1.159 E483.29009 F2014.261 ; perimeter | |
| G1 X-18.184 Y1.159 E483.73338 ; perimeter | |
| G1 X-18.184 Y-0.169 E483.76215 ; perimeter | |
| G1 X2.233 Y-0.169 E484.20414 ; perimeter | |
| G1 X2.872 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.872 Y1.738 E484.25795 F2014.261 ; perimeter | |
| G1 X-18.763 Y1.738 E484.72629 ; perimeter | |
| G1 X-18.763 Y-0.748 E484.78010 ; perimeter | |
| G1 X2.812 Y-0.748 E485.24714 ; perimeter | |
| G1 X3.337 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.337 Y-10.738 E485.40919 F2014.261 ; perimeter | |
| G1 X3.952 Y-10.738 E485.42249 ; perimeter | |
| G1 X3.952 Y-3.252 E485.58454 ; perimeter | |
| G1 X3.397 Y-3.252 E485.59655 ; perimeter | |
| G1 X3.450 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.450 Y2.316 E485.70457 F2014.261 ; perimeter | |
| G1 X-19.341 Y2.316 E486.19796 ; perimeter | |
| G1 X-19.341 Y-1.326 E486.27682 ; perimeter | |
| G1 X2.758 Y-1.326 E486.75523 ; perimeter | |
| G1 X2.758 Y-11.316 E486.97149 ; perimeter | |
| G1 X4.530 Y-11.316 E487.00984 ; perimeter | |
| G1 X4.530 Y-2.674 E487.19694 ; perimeter | |
| G1 X3.510 Y-2.674 E487.21902 ; perimeter | |
| G1 X3.929 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.929 Y2.795 E487.28970 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E487.62608 ; perimeter | |
| G1 X-19.820 Y-1.805 E487.69123 ; perimeter | |
| G1 X2.280 Y-1.805 E488.00426 ; perimeter | |
| G1 X2.280 Y-11.795 E488.14576 ; perimeter | |
| G1 X5.009 Y-11.795 E488.18441 ; perimeter | |
| G1 X5.009 Y-2.195 E488.32038 ; perimeter | |
| G1 X3.989 Y-2.195 E488.33483 ; perimeter | |
| G1 X3.529 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.004 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E488.98897 F600.000 ; fill | |
| G1 F2100.000 E483.98897 ; retract | |
| G1 Z4.300 F7800.000 ; lift plate during travel | |
| G1 X11.667 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.100 F7800.000 ; restore layer Z | |
| G1 E488.98897 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E489.13006 F2014.261 ; perimeter | |
| G1 X18.184 Y1.159 E489.15882 ; perimeter | |
| G1 X11.667 Y1.159 E489.29991 ; perimeter | |
| G1 X11.667 Y-0.109 E489.32738 ; perimeter | |
| G1 X11.088 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E489.49351 F2014.261 ; perimeter | |
| G1 X18.763 Y1.738 E489.54733 ; perimeter | |
| G1 X11.088 Y1.738 E489.71346 ; perimeter | |
| G1 X11.088 Y-0.688 E489.76598 ; perimeter | |
| G1 X10.623 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.008 Y-3.252 E489.77928 F2014.261 ; perimeter | |
| G1 X10.008 Y-10.738 E489.94133 ; perimeter | |
| G1 X10.623 Y-10.738 E489.95464 ; perimeter | |
| G1 X10.623 Y-3.312 E490.11539 ; perimeter | |
| G1 X10.510 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.430 Y-2.674 E490.13877 F2014.261 ; perimeter | |
| G1 X9.430 Y-11.316 E490.32587 ; perimeter | |
| G1 X11.202 Y-11.316 E490.36422 ; perimeter | |
| G1 X11.202 Y-1.326 E490.58048 ; perimeter | |
| G1 X19.341 Y-1.326 E490.75669 ; perimeter | |
| G1 X19.341 Y2.316 E490.83555 ; perimeter | |
| G1 X10.510 Y2.316 E491.02674 ; perimeter | |
| G1 X10.510 Y-2.614 E491.13346 ; perimeter | |
| G1 X10.031 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.951 Y-2.195 E491.14876 F600.000 ; perimeter | |
| G1 X8.951 Y-11.795 E491.28473 ; perimeter | |
| G1 X11.680 Y-11.795 E491.32338 ; perimeter | |
| G1 X11.680 Y-1.805 E491.46488 ; perimeter | |
| G1 X19.820 Y-1.805 E491.58018 ; perimeter | |
| G1 X19.820 Y2.795 E491.64533 ; perimeter | |
| G1 X10.031 Y2.795 E491.78398 ; perimeter | |
| G1 X10.031 Y-2.135 E491.85381 ; perimeter | |
| G1 X10.031 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.956 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E492.04904 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P21 ; update progress | |
| G1 F2100.000 E487.04904 ; retract | |
| G1 Z4.400 F7800.000 ; move to next layer (39) and lift | |
| G1 X2.266 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.200 F7800.000 ; restore layer Z | |
| G1 E492.04904 F2100.000 ; compensate retraction | |
| G1 X2.266 Y1.159 E492.07780 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E492.52051 ; perimeter | |
| G1 X-18.184 Y-0.169 E492.54928 ; perimeter | |
| G1 X2.206 Y-0.169 E492.99069 ; perimeter | |
| G1 X2.845 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.845 Y1.738 E493.04450 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E493.51226 ; perimeter | |
| G1 X-18.763 Y-0.748 E493.56607 ; perimeter | |
| G1 X2.785 Y-0.748 E494.03253 ; perimeter | |
| G1 X3.326 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.326 Y-10.738 E494.19458 F4800.000 ; perimeter | |
| G1 X3.910 Y-10.738 E494.20722 ; perimeter | |
| G1 X3.910 Y-3.252 E494.36927 ; perimeter | |
| G1 X3.386 Y-3.252 E494.38060 ; perimeter | |
| G1 X3.423 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.423 Y2.316 E494.48863 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E494.98143 ; perimeter | |
| G1 X-19.341 Y-1.326 E495.06029 ; perimeter | |
| G1 X2.748 Y-1.326 E495.53847 ; perimeter | |
| G1 X2.748 Y-11.316 E495.75473 ; perimeter | |
| G1 X4.489 Y-11.316 E495.79242 ; perimeter | |
| G1 X4.489 Y-2.674 E495.97952 ; perimeter | |
| G1 X3.483 Y-2.674 E496.00128 ; perimeter | |
| G1 X3.902 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.902 Y2.795 E496.07196 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E496.40796 ; perimeter | |
| G1 X-19.820 Y-1.805 E496.47311 ; perimeter | |
| G1 X2.269 Y-1.805 E496.78599 ; perimeter | |
| G1 X2.269 Y-11.795 E496.92749 ; perimeter | |
| G1 X4.967 Y-11.795 E496.96570 ; perimeter | |
| G1 X4.967 Y-2.195 E497.10168 ; perimeter | |
| G1 X3.962 Y-2.195 E497.11592 ; perimeter | |
| G1 X3.502 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.977 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E497.76917 F600.000 ; fill | |
| G1 F2100.000 E492.76917 ; retract | |
| G1 Z4.400 F7800.000 ; lift plate during travel | |
| G1 X11.694 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.200 F7800.000 ; restore layer Z | |
| G1 E497.76917 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E497.90968 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E497.93845 ; perimeter | |
| G1 X11.694 Y1.159 E498.07895 ; perimeter | |
| G1 X11.694 Y-0.109 E498.10642 ; perimeter | |
| G1 X11.115 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E498.27198 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E498.32579 ; perimeter | |
| G1 X11.115 Y1.738 E498.49135 ; perimeter | |
| G1 X11.115 Y-0.688 E498.54386 ; perimeter | |
| G1 X10.634 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.050 Y-3.252 E498.55650 F4800.000 ; perimeter | |
| G1 X10.050 Y-10.738 E498.71855 ; perimeter | |
| G1 X10.634 Y-10.738 E498.73119 ; perimeter | |
| G1 X10.634 Y-3.312 E498.89194 ; perimeter | |
| G1 X10.537 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.471 Y-2.674 E498.91500 F4800.000 ; perimeter | |
| G1 X9.471 Y-11.316 E499.10210 ; perimeter | |
| G1 X11.212 Y-11.316 E499.13978 ; perimeter | |
| G1 X11.212 Y-1.326 E499.35604 ; perimeter | |
| G1 X19.341 Y-1.326 E499.53202 ; perimeter | |
| G1 X19.341 Y2.316 E499.61088 ; perimeter | |
| G1 X10.537 Y2.316 E499.80149 ; perimeter | |
| G1 X10.537 Y-2.614 E499.90821 ; perimeter | |
| G1 X10.058 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.993 Y-2.195 E499.92330 F1200.000 ; perimeter | |
| G1 X8.993 Y-11.795 E500.05928 ; perimeter | |
| G1 X11.691 Y-11.795 E500.09749 ; perimeter | |
| G1 X11.691 Y-1.805 E500.23899 ; perimeter | |
| G1 X19.820 Y-1.805 E500.35413 ; perimeter | |
| G1 X19.820 Y2.795 E500.41929 ; perimeter | |
| G1 X10.058 Y2.795 E500.55756 ; perimeter | |
| G1 X10.058 Y-2.135 E500.62739 ; perimeter | |
| G1 X10.058 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.983 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E500.82174 F600.000 ; fill | |
| M73 P21 ; update progress | |
| G1 F2100.000 E495.82174 ; retract | |
| G1 Z4.500 F7800.000 ; move to next layer (14) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E500.82174 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E500.82235 F600.000 ; support material | |
| G1 X18.859 Y3.974 E500.84137 ; support material | |
| G1 X18.859 Y4.016 E500.84197 ; support material | |
| G1 X20.201 Y4.016 E500.86100 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E500.87233 F600.000 ; support material | |
| G1 X18.480 Y3.595 E500.90207 ; support material | |
| G1 X18.480 Y4.395 E500.91340 ; support material | |
| G1 X20.580 Y4.395 E500.94315 ; support material | |
| G1 F2100.000 E495.94315 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E500.94315 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E500.95335 F600.000 ; support material | |
| G1 X20.013 Y10.899 E500.98378 ; support material | |
| G1 X17.705 Y10.831 E501.01649 ; support material | |
| G1 X16.294 Y13.116 E501.05453 ; support material | |
| G1 X21.141 Y13.116 E501.12320 ; support material | |
| G1 X21.141 Y12.595 E501.13059 ; support material | |
| G1 X20.335 Y11.098 E501.15467 ; support material | |
| G1 X21.141 Y9.792 E501.17641 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E501.22132 F600.000 ; support material | |
| G1 X12.099 Y10.855 E501.25346 ; support material | |
| G1 X13.195 Y12.888 E501.28618 ; support material | |
| G1 X13.054 Y13.116 E501.28998 ; support material | |
| G1 X13.498 Y13.116 E501.29628 ; support material | |
| G1 X13.517 Y13.087 E501.29677 ; support material | |
| G1 X14.519 Y13.116 E501.31098 ; support material | |
| G1 X15.849 Y13.116 E501.32981 ; support material | |
| G1 X17.383 Y10.632 E501.37117 ; support material | |
| G1 X16.462 Y8.924 E501.39865 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E501.46224 F600.000 ; support material | |
| G1 X9.147 Y10.389 E501.48582 ; support material | |
| G1 X7.589 Y12.912 E501.52782 ; support material | |
| G1 X5.281 Y12.844 E501.56053 ; support material | |
| G1 X5.112 Y13.116 E501.56506 ; support material | |
| G1 X7.914 Y13.116 E501.60475 ; support material | |
| G1 X9.469 Y10.588 E501.64679 ; support material | |
| G1 X11.777 Y10.656 E501.67950 ; support material | |
| G1 X12.847 Y8.924 E501.70834 ; support material | |
| G1 F2100.000 E496.70834 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E501.70834 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E501.71967 F600.000 ; support material | |
| G1 X9.236 Y3.595 E501.73870 ; support material | |
| G1 X8.851 Y4.395 E501.75128 ; support material | |
| G1 X10.580 Y4.395 E501.77577 ; support material | |
| G1 F2100.000 E496.77577 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E501.77577 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E501.78207 F600.000 ; support material | |
| G1 X3.541 Y10.413 E501.80686 ; support material | |
| G1 X1.233 Y10.345 E501.83957 ; support material | |
| G1 X-0.325 Y12.868 E501.88157 ; support material | |
| G1 X-0.191 Y13.116 E501.88557 ; support material | |
| G1 X4.668 Y13.116 E501.95438 ; support material | |
| G1 X4.959 Y12.645 E501.96223 ; support material | |
| G1 X3.863 Y10.612 E501.99494 ; support material | |
| G1 X4.906 Y8.924 E502.02304 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E502.03489 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E502.14649 ; support material | |
| G1 X-5.270 Y8.545 E502.15716 ; support material | |
| G1 X-21.520 Y8.545 E502.38732 ; support material | |
| G1 X-21.520 Y13.495 E502.45744 ; support material | |
| G1 X21.520 Y13.495 E503.06706 ; support material | |
| G1 X21.520 Y8.545 E503.13717 ; support material | |
| G1 X2.246 Y8.545 E503.41017 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E503.44195 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E503.48249 ; support material | |
| G1 X-4.372 Y10.369 E503.51909 ; support material | |
| G1 X-3.277 Y12.402 E503.55180 ; support material | |
| G1 X-3.718 Y13.116 E503.56369 ; support material | |
| G1 X-3.273 Y13.116 E503.56999 ; support material | |
| G1 X-2.955 Y12.601 E503.57857 ; support material | |
| G1 X-0.647 Y12.669 E503.61128 ; support material | |
| G1 X0.911 Y10.146 E503.65328 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E503.68657 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E503.70685 ; support material | |
| G1 X-4.891 Y8.924 E503.71752 ; support material | |
| G1 X-7.853 Y8.924 E503.75946 ; support material | |
| G1 X-7.325 Y9.903 E503.77522 ; support material | |
| G1 X-8.883 Y12.426 E503.81722 ; support material | |
| G1 X-11.191 Y12.358 E503.84993 ; support material | |
| G1 X-11.659 Y13.116 E503.86255 ; support material | |
| G1 X-8.296 Y13.116 E503.91019 ; support material | |
| G1 X-8.561 Y12.625 E503.91810 ; support material | |
| G1 X-7.003 Y10.102 E503.96010 ; support material | |
| G1 X-4.695 Y10.170 E503.99281 ; support material | |
| G1 F2100.000 E498.99281 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E503.99281 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E504.00414 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E504.03389 ; support material | |
| G1 X-11.520 Y4.395 E504.04522 ; support material | |
| G1 X-9.420 Y4.395 E504.07496 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E504.07557 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E504.09459 ; support material | |
| G1 X-11.141 Y4.016 E504.09520 ; support material | |
| G1 X-9.799 Y4.016 E504.11422 ; support material | |
| G1 F2100.000 E499.11422 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E504.11422 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E504.13424 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E504.14054 ; support material | |
| G1 X-12.930 Y9.927 E504.15724 ; support material | |
| G1 X-15.239 Y9.859 E504.18995 ; support material | |
| G1 X-16.796 Y12.382 E504.23195 ; support material | |
| G1 X-16.401 Y13.116 E504.24377 ; support material | |
| G1 X-12.104 Y13.116 E504.30462 ; support material | |
| G1 X-11.513 Y12.159 E504.32056 ; support material | |
| G1 X-12.608 Y10.126 E504.35327 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E504.36512 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E504.42594 ; support material | |
| G1 X-20.844 Y9.883 E504.44191 ; support material | |
| G1 X-19.749 Y11.916 E504.47462 ; support material | |
| G1 X-20.490 Y13.116 E504.49461 ; support material | |
| G1 X-20.045 Y13.116 E504.50091 ; support material | |
| G1 X-19.427 Y12.115 E504.51758 ; support material | |
| G1 X-17.119 Y12.183 E504.55029 ; support material | |
| G1 X-15.561 Y9.660 E504.59229 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E504.60427 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E504.61057 ; support material | |
| G1 X-21.141 Y9.644 E504.62077 ; support material | |
| G1 F2100.000 E499.62077 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E504.62077 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E504.62707 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E504.62779 ; support material | |
| G1 X-20.018 Y4.016 E504.63409 ; support material | |
| G1 X-19.991 Y3.974 E504.63480 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E504.65322 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E504.66596 ; support material | |
| G1 X-21.520 Y4.395 E504.69571 ; support material | |
| G1 X-19.420 Y4.395 E504.72545 ; support material | |
| G1 X-19.420 Y3.595 E504.73678 ; support material | |
| G1 X-20.620 Y3.595 E504.75378 ; support material | |
| M126 ; enable fan | |
| M73 P22 ; update progress | |
| G1 F2100.000 E499.75378 ; retract | |
| G1 Z4.500 F7800.000 ; move to next layer (40) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E504.75378 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E504.78254 F2007.881 ; perimeter | |
| G1 X2.240 Y-0.169 E505.22467 ; perimeter | |
| G1 X2.240 Y1.159 E505.25344 ; perimeter | |
| G1 X-18.124 Y1.159 E505.69427 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E505.74808 F2007.881 ; perimeter | |
| G1 X2.818 Y-0.748 E506.21526 ; perimeter | |
| G1 X2.818 Y1.738 E506.26907 ; perimeter | |
| G1 X-18.703 Y1.738 E506.73495 ; perimeter | |
| G1 F2100.000 E501.73495 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X3.316 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E506.73495 F2100.000 ; compensate retraction | |
| G1 X3.316 Y-10.738 E506.89700 F2007.881 ; perimeter | |
| G1 X3.869 Y-10.738 E506.90897 ; perimeter | |
| G1 X3.869 Y-3.252 E507.07102 ; perimeter | |
| G1 X3.376 Y-3.252 E507.08169 ; perimeter | |
| G1 X3.397 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.397 Y2.316 E507.18971 F2007.881 ; perimeter | |
| G1 X-19.341 Y2.316 E507.68193 ; perimeter | |
| G1 X-19.341 Y-1.326 E507.76079 ; perimeter | |
| G1 X2.737 Y-1.326 E508.23875 ; perimeter | |
| G1 X2.737 Y-11.316 E508.45501 ; perimeter | |
| G1 X4.447 Y-11.316 E508.49202 ; perimeter | |
| G1 X4.447 Y-2.674 E508.67912 ; perimeter | |
| G1 X3.457 Y-2.674 E508.70057 ; perimeter | |
| G1 X3.875 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.875 Y2.795 E508.77125 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E509.10687 ; perimeter | |
| G1 X-19.820 Y-1.805 E509.17202 ; perimeter | |
| G1 X2.259 Y-1.805 E509.48475 ; perimeter | |
| G1 X2.259 Y-11.795 E509.62625 ; perimeter | |
| G1 X4.926 Y-11.795 E509.66403 ; perimeter | |
| G1 X4.926 Y-2.195 E509.80000 ; perimeter | |
| G1 X3.935 Y-2.195 E509.81403 ; perimeter | |
| G1 X3.475 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.950 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E510.46641 F600.000 ; fill | |
| G1 F2100.000 E505.46641 ; retract | |
| G1 Z4.500 F7800.000 ; lift plate during travel | |
| G1 X11.720 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.300 F7800.000 ; restore layer Z | |
| G1 E510.46641 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E510.60634 F2007.881 ; perimeter | |
| G1 X18.184 Y1.159 E510.63510 ; perimeter | |
| G1 X11.720 Y1.159 E510.77503 ; perimeter | |
| G1 X11.720 Y-0.109 E510.80250 ; perimeter | |
| G1 X11.142 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E510.96747 F2007.881 ; perimeter | |
| G1 X18.763 Y1.738 E511.02128 ; perimeter | |
| G1 X11.142 Y1.738 E511.18626 ; perimeter | |
| G1 X11.142 Y-0.688 E511.23877 ; perimeter | |
| G1 X10.644 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.091 Y-3.252 E511.25074 F2007.881 ; perimeter | |
| G1 X10.091 Y-10.738 E511.41279 ; perimeter | |
| G1 X10.644 Y-10.738 E511.42476 ; perimeter | |
| G1 X10.644 Y-3.312 E511.58551 ; perimeter | |
| G1 X10.563 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.513 Y-2.674 E511.60826 F2007.881 ; perimeter | |
| G1 X9.513 Y-11.316 E511.79536 ; perimeter | |
| G1 X11.223 Y-11.316 E511.83237 ; perimeter | |
| G1 X11.223 Y-1.326 E512.04863 ; perimeter | |
| G1 X19.341 Y-1.326 E512.22439 ; perimeter | |
| G1 X19.341 Y2.316 E512.30325 ; perimeter | |
| G1 X10.563 Y2.316 E512.49327 ; perimeter | |
| G1 X10.563 Y-2.614 E512.59999 ; perimeter | |
| G1 X10.085 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.034 Y-2.195 E512.61488 F600.000 ; perimeter | |
| G1 X9.034 Y-11.795 E512.75085 ; perimeter | |
| G1 X11.701 Y-11.795 E512.78863 ; perimeter | |
| G1 X11.701 Y-1.805 E512.93013 ; perimeter | |
| G1 X19.820 Y-1.805 E513.04512 ; perimeter | |
| G1 X19.820 Y2.795 E513.11028 ; perimeter | |
| G1 X10.085 Y2.795 E513.24817 ; perimeter | |
| G1 X10.085 Y-2.135 E513.31800 ; perimeter | |
| G1 X10.085 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.010 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E513.51147 F600.000 ; fill | |
| M73 P22 ; update progress | |
| G1 F2100.000 E508.51147 ; retract | |
| G1 Z4.600 F7800.000 ; move to next layer (41) and lift | |
| G1 X2.213 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.400 F7800.000 ; restore layer Z | |
| G1 E513.51147 F2100.000 ; compensate retraction | |
| G1 X2.213 Y1.159 E513.54023 F2004.690 ; perimeter | |
| G1 X-18.184 Y1.159 E513.98178 ; perimeter | |
| G1 X-18.184 Y-0.169 E514.01054 ; perimeter | |
| G1 X2.153 Y-0.169 E514.45079 ; perimeter | |
| G1 X2.791 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.791 Y1.738 E514.50461 F2004.690 ; perimeter | |
| G1 X-18.763 Y1.738 E514.97120 ; perimeter | |
| G1 X-18.763 Y-0.748 E515.02502 ; perimeter | |
| G1 X2.731 Y-0.748 E515.49031 ; perimeter | |
| G1 X3.305 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.305 Y-10.738 E515.65237 F2004.690 ; perimeter | |
| G1 X3.827 Y-10.738 E515.66366 ; perimeter | |
| G1 X3.827 Y-3.252 E515.82571 ; perimeter | |
| G1 X3.365 Y-3.252 E515.83572 ; perimeter | |
| G1 X3.370 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.370 Y2.316 E515.94374 F2004.690 ; perimeter | |
| G1 X-19.341 Y2.316 E516.43538 ; perimeter | |
| G1 X-19.341 Y-1.326 E516.51424 ; perimeter | |
| G1 X2.727 Y-1.326 E516.99197 ; perimeter | |
| G1 X2.727 Y-11.316 E517.20823 ; perimeter | |
| G1 X4.406 Y-11.316 E517.24458 ; perimeter | |
| G1 X4.406 Y-2.674 E517.43167 ; perimeter | |
| G1 X3.430 Y-2.674 E517.45280 ; perimeter | |
| G1 X3.848 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.848 Y2.795 E517.52348 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E517.85872 ; perimeter | |
| G1 X-19.820 Y-1.805 E517.92388 ; perimeter | |
| G1 X2.248 Y-1.805 E518.23646 ; perimeter | |
| G1 X2.248 Y-11.795 E518.37795 ; perimeter | |
| G1 X4.884 Y-11.795 E518.41529 ; perimeter | |
| G1 X4.884 Y-2.195 E518.55127 ; perimeter | |
| G1 X3.908 Y-2.195 E518.56509 ; perimeter | |
| G1 X3.448 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.923 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E519.21659 F600.000 ; fill | |
| G1 F2100.000 E514.21659 ; retract | |
| G1 Z4.600 F7800.000 ; lift plate during travel | |
| G1 X11.747 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.400 F7800.000 ; restore layer Z | |
| G1 E519.21659 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E519.35594 F2004.690 ; perimeter | |
| G1 X18.184 Y1.159 E519.38470 ; perimeter | |
| G1 X11.747 Y1.159 E519.52405 ; perimeter | |
| G1 X11.747 Y-0.109 E519.55151 ; perimeter | |
| G1 X11.169 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E519.71591 F2004.690 ; perimeter | |
| G1 X18.763 Y1.738 E519.76972 ; perimeter | |
| G1 X11.169 Y1.738 E519.93412 ; perimeter | |
| G1 X11.169 Y-0.688 E519.98663 ; perimeter | |
| G1 X10.655 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.133 Y-3.252 E519.99793 F2004.690 ; perimeter | |
| G1 X10.133 Y-10.738 E520.15998 ; perimeter | |
| G1 X10.655 Y-10.738 E520.17128 ; perimeter | |
| G1 X10.655 Y-3.312 E520.33203 ; perimeter | |
| G1 X10.590 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.554 Y-2.674 E520.35446 F2004.690 ; perimeter | |
| G1 X9.554 Y-11.316 E520.54156 ; perimeter | |
| G1 X11.233 Y-11.316 E520.57791 ; perimeter | |
| G1 X11.233 Y-1.326 E520.79417 ; perimeter | |
| G1 X19.341 Y-1.326 E520.96969 ; perimeter | |
| G1 X19.341 Y2.316 E521.04856 ; perimeter | |
| G1 X10.590 Y2.316 E521.23800 ; perimeter | |
| G1 X10.590 Y-2.614 E521.34472 ; perimeter | |
| G1 X10.112 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.076 Y-2.195 E521.35940 F600.000 ; perimeter | |
| G1 X9.076 Y-11.795 E521.49537 ; perimeter | |
| G1 X11.712 Y-11.795 E521.53271 ; perimeter | |
| G1 X11.712 Y-1.805 E521.67421 ; perimeter | |
| G1 X19.820 Y-1.805 E521.78906 ; perimeter | |
| G1 X19.820 Y2.795 E521.85421 ; perimeter | |
| G1 X10.112 Y2.795 E521.99172 ; perimeter | |
| G1 X10.112 Y-2.135 E522.06155 ; perimeter | |
| G1 X10.112 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.037 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E522.25414 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P22 ; update progress | |
| G1 F2100.000 E517.25414 ; retract | |
| G1 Z4.700 F7800.000 ; move to next layer (42) and lift | |
| G1 X2.186 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.500 F7800.000 ; restore layer Z | |
| G1 E522.25414 F2100.000 ; compensate retraction | |
| G1 X2.186 Y1.159 E522.28290 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E522.72387 ; perimeter | |
| G1 X-18.184 Y-0.169 E522.75264 ; perimeter | |
| G1 X2.126 Y-0.169 E523.19231 ; perimeter | |
| G1 X2.764 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.764 Y1.738 E523.24612 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E523.71214 ; perimeter | |
| G1 X-18.763 Y-0.748 E523.76595 ; perimeter | |
| G1 X2.704 Y-0.748 E524.23067 ; perimeter | |
| G1 X3.295 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.295 Y-10.738 E524.39272 F4800.000 ; perimeter | |
| G1 X3.786 Y-10.738 E524.40335 ; perimeter | |
| G1 X3.786 Y-3.252 E524.56540 ; perimeter | |
| G1 X3.355 Y-3.252 E524.57473 ; perimeter | |
| G1 X3.343 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.343 Y2.316 E524.68275 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E525.17382 ; perimeter | |
| G1 X-19.341 Y-1.326 E525.25268 ; perimeter | |
| G1 X2.716 Y-1.326 E525.73018 ; perimeter | |
| G1 X2.716 Y-11.316 E525.94644 ; perimeter | |
| G1 X4.364 Y-11.316 E525.98211 ; perimeter | |
| G1 X4.364 Y-2.674 E526.16921 ; perimeter | |
| G1 X3.403 Y-2.674 E526.19003 ; perimeter | |
| G1 X3.822 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.822 Y2.795 E526.26070 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E526.59556 ; perimeter | |
| G1 X-19.820 Y-1.805 E526.66072 ; perimeter | |
| G1 X2.238 Y-1.805 E526.97315 ; perimeter | |
| G1 X2.238 Y-11.795 E527.11465 ; perimeter | |
| G1 X4.843 Y-11.795 E527.15155 ; perimeter | |
| G1 X4.843 Y-2.195 E527.28752 ; perimeter | |
| G1 X3.882 Y-2.195 E527.30114 ; perimeter | |
| G1 X3.422 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.897 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E527.95175 F600.000 ; fill | |
| G1 F2100.000 E522.95175 ; retract | |
| G1 Z4.700 F7800.000 ; lift plate during travel | |
| G1 X11.774 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.500 F7800.000 ; restore layer Z | |
| G1 E527.95175 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E528.09052 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E528.11929 ; perimeter | |
| G1 X11.774 Y1.159 E528.25806 ; perimeter | |
| G1 X11.774 Y-0.109 E528.28552 ; perimeter | |
| G1 X11.196 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E528.44934 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E528.50315 ; perimeter | |
| G1 X11.196 Y1.738 E528.66697 ; perimeter | |
| G1 X11.196 Y-0.688 E528.71948 ; perimeter | |
| G1 X10.665 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.174 Y-3.252 E528.73011 F4800.000 ; perimeter | |
| G1 X10.174 Y-10.738 E528.89216 ; perimeter | |
| G1 X10.665 Y-10.738 E528.90279 ; perimeter | |
| G1 X10.665 Y-3.312 E529.06354 ; perimeter | |
| G1 X10.617 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.596 Y-2.674 E529.08566 F4800.000 ; perimeter | |
| G1 X9.596 Y-11.316 E529.27275 ; perimeter | |
| G1 X11.244 Y-11.316 E529.30843 ; perimeter | |
| G1 X11.244 Y-1.326 E529.52469 ; perimeter | |
| G1 X19.341 Y-1.326 E529.69999 ; perimeter | |
| G1 X19.341 Y2.316 E529.77885 ; perimeter | |
| G1 X10.617 Y2.316 E529.96771 ; perimeter | |
| G1 X10.617 Y-2.614 E530.07444 ; perimeter | |
| G1 X10.138 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.117 Y-2.195 E530.08891 F1200.000 ; perimeter | |
| G1 X9.117 Y-11.795 E530.22488 ; perimeter | |
| G1 X11.722 Y-11.795 E530.26178 ; perimeter | |
| G1 X11.722 Y-1.805 E530.40328 ; perimeter | |
| G1 X19.820 Y-1.805 E530.51798 ; perimeter | |
| G1 X19.820 Y2.795 E530.58313 ; perimeter | |
| G1 X10.138 Y2.795 E530.72026 ; perimeter | |
| G1 X10.138 Y-2.135 E530.79009 ; perimeter | |
| G1 X10.138 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.063 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E530.98180 F600.000 ; fill | |
| M73 P23 ; update progress | |
| G1 F2100.000 E525.98180 ; retract | |
| G1 Z4.800 F7800.000 ; move to next layer (15) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E530.98180 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E530.98241 F600.000 ; support material | |
| G1 X18.859 Y3.974 E531.00143 ; support material | |
| G1 X18.859 Y4.016 E531.00204 ; support material | |
| G1 X20.201 Y4.016 E531.02106 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E531.03239 F600.000 ; support material | |
| G1 X18.480 Y3.595 E531.06213 ; support material | |
| G1 X18.480 Y4.395 E531.07347 ; support material | |
| G1 X20.580 Y4.395 E531.10321 ; support material | |
| G1 F2100.000 E526.10321 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E531.10321 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E531.11342 F600.000 ; support material | |
| G1 X20.013 Y10.899 E531.14384 ; support material | |
| G1 X17.705 Y10.831 E531.17655 ; support material | |
| G1 X16.294 Y13.116 E531.21460 ; support material | |
| G1 X21.141 Y13.116 E531.28326 ; support material | |
| G1 X21.141 Y12.595 E531.29065 ; support material | |
| G1 X20.335 Y11.098 E531.31473 ; support material | |
| G1 X21.141 Y9.792 E531.33647 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E531.38138 F600.000 ; support material | |
| G1 X12.099 Y10.855 E531.41353 ; support material | |
| G1 X13.195 Y12.888 E531.44624 ; support material | |
| G1 X13.054 Y13.116 E531.45004 ; support material | |
| G1 X13.498 Y13.116 E531.45634 ; support material | |
| G1 X13.517 Y13.087 E531.45683 ; support material | |
| G1 X14.519 Y13.116 E531.47104 ; support material | |
| G1 X15.849 Y13.116 E531.48987 ; support material | |
| G1 X17.383 Y10.632 E531.53123 ; support material | |
| G1 X16.462 Y8.924 E531.55872 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E531.62231 F600.000 ; support material | |
| G1 X9.147 Y10.389 E531.64588 ; support material | |
| G1 X7.589 Y12.912 E531.68788 ; support material | |
| G1 X5.281 Y12.844 E531.72059 ; support material | |
| G1 X5.112 Y13.116 E531.72513 ; support material | |
| G1 X7.914 Y13.116 E531.76481 ; support material | |
| G1 X9.469 Y10.588 E531.80685 ; support material | |
| G1 X11.777 Y10.656 E531.83956 ; support material | |
| G1 X12.847 Y8.924 E531.86840 ; support material | |
| G1 F2100.000 E526.86840 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E531.86840 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E531.87973 F600.000 ; support material | |
| G1 X9.236 Y3.595 E531.89876 ; support material | |
| G1 X8.851 Y4.395 E531.91134 ; support material | |
| G1 X10.580 Y4.395 E531.93583 ; support material | |
| G1 F2100.000 E526.93583 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E531.93583 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E531.94213 F600.000 ; support material | |
| G1 X3.541 Y10.413 E531.96692 ; support material | |
| G1 X1.233 Y10.345 E531.99963 ; support material | |
| G1 X-0.325 Y12.868 E532.04163 ; support material | |
| G1 X-0.191 Y13.116 E532.04563 ; support material | |
| G1 X4.668 Y13.116 E532.11444 ; support material | |
| G1 X4.959 Y12.645 E532.12229 ; support material | |
| G1 X3.863 Y10.612 E532.15500 ; support material | |
| G1 X4.906 Y8.924 E532.18311 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E532.19495 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E532.30655 ; support material | |
| G1 X-5.270 Y8.545 E532.31722 ; support material | |
| G1 X-21.520 Y8.545 E532.54739 ; support material | |
| G1 X-21.520 Y13.495 E532.61750 ; support material | |
| G1 X21.520 Y13.495 E533.22712 ; support material | |
| G1 X21.520 Y8.545 E533.29723 ; support material | |
| G1 X2.246 Y8.545 E533.57023 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E533.60202 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E533.64255 ; support material | |
| G1 X-4.372 Y10.369 E533.67915 ; support material | |
| G1 X-3.277 Y12.402 E533.71186 ; support material | |
| G1 X-3.718 Y13.116 E533.72375 ; support material | |
| G1 X-3.273 Y13.116 E533.73005 ; support material | |
| G1 X-2.955 Y12.601 E533.73863 ; support material | |
| G1 X-0.647 Y12.669 E533.77134 ; support material | |
| G1 X0.911 Y10.146 E533.81334 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E533.84663 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E533.86691 ; support material | |
| G1 X-4.891 Y8.924 E533.87758 ; support material | |
| G1 X-7.853 Y8.924 E533.91952 ; support material | |
| G1 X-7.325 Y9.903 E533.93528 ; support material | |
| G1 X-8.883 Y12.426 E533.97728 ; support material | |
| G1 X-11.191 Y12.358 E534.00999 ; support material | |
| G1 X-11.659 Y13.116 E534.02262 ; support material | |
| G1 X-8.296 Y13.116 E534.07026 ; support material | |
| G1 X-8.561 Y12.625 E534.07817 ; support material | |
| G1 X-7.003 Y10.102 E534.12016 ; support material | |
| G1 X-4.695 Y10.170 E534.15287 ; support material | |
| G1 F2100.000 E529.15287 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E534.15287 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E534.16421 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E534.19395 ; support material | |
| G1 X-11.520 Y4.395 E534.20528 ; support material | |
| G1 X-9.420 Y4.395 E534.23503 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E534.23563 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E534.25465 ; support material | |
| G1 X-11.141 Y4.016 E534.25526 ; support material | |
| G1 X-9.799 Y4.016 E534.27428 ; support material | |
| G1 F2100.000 E529.27428 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E534.27428 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E534.29430 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E534.30060 ; support material | |
| G1 X-12.930 Y9.927 E534.31730 ; support material | |
| G1 X-15.239 Y9.859 E534.35001 ; support material | |
| G1 X-16.796 Y12.382 E534.39201 ; support material | |
| G1 X-16.401 Y13.116 E534.40383 ; support material | |
| G1 X-12.104 Y13.116 E534.46469 ; support material | |
| G1 X-11.513 Y12.159 E534.48062 ; support material | |
| G1 X-12.608 Y10.126 E534.51333 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E534.52518 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E534.58601 ; support material | |
| G1 X-20.844 Y9.883 E534.60198 ; support material | |
| G1 X-19.749 Y11.916 E534.63469 ; support material | |
| G1 X-20.490 Y13.116 E534.65467 ; support material | |
| G1 X-20.045 Y13.116 E534.66097 ; support material | |
| G1 X-19.427 Y12.115 E534.67764 ; support material | |
| G1 X-17.119 Y12.183 E534.71035 ; support material | |
| G1 X-15.561 Y9.660 E534.75235 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E534.76434 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E534.77063 ; support material | |
| G1 X-21.141 Y9.644 E534.78083 ; support material | |
| G1 F2100.000 E529.78083 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E534.78083 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E534.78713 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E534.78785 ; support material | |
| G1 X-20.018 Y4.016 E534.79415 ; support material | |
| G1 X-19.991 Y3.974 E534.79486 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E534.81328 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E534.82603 ; support material | |
| G1 X-21.520 Y4.395 E534.85577 ; support material | |
| G1 X-19.420 Y4.395 E534.88551 ; support material | |
| G1 X-19.420 Y3.595 E534.89685 ; support material | |
| G1 X-20.620 Y3.595 E534.91384 ; support material | |
| M126 ; enable fan | |
| M73 P23 ; update progress | |
| G1 F2100.000 E529.91384 ; retract | |
| G1 Z4.800 F7800.000 ; move to next layer (43) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E534.91384 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E534.94261 F2193.042 ; perimeter | |
| G1 X2.159 Y-0.169 E535.38300 ; perimeter | |
| G1 X2.159 Y1.159 E535.41176 ; perimeter | |
| G1 X-18.124 Y1.159 E535.85085 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E535.90466 F2193.042 ; perimeter | |
| G1 X2.738 Y-0.748 E536.37010 ; perimeter | |
| G1 X2.738 Y1.738 E536.42391 ; perimeter | |
| G1 X-18.703 Y1.738 E536.88805 ; perimeter | |
| G1 X2.706 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.706 Y-11.316 E537.10431 F2193.042 ; perimeter | |
| G1 X4.323 Y-11.316 E537.13932 ; perimeter | |
| G1 X4.323 Y-2.674 E537.32642 ; perimeter | |
| G1 X3.316 Y-2.674 E537.34821 ; perimeter | |
| G1 X3.316 Y2.316 E537.45623 ; perimeter | |
| G1 X-19.341 Y2.316 E537.94672 ; perimeter | |
| G1 X-19.341 Y-1.326 E538.02558 ; perimeter | |
| G1 X2.646 Y-1.326 E538.50155 ; perimeter | |
| G1 X2.227 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.227 Y-11.795 E538.64305 F600.000 ; perimeter | |
| G1 X4.802 Y-11.795 E538.67951 ; perimeter | |
| G1 X4.802 Y-2.195 E538.81549 ; perimeter | |
| G1 X3.795 Y-2.195 E538.82975 ; perimeter | |
| G1 X3.795 Y2.795 E538.90043 ; perimeter | |
| G1 X-19.820 Y2.795 E539.23491 ; perimeter | |
| G1 X-19.820 Y-1.805 E539.30007 ; perimeter | |
| G1 X2.167 Y-1.805 E539.61150 ; perimeter | |
| G1 X2.627 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.870 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E540.26123 F600.000 ; fill | |
| G1 F2100.000 E535.26123 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X3.514 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E540.26123 F2100.000 ; compensate retraction | |
| G1 X3.514 Y-11.027 E540.52633 F600.000 ; fill | |
| G1 F2100.000 E535.52633 ; retract | |
| G1 Z4.800 F7800.000 ; lift plate during travel | |
| G1 X11.801 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.600 F7800.000 ; restore layer Z | |
| G1 E540.52633 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E540.66452 F2193.042 ; perimeter | |
| G1 X18.184 Y1.159 E540.69328 ; perimeter | |
| G1 X11.801 Y1.159 E540.83147 ; perimeter | |
| G1 X11.801 Y-0.109 E540.85893 ; perimeter | |
| G1 X11.222 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E541.02217 F2193.042 ; perimeter | |
| G1 X18.763 Y1.738 E541.07598 ; perimeter | |
| G1 X11.222 Y1.738 E541.23922 ; perimeter | |
| G1 X11.222 Y-0.688 E541.29173 ; perimeter | |
| G1 X11.254 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E541.46680 F2193.042 ; perimeter | |
| G1 X19.341 Y2.316 E541.54566 ; perimeter | |
| G1 X10.644 Y2.316 E541.73395 ; perimeter | |
| G1 X10.644 Y-2.674 E541.84197 ; perimeter | |
| G1 X9.637 Y-2.674 E541.86377 ; perimeter | |
| G1 X9.637 Y-11.316 E542.05086 ; perimeter | |
| G1 X11.254 Y-11.316 E542.08587 ; perimeter | |
| G1 X11.254 Y-1.386 E542.30083 ; perimeter | |
| G1 X11.733 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E542.41538 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E542.48054 ; perimeter | |
| G1 X10.165 Y2.795 E542.61729 ; perimeter | |
| G1 X10.165 Y-2.195 E542.68797 ; perimeter | |
| G1 X9.158 Y-2.195 E542.70223 ; perimeter | |
| G1 X9.158 Y-11.795 E542.83820 ; perimeter | |
| G1 X11.733 Y-11.795 E542.87467 ; perimeter | |
| G1 X11.733 Y-1.865 E543.01532 ; perimeter | |
| G1 X11.733 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.446 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.446 Y-11.027 E543.28042 F600.000 ; fill | |
| G1 X12.090 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E543.47124 F600.000 ; fill | |
| M73 P24 ; update progress | |
| G1 F2100.000 E538.47124 ; retract | |
| G1 Z4.900 F7800.000 ; move to next layer (44) and lift | |
| G1 X2.132 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.700 F7800.000 ; restore layer Z | |
| G1 E543.47124 F2100.000 ; compensate retraction | |
| G1 X2.132 Y1.159 E543.50001 F2190.098 ; perimeter | |
| G1 X-18.184 Y1.159 E543.93982 ; perimeter | |
| G1 X-18.184 Y-0.169 E543.96858 ; perimeter | |
| G1 X2.072 Y-0.169 E544.40709 ; perimeter | |
| G1 X2.711 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.711 Y1.738 E544.46090 F2190.098 ; perimeter | |
| G1 X-18.763 Y1.738 E544.92576 ; perimeter | |
| G1 X-18.763 Y-0.748 E544.97957 ; perimeter | |
| G1 X2.651 Y-0.748 E545.44313 ; perimeter | |
| G1 X2.695 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.695 Y-11.316 E545.65939 F2190.098 ; perimeter | |
| G1 X4.282 Y-11.316 E545.69373 ; perimeter | |
| G1 X4.282 Y-2.674 E545.88083 ; perimeter | |
| G1 X3.289 Y-2.674 E545.90231 ; perimeter | |
| G1 X3.289 Y2.316 E546.01033 ; perimeter | |
| G1 X-19.341 Y2.316 E546.50023 ; perimeter | |
| G1 X-19.341 Y-1.326 E546.57909 ; perimeter | |
| G1 X2.635 Y-1.326 E547.05484 ; perimeter | |
| G1 X2.217 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.217 Y-11.795 E547.19634 F600.000 ; perimeter | |
| G1 X4.760 Y-11.795 E547.23236 ; perimeter | |
| G1 X4.760 Y-2.195 E547.36834 ; perimeter | |
| G1 X3.768 Y-2.195 E547.38239 ; perimeter | |
| G1 X3.768 Y2.795 E547.45307 ; perimeter | |
| G1 X-19.820 Y2.795 E547.78717 ; perimeter | |
| G1 X-19.820 Y-1.805 E547.85233 ; perimeter | |
| G1 X2.157 Y-1.805 E548.16361 ; perimeter | |
| G1 X2.617 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.843 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E548.81246 F600.000 ; fill | |
| G1 F2100.000 E543.81246 ; retract | |
| G1 Z4.900 F7800.000 ; lift plate during travel | |
| G1 X3.488 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z4.700 F7800.000 ; restore layer Z | |
| G1 E548.81246 F2100.000 ; compensate retraction | |
| G1 X3.488 Y-11.027 E549.07756 F600.000 ; fill | |
| G1 F2100.000 E544.07756 ; retract | |
| G1 Z4.900 F7800.000 ; lift plate during travel | |
| G1 X11.828 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.700 F7800.000 ; restore layer Z | |
| G1 E549.07756 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E549.21517 F2190.098 ; perimeter | |
| G1 X18.184 Y1.159 E549.24393 ; perimeter | |
| G1 X11.828 Y1.159 E549.38154 ; perimeter | |
| G1 X11.828 Y-0.109 E549.40901 ; perimeter | |
| G1 X11.249 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E549.57166 F2190.098 ; perimeter | |
| G1 X18.763 Y1.738 E549.62547 ; perimeter | |
| G1 X11.249 Y1.738 E549.78813 ; perimeter | |
| G1 X11.249 Y-0.688 E549.84064 ; perimeter | |
| G1 X11.265 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E550.01549 F2190.098 ; perimeter | |
| G1 X19.341 Y2.316 E550.09435 ; perimeter | |
| G1 X10.671 Y2.316 E550.28205 ; perimeter | |
| G1 X10.671 Y-2.674 E550.39007 ; perimeter | |
| G1 X9.678 Y-2.674 E550.41155 ; perimeter | |
| G1 X9.678 Y-11.316 E550.59865 ; perimeter | |
| G1 X11.265 Y-11.316 E550.63299 ; perimeter | |
| G1 X11.265 Y-1.386 E550.84795 ; perimeter | |
| G1 X11.743 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E550.96235 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E551.02751 ; perimeter | |
| G1 X10.192 Y2.795 E551.16388 ; perimeter | |
| G1 X10.192 Y-2.195 E551.23456 ; perimeter | |
| G1 X9.200 Y-2.195 E551.24861 ; perimeter | |
| G1 X9.200 Y-11.795 E551.38459 ; perimeter | |
| G1 X11.743 Y-11.795 E551.42061 ; perimeter | |
| G1 X11.743 Y-1.865 E551.56126 ; perimeter | |
| G1 X11.743 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.472 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.472 Y-11.027 E551.82636 F600.000 ; fill | |
| G1 X12.117 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E552.01631 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P24 ; update progress | |
| G1 F2100.000 E547.01631 ; retract | |
| G1 Z5.000 F7800.000 ; move to next layer (45) and lift | |
| G1 X2.106 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.800 F7800.000 ; restore layer Z | |
| G1 E552.01631 F2100.000 ; compensate retraction | |
| G1 X2.106 Y1.159 E552.04507 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E552.48430 ; perimeter | |
| G1 X-18.184 Y-0.169 E552.51306 ; perimeter | |
| G1 X2.046 Y-0.169 E552.95099 ; perimeter | |
| G1 X2.684 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.684 Y1.738 E553.00481 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E553.46908 ; perimeter | |
| G1 X-18.763 Y-0.748 E553.52290 ; perimeter | |
| G1 X2.624 Y-0.748 E553.98587 ; perimeter | |
| G1 X2.685 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.685 Y-11.316 E554.20213 F4800.000 ; perimeter | |
| G1 X4.240 Y-11.316 E554.23580 ; perimeter | |
| G1 X4.240 Y-2.674 E554.42290 ; perimeter | |
| G1 X3.263 Y-2.674 E554.44406 ; perimeter | |
| G1 X3.263 Y2.316 E554.55209 ; perimeter | |
| G1 X-19.341 Y2.316 E555.04141 ; perimeter | |
| G1 X-19.341 Y-1.326 E555.12027 ; perimeter | |
| G1 X2.625 Y-1.326 E555.59579 ; perimeter | |
| G1 X2.206 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.206 Y-11.795 E555.73729 F1200.000 ; perimeter | |
| G1 X4.719 Y-11.795 E555.77287 ; perimeter | |
| G1 X4.719 Y-2.195 E555.90885 ; perimeter | |
| G1 X3.741 Y-2.195 E555.92270 ; perimeter | |
| G1 X3.741 Y2.795 E555.99337 ; perimeter | |
| G1 X-19.820 Y2.795 E556.32710 ; perimeter | |
| G1 X-19.820 Y-1.805 E556.39225 ; perimeter | |
| G1 X2.146 Y-1.805 E556.70338 ; perimeter | |
| G1 X2.606 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.816 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E557.35135 F600.000 ; fill | |
| G1 F2100.000 E552.35135 ; retract | |
| G1 Z5.000 F7800.000 ; lift plate during travel | |
| G1 X3.463 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z4.800 F7800.000 ; restore layer Z | |
| G1 E557.35135 F2100.000 ; compensate retraction | |
| G1 X3.463 Y-11.027 E557.61645 F600.000 ; fill | |
| G1 F2100.000 E552.61645 ; retract | |
| G1 Z5.000 F7800.000 ; lift plate during travel | |
| G1 X11.854 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.800 F7800.000 ; restore layer Z | |
| G1 E557.61645 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E557.75348 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E557.78225 ; perimeter | |
| G1 X11.854 Y1.159 E557.91928 ; perimeter | |
| G1 X11.854 Y-0.109 E557.94674 ; perimeter | |
| G1 X11.276 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E558.10882 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E558.16263 ; perimeter | |
| G1 X11.276 Y1.738 E558.32471 ; perimeter | |
| G1 X11.276 Y-0.688 E558.37722 ; perimeter | |
| G1 X11.275 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E558.55184 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E558.63070 ; perimeter | |
| G1 X10.697 Y2.316 E558.81782 ; perimeter | |
| G1 X10.697 Y-2.674 E558.92584 ; perimeter | |
| G1 X9.720 Y-2.674 E558.94700 ; perimeter | |
| G1 X9.720 Y-11.316 E559.13410 ; perimeter | |
| G1 X11.275 Y-11.316 E559.16777 ; perimeter | |
| G1 X11.275 Y-1.386 E559.38273 ; perimeter | |
| G1 X11.754 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E559.49699 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E559.56214 ; perimeter | |
| G1 X10.219 Y2.795 E559.69813 ; perimeter | |
| G1 X10.219 Y-2.195 E559.76881 ; perimeter | |
| G1 X9.241 Y-2.195 E559.78266 ; perimeter | |
| G1 X9.241 Y-11.795 E559.91863 ; perimeter | |
| G1 X11.754 Y-11.795 E559.95422 ; perimeter | |
| G1 X11.754 Y-1.865 E560.09487 ; perimeter | |
| G1 X11.754 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.497 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.497 Y-11.027 E560.35997 F600.000 ; fill | |
| G1 X12.144 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E560.54903 F600.000 ; fill | |
| M73 P24 ; update progress | |
| G1 F2100.000 E555.54903 ; retract | |
| G1 Z5.100 F7800.000 ; move to next layer (16) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E560.54903 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E560.54964 F600.000 ; support material | |
| G1 X18.859 Y3.974 E560.56866 ; support material | |
| G1 X18.859 Y4.016 E560.56927 ; support material | |
| G1 X20.201 Y4.016 E560.58829 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E560.59962 F600.000 ; support material | |
| G1 X18.480 Y3.595 E560.62937 ; support material | |
| G1 X18.480 Y4.395 E560.64070 ; support material | |
| G1 X20.580 Y4.395 E560.67044 ; support material | |
| G1 F2100.000 E555.67044 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E560.67044 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E560.68065 F600.000 ; support material | |
| G1 X20.013 Y10.899 E560.71107 ; support material | |
| G1 X17.705 Y10.831 E560.74378 ; support material | |
| G1 X16.294 Y13.116 E560.78183 ; support material | |
| G1 X21.141 Y13.116 E560.85049 ; support material | |
| G1 X21.141 Y12.595 E560.85789 ; support material | |
| G1 X20.335 Y11.098 E560.88196 ; support material | |
| G1 X21.141 Y9.792 E560.90370 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E560.94861 F600.000 ; support material | |
| G1 X12.099 Y10.855 E560.98076 ; support material | |
| G1 X13.195 Y12.888 E561.01347 ; support material | |
| G1 X13.054 Y13.116 E561.01727 ; support material | |
| G1 X13.498 Y13.116 E561.02357 ; support material | |
| G1 X13.517 Y13.087 E561.02407 ; support material | |
| G1 X14.519 Y13.116 E561.03827 ; support material | |
| G1 X15.849 Y13.116 E561.05711 ; support material | |
| G1 X17.383 Y10.632 E561.09846 ; support material | |
| G1 X16.462 Y8.924 E561.12595 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E561.18954 F600.000 ; support material | |
| G1 X9.147 Y10.389 E561.21312 ; support material | |
| G1 X7.589 Y12.912 E561.25511 ; support material | |
| G1 X5.281 Y12.844 E561.28782 ; support material | |
| G1 X5.112 Y13.116 E561.29236 ; support material | |
| G1 X7.914 Y13.116 E561.33204 ; support material | |
| G1 X9.469 Y10.588 E561.37409 ; support material | |
| G1 X11.777 Y10.656 E561.40680 ; support material | |
| G1 X12.847 Y8.924 E561.43564 ; support material | |
| G1 F2100.000 E556.43564 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E561.43564 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E561.44697 F600.000 ; support material | |
| G1 X9.236 Y3.595 E561.46600 ; support material | |
| G1 X8.851 Y4.395 E561.47857 ; support material | |
| G1 X10.580 Y4.395 E561.50306 ; support material | |
| G1 F2100.000 E556.50306 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E561.50306 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E561.50936 F600.000 ; support material | |
| G1 X3.541 Y10.413 E561.53416 ; support material | |
| G1 X1.233 Y10.345 E561.56687 ; support material | |
| G1 X-0.325 Y12.868 E561.60886 ; support material | |
| G1 X-0.191 Y13.116 E561.61286 ; support material | |
| G1 X4.668 Y13.116 E561.68168 ; support material | |
| G1 X4.959 Y12.645 E561.68952 ; support material | |
| G1 X3.863 Y10.612 E561.72223 ; support material | |
| G1 X4.906 Y8.924 E561.75034 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E561.76218 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E561.87378 ; support material | |
| G1 X-5.270 Y8.545 E561.88445 ; support material | |
| G1 X-21.520 Y8.545 E562.11462 ; support material | |
| G1 X-21.520 Y13.495 E562.18473 ; support material | |
| G1 X21.520 Y13.495 E562.79435 ; support material | |
| G1 X21.520 Y8.545 E562.86447 ; support material | |
| G1 X2.246 Y8.545 E563.13746 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E563.16925 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E563.20978 ; support material | |
| G1 X-4.372 Y10.369 E563.24638 ; support material | |
| G1 X-3.277 Y12.402 E563.27909 ; support material | |
| G1 X-3.718 Y13.116 E563.29098 ; support material | |
| G1 X-3.273 Y13.116 E563.29728 ; support material | |
| G1 X-2.955 Y12.601 E563.30587 ; support material | |
| G1 X-0.647 Y12.669 E563.33858 ; support material | |
| G1 X0.911 Y10.146 E563.38057 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E563.41386 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E563.43414 ; support material | |
| G1 X-4.891 Y8.924 E563.44481 ; support material | |
| G1 X-7.853 Y8.924 E563.48676 ; support material | |
| G1 X-7.325 Y9.903 E563.50251 ; support material | |
| G1 X-8.883 Y12.426 E563.54451 ; support material | |
| G1 X-11.191 Y12.358 E563.57722 ; support material | |
| G1 X-11.659 Y13.116 E563.58985 ; support material | |
| G1 X-8.296 Y13.116 E563.63749 ; support material | |
| G1 X-8.561 Y12.625 E563.64540 ; support material | |
| G1 X-7.003 Y10.102 E563.68740 ; support material | |
| G1 X-4.695 Y10.170 E563.72011 ; support material | |
| G1 F2100.000 E558.72011 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E563.72011 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E563.73144 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E563.76118 ; support material | |
| G1 X-11.520 Y4.395 E563.77251 ; support material | |
| G1 X-9.420 Y4.395 E563.80226 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E563.80287 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E563.82189 ; support material | |
| G1 X-11.141 Y4.016 E563.82250 ; support material | |
| G1 X-9.799 Y4.016 E563.84152 ; support material | |
| G1 F2100.000 E558.84152 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E563.84152 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E563.86153 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E563.86783 ; support material | |
| G1 X-12.930 Y9.927 E563.88454 ; support material | |
| G1 X-15.239 Y9.859 E563.91725 ; support material | |
| G1 X-16.796 Y12.382 E563.95924 ; support material | |
| G1 X-16.401 Y13.116 E563.97106 ; support material | |
| G1 X-12.104 Y13.116 E564.03192 ; support material | |
| G1 X-11.513 Y12.159 E564.04786 ; support material | |
| G1 X-12.608 Y10.126 E564.08057 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E564.09242 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E564.15324 ; support material | |
| G1 X-20.844 Y9.883 E564.16921 ; support material | |
| G1 X-19.749 Y11.916 E564.20192 ; support material | |
| G1 X-20.490 Y13.116 E564.22190 ; support material | |
| G1 X-20.045 Y13.116 E564.22820 ; support material | |
| G1 X-19.427 Y12.115 E564.24487 ; support material | |
| G1 X-17.119 Y12.183 E564.27758 ; support material | |
| G1 X-15.561 Y9.660 E564.31958 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E564.33157 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E564.33787 ; support material | |
| G1 X-21.141 Y9.644 E564.34807 ; support material | |
| G1 F2100.000 E559.34807 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E564.34807 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E564.35437 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E564.35508 ; support material | |
| G1 X-20.018 Y4.016 E564.36138 ; support material | |
| G1 X-19.991 Y3.974 E564.36210 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E564.38051 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E564.39326 ; support material | |
| G1 X-21.520 Y4.395 E564.42300 ; support material | |
| G1 X-19.420 Y4.395 E564.45275 ; support material | |
| G1 X-19.420 Y3.595 E564.46408 ; support material | |
| G1 X-20.620 Y3.595 E564.48108 ; support material | |
| M126 ; enable fan | |
| M73 P25 ; update progress | |
| G1 F2100.000 E559.48108 ; retract | |
| G1 Z5.100 F7800.000 ; move to next layer (46) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E564.48108 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E564.50984 F2184.212 ; perimeter | |
| G1 X2.079 Y-0.169 E564.94849 ; perimeter | |
| G1 X2.079 Y1.159 E564.97725 ; perimeter | |
| G1 X-18.124 Y1.159 E565.41460 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E565.46842 F2184.212 ; perimeter | |
| G1 X2.657 Y-0.748 E565.93211 ; perimeter | |
| G1 X2.657 Y1.738 E565.98593 ; perimeter | |
| G1 X-18.703 Y1.738 E566.44832 ; perimeter | |
| G1 X2.674 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.674 Y-11.316 E566.66458 F2184.212 ; perimeter | |
| G1 X4.199 Y-11.316 E566.69758 ; perimeter | |
| G1 X4.199 Y-2.674 E566.88468 ; perimeter | |
| G1 X3.236 Y-2.674 E566.90553 ; perimeter | |
| G1 X3.236 Y2.316 E567.01355 ; perimeter | |
| G1 X-19.341 Y2.316 E567.50229 ; perimeter | |
| G1 X-19.341 Y-1.326 E567.58116 ; perimeter | |
| G1 X2.614 Y-1.326 E568.05644 ; perimeter | |
| G1 X2.196 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.196 Y-11.795 E568.19794 F600.000 ; perimeter | |
| G1 X4.677 Y-11.795 E568.23309 ; perimeter | |
| G1 X4.677 Y-2.195 E568.36907 ; perimeter | |
| G1 X3.714 Y-2.195 E568.38271 ; perimeter | |
| G1 X3.714 Y2.795 E568.45339 ; perimeter | |
| G1 X-19.820 Y2.795 E568.78673 ; perimeter | |
| G1 X-19.820 Y-1.805 E568.85188 ; perimeter | |
| G1 X2.136 Y-1.805 E569.16287 ; perimeter | |
| G1 X2.596 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.790 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E569.80996 F600.000 ; fill | |
| G1 F2100.000 E564.80996 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X3.437 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E569.80996 F2100.000 ; compensate retraction | |
| G1 X3.437 Y-11.027 E570.07506 F600.000 ; fill | |
| G1 F2100.000 E565.07506 ; retract | |
| G1 Z5.100 F7800.000 ; lift plate during travel | |
| G1 X11.881 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z4.900 F7800.000 ; restore layer Z | |
| G1 E570.07506 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E570.21150 F2184.212 ; perimeter | |
| G1 X18.184 Y1.159 E570.24027 ; perimeter | |
| G1 X11.881 Y1.159 E570.37672 ; perimeter | |
| G1 X11.881 Y-0.109 E570.40418 ; perimeter | |
| G1 X11.303 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E570.56568 F2184.212 ; perimeter | |
| G1 X18.763 Y1.738 E570.61949 ; perimeter | |
| G1 X11.303 Y1.738 E570.78099 ; perimeter | |
| G1 X11.303 Y-0.688 E570.83350 ; perimeter | |
| G1 X11.286 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E571.00789 F2184.212 ; perimeter | |
| G1 X19.341 Y2.316 E571.08675 ; perimeter | |
| G1 X10.724 Y2.316 E571.27329 ; perimeter | |
| G1 X10.724 Y-2.674 E571.38132 ; perimeter | |
| G1 X9.761 Y-2.674 E571.40216 ; perimeter | |
| G1 X9.761 Y-11.316 E571.58926 ; perimeter | |
| G1 X11.286 Y-11.316 E571.62226 ; perimeter | |
| G1 X11.286 Y-1.386 E571.83722 ; perimeter | |
| G1 X11.764 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E571.95132 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E572.01648 ; perimeter | |
| G1 X10.246 Y2.795 E572.15209 ; perimeter | |
| G1 X10.246 Y-2.195 E572.22277 ; perimeter | |
| G1 X9.283 Y-2.195 E572.23641 ; perimeter | |
| G1 X9.283 Y-11.795 E572.37238 ; perimeter | |
| G1 X11.764 Y-11.795 E572.40753 ; perimeter | |
| G1 X11.764 Y-1.865 E572.54818 ; perimeter | |
| G1 X11.764 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.523 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.523 Y-11.027 E572.81328 F600.000 ; fill | |
| G1 X12.170 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E573.00147 F600.000 ; fill | |
| M73 P25 ; update progress | |
| G1 F2100.000 E568.00147 ; retract | |
| G1 Z5.200 F7800.000 ; move to next layer (47) and lift | |
| G1 X2.052 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.000 F7800.000 ; restore layer Z | |
| G1 E573.00147 F2100.000 ; compensate retraction | |
| G1 X2.052 Y1.159 E573.03023 F2181.269 ; perimeter | |
| G1 X-18.184 Y1.159 E573.46830 ; perimeter | |
| G1 X-18.184 Y-0.169 E573.49707 ; perimeter | |
| G1 X1.992 Y-0.169 E573.93384 ; perimeter | |
| G1 X2.631 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.631 Y1.738 E573.98765 F2181.269 ; perimeter | |
| G1 X-18.763 Y1.738 E574.45076 ; perimeter | |
| G1 X-18.763 Y-0.748 E574.50458 ; perimeter | |
| G1 X2.571 Y-0.748 E574.96639 ; perimeter | |
| G1 X2.664 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.664 Y-11.316 E575.18265 F2181.269 ; perimeter | |
| G1 X4.157 Y-11.316 E575.21499 ; perimeter | |
| G1 X4.157 Y-2.674 E575.40208 ; perimeter | |
| G1 X3.209 Y-2.674 E575.42261 ; perimeter | |
| G1 X3.209 Y2.316 E575.53064 ; perimeter | |
| G1 X-19.341 Y2.316 E576.01880 ; perimeter | |
| G1 X-19.341 Y-1.326 E576.09766 ; perimeter | |
| G1 X2.604 Y-1.326 E576.57272 ; perimeter | |
| G1 X2.185 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.185 Y-11.795 E576.71422 F600.000 ; perimeter | |
| G1 X4.636 Y-11.795 E576.74893 ; perimeter | |
| G1 X4.636 Y-2.195 E576.88491 ; perimeter | |
| G1 X3.688 Y-2.195 E576.89834 ; perimeter | |
| G1 X3.688 Y2.795 E576.96902 ; perimeter | |
| G1 X-19.820 Y2.795 E577.30198 ; perimeter | |
| G1 X-19.820 Y-1.805 E577.36714 ; perimeter | |
| G1 X2.125 Y-1.805 E577.67797 ; perimeter | |
| G1 X2.585 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.763 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E578.32418 F600.000 ; fill | |
| G1 F2100.000 E573.32418 ; retract | |
| G1 Z5.200 F7800.000 ; lift plate during travel | |
| G1 X3.411 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.000 F7800.000 ; restore layer Z | |
| G1 E578.32418 F2100.000 ; compensate retraction | |
| G1 X3.411 Y-11.027 E578.58928 F600.000 ; fill | |
| G1 F2100.000 E573.58928 ; retract | |
| G1 Z5.200 F7800.000 ; lift plate during travel | |
| G1 X11.908 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.000 F7800.000 ; restore layer Z | |
| G1 E578.58928 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E578.72515 F2181.269 ; perimeter | |
| G1 X18.184 Y1.159 E578.75391 ; perimeter | |
| G1 X11.908 Y1.159 E578.88978 ; perimeter | |
| G1 X11.908 Y-0.109 E578.91725 ; perimeter | |
| G1 X11.329 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E579.07816 F2181.269 ; perimeter | |
| G1 X18.763 Y1.738 E579.13198 ; perimeter | |
| G1 X11.329 Y1.738 E579.29289 ; perimeter | |
| G1 X11.329 Y-0.688 E579.34541 ; perimeter | |
| G1 X11.296 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E579.51957 F2181.269 ; perimeter | |
| G1 X19.341 Y2.316 E579.59843 ; perimeter | |
| G1 X10.751 Y2.316 E579.78439 ; perimeter | |
| G1 X10.751 Y-2.674 E579.89241 ; perimeter | |
| G1 X9.803 Y-2.674 E579.91294 ; perimeter | |
| G1 X9.803 Y-11.316 E580.10004 ; perimeter | |
| G1 X11.296 Y-11.316 E580.13237 ; perimeter | |
| G1 X11.296 Y-1.386 E580.34733 ; perimeter | |
| G1 X11.775 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E580.46129 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E580.52644 ; perimeter | |
| G1 X10.272 Y2.795 E580.66167 ; perimeter | |
| G1 X10.272 Y-2.195 E580.73235 ; perimeter | |
| G1 X9.324 Y-2.195 E580.74578 ; perimeter | |
| G1 X9.324 Y-11.795 E580.88176 ; perimeter | |
| G1 X11.775 Y-11.795 E580.91647 ; perimeter | |
| G1 X11.775 Y-1.865 E581.05712 ; perimeter | |
| G1 X11.775 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.549 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.549 Y-11.027 E581.32222 F600.000 ; fill | |
| G1 X12.197 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E581.50952 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P26 ; update progress | |
| G1 F2100.000 E576.50952 ; retract | |
| G1 Z5.300 F7800.000 ; move to next layer (48) and lift | |
| G1 X2.052 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.100 F7800.000 ; restore layer Z | |
| G1 E581.50952 F2100.000 ; compensate retraction | |
| G1 X2.052 Y1.159 E581.53829 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E581.97636 ; perimeter | |
| G1 X-18.184 Y-0.169 E582.00512 ; perimeter | |
| G1 X1.992 Y-0.169 E582.44189 ; perimeter | |
| G1 X2.631 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.631 Y1.738 E582.49570 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E582.95882 ; perimeter | |
| G1 X-18.763 Y-0.748 E583.01263 ; perimeter | |
| G1 X2.571 Y-0.748 E583.47445 ; perimeter | |
| G1 X2.664 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.664 Y-11.316 E583.69071 F4800.000 ; perimeter | |
| G1 X4.157 Y-11.316 E583.72304 ; perimeter | |
| G1 X4.157 Y-2.674 E583.91014 ; perimeter | |
| G1 X3.209 Y-2.674 E583.93067 ; perimeter | |
| G1 X3.209 Y2.316 E584.03869 ; perimeter | |
| G1 X-19.341 Y2.316 E584.52686 ; perimeter | |
| G1 X-19.341 Y-1.326 E584.60572 ; perimeter | |
| G1 X2.604 Y-1.326 E585.08078 ; perimeter | |
| G1 X2.185 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.185 Y-11.795 E585.22228 F1200.000 ; perimeter | |
| G1 X4.636 Y-11.795 E585.25699 ; perimeter | |
| G1 X4.636 Y-2.195 E585.39296 ; perimeter | |
| G1 X3.688 Y-2.195 E585.40640 ; perimeter | |
| G1 X3.688 Y2.795 E585.47707 ; perimeter | |
| G1 X-19.820 Y2.795 E585.81004 ; perimeter | |
| G1 X-19.820 Y-1.805 E585.87519 ; perimeter | |
| G1 X2.125 Y-1.805 E586.18603 ; perimeter | |
| G1 X2.585 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.763 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E586.83224 F600.000 ; fill | |
| G1 F2100.000 E581.83224 ; retract | |
| G1 Z5.300 F7800.000 ; lift plate during travel | |
| G1 X3.411 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.100 F7800.000 ; restore layer Z | |
| G1 E586.83224 F2100.000 ; compensate retraction | |
| G1 X3.411 Y-11.027 E587.09734 F600.000 ; fill | |
| G1 F2100.000 E582.09734 ; retract | |
| G1 Z5.300 F7800.000 ; lift plate during travel | |
| G1 X11.908 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.100 F7800.000 ; restore layer Z | |
| G1 E587.09734 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E587.23320 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E587.26197 ; perimeter | |
| G1 X11.908 Y1.159 E587.39784 ; perimeter | |
| G1 X11.908 Y-0.109 E587.42530 ; perimeter | |
| G1 X11.329 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E587.58622 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E587.64003 ; perimeter | |
| G1 X11.329 Y1.738 E587.80095 ; perimeter | |
| G1 X11.329 Y-0.688 E587.85346 ; perimeter | |
| G1 X11.296 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E588.02762 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E588.10648 ; perimeter | |
| G1 X10.751 Y2.316 E588.29245 ; perimeter | |
| G1 X10.751 Y-2.674 E588.40047 ; perimeter | |
| G1 X9.803 Y-2.674 E588.42100 ; perimeter | |
| G1 X9.803 Y-11.316 E588.60809 ; perimeter | |
| G1 X11.296 Y-11.316 E588.64043 ; perimeter | |
| G1 X11.296 Y-1.386 E588.85539 ; perimeter | |
| G1 X11.775 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E588.96934 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E589.03450 ; perimeter | |
| G1 X10.272 Y2.795 E589.16973 ; perimeter | |
| G1 X10.272 Y-2.195 E589.24041 ; perimeter | |
| G1 X9.324 Y-2.195 E589.25384 ; perimeter | |
| G1 X9.324 Y-11.795 E589.38981 ; perimeter | |
| G1 X11.775 Y-11.795 E589.42453 ; perimeter | |
| G1 X11.775 Y-1.865 E589.56518 ; perimeter | |
| G1 X11.775 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.549 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.549 Y-11.027 E589.83027 F600.000 ; fill | |
| G1 X12.197 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E590.01758 F600.000 ; fill | |
| M73 P26 ; update progress | |
| G1 F2100.000 E585.01758 ; retract | |
| G1 Z5.400 F7800.000 ; move to next layer (17) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E590.01758 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E590.01819 F600.000 ; support material | |
| G1 X18.859 Y3.974 E590.03721 ; support material | |
| G1 X18.859 Y4.016 E590.03782 ; support material | |
| G1 X20.201 Y4.016 E590.05684 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E590.06817 F600.000 ; support material | |
| G1 X18.480 Y3.595 E590.09791 ; support material | |
| G1 X18.480 Y4.395 E590.10924 ; support material | |
| G1 X20.580 Y4.395 E590.13899 ; support material | |
| G1 F2100.000 E585.13899 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E590.13899 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E590.14920 F600.000 ; support material | |
| G1 X20.013 Y10.899 E590.17962 ; support material | |
| G1 X17.705 Y10.831 E590.21233 ; support material | |
| G1 X16.294 Y13.116 E590.25037 ; support material | |
| G1 X21.141 Y13.116 E590.31904 ; support material | |
| G1 X21.141 Y12.595 E590.32643 ; support material | |
| G1 X20.335 Y11.098 E590.35051 ; support material | |
| G1 X21.141 Y9.792 E590.37225 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E590.41716 F600.000 ; support material | |
| G1 X12.099 Y10.855 E590.44931 ; support material | |
| G1 X13.195 Y12.888 E590.48202 ; support material | |
| G1 X13.054 Y13.116 E590.48582 ; support material | |
| G1 X13.498 Y13.116 E590.49212 ; support material | |
| G1 X13.517 Y13.087 E590.49261 ; support material | |
| G1 X14.519 Y13.116 E590.50682 ; support material | |
| G1 X15.849 Y13.116 E590.52565 ; support material | |
| G1 X17.383 Y10.632 E590.56701 ; support material | |
| G1 X16.462 Y8.924 E590.59449 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E590.65808 F600.000 ; support material | |
| G1 X9.147 Y10.389 E590.68166 ; support material | |
| G1 X7.589 Y12.912 E590.72366 ; support material | |
| G1 X5.281 Y12.844 E590.75637 ; support material | |
| G1 X5.112 Y13.116 E590.76091 ; support material | |
| G1 X7.914 Y13.116 E590.80059 ; support material | |
| G1 X9.469 Y10.588 E590.84263 ; support material | |
| G1 X11.777 Y10.656 E590.87534 ; support material | |
| G1 X12.847 Y8.924 E590.90418 ; support material | |
| G1 F2100.000 E585.90418 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E590.90418 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E590.91551 F600.000 ; support material | |
| G1 X9.236 Y3.595 E590.93454 ; support material | |
| G1 X8.851 Y4.395 E590.94712 ; support material | |
| G1 X10.580 Y4.395 E590.97161 ; support material | |
| G1 F2100.000 E585.97161 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E590.97161 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E590.97791 F600.000 ; support material | |
| G1 X3.541 Y10.413 E591.00270 ; support material | |
| G1 X1.233 Y10.345 E591.03541 ; support material | |
| G1 X-0.325 Y12.868 E591.07741 ; support material | |
| G1 X-0.191 Y13.116 E591.08141 ; support material | |
| G1 X4.668 Y13.116 E591.15022 ; support material | |
| G1 X4.959 Y12.645 E591.15807 ; support material | |
| G1 X3.863 Y10.612 E591.19078 ; support material | |
| G1 X4.906 Y8.924 E591.21888 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E591.23073 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E591.34233 ; support material | |
| G1 X-5.270 Y8.545 E591.35300 ; support material | |
| G1 X-21.520 Y8.545 E591.58317 ; support material | |
| G1 X-21.520 Y13.495 E591.65328 ; support material | |
| G1 X21.520 Y13.495 E592.26290 ; support material | |
| G1 X21.520 Y8.545 E592.33301 ; support material | |
| G1 X2.246 Y8.545 E592.60601 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E592.63780 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E592.67833 ; support material | |
| G1 X-4.372 Y10.369 E592.71493 ; support material | |
| G1 X-3.277 Y12.402 E592.74764 ; support material | |
| G1 X-3.718 Y13.116 E592.75953 ; support material | |
| G1 X-3.273 Y13.116 E592.76583 ; support material | |
| G1 X-2.955 Y12.601 E592.77441 ; support material | |
| G1 X-0.647 Y12.669 E592.80712 ; support material | |
| G1 X0.911 Y10.146 E592.84912 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E592.88241 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E592.90269 ; support material | |
| G1 X-4.891 Y8.924 E592.91336 ; support material | |
| G1 X-7.853 Y8.924 E592.95530 ; support material | |
| G1 X-7.325 Y9.903 E592.97106 ; support material | |
| G1 X-8.883 Y12.426 E593.01306 ; support material | |
| G1 X-11.191 Y12.358 E593.04577 ; support material | |
| G1 X-11.659 Y13.116 E593.05839 ; support material | |
| G1 X-8.296 Y13.116 E593.10604 ; support material | |
| G1 X-8.561 Y12.625 E593.11394 ; support material | |
| G1 X-7.003 Y10.102 E593.15594 ; support material | |
| G1 X-4.695 Y10.170 E593.18865 ; support material | |
| G1 F2100.000 E588.18865 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E593.18865 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E593.19998 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E593.22973 ; support material | |
| G1 X-11.520 Y4.395 E593.24106 ; support material | |
| G1 X-9.420 Y4.395 E593.27080 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E593.27141 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E593.29043 ; support material | |
| G1 X-11.141 Y4.016 E593.29104 ; support material | |
| G1 X-9.799 Y4.016 E593.31006 ; support material | |
| G1 F2100.000 E588.31006 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E593.31006 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E593.33008 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E593.33638 ; support material | |
| G1 X-12.930 Y9.927 E593.35308 ; support material | |
| G1 X-15.239 Y9.859 E593.38579 ; support material | |
| G1 X-16.796 Y12.382 E593.42779 ; support material | |
| G1 X-16.401 Y13.116 E593.43961 ; support material | |
| G1 X-12.104 Y13.116 E593.50046 ; support material | |
| G1 X-11.513 Y12.159 E593.51640 ; support material | |
| G1 X-12.608 Y10.126 E593.54911 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E593.56096 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E593.62179 ; support material | |
| G1 X-20.844 Y9.883 E593.63775 ; support material | |
| G1 X-19.749 Y11.916 E593.67047 ; support material | |
| G1 X-20.490 Y13.116 E593.69045 ; support material | |
| G1 X-20.045 Y13.116 E593.69675 ; support material | |
| G1 X-19.427 Y12.115 E593.71342 ; support material | |
| G1 X-17.119 Y12.183 E593.74613 ; support material | |
| G1 X-15.561 Y9.660 E593.78813 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E593.80011 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E593.80641 ; support material | |
| G1 X-21.141 Y9.644 E593.81661 ; support material | |
| G1 F2100.000 E588.81661 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E593.81661 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E593.82291 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E593.82363 ; support material | |
| G1 X-20.018 Y4.016 E593.82993 ; support material | |
| G1 X-19.991 Y3.974 E593.83064 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E593.84906 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E593.86180 ; support material | |
| G1 X-21.520 Y4.395 E593.89155 ; support material | |
| G1 X-19.420 Y4.395 E593.92129 ; support material | |
| G1 X-19.420 Y3.595 E593.93262 ; support material | |
| G1 X-20.620 Y3.595 E593.94962 ; support material | |
| M126 ; enable fan | |
| M73 P26 ; update progress | |
| G1 F2100.000 E588.94962 ; retract | |
| G1 Z5.400 F7800.000 ; move to next layer (49) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E593.94962 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E593.97839 F2184.212 ; perimeter | |
| G1 X2.079 Y-0.169 E594.41703 ; perimeter | |
| G1 X2.079 Y1.159 E594.44580 ; perimeter | |
| G1 X-18.124 Y1.159 E594.88315 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E594.93696 F2184.212 ; perimeter | |
| G1 X2.657 Y-0.748 E595.40066 ; perimeter | |
| G1 X2.657 Y1.738 E595.45447 ; perimeter | |
| G1 X-18.703 Y1.738 E595.91687 ; perimeter | |
| G1 X2.674 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.674 Y-11.316 E596.13313 F2184.212 ; perimeter | |
| G1 X4.199 Y-11.316 E596.16613 ; perimeter | |
| G1 X4.199 Y-2.674 E596.35323 ; perimeter | |
| G1 X3.236 Y-2.674 E596.37407 ; perimeter | |
| G1 X3.236 Y2.316 E596.48210 ; perimeter | |
| G1 X-19.341 Y2.316 E596.97084 ; perimeter | |
| G1 X-19.341 Y-1.326 E597.04970 ; perimeter | |
| G1 X2.614 Y-1.326 E597.52499 ; perimeter | |
| G1 X2.196 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.196 Y-11.795 E597.66649 F600.000 ; perimeter | |
| G1 X4.677 Y-11.795 E597.70164 ; perimeter | |
| G1 X4.677 Y-2.195 E597.83761 ; perimeter | |
| G1 X3.714 Y-2.195 E597.85125 ; perimeter | |
| G1 X3.714 Y2.795 E597.92193 ; perimeter | |
| G1 X-19.820 Y2.795 E598.25527 ; perimeter | |
| G1 X-19.820 Y-1.805 E598.32043 ; perimeter | |
| G1 X2.136 Y-1.805 E598.63141 ; perimeter | |
| G1 X2.596 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.790 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E599.27850 F600.000 ; fill | |
| G1 F2100.000 E594.27850 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X3.437 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E599.27850 F2100.000 ; compensate retraction | |
| G1 X3.437 Y-11.027 E599.54360 F600.000 ; fill | |
| G1 F2100.000 E594.54360 ; retract | |
| G1 Z5.400 F7800.000 ; lift plate during travel | |
| G1 X11.881 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.200 F7800.000 ; restore layer Z | |
| G1 E599.54360 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E599.68005 F2184.212 ; perimeter | |
| G1 X18.184 Y1.159 E599.70881 ; perimeter | |
| G1 X11.881 Y1.159 E599.84526 ; perimeter | |
| G1 X11.881 Y-0.109 E599.87273 ; perimeter | |
| G1 X11.303 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E600.03422 F2184.212 ; perimeter | |
| G1 X18.763 Y1.738 E600.08804 ; perimeter | |
| G1 X11.303 Y1.738 E600.24953 ; perimeter | |
| G1 X11.303 Y-0.688 E600.30205 ; perimeter | |
| G1 X11.286 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E600.47644 F2184.212 ; perimeter | |
| G1 X19.341 Y2.316 E600.55530 ; perimeter | |
| G1 X10.724 Y2.316 E600.74184 ; perimeter | |
| G1 X10.724 Y-2.674 E600.84986 ; perimeter | |
| G1 X9.761 Y-2.674 E600.87071 ; perimeter | |
| G1 X9.761 Y-11.316 E601.05781 ; perimeter | |
| G1 X11.286 Y-11.316 E601.09081 ; perimeter | |
| G1 X11.286 Y-1.386 E601.30577 ; perimeter | |
| G1 X11.764 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E601.41987 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E601.48502 ; perimeter | |
| G1 X10.246 Y2.795 E601.62064 ; perimeter | |
| G1 X10.246 Y-2.195 E601.69132 ; perimeter | |
| G1 X9.283 Y-2.195 E601.70495 ; perimeter | |
| G1 X9.283 Y-11.795 E601.84093 ; perimeter | |
| G1 X11.764 Y-11.795 E601.87608 ; perimeter | |
| G1 X11.764 Y-1.865 E602.01673 ; perimeter | |
| G1 X11.764 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.523 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.523 Y-11.027 E602.28183 F600.000 ; fill | |
| G1 X12.170 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E602.47001 F600.000 ; fill | |
| M73 P27 ; update progress | |
| G1 F2100.000 E597.47001 ; retract | |
| G1 Z5.500 F7800.000 ; move to next layer (50) and lift | |
| G1 X2.106 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.300 F7800.000 ; restore layer Z | |
| G1 E602.47001 F2100.000 ; compensate retraction | |
| G1 X2.106 Y1.159 E602.49878 F2187.155 ; perimeter | |
| G1 X-18.184 Y1.159 E602.93801 ; perimeter | |
| G1 X-18.184 Y-0.169 E602.96677 ; perimeter | |
| G1 X2.046 Y-0.169 E603.40470 ; perimeter | |
| G1 X2.684 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.684 Y1.738 E603.45851 F2187.155 ; perimeter | |
| G1 X-18.763 Y1.738 E603.92279 ; perimeter | |
| G1 X-18.763 Y-0.748 E603.97660 ; perimeter | |
| G1 X2.624 Y-0.748 E604.43958 ; perimeter | |
| G1 X2.685 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.685 Y-11.316 E604.65584 F2187.155 ; perimeter | |
| G1 X4.240 Y-11.316 E604.68951 ; perimeter | |
| G1 X4.240 Y-2.674 E604.87661 ; perimeter | |
| G1 X3.263 Y-2.674 E604.89777 ; perimeter | |
| G1 X3.263 Y2.316 E605.00579 ; perimeter | |
| G1 X-19.341 Y2.316 E605.49512 ; perimeter | |
| G1 X-19.341 Y-1.326 E605.57398 ; perimeter | |
| G1 X2.625 Y-1.326 E606.04949 ; perimeter | |
| G1 X2.206 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.206 Y-11.795 E606.19099 F600.000 ; perimeter | |
| G1 X4.719 Y-11.795 E606.22658 ; perimeter | |
| G1 X4.719 Y-2.195 E606.36256 ; perimeter | |
| G1 X3.741 Y-2.195 E606.37640 ; perimeter | |
| G1 X3.741 Y2.795 E606.44708 ; perimeter | |
| G1 X-19.820 Y2.795 E606.78080 ; perimeter | |
| G1 X-19.820 Y-1.805 E606.84596 ; perimeter | |
| G1 X2.146 Y-1.805 E607.15709 ; perimeter | |
| G1 X2.606 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.816 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E607.80506 F600.000 ; fill | |
| G1 F2100.000 E602.80506 ; retract | |
| G1 Z5.500 F7800.000 ; lift plate during travel | |
| G1 X3.463 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.300 F7800.000 ; restore layer Z | |
| G1 E607.80506 F2100.000 ; compensate retraction | |
| G1 X3.463 Y-11.027 E608.07016 F600.000 ; fill | |
| G1 F2100.000 E603.07016 ; retract | |
| G1 Z5.500 F7800.000 ; lift plate during travel | |
| G1 X11.854 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.300 F7800.000 ; restore layer Z | |
| G1 E608.07016 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E608.20719 F2187.155 ; perimeter | |
| G1 X18.184 Y1.159 E608.23595 ; perimeter | |
| G1 X11.854 Y1.159 E608.37298 ; perimeter | |
| G1 X11.854 Y-0.109 E608.40045 ; perimeter | |
| G1 X11.276 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E608.56252 F2187.155 ; perimeter | |
| G1 X18.763 Y1.738 E608.61634 ; perimeter | |
| G1 X11.276 Y1.738 E608.77841 ; perimeter | |
| G1 X11.276 Y-0.688 E608.83093 ; perimeter | |
| G1 X11.275 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E609.00554 F2187.155 ; perimeter | |
| G1 X19.341 Y2.316 E609.08440 ; perimeter | |
| G1 X10.697 Y2.316 E609.27153 ; perimeter | |
| G1 X10.697 Y-2.674 E609.37955 ; perimeter | |
| G1 X9.720 Y-2.674 E609.40071 ; perimeter | |
| G1 X9.720 Y-11.316 E609.58781 ; perimeter | |
| G1 X11.275 Y-11.316 E609.62148 ; perimeter | |
| G1 X11.275 Y-1.386 E609.83644 ; perimeter | |
| G1 X11.754 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E609.95069 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E610.01585 ; perimeter | |
| G1 X10.219 Y2.795 E610.15184 ; perimeter | |
| G1 X10.219 Y-2.195 E610.22252 ; perimeter | |
| G1 X9.241 Y-2.195 E610.23636 ; perimeter | |
| G1 X9.241 Y-11.795 E610.37234 ; perimeter | |
| G1 X11.754 Y-11.795 E610.40793 ; perimeter | |
| G1 X11.754 Y-1.865 E610.54857 ; perimeter | |
| G1 X11.754 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.497 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.497 Y-11.027 E610.81367 F600.000 ; fill | |
| G1 X12.144 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E611.00274 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P27 ; update progress | |
| G1 F2100.000 E606.00274 ; retract | |
| G1 Z5.600 F7800.000 ; move to next layer (51) and lift | |
| G1 X2.132 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.400 F7800.000 ; restore layer Z | |
| G1 E611.00274 F2100.000 ; compensate retraction | |
| G1 X2.132 Y1.159 E611.03150 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E611.47131 ; perimeter | |
| G1 X-18.184 Y-0.169 E611.50008 ; perimeter | |
| G1 X2.072 Y-0.169 E611.93859 ; perimeter | |
| G1 X2.711 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.711 Y1.738 E611.99240 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E612.45726 ; perimeter | |
| G1 X-18.763 Y-0.748 E612.51107 ; perimeter | |
| G1 X2.651 Y-0.748 E612.97463 ; perimeter | |
| G1 X2.695 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.695 Y-11.316 E613.19089 F4800.000 ; perimeter | |
| G1 X4.282 Y-11.316 E613.22523 ; perimeter | |
| G1 X4.282 Y-2.674 E613.41232 ; perimeter | |
| G1 X3.289 Y-2.674 E613.43380 ; perimeter | |
| G1 X3.289 Y2.316 E613.54183 ; perimeter | |
| G1 X-19.341 Y2.316 E614.03173 ; perimeter | |
| G1 X-19.341 Y-1.326 E614.11059 ; perimeter | |
| G1 X2.635 Y-1.326 E614.58634 ; perimeter | |
| G1 X2.217 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.217 Y-11.795 E614.72783 F1200.000 ; perimeter | |
| G1 X4.760 Y-11.795 E614.76386 ; perimeter | |
| G1 X4.760 Y-2.195 E614.89983 ; perimeter | |
| G1 X3.768 Y-2.195 E614.91389 ; perimeter | |
| G1 X3.768 Y2.795 E614.98457 ; perimeter | |
| G1 X-19.820 Y2.795 E615.31867 ; perimeter | |
| G1 X-19.820 Y-1.805 E615.38382 ; perimeter | |
| G1 X2.157 Y-1.805 E615.69510 ; perimeter | |
| G1 X2.617 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.843 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E616.34396 F600.000 ; fill | |
| G1 F2100.000 E611.34396 ; retract | |
| G1 Z5.600 F7800.000 ; lift plate during travel | |
| G1 X3.488 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.400 F7800.000 ; restore layer Z | |
| G1 E616.34396 F2100.000 ; compensate retraction | |
| G1 X3.488 Y-11.027 E616.60906 F600.000 ; fill | |
| G1 F2100.000 E611.60906 ; retract | |
| G1 Z5.600 F7800.000 ; lift plate during travel | |
| G1 X11.828 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.400 F7800.000 ; restore layer Z | |
| G1 E616.60906 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E616.74666 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E616.77543 ; perimeter | |
| G1 X11.828 Y1.159 E616.91304 ; perimeter | |
| G1 X11.828 Y-0.109 E616.94050 ; perimeter | |
| G1 X11.249 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E617.10316 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E617.15697 ; perimeter | |
| G1 X11.249 Y1.738 E617.31963 ; perimeter | |
| G1 X11.249 Y-0.688 E617.37214 ; perimeter | |
| G1 X11.265 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E617.54698 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E617.62585 ; perimeter | |
| G1 X10.671 Y2.316 E617.81355 ; perimeter | |
| G1 X10.671 Y-2.674 E617.92157 ; perimeter | |
| G1 X9.678 Y-2.674 E617.94305 ; perimeter | |
| G1 X9.678 Y-11.316 E618.13015 ; perimeter | |
| G1 X11.265 Y-11.316 E618.16449 ; perimeter | |
| G1 X11.265 Y-1.386 E618.37945 ; perimeter | |
| G1 X11.743 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E618.49385 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E618.55900 ; perimeter | |
| G1 X10.192 Y2.795 E618.69537 ; perimeter | |
| G1 X10.192 Y-2.195 E618.76605 ; perimeter | |
| G1 X9.200 Y-2.195 E618.78011 ; perimeter | |
| G1 X9.200 Y-11.795 E618.91608 ; perimeter | |
| G1 X11.743 Y-11.795 E618.95211 ; perimeter | |
| G1 X11.743 Y-1.865 E619.09276 ; perimeter | |
| G1 X11.743 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.472 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.472 Y-11.027 E619.35786 F600.000 ; fill | |
| G1 X12.117 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E619.54780 F600.000 ; fill | |
| M73 P28 ; update progress | |
| G1 F2100.000 E614.54780 ; retract | |
| G1 Z5.700 F7800.000 ; move to next layer (18) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E619.54780 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E619.54841 F600.000 ; support material | |
| G1 X18.859 Y3.974 E619.56743 ; support material | |
| G1 X18.859 Y4.016 E619.56804 ; support material | |
| G1 X20.201 Y4.016 E619.58706 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E619.59839 F600.000 ; support material | |
| G1 X18.480 Y3.595 E619.62814 ; support material | |
| G1 X18.480 Y4.395 E619.63947 ; support material | |
| G1 X20.580 Y4.395 E619.66921 ; support material | |
| G1 F2100.000 E614.66921 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E619.66921 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E619.67942 F600.000 ; support material | |
| G1 X20.013 Y10.899 E619.70984 ; support material | |
| G1 X17.705 Y10.831 E619.74255 ; support material | |
| G1 X16.294 Y13.116 E619.78060 ; support material | |
| G1 X21.141 Y13.116 E619.84926 ; support material | |
| G1 X21.141 Y12.595 E619.85665 ; support material | |
| G1 X20.335 Y11.098 E619.88073 ; support material | |
| G1 X21.141 Y9.792 E619.90247 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E619.94738 F600.000 ; support material | |
| G1 X12.099 Y10.855 E619.97953 ; support material | |
| G1 X13.195 Y12.888 E620.01224 ; support material | |
| G1 X13.054 Y13.116 E620.01604 ; support material | |
| G1 X13.498 Y13.116 E620.02234 ; support material | |
| G1 X13.517 Y13.087 E620.02284 ; support material | |
| G1 X14.519 Y13.116 E620.03704 ; support material | |
| G1 X15.849 Y13.116 E620.05588 ; support material | |
| G1 X17.383 Y10.632 E620.09723 ; support material | |
| G1 X16.462 Y8.924 E620.12472 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E620.18831 F600.000 ; support material | |
| G1 X9.147 Y10.389 E620.21188 ; support material | |
| G1 X7.589 Y12.912 E620.25388 ; support material | |
| G1 X5.281 Y12.844 E620.28659 ; support material | |
| G1 X5.112 Y13.116 E620.29113 ; support material | |
| G1 X7.914 Y13.116 E620.33081 ; support material | |
| G1 X9.469 Y10.588 E620.37286 ; support material | |
| G1 X11.777 Y10.656 E620.40557 ; support material | |
| G1 X12.847 Y8.924 E620.43440 ; support material | |
| G1 F2100.000 E615.43440 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E620.43440 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E620.44574 F600.000 ; support material | |
| G1 X9.236 Y3.595 E620.46477 ; support material | |
| G1 X8.851 Y4.395 E620.47734 ; support material | |
| G1 X10.580 Y4.395 E620.50183 ; support material | |
| G1 F2100.000 E615.50183 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E620.50183 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E620.50813 F600.000 ; support material | |
| G1 X3.541 Y10.413 E620.53292 ; support material | |
| G1 X1.233 Y10.345 E620.56563 ; support material | |
| G1 X-0.325 Y12.868 E620.60763 ; support material | |
| G1 X-0.191 Y13.116 E620.61163 ; support material | |
| G1 X4.668 Y13.116 E620.68045 ; support material | |
| G1 X4.959 Y12.645 E620.68829 ; support material | |
| G1 X3.863 Y10.612 E620.72100 ; support material | |
| G1 X4.906 Y8.924 E620.74911 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E620.76095 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E620.87255 ; support material | |
| G1 X-5.270 Y8.545 E620.88322 ; support material | |
| G1 X-21.520 Y8.545 E621.11339 ; support material | |
| G1 X-21.520 Y13.495 E621.18350 ; support material | |
| G1 X21.520 Y13.495 E621.79312 ; support material | |
| G1 X21.520 Y8.545 E621.86323 ; support material | |
| G1 X2.246 Y8.545 E622.13623 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E622.16802 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E622.20855 ; support material | |
| G1 X-4.372 Y10.369 E622.24515 ; support material | |
| G1 X-3.277 Y12.402 E622.27786 ; support material | |
| G1 X-3.718 Y13.116 E622.28975 ; support material | |
| G1 X-3.273 Y13.116 E622.29605 ; support material | |
| G1 X-2.955 Y12.601 E622.30464 ; support material | |
| G1 X-0.647 Y12.669 E622.33735 ; support material | |
| G1 X0.911 Y10.146 E622.37934 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E622.41263 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E622.43291 ; support material | |
| G1 X-4.891 Y8.924 E622.44358 ; support material | |
| G1 X-7.853 Y8.924 E622.48552 ; support material | |
| G1 X-7.325 Y9.903 E622.50128 ; support material | |
| G1 X-8.883 Y12.426 E622.54328 ; support material | |
| G1 X-11.191 Y12.358 E622.57599 ; support material | |
| G1 X-11.659 Y13.116 E622.58862 ; support material | |
| G1 X-8.296 Y13.116 E622.63626 ; support material | |
| G1 X-8.561 Y12.625 E622.64417 ; support material | |
| G1 X-7.003 Y10.102 E622.68617 ; support material | |
| G1 X-4.695 Y10.170 E622.71888 ; support material | |
| G1 F2100.000 E617.71888 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E622.71888 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E622.73021 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E622.75995 ; support material | |
| G1 X-11.520 Y4.395 E622.77128 ; support material | |
| G1 X-9.420 Y4.395 E622.80103 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E622.80164 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E622.82066 ; support material | |
| G1 X-11.141 Y4.016 E622.82126 ; support material | |
| G1 X-9.799 Y4.016 E622.84029 ; support material | |
| G1 F2100.000 E617.84029 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E622.84029 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E622.86030 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E622.86660 ; support material | |
| G1 X-12.930 Y9.927 E622.88331 ; support material | |
| G1 X-15.239 Y9.859 E622.91602 ; support material | |
| G1 X-16.796 Y12.382 E622.95801 ; support material | |
| G1 X-16.401 Y13.116 E622.96983 ; support material | |
| G1 X-12.104 Y13.116 E623.03069 ; support material | |
| G1 X-11.513 Y12.159 E623.04662 ; support material | |
| G1 X-12.608 Y10.126 E623.07933 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E623.09118 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E623.15201 ; support material | |
| G1 X-20.844 Y9.883 E623.16798 ; support material | |
| G1 X-19.749 Y11.916 E623.20069 ; support material | |
| G1 X-20.490 Y13.116 E623.22067 ; support material | |
| G1 X-20.045 Y13.116 E623.22697 ; support material | |
| G1 X-19.427 Y12.115 E623.24364 ; support material | |
| G1 X-17.119 Y12.183 E623.27635 ; support material | |
| G1 X-15.561 Y9.660 E623.31835 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E623.33034 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E623.33663 ; support material | |
| G1 X-21.141 Y9.644 E623.34684 ; support material | |
| G1 F2100.000 E618.34684 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E623.34684 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E623.35314 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E623.35385 ; support material | |
| G1 X-20.018 Y4.016 E623.36015 ; support material | |
| G1 X-19.991 Y3.974 E623.36087 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E623.37928 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E623.39203 ; support material | |
| G1 X-21.520 Y4.395 E623.42177 ; support material | |
| G1 X-19.420 Y4.395 E623.45152 ; support material | |
| G1 X-19.420 Y3.595 E623.46285 ; support material | |
| G1 X-20.620 Y3.595 E623.47984 ; support material | |
| M126 ; enable fan | |
| M73 P28 ; update progress | |
| G1 F2100.000 E618.47984 ; retract | |
| G1 Z5.700 F7800.000 ; move to next layer (52) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E623.47984 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E623.50861 F2193.041 ; perimeter | |
| G1 X2.159 Y-0.169 E623.94900 ; perimeter | |
| G1 X2.159 Y1.159 E623.97776 ; perimeter | |
| G1 X-18.124 Y1.159 E624.41685 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E624.47067 F2193.041 ; perimeter | |
| G1 X2.738 Y-0.748 E624.93610 ; perimeter | |
| G1 X2.738 Y1.738 E624.98991 ; perimeter | |
| G1 X-18.703 Y1.738 E625.45405 ; perimeter | |
| G1 X2.706 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.706 Y-11.316 E625.67031 F2193.041 ; perimeter | |
| G1 X4.323 Y-11.316 E625.70532 ; perimeter | |
| G1 X4.323 Y-2.674 E625.89242 ; perimeter | |
| G1 X3.316 Y-2.674 E625.91421 ; perimeter | |
| G1 X3.316 Y2.316 E626.02224 ; perimeter | |
| G1 X-19.341 Y2.316 E626.51272 ; perimeter | |
| G1 X-19.341 Y-1.326 E626.59158 ; perimeter | |
| G1 X2.646 Y-1.326 E627.06755 ; perimeter | |
| G1 X2.227 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.227 Y-11.795 E627.20905 F600.000 ; perimeter | |
| G1 X4.802 Y-11.795 E627.24552 ; perimeter | |
| G1 X4.802 Y-2.195 E627.38149 ; perimeter | |
| G1 X3.795 Y-2.195 E627.39575 ; perimeter | |
| G1 X3.795 Y2.795 E627.46643 ; perimeter | |
| G1 X-19.820 Y2.795 E627.80091 ; perimeter | |
| G1 X-19.820 Y-1.805 E627.86607 ; perimeter | |
| G1 X2.167 Y-1.805 E628.17750 ; perimeter | |
| G1 X2.627 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X1.870 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E628.82723 F600.000 ; fill | |
| G1 F2100.000 E623.82723 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X3.514 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E628.82723 F2100.000 ; compensate retraction | |
| G1 X3.514 Y-11.027 E629.09233 F600.000 ; fill | |
| G1 F2100.000 E624.09233 ; retract | |
| G1 Z5.700 F7800.000 ; lift plate during travel | |
| G1 X11.801 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.500 F7800.000 ; restore layer Z | |
| G1 E629.09233 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E629.23052 F2193.041 ; perimeter | |
| G1 X18.184 Y1.159 E629.25928 ; perimeter | |
| G1 X11.801 Y1.159 E629.39747 ; perimeter | |
| G1 X11.801 Y-0.109 E629.42494 ; perimeter | |
| G1 X11.222 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E629.58817 F2193.041 ; perimeter | |
| G1 X18.763 Y1.738 E629.64198 ; perimeter | |
| G1 X11.222 Y1.738 E629.80522 ; perimeter | |
| G1 X11.222 Y-0.688 E629.85773 ; perimeter | |
| G1 X11.254 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E630.03281 F2193.041 ; perimeter | |
| G1 X19.341 Y2.316 E630.11167 ; perimeter | |
| G1 X10.644 Y2.316 E630.29995 ; perimeter | |
| G1 X10.644 Y-2.674 E630.40797 ; perimeter | |
| G1 X9.637 Y-2.674 E630.42977 ; perimeter | |
| G1 X9.637 Y-11.316 E630.61687 ; perimeter | |
| G1 X11.254 Y-11.316 E630.65187 ; perimeter | |
| G1 X11.254 Y-1.386 E630.86683 ; perimeter | |
| G1 X11.733 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E630.98138 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E631.04654 ; perimeter | |
| G1 X10.165 Y2.795 E631.18329 ; perimeter | |
| G1 X10.165 Y-2.195 E631.25397 ; perimeter | |
| G1 X9.158 Y-2.195 E631.26823 ; perimeter | |
| G1 X9.158 Y-11.795 E631.40420 ; perimeter | |
| G1 X11.733 Y-11.795 E631.44067 ; perimeter | |
| G1 X11.733 Y-1.865 E631.58132 ; perimeter | |
| G1 X11.733 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.446 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.446 Y-11.027 E631.84642 F600.000 ; fill | |
| G1 X12.090 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E632.03724 F600.000 ; fill | |
| M73 P28 ; update progress | |
| G1 F2100.000 E627.03724 ; retract | |
| G1 Z5.800 F7800.000 ; move to next layer (53) and lift | |
| G1 X2.186 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.600 F7800.000 ; restore layer Z | |
| G1 E632.03724 F2100.000 ; compensate retraction | |
| G1 X2.186 Y1.159 E632.06601 F2001.499 ; perimeter | |
| G1 X-18.184 Y1.159 E632.50698 ; perimeter | |
| G1 X-18.184 Y-0.169 E632.53574 ; perimeter | |
| G1 X2.126 Y-0.169 E632.97541 ; perimeter | |
| G1 X2.764 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.764 Y1.738 E633.02922 F2001.499 ; perimeter | |
| G1 X-18.763 Y1.738 E633.49524 ; perimeter | |
| G1 X-18.763 Y-0.748 E633.54905 ; perimeter | |
| G1 X2.704 Y-0.748 E634.01377 ; perimeter | |
| G1 X3.295 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.295 Y-10.738 E634.17582 F2001.499 ; perimeter | |
| G1 X3.786 Y-10.738 E634.18645 ; perimeter | |
| G1 X3.786 Y-3.252 E634.34850 ; perimeter | |
| G1 X3.355 Y-3.252 E634.35783 ; perimeter | |
| G1 X3.343 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.343 Y2.316 E634.46585 F2001.499 ; perimeter | |
| G1 X-19.341 Y2.316 E634.95692 ; perimeter | |
| G1 X-19.341 Y-1.326 E635.03578 ; perimeter | |
| G1 X2.716 Y-1.326 E635.51328 ; perimeter | |
| G1 X2.716 Y-11.316 E635.72954 ; perimeter | |
| G1 X4.364 Y-11.316 E635.76522 ; perimeter | |
| G1 X4.364 Y-2.674 E635.95231 ; perimeter | |
| G1 X3.403 Y-2.674 E635.97313 ; perimeter | |
| G1 X3.822 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.822 Y2.795 E636.04381 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E636.37867 ; perimeter | |
| G1 X-19.820 Y-1.805 E636.44382 ; perimeter | |
| G1 X2.238 Y-1.805 E636.75625 ; perimeter | |
| G1 X2.238 Y-11.795 E636.89775 ; perimeter | |
| G1 X4.843 Y-11.795 E636.93465 ; perimeter | |
| G1 X4.843 Y-2.195 E637.07063 ; perimeter | |
| G1 X3.882 Y-2.195 E637.08424 ; perimeter | |
| G1 X3.422 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.897 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E637.73486 F600.000 ; fill | |
| G1 F2100.000 E632.73486 ; retract | |
| G1 Z5.800 F7800.000 ; lift plate during travel | |
| G1 X11.774 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.600 F7800.000 ; restore layer Z | |
| G1 E637.73486 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E637.87363 F2001.499 ; perimeter | |
| G1 X18.184 Y1.159 E637.90239 ; perimeter | |
| G1 X11.774 Y1.159 E638.04116 ; perimeter | |
| G1 X11.774 Y-0.109 E638.06862 ; perimeter | |
| G1 X11.196 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E638.23244 F2001.499 ; perimeter | |
| G1 X18.763 Y1.738 E638.28625 ; perimeter | |
| G1 X11.196 Y1.738 E638.45007 ; perimeter | |
| G1 X11.196 Y-0.688 E638.50258 ; perimeter | |
| G1 X10.665 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.174 Y-3.252 E638.51321 F2001.499 ; perimeter | |
| G1 X10.174 Y-10.738 E638.67526 ; perimeter | |
| G1 X10.665 Y-10.738 E638.68589 ; perimeter | |
| G1 X10.665 Y-3.312 E638.84664 ; perimeter | |
| G1 X10.617 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.596 Y-2.674 E638.86876 F2001.499 ; perimeter | |
| G1 X9.596 Y-11.316 E639.05586 ; perimeter | |
| G1 X11.244 Y-11.316 E639.09153 ; perimeter | |
| G1 X11.244 Y-1.326 E639.30779 ; perimeter | |
| G1 X19.341 Y-1.326 E639.48309 ; perimeter | |
| G1 X19.341 Y2.316 E639.56195 ; perimeter | |
| G1 X10.617 Y2.316 E639.75082 ; perimeter | |
| G1 X10.617 Y-2.614 E639.85754 ; perimeter | |
| G1 X10.138 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.117 Y-2.195 E639.87201 F600.000 ; perimeter | |
| G1 X9.117 Y-11.795 E640.00798 ; perimeter | |
| G1 X11.722 Y-11.795 E640.04488 ; perimeter | |
| G1 X11.722 Y-1.805 E640.18638 ; perimeter | |
| G1 X19.820 Y-1.805 E640.30108 ; perimeter | |
| G1 X19.820 Y2.795 E640.36623 ; perimeter | |
| G1 X10.138 Y2.795 E640.50336 ; perimeter | |
| G1 X10.138 Y-2.135 E640.57319 ; perimeter | |
| G1 X10.138 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.063 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E640.76490 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P29 ; update progress | |
| G1 F2100.000 E635.76490 ; retract | |
| G1 Z5.900 F7800.000 ; move to next layer (54) and lift | |
| G1 X2.213 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.700 F7800.000 ; restore layer Z | |
| G1 E640.76490 F2100.000 ; compensate retraction | |
| G1 X2.213 Y1.159 E640.79367 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E641.23521 ; perimeter | |
| G1 X-18.184 Y-0.169 E641.26398 ; perimeter | |
| G1 X2.153 Y-0.169 E641.70423 ; perimeter | |
| G1 X2.791 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.791 Y1.738 E641.75804 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E642.22464 ; perimeter | |
| G1 X-18.763 Y-0.748 E642.27845 ; perimeter | |
| G1 X2.731 Y-0.748 E642.74375 ; perimeter | |
| G1 X3.305 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.305 Y-10.738 E642.90580 F4800.000 ; perimeter | |
| G1 X3.827 Y-10.738 E642.91710 ; perimeter | |
| G1 X3.827 Y-3.252 E643.07915 ; perimeter | |
| G1 X3.365 Y-3.252 E643.08915 ; perimeter | |
| G1 X3.370 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.370 Y2.316 E643.19717 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E643.68882 ; perimeter | |
| G1 X-19.341 Y-1.326 E643.76768 ; perimeter | |
| G1 X2.727 Y-1.326 E644.24540 ; perimeter | |
| G1 X2.727 Y-11.316 E644.46166 ; perimeter | |
| G1 X4.406 Y-11.316 E644.49801 ; perimeter | |
| G1 X4.406 Y-2.674 E644.68511 ; perimeter | |
| G1 X3.430 Y-2.674 E644.70624 ; perimeter | |
| G1 X3.848 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.848 Y2.795 E644.77692 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E645.11216 ; perimeter | |
| G1 X-19.820 Y-1.805 E645.17731 ; perimeter | |
| G1 X2.248 Y-1.805 E645.48989 ; perimeter | |
| G1 X2.248 Y-11.795 E645.63139 ; perimeter | |
| G1 X4.884 Y-11.795 E645.66873 ; perimeter | |
| G1 X4.884 Y-2.195 E645.80470 ; perimeter | |
| G1 X3.908 Y-2.195 E645.81853 ; perimeter | |
| G1 X3.448 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.923 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E646.47002 F600.000 ; fill | |
| G1 F2100.000 E641.47002 ; retract | |
| G1 Z5.900 F7800.000 ; lift plate during travel | |
| G1 X11.747 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.700 F7800.000 ; restore layer Z | |
| G1 E646.47002 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E646.60937 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E646.63813 ; perimeter | |
| G1 X11.747 Y1.159 E646.77748 ; perimeter | |
| G1 X11.747 Y-0.109 E646.80495 ; perimeter | |
| G1 X11.169 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E646.96935 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E647.02316 ; perimeter | |
| G1 X11.169 Y1.738 E647.18755 ; perimeter | |
| G1 X11.169 Y-0.688 E647.24007 ; perimeter | |
| G1 X10.655 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.133 Y-3.252 E647.25137 F4800.000 ; perimeter | |
| G1 X10.133 Y-10.738 E647.41342 ; perimeter | |
| G1 X10.655 Y-10.738 E647.42472 ; perimeter | |
| G1 X10.655 Y-3.312 E647.58547 ; perimeter | |
| G1 X10.590 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.554 Y-2.674 E647.60790 F4800.000 ; perimeter | |
| G1 X9.554 Y-11.316 E647.79500 ; perimeter | |
| G1 X11.233 Y-11.316 E647.83134 ; perimeter | |
| G1 X11.233 Y-1.326 E648.04760 ; perimeter | |
| G1 X19.341 Y-1.326 E648.22313 ; perimeter | |
| G1 X19.341 Y2.316 E648.30199 ; perimeter | |
| G1 X10.590 Y2.316 E648.49143 ; perimeter | |
| G1 X10.590 Y-2.614 E648.59816 ; perimeter | |
| G1 X10.112 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.076 Y-2.195 E648.61283 F1200.000 ; perimeter | |
| G1 X9.076 Y-11.795 E648.74881 ; perimeter | |
| G1 X11.712 Y-11.795 E648.78614 ; perimeter | |
| G1 X11.712 Y-1.805 E648.92764 ; perimeter | |
| G1 X19.820 Y-1.805 E649.04249 ; perimeter | |
| G1 X19.820 Y2.795 E649.10764 ; perimeter | |
| G1 X10.112 Y2.795 E649.24515 ; perimeter | |
| G1 X10.112 Y-2.135 E649.31498 ; perimeter | |
| G1 X10.112 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.037 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E649.50757 F600.000 ; fill | |
| M73 P29 ; update progress | |
| G1 F2100.000 E644.50757 ; retract | |
| G1 Z6.000 F7800.000 ; move to next layer (19) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E649.50757 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E649.50818 F600.000 ; support material | |
| G1 X18.859 Y3.974 E649.52720 ; support material | |
| G1 X18.859 Y4.016 E649.52781 ; support material | |
| G1 X20.201 Y4.016 E649.54683 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E649.55816 F600.000 ; support material | |
| G1 X18.480 Y3.595 E649.58791 ; support material | |
| G1 X18.480 Y4.395 E649.59924 ; support material | |
| G1 X20.580 Y4.395 E649.62898 ; support material | |
| G1 F2100.000 E644.62898 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E649.62898 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E649.63919 F600.000 ; support material | |
| G1 X20.013 Y10.899 E649.66961 ; support material | |
| G1 X17.705 Y10.831 E649.70232 ; support material | |
| G1 X16.294 Y13.116 E649.74037 ; support material | |
| G1 X21.141 Y13.116 E649.80903 ; support material | |
| G1 X21.141 Y12.595 E649.81642 ; support material | |
| G1 X20.335 Y11.098 E649.84050 ; support material | |
| G1 X21.141 Y9.792 E649.86224 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E649.90715 F600.000 ; support material | |
| G1 X12.099 Y10.855 E649.93930 ; support material | |
| G1 X13.195 Y12.888 E649.97201 ; support material | |
| G1 X13.054 Y13.116 E649.97581 ; support material | |
| G1 X13.498 Y13.116 E649.98211 ; support material | |
| G1 X13.517 Y13.087 E649.98261 ; support material | |
| G1 X14.519 Y13.116 E649.99681 ; support material | |
| G1 X15.849 Y13.116 E650.01565 ; support material | |
| G1 X17.383 Y10.632 E650.05700 ; support material | |
| G1 X16.462 Y8.924 E650.08449 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E650.14808 F600.000 ; support material | |
| G1 X9.147 Y10.389 E650.17165 ; support material | |
| G1 X7.589 Y12.912 E650.21365 ; support material | |
| G1 X5.281 Y12.844 E650.24636 ; support material | |
| G1 X5.112 Y13.116 E650.25090 ; support material | |
| G1 X7.914 Y13.116 E650.29058 ; support material | |
| G1 X9.469 Y10.588 E650.33263 ; support material | |
| G1 X11.777 Y10.656 E650.36534 ; support material | |
| G1 X12.847 Y8.924 E650.39417 ; support material | |
| G1 F2100.000 E645.39417 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E650.39417 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E650.40551 F600.000 ; support material | |
| G1 X9.236 Y3.595 E650.42454 ; support material | |
| G1 X8.851 Y4.395 E650.43711 ; support material | |
| G1 X10.580 Y4.395 E650.46160 ; support material | |
| G1 F2100.000 E645.46160 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E650.46160 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E650.46790 F600.000 ; support material | |
| G1 X3.541 Y10.413 E650.49269 ; support material | |
| G1 X1.233 Y10.345 E650.52540 ; support material | |
| G1 X-0.325 Y12.868 E650.56740 ; support material | |
| G1 X-0.191 Y13.116 E650.57140 ; support material | |
| G1 X4.668 Y13.116 E650.64022 ; support material | |
| G1 X4.959 Y12.645 E650.64806 ; support material | |
| G1 X3.863 Y10.612 E650.68077 ; support material | |
| G1 X4.906 Y8.924 E650.70888 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E650.72072 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E650.83232 ; support material | |
| G1 X-5.270 Y8.545 E650.84299 ; support material | |
| G1 X-21.520 Y8.545 E651.07316 ; support material | |
| G1 X-21.520 Y13.495 E651.14327 ; support material | |
| G1 X21.520 Y13.495 E651.75289 ; support material | |
| G1 X21.520 Y8.545 E651.82300 ; support material | |
| G1 X2.246 Y8.545 E652.09600 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E652.12779 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E652.16832 ; support material | |
| G1 X-4.372 Y10.369 E652.20492 ; support material | |
| G1 X-3.277 Y12.402 E652.23763 ; support material | |
| G1 X-3.718 Y13.116 E652.24952 ; support material | |
| G1 X-3.273 Y13.116 E652.25582 ; support material | |
| G1 X-2.955 Y12.601 E652.26441 ; support material | |
| G1 X-0.647 Y12.669 E652.29712 ; support material | |
| G1 X0.911 Y10.146 E652.33911 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E652.37240 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E652.39268 ; support material | |
| G1 X-4.891 Y8.924 E652.40335 ; support material | |
| G1 X-7.853 Y8.924 E652.44529 ; support material | |
| G1 X-7.325 Y9.903 E652.46105 ; support material | |
| G1 X-8.883 Y12.426 E652.50305 ; support material | |
| G1 X-11.191 Y12.358 E652.53576 ; support material | |
| G1 X-11.659 Y13.116 E652.54839 ; support material | |
| G1 X-8.296 Y13.116 E652.59603 ; support material | |
| G1 X-8.561 Y12.625 E652.60394 ; support material | |
| G1 X-7.003 Y10.102 E652.64594 ; support material | |
| G1 X-4.695 Y10.170 E652.67865 ; support material | |
| G1 F2100.000 E647.67865 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E652.67865 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E652.68998 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E652.71972 ; support material | |
| G1 X-11.520 Y4.395 E652.73105 ; support material | |
| G1 X-9.420 Y4.395 E652.76080 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E652.76141 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E652.78043 ; support material | |
| G1 X-11.141 Y4.016 E652.78103 ; support material | |
| G1 X-9.799 Y4.016 E652.80006 ; support material | |
| G1 F2100.000 E647.80006 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E652.80006 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E652.82007 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E652.82637 ; support material | |
| G1 X-12.930 Y9.927 E652.84308 ; support material | |
| G1 X-15.239 Y9.859 E652.87579 ; support material | |
| G1 X-16.796 Y12.382 E652.91778 ; support material | |
| G1 X-16.401 Y13.116 E652.92960 ; support material | |
| G1 X-12.104 Y13.116 E652.99046 ; support material | |
| G1 X-11.513 Y12.159 E653.00639 ; support material | |
| G1 X-12.608 Y10.126 E653.03910 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E653.05095 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E653.11178 ; support material | |
| G1 X-20.844 Y9.883 E653.12775 ; support material | |
| G1 X-19.749 Y11.916 E653.16046 ; support material | |
| G1 X-20.490 Y13.116 E653.18044 ; support material | |
| G1 X-20.045 Y13.116 E653.18674 ; support material | |
| G1 X-19.427 Y12.115 E653.20341 ; support material | |
| G1 X-17.119 Y12.183 E653.23612 ; support material | |
| G1 X-15.561 Y9.660 E653.27812 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E653.29011 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E653.29641 ; support material | |
| G1 X-21.141 Y9.644 E653.30661 ; support material | |
| G1 F2100.000 E648.30661 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E653.30661 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E653.31291 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E653.31362 ; support material | |
| G1 X-20.018 Y4.016 E653.31992 ; support material | |
| G1 X-19.991 Y3.974 E653.32064 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E653.33905 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E653.35180 ; support material | |
| G1 X-21.520 Y4.395 E653.38154 ; support material | |
| G1 X-19.420 Y4.395 E653.41129 ; support material | |
| G1 X-19.420 Y3.595 E653.42262 ; support material | |
| G1 X-20.620 Y3.595 E653.43961 ; support material | |
| M126 ; enable fan | |
| M73 P30 ; update progress | |
| G1 F2100.000 E648.43961 ; retract | |
| G1 Z6.000 F7800.000 ; move to next layer (55) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E653.43961 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E653.46838 F2007.880 ; perimeter | |
| G1 X2.240 Y-0.169 E653.91051 ; perimeter | |
| G1 X2.240 Y1.159 E653.93927 ; perimeter | |
| G1 X-18.124 Y1.159 E654.38010 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E654.43392 F2007.880 ; perimeter | |
| G1 X2.818 Y-0.748 E654.90109 ; perimeter | |
| G1 X2.818 Y1.738 E654.95491 ; perimeter | |
| G1 X-18.703 Y1.738 E655.42078 ; perimeter | |
| G1 F2100.000 E650.42078 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X3.316 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E655.42078 F2100.000 ; compensate retraction | |
| G1 X3.316 Y-10.738 E655.58283 F2007.880 ; perimeter | |
| G1 X3.869 Y-10.738 E655.59480 ; perimeter | |
| G1 X3.869 Y-3.252 E655.75685 ; perimeter | |
| G1 X3.376 Y-3.252 E655.76752 ; perimeter | |
| G1 X3.397 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.397 Y2.316 E655.87554 F2007.880 ; perimeter | |
| G1 X-19.341 Y2.316 E656.36777 ; perimeter | |
| G1 X-19.341 Y-1.326 E656.44663 ; perimeter | |
| G1 X2.737 Y-1.326 E656.92458 ; perimeter | |
| G1 X2.737 Y-11.316 E657.14084 ; perimeter | |
| G1 X4.447 Y-11.316 E657.17786 ; perimeter | |
| G1 X4.447 Y-2.674 E657.36496 ; perimeter | |
| G1 X3.457 Y-2.674 E657.38640 ; perimeter | |
| G1 X3.875 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.875 Y2.795 E657.45708 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E657.79270 ; perimeter | |
| G1 X-19.820 Y-1.805 E657.85786 ; perimeter | |
| G1 X2.259 Y-1.805 E658.17058 ; perimeter | |
| G1 X2.259 Y-11.795 E658.31208 ; perimeter | |
| G1 X4.926 Y-11.795 E658.34986 ; perimeter | |
| G1 X4.926 Y-2.195 E658.48583 ; perimeter | |
| G1 X3.935 Y-2.195 E658.49987 ; perimeter | |
| G1 X3.475 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.950 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E659.15224 F600.000 ; fill | |
| G1 F2100.000 E654.15224 ; retract | |
| G1 Z6.000 F7800.000 ; lift plate during travel | |
| G1 X11.720 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.800 F7800.000 ; restore layer Z | |
| G1 E659.15224 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E659.29217 F2007.880 ; perimeter | |
| G1 X18.184 Y1.159 E659.32093 ; perimeter | |
| G1 X11.720 Y1.159 E659.46086 ; perimeter | |
| G1 X11.720 Y-0.109 E659.48833 ; perimeter | |
| G1 X11.142 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E659.65330 F2007.880 ; perimeter | |
| G1 X18.763 Y1.738 E659.70712 ; perimeter | |
| G1 X11.142 Y1.738 E659.87209 ; perimeter | |
| G1 X11.142 Y-0.688 E659.92461 ; perimeter | |
| G1 X10.644 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.091 Y-3.252 E659.93658 F2007.880 ; perimeter | |
| G1 X10.091 Y-10.738 E660.09863 ; perimeter | |
| G1 X10.644 Y-10.738 E660.11059 ; perimeter | |
| G1 X10.644 Y-3.312 E660.27135 ; perimeter | |
| G1 X10.563 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.513 Y-2.674 E660.29409 F2007.880 ; perimeter | |
| G1 X9.513 Y-11.316 E660.48119 ; perimeter | |
| G1 X11.223 Y-11.316 E660.51821 ; perimeter | |
| G1 X11.223 Y-1.326 E660.73447 ; perimeter | |
| G1 X19.341 Y-1.326 E660.91022 ; perimeter | |
| G1 X19.341 Y2.316 E660.98908 ; perimeter | |
| G1 X10.563 Y2.316 E661.17910 ; perimeter | |
| G1 X10.563 Y-2.614 E661.28583 ; perimeter | |
| G1 X10.085 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X9.034 Y-2.195 E661.30071 F600.000 ; perimeter | |
| G1 X9.034 Y-11.795 E661.43668 ; perimeter | |
| G1 X11.701 Y-11.795 E661.47446 ; perimeter | |
| G1 X11.701 Y-1.805 E661.61596 ; perimeter | |
| G1 X19.820 Y-1.805 E661.73096 ; perimeter | |
| G1 X19.820 Y2.795 E661.79611 ; perimeter | |
| G1 X10.085 Y2.795 E661.93400 ; perimeter | |
| G1 X10.085 Y-2.135 E662.00383 ; perimeter | |
| G1 X10.085 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X12.010 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E662.19730 F600.000 ; fill | |
| M73 P30 ; update progress | |
| G1 F2100.000 E657.19730 ; retract | |
| G1 Z6.100 F7800.000 ; move to next layer (56) and lift | |
| G1 X2.266 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.900 F7800.000 ; restore layer Z | |
| G1 E662.19730 F2100.000 ; compensate retraction | |
| G1 X2.266 Y1.159 E662.22606 F2011.070 ; perimeter | |
| G1 X-18.184 Y1.159 E662.66877 ; perimeter | |
| G1 X-18.184 Y-0.169 E662.69754 ; perimeter | |
| G1 X2.206 Y-0.169 E663.13895 ; perimeter | |
| G1 X2.845 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.845 Y1.738 E663.19276 F2011.070 ; perimeter | |
| G1 X-18.763 Y1.738 E663.66052 ; perimeter | |
| G1 X-18.763 Y-0.748 E663.71433 ; perimeter | |
| G1 X2.785 Y-0.748 E664.18079 ; perimeter | |
| G1 X3.326 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.326 Y-10.738 E664.34284 F2011.070 ; perimeter | |
| G1 X3.910 Y-10.738 E664.35547 ; perimeter | |
| G1 X3.910 Y-3.252 E664.51752 ; perimeter | |
| G1 X3.386 Y-3.252 E664.52886 ; perimeter | |
| G1 X3.423 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.423 Y2.316 E664.63688 F2011.070 ; perimeter | |
| G1 X-19.341 Y2.316 E665.12969 ; perimeter | |
| G1 X-19.341 Y-1.326 E665.20855 ; perimeter | |
| G1 X2.748 Y-1.326 E665.68673 ; perimeter | |
| G1 X2.748 Y-11.316 E665.90299 ; perimeter | |
| G1 X4.489 Y-11.316 E665.94068 ; perimeter | |
| G1 X4.489 Y-2.674 E666.12778 ; perimeter | |
| G1 X3.483 Y-2.674 E666.14954 ; perimeter | |
| G1 X3.902 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.902 Y2.795 E666.22022 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E666.55622 ; perimeter | |
| G1 X-19.820 Y-1.805 E666.62137 ; perimeter | |
| G1 X2.269 Y-1.805 E666.93425 ; perimeter | |
| G1 X2.269 Y-11.795 E667.07575 ; perimeter | |
| G1 X4.967 Y-11.795 E667.11396 ; perimeter | |
| G1 X4.967 Y-2.195 E667.24993 ; perimeter | |
| G1 X3.962 Y-2.195 E667.26417 ; perimeter | |
| G1 X3.502 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X1.977 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E667.91743 F600.000 ; fill | |
| G1 F2100.000 E662.91743 ; retract | |
| G1 Z6.100 F7800.000 ; lift plate during travel | |
| G1 X11.694 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z5.900 F7800.000 ; restore layer Z | |
| G1 E667.91743 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E668.05794 F2011.070 ; perimeter | |
| G1 X18.184 Y1.159 E668.08670 ; perimeter | |
| G1 X11.694 Y1.159 E668.22721 ; perimeter | |
| G1 X11.694 Y-0.109 E668.25468 ; perimeter | |
| G1 X11.115 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E668.42023 F2011.070 ; perimeter | |
| G1 X18.763 Y1.738 E668.47405 ; perimeter | |
| G1 X11.115 Y1.738 E668.63960 ; perimeter | |
| G1 X11.115 Y-0.688 E668.69212 ; perimeter | |
| G1 X10.634 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.050 Y-3.252 E668.70475 F2011.070 ; perimeter | |
| G1 X10.050 Y-10.738 E668.86680 ; perimeter | |
| G1 X10.634 Y-10.738 E668.87944 ; perimeter | |
| G1 X10.634 Y-3.312 E669.04019 ; perimeter | |
| G1 X10.537 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.471 Y-2.674 E669.06326 F2011.070 ; perimeter | |
| G1 X9.471 Y-11.316 E669.25035 ; perimeter | |
| G1 X11.212 Y-11.316 E669.28804 ; perimeter | |
| G1 X11.212 Y-1.326 E669.50430 ; perimeter | |
| G1 X19.341 Y-1.326 E669.68028 ; perimeter | |
| G1 X19.341 Y2.316 E669.75914 ; perimeter | |
| G1 X10.537 Y2.316 E669.94974 ; perimeter | |
| G1 X10.537 Y-2.614 E670.05647 ; perimeter | |
| G1 X10.058 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.993 Y-2.195 E670.07156 F600.000 ; perimeter | |
| G1 X8.993 Y-11.795 E670.20753 ; perimeter | |
| G1 X11.691 Y-11.795 E670.24575 ; perimeter | |
| G1 X11.691 Y-1.805 E670.38724 ; perimeter | |
| G1 X19.820 Y-1.805 E670.50239 ; perimeter | |
| G1 X19.820 Y2.795 E670.56754 ; perimeter | |
| G1 X10.058 Y2.795 E670.70581 ; perimeter | |
| G1 X10.058 Y-2.135 E670.77564 ; perimeter | |
| G1 X10.058 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.983 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E670.96999 F600.000 ; fill | |
| M73 P30 ; update progress | |
| G1 F2100.000 E665.96999 ; retract | |
| G1 Z6.200 F7800.000 ; move to next layer (57) and lift | |
| G1 X2.293 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.000 F7800.000 ; restore layer Z | |
| G1 E670.96999 F2100.000 ; compensate retraction | |
| G1 X2.293 Y1.159 E670.99876 F2012.882 ; perimeter | |
| G1 X-18.184 Y1.159 E671.44205 ; perimeter | |
| G1 X-18.184 Y-0.169 E671.47081 ; perimeter | |
| G1 X2.233 Y-0.169 E671.91280 ; perimeter | |
| G1 X2.872 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.872 Y1.738 E671.96661 F2012.882 ; perimeter | |
| G1 X-18.763 Y1.738 E672.43495 ; perimeter | |
| G1 X-18.763 Y-0.748 E672.48876 ; perimeter | |
| G1 X2.812 Y-0.748 E672.95580 ; perimeter | |
| G1 X3.337 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.337 Y-10.738 E673.11785 F2012.882 ; perimeter | |
| G1 X3.923 Y-10.738 E673.13054 ; perimeter | |
| G1 X3.923 Y-3.252 E673.29259 ; perimeter | |
| G1 X3.397 Y-3.252 E673.30397 ; perimeter | |
| G1 X3.450 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.450 Y2.316 E673.41199 F2012.882 ; perimeter | |
| G1 X-19.341 Y2.316 E673.90538 ; perimeter | |
| G1 X-19.341 Y-1.326 E673.98424 ; perimeter | |
| G1 X2.758 Y-1.326 E674.46265 ; perimeter | |
| G1 X2.758 Y-11.316 E674.67891 ; perimeter | |
| G1 X4.501 Y-11.316 E674.71664 ; perimeter | |
| G1 X4.501 Y-2.674 E674.90374 ; perimeter | |
| G1 X3.510 Y-2.674 E674.92520 ; perimeter | |
| G1 X3.929 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.929 Y2.795 E674.99588 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E675.33226 ; perimeter | |
| G1 X-19.820 Y-1.805 E675.39741 ; perimeter | |
| G1 X2.280 Y-1.805 E675.71044 ; perimeter | |
| G1 X2.280 Y-11.795 E675.85193 ; perimeter | |
| G1 X4.980 Y-11.795 E675.89018 ; perimeter | |
| G1 X4.980 Y-2.195 E676.02615 ; perimeter | |
| G1 X3.989 Y-2.195 E676.04019 ; perimeter | |
| G1 X3.529 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.004 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E676.69433 F600.000 ; fill | |
| G1 F2100.000 E671.69433 ; retract | |
| G1 Z6.200 F7800.000 ; lift plate during travel | |
| G1 X11.667 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.000 F7800.000 ; restore layer Z | |
| G1 E676.69433 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E676.83542 F2012.882 ; perimeter | |
| G1 X18.184 Y1.159 E676.86418 ; perimeter | |
| G1 X11.667 Y1.159 E677.00527 ; perimeter | |
| G1 X11.667 Y-0.109 E677.03274 ; perimeter | |
| G1 X11.088 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E677.19888 F2012.882 ; perimeter | |
| G1 X18.763 Y1.738 E677.25269 ; perimeter | |
| G1 X11.088 Y1.738 E677.41882 ; perimeter | |
| G1 X11.088 Y-0.688 E677.47134 ; perimeter | |
| G1 X10.623 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.037 Y-3.252 E677.48402 F2012.882 ; perimeter | |
| G1 X10.037 Y-10.738 E677.64607 ; perimeter | |
| G1 X10.623 Y-10.738 E677.65876 ; perimeter | |
| G1 X10.623 Y-3.312 E677.81951 ; perimeter | |
| G1 X10.510 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-2.674 E677.84227 F2012.882 ; perimeter | |
| G1 X9.459 Y-11.316 E678.02936 ; perimeter | |
| G1 X11.202 Y-11.316 E678.06710 ; perimeter | |
| G1 X11.202 Y-1.326 E678.28336 ; perimeter | |
| G1 X19.341 Y-1.326 E678.45957 ; perimeter | |
| G1 X19.341 Y2.316 E678.53843 ; perimeter | |
| G1 X10.510 Y2.316 E678.72961 ; perimeter | |
| G1 X10.510 Y-2.614 E678.83633 ; perimeter | |
| G1 X10.031 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-2.195 E678.85122 F600.000 ; perimeter | |
| G1 X8.980 Y-11.795 E678.98720 ; perimeter | |
| G1 X11.680 Y-11.795 E679.02544 ; perimeter | |
| G1 X11.680 Y-1.805 E679.16694 ; perimeter | |
| G1 X19.820 Y-1.805 E679.28224 ; perimeter | |
| G1 X19.820 Y2.795 E679.34739 ; perimeter | |
| G1 X10.031 Y2.795 E679.48604 ; perimeter | |
| G1 X10.031 Y-2.135 E679.55587 ; perimeter | |
| G1 X10.031 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.956 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E679.75110 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P31 ; update progress | |
| G1 F2100.000 E674.75110 ; retract | |
| G1 Z6.300 F7800.000 ; move to next layer (58) and lift | |
| G1 X2.320 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E679.75110 F2100.000 ; compensate retraction | |
| G1 X2.320 Y1.159 E679.77986 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E680.22373 ; perimeter | |
| G1 X-18.184 Y-0.169 E680.25250 ; perimeter | |
| G1 X2.260 Y-0.169 E680.69507 ; perimeter | |
| G1 X2.898 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.898 Y1.738 E680.74888 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E681.21780 ; perimeter | |
| G1 X-18.763 Y-0.748 E681.27161 ; perimeter | |
| G1 X2.838 Y-0.748 E681.73923 ; perimeter | |
| G1 X3.350 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.350 Y-10.738 E681.90128 F4800.000 ; perimeter | |
| G1 X3.923 Y-10.738 E681.91369 ; perimeter | |
| G1 X3.923 Y-3.252 E682.07574 ; perimeter | |
| G1 X3.410 Y-3.252 E682.08685 ; perimeter | |
| G1 X3.477 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.477 Y2.316 E682.19487 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E682.68883 ; perimeter | |
| G1 X-19.341 Y-1.326 E682.76769 ; perimeter | |
| G1 X2.771 Y-1.326 E683.24638 ; perimeter | |
| G1 X2.771 Y-11.316 E683.46264 ; perimeter | |
| G1 X4.501 Y-11.316 E683.50009 ; perimeter | |
| G1 X4.501 Y-2.674 E683.68719 ; perimeter | |
| G1 X3.537 Y-2.674 E683.70807 ; perimeter | |
| G1 X3.956 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.956 Y2.795 E683.77875 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E684.11551 ; perimeter | |
| G1 X-19.820 Y-1.805 E684.18066 ; perimeter | |
| G1 X2.293 Y-1.805 E684.49387 ; perimeter | |
| G1 X2.293 Y-11.795 E684.63537 ; perimeter | |
| G1 X4.980 Y-11.795 E684.67343 ; perimeter | |
| G1 X4.980 Y-2.195 E684.80941 ; perimeter | |
| G1 X4.016 Y-2.195 E684.82307 ; perimeter | |
| G1 X3.556 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.031 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E685.47808 F600.000 ; fill | |
| G1 F2100.000 E680.47808 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X11.640 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E685.47808 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E685.61975 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E685.64852 ; perimeter | |
| G1 X11.640 Y1.159 E685.79019 ; perimeter | |
| G1 X11.640 Y-0.109 E685.81765 ; perimeter | |
| G1 X11.062 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E685.98437 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E686.03818 ; perimeter | |
| G1 X11.062 Y1.738 E686.20490 ; perimeter | |
| G1 X11.062 Y-0.688 E686.25741 ; perimeter | |
| G1 X10.610 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.037 Y-3.252 E686.26982 F4800.000 ; perimeter | |
| G1 X10.037 Y-10.738 E686.43187 ; perimeter | |
| G1 X10.610 Y-10.738 E686.44428 ; perimeter | |
| G1 X10.610 Y-3.312 E686.60503 ; perimeter | |
| G1 X10.483 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-2.674 E686.62721 F4800.000 ; perimeter | |
| G1 X9.459 Y-11.316 E686.81430 ; perimeter | |
| G1 X11.189 Y-11.316 E686.85176 ; perimeter | |
| G1 X11.189 Y-1.326 E687.06802 ; perimeter | |
| G1 X19.341 Y-1.326 E687.24450 ; perimeter | |
| G1 X19.341 Y2.316 E687.32337 ; perimeter | |
| G1 X10.483 Y2.316 E687.51513 ; perimeter | |
| G1 X10.483 Y-2.614 E687.62185 ; perimeter | |
| G1 X10.004 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-2.195 E687.63636 F1200.000 ; perimeter | |
| G1 X8.980 Y-11.795 E687.77234 ; perimeter | |
| G1 X11.667 Y-11.795 E687.81040 ; perimeter | |
| G1 X11.667 Y-1.805 E687.95190 ; perimeter | |
| G1 X19.820 Y-1.805 E688.06738 ; perimeter | |
| G1 X19.820 Y2.795 E688.13253 ; perimeter | |
| G1 X10.004 Y2.795 E688.27156 ; perimeter | |
| G1 X10.004 Y-2.135 E688.34139 ; perimeter | |
| G1 X10.004 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.929 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E688.53750 F600.000 ; fill | |
| M73 P31 ; update progress | |
| G1 F2100.000 E683.53750 ; retract | |
| G1 Z6.300 F7800.000 ; move to next layer (20) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E688.53750 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E688.53811 F600.000 ; support material | |
| G1 X18.859 Y3.974 E688.55713 ; support material | |
| G1 X18.859 Y4.016 E688.55774 ; support material | |
| G1 X20.201 Y4.016 E688.57676 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E688.58809 F600.000 ; support material | |
| G1 X18.480 Y3.595 E688.61783 ; support material | |
| G1 X18.480 Y4.395 E688.62916 ; support material | |
| G1 X20.580 Y4.395 E688.65891 ; support material | |
| G1 F2100.000 E683.65891 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E688.65891 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E688.66912 F600.000 ; support material | |
| G1 X20.013 Y10.899 E688.69954 ; support material | |
| G1 X17.705 Y10.831 E688.73225 ; support material | |
| G1 X16.294 Y13.116 E688.77029 ; support material | |
| G1 X21.141 Y13.116 E688.83896 ; support material | |
| G1 X21.141 Y12.595 E688.84635 ; support material | |
| G1 X20.335 Y11.098 E688.87043 ; support material | |
| G1 X21.141 Y9.792 E688.89217 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E688.93708 F600.000 ; support material | |
| G1 X12.099 Y10.855 E688.96923 ; support material | |
| G1 X13.195 Y12.888 E689.00194 ; support material | |
| G1 X13.054 Y13.116 E689.00574 ; support material | |
| G1 X13.498 Y13.116 E689.01204 ; support material | |
| G1 X13.517 Y13.087 E689.01253 ; support material | |
| G1 X14.519 Y13.116 E689.02674 ; support material | |
| G1 X15.849 Y13.116 E689.04557 ; support material | |
| G1 X17.383 Y10.632 E689.08693 ; support material | |
| G1 X16.462 Y8.924 E689.11441 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E689.17800 F600.000 ; support material | |
| G1 X9.147 Y10.389 E689.20158 ; support material | |
| G1 X7.589 Y12.912 E689.24358 ; support material | |
| G1 X5.281 Y12.844 E689.27629 ; support material | |
| G1 X5.112 Y13.116 E689.28083 ; support material | |
| G1 X7.914 Y13.116 E689.32051 ; support material | |
| G1 X9.469 Y10.588 E689.36255 ; support material | |
| G1 X11.777 Y10.656 E689.39526 ; support material | |
| G1 X12.847 Y8.924 E689.42410 ; support material | |
| G1 F2100.000 E684.42410 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E689.42410 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E689.43543 F600.000 ; support material | |
| G1 X9.236 Y3.595 E689.45446 ; support material | |
| G1 X8.851 Y4.395 E689.46704 ; support material | |
| G1 X10.580 Y4.395 E689.49153 ; support material | |
| G1 F2100.000 E684.49153 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E689.49153 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E689.49783 F600.000 ; support material | |
| G1 X3.541 Y10.413 E689.52262 ; support material | |
| G1 X1.233 Y10.345 E689.55533 ; support material | |
| G1 X-0.325 Y12.868 E689.59733 ; support material | |
| G1 X-0.191 Y13.116 E689.60133 ; support material | |
| G1 X4.668 Y13.116 E689.67014 ; support material | |
| G1 X4.959 Y12.645 E689.67799 ; support material | |
| G1 X3.863 Y10.612 E689.71070 ; support material | |
| G1 X4.906 Y8.924 E689.73880 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E689.75065 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E689.86225 ; support material | |
| G1 X-5.270 Y8.545 E689.87292 ; support material | |
| G1 X-21.520 Y8.545 E690.10309 ; support material | |
| G1 X-21.520 Y13.495 E690.17320 ; support material | |
| G1 X21.520 Y13.495 E690.78282 ; support material | |
| G1 X21.520 Y8.545 E690.85293 ; support material | |
| G1 X2.246 Y8.545 E691.12593 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E691.15772 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E691.19825 ; support material | |
| G1 X-4.372 Y10.369 E691.23485 ; support material | |
| G1 X-3.277 Y12.402 E691.26756 ; support material | |
| G1 X-3.718 Y13.116 E691.27945 ; support material | |
| G1 X-3.273 Y13.116 E691.28575 ; support material | |
| G1 X-2.955 Y12.601 E691.29433 ; support material | |
| G1 X-0.647 Y12.669 E691.32704 ; support material | |
| G1 X0.911 Y10.146 E691.36904 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E691.40233 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E691.42261 ; support material | |
| G1 X-4.891 Y8.924 E691.43328 ; support material | |
| G1 X-7.853 Y8.924 E691.47522 ; support material | |
| G1 X-7.325 Y9.903 E691.49098 ; support material | |
| G1 X-8.883 Y12.426 E691.53298 ; support material | |
| G1 X-11.191 Y12.358 E691.56569 ; support material | |
| G1 X-11.659 Y13.116 E691.57831 ; support material | |
| G1 X-8.296 Y13.116 E691.62596 ; support material | |
| G1 X-8.561 Y12.625 E691.63387 ; support material | |
| G1 X-7.003 Y10.102 E691.67586 ; support material | |
| G1 X-4.695 Y10.170 E691.70857 ; support material | |
| G1 F2100.000 E686.70857 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E691.70857 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E691.71990 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E691.74965 ; support material | |
| G1 X-11.520 Y4.395 E691.76098 ; support material | |
| G1 X-9.420 Y4.395 E691.79072 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E691.79133 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E691.81035 ; support material | |
| G1 X-11.141 Y4.016 E691.81096 ; support material | |
| G1 X-9.799 Y4.016 E691.82998 ; support material | |
| G1 F2100.000 E686.82998 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E691.82998 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E691.85000 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E691.85630 ; support material | |
| G1 X-12.930 Y9.927 E691.87300 ; support material | |
| G1 X-15.239 Y9.859 E691.90571 ; support material | |
| G1 X-16.796 Y12.382 E691.94771 ; support material | |
| G1 X-16.401 Y13.116 E691.95953 ; support material | |
| G1 X-12.104 Y13.116 E692.02038 ; support material | |
| G1 X-11.513 Y12.159 E692.03632 ; support material | |
| G1 X-12.608 Y10.126 E692.06903 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E692.08088 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E692.14171 ; support material | |
| G1 X-20.844 Y9.883 E692.15768 ; support material | |
| G1 X-19.749 Y11.916 E692.19039 ; support material | |
| G1 X-20.490 Y13.116 E692.21037 ; support material | |
| G1 X-20.045 Y13.116 E692.21667 ; support material | |
| G1 X-19.427 Y12.115 E692.23334 ; support material | |
| G1 X-17.119 Y12.183 E692.26605 ; support material | |
| G1 X-15.561 Y9.660 E692.30805 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E692.32003 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E692.32633 ; support material | |
| G1 X-21.141 Y9.644 E692.33653 ; support material | |
| G1 F2100.000 E687.33653 ; retract | |
| G1 Z6.300 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z6.100 F7800.000 ; restore layer Z | |
| G1 E692.33653 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E692.34283 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E692.34355 ; support material | |
| G1 X-20.018 Y4.016 E692.34985 ; support material | |
| G1 X-19.991 Y3.974 E692.35056 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E692.36898 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E692.38172 ; support material | |
| G1 X-21.520 Y4.395 E692.41147 ; support material | |
| G1 X-19.420 Y4.395 E692.44121 ; support material | |
| G1 X-19.420 Y3.595 E692.45255 ; support material | |
| G1 X-20.620 Y3.595 E692.46954 ; support material | |
| M126 ; enable fan | |
| M73 P32 ; update progress | |
| G1 F2100.000 E687.46954 ; retract | |
| G1 Z6.400 F7800.000 ; move to next layer (59) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z6.200 F7800.000 ; restore layer Z | |
| G1 E692.46954 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E692.49831 F2015.092 ; perimeter | |
| G1 X2.347 Y-0.169 E692.94276 ; perimeter | |
| G1 X2.347 Y1.159 E692.97152 ; perimeter | |
| G1 X-18.124 Y1.159 E693.41467 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E693.46848 F2015.092 ; perimeter | |
| G1 X2.925 Y-0.748 E693.93798 ; perimeter | |
| G1 X2.925 Y1.738 E693.99179 ; perimeter | |
| G1 X-18.703 Y1.738 E694.45999 ; perimeter | |
| G1 F2100.000 E689.45999 ; retract | |
| G1 Z6.400 F7800.000 ; lift plate during travel | |
| G1 X3.382 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 Z6.200 F7800.000 ; restore layer Z | |
| G1 E694.45999 F2100.000 ; compensate retraction | |
| G1 X3.382 Y-10.738 E694.62204 F2015.092 ; perimeter | |
| G1 X3.923 Y-10.738 E694.63375 ; perimeter | |
| G1 X3.923 Y-3.252 E694.79580 ; perimeter | |
| G1 X3.442 Y-3.252 E694.80620 ; perimeter | |
| G1 X3.504 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.504 Y2.316 E694.91422 F2015.092 ; perimeter | |
| G1 X-19.341 Y2.316 E695.40877 ; perimeter | |
| G1 X-19.341 Y-1.326 E695.48763 ; perimeter | |
| G1 X2.804 Y-1.326 E695.96702 ; perimeter | |
| G1 X2.804 Y-11.316 E696.18328 ; perimeter | |
| G1 X4.501 Y-11.316 E696.22003 ; perimeter | |
| G1 X4.501 Y-2.674 E696.40713 ; perimeter | |
| G1 X3.564 Y-2.674 E696.42743 ; perimeter | |
| G1 X3.982 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X3.982 Y2.795 E696.49811 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E696.83524 ; perimeter | |
| G1 X-19.820 Y-1.805 E696.90040 ; perimeter | |
| G1 X2.325 Y-1.805 E697.21406 ; perimeter | |
| G1 X2.325 Y-11.795 E697.35556 ; perimeter | |
| G1 X4.980 Y-11.795 E697.39317 ; perimeter | |
| G1 X4.980 Y-2.195 E697.52914 ; perimeter | |
| G1 X4.042 Y-2.195 E697.54242 ; perimeter | |
| G1 X3.582 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.057 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E698.19832 F600.000 ; fill | |
| G1 F2100.000 E693.19832 ; retract | |
| G1 Z6.400 F7800.000 ; lift plate during travel | |
| G1 X11.613 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.200 F7800.000 ; restore layer Z | |
| G1 E698.19832 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E698.34057 F2015.092 ; perimeter | |
| G1 X18.184 Y1.159 E698.36933 ; perimeter | |
| G1 X11.613 Y1.159 E698.51158 ; perimeter | |
| G1 X11.613 Y-0.109 E698.53905 ; perimeter | |
| G1 X11.035 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E698.70634 F2015.092 ; perimeter | |
| G1 X18.763 Y1.738 E698.76016 ; perimeter | |
| G1 X11.035 Y1.738 E698.92745 ; perimeter | |
| G1 X11.035 Y-0.688 E698.97997 ; perimeter | |
| G1 X10.578 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.037 Y-3.252 E698.99167 F2015.092 ; perimeter | |
| G1 X10.037 Y-10.738 E699.15372 ; perimeter | |
| G1 X10.578 Y-10.738 E699.16543 ; perimeter | |
| G1 X10.578 Y-3.312 E699.32618 ; perimeter | |
| G1 X10.456 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-2.674 E699.34777 F2015.092 ; perimeter | |
| G1 X9.459 Y-11.316 E699.53487 ; perimeter | |
| G1 X11.156 Y-11.316 E699.57163 ; perimeter | |
| G1 X11.156 Y-1.326 E699.78788 ; perimeter | |
| G1 X19.341 Y-1.326 E699.96507 ; perimeter | |
| G1 X19.341 Y2.316 E700.04393 ; perimeter | |
| G1 X10.456 Y2.316 E700.23628 ; perimeter | |
| G1 X10.456 Y-2.614 E700.34300 ; perimeter | |
| G1 X9.978 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-2.195 E700.35713 F600.000 ; perimeter | |
| G1 X8.980 Y-11.795 E700.49311 ; perimeter | |
| G1 X11.635 Y-11.795 E700.53071 ; perimeter | |
| G1 X11.635 Y-1.805 E700.67221 ; perimeter | |
| G1 X19.820 Y-1.805 E700.78815 ; perimeter | |
| G1 X19.820 Y2.795 E700.85330 ; perimeter | |
| G1 X9.978 Y2.795 E700.99271 ; perimeter | |
| G1 X9.978 Y-2.135 E701.06254 ; perimeter | |
| G1 X9.978 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.903 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E701.25953 F600.000 ; fill | |
| M73 P32 ; update progress | |
| G1 F2100.000 E696.25953 ; retract | |
| G1 Z6.500 F7800.000 ; move to next layer (60) and lift | |
| G1 X2.374 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.300 F7800.000 ; restore layer Z | |
| G1 E701.25953 F2100.000 ; compensate retraction | |
| G1 X2.374 Y1.159 E701.28829 F2016.118 ; perimeter | |
| G1 X-18.184 Y1.159 E701.73332 ; perimeter | |
| G1 X-18.184 Y-0.169 E701.76209 ; perimeter | |
| G1 X2.314 Y-0.169 E702.20582 ; perimeter | |
| G1 X2.952 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.952 Y1.738 E702.25963 F2016.118 ; perimeter | |
| G1 X-18.763 Y1.738 E702.72971 ; perimeter | |
| G1 X-18.763 Y-0.748 E702.78352 ; perimeter | |
| G1 X2.892 Y-0.748 E703.25230 ; perimeter | |
| G1 X3.415 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.415 Y-10.738 E703.41435 F2016.118 ; perimeter | |
| G1 X3.923 Y-10.738 E703.42535 ; perimeter | |
| G1 X3.923 Y-3.252 E703.58740 ; perimeter | |
| G1 X3.475 Y-3.252 E703.59710 ; perimeter | |
| G1 X3.531 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.531 Y2.316 E703.70512 F2016.118 ; perimeter | |
| G1 X-19.341 Y2.316 E704.20025 ; perimeter | |
| G1 X-19.341 Y-1.326 E704.27911 ; perimeter | |
| G1 X2.836 Y-1.326 E704.75920 ; perimeter | |
| G1 X2.836 Y-11.316 E704.97546 ; perimeter | |
| G1 X4.501 Y-11.316 E705.01151 ; perimeter | |
| G1 X4.501 Y-2.674 E705.19861 ; perimeter | |
| G1 X3.591 Y-2.674 E705.21833 ; perimeter | |
| G1 X4.009 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.009 Y2.795 E705.28901 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E705.62652 ; perimeter | |
| G1 X-19.820 Y-1.805 E705.69168 ; perimeter | |
| G1 X2.358 Y-1.805 E706.00581 ; perimeter | |
| G1 X2.358 Y-11.795 E706.14730 ; perimeter | |
| G1 X4.980 Y-11.795 E706.18445 ; perimeter | |
| G1 X4.980 Y-2.195 E706.32042 ; perimeter | |
| G1 X4.069 Y-2.195 E706.33332 ; perimeter | |
| G1 X3.609 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.084 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E706.99010 F600.000 ; fill | |
| G1 F2100.000 E701.99010 ; retract | |
| G1 Z6.500 F7800.000 ; lift plate during travel | |
| G1 X11.586 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.300 F7800.000 ; restore layer Z | |
| G1 E706.99010 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E707.13293 F2016.118 ; perimeter | |
| G1 X18.184 Y1.159 E707.16170 ; perimeter | |
| G1 X11.586 Y1.159 E707.30453 ; perimeter | |
| G1 X11.586 Y-0.109 E707.33199 ; perimeter | |
| G1 X11.008 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E707.49987 F2016.118 ; perimeter | |
| G1 X18.763 Y1.738 E707.55368 ; perimeter | |
| G1 X11.008 Y1.738 E707.72156 ; perimeter | |
| G1 X11.008 Y-0.688 E707.77407 ; perimeter | |
| G1 X10.545 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.037 Y-3.252 E707.78507 F2016.118 ; perimeter | |
| G1 X10.037 Y-10.738 E707.94712 ; perimeter | |
| G1 X10.545 Y-10.738 E707.95812 ; perimeter | |
| G1 X10.545 Y-3.312 E708.11887 ; perimeter | |
| G1 X10.429 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-2.674 E708.13989 F2016.118 ; perimeter | |
| G1 X9.459 Y-11.316 E708.32699 ; perimeter | |
| G1 X11.124 Y-11.316 E708.36304 ; perimeter | |
| G1 X11.124 Y-1.326 E708.57930 ; perimeter | |
| G1 X19.341 Y-1.326 E708.75719 ; perimeter | |
| G1 X19.341 Y2.316 E708.83605 ; perimeter | |
| G1 X10.429 Y2.316 E709.02898 ; perimeter | |
| G1 X10.429 Y-2.614 E709.13570 ; perimeter | |
| G1 X9.951 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-2.195 E709.14945 F600.000 ; perimeter | |
| G1 X8.980 Y-11.795 E709.28542 ; perimeter | |
| G1 X11.602 Y-11.795 E709.32257 ; perimeter | |
| G1 X11.602 Y-1.805 E709.46407 ; perimeter | |
| G1 X19.820 Y-1.805 E709.58046 ; perimeter | |
| G1 X19.820 Y2.795 E709.64562 ; perimeter | |
| G1 X9.951 Y2.795 E709.78540 ; perimeter | |
| G1 X9.951 Y-2.135 E709.85523 ; perimeter | |
| G1 X9.951 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.876 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E710.05311 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P33 ; update progress | |
| G1 F2100.000 E705.05311 ; retract | |
| G1 Z6.600 F7800.000 ; move to next layer (61) and lift | |
| G1 X2.400 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E710.05311 F2100.000 ; compensate retraction | |
| G1 X2.400 Y1.159 E710.08187 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E710.52748 ; perimeter | |
| G1 X-18.184 Y-0.169 E710.55625 ; perimeter | |
| G1 X2.340 Y-0.169 E711.00056 ; perimeter | |
| G1 X2.979 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X2.979 Y1.738 E711.05437 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E711.52503 ; perimeter | |
| G1 X-18.763 Y-0.748 E711.57884 ; perimeter | |
| G1 X2.919 Y-0.748 E712.04820 ; perimeter | |
| G1 X3.447 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X3.447 Y-10.738 E712.21025 F4800.000 ; perimeter | |
| G1 X3.923 Y-10.738 E712.22054 ; perimeter | |
| G1 X3.923 Y-3.252 E712.38259 ; perimeter | |
| G1 X3.507 Y-3.252 E712.39159 ; perimeter | |
| G1 X3.557 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X3.557 Y2.316 E712.49961 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E712.99532 ; perimeter | |
| G1 X-19.341 Y-1.326 E713.07418 ; perimeter | |
| G1 X2.869 Y-1.326 E713.55498 ; perimeter | |
| G1 X2.869 Y-11.316 E713.77124 ; perimeter | |
| G1 X4.501 Y-11.316 E713.80658 ; perimeter | |
| G1 X4.501 Y-2.674 E713.99368 ; perimeter | |
| G1 X3.617 Y-2.674 E714.01282 ; perimeter | |
| G1 X4.036 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X4.036 Y2.795 E714.08350 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E714.42139 ; perimeter | |
| G1 X-19.820 Y-1.805 E714.48655 ; perimeter | |
| G1 X2.390 Y-1.805 E714.80114 ; perimeter | |
| G1 X2.390 Y-11.795 E714.94263 ; perimeter | |
| G1 X4.980 Y-11.795 E714.97932 ; perimeter | |
| G1 X4.980 Y-2.195 E715.11529 ; perimeter | |
| G1 X4.096 Y-2.195 E715.12781 ; perimeter | |
| G1 X3.636 Y-2.195 F7800.000 ; move inwards before travel | |
| G1 X2.111 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E715.78547 F600.000 ; fill | |
| G1 F2100.000 E710.78547 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X11.560 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E715.78547 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E715.92888 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E715.95765 ; perimeter | |
| G1 X11.560 Y1.159 E716.10106 ; perimeter | |
| G1 X11.560 Y-0.109 E716.12852 ; perimeter | |
| G1 X10.981 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E716.29698 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E716.35079 ; perimeter | |
| G1 X10.981 Y1.738 E716.51925 ; perimeter | |
| G1 X10.981 Y-0.688 E716.57176 ; perimeter | |
| G1 X10.513 Y-3.252 F7800.000 ; move to first perimeter point | |
| G1 X10.037 Y-3.252 E716.58206 F4800.000 ; perimeter | |
| G1 X10.037 Y-10.738 E716.74411 ; perimeter | |
| G1 X10.513 Y-10.738 E716.75441 ; perimeter | |
| G1 X10.513 Y-3.312 E716.91516 ; perimeter | |
| G1 X10.403 Y-2.674 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-2.674 E716.93559 F4800.000 ; perimeter | |
| G1 X9.459 Y-11.316 E717.12269 ; perimeter | |
| G1 X11.091 Y-11.316 E717.15804 ; perimeter | |
| G1 X11.091 Y-1.326 E717.37430 ; perimeter | |
| G1 X19.341 Y-1.326 E717.55289 ; perimeter | |
| G1 X19.341 Y2.316 E717.63176 ; perimeter | |
| G1 X10.403 Y2.316 E717.82526 ; perimeter | |
| G1 X10.403 Y-2.614 E717.93198 ; perimeter | |
| G1 X9.924 Y-2.195 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-2.195 E717.94535 F1200.000 ; perimeter | |
| G1 X8.980 Y-11.795 E718.08133 ; perimeter | |
| G1 X11.570 Y-11.795 E718.11801 ; perimeter | |
| G1 X11.570 Y-1.805 E718.25951 ; perimeter | |
| G1 X19.820 Y-1.805 E718.37637 ; perimeter | |
| G1 X19.820 Y2.795 E718.44152 ; perimeter | |
| G1 X9.924 Y2.795 E718.58169 ; perimeter | |
| G1 X9.924 Y-2.135 E718.65152 ; perimeter | |
| G1 X9.924 Y-2.595 F7800.000 ; move inwards before travel | |
| G1 X11.849 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E718.85027 F600.000 ; fill | |
| M73 P33 ; update progress | |
| G1 F2100.000 E713.85027 ; retract | |
| G1 Z6.600 F7800.000 ; move to next layer (21) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E718.85027 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E718.85088 F600.000 ; support material | |
| G1 X18.859 Y3.974 E718.86990 ; support material | |
| G1 X18.859 Y4.016 E718.87051 ; support material | |
| G1 X20.201 Y4.016 E718.88953 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E718.90086 F600.000 ; support material | |
| G1 X18.480 Y3.595 E718.93061 ; support material | |
| G1 X18.480 Y4.395 E718.94194 ; support material | |
| G1 X20.580 Y4.395 E718.97168 ; support material | |
| G1 F2100.000 E713.97168 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E718.97168 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E718.98189 F600.000 ; support material | |
| G1 X20.013 Y10.899 E719.01231 ; support material | |
| G1 X17.705 Y10.831 E719.04502 ; support material | |
| G1 X16.294 Y13.116 E719.08307 ; support material | |
| G1 X21.141 Y13.116 E719.15173 ; support material | |
| G1 X21.141 Y12.595 E719.15912 ; support material | |
| G1 X20.335 Y11.098 E719.18320 ; support material | |
| G1 X21.141 Y9.792 E719.20494 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E719.24985 F600.000 ; support material | |
| G1 X12.099 Y10.855 E719.28200 ; support material | |
| G1 X13.195 Y12.888 E719.31471 ; support material | |
| G1 X13.054 Y13.116 E719.31851 ; support material | |
| G1 X13.498 Y13.116 E719.32481 ; support material | |
| G1 X13.517 Y13.087 E719.32531 ; support material | |
| G1 X14.519 Y13.116 E719.33951 ; support material | |
| G1 X15.849 Y13.116 E719.35834 ; support material | |
| G1 X17.383 Y10.632 E719.39970 ; support material | |
| G1 X16.462 Y8.924 E719.42719 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E719.49078 F600.000 ; support material | |
| G1 X9.147 Y10.389 E719.51435 ; support material | |
| G1 X7.589 Y12.912 E719.55635 ; support material | |
| G1 X5.281 Y12.844 E719.58906 ; support material | |
| G1 X5.112 Y13.116 E719.59360 ; support material | |
| G1 X7.914 Y13.116 E719.63328 ; support material | |
| G1 X9.469 Y10.588 E719.67533 ; support material | |
| G1 X11.777 Y10.656 E719.70804 ; support material | |
| G1 X12.847 Y8.924 E719.73687 ; support material | |
| G1 F2100.000 E714.73687 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E719.73687 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E719.74821 F600.000 ; support material | |
| G1 X9.236 Y3.595 E719.76724 ; support material | |
| G1 X8.851 Y4.395 E719.77981 ; support material | |
| G1 X10.580 Y4.395 E719.80430 ; support material | |
| G1 F2100.000 E714.80430 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E719.80430 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E719.81060 F600.000 ; support material | |
| G1 X3.541 Y10.413 E719.83539 ; support material | |
| G1 X1.233 Y10.345 E719.86810 ; support material | |
| G1 X-0.325 Y12.868 E719.91010 ; support material | |
| G1 X-0.191 Y13.116 E719.91410 ; support material | |
| G1 X4.668 Y13.116 E719.98292 ; support material | |
| G1 X4.959 Y12.645 E719.99076 ; support material | |
| G1 X3.863 Y10.612 E720.02347 ; support material | |
| G1 X4.906 Y8.924 E720.05158 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E720.06342 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E720.17502 ; support material | |
| G1 X-5.270 Y8.545 E720.18569 ; support material | |
| G1 X-21.520 Y8.545 E720.41586 ; support material | |
| G1 X-21.520 Y13.495 E720.48597 ; support material | |
| G1 X21.520 Y13.495 E721.09559 ; support material | |
| G1 X21.520 Y8.545 E721.16570 ; support material | |
| G1 X2.246 Y8.545 E721.43870 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E721.47049 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E721.51102 ; support material | |
| G1 X-4.372 Y10.369 E721.54762 ; support material | |
| G1 X-3.277 Y12.402 E721.58033 ; support material | |
| G1 X-3.718 Y13.116 E721.59222 ; support material | |
| G1 X-3.273 Y13.116 E721.59852 ; support material | |
| G1 X-2.955 Y12.601 E721.60710 ; support material | |
| G1 X-0.647 Y12.669 E721.63982 ; support material | |
| G1 X0.911 Y10.146 E721.68181 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E721.71510 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E721.73538 ; support material | |
| G1 X-4.891 Y8.924 E721.74605 ; support material | |
| G1 X-7.853 Y8.924 E721.78799 ; support material | |
| G1 X-7.325 Y9.903 E721.80375 ; support material | |
| G1 X-8.883 Y12.426 E721.84575 ; support material | |
| G1 X-11.191 Y12.358 E721.87846 ; support material | |
| G1 X-11.659 Y13.116 E721.89109 ; support material | |
| G1 X-8.296 Y13.116 E721.93873 ; support material | |
| G1 X-8.561 Y12.625 E721.94664 ; support material | |
| G1 X-7.003 Y10.102 E721.98863 ; support material | |
| G1 X-4.695 Y10.170 E722.02135 ; support material | |
| G1 F2100.000 E717.02135 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E722.02135 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E722.03268 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E722.06242 ; support material | |
| G1 X-11.520 Y4.395 E722.07375 ; support material | |
| G1 X-9.420 Y4.395 E722.10350 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E722.10410 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E722.12313 ; support material | |
| G1 X-11.141 Y4.016 E722.12373 ; support material | |
| G1 X-9.799 Y4.016 E722.14276 ; support material | |
| G1 F2100.000 E717.14276 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E722.14276 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E722.16277 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E722.16907 ; support material | |
| G1 X-12.930 Y9.927 E722.18577 ; support material | |
| G1 X-15.239 Y9.859 E722.21849 ; support material | |
| G1 X-16.796 Y12.382 E722.26048 ; support material | |
| G1 X-16.401 Y13.116 E722.27230 ; support material | |
| G1 X-12.104 Y13.116 E722.33316 ; support material | |
| G1 X-11.513 Y12.159 E722.34909 ; support material | |
| G1 X-12.608 Y10.126 E722.38180 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E722.39365 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E722.45448 ; support material | |
| G1 X-20.844 Y9.883 E722.47045 ; support material | |
| G1 X-19.749 Y11.916 E722.50316 ; support material | |
| G1 X-20.490 Y13.116 E722.52314 ; support material | |
| G1 X-20.045 Y13.116 E722.52944 ; support material | |
| G1 X-19.427 Y12.115 E722.54611 ; support material | |
| G1 X-17.119 Y12.183 E722.57882 ; support material | |
| G1 X-15.561 Y9.660 E722.62082 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E722.63281 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E722.63910 ; support material | |
| G1 X-21.141 Y9.644 E722.64931 ; support material | |
| G1 F2100.000 E717.64931 ; retract | |
| G1 Z6.600 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z6.400 F7800.000 ; restore layer Z | |
| G1 E722.64931 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E722.65561 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E722.65632 ; support material | |
| G1 X-20.018 Y4.016 E722.66262 ; support material | |
| G1 X-19.991 Y3.974 E722.66334 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E722.68175 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E722.69450 ; support material | |
| G1 X-21.520 Y4.395 E722.72424 ; support material | |
| G1 X-19.420 Y4.395 E722.75399 ; support material | |
| G1 X-19.420 Y3.595 E722.76532 ; support material | |
| G1 X-20.620 Y3.595 E722.78231 ; support material | |
| M126 ; enable fan | |
| M73 P33 ; update progress | |
| G1 F2100.000 E717.78231 ; retract | |
| G1 Z6.700 F7800.000 ; move to next layer (62) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z6.500 F7800.000 ; restore layer Z | |
| G1 E722.78231 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E722.81108 F2213.039 ; perimeter | |
| G1 X2.427 Y-0.169 E723.25727 ; perimeter | |
| G1 X2.427 Y1.159 E723.28603 ; perimeter | |
| G1 X-18.124 Y1.159 E723.73092 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E723.78474 F2213.039 ; perimeter | |
| G1 X3.006 Y-0.748 E724.25597 ; perimeter | |
| G1 X3.006 Y1.738 E724.30979 ; perimeter | |
| G1 X-18.703 Y1.738 E724.77972 ; perimeter | |
| G1 X2.901 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.901 Y-11.316 E724.99598 F2213.039 ; perimeter | |
| G1 X4.501 Y-11.316 E725.03063 ; perimeter | |
| G1 X4.501 Y-2.674 E725.21772 ; perimeter | |
| G1 X3.584 Y-2.674 E725.23758 ; perimeter | |
| G1 X3.584 Y2.316 E725.34560 ; perimeter | |
| G1 X-19.341 Y2.316 E725.84189 ; perimeter | |
| G1 X-19.341 Y-1.326 E725.92075 ; perimeter | |
| G1 X2.841 Y-1.326 E726.40095 ; perimeter | |
| G1 X2.423 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.423 Y-11.795 E726.54245 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E726.57867 ; perimeter | |
| G1 X4.980 Y-2.195 E726.71465 ; perimeter | |
| G1 X4.063 Y-2.195 E726.72764 ; perimeter | |
| G1 X4.063 Y2.795 E726.79832 ; perimeter | |
| G1 X-19.820 Y2.795 E727.13659 ; perimeter | |
| G1 X-19.820 Y-1.805 E727.20175 ; perimeter | |
| G1 X2.363 Y-1.805 E727.51595 ; perimeter | |
| G1 X2.823 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.138 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E728.17449 F600.000 ; fill | |
| G1 F2100.000 E723.17449 ; retract | |
| G1 Z6.700 F7800.000 ; lift plate during travel | |
| G1 X3.701 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z6.500 F7800.000 ; restore layer Z | |
| G1 E728.17449 F2100.000 ; compensate retraction | |
| G1 X3.701 Y-11.027 E728.43959 F600.000 ; fill | |
| G1 F2100.000 E723.43959 ; retract | |
| G1 Z6.700 F7800.000 ; lift plate during travel | |
| G1 X11.533 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.500 F7800.000 ; restore layer Z | |
| G1 E728.43959 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E728.58357 F2213.039 ; perimeter | |
| G1 X18.184 Y1.159 E728.61234 ; perimeter | |
| G1 X11.533 Y1.159 E728.75633 ; perimeter | |
| G1 X11.533 Y-0.109 E728.78379 ; perimeter | |
| G1 X10.954 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E728.95283 F2213.039 ; perimeter | |
| G1 X18.763 Y1.738 E729.00664 ; perimeter | |
| G1 X10.954 Y1.738 E729.17568 ; perimeter | |
| G1 X10.954 Y-0.688 E729.22819 ; perimeter | |
| G1 X11.059 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E729.40749 F2213.039 ; perimeter | |
| G1 X19.341 Y2.316 E729.48635 ; perimeter | |
| G1 X10.376 Y2.316 E729.68044 ; perimeter | |
| G1 X10.376 Y-2.674 E729.78846 ; perimeter | |
| G1 X9.459 Y-2.674 E729.80832 ; perimeter | |
| G1 X9.459 Y-11.316 E729.99542 ; perimeter | |
| G1 X11.059 Y-11.316 E730.03006 ; perimeter | |
| G1 X11.059 Y-1.386 E730.24502 ; perimeter | |
| G1 X11.537 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E730.36233 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E730.42749 ; perimeter | |
| G1 X9.897 Y2.795 E730.56803 ; perimeter | |
| G1 X9.897 Y-2.195 E730.63871 ; perimeter | |
| G1 X8.980 Y-2.195 E730.65171 ; perimeter | |
| G1 X8.980 Y-11.795 E730.78768 ; perimeter | |
| G1 X11.537 Y-11.795 E730.82390 ; perimeter | |
| G1 X11.537 Y-1.865 E730.96455 ; perimeter | |
| G1 X11.537 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.259 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.259 Y-11.027 E731.22965 F600.000 ; fill | |
| G1 X11.822 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E731.42929 F600.000 ; fill | |
| M73 P34 ; update progress | |
| G1 F2100.000 E726.42929 ; retract | |
| G1 Z6.800 F7800.000 ; move to next layer (63) and lift | |
| G1 X2.454 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.600 F7800.000 ; restore layer Z | |
| G1 E731.42929 F2100.000 ; compensate retraction | |
| G1 X2.454 Y1.159 E731.45805 F2214.325 ; perimeter | |
| G1 X-18.184 Y1.159 E731.90482 ; perimeter | |
| G1 X-18.184 Y-0.169 E731.93359 ; perimeter | |
| G1 X2.394 Y-0.169 E732.37906 ; perimeter | |
| G1 X3.032 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.032 Y1.738 E732.43287 F2214.325 ; perimeter | |
| G1 X-18.763 Y1.738 E732.90469 ; perimeter | |
| G1 X-18.763 Y-0.748 E732.95850 ; perimeter | |
| G1 X2.972 Y-0.748 E733.42902 ; perimeter | |
| G1 X2.934 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.934 Y-11.316 E733.64528 F2214.325 ; perimeter | |
| G1 X4.501 Y-11.316 E733.67922 ; perimeter | |
| G1 X4.501 Y-2.674 E733.86631 ; perimeter | |
| G1 X3.611 Y-2.674 E733.88559 ; perimeter | |
| G1 X3.611 Y2.316 E733.99361 ; perimeter | |
| G1 X-19.341 Y2.316 E734.49048 ; perimeter | |
| G1 X-19.341 Y-1.326 E734.56934 ; perimeter | |
| G1 X2.874 Y-1.326 E735.05024 ; perimeter | |
| G1 X2.455 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.455 Y-11.795 E735.19174 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E735.22750 ; perimeter | |
| G1 X4.980 Y-2.195 E735.36348 ; perimeter | |
| G1 X4.090 Y-2.195 E735.37609 ; perimeter | |
| G1 X4.090 Y2.795 E735.44677 ; perimeter | |
| G1 X-19.820 Y2.795 E735.78543 ; perimeter | |
| G1 X-19.820 Y-1.805 E735.85058 ; perimeter | |
| G1 X2.395 Y-1.805 E736.16524 ; perimeter | |
| G1 X2.855 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.165 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E736.82466 F600.000 ; fill | |
| G1 F2100.000 E731.82466 ; retract | |
| G1 Z6.800 F7800.000 ; lift plate during travel | |
| G1 X3.718 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z6.600 F7800.000 ; restore layer Z | |
| G1 E736.82466 F2100.000 ; compensate retraction | |
| G1 X3.718 Y-11.027 E737.08976 F600.000 ; fill | |
| G1 F2100.000 E732.08976 ; retract | |
| G1 Z6.800 F7800.000 ; lift plate during travel | |
| G1 X11.506 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.600 F7800.000 ; restore layer Z | |
| G1 E737.08976 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E737.23433 F2214.325 ; perimeter | |
| G1 X18.184 Y1.159 E737.26309 ; perimeter | |
| G1 X11.506 Y1.159 E737.40766 ; perimeter | |
| G1 X11.506 Y-0.109 E737.43513 ; perimeter | |
| G1 X10.928 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E737.60474 F2214.325 ; perimeter | |
| G1 X18.763 Y1.738 E737.65856 ; perimeter | |
| G1 X10.928 Y1.738 E737.82817 ; perimeter | |
| G1 X10.928 Y-0.688 E737.88069 ; perimeter | |
| G1 X11.026 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E738.06069 F2214.325 ; perimeter | |
| G1 X19.341 Y2.316 E738.13955 ; perimeter | |
| G1 X10.349 Y2.316 E738.33422 ; perimeter | |
| G1 X10.349 Y-2.674 E738.44224 ; perimeter | |
| G1 X9.459 Y-2.674 E738.46151 ; perimeter | |
| G1 X9.459 Y-11.316 E738.64861 ; perimeter | |
| G1 X11.026 Y-11.316 E738.68255 ; perimeter | |
| G1 X11.026 Y-1.386 E738.89751 ; perimeter | |
| G1 X11.505 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E739.01529 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E739.08044 ; perimeter | |
| G1 X9.870 Y2.795 E739.22137 ; perimeter | |
| G1 X9.870 Y-2.195 E739.29205 ; perimeter | |
| G1 X8.980 Y-2.195 E739.30466 ; perimeter | |
| G1 X8.980 Y-11.795 E739.44064 ; perimeter | |
| G1 X11.505 Y-11.795 E739.47640 ; perimeter | |
| G1 X11.505 Y-1.865 E739.61705 ; perimeter | |
| G1 X11.505 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.242 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.242 Y-11.027 E739.88215 F600.000 ; fill | |
| G1 X11.795 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E740.08266 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P34 ; update progress | |
| G1 F2100.000 E735.08266 ; retract | |
| G1 Z6.900 F7800.000 ; move to next layer (64) and lift | |
| G1 X2.552 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E740.08266 F2100.000 ; compensate retraction | |
| G1 X2.552 Y1.159 E740.11143 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E740.56032 ; perimeter | |
| G1 X-18.184 Y-0.169 E740.58908 ; perimeter | |
| G1 X2.492 Y-0.169 E741.03667 ; perimeter | |
| G1 X3.130 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X3.130 Y1.738 E741.09048 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E741.56442 ; perimeter | |
| G1 X-18.763 Y-0.748 E741.61823 ; perimeter | |
| G1 X3.070 Y-0.748 E742.09087 ; perimeter | |
| G1 X2.966 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.966 Y-11.316 E742.30713 F4800.000 ; perimeter | |
| G1 X4.501 Y-11.316 E742.34036 ; perimeter | |
| G1 X4.501 Y-2.674 E742.52746 ; perimeter | |
| G1 X3.709 Y-2.674 E742.54462 ; perimeter | |
| G1 X3.709 Y2.316 E742.65264 ; perimeter | |
| G1 X-19.341 Y2.316 E743.15162 ; perimeter | |
| G1 X-19.341 Y-1.326 E743.23048 ; perimeter | |
| G1 X2.906 Y-1.326 E743.71209 ; perimeter | |
| G1 X2.488 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.488 Y-11.795 E743.85359 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E743.88889 ; perimeter | |
| G1 X4.980 Y-2.195 E744.02487 ; perimeter | |
| G1 X4.187 Y-2.195 E744.03609 ; perimeter | |
| G1 X4.187 Y2.795 E744.10677 ; perimeter | |
| G1 X-19.820 Y2.795 E744.44682 ; perimeter | |
| G1 X-19.820 Y-1.805 E744.51197 ; perimeter | |
| G1 X2.428 Y-1.805 E744.82709 ; perimeter | |
| G1 X2.888 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.262 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E745.48973 F600.000 ; fill | |
| G1 F2100.000 E740.48973 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X3.734 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E745.48973 F2100.000 ; compensate retraction | |
| G1 X3.734 Y-11.027 E745.75483 F600.000 ; fill | |
| G1 F2100.000 E740.75483 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X11.408 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E745.75483 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E745.90151 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E745.93028 ; perimeter | |
| G1 X11.408 Y1.159 E746.07697 ; perimeter | |
| G1 X11.408 Y-0.109 E746.10443 ; perimeter | |
| G1 X10.830 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E746.27617 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E746.32998 ; perimeter | |
| G1 X10.830 Y1.738 E746.50171 ; perimeter | |
| G1 X10.830 Y-0.688 E746.55423 ; perimeter | |
| G1 X10.994 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E746.73493 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E746.81380 ; perimeter | |
| G1 X10.251 Y2.316 E747.01058 ; perimeter | |
| G1 X10.251 Y-2.674 E747.11860 ; perimeter | |
| G1 X9.459 Y-2.674 E747.13576 ; perimeter | |
| G1 X9.459 Y-11.316 E747.32286 ; perimeter | |
| G1 X10.994 Y-11.316 E747.35609 ; perimeter | |
| G1 X10.994 Y-1.386 E747.57105 ; perimeter | |
| G1 X11.472 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E747.68929 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E747.75444 ; perimeter | |
| G1 X9.773 Y2.795 E747.89676 ; perimeter | |
| G1 X9.773 Y-2.195 E747.96743 ; perimeter | |
| G1 X8.980 Y-2.195 E747.97866 ; perimeter | |
| G1 X8.980 Y-11.795 E748.11464 ; perimeter | |
| G1 X11.472 Y-11.795 E748.14994 ; perimeter | |
| G1 X11.472 Y-1.865 E748.29059 ; perimeter | |
| G1 X11.472 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.226 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.226 Y-11.027 E748.55569 F600.000 ; fill | |
| G1 X11.697 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E748.75942 F600.000 ; fill | |
| M73 P35 ; update progress | |
| G1 F2100.000 E743.75942 ; retract | |
| G1 Z6.900 F7800.000 ; move to next layer (22) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E748.75942 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E748.76003 F600.000 ; support material | |
| G1 X18.859 Y3.974 E748.77905 ; support material | |
| G1 X18.859 Y4.016 E748.77966 ; support material | |
| G1 X20.201 Y4.016 E748.79868 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E748.81001 F600.000 ; support material | |
| G1 X18.480 Y3.595 E748.83975 ; support material | |
| G1 X18.480 Y4.395 E748.85109 ; support material | |
| G1 X20.580 Y4.395 E748.88083 ; support material | |
| G1 F2100.000 E743.88083 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E748.88083 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E748.89104 F600.000 ; support material | |
| G1 X20.013 Y10.899 E748.92146 ; support material | |
| G1 X17.705 Y10.831 E748.95417 ; support material | |
| G1 X16.294 Y13.116 E748.99222 ; support material | |
| G1 X21.141 Y13.116 E749.06088 ; support material | |
| G1 X21.141 Y12.595 E749.06827 ; support material | |
| G1 X20.335 Y11.098 E749.09235 ; support material | |
| G1 X21.141 Y9.792 E749.11409 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E749.15900 F600.000 ; support material | |
| G1 X12.099 Y10.855 E749.19115 ; support material | |
| G1 X13.195 Y12.888 E749.22386 ; support material | |
| G1 X13.054 Y13.116 E749.22766 ; support material | |
| G1 X13.498 Y13.116 E749.23396 ; support material | |
| G1 X13.517 Y13.087 E749.23445 ; support material | |
| G1 X14.519 Y13.116 E749.24866 ; support material | |
| G1 X15.849 Y13.116 E749.26749 ; support material | |
| G1 X17.383 Y10.632 E749.30885 ; support material | |
| G1 X16.462 Y8.924 E749.33634 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E749.39993 F600.000 ; support material | |
| G1 X9.147 Y10.389 E749.42350 ; support material | |
| G1 X7.589 Y12.912 E749.46550 ; support material | |
| G1 X5.281 Y12.844 E749.49821 ; support material | |
| G1 X5.112 Y13.116 E749.50275 ; support material | |
| G1 X7.914 Y13.116 E749.54243 ; support material | |
| G1 X9.469 Y10.588 E749.58447 ; support material | |
| G1 X11.777 Y10.656 E749.61718 ; support material | |
| G1 X12.847 Y8.924 E749.64602 ; support material | |
| G1 F2100.000 E744.64602 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E749.64602 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E749.65735 F600.000 ; support material | |
| G1 X9.236 Y3.595 E749.67638 ; support material | |
| G1 X8.851 Y4.395 E749.68896 ; support material | |
| G1 X10.580 Y4.395 E749.71345 ; support material | |
| G1 F2100.000 E744.71345 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E749.71345 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E749.71975 F600.000 ; support material | |
| G1 X3.541 Y10.413 E749.74454 ; support material | |
| G1 X1.233 Y10.345 E749.77725 ; support material | |
| G1 X-0.325 Y12.868 E749.81925 ; support material | |
| G1 X-0.191 Y13.116 E749.82325 ; support material | |
| G1 X4.668 Y13.116 E749.89206 ; support material | |
| G1 X4.959 Y12.645 E749.89991 ; support material | |
| G1 X3.863 Y10.612 E749.93262 ; support material | |
| G1 X4.906 Y8.924 E749.96073 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E749.97257 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E750.08417 ; support material | |
| G1 X-5.270 Y8.545 E750.09484 ; support material | |
| G1 X-21.520 Y8.545 E750.32501 ; support material | |
| G1 X-21.520 Y13.495 E750.39512 ; support material | |
| G1 X21.520 Y13.495 E751.00474 ; support material | |
| G1 X21.520 Y8.545 E751.07485 ; support material | |
| G1 X2.246 Y8.545 E751.34785 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E751.37964 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E751.42017 ; support material | |
| G1 X-4.372 Y10.369 E751.45677 ; support material | |
| G1 X-3.277 Y12.402 E751.48948 ; support material | |
| G1 X-3.718 Y13.116 E751.50137 ; support material | |
| G1 X-3.273 Y13.116 E751.50767 ; support material | |
| G1 X-2.955 Y12.601 E751.51625 ; support material | |
| G1 X-0.647 Y12.669 E751.54896 ; support material | |
| G1 X0.911 Y10.146 E751.59096 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E751.62425 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E751.64453 ; support material | |
| G1 X-4.891 Y8.924 E751.65520 ; support material | |
| G1 X-7.853 Y8.924 E751.69714 ; support material | |
| G1 X-7.325 Y9.903 E751.71290 ; support material | |
| G1 X-8.883 Y12.426 E751.75490 ; support material | |
| G1 X-11.191 Y12.358 E751.78761 ; support material | |
| G1 X-11.659 Y13.116 E751.80024 ; support material | |
| G1 X-8.296 Y13.116 E751.84788 ; support material | |
| G1 X-8.561 Y12.625 E751.85579 ; support material | |
| G1 X-7.003 Y10.102 E751.89778 ; support material | |
| G1 X-4.695 Y10.170 E751.93049 ; support material | |
| G1 F2100.000 E746.93049 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E751.93049 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E751.94183 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E751.97157 ; support material | |
| G1 X-11.520 Y4.395 E751.98290 ; support material | |
| G1 X-9.420 Y4.395 E752.01265 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E752.01325 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E752.03227 ; support material | |
| G1 X-11.141 Y4.016 E752.03288 ; support material | |
| G1 X-9.799 Y4.016 E752.05190 ; support material | |
| G1 F2100.000 E747.05190 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E752.05190 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E752.07192 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E752.07822 ; support material | |
| G1 X-12.930 Y9.927 E752.09492 ; support material | |
| G1 X-15.239 Y9.859 E752.12763 ; support material | |
| G1 X-16.796 Y12.382 E752.16963 ; support material | |
| G1 X-16.401 Y13.116 E752.18145 ; support material | |
| G1 X-12.104 Y13.116 E752.24231 ; support material | |
| G1 X-11.513 Y12.159 E752.25824 ; support material | |
| G1 X-12.608 Y10.126 E752.29095 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E752.30280 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E752.36363 ; support material | |
| G1 X-20.844 Y9.883 E752.37960 ; support material | |
| G1 X-19.749 Y11.916 E752.41231 ; support material | |
| G1 X-20.490 Y13.116 E752.43229 ; support material | |
| G1 X-20.045 Y13.116 E752.43859 ; support material | |
| G1 X-19.427 Y12.115 E752.45526 ; support material | |
| G1 X-17.119 Y12.183 E752.48797 ; support material | |
| G1 X-15.561 Y9.660 E752.52997 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E752.54196 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E752.54825 ; support material | |
| G1 X-21.141 Y9.644 E752.55845 ; support material | |
| G1 F2100.000 E747.55845 ; retract | |
| G1 Z6.900 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z6.700 F7800.000 ; restore layer Z | |
| G1 E752.55845 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E752.56476 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E752.56547 ; support material | |
| G1 X-20.018 Y4.016 E752.57177 ; support material | |
| G1 X-19.991 Y3.974 E752.57249 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E752.59090 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E752.60365 ; support material | |
| G1 X-21.520 Y4.395 E752.63339 ; support material | |
| G1 X-19.420 Y4.395 E752.66314 ; support material | |
| G1 X-19.420 Y3.595 E752.67447 ; support material | |
| G1 X-20.620 Y3.595 E752.69146 ; support material | |
| M126 ; enable fan | |
| M73 P35 ; update progress | |
| G1 F2100.000 E747.69146 ; retract | |
| G1 Z7.000 F7800.000 ; move to next layer (65) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z6.800 F7800.000 ; restore layer Z | |
| G1 E752.69146 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E752.72023 F2223.822 ; perimeter | |
| G1 X2.652 Y-0.169 E753.17128 ; perimeter | |
| G1 X2.652 Y1.159 E753.20005 ; perimeter | |
| G1 X-18.124 Y1.159 E753.64980 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E753.70361 F2223.822 ; perimeter | |
| G1 X3.230 Y-0.748 E754.17971 ; perimeter | |
| G1 X3.230 Y1.738 E754.23352 ; perimeter | |
| G1 X-18.703 Y1.738 E754.70833 ; perimeter | |
| G1 X2.999 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X2.999 Y-11.316 E754.92459 F2223.822 ; perimeter | |
| G1 X4.501 Y-11.316 E754.95712 ; perimeter | |
| G1 X4.501 Y-2.674 E755.14422 ; perimeter | |
| G1 X3.809 Y-2.674 E755.15921 ; perimeter | |
| G1 X3.809 Y2.316 E755.26723 ; perimeter | |
| G1 X-19.341 Y2.316 E755.76838 ; perimeter | |
| G1 X-19.341 Y-1.326 E755.84724 ; perimeter | |
| G1 X2.939 Y-1.326 E756.32955 ; perimeter | |
| G1 X2.520 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.520 Y-11.795 E756.47105 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E756.50589 ; perimeter | |
| G1 X4.980 Y-2.195 E756.64187 ; perimeter | |
| G1 X4.287 Y-2.195 E756.65168 ; perimeter | |
| G1 X4.287 Y2.795 E756.72236 ; perimeter | |
| G1 X-19.820 Y2.795 E757.06382 ; perimeter | |
| G1 X-19.820 Y-1.805 E757.12897 ; perimeter | |
| G1 X2.460 Y-1.805 E757.44455 ; perimeter | |
| G1 X2.920 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.362 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E758.11047 F600.000 ; fill | |
| G1 F2100.000 E753.11047 ; retract | |
| G1 Z7.000 F7800.000 ; lift plate during travel | |
| G1 X3.750 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z6.800 F7800.000 ; restore layer Z | |
| G1 E758.11047 F2100.000 ; compensate retraction | |
| G1 X3.750 Y-11.027 E758.37557 F600.000 ; fill | |
| G1 F2100.000 E753.37557 ; retract | |
| G1 Z7.000 F7800.000 ; lift plate during travel | |
| G1 X11.308 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.800 F7800.000 ; restore layer Z | |
| G1 E758.37557 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E758.52443 F2223.822 ; perimeter | |
| G1 X18.184 Y1.159 E758.55319 ; perimeter | |
| G1 X11.308 Y1.159 E758.70204 ; perimeter | |
| G1 X11.308 Y-0.109 E758.72951 ; perimeter | |
| G1 X10.730 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E758.90341 F2223.822 ; perimeter | |
| G1 X18.763 Y1.738 E758.95722 ; perimeter | |
| G1 X10.730 Y1.738 E759.13112 ; perimeter | |
| G1 X10.730 Y-0.688 E759.18363 ; perimeter | |
| G1 X10.961 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E759.36504 F2223.822 ; perimeter | |
| G1 X19.341 Y2.316 E759.44390 ; perimeter | |
| G1 X10.151 Y2.316 E759.64285 ; perimeter | |
| G1 X10.151 Y-2.674 E759.75087 ; perimeter | |
| G1 X9.459 Y-2.674 E759.76587 ; perimeter | |
| G1 X9.459 Y-11.316 E759.95297 ; perimeter | |
| G1 X10.961 Y-11.316 E759.98550 ; perimeter | |
| G1 X10.961 Y-1.386 E760.20046 ; perimeter | |
| G1 X11.440 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E760.31916 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E760.38431 ; perimeter | |
| G1 X9.673 Y2.795 E760.52804 ; perimeter | |
| G1 X9.673 Y-2.195 E760.59872 ; perimeter | |
| G1 X8.980 Y-2.195 E760.60853 ; perimeter | |
| G1 X8.980 Y-11.795 E760.74450 ; perimeter | |
| G1 X11.440 Y-11.795 E760.77934 ; perimeter | |
| G1 X11.440 Y-1.865 E760.91999 ; perimeter | |
| G1 X11.440 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.210 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.210 Y-11.027 E761.18509 F600.000 ; fill | |
| G1 X11.598 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E761.39211 F600.000 ; fill | |
| M73 P35 ; update progress | |
| G1 F2100.000 E756.39211 ; retract | |
| G1 Z7.100 F7800.000 ; move to next layer (66) and lift | |
| G1 X2.752 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z6.900 F7800.000 ; restore layer Z | |
| G1 E761.39211 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E761.84533 F2228.622 ; perimeter | |
| G1 X-18.184 Y-0.169 E761.87410 ; perimeter | |
| G1 X2.752 Y-0.169 E762.32731 ; perimeter | |
| G1 X2.752 Y1.099 E762.35478 ; perimeter | |
| G1 X3.330 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E762.83304 F2228.622 ; perimeter | |
| G1 X-18.763 Y-0.748 E762.88686 ; perimeter | |
| G1 X3.330 Y-0.748 E763.36512 ; perimeter | |
| G1 X3.330 Y1.678 E763.41764 ; perimeter | |
| G1 X3.031 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.031 Y-11.316 E763.63389 F2228.622 ; perimeter | |
| G1 X4.501 Y-11.316 E763.66572 ; perimeter | |
| G1 X4.501 Y-2.674 E763.85282 ; perimeter | |
| G1 X3.909 Y-2.674 E763.86565 ; perimeter | |
| G1 X3.909 Y2.316 E763.97367 ; perimeter | |
| G1 X-19.341 Y2.316 E764.47699 ; perimeter | |
| G1 X-19.341 Y-1.326 E764.55585 ; perimeter | |
| G1 X2.971 Y-1.326 E765.03886 ; perimeter | |
| G1 X2.553 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.553 Y-11.795 E765.18036 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E765.21474 ; perimeter | |
| G1 X4.980 Y-2.195 E765.35072 ; perimeter | |
| G1 X4.387 Y-2.195 E765.35911 ; perimeter | |
| G1 X4.387 Y2.795 E765.42979 ; perimeter | |
| G1 X-19.820 Y2.795 E765.77266 ; perimeter | |
| G1 X-19.820 Y-1.805 E765.83782 ; perimeter | |
| G1 X2.493 Y-1.805 E766.15386 ; perimeter | |
| G1 X2.953 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.462 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E766.82307 F600.000 ; fill | |
| G1 F2100.000 E761.82307 ; retract | |
| G1 Z7.100 F7800.000 ; lift plate during travel | |
| G1 X3.766 Y-2.963 F7800.000 ; move to first fill point | |
| G1 Z6.900 F7800.000 ; restore layer Z | |
| G1 E766.82307 F2100.000 ; compensate retraction | |
| G1 X3.766 Y-11.027 E767.08817 F600.000 ; fill | |
| G1 F2100.000 E762.08817 ; retract | |
| G1 Z7.100 F7800.000 ; lift plate during travel | |
| G1 X11.208 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z6.900 F7800.000 ; restore layer Z | |
| G1 E767.08817 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E767.23919 F2228.622 ; perimeter | |
| G1 X18.184 Y1.159 E767.26795 ; perimeter | |
| G1 X11.208 Y1.159 E767.41897 ; perimeter | |
| G1 X11.208 Y-0.109 E767.44643 ; perimeter | |
| G1 X10.630 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E767.62250 F2228.622 ; perimeter | |
| G1 X18.763 Y1.738 E767.67631 ; perimeter | |
| G1 X10.630 Y1.738 E767.85238 ; perimeter | |
| G1 X10.630 Y-0.688 E767.90489 ; perimeter | |
| G1 X10.929 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E768.08700 F2228.622 ; perimeter | |
| G1 X19.341 Y2.316 E768.16586 ; perimeter | |
| G1 X10.051 Y2.316 E768.36698 ; perimeter | |
| G1 X10.051 Y-2.674 E768.47500 ; perimeter | |
| G1 X9.459 Y-2.674 E768.48783 ; perimeter | |
| G1 X9.459 Y-11.316 E768.67492 ; perimeter | |
| G1 X10.929 Y-11.316 E768.70675 ; perimeter | |
| G1 X10.929 Y-1.386 E768.92171 ; perimeter | |
| G1 X11.407 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E769.04087 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E769.10603 ; perimeter | |
| G1 X9.573 Y2.795 E769.25117 ; perimeter | |
| G1 X9.573 Y-2.195 E769.32185 ; perimeter | |
| G1 X8.980 Y-2.195 E769.33024 ; perimeter | |
| G1 X8.980 Y-11.795 E769.46622 ; perimeter | |
| G1 X11.407 Y-11.795 E769.50060 ; perimeter | |
| G1 X11.407 Y-1.865 E769.64125 ; perimeter | |
| G1 X11.407 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.194 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.194 Y-11.027 E769.90635 F600.000 ; fill | |
| G1 X11.498 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E770.11666 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P36 ; update progress | |
| G1 F2100.000 E765.11666 ; retract | |
| G1 Z7.200 F7800.000 ; move to next layer (67) and lift | |
| G1 X2.852 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E770.11666 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E770.57204 F4800.000 ; perimeter | |
| G1 X-18.184 Y-0.169 E770.60080 ; perimeter | |
| G1 X2.852 Y-0.169 E771.05618 ; perimeter | |
| G1 X2.852 Y1.099 E771.08365 ; perimeter | |
| G1 X3.430 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E771.56408 F4800.000 ; perimeter | |
| G1 X-18.763 Y-0.748 E771.61789 ; perimeter | |
| G1 X3.430 Y-0.748 E772.09832 ; perimeter | |
| G1 X3.430 Y1.678 E772.15084 ; perimeter | |
| G1 X3.064 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.064 Y-11.316 E772.36710 F4800.000 ; perimeter | |
| G1 X4.501 Y-11.316 E772.39822 ; perimeter | |
| G1 X4.501 Y-2.674 E772.58532 ; perimeter | |
| G1 X4.009 Y-2.674 E772.59598 ; perimeter | |
| G1 X4.009 Y2.316 E772.70401 ; perimeter | |
| G1 X-19.341 Y2.316 E773.20948 ; perimeter | |
| G1 X-19.341 Y-1.326 E773.28834 ; perimeter | |
| G1 X3.004 Y-1.326 E773.77206 ; perimeter | |
| G1 X2.585 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.585 Y-11.795 E773.91356 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E773.94748 ; perimeter | |
| G1 X4.980 Y-2.195 E774.08346 ; perimeter | |
| G1 X4.487 Y-2.195 E774.09044 ; perimeter | |
| G1 X4.487 Y2.795 E774.16111 ; perimeter | |
| G1 X-19.820 Y2.795 E774.50541 ; perimeter | |
| G1 X-19.820 Y-1.805 E774.57056 ; perimeter | |
| G1 X2.525 Y-1.805 E774.88706 ; perimeter | |
| G1 X2.985 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.562 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E775.55956 F600.000 ; fill | |
| G1 X3.536 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.536 Y-2.963 E775.57963 F600.000 ; fill | |
| G1 X3.783 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.783 Y-11.027 E775.84473 F600.000 ; fill | |
| G1 F2100.000 E770.84473 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X11.108 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E775.84473 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E775.99791 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E776.02667 ; perimeter | |
| G1 X11.108 Y1.159 E776.17986 ; perimeter | |
| G1 X11.108 Y-0.109 E776.20732 ; perimeter | |
| G1 X10.530 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E776.38555 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E776.43936 ; perimeter | |
| G1 X10.530 Y1.738 E776.61759 ; perimeter | |
| G1 X10.530 Y-0.688 E776.67011 ; perimeter | |
| G1 X10.896 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E776.85292 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E776.93178 ; perimeter | |
| G1 X9.951 Y2.316 E777.13506 ; perimeter | |
| G1 X9.951 Y-2.674 E777.24308 ; perimeter | |
| G1 X9.459 Y-2.674 E777.25375 ; perimeter | |
| G1 X9.459 Y-11.316 E777.44084 ; perimeter | |
| G1 X10.896 Y-11.316 E777.47197 ; perimeter | |
| G1 X10.896 Y-1.386 E777.68693 ; perimeter | |
| G1 X11.375 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E777.80655 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E777.87170 ; perimeter | |
| G1 X9.473 Y2.795 E778.01826 ; perimeter | |
| G1 X9.473 Y-2.195 E778.08894 ; perimeter | |
| G1 X8.980 Y-2.195 E778.09592 ; perimeter | |
| G1 X8.980 Y-11.795 E778.23189 ; perimeter | |
| G1 X11.375 Y-11.795 E778.26582 ; perimeter | |
| G1 X11.375 Y-1.865 E778.40647 ; perimeter | |
| G1 X11.375 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.177 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.177 Y-11.027 E778.67157 F600.000 ; fill | |
| G1 X10.424 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.424 Y-1.037 E778.69163 F600.000 ; fill | |
| G1 X11.398 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E778.90523 F600.000 ; fill | |
| M73 P36 ; update progress | |
| G1 F2100.000 E773.90523 ; retract | |
| G1 Z7.200 F7800.000 ; move to next layer (23) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E778.90523 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E778.90584 F600.000 ; support material | |
| G1 X18.859 Y3.974 E778.92486 ; support material | |
| G1 X18.859 Y4.016 E778.92547 ; support material | |
| G1 X20.201 Y4.016 E778.94449 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E778.95582 F600.000 ; support material | |
| G1 X18.480 Y3.595 E778.98556 ; support material | |
| G1 X18.480 Y4.395 E778.99689 ; support material | |
| G1 X20.580 Y4.395 E779.02664 ; support material | |
| G1 F2100.000 E774.02664 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E779.02664 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E779.03685 F600.000 ; support material | |
| G1 X20.013 Y10.899 E779.06727 ; support material | |
| G1 X17.705 Y10.831 E779.09998 ; support material | |
| G1 X16.294 Y13.116 E779.13802 ; support material | |
| G1 X21.141 Y13.116 E779.20669 ; support material | |
| G1 X21.141 Y12.595 E779.21408 ; support material | |
| G1 X20.335 Y11.098 E779.23816 ; support material | |
| G1 X21.141 Y9.792 E779.25990 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E779.30481 F600.000 ; support material | |
| G1 X12.099 Y10.855 E779.33696 ; support material | |
| G1 X13.195 Y12.888 E779.36967 ; support material | |
| G1 X13.054 Y13.116 E779.37347 ; support material | |
| G1 X13.498 Y13.116 E779.37977 ; support material | |
| G1 X13.517 Y13.087 E779.38026 ; support material | |
| G1 X14.519 Y13.116 E779.39447 ; support material | |
| G1 X15.849 Y13.116 E779.41330 ; support material | |
| G1 X17.383 Y10.632 E779.45466 ; support material | |
| G1 X16.462 Y8.924 E779.48214 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E779.54573 F600.000 ; support material | |
| G1 X9.147 Y10.389 E779.56931 ; support material | |
| G1 X7.589 Y12.912 E779.61131 ; support material | |
| G1 X5.281 Y12.844 E779.64402 ; support material | |
| G1 X5.112 Y13.116 E779.64856 ; support material | |
| G1 X7.914 Y13.116 E779.68824 ; support material | |
| G1 X9.469 Y10.588 E779.73028 ; support material | |
| G1 X11.777 Y10.656 E779.76299 ; support material | |
| G1 X12.847 Y8.924 E779.79183 ; support material | |
| G1 F2100.000 E774.79183 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E779.79183 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E779.80316 F600.000 ; support material | |
| G1 X9.236 Y3.595 E779.82219 ; support material | |
| G1 X8.851 Y4.395 E779.83477 ; support material | |
| G1 X10.580 Y4.395 E779.85926 ; support material | |
| G1 F2100.000 E774.85926 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E779.85926 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E779.86556 F600.000 ; support material | |
| G1 X3.541 Y10.413 E779.89035 ; support material | |
| G1 X1.233 Y10.345 E779.92306 ; support material | |
| G1 X-0.325 Y12.868 E779.96506 ; support material | |
| G1 X-0.191 Y13.116 E779.96906 ; support material | |
| G1 X4.668 Y13.116 E780.03787 ; support material | |
| G1 X4.959 Y12.645 E780.04572 ; support material | |
| G1 X3.863 Y10.612 E780.07843 ; support material | |
| G1 X4.906 Y8.924 E780.10653 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E780.11838 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E780.22998 ; support material | |
| G1 X-5.270 Y8.545 E780.24065 ; support material | |
| G1 X-21.520 Y8.545 E780.47082 ; support material | |
| G1 X-21.520 Y13.495 E780.54093 ; support material | |
| G1 X21.520 Y13.495 E781.15055 ; support material | |
| G1 X21.520 Y8.545 E781.22066 ; support material | |
| G1 X2.246 Y8.545 E781.49366 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E781.52545 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E781.56598 ; support material | |
| G1 X-4.372 Y10.369 E781.60258 ; support material | |
| G1 X-3.277 Y12.402 E781.63529 ; support material | |
| G1 X-3.718 Y13.116 E781.64718 ; support material | |
| G1 X-3.273 Y13.116 E781.65348 ; support material | |
| G1 X-2.955 Y12.601 E781.66206 ; support material | |
| G1 X-0.647 Y12.669 E781.69477 ; support material | |
| G1 X0.911 Y10.146 E781.73677 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E781.77006 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E781.79034 ; support material | |
| G1 X-4.891 Y8.924 E781.80101 ; support material | |
| G1 X-7.853 Y8.924 E781.84295 ; support material | |
| G1 X-7.325 Y9.903 E781.85871 ; support material | |
| G1 X-8.883 Y12.426 E781.90071 ; support material | |
| G1 X-11.191 Y12.358 E781.93342 ; support material | |
| G1 X-11.659 Y13.116 E781.94604 ; support material | |
| G1 X-8.296 Y13.116 E781.99369 ; support material | |
| G1 X-8.561 Y12.625 E782.00160 ; support material | |
| G1 X-7.003 Y10.102 E782.04359 ; support material | |
| G1 X-4.695 Y10.170 E782.07630 ; support material | |
| G1 F2100.000 E777.07630 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E782.07630 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E782.08763 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E782.11738 ; support material | |
| G1 X-11.520 Y4.395 E782.12871 ; support material | |
| G1 X-9.420 Y4.395 E782.15845 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E782.15906 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E782.17808 ; support material | |
| G1 X-11.141 Y4.016 E782.17869 ; support material | |
| G1 X-9.799 Y4.016 E782.19771 ; support material | |
| G1 F2100.000 E777.19771 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E782.19771 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E782.21773 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E782.22403 ; support material | |
| G1 X-12.930 Y9.927 E782.24073 ; support material | |
| G1 X-15.239 Y9.859 E782.27344 ; support material | |
| G1 X-16.796 Y12.382 E782.31544 ; support material | |
| G1 X-16.401 Y13.116 E782.32726 ; support material | |
| G1 X-12.104 Y13.116 E782.38811 ; support material | |
| G1 X-11.513 Y12.159 E782.40405 ; support material | |
| G1 X-12.608 Y10.126 E782.43676 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E782.44861 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E782.50944 ; support material | |
| G1 X-20.844 Y9.883 E782.52541 ; support material | |
| G1 X-19.749 Y11.916 E782.55812 ; support material | |
| G1 X-20.490 Y13.116 E782.57810 ; support material | |
| G1 X-20.045 Y13.116 E782.58440 ; support material | |
| G1 X-19.427 Y12.115 E782.60107 ; support material | |
| G1 X-17.119 Y12.183 E782.63378 ; support material | |
| G1 X-15.561 Y9.660 E782.67578 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E782.68776 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E782.69406 ; support material | |
| G1 X-21.141 Y9.644 E782.70426 ; support material | |
| G1 F2100.000 E777.70426 ; retract | |
| G1 Z7.200 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z7.000 F7800.000 ; restore layer Z | |
| G1 E782.70426 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E782.71056 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E782.71128 ; support material | |
| G1 X-20.018 Y4.016 E782.71758 ; support material | |
| G1 X-19.991 Y3.974 E782.71829 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E782.73671 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E782.74945 ; support material | |
| G1 X-21.520 Y4.395 E782.77920 ; support material | |
| G1 X-19.420 Y4.395 E782.80894 ; support material | |
| G1 X-19.420 Y3.595 E782.82028 ; support material | |
| G1 X-20.620 Y3.595 E782.83727 ; support material | |
| M126 ; enable fan | |
| M73 P37 ; update progress | |
| G1 F2100.000 E777.83727 ; retract | |
| G1 Z7.300 F7800.000 ; move to next layer (68) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.100 F7800.000 ; restore layer Z | |
| G1 E782.83727 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E782.86604 F2299.841 ; perimeter | |
| G1 X2.952 Y-0.169 E783.32358 ; perimeter | |
| G1 X2.952 Y1.159 E783.35235 ; perimeter | |
| G1 X-18.124 Y1.159 E783.80860 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E783.86241 F2299.841 ; perimeter | |
| G1 X3.530 Y-0.748 E784.34500 ; perimeter | |
| G1 X3.530 Y1.738 E784.39882 ; perimeter | |
| G1 X-18.703 Y1.738 E784.88011 ; perimeter | |
| G1 X3.100 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.100 Y-11.316 E785.09637 F2299.841 ; perimeter | |
| G1 X4.501 Y-11.316 E785.12670 ; perimeter | |
| G1 X4.501 Y-2.674 E785.31380 ; perimeter | |
| G1 X4.109 Y-2.674 E785.32230 ; perimeter | |
| G1 X4.109 Y2.316 E785.43032 ; perimeter | |
| G1 X-19.341 Y2.316 E785.93797 ; perimeter | |
| G1 X-19.341 Y-1.326 E786.01683 ; perimeter | |
| G1 X3.040 Y-1.326 E786.50134 ; perimeter | |
| G1 X2.622 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.622 Y-11.795 E786.64284 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E786.67624 ; perimeter | |
| G1 X4.980 Y-2.195 E786.81221 ; perimeter | |
| G1 X4.587 Y-2.195 E786.81778 ; perimeter | |
| G1 X4.587 Y2.795 E786.88845 ; perimeter | |
| G1 X-19.820 Y2.795 E787.23416 ; perimeter | |
| G1 X-19.820 Y-1.805 E787.29932 ; perimeter | |
| G1 X2.562 Y-1.805 E787.61633 ; perimeter | |
| G1 X3.022 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.662 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E788.29212 F600.000 ; fill | |
| G1 X3.605 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.605 Y-2.963 E788.31219 F600.000 ; fill | |
| G1 X3.801 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.801 Y-11.027 E788.57729 F600.000 ; fill | |
| G1 F2100.000 E783.57729 ; retract | |
| G1 Z7.300 F7800.000 ; lift plate during travel | |
| G1 X11.008 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.100 F7800.000 ; restore layer Z | |
| G1 E788.57729 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E788.73264 F2299.841 ; perimeter | |
| G1 X18.184 Y1.159 E788.76140 ; perimeter | |
| G1 X11.008 Y1.159 E788.91675 ; perimeter | |
| G1 X11.008 Y-0.109 E788.94421 ; perimeter | |
| G1 X10.430 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E789.12461 F2299.841 ; perimeter | |
| G1 X18.763 Y1.738 E789.17842 ; perimeter | |
| G1 X10.430 Y1.738 E789.35881 ; perimeter | |
| G1 X10.430 Y-0.688 E789.41133 ; perimeter | |
| G1 X10.860 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E789.59494 F2299.841 ; perimeter | |
| G1 X19.341 Y2.316 E789.67380 ; perimeter | |
| G1 X9.851 Y2.316 E789.87924 ; perimeter | |
| G1 X9.851 Y-2.674 E789.98726 ; perimeter | |
| G1 X9.459 Y-2.674 E789.99576 ; perimeter | |
| G1 X9.459 Y-11.316 E790.18286 ; perimeter | |
| G1 X10.860 Y-11.316 E790.21319 ; perimeter | |
| G1 X10.860 Y-1.386 E790.42815 ; perimeter | |
| G1 X11.338 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E790.54829 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E790.61344 ; perimeter | |
| G1 X9.373 Y2.795 E790.76142 ; perimeter | |
| G1 X9.373 Y-2.195 E790.83210 ; perimeter | |
| G1 X8.980 Y-2.195 E790.83766 ; perimeter | |
| G1 X8.980 Y-11.795 E790.97363 ; perimeter | |
| G1 X11.338 Y-11.795 E791.00704 ; perimeter | |
| G1 X11.338 Y-1.865 E791.14769 ; perimeter | |
| G1 X11.338 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.159 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.159 Y-11.027 E791.41279 F600.000 ; fill | |
| G1 X10.355 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.355 Y-1.037 E791.43286 F600.000 ; fill | |
| G1 X11.298 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E791.64974 F600.000 ; fill | |
| M73 P37 ; update progress | |
| G1 F2100.000 E786.64974 ; retract | |
| G1 Z7.400 F7800.000 ; move to next layer (69) and lift | |
| G1 X3.052 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.200 F7800.000 ; restore layer Z | |
| G1 E791.64974 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E792.10945 F2304.641 ; perimeter | |
| G1 X-18.184 Y-0.169 E792.13821 ; perimeter | |
| G1 X3.052 Y-0.169 E792.59793 ; perimeter | |
| G1 X3.052 Y1.099 E792.62539 ; perimeter | |
| G1 X3.630 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E793.11015 F2304.641 ; perimeter | |
| G1 X-18.763 Y-0.748 E793.16396 ; perimeter | |
| G1 X3.630 Y-0.748 E793.64872 ; perimeter | |
| G1 X3.630 Y1.678 E793.70124 ; perimeter | |
| G1 X3.158 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.158 Y-11.316 E793.91750 F2304.641 ; perimeter | |
| G1 X4.501 Y-11.316 E793.94658 ; perimeter | |
| G1 X4.501 Y-2.674 E794.13368 ; perimeter | |
| G1 X4.209 Y-2.674 E794.14001 ; perimeter | |
| G1 X4.209 Y2.316 E794.24803 ; perimeter | |
| G1 X-19.341 Y2.316 E794.75784 ; perimeter | |
| G1 X-19.341 Y-1.326 E794.83670 ; perimeter | |
| G1 X3.098 Y-1.326 E795.32246 ; perimeter | |
| G1 X2.679 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.679 Y-11.795 E795.46396 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E795.49655 ; perimeter | |
| G1 X4.980 Y-2.195 E795.63252 ; perimeter | |
| G1 X4.687 Y-2.195 E795.63667 ; perimeter | |
| G1 X4.687 Y2.795 E795.70734 ; perimeter | |
| G1 X-19.820 Y2.795 E796.05447 ; perimeter | |
| G1 X-19.820 Y-1.805 E796.11962 ; perimeter | |
| G1 X2.619 Y-1.805 E796.43746 ; perimeter | |
| G1 X3.079 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.762 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E797.11653 F600.000 ; fill | |
| G1 X3.683 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.683 Y-2.963 E797.13660 F600.000 ; fill | |
| G1 X3.830 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.830 Y-11.027 E797.40170 F600.000 ; fill | |
| G1 F2100.000 E792.40170 ; retract | |
| G1 Z7.400 F7800.000 ; lift plate during travel | |
| G1 X10.908 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.200 F7800.000 ; restore layer Z | |
| G1 E797.40170 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E797.55921 F2304.641 ; perimeter | |
| G1 X18.184 Y1.159 E797.58798 ; perimeter | |
| G1 X10.908 Y1.159 E797.74549 ; perimeter | |
| G1 X10.908 Y-0.109 E797.77295 ; perimeter | |
| G1 X10.330 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E797.95551 F2304.641 ; perimeter | |
| G1 X18.763 Y1.738 E798.00932 ; perimeter | |
| G1 X10.330 Y1.738 E798.19188 ; perimeter | |
| G1 X10.330 Y-0.688 E798.24440 ; perimeter | |
| G1 X10.802 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E798.42926 F2304.641 ; perimeter | |
| G1 X19.341 Y2.316 E798.50812 ; perimeter | |
| G1 X9.751 Y2.316 E798.71572 ; perimeter | |
| G1 X9.751 Y-2.674 E798.82375 ; perimeter | |
| G1 X9.459 Y-2.674 E798.83008 ; perimeter | |
| G1 X9.459 Y-11.316 E799.01718 ; perimeter | |
| G1 X10.802 Y-11.316 E799.04626 ; perimeter | |
| G1 X10.802 Y-1.386 E799.26122 ; perimeter | |
| G1 X11.281 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E799.38218 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E799.44733 ; perimeter | |
| G1 X9.273 Y2.795 E799.59672 ; perimeter | |
| G1 X9.273 Y-2.195 E799.66740 ; perimeter | |
| G1 X8.980 Y-2.195 E799.67155 ; perimeter | |
| G1 X8.980 Y-11.795 E799.80752 ; perimeter | |
| G1 X11.281 Y-11.795 E799.84011 ; perimeter | |
| G1 X11.281 Y-1.865 E799.98076 ; perimeter | |
| G1 X11.281 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.130 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.130 Y-11.027 E800.24586 F600.000 ; fill | |
| G1 X10.277 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.277 Y-1.037 E800.26593 F600.000 ; fill | |
| G1 X11.198 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E800.48610 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P37 ; update progress | |
| G1 F2100.000 E795.48610 ; retract | |
| G1 Z7.500 F7800.000 ; move to next layer (70) and lift | |
| G1 X3.152 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E800.48610 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E800.94797 F4800.000 ; perimeter | |
| G1 X-18.184 Y-0.169 E800.97674 ; perimeter | |
| G1 X3.152 Y-0.169 E801.43861 ; perimeter | |
| G1 X3.152 Y1.099 E801.46608 ; perimeter | |
| G1 X3.730 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E801.95300 F4800.000 ; perimeter | |
| G1 X-18.763 Y-0.748 E802.00681 ; perimeter | |
| G1 X3.730 Y-0.748 E802.49374 ; perimeter | |
| G1 X3.730 Y1.678 E802.54625 ; perimeter | |
| G1 X3.216 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.216 Y-11.316 E802.76251 F4800.000 ; perimeter | |
| G1 X4.501 Y-11.316 E802.79035 ; perimeter | |
| G1 X4.501 Y-2.674 E802.97744 ; perimeter | |
| G1 X4.309 Y-2.674 E802.98161 ; perimeter | |
| G1 X4.309 Y2.316 E803.08964 ; perimeter | |
| G1 X-19.341 Y2.316 E803.60161 ; perimeter | |
| G1 X-19.341 Y-1.326 E803.68047 ; perimeter | |
| G1 X3.156 Y-1.326 E804.16748 ; perimeter | |
| G1 X2.737 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.737 Y-11.795 E804.30898 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E804.34074 ; perimeter | |
| G1 X4.980 Y-2.195 E804.47672 ; perimeter | |
| G1 X4.787 Y-2.195 E804.47945 ; perimeter | |
| G1 X4.787 Y2.795 E804.55013 ; perimeter | |
| G1 X-19.820 Y2.795 E804.89867 ; perimeter | |
| G1 X-19.820 Y-1.805 E804.96382 ; perimeter | |
| G1 X2.677 Y-1.805 E805.28247 ; perimeter | |
| G1 X3.137 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.862 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E805.96484 F600.000 ; fill | |
| G1 X3.762 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.762 Y-2.963 E805.98491 F600.000 ; fill | |
| G1 X3.859 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.859 Y-11.027 E806.25001 F600.000 ; fill | |
| G1 F2100.000 E801.25001 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X10.808 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E806.25001 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E806.40968 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E806.43845 ; perimeter | |
| G1 X10.808 Y1.159 E806.59812 ; perimeter | |
| G1 X10.808 Y-0.109 E806.62559 ; perimeter | |
| G1 X10.230 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E806.81031 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E806.86412 ; perimeter | |
| G1 X10.230 Y1.738 E807.04885 ; perimeter | |
| G1 X10.230 Y-0.688 E807.10136 ; perimeter | |
| G1 X10.744 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E807.28747 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E807.36633 ; perimeter | |
| G1 X9.651 Y2.316 E807.57610 ; perimeter | |
| G1 X9.651 Y-2.674 E807.68412 ; perimeter | |
| G1 X9.459 Y-2.674 E807.68829 ; perimeter | |
| G1 X9.459 Y-11.316 E807.87539 ; perimeter | |
| G1 X10.744 Y-11.316 E807.90322 ; perimeter | |
| G1 X10.744 Y-1.386 E808.11818 ; perimeter | |
| G1 X11.223 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E808.23996 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E808.30511 ; perimeter | |
| G1 X9.173 Y2.795 E808.45592 ; perimeter | |
| G1 X9.173 Y-2.195 E808.52660 ; perimeter | |
| G1 X8.980 Y-2.195 E808.52933 ; perimeter | |
| G1 X8.980 Y-11.795 E808.66530 ; perimeter | |
| G1 X11.223 Y-11.795 E808.69707 ; perimeter | |
| G1 X11.223 Y-1.865 E808.83772 ; perimeter | |
| G1 X11.223 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.101 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.101 Y-11.027 E809.10282 F600.000 ; fill | |
| G1 X10.198 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.198 Y-1.037 E809.12289 F600.000 ; fill | |
| G1 X11.098 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E809.34635 F600.000 ; fill | |
| M73 P38 ; update progress | |
| G1 F2100.000 E804.34635 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E809.34635 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E809.34695 F600.000 ; support material | |
| G1 X18.859 Y3.974 E809.36597 ; support material | |
| G1 X18.859 Y4.016 E809.36658 ; support material | |
| G1 X20.201 Y4.016 E809.38560 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E809.39693 F600.000 ; support material | |
| G1 X18.480 Y3.595 E809.42668 ; support material | |
| G1 X18.480 Y4.395 E809.43801 ; support material | |
| G1 X20.580 Y4.395 E809.46776 ; support material | |
| G1 F2100.000 E804.46776 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E809.46776 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E809.47796 F600.000 ; support material | |
| G1 X20.013 Y10.899 E809.50838 ; support material | |
| G1 X17.705 Y10.831 E809.54109 ; support material | |
| G1 X16.294 Y13.116 E809.57914 ; support material | |
| G1 X21.141 Y13.116 E809.64780 ; support material | |
| G1 X21.141 Y12.595 E809.65520 ; support material | |
| G1 X20.335 Y11.098 E809.67928 ; support material | |
| G1 X21.141 Y9.792 E809.70101 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E809.74592 F600.000 ; support material | |
| G1 X12.099 Y10.855 E809.77807 ; support material | |
| G1 X13.195 Y12.888 E809.81078 ; support material | |
| G1 X13.054 Y13.116 E809.81459 ; support material | |
| G1 X13.498 Y13.116 E809.82089 ; support material | |
| G1 X13.517 Y13.087 E809.82138 ; support material | |
| G1 X14.519 Y13.116 E809.83558 ; support material | |
| G1 X15.849 Y13.116 E809.85442 ; support material | |
| G1 X17.383 Y10.632 E809.89577 ; support material | |
| G1 X16.462 Y8.924 E809.92326 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E809.98685 F600.000 ; support material | |
| G1 X9.147 Y10.389 E810.01043 ; support material | |
| G1 X7.589 Y12.912 E810.05242 ; support material | |
| G1 X5.281 Y12.844 E810.08513 ; support material | |
| G1 X5.112 Y13.116 E810.08967 ; support material | |
| G1 X7.914 Y13.116 E810.12936 ; support material | |
| G1 X9.469 Y10.588 E810.17140 ; support material | |
| G1 X11.777 Y10.656 E810.20411 ; support material | |
| G1 X12.847 Y8.924 E810.23295 ; support material | |
| G1 F2100.000 E805.23295 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E810.23295 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E810.24428 F600.000 ; support material | |
| G1 X9.236 Y3.595 E810.26331 ; support material | |
| G1 X8.851 Y4.395 E810.27589 ; support material | |
| G1 X10.580 Y4.395 E810.30037 ; support material | |
| G1 F2100.000 E805.30037 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E810.30037 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E810.30667 F600.000 ; support material | |
| G1 X3.541 Y10.413 E810.33147 ; support material | |
| G1 X1.233 Y10.345 E810.36418 ; support material | |
| G1 X-0.325 Y12.868 E810.40617 ; support material | |
| G1 X-0.191 Y13.116 E810.41017 ; support material | |
| G1 X4.668 Y13.116 E810.47899 ; support material | |
| G1 X4.959 Y12.645 E810.48684 ; support material | |
| G1 X3.863 Y10.612 E810.51955 ; support material | |
| G1 X4.906 Y8.924 E810.54765 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E810.55949 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E810.67109 ; support material | |
| G1 X-5.270 Y8.545 E810.68177 ; support material | |
| G1 X-21.520 Y8.545 E810.91193 ; support material | |
| G1 X-21.520 Y13.495 E810.98204 ; support material | |
| G1 X21.520 Y13.495 E811.59167 ; support material | |
| G1 X21.520 Y8.545 E811.66178 ; support material | |
| G1 X2.246 Y8.545 E811.93477 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E811.96656 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E812.00709 ; support material | |
| G1 X-4.372 Y10.369 E812.04369 ; support material | |
| G1 X-3.277 Y12.402 E812.07640 ; support material | |
| G1 X-3.718 Y13.116 E812.08830 ; support material | |
| G1 X-3.273 Y13.116 E812.09460 ; support material | |
| G1 X-2.955 Y12.601 E812.10318 ; support material | |
| G1 X-0.647 Y12.669 E812.13589 ; support material | |
| G1 X0.911 Y10.146 E812.17789 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E812.21118 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E812.23145 ; support material | |
| G1 X-4.891 Y8.924 E812.24212 ; support material | |
| G1 X-7.853 Y8.924 E812.28407 ; support material | |
| G1 X-7.325 Y9.903 E812.29983 ; support material | |
| G1 X-8.883 Y12.426 E812.34182 ; support material | |
| G1 X-11.191 Y12.358 E812.37453 ; support material | |
| G1 X-11.659 Y13.116 E812.38716 ; support material | |
| G1 X-8.296 Y13.116 E812.43480 ; support material | |
| G1 X-8.561 Y12.625 E812.44271 ; support material | |
| G1 X-7.003 Y10.102 E812.48471 ; support material | |
| G1 X-4.695 Y10.170 E812.51742 ; support material | |
| G1 F2100.000 E807.51742 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E812.51742 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E812.52875 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E812.55849 ; support material | |
| G1 X-11.520 Y4.395 E812.56983 ; support material | |
| G1 X-9.420 Y4.395 E812.59957 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E812.60018 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E812.61920 ; support material | |
| G1 X-11.141 Y4.016 E812.61981 ; support material | |
| G1 X-9.799 Y4.016 E812.63883 ; support material | |
| G1 F2100.000 E807.63883 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E812.63883 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E812.65884 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E812.66514 ; support material | |
| G1 X-12.930 Y9.927 E812.68185 ; support material | |
| G1 X-15.239 Y9.859 E812.71456 ; support material | |
| G1 X-16.796 Y12.382 E812.75656 ; support material | |
| G1 X-16.401 Y13.116 E812.76837 ; support material | |
| G1 X-12.104 Y13.116 E812.82923 ; support material | |
| G1 X-11.513 Y12.159 E812.84517 ; support material | |
| G1 X-12.608 Y10.126 E812.87788 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E812.88973 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E812.95055 ; support material | |
| G1 X-20.844 Y9.883 E812.96652 ; support material | |
| G1 X-19.749 Y11.916 E812.99923 ; support material | |
| G1 X-20.490 Y13.116 E813.01921 ; support material | |
| G1 X-20.045 Y13.116 E813.02551 ; support material | |
| G1 X-19.427 Y12.115 E813.04219 ; support material | |
| G1 X-17.119 Y12.183 E813.07490 ; support material | |
| G1 X-15.561 Y9.660 E813.11689 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E813.12888 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E813.13518 ; support material | |
| G1 X-21.141 Y9.644 E813.14538 ; support material | |
| G1 F2100.000 E808.14538 ; retract | |
| G1 Z7.500 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z7.300 F7800.000 ; restore layer Z | |
| G1 E813.14538 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E813.15168 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E813.15239 ; support material | |
| G1 X-20.018 Y4.016 E813.15870 ; support material | |
| G1 X-19.991 Y3.974 E813.15941 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E813.17782 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E813.19057 ; support material | |
| G1 X-21.520 Y4.395 E813.22032 ; support material | |
| G1 X-19.420 Y4.395 E813.25006 ; support material | |
| G1 X-19.420 Y3.595 E813.26139 ; support material | |
| G1 X-20.620 Y3.595 E813.27839 ; support material | |
| M126 ; enable fan | |
| M73 P38 ; update progress | |
| G1 F2100.000 E808.27839 ; retract | |
| G1 Z7.600 F7800.000 ; move to next layer (71) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.400 F7800.000 ; restore layer Z | |
| G1 E813.27839 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E813.30715 F2314.241 ; perimeter | |
| G1 X3.252 Y-0.169 E813.77119 ; perimeter | |
| G1 X3.252 Y1.159 E813.79996 ; perimeter | |
| G1 X-18.124 Y1.159 E814.26270 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E814.31651 F2314.241 ; perimeter | |
| G1 X3.830 Y-0.748 E814.80560 ; perimeter | |
| G1 X3.830 Y1.738 E814.85941 ; perimeter | |
| G1 X-18.703 Y1.738 E815.34720 ; perimeter | |
| G1 X3.273 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.273 Y-11.316 E815.56346 F2314.241 ; perimeter | |
| G1 X4.501 Y-11.316 E815.59005 ; perimeter | |
| G1 X4.501 Y-2.674 E815.77715 ; perimeter | |
| G1 X4.409 Y-2.674 E815.77915 ; perimeter | |
| G1 X4.409 Y2.316 E815.88717 ; perimeter | |
| G1 X-19.341 Y2.316 E816.40131 ; perimeter | |
| G1 X-19.341 Y-1.326 E816.48017 ; perimeter | |
| G1 X3.213 Y-1.326 E816.96843 ; perimeter | |
| G1 X2.795 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.795 Y-11.795 E817.10993 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E817.14088 ; perimeter | |
| G1 X4.980 Y-2.195 E817.27685 ; perimeter | |
| G1 X4.887 Y-2.195 E817.27817 ; perimeter | |
| G1 X4.887 Y2.795 E817.34884 ; perimeter | |
| G1 X-19.820 Y2.795 E817.69880 ; perimeter | |
| G1 X-19.820 Y-1.805 E817.76396 ; perimeter | |
| G1 X2.735 Y-1.805 E818.08343 ; perimeter | |
| G1 X3.195 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X2.962 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E818.76907 F600.000 ; fill | |
| G1 X3.841 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.841 Y-2.963 E818.78914 F600.000 ; fill | |
| G1 X3.887 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X3.887 Y-11.027 E819.05424 F600.000 ; fill | |
| G1 F2100.000 E814.05424 ; retract | |
| G1 Z7.600 F7800.000 ; lift plate during travel | |
| G1 X10.708 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.400 F7800.000 ; restore layer Z | |
| G1 E819.05424 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E819.21608 F2314.241 ; perimeter | |
| G1 X18.184 Y1.159 E819.24485 ; perimeter | |
| G1 X10.708 Y1.159 E819.40669 ; perimeter | |
| G1 X10.708 Y-0.109 E819.43415 ; perimeter | |
| G1 X10.130 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E819.62104 F2314.241 ; perimeter | |
| G1 X18.763 Y1.738 E819.67486 ; perimeter | |
| G1 X10.130 Y1.738 E819.86174 ; perimeter | |
| G1 X10.130 Y-0.688 E819.91426 ; perimeter | |
| G1 X10.687 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E820.10162 F2314.241 ; perimeter | |
| G1 X19.341 Y2.316 E820.18048 ; perimeter | |
| G1 X9.551 Y2.316 E820.39241 ; perimeter | |
| G1 X9.551 Y-2.674 E820.50043 ; perimeter | |
| G1 X9.459 Y-2.674 E820.50244 ; perimeter | |
| G1 X9.459 Y-11.316 E820.68954 ; perimeter | |
| G1 X10.687 Y-11.316 E820.71612 ; perimeter | |
| G1 X10.687 Y-1.386 E820.93108 ; perimeter | |
| G1 X11.165 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E821.05367 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E821.11883 ; perimeter | |
| G1 X9.073 Y2.795 E821.27105 ; perimeter | |
| G1 X9.073 Y-2.195 E821.34173 ; perimeter | |
| G1 X8.980 Y-2.195 E821.34304 ; perimeter | |
| G1 X8.980 Y-11.795 E821.47902 ; perimeter | |
| G1 X11.165 Y-11.795 E821.50997 ; perimeter | |
| G1 X11.165 Y-1.865 E821.65062 ; perimeter | |
| G1 X11.165 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.073 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.073 Y-11.027 E821.91572 F600.000 ; fill | |
| G1 X10.119 Y-2.963 F7800.000 ; move to first fill point | |
| G1 X10.119 Y-1.037 E821.93579 F600.000 ; fill | |
| G1 X10.998 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E822.16253 F600.000 ; fill | |
| M73 P39 ; update progress | |
| G1 F2100.000 E817.16253 ; retract | |
| G1 Z7.700 F7800.000 ; move to next layer (72) and lift | |
| G1 X3.352 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.500 F7800.000 ; restore layer Z | |
| G1 E822.16253 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E822.62874 F2319.188 ; perimeter | |
| G1 X-18.184 Y-0.169 E822.65750 ; perimeter | |
| G1 X3.352 Y-0.169 E823.12371 ; perimeter | |
| G1 X3.352 Y1.099 E823.15117 ; perimeter | |
| G1 X3.930 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E823.64242 F2319.188 ; perimeter | |
| G1 X-18.763 Y-0.748 E823.69624 ; perimeter | |
| G1 X3.930 Y-0.748 E824.18749 ; perimeter | |
| G1 X3.930 Y1.678 E824.24000 ; perimeter | |
| G1 X3.331 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.331 Y-11.316 E824.45626 F2319.188 ; perimeter | |
| G1 X4.501 Y-11.316 E824.48160 ; perimeter | |
| G1 X4.509 Y2.316 E824.77672 ; perimeter | |
| G1 X-19.341 Y2.316 E825.29302 ; perimeter | |
| G1 X-19.341 Y-1.326 E825.37188 ; perimeter | |
| G1 X3.271 Y-1.326 E825.86139 ; perimeter | |
| G1 X2.853 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.853 Y-11.795 E826.00289 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E826.03302 ; perimeter | |
| G1 X4.987 Y2.795 E826.23967 ; perimeter | |
| G1 X-19.820 Y2.795 E826.59105 ; perimeter | |
| G1 X-19.820 Y-1.805 E826.65620 ; perimeter | |
| G1 X2.793 Y-1.805 E826.97649 ; perimeter | |
| G1 X3.253 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X3.062 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E827.66543 F600.000 ; fill | |
| G1 X3.916 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.916 Y-11.027 E827.76955 F600.000 ; fill | |
| G1 F2100.000 E822.76955 ; retract | |
| G1 Z7.700 F7800.000 ; lift plate during travel | |
| G1 X10.608 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.500 F7800.000 ; restore layer Z | |
| G1 E827.76955 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E827.93355 F2319.188 ; perimeter | |
| G1 X18.184 Y1.159 E827.96231 ; perimeter | |
| G1 X10.608 Y1.159 E828.12632 ; perimeter | |
| G1 X10.608 Y-0.109 E828.15379 ; perimeter | |
| G1 X10.030 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E828.34284 F2319.188 ; perimeter | |
| G1 X18.763 Y1.738 E828.39665 ; perimeter | |
| G1 X10.030 Y1.738 E828.58570 ; perimeter | |
| G1 X10.030 Y-0.688 E828.63822 ; perimeter | |
| G1 X10.629 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E828.82683 F2319.188 ; perimeter | |
| G1 X19.341 Y2.316 E828.90569 ; perimeter | |
| G1 X9.451 Y2.316 E829.11979 ; perimeter | |
| G1 X9.459 Y-11.316 E829.41491 ; perimeter | |
| G1 X10.629 Y-11.316 E829.44024 ; perimeter | |
| G1 X10.629 Y-1.386 E829.65520 ; perimeter | |
| G1 X11.107 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E829.77861 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E829.84376 ; perimeter | |
| G1 X8.973 Y2.795 E829.99741 ; perimeter | |
| G1 X8.980 Y-11.795 E830.20406 ; perimeter | |
| G1 X11.107 Y-11.795 E830.23419 ; perimeter | |
| G1 X11.107 Y-1.865 E830.37484 ; perimeter | |
| G1 X11.107 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.044 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X10.044 Y-11.027 E830.47896 F600.000 ; fill | |
| G1 X10.898 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E830.70899 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P39 ; update progress | |
| G1 F2100.000 E825.70899 ; retract | |
| G1 Z7.800 F7800.000 ; move to next layer (73) and lift | |
| G1 X3.452 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E830.70899 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E831.17736 F4800.000 ; perimeter | |
| G1 X-18.184 Y-0.169 E831.20613 ; perimeter | |
| G1 X3.452 Y-0.169 E831.67450 ; perimeter | |
| G1 X3.452 Y1.099 E831.70196 ; perimeter | |
| G1 X4.030 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E832.19538 F4800.000 ; perimeter | |
| G1 X-18.763 Y-0.748 E832.24919 ; perimeter | |
| G1 X4.030 Y-0.748 E832.74261 ; perimeter | |
| G1 X4.030 Y1.678 E832.79512 ; perimeter | |
| G1 X3.389 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.389 Y-11.316 E833.01138 F4800.000 ; perimeter | |
| G1 X4.501 Y-11.316 E833.03547 ; perimeter | |
| G1 X4.501 Y-1.326 E833.25173 ; perimeter | |
| G1 X4.609 Y-1.326 E833.25405 ; perimeter | |
| G1 X4.609 Y2.316 E833.33291 ; perimeter | |
| G1 X-19.341 Y2.316 E833.85138 ; perimeter | |
| G1 X-19.341 Y-1.326 E833.93024 ; perimeter | |
| G1 X3.329 Y-1.326 E834.42100 ; perimeter | |
| G1 X2.910 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.910 Y-11.795 E834.56250 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E834.59181 ; perimeter | |
| G1 X4.980 Y-1.805 E834.73331 ; perimeter | |
| G1 X5.087 Y-1.805 E834.73483 ; perimeter | |
| G1 X5.087 Y2.795 E834.79999 ; perimeter | |
| G1 X-19.820 Y2.795 E835.15278 ; perimeter | |
| G1 X-19.820 Y-1.805 E835.21793 ; perimeter | |
| G1 X2.850 Y-1.805 E835.53904 ; perimeter | |
| G1 X3.310 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X3.162 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E836.23126 F600.000 ; fill | |
| G1 X3.945 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.945 Y-11.027 E836.33538 F600.000 ; fill | |
| G1 F2100.000 E831.33538 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X10.508 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E836.33538 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E836.50155 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E836.53031 ; perimeter | |
| G1 X10.508 Y1.159 E836.69648 ; perimeter | |
| G1 X10.508 Y-0.109 E836.72395 ; perimeter | |
| G1 X9.930 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E836.91517 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E836.96898 ; perimeter | |
| G1 X9.930 Y1.738 E837.16020 ; perimeter | |
| G1 X9.930 Y-0.688 E837.21271 ; perimeter | |
| G1 X10.571 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E837.40257 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E837.48143 ; perimeter | |
| G1 X9.351 Y2.316 E837.69769 ; perimeter | |
| G1 X9.351 Y-1.326 E837.77655 ; perimeter | |
| G1 X9.459 Y-1.326 E837.77888 ; perimeter | |
| G1 X9.459 Y-11.316 E837.99514 ; perimeter | |
| G1 X10.571 Y-11.316 E838.01922 ; perimeter | |
| G1 X10.571 Y-1.386 E838.23418 ; perimeter | |
| G1 X11.050 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E838.35841 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E838.42356 ; perimeter | |
| G1 X8.873 Y2.795 E838.57862 ; perimeter | |
| G1 X8.873 Y-1.805 E838.64378 ; perimeter | |
| G1 X8.980 Y-1.805 E838.64530 ; perimeter | |
| G1 X8.980 Y-11.795 E838.78680 ; perimeter | |
| G1 X11.050 Y-11.795 E838.81611 ; perimeter | |
| G1 X11.050 Y-1.865 E838.95676 ; perimeter | |
| G1 X11.050 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X10.015 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X10.015 Y-11.027 E839.06088 F600.000 ; fill | |
| G1 X10.798 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E839.29420 F600.000 ; fill | |
| M73 P39 ; update progress | |
| G1 F2100.000 E834.29420 ; retract | |
| G1 Z7.800 F7800.000 ; move to next layer (25) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E839.29420 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E839.29480 F600.000 ; support material | |
| G1 X18.859 Y3.974 E839.31383 ; support material | |
| G1 X18.859 Y4.016 E839.31443 ; support material | |
| G1 X20.201 Y4.016 E839.33346 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E839.34479 F600.000 ; support material | |
| G1 X18.480 Y3.595 E839.37453 ; support material | |
| G1 X18.480 Y4.395 E839.38586 ; support material | |
| G1 X20.580 Y4.395 E839.41561 ; support material | |
| G1 F2100.000 E834.41561 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E839.41561 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E839.42581 F600.000 ; support material | |
| G1 X20.013 Y10.899 E839.45624 ; support material | |
| G1 X17.705 Y10.831 E839.48895 ; support material | |
| G1 X16.294 Y13.116 E839.52699 ; support material | |
| G1 X21.141 Y13.116 E839.59566 ; support material | |
| G1 X21.141 Y12.595 E839.60305 ; support material | |
| G1 X20.335 Y11.098 E839.62713 ; support material | |
| G1 X21.141 Y9.792 E839.64887 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E839.69378 F600.000 ; support material | |
| G1 X12.099 Y10.855 E839.72592 ; support material | |
| G1 X13.195 Y12.888 E839.75863 ; support material | |
| G1 X13.054 Y13.116 E839.76244 ; support material | |
| G1 X13.498 Y13.116 E839.76874 ; support material | |
| G1 X13.517 Y13.087 E839.76923 ; support material | |
| G1 X14.519 Y13.116 E839.78344 ; support material | |
| G1 X15.849 Y13.116 E839.80227 ; support material | |
| G1 X17.383 Y10.632 E839.84363 ; support material | |
| G1 X16.462 Y8.924 E839.87111 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E839.93470 F600.000 ; support material | |
| G1 X9.147 Y10.389 E839.95828 ; support material | |
| G1 X7.589 Y12.912 E840.00028 ; support material | |
| G1 X5.281 Y12.844 E840.03299 ; support material | |
| G1 X5.112 Y13.116 E840.03752 ; support material | |
| G1 X7.914 Y13.116 E840.07721 ; support material | |
| G1 X9.469 Y10.588 E840.11925 ; support material | |
| G1 X11.777 Y10.656 E840.15196 ; support material | |
| G1 X12.847 Y8.924 E840.18080 ; support material | |
| G1 F2100.000 E835.18080 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E840.18080 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E840.19213 F600.000 ; support material | |
| G1 X9.236 Y3.595 E840.21116 ; support material | |
| G1 X8.851 Y4.395 E840.22374 ; support material | |
| G1 X10.580 Y4.395 E840.24822 ; support material | |
| G1 F2100.000 E835.24822 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E840.24822 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E840.25453 F600.000 ; support material | |
| G1 X3.541 Y10.413 E840.27932 ; support material | |
| G1 X1.233 Y10.345 E840.31203 ; support material | |
| G1 X-0.325 Y12.868 E840.35403 ; support material | |
| G1 X-0.191 Y13.116 E840.35803 ; support material | |
| G1 X4.668 Y13.116 E840.42684 ; support material | |
| G1 X4.959 Y12.645 E840.43469 ; support material | |
| G1 X3.863 Y10.612 E840.46740 ; support material | |
| G1 X4.906 Y8.924 E840.49550 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E840.50735 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E840.61895 ; support material | |
| G1 X-5.270 Y8.545 E840.62962 ; support material | |
| G1 X-21.520 Y8.545 E840.85978 ; support material | |
| G1 X-21.520 Y13.495 E840.92990 ; support material | |
| G1 X21.520 Y13.495 E841.53952 ; support material | |
| G1 X21.520 Y8.545 E841.60963 ; support material | |
| G1 X2.246 Y8.545 E841.88262 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E841.91441 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E841.95494 ; support material | |
| G1 X-4.372 Y10.369 E841.99154 ; support material | |
| G1 X-3.277 Y12.402 E842.02426 ; support material | |
| G1 X-3.718 Y13.116 E842.03615 ; support material | |
| G1 X-3.273 Y13.116 E842.04245 ; support material | |
| G1 X-2.955 Y12.601 E842.05103 ; support material | |
| G1 X-0.647 Y12.669 E842.08374 ; support material | |
| G1 X0.911 Y10.146 E842.12574 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E842.15903 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E842.17930 ; support material | |
| G1 X-4.891 Y8.924 E842.18998 ; support material | |
| G1 X-7.853 Y8.924 E842.23192 ; support material | |
| G1 X-7.325 Y9.903 E842.24768 ; support material | |
| G1 X-8.883 Y12.426 E842.28968 ; support material | |
| G1 X-11.191 Y12.358 E842.32239 ; support material | |
| G1 X-11.659 Y13.116 E842.33501 ; support material | |
| G1 X-8.296 Y13.116 E842.38265 ; support material | |
| G1 X-8.561 Y12.625 E842.39056 ; support material | |
| G1 X-7.003 Y10.102 E842.43256 ; support material | |
| G1 X-4.695 Y10.170 E842.46527 ; support material | |
| G1 F2100.000 E837.46527 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E842.46527 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E842.47660 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E842.50635 ; support material | |
| G1 X-11.520 Y4.395 E842.51768 ; support material | |
| G1 X-9.420 Y4.395 E842.54742 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E842.54803 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E842.56705 ; support material | |
| G1 X-11.141 Y4.016 E842.56766 ; support material | |
| G1 X-9.799 Y4.016 E842.58668 ; support material | |
| G1 F2100.000 E837.58668 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E842.58668 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E842.60669 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E842.61300 ; support material | |
| G1 X-12.930 Y9.927 E842.62970 ; support material | |
| G1 X-15.239 Y9.859 E842.66241 ; support material | |
| G1 X-16.796 Y12.382 E842.70441 ; support material | |
| G1 X-16.401 Y13.116 E842.71623 ; support material | |
| G1 X-12.104 Y13.116 E842.77708 ; support material | |
| G1 X-11.513 Y12.159 E842.79302 ; support material | |
| G1 X-12.608 Y10.126 E842.82573 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E842.83758 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E842.89840 ; support material | |
| G1 X-20.844 Y9.883 E842.91437 ; support material | |
| G1 X-19.749 Y11.916 E842.94708 ; support material | |
| G1 X-20.490 Y13.116 E842.96706 ; support material | |
| G1 X-20.045 Y13.116 E842.97337 ; support material | |
| G1 X-19.427 Y12.115 E842.99004 ; support material | |
| G1 X-17.119 Y12.183 E843.02275 ; support material | |
| G1 X-15.561 Y9.660 E843.06474 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E843.07673 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E843.08303 ; support material | |
| G1 X-21.141 Y9.644 E843.09323 ; support material | |
| G1 F2100.000 E838.09323 ; retract | |
| G1 Z7.800 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z7.600 F7800.000 ; restore layer Z | |
| G1 E843.09323 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E843.09953 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E843.10025 ; support material | |
| G1 X-20.018 Y4.016 E843.10655 ; support material | |
| G1 X-19.991 Y3.974 E843.10726 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E843.12567 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E843.13842 ; support material | |
| G1 X-21.520 Y4.395 E843.16817 ; support material | |
| G1 X-19.420 Y4.395 E843.19791 ; support material | |
| G1 X-19.420 Y3.595 E843.20924 ; support material | |
| G1 X-20.620 Y3.595 E843.22624 ; support material | |
| M126 ; enable fan | |
| M73 P40 ; update progress | |
| G1 F2100.000 E838.22624 ; retract | |
| G1 Z7.900 F7800.000 ; move to next layer (74) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z7.700 F7800.000 ; restore layer Z | |
| G1 E843.22624 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E843.25500 F2336.936 ; perimeter | |
| G1 X3.552 Y-0.169 E843.72554 ; perimeter | |
| G1 X3.552 Y1.159 E843.75430 ; perimeter | |
| G1 X-18.124 Y1.159 E844.22354 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E844.27735 F2336.936 ; perimeter | |
| G1 X4.130 Y-0.748 E844.77294 ; perimeter | |
| G1 X4.130 Y1.738 E844.82675 ; perimeter | |
| G1 X-18.703 Y1.738 E845.32103 ; perimeter | |
| G1 X3.447 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.447 Y-11.316 E845.53729 F2336.936 ; perimeter | |
| G1 X4.501 Y-11.316 E845.56013 ; perimeter | |
| G1 X4.501 Y-1.326 E845.77639 ; perimeter | |
| G1 X4.709 Y-1.326 E845.78087 ; perimeter | |
| G1 X4.709 Y2.316 E845.85974 ; perimeter | |
| G1 X-19.341 Y2.316 E846.38037 ; perimeter | |
| G1 X-19.341 Y-1.326 E846.45923 ; perimeter | |
| G1 X3.387 Y-1.326 E846.95124 ; perimeter | |
| G1 X2.968 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X2.968 Y-11.795 E847.09273 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E847.12123 ; perimeter | |
| G1 X4.980 Y-1.805 E847.26273 ; perimeter | |
| G1 X5.187 Y-1.805 E847.26567 ; perimeter | |
| G1 X5.187 Y2.795 E847.33082 ; perimeter | |
| G1 X-19.820 Y2.795 E847.68503 ; perimeter | |
| G1 X-19.820 Y-1.805 E847.75018 ; perimeter | |
| G1 X2.908 Y-1.805 E848.07211 ; perimeter | |
| G1 X3.368 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X3.262 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E848.76762 F600.000 ; fill | |
| G1 X3.974 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X3.974 Y-11.027 E848.87174 F600.000 ; fill | |
| G1 F2100.000 E843.87174 ; retract | |
| G1 Z7.900 F7800.000 ; lift plate during travel | |
| G1 X10.408 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.700 F7800.000 ; restore layer Z | |
| G1 E848.87174 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E849.04007 F2336.936 ; perimeter | |
| G1 X18.184 Y1.159 E849.06884 ; perimeter | |
| G1 X10.408 Y1.159 E849.23717 ; perimeter | |
| G1 X10.408 Y-0.109 E849.26464 ; perimeter | |
| G1 X9.830 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E849.45802 F2336.936 ; perimeter | |
| G1 X18.763 Y1.738 E849.51183 ; perimeter | |
| G1 X9.830 Y1.738 E849.70521 ; perimeter | |
| G1 X9.830 Y-0.688 E849.75773 ; perimeter | |
| G1 X9.459 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-11.316 E849.97399 F2336.936 ; perimeter | |
| G1 X10.513 Y-11.316 E849.99682 ; perimeter | |
| G1 X10.513 Y-1.326 E850.21308 ; perimeter | |
| G1 X19.341 Y-1.326 E850.40419 ; perimeter | |
| G1 X19.341 Y2.316 E850.48305 ; perimeter | |
| G1 X9.251 Y2.316 E850.70148 ; perimeter | |
| G1 X9.251 Y-1.326 E850.78034 ; perimeter | |
| G1 X9.399 Y-1.326 E850.78353 ; perimeter | |
| G1 X10.992 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E850.90857 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E850.97373 ; perimeter | |
| G1 X8.773 Y2.795 E851.13020 ; perimeter | |
| G1 X8.773 Y-1.805 E851.19536 ; perimeter | |
| G1 X8.980 Y-1.805 E851.19829 ; perimeter | |
| G1 X8.980 Y-11.795 E851.33979 ; perimeter | |
| G1 X10.992 Y-11.795 E851.36829 ; perimeter | |
| G1 X10.992 Y-1.865 E851.50894 ; perimeter | |
| G1 X10.992 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X9.986 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X9.986 Y-11.027 E851.61306 F600.000 ; fill | |
| G1 X10.698 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E851.84966 F600.000 ; fill | |
| M73 P40 ; update progress | |
| G1 F2100.000 E846.84966 ; retract | |
| G1 Z8.000 F7800.000 ; move to next layer (75) and lift | |
| G1 X3.816 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.800 F7800.000 ; restore layer Z | |
| G1 E851.84966 F2100.000 ; compensate retraction | |
| G1 X3.816 Y1.159 E851.87843 F2360.226 ; perimeter | |
| G1 X-18.184 Y1.159 E852.35469 ; perimeter | |
| G1 X-18.184 Y-0.169 E852.38346 ; perimeter | |
| G1 X3.756 Y-0.169 E852.85842 ; perimeter | |
| G1 X4.395 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.395 Y1.738 E852.91223 F2360.226 ; perimeter | |
| G1 X-18.763 Y1.738 E853.41355 ; perimeter | |
| G1 X-18.763 Y-0.748 E853.46736 ; perimeter | |
| G1 X4.335 Y-0.748 E853.96737 ; perimeter | |
| G1 X4.501 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X4.973 Y-1.326 E853.97759 F2360.226 ; perimeter | |
| G1 X4.973 Y2.316 E854.05645 ; perimeter | |
| G1 X-19.341 Y2.316 E854.58281 ; perimeter | |
| G1 X-19.341 Y-1.326 E854.66167 ; perimeter | |
| G1 X3.504 Y-1.326 E855.15623 ; perimeter | |
| G1 X3.504 Y-11.316 E855.37249 ; perimeter | |
| G1 X4.501 Y-11.316 E855.39407 ; perimeter | |
| G1 X4.501 Y-1.386 E855.60904 ; perimeter | |
| G1 X4.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X5.452 Y-1.805 E855.61572 F600.000 ; perimeter | |
| G1 X5.452 Y2.795 E855.68088 ; perimeter | |
| G1 X-19.820 Y2.795 E856.03883 ; perimeter | |
| G1 X-19.820 Y-1.805 E856.10399 ; perimeter | |
| G1 X3.026 Y-1.805 E856.42758 ; perimeter | |
| G1 X3.026 Y-11.795 E856.56907 ; perimeter | |
| G1 X4.980 Y-11.795 E856.59675 ; perimeter | |
| G1 X4.980 Y-1.865 E856.73740 ; perimeter | |
| G1 X4.980 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X3.527 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E857.44161 F600.000 ; fill | |
| G1 X4.003 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X4.003 Y-11.027 E857.54573 F600.000 ; fill | |
| G1 F2100.000 E852.54573 ; retract | |
| G1 Z8.000 F7800.000 ; lift plate during travel | |
| G1 X10.144 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.800 F7800.000 ; restore layer Z | |
| G1 E857.54573 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E857.71980 F2360.226 ; perimeter | |
| G1 X18.184 Y1.159 E857.74856 ; perimeter | |
| G1 X10.144 Y1.159 E857.92263 ; perimeter | |
| G1 X10.144 Y-0.109 E857.95009 ; perimeter | |
| G1 X9.565 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E858.14920 F2360.226 ; perimeter | |
| G1 X18.763 Y1.738 E858.20302 ; perimeter | |
| G1 X9.565 Y1.738 E858.40213 ; perimeter | |
| G1 X9.565 Y-0.688 E858.45464 ; perimeter | |
| G1 X9.459 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-11.316 E858.67090 F2360.226 ; perimeter | |
| G1 X10.456 Y-11.316 E858.69249 ; perimeter | |
| G1 X10.456 Y-1.326 E858.90874 ; perimeter | |
| G1 X19.341 Y-1.326 E859.10110 ; perimeter | |
| G1 X19.341 Y2.316 E859.17996 ; perimeter | |
| G1 X8.987 Y2.316 E859.40412 ; perimeter | |
| G1 X8.987 Y-1.326 E859.48298 ; perimeter | |
| G1 X9.399 Y-1.326 E859.49190 ; perimeter | |
| G1 X8.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-11.795 E859.63340 F600.000 ; perimeter | |
| G1 X10.934 Y-11.795 E859.66108 ; perimeter | |
| G1 X10.934 Y-1.805 E859.80258 ; perimeter | |
| G1 X19.820 Y-1.805 E859.92844 ; perimeter | |
| G1 X19.820 Y2.795 E859.99359 ; perimeter | |
| G1 X8.508 Y2.795 E860.15382 ; perimeter | |
| G1 X8.508 Y-1.805 E860.21897 ; perimeter | |
| G1 X8.920 Y-1.805 E860.22481 ; perimeter | |
| G1 X9.380 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X9.957 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X9.957 Y-11.027 E860.32893 F600.000 ; fill | |
| G1 X10.433 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E860.57423 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P41 ; update progress | |
| G1 F2100.000 E855.57423 ; retract | |
| G1 Z8.100 F7800.000 ; move to next layer (76) and lift | |
| G1 X4.190 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E860.57423 F2100.000 ; compensate retraction | |
| G1 X4.190 Y1.159 E860.60300 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E861.08734 ; perimeter | |
| G1 X-18.184 Y-0.169 E861.11611 ; perimeter | |
| G1 X4.130 Y-0.169 E861.59915 ; perimeter | |
| G1 X4.768 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X4.768 Y1.738 E861.65296 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E862.16235 ; perimeter | |
| G1 X-18.763 Y-0.748 E862.21617 ; perimeter | |
| G1 X4.708 Y-0.748 E862.72426 ; perimeter | |
| G1 X4.501 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X5.347 Y-1.326 E862.74256 F4800.000 ; perimeter | |
| G1 X5.347 Y2.316 E862.82142 ; perimeter | |
| G1 X-19.341 Y2.316 E863.35586 ; perimeter | |
| G1 X-19.341 Y-1.326 E863.43472 ; perimeter | |
| G1 X3.562 Y-1.326 E863.93052 ; perimeter | |
| G1 X3.562 Y-11.316 E864.14678 ; perimeter | |
| G1 X4.501 Y-11.316 E864.16712 ; perimeter | |
| G1 X4.501 Y-1.386 E864.38208 ; perimeter | |
| G1 X4.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X5.825 Y-1.805 E864.39405 F1200.000 ; perimeter | |
| G1 X5.825 Y2.795 E864.45921 ; perimeter | |
| G1 X-19.820 Y2.795 E864.82245 ; perimeter | |
| G1 X-19.820 Y-1.805 E864.88760 ; perimeter | |
| G1 X3.084 Y-1.805 E865.21201 ; perimeter | |
| G1 X3.084 Y-11.795 E865.35351 ; perimeter | |
| G1 X4.980 Y-11.795 E865.38037 ; perimeter | |
| G1 X4.980 Y-1.865 E865.52102 ; perimeter | |
| G1 X4.980 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X3.900 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E866.23750 F600.000 ; fill | |
| G1 X4.032 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X4.032 Y-11.027 E866.34162 F600.000 ; fill | |
| G1 F2100.000 E861.34162 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X9.770 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E866.34162 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E866.52376 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E866.55252 ; perimeter | |
| G1 X9.770 Y1.159 E866.73467 ; perimeter | |
| G1 X9.770 Y-0.109 E866.76213 ; perimeter | |
| G1 X9.192 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E866.96932 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E867.02314 ; perimeter | |
| G1 X9.192 Y1.738 E867.23033 ; perimeter | |
| G1 X9.192 Y-0.688 E867.28284 ; perimeter | |
| G1 X9.459 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-11.316 E867.49910 F4800.000 ; perimeter | |
| G1 X10.398 Y-11.316 E867.51944 ; perimeter | |
| G1 X10.398 Y-1.326 E867.73570 ; perimeter | |
| G1 X19.341 Y-1.326 E867.92930 ; perimeter | |
| G1 X19.341 Y2.316 E868.00816 ; perimeter | |
| G1 X8.613 Y2.316 E868.24040 ; perimeter | |
| G1 X8.613 Y-1.326 E868.31926 ; perimeter | |
| G1 X9.399 Y-1.326 E868.33626 ; perimeter | |
| G1 X8.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-11.795 E868.47776 F1200.000 ; perimeter | |
| G1 X10.876 Y-11.795 E868.50462 ; perimeter | |
| G1 X10.876 Y-1.805 E868.64612 ; perimeter | |
| G1 X19.820 Y-1.805 E868.77280 ; perimeter | |
| G1 X19.820 Y2.795 E868.83795 ; perimeter | |
| G1 X8.135 Y2.795 E869.00346 ; perimeter | |
| G1 X8.135 Y-1.805 E869.06862 ; perimeter | |
| G1 X8.920 Y-1.805 E869.07974 ; perimeter | |
| G1 X9.380 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X9.928 Y-1.037 F7800.000 ; move to first fill point | |
| G1 X9.928 Y-11.027 E869.18386 F600.000 ; fill | |
| G1 X10.060 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E869.44143 F600.000 ; fill | |
| M73 P41 ; update progress | |
| G1 F2100.000 E864.44143 ; retract | |
| G1 Z8.100 F7800.000 ; move to next layer (26) and lift | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E869.44143 F2100.000 ; compensate retraction | |
| G1 X20.201 Y3.974 E869.44204 F600.000 ; support material | |
| G1 X18.859 Y3.974 E869.46106 ; support material | |
| G1 X18.859 Y4.016 E869.46167 ; support material | |
| G1 X20.201 Y4.016 E869.48069 ; support material | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 X20.580 Y3.595 E869.49202 F600.000 ; support material | |
| G1 X18.480 Y3.595 E869.52177 ; support material | |
| G1 X18.480 Y4.395 E869.53310 ; support material | |
| G1 X20.580 Y4.395 E869.56284 ; support material | |
| G1 F2100.000 E864.56284 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E869.56284 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E869.57305 F600.000 ; support material | |
| G1 X20.013 Y10.899 E869.60347 ; support material | |
| G1 X17.705 Y10.831 E869.63618 ; support material | |
| G1 X16.294 Y13.116 E869.67423 ; support material | |
| G1 X21.141 Y13.116 E869.74289 ; support material | |
| G1 X21.141 Y12.595 E869.75028 ; support material | |
| G1 X20.335 Y11.098 E869.77436 ; support material | |
| G1 X21.141 Y9.792 E869.79610 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E869.84101 F600.000 ; support material | |
| G1 X12.099 Y10.855 E869.87316 ; support material | |
| G1 X13.195 Y12.888 E869.90587 ; support material | |
| G1 X13.054 Y13.116 E869.90967 ; support material | |
| G1 X13.498 Y13.116 E869.91597 ; support material | |
| G1 X13.517 Y13.087 E869.91647 ; support material | |
| G1 X14.519 Y13.116 E869.93067 ; support material | |
| G1 X15.849 Y13.116 E869.94950 ; support material | |
| G1 X17.383 Y10.632 E869.99086 ; support material | |
| G1 X16.462 Y8.924 E870.01835 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E870.08194 F600.000 ; support material | |
| G1 X9.147 Y10.389 E870.10551 ; support material | |
| G1 X7.589 Y12.912 E870.14751 ; support material | |
| G1 X5.281 Y12.844 E870.18022 ; support material | |
| G1 X5.112 Y13.116 E870.18476 ; support material | |
| G1 X7.914 Y13.116 E870.22444 ; support material | |
| G1 X9.469 Y10.588 E870.26649 ; support material | |
| G1 X11.777 Y10.656 E870.29920 ; support material | |
| G1 X12.847 Y8.924 E870.32803 ; support material | |
| G1 F2100.000 E865.32803 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E870.32803 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E870.33937 F600.000 ; support material | |
| G1 X9.236 Y3.595 E870.35839 ; support material | |
| G1 X8.851 Y4.395 E870.37097 ; support material | |
| G1 X10.580 Y4.395 E870.39546 ; support material | |
| G1 F2100.000 E865.39546 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E870.39546 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E870.40176 F600.000 ; support material | |
| G1 X3.541 Y10.413 E870.42655 ; support material | |
| G1 X1.233 Y10.345 E870.45926 ; support material | |
| G1 X-0.325 Y12.868 E870.50126 ; support material | |
| G1 X-0.191 Y13.116 E870.50526 ; support material | |
| G1 X4.668 Y13.116 E870.57407 ; support material | |
| G1 X4.959 Y12.645 E870.58192 ; support material | |
| G1 X3.863 Y10.612 E870.61463 ; support material | |
| G1 X4.906 Y8.924 E870.64274 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E870.65458 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E870.76618 ; support material | |
| G1 X-5.270 Y8.545 E870.77685 ; support material | |
| G1 X-21.520 Y8.545 E871.00702 ; support material | |
| G1 X-21.520 Y13.495 E871.07713 ; support material | |
| G1 X21.520 Y13.495 E871.68675 ; support material | |
| G1 X21.520 Y8.545 E871.75686 ; support material | |
| G1 X2.246 Y8.545 E872.02986 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E872.06165 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E872.10218 ; support material | |
| G1 X-4.372 Y10.369 E872.13878 ; support material | |
| G1 X-3.277 Y12.402 E872.17149 ; support material | |
| G1 X-3.718 Y13.116 E872.18338 ; support material | |
| G1 X-3.273 Y13.116 E872.18968 ; support material | |
| G1 X-2.955 Y12.601 E872.19826 ; support material | |
| G1 X-0.647 Y12.669 E872.23098 ; support material | |
| G1 X0.911 Y10.146 E872.27297 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E872.30626 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E872.32654 ; support material | |
| G1 X-4.891 Y8.924 E872.33721 ; support material | |
| G1 X-7.853 Y8.924 E872.37915 ; support material | |
| G1 X-7.325 Y9.903 E872.39491 ; support material | |
| G1 X-8.883 Y12.426 E872.43691 ; support material | |
| G1 X-11.191 Y12.358 E872.46962 ; support material | |
| G1 X-11.659 Y13.116 E872.48225 ; support material | |
| G1 X-8.296 Y13.116 E872.52989 ; support material | |
| G1 X-8.561 Y12.625 E872.53780 ; support material | |
| G1 X-7.003 Y10.102 E872.57979 ; support material | |
| G1 X-4.695 Y10.170 E872.61251 ; support material | |
| G1 F2100.000 E867.61251 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E872.61251 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E872.62384 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E872.65358 ; support material | |
| G1 X-11.520 Y4.395 E872.66491 ; support material | |
| G1 X-9.420 Y4.395 E872.69466 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E872.69526 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E872.71429 ; support material | |
| G1 X-11.141 Y4.016 E872.71489 ; support material | |
| G1 X-9.799 Y4.016 E872.73392 ; support material | |
| G1 F2100.000 E867.73392 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E872.73392 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E872.75393 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E872.76023 ; support material | |
| G1 X-12.930 Y9.927 E872.77693 ; support material | |
| G1 X-15.239 Y9.859 E872.80965 ; support material | |
| G1 X-16.796 Y12.382 E872.85164 ; support material | |
| G1 X-16.401 Y13.116 E872.86346 ; support material | |
| G1 X-12.104 Y13.116 E872.92432 ; support material | |
| G1 X-11.513 Y12.159 E872.94025 ; support material | |
| G1 X-12.608 Y10.126 E872.97296 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E872.98481 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E873.04564 ; support material | |
| G1 X-20.844 Y9.883 E873.06161 ; support material | |
| G1 X-19.749 Y11.916 E873.09432 ; support material | |
| G1 X-20.490 Y13.116 E873.11430 ; support material | |
| G1 X-20.045 Y13.116 E873.12060 ; support material | |
| G1 X-19.427 Y12.115 E873.13727 ; support material | |
| G1 X-17.119 Y12.183 E873.16998 ; support material | |
| G1 X-15.561 Y9.660 E873.21198 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E873.22397 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E873.23026 ; support material | |
| G1 X-21.141 Y9.644 E873.24046 ; support material | |
| G1 F2100.000 E868.24046 ; retract | |
| G1 Z8.100 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z7.900 F7800.000 ; restore layer Z | |
| G1 E873.24046 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E873.24677 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E873.24748 ; support material | |
| G1 X-20.018 Y4.016 E873.25378 ; support material | |
| G1 X-19.991 Y3.974 E873.25450 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E873.27291 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E873.28566 ; support material | |
| G1 X-21.520 Y4.395 E873.31540 ; support material | |
| G1 X-19.420 Y4.395 E873.34515 ; support material | |
| G1 X-19.420 Y3.595 E873.35648 ; support material | |
| G1 X-20.620 Y3.595 E873.37347 ; support material | |
| M126 ; enable fan | |
| M73 P41 ; update progress | |
| G1 F2100.000 E868.37347 ; retract | |
| G1 Z8.200 F7800.000 ; move to next layer (77) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z8.000 F7800.000 ; restore layer Z | |
| G1 E873.37347 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E873.40224 F2106.230 ; perimeter | |
| G1 X4.563 Y-0.169 E873.89466 ; perimeter | |
| G1 X4.563 Y1.159 E873.92343 ; perimeter | |
| G1 X-18.124 Y1.159 E874.41455 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E874.46836 F2106.230 ; perimeter | |
| G1 X5.141 Y-0.748 E874.98583 ; perimeter | |
| G1 X5.141 Y1.738 E875.03964 ; perimeter | |
| G1 X-18.703 Y1.738 E875.55582 ; perimeter | |
| G1 X3.623 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.623 Y-11.316 E875.77208 F2106.230 ; perimeter | |
| G1 X4.501 Y-11.316 E875.79108 ; perimeter | |
| G1 X4.501 Y-1.326 E876.00734 ; perimeter | |
| G1 X5.720 Y-1.326 E876.03372 ; perimeter | |
| G1 X5.720 Y2.316 E876.11258 ; perimeter | |
| G1 X-19.341 Y2.316 E876.65510 ; perimeter | |
| G1 X-19.341 Y-1.326 E876.73396 ; perimeter | |
| G1 X3.563 Y-1.326 E877.22979 ; perimeter | |
| G1 X3.145 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.145 Y-11.795 E877.37129 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E877.39729 ; perimeter | |
| G1 X4.980 Y-1.805 E877.53878 ; perimeter | |
| G1 X6.198 Y-1.805 E877.55604 ; perimeter | |
| G1 X6.198 Y2.795 E877.62120 ; perimeter | |
| G1 X-19.820 Y2.795 E877.98972 ; perimeter | |
| G1 X-19.820 Y-1.805 E878.05488 ; perimeter | |
| G1 X3.085 Y-1.805 E878.37931 ; perimeter | |
| G1 X3.545 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X4.274 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E879.10805 F600.000 ; fill | |
| G1 F2100.000 E874.10805 ; retract | |
| G1 Z8.200 F7800.000 ; lift plate during travel | |
| G1 X9.397 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.000 F7800.000 ; restore layer Z | |
| G1 E879.10805 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E879.29828 F2106.230 ; perimeter | |
| G1 X18.184 Y1.159 E879.32704 ; perimeter | |
| G1 X9.397 Y1.159 E879.51726 ; perimeter | |
| G1 X9.397 Y-0.109 E879.54473 ; perimeter | |
| G1 X8.819 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E879.76000 F2106.230 ; perimeter | |
| G1 X18.763 Y1.738 E879.81381 ; perimeter | |
| G1 X8.819 Y1.738 E880.02908 ; perimeter | |
| G1 X8.819 Y-0.688 E880.08159 ; perimeter | |
| G1 X9.459 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-11.316 E880.29785 F2106.230 ; perimeter | |
| G1 X10.337 Y-11.316 E880.31686 ; perimeter | |
| G1 X10.337 Y-1.326 E880.53312 ; perimeter | |
| G1 X19.341 Y-1.326 E880.72805 ; perimeter | |
| G1 X19.341 Y2.316 E880.80691 ; perimeter | |
| G1 X8.240 Y2.316 E881.04723 ; perimeter | |
| G1 X8.240 Y-1.326 E881.12609 ; perimeter | |
| G1 X9.399 Y-1.326 E881.15117 ; perimeter | |
| G1 X8.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-11.795 E881.29267 F600.000 ; perimeter | |
| G1 X10.815 Y-11.795 E881.31866 ; perimeter | |
| G1 X10.815 Y-1.805 E881.46016 ; perimeter | |
| G1 X19.820 Y-1.805 E881.58771 ; perimeter | |
| G1 X19.820 Y2.795 E881.65286 ; perimeter | |
| G1 X7.762 Y2.795 E881.82366 ; perimeter | |
| G1 X7.762 Y-1.805 E881.88881 ; perimeter | |
| G1 X8.920 Y-1.805 E881.90522 ; perimeter | |
| G1 X9.380 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X9.686 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E882.17506 F600.000 ; fill | |
| M73 P42 ; update progress | |
| G1 F2100.000 E877.17506 ; retract | |
| G1 Z8.300 F7800.000 ; move to next layer (78) and lift | |
| G1 X4.936 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.100 F7800.000 ; restore layer Z | |
| G1 E882.17506 F2100.000 ; compensate retraction | |
| G1 X4.936 Y1.159 E882.20383 F2139.072 ; perimeter | |
| G1 X-18.184 Y1.159 E882.70433 ; perimeter | |
| G1 X-18.184 Y-0.169 E882.73309 ; perimeter | |
| G1 X4.876 Y-0.169 E883.23230 ; perimeter | |
| G1 X5.515 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X5.515 Y1.738 E883.28611 F2139.072 ; perimeter | |
| G1 X-18.763 Y1.738 E883.81166 ; perimeter | |
| G1 X-18.763 Y-0.748 E883.86547 ; perimeter | |
| G1 X5.455 Y-0.748 E884.38972 ; perimeter | |
| G1 X4.501 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X6.093 Y-1.326 E884.42418 F2139.072 ; perimeter | |
| G1 X6.093 Y2.316 E884.50304 ; perimeter | |
| G1 X-19.341 Y2.316 E885.05363 ; perimeter | |
| G1 X-19.341 Y-1.326 E885.13249 ; perimeter | |
| G1 X3.713 Y-1.326 E885.63158 ; perimeter | |
| G1 X3.713 Y-11.316 E885.84784 ; perimeter | |
| G1 X4.501 Y-11.316 E885.86490 ; perimeter | |
| G1 X4.501 Y-1.386 E886.07986 ; perimeter | |
| G1 X4.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X6.572 Y-1.805 E886.10240 F600.000 ; perimeter | |
| G1 X6.572 Y2.795 E886.16756 ; perimeter | |
| G1 X-19.820 Y2.795 E886.54137 ; perimeter | |
| G1 X-19.820 Y-1.805 E886.60652 ; perimeter | |
| G1 X3.235 Y-1.805 E886.93307 ; perimeter | |
| G1 X3.235 Y-11.795 E887.07457 ; perimeter | |
| G1 X4.980 Y-11.795 E887.09929 ; perimeter | |
| G1 X4.980 Y-1.865 E887.23994 ; perimeter | |
| G1 X4.980 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X4.647 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E887.98096 F600.000 ; fill | |
| G1 F2100.000 E882.98096 ; retract | |
| G1 Z8.300 F7800.000 ; lift plate during travel | |
| G1 X9.024 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.100 F7800.000 ; restore layer Z | |
| G1 E887.98096 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E888.17926 F2139.072 ; perimeter | |
| G1 X18.184 Y1.159 E888.20802 ; perimeter | |
| G1 X9.024 Y1.159 E888.40632 ; perimeter | |
| G1 X9.024 Y-0.109 E888.43379 ; perimeter | |
| G1 X8.445 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E888.65714 F2139.072 ; perimeter | |
| G1 X18.763 Y1.738 E888.71095 ; perimeter | |
| G1 X8.445 Y1.738 E888.93430 ; perimeter | |
| G1 X8.445 Y-0.688 E888.98681 ; perimeter | |
| G1 X9.459 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-11.316 E889.20307 F2139.072 ; perimeter | |
| G1 X10.247 Y-11.316 E889.22013 ; perimeter | |
| G1 X10.247 Y-1.326 E889.43639 ; perimeter | |
| G1 X19.341 Y-1.326 E889.63327 ; perimeter | |
| G1 X19.341 Y2.316 E889.71213 ; perimeter | |
| G1 X7.867 Y2.316 E889.96053 ; perimeter | |
| G1 X7.867 Y-1.326 E890.03939 ; perimeter | |
| G1 X9.399 Y-1.326 E890.07255 ; perimeter | |
| G1 X8.980 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-11.795 E890.21405 F600.000 ; perimeter | |
| G1 X10.725 Y-11.795 E890.23876 ; perimeter | |
| G1 X10.725 Y-1.805 E890.38026 ; perimeter | |
| G1 X19.820 Y-1.805 E890.50908 ; perimeter | |
| G1 X19.820 Y2.795 E890.57424 ; perimeter | |
| G1 X7.388 Y2.795 E890.75032 ; perimeter | |
| G1 X7.388 Y-1.805 E890.81548 ; perimeter | |
| G1 X8.920 Y-1.805 E890.83717 ; perimeter | |
| G1 X9.380 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X9.313 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E891.11928 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P42 ; update progress | |
| G1 F2100.000 E886.11928 ; retract | |
| G1 Z8.400 F7800.000 ; move to next layer (79) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E891.11928 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E891.14805 F4800.000 ; perimeter | |
| G1 X6.988 Y1.159 E891.39041 ; perimeter | |
| G1 X6.972 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 X-18.184 Y1.159 E891.93498 F4800.000 ; perimeter | |
| G1 X-18.184 Y-0.169 E891.96374 ; perimeter | |
| G1 X6.972 Y-0.169 E892.50831 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-0.169 E892.50910 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y1.159 F7800.000 ; move to first perimeter point | |
| M126 ; enable fan | |
| G1 X6.972 Y1.159 E892.50988 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 X18.124 Y-0.169 E892.75095 F4800.000 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E892.80476 F4800.000 ; perimeter | |
| G1 X6.988 Y1.738 E893.05966 ; perimeter | |
| G1 X6.972 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E893.61675 F4800.000 ; perimeter | |
| G1 X-18.763 Y-0.748 E893.67056 ; perimeter | |
| G1 X6.972 Y-0.748 E894.22765 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-0.748 E894.22844 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y1.738 F7800.000 ; move to first perimeter point | |
| M126 ; enable fan | |
| G1 X6.972 Y1.738 E894.22922 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.703 Y-0.748 E894.48282 F4800.000 ; perimeter | |
| G1 X10.157 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E894.68165 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E894.76051 ; perimeter | |
| G1 X6.988 Y2.316 E895.02792 ; perimeter | |
| G1 X6.972 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E895.59754 F4800.000 ; perimeter | |
| G1 X-19.341 Y-1.326 E895.67640 ; perimeter | |
| G1 X3.803 Y-1.326 E896.17743 ; perimeter | |
| G1 X3.803 Y-11.316 E896.39369 ; perimeter | |
| G1 X4.501 Y-11.316 E896.40880 ; perimeter | |
| G1 X4.501 Y-1.326 E896.62506 ; perimeter | |
| G1 X6.972 Y-1.326 E896.67853 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-1.326 E896.67932 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y2.316 F7800.000 ; move to first perimeter point | |
| M126 ; enable fan | |
| G1 X6.972 Y2.316 E896.68011 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X9.459 Y-1.326 E896.73358 F4800.000 ; perimeter | |
| G1 X9.459 Y-11.316 E896.94984 ; perimeter | |
| G1 X10.157 Y-11.316 E896.96495 ; perimeter | |
| G1 X10.157 Y-1.386 E897.17991 ; perimeter | |
| G1 X10.635 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E897.31001 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E897.37516 ; perimeter | |
| G1 X6.988 Y2.795 E897.55691 ; perimeter | |
| G1 X6.972 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E897.93639 F1200.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E898.00154 ; perimeter | |
| G1 X3.325 Y-1.805 E898.32937 ; perimeter | |
| G1 X3.325 Y-11.795 E898.47087 ; perimeter | |
| G1 X4.980 Y-11.795 E898.49431 ; perimeter | |
| G1 X4.980 Y-1.805 E898.63581 ; perimeter | |
| G1 X6.972 Y-1.805 E898.66402 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-1.805 E898.66481 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y2.795 F7800.000 ; move to first perimeter point | |
| M126 ; enable fan | |
| G1 X6.972 Y2.795 E898.66559 F600.000 ; perimeter | |
| M126 ; enable fan | |
| G1 X6.988 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X8.980 Y-1.805 E898.69380 F1200.000 ; perimeter | |
| G1 X8.980 Y-11.795 E898.83530 ; perimeter | |
| G1 X10.635 Y-11.795 E898.85874 ; perimeter | |
| G1 X10.635 Y-1.865 E898.99939 ; perimeter | |
| G1 X6.942 Y-1.408 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E900.17592 F600.000 ; fill | |
| M73 P43 ; update progress | |
| G1 F2100.000 E895.17592 ; retract | |
| G1 Z8.400 F7800.000 ; move to next layer (27) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E900.17592 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E900.18222 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E900.18294 ; support material | |
| G1 X-20.018 Y4.016 E900.18924 ; support material | |
| G1 X-19.991 Y3.974 E900.18995 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E900.20836 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E900.22111 ; support material | |
| G1 X-21.520 Y4.395 E900.25086 ; support material | |
| G1 X-19.420 Y4.395 E900.28060 ; support material | |
| G1 X-19.420 Y3.595 E900.29193 ; support material | |
| G1 X-20.620 Y3.595 E900.30893 ; support material | |
| G1 F2100.000 E895.30893 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E900.30893 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E900.32092 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E900.32721 ; support material | |
| G1 X-21.141 Y9.644 E900.33742 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E900.34927 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E900.41009 ; support material | |
| G1 X-20.844 Y9.883 E900.42606 ; support material | |
| G1 X-19.749 Y11.916 E900.45877 ; support material | |
| G1 X-20.490 Y13.116 E900.47875 ; support material | |
| G1 X-20.045 Y13.116 E900.48505 ; support material | |
| G1 X-19.427 Y12.115 E900.50172 ; support material | |
| G1 X-17.119 Y12.183 E900.53443 ; support material | |
| G1 X-15.561 Y9.660 E900.57643 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E900.59645 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E900.60275 ; support material | |
| G1 X-12.930 Y9.927 E900.61945 ; support material | |
| G1 X-15.239 Y9.859 E900.65216 ; support material | |
| G1 X-16.796 Y12.382 E900.69416 ; support material | |
| G1 X-16.401 Y13.116 E900.70598 ; support material | |
| G1 X-12.104 Y13.116 E900.76683 ; support material | |
| G1 X-11.513 Y12.159 E900.78277 ; support material | |
| G1 X-12.608 Y10.126 E900.81548 ; support material | |
| G1 F2100.000 E895.81548 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E900.81548 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E900.82681 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E900.85656 ; support material | |
| G1 X-11.520 Y4.395 E900.86789 ; support material | |
| G1 X-9.420 Y4.395 E900.89763 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E900.89824 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E900.91726 ; support material | |
| G1 X-11.141 Y4.016 E900.91787 ; support material | |
| G1 X-9.799 Y4.016 E900.93689 ; support material | |
| G1 F2100.000 E895.93689 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E900.93689 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E900.97018 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E900.99046 ; support material | |
| G1 X-4.891 Y8.924 E901.00113 ; support material | |
| G1 X-7.853 Y8.924 E901.04307 ; support material | |
| G1 X-7.325 Y9.903 E901.05883 ; support material | |
| G1 X-8.883 Y12.426 E901.10083 ; support material | |
| G1 X-11.191 Y12.358 E901.13354 ; support material | |
| G1 X-11.659 Y13.116 E901.14616 ; support material | |
| G1 X-8.296 Y13.116 E901.19381 ; support material | |
| G1 X-8.561 Y12.625 E901.20171 ; support material | |
| G1 X-7.003 Y10.102 E901.24371 ; support material | |
| G1 X-4.695 Y10.170 E901.27642 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E901.30821 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E901.34874 ; support material | |
| G1 X-4.372 Y10.369 E901.38534 ; support material | |
| G1 X-3.277 Y12.402 E901.41805 ; support material | |
| G1 X-3.718 Y13.116 E901.42994 ; support material | |
| G1 X-3.273 Y13.116 E901.43625 ; support material | |
| G1 X-2.955 Y12.601 E901.44483 ; support material | |
| G1 X-0.647 Y12.669 E901.47754 ; support material | |
| G1 X0.911 Y10.146 E901.51954 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E901.53138 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E901.64298 ; support material | |
| G1 X-5.270 Y8.545 E901.65365 ; support material | |
| G1 X-21.520 Y8.545 E901.88382 ; support material | |
| G1 X-21.520 Y13.495 E901.95393 ; support material | |
| G1 X21.520 Y13.495 E902.56355 ; support material | |
| G1 X21.520 Y8.545 E902.63366 ; support material | |
| G1 X2.246 Y8.545 E902.90666 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E902.91296 F600.000 ; support material | |
| G1 X3.541 Y10.413 E902.93775 ; support material | |
| G1 X1.233 Y10.345 E902.97046 ; support material | |
| G1 X-0.325 Y12.868 E903.01246 ; support material | |
| G1 X-0.191 Y13.116 E903.01646 ; support material | |
| G1 X4.668 Y13.116 E903.08527 ; support material | |
| G1 X4.959 Y12.645 E903.09312 ; support material | |
| G1 X3.863 Y10.612 E903.12583 ; support material | |
| G1 X4.906 Y8.924 E903.15394 ; support material | |
| G1 F2100.000 E898.15394 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E903.15394 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E903.16527 F600.000 ; support material | |
| G1 X9.236 Y3.595 E903.18430 ; support material | |
| G1 X8.851 Y4.395 E903.19687 ; support material | |
| G1 X10.580 Y4.395 E903.22136 ; support material | |
| G1 F2100.000 E898.22136 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E903.22136 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E903.28495 F600.000 ; support material | |
| G1 X9.147 Y10.389 E903.30853 ; support material | |
| G1 X7.589 Y12.912 E903.35052 ; support material | |
| G1 X5.281 Y12.844 E903.38323 ; support material | |
| G1 X5.112 Y13.116 E903.38777 ; support material | |
| G1 X7.914 Y13.116 E903.42746 ; support material | |
| G1 X9.469 Y10.588 E903.46950 ; support material | |
| G1 X11.777 Y10.656 E903.50221 ; support material | |
| G1 X12.847 Y8.924 E903.53105 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E903.57596 F600.000 ; support material | |
| G1 X12.099 Y10.855 E903.60811 ; support material | |
| G1 X13.195 Y12.888 E903.64082 ; support material | |
| G1 X13.054 Y13.116 E903.64462 ; support material | |
| G1 X13.498 Y13.116 E903.65092 ; support material | |
| G1 X13.517 Y13.087 E903.65141 ; support material | |
| G1 X14.519 Y13.116 E903.66562 ; support material | |
| G1 X15.849 Y13.116 E903.68445 ; support material | |
| G1 X17.383 Y10.632 E903.72581 ; support material | |
| G1 X16.462 Y8.924 E903.75329 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E903.76350 F600.000 ; support material | |
| G1 X20.013 Y10.899 E903.79392 ; support material | |
| G1 X17.705 Y10.831 E903.82663 ; support material | |
| G1 X16.294 Y13.116 E903.86468 ; support material | |
| G1 X21.141 Y13.116 E903.93334 ; support material | |
| G1 X21.141 Y12.595 E903.94074 ; support material | |
| G1 X20.335 Y11.098 E903.96482 ; support material | |
| G1 X21.141 Y9.792 E903.98655 ; support material | |
| G1 F2100.000 E898.98655 ; retract | |
| G1 Z8.400 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.200 F7800.000 ; restore layer Z | |
| G1 E903.98655 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E903.99788 F600.000 ; support material | |
| G1 X18.480 Y3.595 E904.02763 ; support material | |
| G1 X18.480 Y4.395 E904.03896 ; support material | |
| G1 X20.580 Y4.395 E904.06870 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E904.06931 F600.000 ; support material | |
| G1 X18.859 Y3.974 E904.08833 ; support material | |
| G1 X18.859 Y4.016 E904.08894 ; support material | |
| G1 X20.201 Y4.016 E904.10796 ; support material | |
| M126 ; enable fan | |
| M73 P43 ; update progress | |
| G1 F2100.000 E899.10796 ; retract | |
| G1 Z8.500 F7800.000 ; move to next layer (80) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z8.300 F7800.000 ; restore layer Z | |
| G1 E904.10796 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E904.89526 F2159.384 ; perimeter | |
| G1 X-18.184 Y-0.169 E904.92402 ; perimeter | |
| G1 X18.184 Y-0.169 E905.71132 ; perimeter | |
| G1 X18.184 Y1.099 E905.73879 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E906.55113 F2159.384 ; perimeter | |
| G1 X-18.763 Y-0.748 E906.60494 ; perimeter | |
| G1 X18.763 Y-0.748 E907.41729 ; perimeter | |
| G1 X18.763 Y1.678 E907.46980 ; perimeter | |
| G1 X10.066 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E907.67058 F2159.384 ; perimeter | |
| G1 X19.341 Y2.316 E907.74944 ; perimeter | |
| G1 X-19.341 Y2.316 E908.58684 ; perimeter | |
| G1 X-19.341 Y-1.326 E908.66570 ; perimeter | |
| G1 X3.894 Y-1.326 E909.16868 ; perimeter | |
| G1 X3.894 Y-11.316 E909.38494 ; perimeter | |
| G1 X4.501 Y-11.316 E909.39810 ; perimeter | |
| G1 X4.501 Y-1.326 E909.61436 ; perimeter | |
| G1 X9.459 Y-1.326 E909.72167 ; perimeter | |
| G1 X9.459 Y-11.316 E909.93793 ; perimeter | |
| G1 X10.066 Y-11.316 E909.95109 ; perimeter | |
| G1 X10.066 Y-1.386 E910.16605 ; perimeter | |
| G1 X10.545 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E910.29742 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E910.36257 ; perimeter | |
| G1 X-19.820 Y2.795 E910.92404 ; perimeter | |
| G1 X-19.820 Y-1.805 E910.98919 ; perimeter | |
| G1 X3.415 Y-1.805 E911.31829 ; perimeter | |
| G1 X3.415 Y-11.795 E911.45979 ; perimeter | |
| G1 X4.980 Y-11.795 E911.48196 ; perimeter | |
| G1 X4.980 Y-1.805 E911.62346 ; perimeter | |
| G1 X8.980 Y-1.805 E911.68011 ; perimeter | |
| G1 X8.980 Y-11.795 E911.82161 ; perimeter | |
| G1 X10.545 Y-11.795 E911.84378 ; perimeter | |
| G1 X10.545 Y-1.865 E911.98443 ; perimeter | |
| G1 X10.545 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E913.16096 F600.000 ; fill | |
| M73 P43 ; update progress | |
| G1 F2100.000 E908.16096 ; retract | |
| G1 Z8.600 F7800.000 ; move to next layer (81) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.400 F7800.000 ; restore layer Z | |
| G1 E913.16096 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E913.94826 F2159.384 ; perimeter | |
| G1 X18.184 Y1.159 E913.97702 ; perimeter | |
| G1 X-18.184 Y1.159 E914.76432 ; perimeter | |
| G1 X-18.184 Y-0.109 E914.79178 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E915.60413 F2159.384 ; perimeter | |
| G1 X18.763 Y1.738 E915.65794 ; perimeter | |
| G1 X-18.763 Y1.738 E916.47028 ; perimeter | |
| G1 X-18.763 Y-0.688 E916.52280 ; perimeter | |
| G1 X3.984 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X3.984 Y-11.316 E916.73906 F2159.384 ; perimeter | |
| G1 X4.501 Y-11.316 E916.75027 ; perimeter | |
| G1 X4.501 Y-1.326 E916.96653 ; perimeter | |
| G1 X9.459 Y-1.326 E917.07384 ; perimeter | |
| G1 X9.459 Y-11.316 E917.29010 ; perimeter | |
| G1 X9.976 Y-11.316 E917.30131 ; perimeter | |
| G1 X9.976 Y-1.326 E917.51757 ; perimeter | |
| G1 X19.341 Y-1.326 E917.72030 ; perimeter | |
| G1 X19.341 Y2.316 E917.79916 ; perimeter | |
| G1 X-19.341 Y2.316 E918.63655 ; perimeter | |
| G1 X-19.341 Y-1.326 E918.71541 ; perimeter | |
| G1 X3.924 Y-1.326 E919.21904 ; perimeter | |
| G1 X3.505 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.505 Y-11.795 E919.36054 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E919.38143 ; perimeter | |
| G1 X4.980 Y-1.805 E919.52293 ; perimeter | |
| G1 X8.980 Y-1.805 E919.57959 ; perimeter | |
| G1 X8.980 Y-11.795 E919.72109 ; perimeter | |
| G1 X10.455 Y-11.795 E919.74198 ; perimeter | |
| G1 X10.455 Y-1.805 E919.88348 ; perimeter | |
| G1 X19.820 Y-1.805 E920.01613 ; perimeter | |
| G1 X19.820 Y2.795 E920.08128 ; perimeter | |
| G1 X-19.820 Y2.795 E920.64274 ; perimeter | |
| G1 X-19.820 Y-1.805 E920.70790 ; perimeter | |
| G1 X3.445 Y-1.805 E921.03743 ; perimeter | |
| G1 X3.905 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E922.21395 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P44 ; update progress | |
| G1 F2100.000 E917.21395 ; retract | |
| G1 Z8.700 F7800.000 ; move to next layer (82) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E922.21395 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E923.00125 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E923.03002 ; perimeter | |
| G1 X-18.184 Y1.159 E923.81731 ; perimeter | |
| G1 X-18.184 Y-0.109 E923.84478 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E924.65712 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E924.71093 ; perimeter | |
| G1 X-18.763 Y1.738 E925.52328 ; perimeter | |
| G1 X-18.763 Y-0.688 E925.57579 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E926.41319 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E926.49205 ; perimeter | |
| G1 X-19.341 Y2.316 E927.32944 ; perimeter | |
| G1 X-19.341 Y-1.266 E927.40700 ; perimeter | |
| G1 X3.595 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.595 Y-11.795 E927.54850 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E927.56812 ; perimeter | |
| G1 X4.980 Y-1.805 E927.70961 ; perimeter | |
| G1 X8.980 Y-1.805 E927.76627 ; perimeter | |
| G1 X8.980 Y-11.795 E927.90777 ; perimeter | |
| G1 X10.365 Y-11.795 E927.92739 ; perimeter | |
| G1 X10.365 Y-1.805 E928.06889 ; perimeter | |
| G1 X19.820 Y-1.805 E928.20281 ; perimeter | |
| G1 X19.820 Y2.795 E928.26796 ; perimeter | |
| G1 X-19.820 Y2.795 E928.82943 ; perimeter | |
| G1 X-19.820 Y-1.805 E928.89458 ; perimeter | |
| G1 X3.535 Y-1.805 E929.22538 ; perimeter | |
| G1 X3.995 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E930.40191 F600.000 ; fill | |
| G1 X9.672 Y-1.616 F7800.000 ; move to first fill point | |
| G1 X9.672 Y-11.506 E930.72702 F600.000 ; fill | |
| G1 F2100.000 E925.72702 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X4.288 Y-11.506 F7800.000 ; move to first fill point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E930.72702 F2100.000 ; compensate retraction | |
| G1 X4.288 Y-1.616 E931.05214 F600.000 ; fill | |
| M73 P44 ; update progress | |
| G1 F2100.000 E926.05214 ; retract | |
| G1 Z8.700 F7800.000 ; move to next layer (28) and lift | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E931.05214 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E931.06347 F600.000 ; support material | |
| G1 X9.236 Y3.595 E931.08250 ; support material | |
| G1 X8.851 Y4.395 E931.09507 ; support material | |
| G1 X10.580 Y4.395 E931.11956 ; support material | |
| G1 F2100.000 E926.11956 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E931.11956 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E931.18315 F600.000 ; support material | |
| G1 X9.147 Y10.389 E931.20673 ; support material | |
| G1 X7.589 Y12.912 E931.24873 ; support material | |
| G1 X5.281 Y12.844 E931.28144 ; support material | |
| G1 X5.112 Y13.116 E931.28597 ; support material | |
| G1 X7.914 Y13.116 E931.32566 ; support material | |
| G1 X9.469 Y10.588 E931.36770 ; support material | |
| G1 X11.777 Y10.656 E931.40041 ; support material | |
| G1 X12.847 Y8.924 E931.42925 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E931.47416 F600.000 ; support material | |
| G1 X12.099 Y10.855 E931.50631 ; support material | |
| G1 X13.195 Y12.888 E931.53902 ; support material | |
| G1 X13.054 Y13.116 E931.54282 ; support material | |
| G1 X13.498 Y13.116 E931.54912 ; support material | |
| G1 X13.517 Y13.087 E931.54961 ; support material | |
| G1 X14.519 Y13.116 E931.56382 ; support material | |
| G1 X15.849 Y13.116 E931.58265 ; support material | |
| G1 X17.383 Y10.632 E931.62401 ; support material | |
| G1 X16.462 Y8.924 E931.65150 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E931.66170 F600.000 ; support material | |
| G1 X20.013 Y10.899 E931.69212 ; support material | |
| G1 X17.705 Y10.831 E931.72483 ; support material | |
| G1 X16.294 Y13.116 E931.76288 ; support material | |
| G1 X21.141 Y13.116 E931.83154 ; support material | |
| G1 X21.141 Y12.595 E931.83894 ; support material | |
| G1 X20.335 Y11.098 E931.86302 ; support material | |
| G1 X21.141 Y9.792 E931.88475 ; support material | |
| G1 F2100.000 E926.88475 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E931.88475 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E931.89609 F600.000 ; support material | |
| G1 X18.480 Y3.595 E931.92583 ; support material | |
| G1 X18.480 Y4.395 E931.93716 ; support material | |
| G1 X20.580 Y4.395 E931.96691 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E931.96751 F600.000 ; support material | |
| G1 X18.859 Y3.974 E931.98654 ; support material | |
| G1 X18.859 Y4.016 E931.98714 ; support material | |
| G1 X20.201 Y4.016 E932.00616 ; support material | |
| G1 F2100.000 E927.00616 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E932.00616 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E932.01247 F600.000 ; support material | |
| G1 X3.541 Y10.413 E932.03726 ; support material | |
| G1 X1.233 Y10.345 E932.06997 ; support material | |
| G1 X-0.325 Y12.868 E932.11197 ; support material | |
| G1 X-0.191 Y13.116 E932.11597 ; support material | |
| G1 X4.668 Y13.116 E932.18478 ; support material | |
| G1 X4.959 Y12.645 E932.19263 ; support material | |
| G1 X3.863 Y10.612 E932.22534 ; support material | |
| G1 X4.906 Y8.924 E932.25344 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E932.26529 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E932.37689 ; support material | |
| G1 X-5.270 Y8.545 E932.38756 ; support material | |
| G1 X-21.520 Y8.545 E932.61772 ; support material | |
| G1 X-21.520 Y13.495 E932.68784 ; support material | |
| G1 X21.520 Y13.495 E933.29746 ; support material | |
| G1 X21.520 Y8.545 E933.36757 ; support material | |
| G1 X2.246 Y8.545 E933.64056 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E933.67235 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E933.71288 ; support material | |
| G1 X-4.372 Y10.369 E933.74948 ; support material | |
| G1 X-3.277 Y12.402 E933.78220 ; support material | |
| G1 X-3.718 Y13.116 E933.79409 ; support material | |
| G1 X-3.273 Y13.116 E933.80039 ; support material | |
| G1 X-2.955 Y12.601 E933.80897 ; support material | |
| G1 X-0.647 Y12.669 E933.84168 ; support material | |
| G1 X0.911 Y10.146 E933.88368 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E933.91697 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E933.93724 ; support material | |
| G1 X-4.891 Y8.924 E933.94792 ; support material | |
| G1 X-7.853 Y8.924 E933.98986 ; support material | |
| G1 X-7.325 Y9.903 E934.00562 ; support material | |
| G1 X-8.883 Y12.426 E934.04762 ; support material | |
| G1 X-11.191 Y12.358 E934.08033 ; support material | |
| G1 X-11.659 Y13.116 E934.09295 ; support material | |
| G1 X-8.296 Y13.116 E934.14059 ; support material | |
| G1 X-8.561 Y12.625 E934.14850 ; support material | |
| G1 X-7.003 Y10.102 E934.19050 ; support material | |
| G1 X-4.695 Y10.170 E934.22321 ; support material | |
| G1 F2100.000 E929.22321 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E934.22321 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E934.23454 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E934.26429 ; support material | |
| G1 X-11.520 Y4.395 E934.27562 ; support material | |
| G1 X-9.420 Y4.395 E934.30536 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E934.30597 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E934.32499 ; support material | |
| G1 X-11.141 Y4.016 E934.32560 ; support material | |
| G1 X-9.799 Y4.016 E934.34462 ; support material | |
| G1 F2100.000 E929.34462 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E934.34462 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E934.36463 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E934.37094 ; support material | |
| G1 X-12.930 Y9.927 E934.38764 ; support material | |
| G1 X-15.239 Y9.859 E934.42035 ; support material | |
| G1 X-16.796 Y12.382 E934.46235 ; support material | |
| G1 X-16.401 Y13.116 E934.47417 ; support material | |
| G1 X-12.104 Y13.116 E934.53502 ; support material | |
| G1 X-11.513 Y12.159 E934.55096 ; support material | |
| G1 X-12.608 Y10.126 E934.58367 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E934.59552 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E934.65634 ; support material | |
| G1 X-20.844 Y9.883 E934.67231 ; support material | |
| G1 X-19.749 Y11.916 E934.70502 ; support material | |
| G1 X-20.490 Y13.116 E934.72500 ; support material | |
| G1 X-20.045 Y13.116 E934.73131 ; support material | |
| G1 X-19.427 Y12.115 E934.74798 ; support material | |
| G1 X-17.119 Y12.183 E934.78069 ; support material | |
| G1 X-15.561 Y9.660 E934.82268 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E934.83467 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E934.84097 ; support material | |
| G1 X-21.141 Y9.644 E934.85117 ; support material | |
| G1 F2100.000 E929.85117 ; retract | |
| G1 Z8.700 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z8.500 F7800.000 ; restore layer Z | |
| G1 E934.85117 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E934.85747 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E934.85819 ; support material | |
| G1 X-20.018 Y4.016 E934.86449 ; support material | |
| G1 X-19.991 Y3.974 E934.86520 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E934.88361 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E934.89636 ; support material | |
| G1 X-21.520 Y4.395 E934.92611 ; support material | |
| G1 X-19.420 Y4.395 E934.95585 ; support material | |
| G1 X-19.420 Y3.595 E934.96718 ; support material | |
| G1 X-20.620 Y3.595 E934.98418 ; support material | |
| M126 ; enable fan | |
| M73 P45 ; update progress | |
| G1 F2100.000 E929.98418 ; retract | |
| G1 Z8.800 F7800.000 ; move to next layer (83) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z8.600 F7800.000 ; restore layer Z | |
| G1 E934.98418 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E935.01294 F2395.943 ; perimeter | |
| G1 X18.184 Y-0.169 E935.80024 ; perimeter | |
| G1 X18.184 Y1.159 E935.82901 ; perimeter | |
| G1 X-18.124 Y1.159 E936.61500 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E936.66882 F2395.943 ; perimeter | |
| G1 X18.763 Y-0.748 E937.48116 ; perimeter | |
| G1 X18.763 Y1.738 E937.53497 ; perimeter | |
| G1 X-18.703 Y1.738 E938.34602 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E938.42488 F2395.943 ; perimeter | |
| G1 X19.341 Y-1.326 E939.26227 ; perimeter | |
| G1 X19.341 Y2.316 E939.34113 ; perimeter | |
| G1 X-19.281 Y2.316 E940.17723 ; perimeter | |
| G1 X3.685 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X3.685 Y-11.795 E940.31872 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E940.33707 ; perimeter | |
| G1 X4.980 Y-1.805 E940.47856 ; perimeter | |
| G1 X8.980 Y-1.805 E940.53522 ; perimeter | |
| G1 X8.980 Y-11.795 E940.67672 ; perimeter | |
| G1 X10.275 Y-11.795 E940.69506 ; perimeter | |
| G1 X10.275 Y-1.805 E940.83656 ; perimeter | |
| G1 X19.820 Y-1.805 E940.97176 ; perimeter | |
| G1 X19.820 Y2.795 E941.03691 ; perimeter | |
| G1 X-19.820 Y2.795 E941.59838 ; perimeter | |
| G1 X-19.820 Y-1.805 E941.66353 ; perimeter | |
| G1 X3.625 Y-1.805 E941.99561 ; perimeter | |
| G1 X4.085 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E943.17214 F600.000 ; fill | |
| G1 X9.627 Y-1.616 F7800.000 ; move to first fill point | |
| G1 X9.627 Y-11.506 E943.49725 F600.000 ; fill | |
| G1 F2100.000 E938.49725 ; retract | |
| G1 Z8.800 F7800.000 ; lift plate during travel | |
| G1 X4.333 Y-11.506 F7800.000 ; move to first fill point | |
| G1 Z8.600 F7800.000 ; restore layer Z | |
| G1 E943.49725 F2100.000 ; compensate retraction | |
| G1 X4.333 Y-1.616 E943.82236 F600.000 ; fill | |
| M73 P45 ; update progress | |
| G1 F2100.000 E938.82236 ; retract | |
| G1 Z8.900 F7800.000 ; move to next layer (84) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.700 F7800.000 ; restore layer Z | |
| G1 E943.82236 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E943.85113 F2395.943 ; perimeter | |
| G1 X-18.184 Y1.159 E944.63842 ; perimeter | |
| G1 X-18.184 Y-0.169 E944.66719 ; perimeter | |
| G1 X18.124 Y-0.169 E945.45319 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E945.50700 F2395.943 ; perimeter | |
| G1 X-18.763 Y1.738 E946.31934 ; perimeter | |
| G1 X-18.763 Y-0.748 E946.37316 ; perimeter | |
| G1 X18.703 Y-0.748 E947.18420 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E947.26306 F2395.943 ; perimeter | |
| G1 X-19.341 Y2.316 E948.10045 ; perimeter | |
| G1 X-19.341 Y-1.326 E948.17931 ; perimeter | |
| G1 X19.281 Y-1.326 E949.01541 ; perimeter | |
| G1 X10.185 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E949.15188 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E949.21704 ; perimeter | |
| G1 X-19.820 Y2.795 E949.77850 ; perimeter | |
| G1 X-19.820 Y-1.805 E949.84365 ; perimeter | |
| G1 X3.775 Y-1.805 E950.17786 ; perimeter | |
| G1 X3.775 Y-11.795 E950.31936 ; perimeter | |
| G1 X4.980 Y-11.795 E950.33642 ; perimeter | |
| G1 X4.980 Y-1.805 E950.47792 ; perimeter | |
| G1 X8.980 Y-1.805 E950.53458 ; perimeter | |
| G1 X8.980 Y-11.795 E950.67608 ; perimeter | |
| G1 X10.185 Y-11.795 E950.69314 ; perimeter | |
| G1 X10.185 Y-1.865 E950.83379 ; perimeter | |
| G1 X10.185 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E952.01032 F600.000 ; fill | |
| G1 X9.582 Y-1.616 F7800.000 ; move to first fill point | |
| G1 X9.582 Y-11.506 E952.33543 F600.000 ; fill | |
| G1 F2100.000 E947.33543 ; retract | |
| G1 Z8.900 F7800.000 ; lift plate during travel | |
| G1 X4.378 Y-11.506 F7800.000 ; move to first fill point | |
| G1 Z8.700 F7800.000 ; restore layer Z | |
| G1 E952.33543 F2100.000 ; compensate retraction | |
| G1 X4.378 Y-1.616 E952.66054 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P45 ; update progress | |
| G1 F2100.000 E947.66054 ; retract | |
| G1 Z9.000 F7800.000 ; move to next layer (85) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E952.66054 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E952.68931 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E953.47661 ; perimeter | |
| G1 X-18.184 Y-0.169 E953.50537 ; perimeter | |
| G1 X18.124 Y-0.169 E954.29137 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E954.34518 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E955.15753 ; perimeter | |
| G1 X-18.763 Y-0.748 E955.21134 ; perimeter | |
| G1 X18.703 Y-0.748 E956.02238 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E956.10124 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E956.93864 ; perimeter | |
| G1 X-19.341 Y-1.326 E957.01750 ; perimeter | |
| G1 X19.281 Y-1.326 E957.85359 ; perimeter | |
| G1 X10.079 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E957.99157 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E958.05672 ; perimeter | |
| G1 X-19.820 Y2.795 E958.61819 ; perimeter | |
| G1 X-19.820 Y-1.805 E958.68334 ; perimeter | |
| G1 X3.881 Y-1.805 E959.01905 ; perimeter | |
| G1 X3.881 Y-11.795 E959.16055 ; perimeter | |
| G1 X4.980 Y-11.795 E959.17611 ; perimeter | |
| G1 X4.980 Y-1.805 E959.31761 ; perimeter | |
| G1 X8.980 Y-1.805 E959.37427 ; perimeter | |
| G1 X8.980 Y-11.795 E959.51577 ; perimeter | |
| G1 X10.079 Y-11.795 E959.53132 ; perimeter | |
| G1 X10.079 Y-1.865 E959.67197 ; perimeter | |
| G1 X10.079 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E960.84850 F600.000 ; fill | |
| G1 X9.529 Y-1.616 F7800.000 ; move to first fill point | |
| G1 X9.529 Y-11.506 E960.95158 F600.000 ; fill | |
| G1 F2100.000 E955.95158 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X4.431 Y-11.506 F7800.000 ; move to first fill point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E960.95158 F2100.000 ; compensate retraction | |
| G1 X4.431 Y-1.616 E961.05466 F600.000 ; fill | |
| M73 P46 ; update progress | |
| G1 F2100.000 E956.05466 ; retract | |
| G1 Z9.000 F7800.000 ; move to next layer (29) and lift | |
| G1 X10.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E961.05466 F2100.000 ; compensate retraction | |
| G1 X10.580 Y3.595 E961.06599 F600.000 ; support material | |
| G1 X9.236 Y3.595 E961.08502 ; support material | |
| G1 X8.851 Y4.395 E961.09759 ; support material | |
| G1 X10.580 Y4.395 E961.12208 ; support material | |
| G1 F2100.000 E956.12208 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E961.12208 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E961.18567 F600.000 ; support material | |
| G1 X9.147 Y10.389 E961.20925 ; support material | |
| G1 X7.589 Y12.912 E961.25124 ; support material | |
| G1 X5.281 Y12.844 E961.28395 ; support material | |
| G1 X5.112 Y13.116 E961.28849 ; support material | |
| G1 X7.914 Y13.116 E961.32818 ; support material | |
| G1 X9.469 Y10.588 E961.37022 ; support material | |
| G1 X11.777 Y10.656 E961.40293 ; support material | |
| G1 X12.847 Y8.924 E961.43177 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E961.47668 F600.000 ; support material | |
| G1 X12.099 Y10.855 E961.50883 ; support material | |
| G1 X13.195 Y12.888 E961.54154 ; support material | |
| G1 X13.054 Y13.116 E961.54534 ; support material | |
| G1 X13.498 Y13.116 E961.55164 ; support material | |
| G1 X13.517 Y13.087 E961.55213 ; support material | |
| G1 X14.519 Y13.116 E961.56634 ; support material | |
| G1 X15.849 Y13.116 E961.58517 ; support material | |
| G1 X17.383 Y10.632 E961.62653 ; support material | |
| G1 X16.462 Y8.924 E961.65401 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E961.66422 F600.000 ; support material | |
| G1 X20.013 Y10.899 E961.69464 ; support material | |
| G1 X17.705 Y10.831 E961.72735 ; support material | |
| G1 X16.294 Y13.116 E961.76540 ; support material | |
| G1 X21.141 Y13.116 E961.83406 ; support material | |
| G1 X21.141 Y12.595 E961.84146 ; support material | |
| G1 X20.335 Y11.098 E961.86553 ; support material | |
| G1 X21.141 Y9.792 E961.88727 ; support material | |
| G1 F2100.000 E956.88727 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X20.580 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E961.88727 F2100.000 ; compensate retraction | |
| G1 X20.580 Y3.595 E961.89860 F600.000 ; support material | |
| G1 X18.480 Y3.595 E961.92835 ; support material | |
| G1 X18.480 Y4.395 E961.93968 ; support material | |
| G1 X20.580 Y4.395 E961.96942 ; support material | |
| G1 X20.201 Y4.016 F7800.000 ; move to first support material point | |
| G1 X20.201 Y3.974 E961.97003 F600.000 ; support material | |
| G1 X18.859 Y3.974 E961.98905 ; support material | |
| G1 X18.859 Y4.016 E961.98966 ; support material | |
| G1 X20.201 Y4.016 E962.00868 ; support material | |
| G1 F2100.000 E957.00868 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E962.00868 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E962.01498 F600.000 ; support material | |
| G1 X3.541 Y10.413 E962.03978 ; support material | |
| G1 X1.233 Y10.345 E962.07249 ; support material | |
| G1 X-0.325 Y12.868 E962.11449 ; support material | |
| G1 X-0.191 Y13.116 E962.11848 ; support material | |
| G1 X4.668 Y13.116 E962.18730 ; support material | |
| G1 X4.959 Y12.645 E962.19515 ; support material | |
| G1 X3.863 Y10.612 E962.22786 ; support material | |
| G1 X4.906 Y8.924 E962.25596 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E962.26780 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E962.37940 ; support material | |
| G1 X-5.270 Y8.545 E962.39008 ; support material | |
| G1 X-21.520 Y8.545 E962.62024 ; support material | |
| G1 X-21.520 Y13.495 E962.69035 ; support material | |
| G1 X21.520 Y13.495 E963.29998 ; support material | |
| G1 X21.520 Y8.545 E963.37009 ; support material | |
| G1 X2.246 Y8.545 E963.64308 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E963.67487 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E963.71540 ; support material | |
| G1 X-4.372 Y10.369 E963.75200 ; support material | |
| G1 X-3.277 Y12.402 E963.78471 ; support material | |
| G1 X-3.718 Y13.116 E963.79661 ; support material | |
| G1 X-3.273 Y13.116 E963.80291 ; support material | |
| G1 X-2.955 Y12.601 E963.81149 ; support material | |
| G1 X-0.647 Y12.669 E963.84420 ; support material | |
| G1 X0.911 Y10.146 E963.88620 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E963.91949 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E963.93976 ; support material | |
| G1 X-4.891 Y8.924 E963.95043 ; support material | |
| G1 X-7.853 Y8.924 E963.99238 ; support material | |
| G1 X-7.325 Y9.903 E964.00814 ; support material | |
| G1 X-8.883 Y12.426 E964.05013 ; support material | |
| G1 X-11.191 Y12.358 E964.08284 ; support material | |
| G1 X-11.659 Y13.116 E964.09547 ; support material | |
| G1 X-8.296 Y13.116 E964.14311 ; support material | |
| G1 X-8.561 Y12.625 E964.15102 ; support material | |
| G1 X-7.003 Y10.102 E964.19302 ; support material | |
| G1 X-4.695 Y10.170 E964.22573 ; support material | |
| G1 F2100.000 E959.22573 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X-9.420 Y4.395 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E964.22573 F2100.000 ; compensate retraction | |
| G1 X-9.420 Y3.595 E964.23706 F600.000 ; support material | |
| G1 X-11.520 Y3.595 E964.26680 ; support material | |
| G1 X-11.520 Y4.395 E964.27814 ; support material | |
| G1 X-9.420 Y4.395 E964.30788 ; support material | |
| G1 X-9.799 Y4.016 F7800.000 ; move to first support material point | |
| G1 X-9.799 Y3.974 E964.30849 F600.000 ; support material | |
| G1 X-11.141 Y3.974 E964.32751 ; support material | |
| G1 X-11.141 Y4.016 E964.32812 ; support material | |
| G1 X-9.799 Y4.016 E964.34714 ; support material | |
| G1 F2100.000 E959.34714 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E964.34714 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E964.36715 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E964.37345 ; support material | |
| G1 X-12.930 Y9.927 E964.39016 ; support material | |
| G1 X-15.239 Y9.859 E964.42287 ; support material | |
| G1 X-16.796 Y12.382 E964.46487 ; support material | |
| G1 X-16.401 Y13.116 E964.47668 ; support material | |
| G1 X-12.104 Y13.116 E964.53754 ; support material | |
| G1 X-11.513 Y12.159 E964.55348 ; support material | |
| G1 X-12.608 Y10.126 E964.58619 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E964.59804 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E964.65886 ; support material | |
| G1 X-20.844 Y9.883 E964.67483 ; support material | |
| G1 X-19.749 Y11.916 E964.70754 ; support material | |
| G1 X-20.490 Y13.116 E964.72752 ; support material | |
| G1 X-20.045 Y13.116 E964.73382 ; support material | |
| G1 X-19.427 Y12.115 E964.75050 ; support material | |
| G1 X-17.119 Y12.183 E964.78321 ; support material | |
| G1 X-15.561 Y9.660 E964.82520 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E964.83719 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E964.84349 ; support material | |
| G1 X-21.141 Y9.644 E964.85369 ; support material | |
| G1 F2100.000 E959.85369 ; retract | |
| G1 Z9.000 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z8.800 F7800.000 ; restore layer Z | |
| G1 E964.85369 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E964.85999 F600.000 ; support material | |
| G1 X-20.463 Y4.016 E964.86070 ; support material | |
| G1 X-20.018 Y4.016 E964.86701 ; support material | |
| G1 X-19.991 Y3.974 E964.86772 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E964.88613 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E964.89888 ; support material | |
| G1 X-21.520 Y4.395 E964.92863 ; support material | |
| G1 X-19.420 Y4.395 E964.95837 ; support material | |
| G1 X-19.420 Y3.595 E964.96970 ; support material | |
| G1 X-20.620 Y3.595 E964.98670 ; support material | |
| M126 ; enable fan | |
| M73 P46 ; update progress | |
| G1 F2100.000 E959.98670 ; retract | |
| G1 Z9.100 F7800.000 ; move to next layer (86) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z8.900 F7800.000 ; restore layer Z | |
| G1 E964.98670 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E965.01546 F2395.943 ; perimeter | |
| G1 X18.184 Y-0.169 E965.80276 ; perimeter | |
| G1 X18.184 Y1.159 E965.83152 ; perimeter | |
| G1 X-18.124 Y1.159 E966.61752 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E966.67133 F2395.943 ; perimeter | |
| G1 X18.763 Y-0.748 E967.48368 ; perimeter | |
| G1 X18.763 Y1.738 E967.53749 ; perimeter | |
| G1 X-18.703 Y1.738 E968.34854 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E968.42740 F2395.943 ; perimeter | |
| G1 X19.341 Y-1.326 E969.26479 ; perimeter | |
| G1 X19.341 Y2.316 E969.34365 ; perimeter | |
| G1 X-19.281 Y2.316 E970.17974 ; perimeter | |
| G1 X4.019 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.019 Y-11.795 E970.32124 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E970.33485 ; perimeter | |
| G1 X4.980 Y-1.805 E970.47635 ; perimeter | |
| G1 X8.980 Y-1.805 E970.53301 ; perimeter | |
| G1 X8.980 Y-11.795 E970.67451 ; perimeter | |
| G1 X9.941 Y-11.795 E970.68812 ; perimeter | |
| G1 X9.941 Y-1.805 E970.82962 ; perimeter | |
| G1 X19.820 Y-1.805 E970.96954 ; perimeter | |
| G1 X19.820 Y2.795 E971.03470 ; perimeter | |
| G1 X-19.820 Y2.795 E971.59616 ; perimeter | |
| G1 X-19.820 Y-1.805 E971.66132 ; perimeter | |
| G1 X3.959 Y-1.805 E971.99813 ; perimeter | |
| G1 X4.419 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E973.17466 F600.000 ; fill | |
| G1 X9.460 Y-1.616 F7800.000 ; move to first fill point | |
| G1 X9.460 Y-11.506 E973.27773 F600.000 ; fill | |
| G1 F2100.000 E968.27773 ; retract | |
| G1 Z9.100 F7800.000 ; lift plate during travel | |
| G1 X4.500 Y-11.506 F7800.000 ; move to first fill point | |
| G1 Z8.900 F7800.000 ; restore layer Z | |
| G1 E973.27773 F2100.000 ; compensate retraction | |
| G1 X4.500 Y-1.616 E973.38081 F600.000 ; fill | |
| M73 P47 ; update progress | |
| G1 F2100.000 E968.38081 ; retract | |
| G1 Z9.200 F7800.000 ; move to next layer (87) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.000 F7800.000 ; restore layer Z | |
| G1 E973.38081 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E973.40957 F2079.464 ; perimeter | |
| G1 X-18.184 Y1.159 E974.19687 ; perimeter | |
| G1 X-18.184 Y-0.169 E974.22563 ; perimeter | |
| G1 X18.124 Y-0.169 E975.01163 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E975.06544 F2079.464 ; perimeter | |
| G1 X-18.763 Y1.738 E975.87779 ; perimeter | |
| G1 X-18.763 Y-0.748 E975.93160 ; perimeter | |
| G1 X18.703 Y-0.748 E976.74265 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E976.82151 F2079.464 ; perimeter | |
| G1 X-19.341 Y2.316 E977.65890 ; perimeter | |
| G1 X-19.341 Y-1.326 E977.73776 ; perimeter | |
| G1 X19.281 Y-1.326 E978.57385 ; perimeter | |
| G1 X9.803 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E978.71573 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E978.78089 ; perimeter | |
| G1 X-19.820 Y2.795 E979.34235 ; perimeter | |
| G1 X-19.820 Y-1.805 E979.40751 ; perimeter | |
| G1 X4.157 Y-1.805 E979.74711 ; perimeter | |
| G1 X4.157 Y-11.795 E979.88861 ; perimeter | |
| G1 X4.980 Y-11.795 E979.90027 ; perimeter | |
| G1 X4.980 Y-1.805 E980.04177 ; perimeter | |
| G1 X8.980 Y-1.805 E980.09843 ; perimeter | |
| G1 X8.980 Y-11.795 E980.23993 ; perimeter | |
| G1 X9.803 Y-11.795 E980.25159 ; perimeter | |
| G1 X9.803 Y-1.865 E980.39224 ; perimeter | |
| G1 X9.803 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E981.56877 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P47 ; update progress | |
| G1 F2100.000 E976.56877 ; retract | |
| G1 Z9.300 F7800.000 ; move to next layer (88) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E981.56877 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E982.35606 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E982.38483 ; perimeter | |
| G1 X-18.184 Y1.159 E983.17212 ; perimeter | |
| G1 X-18.184 Y-0.109 E983.19959 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E984.01193 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E984.06575 ; perimeter | |
| G1 X-18.763 Y1.738 E984.87809 ; perimeter | |
| G1 X-18.763 Y-0.688 E984.93060 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E985.76800 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E985.84686 ; perimeter | |
| G1 X-19.341 Y2.316 E986.68425 ; perimeter | |
| G1 X-19.341 Y-1.266 E986.76181 ; perimeter | |
| G1 X4.294 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.294 Y-11.795 E986.90331 F1200.000 ; perimeter | |
| G1 X4.980 Y-11.795 E986.91302 ; perimeter | |
| G1 X4.980 Y-1.805 E987.05452 ; perimeter | |
| G1 X8.980 Y-1.805 E987.11118 ; perimeter | |
| G1 X8.980 Y-11.795 E987.25268 ; perimeter | |
| G1 X9.666 Y-11.795 E987.26239 ; perimeter | |
| G1 X9.666 Y-1.805 E987.40389 ; perimeter | |
| G1 X19.820 Y-1.805 E987.54771 ; perimeter | |
| G1 X19.820 Y2.795 E987.61287 ; perimeter | |
| G1 X-19.820 Y2.795 E988.17433 ; perimeter | |
| G1 X-19.820 Y-1.805 E988.23949 ; perimeter | |
| G1 X4.234 Y-1.805 E988.58020 ; perimeter | |
| G1 X4.694 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E989.75672 F600.000 ; fill | |
| M73 P47 ; update progress | |
| G1 F2100.000 E984.75672 ; retract | |
| G1 Z9.300 F7800.000 ; move to next layer (30) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E989.75672 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E989.76302 F600.000 ; support material | |
| G1 X-20.555 Y4.166 E989.76624 ; support material | |
| G1 X-20.110 Y4.166 E989.77254 ; support material | |
| G1 X-19.991 Y3.974 E989.77575 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E989.79416 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E989.80691 ; support material | |
| G1 X-21.520 Y4.545 E989.83878 ; support material | |
| G1 X-19.270 Y4.545 E989.87065 ; support material | |
| G1 X-19.270 Y3.595 E989.88410 ; support material | |
| G1 X-20.620 Y3.595 E989.90323 ; support material | |
| G1 F2100.000 E984.90323 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E989.90323 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E989.91521 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E989.92151 ; support material | |
| G1 X-21.141 Y9.644 E989.93171 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E989.94356 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E990.00438 ; support material | |
| G1 X-20.844 Y9.883 E990.02035 ; support material | |
| G1 X-19.749 Y11.916 E990.05306 ; support material | |
| G1 X-20.490 Y13.116 E990.07305 ; support material | |
| G1 X-20.045 Y13.116 E990.07935 ; support material | |
| G1 X-19.427 Y12.115 E990.09602 ; support material | |
| G1 X-17.119 Y12.183 E990.12873 ; support material | |
| G1 X-15.561 Y9.660 E990.17073 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E990.19074 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E990.19704 ; support material | |
| G1 X-12.930 Y9.927 E990.21375 ; support material | |
| G1 X-15.239 Y9.859 E990.24646 ; support material | |
| G1 X-16.796 Y12.382 E990.28845 ; support material | |
| G1 X-16.401 Y13.116 E990.30027 ; support material | |
| G1 X-12.104 Y13.116 E990.36113 ; support material | |
| G1 X-11.513 Y12.159 E990.37706 ; support material | |
| G1 X-12.608 Y10.126 E990.40977 ; support material | |
| G1 F2100.000 E985.40977 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X-9.270 Y4.545 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E990.40977 F2100.000 ; compensate retraction | |
| G1 X-9.270 Y3.595 E990.42323 F600.000 ; support material | |
| G1 X-11.670 Y3.595 E990.45722 ; support material | |
| G1 X-11.670 Y4.545 E990.47068 ; support material | |
| G1 X-9.270 Y4.545 E990.50467 ; support material | |
| G1 X-9.649 Y4.166 F7800.000 ; move to first support material point | |
| G1 X-9.649 Y3.974 E990.50741 F600.000 ; support material | |
| G1 X-11.291 Y3.974 E990.53068 ; support material | |
| G1 X-11.291 Y4.166 E990.53341 ; support material | |
| G1 X-9.649 Y4.166 E990.55668 ; support material | |
| G1 F2100.000 E985.55668 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E990.55668 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E990.58997 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E990.61025 ; support material | |
| G1 X-4.891 Y8.924 E990.62092 ; support material | |
| G1 X-7.853 Y8.924 E990.66286 ; support material | |
| G1 X-7.325 Y9.903 E990.67862 ; support material | |
| G1 X-8.883 Y12.426 E990.72062 ; support material | |
| G1 X-11.191 Y12.358 E990.75333 ; support material | |
| G1 X-11.659 Y13.116 E990.76595 ; support material | |
| G1 X-8.296 Y13.116 E990.81360 ; support material | |
| G1 X-8.561 Y12.625 E990.82151 ; support material | |
| G1 X-7.003 Y10.102 E990.86350 ; support material | |
| G1 X-4.695 Y10.170 E990.89621 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E990.92800 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E990.96853 ; support material | |
| G1 X-4.372 Y10.369 E991.00513 ; support material | |
| G1 X-3.277 Y12.402 E991.03784 ; support material | |
| G1 X-3.718 Y13.116 E991.04974 ; support material | |
| G1 X-3.273 Y13.116 E991.05604 ; support material | |
| G1 X-2.955 Y12.601 E991.06462 ; support material | |
| G1 X-0.647 Y12.669 E991.09733 ; support material | |
| G1 X0.911 Y10.146 E991.13933 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E991.15117 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E991.26277 ; support material | |
| G1 X-5.270 Y8.545 E991.27344 ; support material | |
| G1 X-21.520 Y8.545 E991.50361 ; support material | |
| G1 X-21.520 Y13.495 E991.57372 ; support material | |
| G1 X21.520 Y13.495 E992.18334 ; support material | |
| G1 X21.520 Y8.545 E992.25345 ; support material | |
| G1 X2.246 Y8.545 E992.52645 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E992.53275 F600.000 ; support material | |
| G1 X3.541 Y10.413 E992.55754 ; support material | |
| G1 X1.233 Y10.345 E992.59025 ; support material | |
| G1 X-0.325 Y12.868 E992.63225 ; support material | |
| G1 X-0.191 Y13.116 E992.63625 ; support material | |
| G1 X4.668 Y13.116 E992.70506 ; support material | |
| G1 X4.959 Y12.645 E992.71291 ; support material | |
| G1 X3.863 Y10.612 E992.74562 ; support material | |
| G1 X4.906 Y8.924 E992.77373 ; support material | |
| G1 F2100.000 E987.77373 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X10.730 Y4.545 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E992.77373 F2100.000 ; compensate retraction | |
| G1 X10.730 Y3.595 E992.78718 F600.000 ; support material | |
| G1 X9.236 Y3.595 E992.80834 ; support material | |
| G1 X8.779 Y4.545 E992.82327 ; support material | |
| G1 X10.730 Y4.545 E992.85091 ; support material | |
| G1 F2100.000 E987.85091 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E992.85091 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E992.91450 F600.000 ; support material | |
| G1 X9.147 Y10.389 E992.93807 ; support material | |
| G1 X7.589 Y12.912 E992.98007 ; support material | |
| G1 X5.281 Y12.844 E993.01278 ; support material | |
| G1 X5.112 Y13.116 E993.01732 ; support material | |
| G1 X7.914 Y13.116 E993.05700 ; support material | |
| G1 X9.469 Y10.588 E993.09904 ; support material | |
| G1 X11.777 Y10.656 E993.13176 ; support material | |
| G1 X12.847 Y8.924 E993.16059 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E993.20550 F600.000 ; support material | |
| G1 X12.099 Y10.855 E993.23765 ; support material | |
| G1 X13.195 Y12.888 E993.27036 ; support material | |
| G1 X13.054 Y13.116 E993.27416 ; support material | |
| G1 X13.498 Y13.116 E993.28047 ; support material | |
| G1 X13.517 Y13.087 E993.28096 ; support material | |
| G1 X14.519 Y13.116 E993.29516 ; support material | |
| G1 X15.849 Y13.116 E993.31400 ; support material | |
| G1 X17.383 Y10.632 E993.35535 ; support material | |
| G1 X16.462 Y8.924 E993.38284 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E993.39305 F600.000 ; support material | |
| G1 X20.013 Y10.899 E993.42347 ; support material | |
| G1 X17.705 Y10.831 E993.45618 ; support material | |
| G1 X16.294 Y13.116 E993.49422 ; support material | |
| G1 X21.141 Y13.116 E993.56289 ; support material | |
| G1 X21.141 Y12.595 E993.57028 ; support material | |
| G1 X20.335 Y11.098 E993.59436 ; support material | |
| G1 X21.141 Y9.792 E993.61610 ; support material | |
| G1 F2100.000 E988.61610 ; retract | |
| G1 Z9.300 F7800.000 ; lift plate during travel | |
| G1 X20.730 Y4.545 F7800.000 ; move to first support material point | |
| G1 Z9.100 F7800.000 ; restore layer Z | |
| G1 E993.61610 F2100.000 ; compensate retraction | |
| G1 X20.730 Y2.295 E993.64797 F600.000 ; support material | |
| G1 X20.620 Y2.295 E993.64953 ; support material | |
| G1 X20.620 Y3.595 E993.66794 ; support material | |
| G1 X18.330 Y3.595 E993.70038 ; support material | |
| G1 X18.330 Y4.545 E993.71383 ; support material | |
| G1 X20.730 Y4.545 E993.74782 ; support material | |
| G1 X20.351 Y4.166 F7800.000 ; move to first support material point | |
| G1 X20.351 Y3.974 E993.75056 F600.000 ; support material | |
| G1 X18.709 Y3.974 E993.77383 ; support material | |
| G1 X18.709 Y4.166 E993.77656 ; support material | |
| G1 X20.351 Y4.166 E993.79983 ; support material | |
| M126 ; enable fan | |
| M73 P48 ; update progress | |
| G1 F2100.000 E988.79983 ; retract | |
| G1 Z9.400 F7800.000 ; move to next layer (89) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z9.200 F7800.000 ; restore layer Z | |
| G1 E993.79983 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E994.58713 F2079.464 ; perimeter | |
| G1 X-18.184 Y-0.169 E994.61589 ; perimeter | |
| G1 X18.184 Y-0.169 E995.40319 ; perimeter | |
| G1 X18.184 Y1.099 E995.43065 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E996.24300 F2079.464 ; perimeter | |
| G1 X-18.763 Y-0.748 E996.29681 ; perimeter | |
| G1 X18.763 Y-0.748 E997.10916 ; perimeter | |
| G1 X18.763 Y1.678 E997.16167 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E997.99906 F2079.464 ; perimeter | |
| G1 X-19.341 Y-1.326 E998.07792 ; perimeter | |
| G1 X19.341 Y-1.326 E998.91531 ; perimeter | |
| G1 X19.341 Y2.256 E998.99288 ; perimeter | |
| G1 X9.528 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E999.13865 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E999.20381 ; perimeter | |
| G1 X-19.820 Y2.795 E999.76527 ; perimeter | |
| G1 X-19.820 Y-1.805 E999.83043 ; perimeter | |
| G1 X4.432 Y-1.805 E1000.17394 ; perimeter | |
| G1 X4.432 Y-11.795 E1000.31543 ; perimeter | |
| G1 X4.980 Y-11.795 E1000.32320 ; perimeter | |
| G1 X4.980 Y-1.805 E1000.46469 ; perimeter | |
| G1 X8.980 Y-1.805 E1000.52135 ; perimeter | |
| G1 X8.980 Y-11.795 E1000.66285 ; perimeter | |
| G1 X9.528 Y-11.795 E1000.67061 ; perimeter | |
| G1 X9.528 Y-1.865 E1000.81126 ; perimeter | |
| G1 X9.528 Y-1.405 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1001.98779 F600.000 ; fill | |
| M73 P48 ; update progress | |
| G1 F2100.000 E996.98779 ; retract | |
| G1 Z9.500 F7800.000 ; move to next layer (90) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.300 F7800.000 ; restore layer Z | |
| G1 E1001.98779 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1002.77508 F2079.464 ; perimeter | |
| G1 X18.184 Y1.159 E1002.80385 ; perimeter | |
| G1 X-18.184 Y1.159 E1003.59115 ; perimeter | |
| G1 X-18.184 Y-0.109 E1003.61861 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1004.43096 F2079.464 ; perimeter | |
| G1 X18.763 Y1.738 E1004.48477 ; perimeter | |
| G1 X-18.763 Y1.738 E1005.29711 ; perimeter | |
| G1 X-18.763 Y-0.688 E1005.34963 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1006.18702 F2079.464 ; perimeter | |
| G1 X19.341 Y2.316 E1006.26588 ; perimeter | |
| G1 X-19.341 Y2.316 E1007.10327 ; perimeter | |
| G1 X-19.341 Y-1.266 E1007.18083 ; perimeter | |
| G1 X4.570 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X4.570 Y-11.795 E1007.32233 F600.000 ; perimeter | |
| G1 X4.980 Y-11.795 E1007.32814 ; perimeter | |
| G1 X4.980 Y-1.805 E1007.46964 ; perimeter | |
| G1 X8.980 Y-1.805 E1007.52630 ; perimeter | |
| G1 X8.980 Y-11.795 E1007.66780 ; perimeter | |
| G1 X9.390 Y-11.795 E1007.67361 ; perimeter | |
| G1 X9.390 Y-1.805 E1007.81511 ; perimeter | |
| G1 X19.820 Y-1.805 E1007.96284 ; perimeter | |
| G1 X19.820 Y2.795 E1008.02799 ; perimeter | |
| G1 X-19.820 Y2.795 E1008.58945 ; perimeter | |
| G1 X-19.820 Y-1.805 E1008.65461 ; perimeter | |
| G1 X4.510 Y-1.805 E1008.99922 ; perimeter | |
| G1 X4.970 Y-1.805 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1010.17575 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P49 ; update progress | |
| G1 F2100.000 E1005.17575 ; retract | |
| G1 Z9.600 F7800.000 ; move to next layer (91) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1010.17575 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1010.96304 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1010.99181 ; perimeter | |
| G1 X-18.184 Y1.159 E1011.77910 ; perimeter | |
| G1 X-18.184 Y-0.109 E1011.80657 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1012.61891 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1012.67273 ; perimeter | |
| G1 X-18.763 Y1.738 E1013.48507 ; perimeter | |
| G1 X-18.763 Y-0.688 E1013.53758 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1014.37498 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1014.45384 ; perimeter | |
| G1 X-19.341 Y2.316 E1015.29123 ; perimeter | |
| G1 X-19.341 Y-1.266 E1015.36879 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1015.93026 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1015.99541 ; perimeter | |
| G1 X-19.820 Y2.795 E1016.55687 ; perimeter | |
| G1 X-19.820 Y-1.745 E1016.62118 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X9.108 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 X9.108 Y-11.995 E1016.83744 F1200.000 ; perimeter | |
| G1 F2100.000 E1011.83744 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X4.852 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1016.83744 F2100.000 ; compensate retraction | |
| G1 X4.852 Y-11.995 E1017.05370 F1200.000 ; perimeter | |
| G1 F2100.000 E1012.05370 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1017.05370 F2100.000 ; compensate retraction | |
| G1 X-17.895 Y0.495 E1018.23023 F600.000 ; fill | |
| M73 P49 ; update progress | |
| G1 F2100.000 E1013.23023 ; retract | |
| G1 Z9.600 F7800.000 ; move to next layer (31) and lift | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1018.23023 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1018.23653 F600.000 ; support material | |
| G1 X-20.679 Y4.366 E1018.24307 ; support material | |
| G1 X-20.234 Y4.366 E1018.24937 ; support material | |
| G1 X-19.991 Y3.974 E1018.25591 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1018.27432 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1018.28707 ; support material | |
| G1 X-21.520 Y4.745 E1018.32177 ; support material | |
| G1 X-19.070 Y4.745 E1018.35647 ; support material | |
| G1 X-19.070 Y3.595 E1018.37276 ; support material | |
| G1 X-20.620 Y3.595 E1018.39472 ; support material | |
| G1 F2100.000 E1013.39472 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1018.39472 F2100.000 ; compensate retraction | |
| G1 X-20.697 Y8.924 E1018.40670 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1018.41300 ; support material | |
| G1 X-21.141 Y9.644 E1018.42320 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1018.43505 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1018.49588 ; support material | |
| G1 X-20.844 Y9.883 E1018.51185 ; support material | |
| G1 X-19.749 Y11.916 E1018.54456 ; support material | |
| G1 X-20.490 Y13.116 E1018.56454 ; support material | |
| G1 X-20.045 Y13.116 E1018.57084 ; support material | |
| G1 X-19.427 Y12.115 E1018.58751 ; support material | |
| G1 X-17.119 Y12.183 E1018.62022 ; support material | |
| G1 X-15.561 Y9.660 E1018.66222 ; support material | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 X-11.866 Y8.924 E1018.68223 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1018.68853 ; support material | |
| G1 X-12.930 Y9.927 E1018.70524 ; support material | |
| G1 X-15.239 Y9.859 E1018.73795 ; support material | |
| G1 X-16.796 Y12.382 E1018.77994 ; support material | |
| G1 X-16.401 Y13.116 E1018.79176 ; support material | |
| G1 X-12.104 Y13.116 E1018.85262 ; support material | |
| G1 X-11.513 Y12.159 E1018.86856 ; support material | |
| G1 X-12.608 Y10.126 E1018.90127 ; support material | |
| G1 F2100.000 E1013.90127 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X-9.070 Y4.745 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1018.90127 F2100.000 ; compensate retraction | |
| G1 X-9.070 Y3.595 E1018.91756 F600.000 ; support material | |
| G1 X-11.870 Y3.595 E1018.95721 ; support material | |
| G1 X-11.870 Y4.745 E1018.97350 ; support material | |
| G1 X-9.070 Y4.745 E1019.01316 ; support material | |
| G1 X-9.449 Y4.366 F7800.000 ; move to first support material point | |
| G1 X-9.449 Y3.974 E1019.01873 F600.000 ; support material | |
| G1 X-11.491 Y3.974 E1019.04766 ; support material | |
| G1 X-11.491 Y4.366 E1019.05323 ; support material | |
| G1 X-9.449 Y4.366 E1019.08217 ; support material | |
| G1 F2100.000 E1014.08217 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1019.08217 F2100.000 ; compensate retraction | |
| G1 X-3.460 Y8.170 E1019.11546 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1019.13573 ; support material | |
| G1 X-4.891 Y8.924 E1019.14640 ; support material | |
| G1 X-7.853 Y8.924 E1019.18835 ; support material | |
| G1 X-7.325 Y9.903 E1019.20411 ; support material | |
| G1 X-8.883 Y12.426 E1019.24610 ; support material | |
| G1 X-11.191 Y12.358 E1019.27881 ; support material | |
| G1 X-11.659 Y13.116 E1019.29144 ; support material | |
| G1 X-8.296 Y13.116 E1019.33908 ; support material | |
| G1 X-8.561 Y12.625 E1019.34699 ; support material | |
| G1 X-7.003 Y10.102 E1019.38899 ; support material | |
| G1 X-4.695 Y10.170 E1019.42170 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1019.45349 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1019.49402 ; support material | |
| G1 X-4.372 Y10.369 E1019.53062 ; support material | |
| G1 X-3.277 Y12.402 E1019.56333 ; support material | |
| G1 X-3.718 Y13.116 E1019.57522 ; support material | |
| G1 X-3.273 Y13.116 E1019.58152 ; support material | |
| G1 X-2.955 Y12.601 E1019.59010 ; support material | |
| G1 X-0.647 Y12.669 E1019.62281 ; support material | |
| G1 X0.911 Y10.146 E1019.66481 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1019.67666 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1019.78826 ; support material | |
| G1 X-5.270 Y8.545 E1019.79893 ; support material | |
| G1 X-21.520 Y8.545 E1020.02909 ; support material | |
| G1 X-21.520 Y13.495 E1020.09920 ; support material | |
| G1 X21.520 Y13.495 E1020.70883 ; support material | |
| G1 X21.520 Y8.545 E1020.77894 ; support material | |
| G1 X2.246 Y8.545 E1021.05193 ; support material | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 X4.461 Y8.924 E1021.05824 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1021.08303 ; support material | |
| G1 X1.233 Y10.345 E1021.11574 ; support material | |
| G1 X-0.325 Y12.868 E1021.15774 ; support material | |
| G1 X-0.191 Y13.116 E1021.16174 ; support material | |
| G1 X4.668 Y13.116 E1021.23055 ; support material | |
| G1 X4.959 Y12.645 E1021.23840 ; support material | |
| G1 X3.863 Y10.612 E1021.27111 ; support material | |
| G1 X4.906 Y8.924 E1021.29921 ; support material | |
| G1 F2100.000 E1016.29921 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X10.930 Y4.745 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1021.29921 F2100.000 ; compensate retraction | |
| G1 X10.930 Y3.595 E1021.31550 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1021.33949 ; support material | |
| G1 X8.683 Y4.745 E1021.35757 ; support material | |
| G1 X10.930 Y4.745 E1021.38940 ; support material | |
| G1 F2100.000 E1016.38940 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1021.38940 F2100.000 ; compensate retraction | |
| G1 X8.357 Y8.924 E1021.45299 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1021.47657 ; support material | |
| G1 X7.589 Y12.912 E1021.51856 ; support material | |
| G1 X5.281 Y12.844 E1021.55127 ; support material | |
| G1 X5.112 Y13.116 E1021.55581 ; support material | |
| G1 X7.914 Y13.116 E1021.59549 ; support material | |
| G1 X9.469 Y10.588 E1021.63754 ; support material | |
| G1 X11.777 Y10.656 E1021.67025 ; support material | |
| G1 X12.847 Y8.924 E1021.69909 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1021.74400 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1021.77614 ; support material | |
| G1 X13.195 Y12.888 E1021.80885 ; support material | |
| G1 X13.054 Y13.116 E1021.81266 ; support material | |
| G1 X13.498 Y13.116 E1021.81896 ; support material | |
| G1 X13.517 Y13.087 E1021.81945 ; support material | |
| G1 X14.519 Y13.116 E1021.83366 ; support material | |
| G1 X15.849 Y13.116 E1021.85249 ; support material | |
| G1 X17.383 Y10.632 E1021.89385 ; support material | |
| G1 X16.462 Y8.924 E1021.92133 ; support material | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 X21.141 Y9.071 E1021.93154 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1021.96196 ; support material | |
| G1 X17.705 Y10.831 E1021.99467 ; support material | |
| G1 X16.294 Y13.116 E1022.03272 ; support material | |
| G1 X21.141 Y13.116 E1022.10138 ; support material | |
| G1 X21.141 Y12.595 E1022.10877 ; support material | |
| G1 X20.335 Y11.098 E1022.13285 ; support material | |
| G1 X21.141 Y9.792 E1022.15459 ; support material | |
| G1 F2100.000 E1017.15459 ; retract | |
| G1 Z9.600 F7800.000 ; lift plate during travel | |
| G1 X20.930 Y4.745 F7800.000 ; move to first support material point | |
| G1 Z9.400 F7800.000 ; restore layer Z | |
| G1 E1022.15459 F2100.000 ; compensate retraction | |
| G1 X20.930 Y2.295 E1022.18929 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1022.19368 ; support material | |
| G1 X20.620 Y3.595 E1022.21210 ; support material | |
| G1 X18.130 Y3.595 E1022.24737 ; support material | |
| G1 X18.130 Y4.745 E1022.26365 ; support material | |
| G1 X20.930 Y4.745 E1022.30331 ; support material | |
| G1 X20.551 Y4.366 F7800.000 ; move to first support material point | |
| G1 X20.551 Y3.974 E1022.30888 F600.000 ; support material | |
| G1 X18.509 Y3.974 E1022.33782 ; support material | |
| G1 X18.509 Y4.366 E1022.34338 ; support material | |
| G1 X20.551 Y4.366 E1022.37232 ; support material | |
| M126 ; enable fan | |
| M73 P49 ; update progress | |
| G1 F2100.000 E1017.37232 ; retract | |
| G1 Z9.700 F7800.000 ; move to next layer (92) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z9.500 F7800.000 ; restore layer Z | |
| G1 E1022.37232 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E1023.15961 F1919.624 ; perimeter | |
| G1 X-18.184 Y-0.169 E1023.18838 ; perimeter | |
| G1 X18.184 Y-0.169 E1023.97567 ; perimeter | |
| G1 X18.184 Y1.099 E1024.00314 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E1024.81548 F1919.624 ; perimeter | |
| G1 X-18.763 Y-0.748 E1024.86930 ; perimeter | |
| G1 X18.763 Y-0.748 E1025.68164 ; perimeter | |
| G1 X18.763 Y1.678 E1025.73416 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E1026.57155 F1919.624 ; perimeter | |
| G1 X-19.341 Y-1.326 E1026.65041 ; perimeter | |
| G1 X19.341 Y-1.326 E1027.48780 ; perimeter | |
| G1 X19.341 Y2.256 E1027.56536 ; perimeter | |
| G1 X19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E1028.12683 F600.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E1028.19198 ; perimeter | |
| G1 X19.820 Y-1.805 E1028.75344 ; perimeter | |
| G1 X19.820 Y2.735 E1028.81775 ; perimeter | |
| G1 X19.474 Y2.595 F7800.000 ; move inwards before travel | |
| G1 X8.995 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 X8.995 Y-11.995 E1029.03401 F600.000 ; perimeter | |
| G1 F2100.000 E1024.03401 ; retract | |
| G1 Z9.700 F7800.000 ; lift plate during travel | |
| G1 X4.965 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 Z9.500 F7800.000 ; restore layer Z | |
| G1 E1029.03401 F2100.000 ; compensate retraction | |
| G1 X4.965 Y-11.995 E1029.25027 F600.000 ; perimeter | |
| G1 F2100.000 E1024.25027 ; retract | |
| G1 Z9.700 F7800.000 ; lift plate during travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z9.500 F7800.000 ; restore layer Z | |
| G1 E1029.25027 F2100.000 ; compensate retraction | |
| G1 X-17.895 Y0.495 E1030.42680 F600.000 ; fill | |
| M73 P50 ; update progress | |
| G1 F2100.000 E1025.42680 ; retract | |
| G1 Z9.800 F7800.000 ; move to next layer (93) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.600 F7800.000 ; restore layer Z | |
| G1 E1030.42680 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1031.21409 F1919.624 ; perimeter | |
| G1 X18.184 Y1.159 E1031.24286 ; perimeter | |
| G1 X-18.184 Y1.159 E1032.03015 ; perimeter | |
| G1 X-18.184 Y-0.109 E1032.05762 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1032.86996 F1919.624 ; perimeter | |
| G1 X18.763 Y1.738 E1032.92378 ; perimeter | |
| G1 X-18.763 Y1.738 E1033.73612 ; perimeter | |
| G1 X-18.763 Y-0.688 E1033.78864 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1034.62603 F1919.624 ; perimeter | |
| G1 X19.341 Y2.316 E1034.70489 ; perimeter | |
| G1 X-19.341 Y2.316 E1035.54228 ; perimeter | |
| G1 X-19.341 Y-1.266 E1035.61984 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1036.18131 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E1036.24646 ; perimeter | |
| G1 X-19.820 Y2.795 E1036.80792 ; perimeter | |
| G1 X-19.820 Y-1.745 E1036.87223 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X8.883 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 X8.883 Y-11.995 E1037.08849 F600.000 ; perimeter | |
| G1 F2100.000 E1032.08849 ; retract | |
| G1 Z9.800 F7800.000 ; lift plate during travel | |
| G1 X5.077 Y-2.005 F7800.000 ; move to first perimeter point | |
| G1 Z9.600 F7800.000 ; restore layer Z | |
| G1 E1037.08849 F2100.000 ; compensate retraction | |
| G1 X5.077 Y-11.995 E1037.30475 F600.000 ; perimeter | |
| G1 F2100.000 E1032.30475 ; retract | |
| G1 Z9.800 F7800.000 ; lift plate during travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 Z9.600 F7800.000 ; restore layer Z | |
| G1 E1037.30475 F2100.000 ; compensate retraction | |
| G1 X-17.895 Y0.495 E1038.48128 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P50 ; update progress | |
| G1 F2100.000 E1033.48128 ; retract | |
| G1 Z9.900 F7800.000 ; move to next layer (94) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1038.48128 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1039.26857 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1039.29734 ; perimeter | |
| G1 X-18.184 Y1.159 E1040.08463 ; perimeter | |
| G1 X-18.184 Y-0.109 E1040.11210 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1040.92444 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1040.97826 ; perimeter | |
| G1 X-18.763 Y1.738 E1041.79060 ; perimeter | |
| G1 X-18.763 Y-0.688 E1041.84312 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1042.68051 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1042.75937 ; perimeter | |
| G1 X-19.341 Y2.316 E1043.59676 ; perimeter | |
| G1 X-19.341 Y-1.266 E1043.67432 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1044.23579 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1044.30094 ; perimeter | |
| G1 X-19.820 Y2.795 E1044.86240 ; perimeter | |
| G1 X-19.820 Y-1.745 E1044.92671 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1046.10324 F600.000 ; fill | |
| M73 P51 ; update progress | |
| G1 F2100.000 E1041.10324 ; retract | |
| G1 Z9.900 F7800.000 ; move to next layer (32) and lift | |
| G1 X20.751 Y4.566 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1046.10324 F2100.000 ; compensate retraction | |
| G1 X20.751 Y3.974 E1046.11164 F600.000 ; support material | |
| G1 X18.309 Y3.974 E1046.14624 ; support material | |
| G1 X18.309 Y4.566 E1046.15464 ; support material | |
| G1 X20.751 Y4.566 E1046.18924 ; support material | |
| G1 X21.130 Y4.945 F7800.000 ; move to first support material point | |
| G1 X21.130 Y2.295 E1046.22677 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1046.23400 ; support material | |
| G1 X20.620 Y3.595 E1046.25241 ; support material | |
| G1 X17.930 Y3.595 E1046.29051 ; support material | |
| G1 X17.930 Y4.945 E1046.30963 ; support material | |
| G1 X21.130 Y4.945 E1046.35496 ; support material | |
| G1 F2100.000 E1041.35496 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1046.35496 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1046.36516 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1046.39559 ; support material | |
| G1 X17.705 Y10.831 E1046.42830 ; support material | |
| G1 X16.294 Y13.116 E1046.46634 ; support material | |
| G1 X21.141 Y13.116 E1046.53501 ; support material | |
| G1 X21.141 Y12.595 E1046.54240 ; support material | |
| G1 X20.335 Y11.098 E1046.56648 ; support material | |
| G1 X21.141 Y9.792 E1046.58822 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1046.63313 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1046.66527 ; support material | |
| G1 X13.195 Y12.888 E1046.69798 ; support material | |
| G1 X13.054 Y13.116 E1046.70179 ; support material | |
| G1 X13.498 Y13.116 E1046.70809 ; support material | |
| G1 X13.517 Y13.087 E1046.70858 ; support material | |
| G1 X14.519 Y13.116 E1046.72279 ; support material | |
| G1 X15.849 Y13.116 E1046.74162 ; support material | |
| G1 X17.383 Y10.632 E1046.78298 ; support material | |
| G1 X16.462 Y8.924 E1046.81046 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1046.87405 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1046.89763 ; support material | |
| G1 X7.589 Y12.912 E1046.93963 ; support material | |
| G1 X5.281 Y12.844 E1046.97234 ; support material | |
| G1 X5.112 Y13.116 E1046.97687 ; support material | |
| G1 X7.914 Y13.116 E1047.01656 ; support material | |
| G1 X9.469 Y10.588 E1047.05860 ; support material | |
| G1 X11.777 Y10.656 E1047.09131 ; support material | |
| G1 X12.847 Y8.924 E1047.12015 ; support material | |
| G1 F2100.000 E1042.12015 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X11.130 Y4.945 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1047.12015 F2100.000 ; compensate retraction | |
| G1 X11.130 Y3.595 E1047.13927 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1047.16609 ; support material | |
| G1 X8.586 Y4.945 E1047.18731 ; support material | |
| G1 X11.130 Y4.945 E1047.22334 ; support material | |
| G1 F2100.000 E1042.22334 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1047.22334 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1047.22965 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1047.25444 ; support material | |
| G1 X1.233 Y10.345 E1047.28715 ; support material | |
| G1 X-0.325 Y12.868 E1047.32915 ; support material | |
| G1 X-0.191 Y13.116 E1047.33315 ; support material | |
| G1 X4.668 Y13.116 E1047.40196 ; support material | |
| G1 X4.959 Y12.645 E1047.40981 ; support material | |
| G1 X3.863 Y10.612 E1047.44252 ; support material | |
| G1 X4.906 Y8.924 E1047.47062 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1047.48247 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1047.59407 ; support material | |
| G1 X-5.270 Y8.545 E1047.60474 ; support material | |
| G1 X-21.520 Y8.545 E1047.83490 ; support material | |
| G1 X-21.520 Y13.495 E1047.90501 ; support material | |
| G1 X21.520 Y13.495 E1048.51464 ; support material | |
| G1 X21.520 Y8.545 E1048.58475 ; support material | |
| G1 X2.246 Y8.545 E1048.85774 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1048.88953 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1048.93006 ; support material | |
| G1 X-4.372 Y10.369 E1048.96666 ; support material | |
| G1 X-3.277 Y12.402 E1048.99937 ; support material | |
| G1 X-3.718 Y13.116 E1049.01127 ; support material | |
| G1 X-3.273 Y13.116 E1049.01757 ; support material | |
| G1 X-2.955 Y12.601 E1049.02615 ; support material | |
| G1 X-0.647 Y12.669 E1049.05886 ; support material | |
| G1 X0.911 Y10.146 E1049.10086 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1049.13415 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1049.15442 ; support material | |
| G1 X-4.891 Y8.924 E1049.16510 ; support material | |
| G1 X-7.853 Y8.924 E1049.20704 ; support material | |
| G1 X-7.325 Y9.903 E1049.22280 ; support material | |
| G1 X-8.883 Y12.426 E1049.26479 ; support material | |
| G1 X-11.191 Y12.358 E1049.29751 ; support material | |
| G1 X-11.659 Y13.116 E1049.31013 ; support material | |
| G1 X-8.296 Y13.116 E1049.35777 ; support material | |
| G1 X-8.561 Y12.625 E1049.36568 ; support material | |
| G1 X-7.003 Y10.102 E1049.40768 ; support material | |
| G1 X-4.695 Y10.170 E1049.44039 ; support material | |
| G1 F2100.000 E1044.44039 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X-8.870 Y4.945 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1049.44039 F2100.000 ; compensate retraction | |
| G1 X-8.870 Y3.595 E1049.45951 F600.000 ; support material | |
| G1 X-12.070 Y3.595 E1049.50484 ; support material | |
| G1 X-12.070 Y4.945 E1049.52396 ; support material | |
| G1 X-8.870 Y4.945 E1049.56928 ; support material | |
| G1 X-9.249 Y4.566 F7800.000 ; move to first support material point | |
| G1 X-9.249 Y3.974 E1049.57768 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1049.61106 ; support material | |
| G1 X-11.691 Y4.113 E1049.61338 ; support material | |
| G1 X-11.691 Y4.566 E1049.61981 ; support material | |
| G1 X-9.249 Y4.566 E1049.65441 ; support material | |
| G1 F2100.000 E1044.65441 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1049.65441 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1049.67442 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1049.68073 ; support material | |
| G1 X-12.930 Y9.927 E1049.69743 ; support material | |
| G1 X-15.239 Y9.859 E1049.73014 ; support material | |
| G1 X-16.796 Y12.382 E1049.77214 ; support material | |
| G1 X-16.401 Y13.116 E1049.78395 ; support material | |
| G1 X-12.104 Y13.116 E1049.84481 ; support material | |
| G1 X-11.513 Y12.159 E1049.86075 ; support material | |
| G1 X-12.608 Y10.126 E1049.89346 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1049.90531 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1049.96613 ; support material | |
| G1 X-20.844 Y9.883 E1049.98210 ; support material | |
| G1 X-19.749 Y11.916 E1050.01481 ; support material | |
| G1 X-20.490 Y13.116 E1050.03479 ; support material | |
| G1 X-20.045 Y13.116 E1050.04110 ; support material | |
| G1 X-19.427 Y12.115 E1050.05777 ; support material | |
| G1 X-17.119 Y12.183 E1050.09048 ; support material | |
| G1 X-15.561 Y9.660 E1050.13247 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1050.14446 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1050.15076 ; support material | |
| G1 X-21.141 Y9.644 E1050.16096 ; support material | |
| G1 F2100.000 E1045.16096 ; retract | |
| G1 Z9.900 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z9.700 F7800.000 ; restore layer Z | |
| G1 E1050.16096 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1050.16726 F600.000 ; support material | |
| G1 X-20.802 Y4.566 E1050.17713 ; support material | |
| G1 X-20.357 Y4.566 E1050.18343 ; support material | |
| G1 X-19.991 Y3.974 E1050.19330 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1050.21171 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1050.22446 ; support material | |
| G1 X-21.520 Y4.945 E1050.26200 ; support material | |
| G1 X-18.870 Y4.945 E1050.29953 ; support material | |
| G1 X-18.870 Y3.595 E1050.31865 ; support material | |
| G1 X-20.620 Y3.595 E1050.34344 ; support material | |
| M126 ; enable fan | |
| M73 P51 ; update progress | |
| G1 F2100.000 E1045.34344 ; retract | |
| G1 Z10.000 F7800.000 ; move to next layer (95) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z9.800 F7800.000 ; restore layer Z | |
| G1 E1050.34344 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1050.37221 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1051.15950 ; perimeter | |
| G1 X18.184 Y1.159 E1051.18827 ; perimeter | |
| G1 X-18.124 Y1.159 E1051.97426 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1052.02808 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1052.84042 ; perimeter | |
| G1 X18.763 Y1.738 E1052.89423 ; perimeter | |
| G1 X-18.703 Y1.738 E1053.70528 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1053.78414 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1054.62153 ; perimeter | |
| G1 X19.341 Y2.316 E1054.70039 ; perimeter | |
| G1 X-19.281 Y2.316 E1055.53649 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1055.60164 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1056.16310 ; perimeter | |
| G1 X19.820 Y2.795 E1056.22826 ; perimeter | |
| G1 X-19.760 Y2.795 E1056.78887 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1057.96540 F600.000 ; fill | |
| M73 P51 ; update progress | |
| G1 F2100.000 E1052.96540 ; retract | |
| G1 Z10.100 F7800.000 ; move to next layer (96) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z9.900 F7800.000 ; restore layer Z | |
| G1 E1057.96540 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1057.99417 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1058.78146 ; perimeter | |
| G1 X-18.184 Y-0.169 E1058.81023 ; perimeter | |
| G1 X18.124 Y-0.169 E1059.59622 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1059.65004 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1060.46238 ; perimeter | |
| G1 X-18.763 Y-0.748 E1060.51619 ; perimeter | |
| G1 X18.703 Y-0.748 E1061.32724 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1061.40610 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1062.24349 ; perimeter | |
| G1 X-19.341 Y-1.326 E1062.32235 ; perimeter | |
| G1 X19.281 Y-1.326 E1063.15845 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1063.22360 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1063.78507 ; perimeter | |
| G1 X-19.820 Y-1.805 E1063.85022 ; perimeter | |
| G1 X19.760 Y-1.805 E1064.41083 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1065.58736 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P52 ; update progress | |
| G1 F2100.000 E1060.58736 ; retract | |
| G1 Z10.200 F7800.000 ; move to next layer (97) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1065.58736 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1066.37466 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1066.40342 ; perimeter | |
| G1 X-18.184 Y1.159 E1067.19072 ; perimeter | |
| G1 X-18.184 Y-0.109 E1067.21819 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1068.03053 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1068.08434 ; perimeter | |
| G1 X-18.763 Y1.738 E1068.89669 ; perimeter | |
| G1 X-18.763 Y-0.688 E1068.94920 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1069.78659 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1069.86545 ; perimeter | |
| G1 X-19.341 Y2.316 E1070.70285 ; perimeter | |
| G1 X-19.341 Y-1.266 E1070.78041 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1071.34187 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1071.40703 ; perimeter | |
| G1 X-19.820 Y2.795 E1071.96849 ; perimeter | |
| G1 X-19.820 Y-1.745 E1072.03280 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1073.20932 F600.000 ; fill | |
| M73 P52 ; update progress | |
| G1 F2100.000 E1068.20932 ; retract | |
| G1 Z10.200 F7800.000 ; move to next layer (33) and lift | |
| G1 X20.951 Y4.766 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1073.20932 F2100.000 ; compensate retraction | |
| G1 X20.951 Y3.974 E1073.22055 F600.000 ; support material | |
| G1 X18.109 Y3.974 E1073.26082 ; support material | |
| G1 X18.109 Y4.766 E1073.27205 ; support material | |
| G1 X20.951 Y4.766 E1073.31232 ; support material | |
| G1 X21.330 Y5.145 F7800.000 ; move to first support material point | |
| G1 X21.330 Y2.295 E1073.35269 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1073.36274 ; support material | |
| G1 X20.620 Y3.595 E1073.38116 ; support material | |
| G1 X17.730 Y3.595 E1073.42209 ; support material | |
| G1 X17.730 Y5.145 E1073.44405 ; support material | |
| G1 X21.330 Y5.145 E1073.49504 ; support material | |
| G1 F2100.000 E1068.49504 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1073.49504 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1073.50524 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1073.53567 ; support material | |
| G1 X17.705 Y10.831 E1073.56838 ; support material | |
| G1 X16.294 Y13.116 E1073.60642 ; support material | |
| G1 X21.141 Y13.116 E1073.67509 ; support material | |
| G1 X21.141 Y12.595 E1073.68248 ; support material | |
| G1 X20.335 Y11.098 E1073.70656 ; support material | |
| G1 X21.141 Y9.792 E1073.72830 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1073.77321 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1073.80535 ; support material | |
| G1 X13.195 Y12.888 E1073.83806 ; support material | |
| G1 X13.054 Y13.116 E1073.84187 ; support material | |
| G1 X13.498 Y13.116 E1073.84817 ; support material | |
| G1 X13.517 Y13.087 E1073.84866 ; support material | |
| G1 X14.519 Y13.116 E1073.86287 ; support material | |
| G1 X15.849 Y13.116 E1073.88170 ; support material | |
| G1 X17.383 Y10.632 E1073.92306 ; support material | |
| G1 X16.462 Y8.924 E1073.95054 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1074.01413 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1074.03771 ; support material | |
| G1 X7.589 Y12.912 E1074.07971 ; support material | |
| G1 X5.281 Y12.844 E1074.11242 ; support material | |
| G1 X5.112 Y13.116 E1074.11695 ; support material | |
| G1 X7.914 Y13.116 E1074.15664 ; support material | |
| G1 X9.469 Y10.588 E1074.19868 ; support material | |
| G1 X11.777 Y10.656 E1074.23139 ; support material | |
| G1 X12.847 Y8.924 E1074.26023 ; support material | |
| G1 F2100.000 E1069.26023 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X11.330 Y5.145 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1074.26023 F2100.000 ; compensate retraction | |
| G1 X11.330 Y3.595 E1074.28218 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1074.31184 ; support material | |
| G1 X8.490 Y5.145 E1074.33620 ; support material | |
| G1 X11.330 Y5.145 E1074.37643 ; support material | |
| G1 F2100.000 E1069.37643 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1074.37643 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1074.38273 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1074.40753 ; support material | |
| G1 X1.233 Y10.345 E1074.44024 ; support material | |
| G1 X-0.325 Y12.868 E1074.48223 ; support material | |
| G1 X-0.191 Y13.116 E1074.48623 ; support material | |
| G1 X4.668 Y13.116 E1074.55505 ; support material | |
| G1 X4.959 Y12.645 E1074.56289 ; support material | |
| G1 X3.863 Y10.612 E1074.59560 ; support material | |
| G1 X4.906 Y8.924 E1074.62371 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1074.63555 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1074.74715 ; support material | |
| G1 X-5.270 Y8.545 E1074.75782 ; support material | |
| G1 X-21.520 Y8.545 E1074.98799 ; support material | |
| G1 X-21.520 Y13.495 E1075.05810 ; support material | |
| G1 X21.520 Y13.495 E1075.66772 ; support material | |
| G1 X21.520 Y8.545 E1075.73784 ; support material | |
| G1 X2.246 Y8.545 E1076.01083 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1076.04262 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1076.08315 ; support material | |
| G1 X-4.372 Y10.369 E1076.11975 ; support material | |
| G1 X-3.277 Y12.402 E1076.15246 ; support material | |
| G1 X-3.718 Y13.116 E1076.16435 ; support material | |
| G1 X-3.273 Y13.116 E1076.17065 ; support material | |
| G1 X-2.955 Y12.601 E1076.17924 ; support material | |
| G1 X-0.647 Y12.669 E1076.21195 ; support material | |
| G1 X0.911 Y10.146 E1076.25394 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1076.28723 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1076.30751 ; support material | |
| G1 X-4.891 Y8.924 E1076.31818 ; support material | |
| G1 X-7.853 Y8.924 E1076.36013 ; support material | |
| G1 X-7.325 Y9.903 E1076.37588 ; support material | |
| G1 X-8.883 Y12.426 E1076.41788 ; support material | |
| G1 X-11.191 Y12.358 E1076.45059 ; support material | |
| G1 X-11.659 Y13.116 E1076.46322 ; support material | |
| G1 X-8.296 Y13.116 E1076.51086 ; support material | |
| G1 X-8.561 Y12.625 E1076.51877 ; support material | |
| G1 X-7.003 Y10.102 E1076.56077 ; support material | |
| G1 X-4.695 Y10.170 E1076.59348 ; support material | |
| G1 F2100.000 E1071.59348 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X-8.670 Y5.145 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1076.59348 F2100.000 ; compensate retraction | |
| G1 X-8.670 Y3.595 E1076.61543 F600.000 ; support material | |
| G1 X-12.270 Y3.595 E1076.66642 ; support material | |
| G1 X-12.270 Y5.145 E1076.68838 ; support material | |
| G1 X-8.670 Y5.145 E1076.73937 ; support material | |
| G1 X-9.049 Y4.766 F7800.000 ; move to first support material point | |
| G1 X-9.049 Y3.974 E1076.75060 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1076.78681 ; support material | |
| G1 X-11.891 Y4.437 E1076.79453 ; support material | |
| G1 X-11.891 Y4.766 E1076.79919 ; support material | |
| G1 X-9.049 Y4.766 E1076.83946 ; support material | |
| G1 F2100.000 E1071.83946 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1076.83946 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1076.85948 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1076.86578 ; support material | |
| G1 X-12.930 Y9.927 E1076.88248 ; support material | |
| G1 X-15.239 Y9.859 E1076.91519 ; support material | |
| G1 X-16.796 Y12.382 E1076.95719 ; support material | |
| G1 X-16.401 Y13.116 E1076.96901 ; support material | |
| G1 X-12.104 Y13.116 E1077.02986 ; support material | |
| G1 X-11.513 Y12.159 E1077.04580 ; support material | |
| G1 X-12.608 Y10.126 E1077.07851 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1077.09036 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1077.15118 ; support material | |
| G1 X-20.844 Y9.883 E1077.16715 ; support material | |
| G1 X-19.749 Y11.916 E1077.19986 ; support material | |
| G1 X-20.490 Y13.116 E1077.21985 ; support material | |
| G1 X-20.045 Y13.116 E1077.22615 ; support material | |
| G1 X-19.427 Y12.115 E1077.24282 ; support material | |
| G1 X-17.119 Y12.183 E1077.27553 ; support material | |
| G1 X-15.561 Y9.660 E1077.31753 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1077.32951 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1077.33581 ; support material | |
| G1 X-21.141 Y9.644 E1077.34601 ; support material | |
| G1 F2100.000 E1072.34601 ; retract | |
| G1 Z10.200 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z10.000 F7800.000 ; restore layer Z | |
| G1 E1077.34601 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1077.35231 F600.000 ; support material | |
| G1 X-20.926 Y4.766 E1077.36551 ; support material | |
| G1 X-20.481 Y4.766 E1077.37181 ; support material | |
| G1 X-19.991 Y3.974 E1077.38501 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1077.40343 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1077.41617 ; support material | |
| G1 X-21.520 Y5.145 E1077.45654 ; support material | |
| G1 X-18.670 Y5.145 E1077.49691 ; support material | |
| G1 X-18.670 Y3.595 E1077.51886 ; support material | |
| G1 X-20.620 Y3.595 E1077.54648 ; support material | |
| M126 ; enable fan | |
| M73 P53 ; update progress | |
| G1 F2100.000 E1072.54648 ; retract | |
| G1 Z10.300 F7800.000 ; move to next layer (98) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z10.100 F7800.000 ; restore layer Z | |
| G1 E1077.54648 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1077.57525 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1078.36254 ; perimeter | |
| G1 X18.184 Y1.159 E1078.39131 ; perimeter | |
| G1 X-18.124 Y1.159 E1079.17731 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1079.23112 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1080.04346 ; perimeter | |
| G1 X18.763 Y1.738 E1080.09727 ; perimeter | |
| G1 X-18.703 Y1.738 E1080.90832 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1080.98718 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1081.82457 ; perimeter | |
| G1 X19.341 Y2.316 E1081.90343 ; perimeter | |
| G1 X-19.281 Y2.316 E1082.73953 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1082.80468 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1083.36615 ; perimeter | |
| G1 X19.820 Y2.795 E1083.43130 ; perimeter | |
| G1 X-19.760 Y2.795 E1083.99191 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1085.16844 F600.000 ; fill | |
| M73 P53 ; update progress | |
| G1 F2100.000 E1080.16844 ; retract | |
| G1 Z10.400 F7800.000 ; move to next layer (99) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.200 F7800.000 ; restore layer Z | |
| G1 E1085.16844 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1085.19721 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1085.98450 ; perimeter | |
| G1 X-18.184 Y-0.169 E1086.01327 ; perimeter | |
| G1 X18.124 Y-0.169 E1086.79927 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1086.85308 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1087.66542 ; perimeter | |
| G1 X-18.763 Y-0.748 E1087.71924 ; perimeter | |
| G1 X18.703 Y-0.748 E1088.53028 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1088.60914 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1089.44653 ; perimeter | |
| G1 X-19.341 Y-1.326 E1089.52540 ; perimeter | |
| G1 X19.281 Y-1.326 E1090.36149 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1090.42664 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1090.98811 ; perimeter | |
| G1 X-19.820 Y-1.805 E1091.05326 ; perimeter | |
| G1 X19.760 Y-1.805 E1091.61388 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1092.79040 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P53 ; update progress | |
| G1 F2100.000 E1087.79040 ; retract | |
| G1 Z10.500 F7800.000 ; move to next layer (100) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1092.79040 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1093.57770 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1093.60647 ; perimeter | |
| G1 X-18.184 Y1.159 E1094.39376 ; perimeter | |
| G1 X-18.184 Y-0.109 E1094.42123 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1095.23357 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1095.28738 ; perimeter | |
| G1 X-18.763 Y1.738 E1096.09973 ; perimeter | |
| G1 X-18.763 Y-0.688 E1096.15224 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1096.98964 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1097.06850 ; perimeter | |
| G1 X-19.341 Y2.316 E1097.90589 ; perimeter | |
| G1 X-19.341 Y-1.266 E1097.98345 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1098.54491 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1098.61007 ; perimeter | |
| G1 X-19.820 Y2.795 E1099.17153 ; perimeter | |
| G1 X-19.820 Y-1.745 E1099.23584 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1100.41237 F600.000 ; fill | |
| M73 P54 ; update progress | |
| G1 F2100.000 E1095.41237 ; retract | |
| G1 Z10.500 F7800.000 ; move to next layer (34) and lift | |
| G1 X21.141 Y4.544 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1100.41237 F2100.000 ; compensate retraction | |
| G1 X21.141 Y2.674 E1100.43885 F600.000 ; support material | |
| G1 X20.999 Y2.674 E1100.44088 ; support material | |
| G1 X20.999 Y3.974 E1100.45929 ; support material | |
| G1 X17.909 Y3.974 E1100.50306 ; support material | |
| G1 X17.909 Y4.966 E1100.51712 ; support material | |
| G1 X20.880 Y4.966 E1100.55921 ; support material | |
| G1 X21.141 Y4.544 E1100.56625 ; support material | |
| G1 X21.520 Y5.345 F7800.000 ; move to first support material point | |
| G1 X21.520 Y2.295 E1100.60945 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1100.62220 ; support material | |
| G1 X20.620 Y3.595 E1100.64062 ; support material | |
| G1 X17.530 Y3.595 E1100.68438 ; support material | |
| G1 X17.530 Y5.345 E1100.70917 ; support material | |
| G1 X21.520 Y5.345 E1100.76568 ; support material | |
| G1 F2100.000 E1095.76568 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1100.76568 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1100.77589 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1100.80631 ; support material | |
| G1 X17.705 Y10.831 E1100.83902 ; support material | |
| G1 X16.294 Y13.116 E1100.87707 ; support material | |
| G1 X21.141 Y13.116 E1100.94573 ; support material | |
| G1 X21.141 Y12.595 E1100.95313 ; support material | |
| G1 X20.335 Y11.098 E1100.97721 ; support material | |
| G1 X21.141 Y9.792 E1100.99894 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1101.04385 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1101.07600 ; support material | |
| G1 X13.195 Y12.888 E1101.10871 ; support material | |
| G1 X13.054 Y13.116 E1101.11251 ; support material | |
| G1 X13.498 Y13.116 E1101.11882 ; support material | |
| G1 X13.517 Y13.087 E1101.11931 ; support material | |
| G1 X14.519 Y13.116 E1101.13351 ; support material | |
| G1 X15.849 Y13.116 E1101.15235 ; support material | |
| G1 X17.383 Y10.632 E1101.19370 ; support material | |
| G1 X16.462 Y8.924 E1101.22119 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1101.28478 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1101.30836 ; support material | |
| G1 X7.589 Y12.912 E1101.35035 ; support material | |
| G1 X5.281 Y12.844 E1101.38306 ; support material | |
| G1 X5.112 Y13.116 E1101.38760 ; support material | |
| G1 X7.914 Y13.116 E1101.42729 ; support material | |
| G1 X9.469 Y10.588 E1101.46933 ; support material | |
| G1 X11.777 Y10.656 E1101.50204 ; support material | |
| G1 X12.847 Y8.924 E1101.53088 ; support material | |
| G1 F2100.000 E1096.53088 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X11.530 Y5.345 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1101.53088 F2100.000 ; compensate retraction | |
| G1 X11.530 Y3.595 E1101.55566 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1101.58815 ; support material | |
| G1 X8.394 Y5.345 E1101.61566 ; support material | |
| G1 X11.530 Y5.345 E1101.66009 ; support material | |
| G1 F2100.000 E1096.66009 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1101.66009 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1101.66639 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1101.69118 ; support material | |
| G1 X1.233 Y10.345 E1101.72389 ; support material | |
| G1 X-0.325 Y12.868 E1101.76589 ; support material | |
| G1 X-0.191 Y13.116 E1101.76989 ; support material | |
| G1 X4.668 Y13.116 E1101.83870 ; support material | |
| G1 X4.959 Y12.645 E1101.84655 ; support material | |
| G1 X3.863 Y10.612 E1101.87926 ; support material | |
| G1 X4.906 Y8.924 E1101.90736 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1101.91921 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1102.03081 ; support material | |
| G1 X-5.270 Y8.545 E1102.04148 ; support material | |
| G1 X-21.520 Y8.545 E1102.27164 ; support material | |
| G1 X-21.520 Y13.495 E1102.34176 ; support material | |
| G1 X21.520 Y13.495 E1102.95138 ; support material | |
| G1 X21.520 Y8.545 E1103.02149 ; support material | |
| G1 X2.246 Y8.545 E1103.29449 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1103.32627 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1103.36681 ; support material | |
| G1 X-4.372 Y10.369 E1103.40341 ; support material | |
| G1 X-3.277 Y12.402 E1103.43612 ; support material | |
| G1 X-3.718 Y13.116 E1103.44801 ; support material | |
| G1 X-3.273 Y13.116 E1103.45431 ; support material | |
| G1 X-2.955 Y12.601 E1103.46289 ; support material | |
| G1 X-0.647 Y12.669 E1103.49560 ; support material | |
| G1 X0.911 Y10.146 E1103.53760 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1103.57089 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1103.59117 ; support material | |
| G1 X-4.891 Y8.924 E1103.60184 ; support material | |
| G1 X-7.853 Y8.924 E1103.64378 ; support material | |
| G1 X-7.325 Y9.903 E1103.65954 ; support material | |
| G1 X-8.883 Y12.426 E1103.70154 ; support material | |
| G1 X-11.191 Y12.358 E1103.73425 ; support material | |
| G1 X-11.659 Y13.116 E1103.74687 ; support material | |
| G1 X-8.296 Y13.116 E1103.79451 ; support material | |
| G1 X-8.561 Y12.625 E1103.80242 ; support material | |
| G1 X-7.003 Y10.102 E1103.84442 ; support material | |
| G1 X-4.695 Y10.170 E1103.87713 ; support material | |
| G1 F2100.000 E1098.87713 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X-8.849 Y4.966 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1103.87713 F2100.000 ; compensate retraction | |
| G1 X-8.849 Y3.974 E1103.89119 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1103.93024 ; support material | |
| G1 X-12.091 Y4.761 E1103.94335 ; support material | |
| G1 X-12.091 Y4.966 E1103.94626 ; support material | |
| G1 X-8.849 Y4.966 E1103.99219 ; support material | |
| G1 X-8.470 Y3.712 F7800.000 ; move to first support material point | |
| G1 X-8.616 Y3.595 E1103.99485 F600.000 ; support material | |
| G1 X-12.470 Y3.595 E1104.04943 ; support material | |
| G1 X-12.470 Y5.345 E1104.07422 ; support material | |
| G1 X-8.470 Y5.345 E1104.13087 ; support material | |
| G1 X-8.470 Y3.712 E1104.15401 ; support material | |
| G1 X-12.091 Y4.040 F7800.000 ; move to first support material point | |
| G1 X-12.050 Y3.974 E1104.15512 F600.000 ; support material | |
| G1 X-12.091 Y3.974 E1104.15570 ; support material | |
| G1 X-12.091 Y4.040 E1104.15664 ; support material | |
| G1 F2100.000 E1099.15664 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1104.15664 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1104.17666 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1104.18296 ; support material | |
| G1 X-12.930 Y9.927 E1104.19966 ; support material | |
| G1 X-15.239 Y9.859 E1104.23237 ; support material | |
| G1 X-16.796 Y12.382 E1104.27437 ; support material | |
| G1 X-16.401 Y13.116 E1104.28619 ; support material | |
| G1 X-12.104 Y13.116 E1104.34705 ; support material | |
| G1 X-11.513 Y12.159 E1104.36298 ; support material | |
| G1 X-12.608 Y10.126 E1104.39569 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1104.40754 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1104.46837 ; support material | |
| G1 X-20.844 Y9.883 E1104.48434 ; support material | |
| G1 X-19.749 Y11.916 E1104.51705 ; support material | |
| G1 X-20.490 Y13.116 E1104.53703 ; support material | |
| G1 X-20.045 Y13.116 E1104.54333 ; support material | |
| G1 X-19.427 Y12.115 E1104.56000 ; support material | |
| G1 X-17.119 Y12.183 E1104.59271 ; support material | |
| G1 X-15.561 Y9.660 E1104.63471 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1104.64670 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1104.65299 ; support material | |
| G1 X-21.141 Y9.644 E1104.66319 ; support material | |
| G1 F2100.000 E1099.66319 ; retract | |
| G1 Z10.500 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z10.300 F7800.000 ; restore layer Z | |
| G1 E1104.66319 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1104.66950 F600.000 ; support material | |
| G1 X-21.026 Y4.929 E1104.68540 ; support material | |
| G1 X-21.141 Y4.926 E1104.68704 ; support material | |
| G1 X-21.141 Y4.966 E1104.68761 ; support material | |
| G1 X-20.604 Y4.966 E1104.69522 ; support material | |
| G1 X-19.991 Y3.974 E1104.71175 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1104.73016 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1104.74291 ; support material | |
| G1 X-21.520 Y5.345 E1104.78611 ; support material | |
| G1 X-18.470 Y5.345 E1104.82931 ; support material | |
| G1 X-18.470 Y3.595 E1104.85410 ; support material | |
| G1 X-20.620 Y3.595 E1104.88455 ; support material | |
| M126 ; enable fan | |
| M73 P54 ; update progress | |
| G1 F2100.000 E1099.88455 ; retract | |
| G1 Z10.600 F7800.000 ; move to next layer (101) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z10.400 F7800.000 ; restore layer Z | |
| G1 E1104.88455 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1104.91332 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1105.70061 ; perimeter | |
| G1 X18.184 Y1.159 E1105.72938 ; perimeter | |
| G1 X-18.124 Y1.159 E1106.51538 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1106.56919 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1107.38153 ; perimeter | |
| G1 X18.763 Y1.738 E1107.43534 ; perimeter | |
| G1 X-18.703 Y1.738 E1108.24639 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1108.32525 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1109.16264 ; perimeter | |
| G1 X19.341 Y2.316 E1109.24150 ; perimeter | |
| G1 X-19.281 Y2.316 E1110.07760 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1110.14275 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1110.70422 ; perimeter | |
| G1 X19.820 Y2.795 E1110.76937 ; perimeter | |
| G1 X-19.760 Y2.795 E1111.32998 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1112.50651 F600.000 ; fill | |
| M73 P55 ; update progress | |
| G1 F2100.000 E1107.50651 ; retract | |
| G1 Z10.700 F7800.000 ; move to next layer (102) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.500 F7800.000 ; restore layer Z | |
| G1 E1112.50651 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1112.53528 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1113.32257 ; perimeter | |
| G1 X-18.184 Y-0.169 E1113.35134 ; perimeter | |
| G1 X18.124 Y-0.169 E1114.13734 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1114.19115 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1115.00349 ; perimeter | |
| G1 X-18.763 Y-0.748 E1115.05731 ; perimeter | |
| G1 X18.703 Y-0.748 E1115.86835 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1115.94721 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1116.78460 ; perimeter | |
| G1 X-19.341 Y-1.326 E1116.86346 ; perimeter | |
| G1 X19.281 Y-1.326 E1117.69956 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1117.76471 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1118.32618 ; perimeter | |
| G1 X-19.820 Y-1.805 E1118.39133 ; perimeter | |
| G1 X19.760 Y-1.805 E1118.95195 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1120.12847 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P55 ; update progress | |
| G1 F2100.000 E1115.12847 ; retract | |
| G1 Z10.800 F7800.000 ; move to next layer (103) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1120.12847 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1120.91577 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1120.94454 ; perimeter | |
| G1 X-18.184 Y1.159 E1121.73183 ; perimeter | |
| G1 X-18.184 Y-0.109 E1121.75930 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1122.57164 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1122.62545 ; perimeter | |
| G1 X-18.763 Y1.738 E1123.43780 ; perimeter | |
| G1 X-18.763 Y-0.688 E1123.49031 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1124.32771 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1124.40657 ; perimeter | |
| G1 X-19.341 Y2.316 E1125.24396 ; perimeter | |
| G1 X-19.341 Y-1.266 E1125.32152 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1125.88298 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1125.94814 ; perimeter | |
| G1 X-19.820 Y2.795 E1126.50960 ; perimeter | |
| G1 X-19.820 Y-1.745 E1126.57391 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1127.75044 F600.000 ; fill | |
| M73 P55 ; update progress | |
| G1 F2100.000 E1122.75044 ; retract | |
| G1 Z10.800 F7800.000 ; move to next layer (35) and lift | |
| G1 X21.141 Y4.544 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1127.75044 F2100.000 ; compensate retraction | |
| G1 X21.141 Y2.674 E1127.77692 F600.000 ; support material | |
| G1 X20.999 Y2.674 E1127.77895 ; support material | |
| G1 X20.999 Y3.974 E1127.79736 ; support material | |
| G1 X17.709 Y3.974 E1127.84396 ; support material | |
| G1 X17.709 Y5.166 E1127.86086 ; support material | |
| G1 X20.757 Y5.166 E1127.90403 ; support material | |
| G1 X21.141 Y4.544 E1127.91440 ; support material | |
| G1 X21.520 Y5.545 F7800.000 ; move to first support material point | |
| G1 X21.520 Y2.295 E1127.96044 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1127.97318 ; support material | |
| G1 X20.620 Y3.595 E1127.99160 ; support material | |
| G1 X17.330 Y3.595 E1128.03820 ; support material | |
| G1 X17.330 Y5.545 E1128.06582 ; support material | |
| G1 X21.520 Y5.545 E1128.12516 ; support material | |
| G1 F2100.000 E1123.12516 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1128.12516 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1128.13537 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1128.16579 ; support material | |
| G1 X17.705 Y10.831 E1128.19850 ; support material | |
| G1 X16.294 Y13.116 E1128.23655 ; support material | |
| G1 X21.141 Y13.116 E1128.30521 ; support material | |
| G1 X21.141 Y12.595 E1128.31261 ; support material | |
| G1 X20.335 Y11.098 E1128.33669 ; support material | |
| G1 X21.141 Y9.792 E1128.35842 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1128.40333 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1128.43548 ; support material | |
| G1 X13.195 Y12.888 E1128.46819 ; support material | |
| G1 X13.054 Y13.116 E1128.47199 ; support material | |
| G1 X13.498 Y13.116 E1128.47830 ; support material | |
| G1 X13.517 Y13.087 E1128.47879 ; support material | |
| G1 X14.519 Y13.116 E1128.49299 ; support material | |
| G1 X15.849 Y13.116 E1128.51183 ; support material | |
| G1 X17.383 Y10.632 E1128.55318 ; support material | |
| G1 X16.462 Y8.924 E1128.58067 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1128.64426 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1128.66784 ; support material | |
| G1 X7.589 Y12.912 E1128.70983 ; support material | |
| G1 X5.281 Y12.844 E1128.74254 ; support material | |
| G1 X5.112 Y13.116 E1128.74708 ; support material | |
| G1 X7.914 Y13.116 E1128.78677 ; support material | |
| G1 X9.469 Y10.588 E1128.82881 ; support material | |
| G1 X11.777 Y10.656 E1128.86152 ; support material | |
| G1 X12.847 Y8.924 E1128.89036 ; support material | |
| G1 F2100.000 E1123.89036 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X11.730 Y5.545 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1128.89036 F2100.000 ; compensate retraction | |
| G1 X11.730 Y3.595 E1128.91798 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1128.95329 ; support material | |
| G1 X8.297 Y5.545 E1128.98395 ; support material | |
| G1 X11.730 Y5.545 E1129.03257 ; support material | |
| G1 X9.035 Y5.166 F7800.000 ; move to first support material point | |
| G1 X8.964 Y5.034 E1129.03471 F600.000 ; support material | |
| G1 X8.900 Y5.166 E1129.03679 ; support material | |
| G1 X9.035 Y5.166 E1129.03871 ; support material | |
| G1 F2100.000 E1124.03871 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1129.03871 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1129.04501 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1129.06980 ; support material | |
| G1 X1.233 Y10.345 E1129.10252 ; support material | |
| G1 X-0.325 Y12.868 E1129.14451 ; support material | |
| G1 X-0.191 Y13.116 E1129.14851 ; support material | |
| G1 X4.668 Y13.116 E1129.21733 ; support material | |
| G1 X4.959 Y12.645 E1129.22517 ; support material | |
| G1 X3.863 Y10.612 E1129.25788 ; support material | |
| G1 X4.906 Y8.924 E1129.28599 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1129.29783 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1129.40943 ; support material | |
| G1 X-5.270 Y8.545 E1129.42010 ; support material | |
| G1 X-21.520 Y8.545 E1129.65027 ; support material | |
| G1 X-21.520 Y13.495 E1129.72038 ; support material | |
| G1 X21.520 Y13.495 E1130.33000 ; support material | |
| G1 X21.520 Y8.545 E1130.40011 ; support material | |
| G1 X2.246 Y8.545 E1130.67311 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1130.70490 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1130.74543 ; support material | |
| G1 X-4.372 Y10.369 E1130.78203 ; support material | |
| G1 X-3.277 Y12.402 E1130.81474 ; support material | |
| G1 X-3.718 Y13.116 E1130.82663 ; support material | |
| G1 X-3.273 Y13.116 E1130.83293 ; support material | |
| G1 X-2.955 Y12.601 E1130.84152 ; support material | |
| G1 X-0.647 Y12.669 E1130.87423 ; support material | |
| G1 X0.911 Y10.146 E1130.91622 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1130.94951 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1130.96979 ; support material | |
| G1 X-4.891 Y8.924 E1130.98046 ; support material | |
| G1 X-7.853 Y8.924 E1131.02240 ; support material | |
| G1 X-7.325 Y9.903 E1131.03816 ; support material | |
| G1 X-8.883 Y12.426 E1131.08016 ; support material | |
| G1 X-11.191 Y12.358 E1131.11287 ; support material | |
| G1 X-11.659 Y13.116 E1131.12550 ; support material | |
| G1 X-8.296 Y13.116 E1131.17314 ; support material | |
| G1 X-8.561 Y12.625 E1131.18105 ; support material | |
| G1 X-7.003 Y10.102 E1131.22305 ; support material | |
| G1 X-4.695 Y10.170 E1131.25576 ; support material | |
| G1 F2100.000 E1126.25576 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X-8.270 Y3.871 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1131.25576 F2100.000 ; compensate retraction | |
| G1 X-8.616 Y3.595 E1131.26203 F600.000 ; support material | |
| G1 X-12.670 Y3.595 E1131.31945 ; support material | |
| G1 X-12.670 Y5.545 E1131.34707 ; support material | |
| G1 X-8.270 Y5.545 E1131.40939 ; support material | |
| G1 X-8.270 Y3.871 E1131.43310 ; support material | |
| G1 X-8.649 Y4.054 F7800.000 ; move to first support material point | |
| G1 X-8.749 Y3.974 E1131.43491 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1131.47537 ; support material | |
| G1 X-12.291 Y5.085 E1131.49387 ; support material | |
| G1 X-12.291 Y5.166 E1131.49503 ; support material | |
| G1 X-8.649 Y5.166 E1131.54663 ; support material | |
| G1 X-8.649 Y4.054 E1131.56239 ; support material | |
| G1 X-12.291 Y4.364 F7800.000 ; move to first support material point | |
| G1 X-12.050 Y3.974 E1131.56889 F600.000 ; support material | |
| G1 X-12.291 Y3.974 E1131.57231 ; support material | |
| G1 X-12.291 Y4.364 E1131.57784 ; support material | |
| G1 F2100.000 E1126.57784 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1131.57784 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1131.59786 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1131.60416 ; support material | |
| G1 X-12.930 Y9.927 E1131.62086 ; support material | |
| G1 X-15.239 Y9.859 E1131.65357 ; support material | |
| G1 X-16.796 Y12.382 E1131.69557 ; support material | |
| G1 X-16.401 Y13.116 E1131.70739 ; support material | |
| G1 X-12.104 Y13.116 E1131.76824 ; support material | |
| G1 X-11.513 Y12.159 E1131.78418 ; support material | |
| G1 X-12.608 Y10.126 E1131.81689 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1131.82874 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1131.88957 ; support material | |
| G1 X-20.844 Y9.883 E1131.90554 ; support material | |
| G1 X-19.749 Y11.916 E1131.93825 ; support material | |
| G1 X-20.490 Y13.116 E1131.95823 ; support material | |
| G1 X-20.045 Y13.116 E1131.96453 ; support material | |
| G1 X-19.427 Y12.115 E1131.98120 ; support material | |
| G1 X-17.119 Y12.183 E1132.01391 ; support material | |
| G1 X-15.561 Y9.660 E1132.05591 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1132.06789 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1132.07419 ; support material | |
| G1 X-21.141 Y9.644 E1132.08439 ; support material | |
| G1 F2100.000 E1127.08439 ; retract | |
| G1 Z10.800 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z10.600 F7800.000 ; restore layer Z | |
| G1 E1132.08439 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1132.09069 F600.000 ; support material | |
| G1 X-21.026 Y4.929 E1132.10660 ; support material | |
| G1 X-21.141 Y4.926 E1132.10823 ; support material | |
| G1 X-21.141 Y5.166 E1132.11164 ; support material | |
| G1 X-20.683 Y5.166 E1132.11814 ; support material | |
| G1 X-20.704 Y5.128 E1132.11876 ; support material | |
| G1 X-19.991 Y3.974 E1132.13797 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1132.15638 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1132.16913 ; support material | |
| G1 X-21.520 Y5.545 E1132.21517 ; support material | |
| G1 X-18.270 Y5.545 E1132.26120 ; support material | |
| G1 X-18.270 Y3.595 E1132.28882 ; support material | |
| G1 X-20.620 Y3.595 E1132.32210 ; support material | |
| M126 ; enable fan | |
| M73 P56 ; update progress | |
| G1 F2100.000 E1127.32210 ; retract | |
| G1 Z10.900 F7800.000 ; move to next layer (104) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z10.700 F7800.000 ; restore layer Z | |
| G1 E1132.32210 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1132.35087 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1133.13817 ; perimeter | |
| G1 X18.184 Y1.159 E1133.16693 ; perimeter | |
| G1 X-18.124 Y1.159 E1133.95293 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1134.00674 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1134.81908 ; perimeter | |
| G1 X18.763 Y1.738 E1134.87290 ; perimeter | |
| G1 X-18.703 Y1.738 E1135.68394 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1135.76280 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1136.60020 ; perimeter | |
| G1 X19.341 Y2.316 E1136.67906 ; perimeter | |
| G1 X-19.281 Y2.316 E1137.51515 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1137.58030 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1138.14177 ; perimeter | |
| G1 X19.820 Y2.795 E1138.20692 ; perimeter | |
| G1 X-19.760 Y2.795 E1138.76754 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1139.94407 F600.000 ; fill | |
| M73 P56 ; update progress | |
| G1 F2100.000 E1134.94407 ; retract | |
| G1 Z11.000 F7800.000 ; move to next layer (105) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.800 F7800.000 ; restore layer Z | |
| G1 E1139.94407 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1139.97283 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1140.76013 ; perimeter | |
| G1 X-18.184 Y-0.169 E1140.78889 ; perimeter | |
| G1 X18.124 Y-0.169 E1141.57489 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1141.62870 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1142.44105 ; perimeter | |
| G1 X-18.763 Y-0.748 E1142.49486 ; perimeter | |
| G1 X18.703 Y-0.748 E1143.30590 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1143.38476 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1144.22216 ; perimeter | |
| G1 X-19.341 Y-1.326 E1144.30102 ; perimeter | |
| G1 X19.281 Y-1.326 E1145.13711 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1145.20227 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1145.76373 ; perimeter | |
| G1 X-19.820 Y-1.805 E1145.82888 ; perimeter | |
| G1 X19.760 Y-1.805 E1146.38950 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1147.56603 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P57 ; update progress | |
| G1 F2100.000 E1142.56603 ; retract | |
| G1 Z11.100 F7800.000 ; move to next layer (106) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1147.56603 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1148.35332 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1148.38209 ; perimeter | |
| G1 X-18.184 Y1.159 E1149.16938 ; perimeter | |
| G1 X-18.184 Y-0.109 E1149.19685 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1150.00919 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1150.06301 ; perimeter | |
| G1 X-18.763 Y1.738 E1150.87535 ; perimeter | |
| G1 X-18.763 Y-0.688 E1150.92786 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1151.76526 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1151.84412 ; perimeter | |
| G1 X-19.341 Y2.316 E1152.68151 ; perimeter | |
| G1 X-19.341 Y-1.266 E1152.75907 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1153.32054 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1153.38569 ; perimeter | |
| G1 X-19.820 Y2.795 E1153.94715 ; perimeter | |
| G1 X-19.820 Y-1.745 E1154.01146 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1155.18799 F600.000 ; fill | |
| M73 P57 ; update progress | |
| G1 F2100.000 E1150.18799 ; retract | |
| G1 Z11.100 F7800.000 ; move to next layer (36) and lift | |
| G1 X21.141 Y4.544 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1155.18799 F2100.000 ; compensate retraction | |
| G1 X21.141 Y2.674 E1155.21447 F600.000 ; support material | |
| G1 X20.999 Y2.674 E1155.21650 ; support material | |
| G1 X20.999 Y3.974 E1155.23491 ; support material | |
| G1 X17.509 Y3.974 E1155.28435 ; support material | |
| G1 X17.509 Y5.366 E1155.30407 ; support material | |
| G1 X20.633 Y5.366 E1155.34834 ; support material | |
| G1 X21.141 Y4.544 E1155.36203 ; support material | |
| G1 X21.141 Y5.366 F7800.000 ; move to first support material point | |
| G1 X21.141 Y5.264 E1155.36348 F600.000 ; support material | |
| G1 X21.078 Y5.366 E1155.36519 ; support material | |
| G1 X21.141 Y5.366 E1155.36608 ; support material | |
| G1 X21.520 Y5.745 F7800.000 ; move to first support material point | |
| G1 X21.520 Y2.295 E1155.41495 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1155.42769 ; support material | |
| G1 X20.620 Y3.595 E1155.44611 ; support material | |
| G1 X17.130 Y3.595 E1155.49554 ; support material | |
| G1 X17.130 Y5.745 E1155.52599 ; support material | |
| G1 X21.520 Y5.745 E1155.58817 ; support material | |
| G1 F2100.000 E1150.58817 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1155.58817 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1155.59838 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1155.62880 ; support material | |
| G1 X17.705 Y10.831 E1155.66151 ; support material | |
| G1 X16.294 Y13.116 E1155.69956 ; support material | |
| G1 X21.141 Y13.116 E1155.76822 ; support material | |
| G1 X21.141 Y12.595 E1155.77561 ; support material | |
| G1 X20.335 Y11.098 E1155.79969 ; support material | |
| G1 X21.141 Y9.792 E1155.82143 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1155.86634 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1155.89849 ; support material | |
| G1 X13.195 Y12.888 E1155.93120 ; support material | |
| G1 X13.054 Y13.116 E1155.93500 ; support material | |
| G1 X13.498 Y13.116 E1155.94130 ; support material | |
| G1 X13.517 Y13.087 E1155.94180 ; support material | |
| G1 X14.519 Y13.116 E1155.95600 ; support material | |
| G1 X15.849 Y13.116 E1155.97484 ; support material | |
| G1 X17.383 Y10.632 E1156.01619 ; support material | |
| G1 X16.462 Y8.924 E1156.04368 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1156.10727 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1156.13084 ; support material | |
| G1 X7.589 Y12.912 E1156.17284 ; support material | |
| G1 X5.281 Y12.844 E1156.20555 ; support material | |
| G1 X5.112 Y13.116 E1156.21009 ; support material | |
| G1 X7.914 Y13.116 E1156.24977 ; support material | |
| G1 X9.469 Y10.588 E1156.29182 ; support material | |
| G1 X11.777 Y10.656 E1156.32453 ; support material | |
| G1 X12.847 Y8.924 E1156.35336 ; support material | |
| G1 F2100.000 E1151.35336 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X11.930 Y5.745 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1156.35336 F2100.000 ; compensate retraction | |
| G1 X11.930 Y3.595 E1156.38382 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1156.42197 ; support material | |
| G1 X8.201 Y5.745 E1156.45577 ; support material | |
| G1 X11.930 Y5.745 E1156.50859 ; support material | |
| G1 X9.143 Y5.366 F7800.000 ; move to first support material point | |
| G1 X8.964 Y5.034 E1156.51394 F600.000 ; support material | |
| G1 X8.803 Y5.366 E1156.51917 ; support material | |
| G1 X9.143 Y5.366 E1156.52398 ; support material | |
| G1 F2100.000 E1151.52398 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1156.52398 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1156.53028 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1156.55507 ; support material | |
| G1 X1.233 Y10.345 E1156.58778 ; support material | |
| G1 X-0.325 Y12.868 E1156.62978 ; support material | |
| G1 X-0.191 Y13.116 E1156.63378 ; support material | |
| G1 X4.668 Y13.116 E1156.70259 ; support material | |
| G1 X4.959 Y12.645 E1156.71044 ; support material | |
| G1 X3.863 Y10.612 E1156.74315 ; support material | |
| G1 X4.906 Y8.924 E1156.77126 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1156.78310 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1156.89470 ; support material | |
| G1 X-5.270 Y8.545 E1156.90537 ; support material | |
| G1 X-21.520 Y8.545 E1157.13554 ; support material | |
| G1 X-21.520 Y13.495 E1157.20565 ; support material | |
| G1 X21.520 Y13.495 E1157.81527 ; support material | |
| G1 X21.520 Y8.545 E1157.88538 ; support material | |
| G1 X2.246 Y8.545 E1158.15838 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1158.19017 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1158.23070 ; support material | |
| G1 X-4.372 Y10.369 E1158.26730 ; support material | |
| G1 X-3.277 Y12.402 E1158.30001 ; support material | |
| G1 X-3.718 Y13.116 E1158.31190 ; support material | |
| G1 X-3.273 Y13.116 E1158.31820 ; support material | |
| G1 X-2.955 Y12.601 E1158.32678 ; support material | |
| G1 X-0.647 Y12.669 E1158.35949 ; support material | |
| G1 X0.911 Y10.146 E1158.40149 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1158.43478 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1158.45506 ; support material | |
| G1 X-4.891 Y8.924 E1158.46573 ; support material | |
| G1 X-7.853 Y8.924 E1158.50767 ; support material | |
| G1 X-7.325 Y9.903 E1158.52343 ; support material | |
| G1 X-8.883 Y12.426 E1158.56543 ; support material | |
| G1 X-11.191 Y12.358 E1158.59814 ; support material | |
| G1 X-11.659 Y13.116 E1158.61077 ; support material | |
| G1 X-8.296 Y13.116 E1158.65841 ; support material | |
| G1 X-8.561 Y12.625 E1158.66632 ; support material | |
| G1 X-7.003 Y10.102 E1158.70831 ; support material | |
| G1 X-4.695 Y10.170 E1158.74102 ; support material | |
| G1 F2100.000 E1153.74102 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X-8.545 Y4.136 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1158.74102 F2100.000 ; compensate retraction | |
| G1 X-8.749 Y3.974 E1158.74472 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1158.78518 ; support material | |
| G1 X-12.465 Y5.366 E1158.80836 ; support material | |
| G1 X-8.545 Y5.366 E1158.86389 ; support material | |
| G1 X-8.545 Y4.136 E1158.88132 ; support material | |
| G1 X-8.236 Y3.899 F7800.000 ; move to first support material point | |
| G1 X-8.616 Y3.595 E1158.88821 F600.000 ; support material | |
| G1 X-12.870 Y3.595 E1158.94846 ; support material | |
| G1 X-12.870 Y5.745 E1158.97891 ; support material | |
| G1 X-8.167 Y5.745 E1159.04553 ; support material | |
| G1 X-8.167 Y4.042 E1159.06965 ; support material | |
| G1 X-8.123 Y3.988 E1159.07063 ; support material | |
| G1 X-8.167 Y3.954 E1159.07141 ; support material | |
| G1 X-8.167 Y3.899 E1159.07219 ; support material | |
| G1 X-8.236 Y3.899 E1159.07317 ; support material | |
| G1 X-12.491 Y4.688 F7800.000 ; move to first support material point | |
| G1 X-12.050 Y3.974 E1159.08507 F600.000 ; support material | |
| G1 X-12.491 Y3.974 E1159.09132 ; support material | |
| G1 X-12.491 Y4.688 E1159.10144 ; support material | |
| G1 F2100.000 E1154.10144 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1159.10144 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1159.12146 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1159.12776 ; support material | |
| G1 X-12.930 Y9.927 E1159.14446 ; support material | |
| G1 X-15.239 Y9.859 E1159.17717 ; support material | |
| G1 X-16.796 Y12.382 E1159.21917 ; support material | |
| G1 X-16.401 Y13.116 E1159.23099 ; support material | |
| G1 X-12.104 Y13.116 E1159.29184 ; support material | |
| G1 X-11.513 Y12.159 E1159.30778 ; support material | |
| G1 X-12.608 Y10.126 E1159.34049 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1159.35234 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1159.41316 ; support material | |
| G1 X-20.844 Y9.883 E1159.42913 ; support material | |
| G1 X-19.749 Y11.916 E1159.46184 ; support material | |
| G1 X-20.490 Y13.116 E1159.48183 ; support material | |
| G1 X-20.045 Y13.116 E1159.48813 ; support material | |
| G1 X-19.427 Y12.115 E1159.50480 ; support material | |
| G1 X-17.119 Y12.183 E1159.53751 ; support material | |
| G1 X-15.561 Y9.660 E1159.57951 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1159.59149 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1159.59779 ; support material | |
| G1 X-21.141 Y9.644 E1159.60799 ; support material | |
| G1 F2100.000 E1154.60799 ; retract | |
| G1 Z11.100 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z10.900 F7800.000 ; restore layer Z | |
| G1 E1159.60799 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1159.61429 F600.000 ; support material | |
| G1 X-21.026 Y4.929 E1159.63020 ; support material | |
| G1 X-21.141 Y4.926 E1159.63183 ; support material | |
| G1 X-21.141 Y5.366 E1159.63808 ; support material | |
| G1 X-20.575 Y5.366 E1159.64609 ; support material | |
| G1 X-20.704 Y5.128 E1159.64993 ; support material | |
| G1 X-19.991 Y3.974 E1159.66915 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1159.68756 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1159.70031 ; support material | |
| G1 X-21.520 Y5.745 E1159.74917 ; support material | |
| G1 X-18.070 Y5.745 E1159.79804 ; support material | |
| G1 X-18.070 Y3.595 E1159.82849 ; support material | |
| G1 X-20.620 Y3.595 E1159.86461 ; support material | |
| M126 ; enable fan | |
| M73 P57 ; update progress | |
| G1 F2100.000 E1154.86461 ; retract | |
| G1 Z11.200 F7800.000 ; move to next layer (107) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z11.000 F7800.000 ; restore layer Z | |
| G1 E1159.86461 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1159.89338 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1160.68067 ; perimeter | |
| G1 X18.184 Y1.159 E1160.70944 ; perimeter | |
| G1 X-18.124 Y1.159 E1161.49543 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1161.54925 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1162.36159 ; perimeter | |
| G1 X18.763 Y1.738 E1162.41540 ; perimeter | |
| G1 X-18.703 Y1.738 E1163.22645 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1163.30531 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1164.14270 ; perimeter | |
| G1 X19.341 Y2.316 E1164.22156 ; perimeter | |
| G1 X-19.281 Y2.316 E1165.05766 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1165.12281 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1165.68428 ; perimeter | |
| G1 X19.820 Y2.795 E1165.74943 ; perimeter | |
| G1 X-19.760 Y2.795 E1166.31004 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1167.48657 F600.000 ; fill | |
| M73 P58 ; update progress | |
| G1 F2100.000 E1162.48657 ; retract | |
| G1 Z11.300 F7800.000 ; move to next layer (108) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.100 F7800.000 ; restore layer Z | |
| G1 E1167.48657 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1167.51534 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1168.30263 ; perimeter | |
| G1 X-18.184 Y-0.169 E1168.33140 ; perimeter | |
| G1 X18.124 Y-0.169 E1169.11740 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1169.17121 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1169.98355 ; perimeter | |
| G1 X-18.763 Y-0.748 E1170.03736 ; perimeter | |
| G1 X18.703 Y-0.748 E1170.84841 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1170.92727 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1171.76466 ; perimeter | |
| G1 X-19.341 Y-1.326 E1171.84352 ; perimeter | |
| G1 X19.281 Y-1.326 E1172.67962 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1172.74477 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1173.30624 ; perimeter | |
| G1 X-19.820 Y-1.805 E1173.37139 ; perimeter | |
| G1 X19.760 Y-1.805 E1173.93200 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1175.10853 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P58 ; update progress | |
| G1 F2100.000 E1170.10853 ; retract | |
| G1 Z11.400 F7800.000 ; move to next layer (109) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1175.10853 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1175.89583 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1175.92459 ; perimeter | |
| G1 X-18.184 Y1.159 E1176.71189 ; perimeter | |
| G1 X-18.184 Y-0.109 E1176.73936 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1177.55170 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1177.60551 ; perimeter | |
| G1 X-18.763 Y1.738 E1178.41786 ; perimeter | |
| G1 X-18.763 Y-0.688 E1178.47037 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1179.30776 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1179.38662 ; perimeter | |
| G1 X-19.341 Y2.316 E1180.22402 ; perimeter | |
| G1 X-19.341 Y-1.266 E1180.30158 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1180.86304 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1180.92820 ; perimeter | |
| G1 X-19.820 Y2.795 E1181.48966 ; perimeter | |
| G1 X-19.820 Y-1.745 E1181.55397 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1182.73049 F600.000 ; fill | |
| M73 P59 ; update progress | |
| G1 F2100.000 E1177.73049 ; retract | |
| G1 Z11.400 F7800.000 ; move to next layer (37) and lift | |
| G1 X21.141 Y4.544 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1182.73049 F2100.000 ; compensate retraction | |
| G1 X21.141 Y2.674 E1182.75698 F600.000 ; support material | |
| G1 X20.999 Y2.674 E1182.75901 ; support material | |
| G1 X20.999 Y3.974 E1182.77742 ; support material | |
| G1 X17.309 Y3.974 E1182.82968 ; support material | |
| G1 X17.309 Y5.479 E1182.85101 ; support material | |
| G1 X17.356 Y5.566 E1182.85242 ; support material | |
| G1 X20.510 Y5.566 E1182.89709 ; support material | |
| G1 X21.141 Y4.544 E1182.91412 ; support material | |
| G1 X21.141 Y5.566 F7800.000 ; move to first support material point | |
| G1 X21.141 Y5.264 E1182.91840 F600.000 ; support material | |
| G1 X20.955 Y5.566 E1182.92343 ; support material | |
| G1 X21.141 Y5.566 E1182.92608 ; support material | |
| G1 X21.520 Y5.945 F7800.000 ; move to first support material point | |
| G1 X21.520 Y2.295 E1182.97778 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1182.99052 ; support material | |
| G1 X20.620 Y3.595 E1183.00894 ; support material | |
| G1 X16.930 Y3.595 E1183.06120 ; support material | |
| G1 X16.930 Y5.945 E1183.09449 ; support material | |
| G1 X21.520 Y5.945 E1183.15950 ; support material | |
| G1 F2100.000 E1178.15950 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1183.15950 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1183.16971 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1183.20013 ; support material | |
| G1 X17.705 Y10.831 E1183.23284 ; support material | |
| G1 X16.294 Y13.116 E1183.27089 ; support material | |
| G1 X21.141 Y13.116 E1183.33955 ; support material | |
| G1 X21.141 Y12.595 E1183.34694 ; support material | |
| G1 X20.335 Y11.098 E1183.37102 ; support material | |
| G1 X21.141 Y9.792 E1183.39276 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1183.43767 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1183.46982 ; support material | |
| G1 X13.195 Y12.888 E1183.50253 ; support material | |
| G1 X13.054 Y13.116 E1183.50633 ; support material | |
| G1 X13.498 Y13.116 E1183.51263 ; support material | |
| G1 X13.517 Y13.087 E1183.51312 ; support material | |
| G1 X14.519 Y13.116 E1183.52733 ; support material | |
| G1 X15.849 Y13.116 E1183.54616 ; support material | |
| G1 X17.383 Y10.632 E1183.58752 ; support material | |
| G1 X16.462 Y8.924 E1183.61501 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1183.67860 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1183.70217 ; support material | |
| G1 X7.589 Y12.912 E1183.74417 ; support material | |
| G1 X5.281 Y12.844 E1183.77688 ; support material | |
| G1 X5.112 Y13.116 E1183.78142 ; support material | |
| G1 X7.914 Y13.116 E1183.82110 ; support material | |
| G1 X9.469 Y10.588 E1183.86314 ; support material | |
| G1 X11.777 Y10.656 E1183.89586 ; support material | |
| G1 X12.847 Y8.924 E1183.92469 ; support material | |
| G1 F2100.000 E1178.92469 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X12.130 Y5.945 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1183.92469 F2100.000 ; compensate retraction | |
| G1 X12.130 Y3.595 E1183.95798 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1183.99896 ; support material | |
| G1 X8.105 Y5.945 E1184.03591 ; support material | |
| G1 X12.130 Y5.945 E1184.09292 ; support material | |
| G1 X9.251 Y5.566 F7800.000 ; move to first support material point | |
| G1 X8.964 Y5.034 E1184.10149 F600.000 ; support material | |
| G1 X8.707 Y5.566 E1184.10987 ; support material | |
| G1 X9.251 Y5.566 E1184.11757 ; support material | |
| G1 F2100.000 E1179.11757 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1184.11757 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1184.12387 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1184.14866 ; support material | |
| G1 X1.233 Y10.345 E1184.18137 ; support material | |
| G1 X-0.325 Y12.868 E1184.22337 ; support material | |
| G1 X-0.191 Y13.116 E1184.22737 ; support material | |
| G1 X4.668 Y13.116 E1184.29618 ; support material | |
| G1 X4.959 Y12.645 E1184.30403 ; support material | |
| G1 X3.863 Y10.612 E1184.33674 ; support material | |
| G1 X4.906 Y8.924 E1184.36484 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1184.37669 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1184.48829 ; support material | |
| G1 X-5.270 Y8.545 E1184.49896 ; support material | |
| G1 X-21.520 Y8.545 E1184.72912 ; support material | |
| G1 X-21.520 Y13.495 E1184.79924 ; support material | |
| G1 X21.520 Y13.495 E1185.40886 ; support material | |
| G1 X21.520 Y8.545 E1185.47897 ; support material | |
| G1 X2.246 Y8.545 E1185.75197 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1185.78376 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1185.82429 ; support material | |
| G1 X-4.372 Y10.369 E1185.86089 ; support material | |
| G1 X-3.277 Y12.402 E1185.89360 ; support material | |
| G1 X-3.718 Y13.116 E1185.90549 ; support material | |
| G1 X-3.273 Y13.116 E1185.91179 ; support material | |
| G1 X-2.955 Y12.601 E1185.92037 ; support material | |
| G1 X-0.647 Y12.669 E1185.95308 ; support material | |
| G1 X0.911 Y10.146 E1185.99508 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1186.02837 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1186.04865 ; support material | |
| G1 X-4.891 Y8.924 E1186.05932 ; support material | |
| G1 X-7.853 Y8.924 E1186.10126 ; support material | |
| G1 X-7.325 Y9.903 E1186.11702 ; support material | |
| G1 X-8.883 Y12.426 E1186.15902 ; support material | |
| G1 X-11.191 Y12.358 E1186.19173 ; support material | |
| G1 X-11.659 Y13.116 E1186.20435 ; support material | |
| G1 X-8.296 Y13.116 E1186.25200 ; support material | |
| G1 X-8.561 Y12.625 E1186.25990 ; support material | |
| G1 X-7.003 Y10.102 E1186.30190 ; support material | |
| G1 X-4.695 Y10.170 E1186.33461 ; support material | |
| G1 F2100.000 E1181.33461 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X-8.545 Y4.136 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1186.33461 F2100.000 ; compensate retraction | |
| G1 X-8.749 Y3.974 E1186.33830 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1186.37876 ; support material | |
| G1 X-12.468 Y5.371 E1186.40202 ; support material | |
| G1 X-12.363 Y5.566 E1186.40517 ; support material | |
| G1 X-8.545 Y5.566 E1186.45924 ; support material | |
| G1 X-8.545 Y4.136 E1186.47950 ; support material | |
| G1 X-8.236 Y3.899 F7800.000 ; move to first support material point | |
| G1 X-8.616 Y3.595 E1186.48640 F600.000 ; support material | |
| G1 X-13.070 Y3.595 E1186.54948 ; support material | |
| G1 X-13.070 Y5.945 E1186.58276 ; support material | |
| G1 X-8.167 Y5.945 E1186.65222 ; support material | |
| G1 X-8.167 Y4.042 E1186.67916 ; support material | |
| G1 X-8.123 Y3.988 E1186.68015 ; support material | |
| G1 X-8.167 Y3.954 E1186.68093 ; support material | |
| G1 X-8.167 Y3.899 E1186.68171 ; support material | |
| G1 X-8.236 Y3.899 E1186.68269 ; support material | |
| G1 X-12.691 Y5.012 F7800.000 ; move to first support material point | |
| G1 X-12.050 Y3.974 E1186.69998 F600.000 ; support material | |
| G1 X-12.691 Y3.974 E1186.70906 ; support material | |
| G1 X-12.691 Y5.012 E1186.72377 ; support material | |
| G1 F2100.000 E1181.72377 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1186.72377 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1186.74379 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1186.75009 ; support material | |
| G1 X-12.930 Y9.927 E1186.76679 ; support material | |
| G1 X-15.239 Y9.859 E1186.79950 ; support material | |
| G1 X-16.796 Y12.382 E1186.84150 ; support material | |
| G1 X-16.401 Y13.116 E1186.85332 ; support material | |
| G1 X-12.104 Y13.116 E1186.91418 ; support material | |
| G1 X-11.513 Y12.159 E1186.93011 ; support material | |
| G1 X-12.608 Y10.126 E1186.96282 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1186.97467 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1187.03550 ; support material | |
| G1 X-20.844 Y9.883 E1187.05147 ; support material | |
| G1 X-19.749 Y11.916 E1187.08418 ; support material | |
| G1 X-20.490 Y13.116 E1187.10416 ; support material | |
| G1 X-20.045 Y13.116 E1187.11046 ; support material | |
| G1 X-19.427 Y12.115 E1187.12713 ; support material | |
| G1 X-17.119 Y12.183 E1187.15984 ; support material | |
| G1 X-15.561 Y9.660 E1187.20184 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1187.21383 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1187.22012 ; support material | |
| G1 X-21.141 Y9.644 E1187.23032 ; support material | |
| G1 F2100.000 E1182.23032 ; retract | |
| G1 Z11.400 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z11.200 F7800.000 ; restore layer Z | |
| G1 E1187.23032 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1187.23663 F600.000 ; support material | |
| G1 X-21.026 Y4.929 E1187.25253 ; support material | |
| G1 X-21.141 Y4.926 E1187.25417 ; support material | |
| G1 X-21.141 Y5.566 E1187.26324 ; support material | |
| G1 X-20.468 Y5.566 E1187.27278 ; support material | |
| G1 X-20.704 Y5.128 E1187.27984 ; support material | |
| G1 X-19.991 Y3.974 E1187.29906 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1187.31747 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1187.33022 ; support material | |
| G1 X-21.520 Y5.945 E1187.38192 ; support material | |
| G1 X-17.870 Y5.945 E1187.43361 ; support material | |
| G1 X-17.870 Y3.595 E1187.46690 ; support material | |
| G1 X-20.620 Y3.595 E1187.50585 ; support material | |
| M126 ; enable fan | |
| M73 P59 ; update progress | |
| G1 F2100.000 E1182.50585 ; retract | |
| G1 Z11.500 F7800.000 ; move to next layer (110) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z11.300 F7800.000 ; restore layer Z | |
| G1 E1187.50585 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1187.53462 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1188.32191 ; perimeter | |
| G1 X18.184 Y1.159 E1188.35068 ; perimeter | |
| G1 X-18.124 Y1.159 E1189.13667 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1189.19049 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1190.00283 ; perimeter | |
| G1 X18.763 Y1.738 E1190.05664 ; perimeter | |
| G1 X-18.703 Y1.738 E1190.86769 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1190.94655 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1191.78394 ; perimeter | |
| G1 X19.341 Y2.316 E1191.86280 ; perimeter | |
| G1 X-19.281 Y2.316 E1192.69890 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1192.76405 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1193.32552 ; perimeter | |
| G1 X19.820 Y2.795 E1193.39067 ; perimeter | |
| G1 X-19.760 Y2.795 E1193.95128 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1195.12781 F600.000 ; fill | |
| M73 P59 ; update progress | |
| G1 F2100.000 E1190.12781 ; retract | |
| G1 Z11.600 F7800.000 ; move to next layer (111) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.400 F7800.000 ; restore layer Z | |
| G1 E1195.12781 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1195.15658 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1195.94387 ; perimeter | |
| G1 X-18.184 Y-0.169 E1195.97264 ; perimeter | |
| G1 X18.124 Y-0.169 E1196.75864 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1196.81245 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1197.62479 ; perimeter | |
| G1 X-18.763 Y-0.748 E1197.67861 ; perimeter | |
| G1 X18.703 Y-0.748 E1198.48965 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1198.56851 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1199.40590 ; perimeter | |
| G1 X-19.341 Y-1.326 E1199.48476 ; perimeter | |
| G1 X19.281 Y-1.326 E1200.32086 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1200.38601 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1200.94748 ; perimeter | |
| G1 X-19.820 Y-1.805 E1201.01263 ; perimeter | |
| G1 X19.760 Y-1.805 E1201.57325 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1202.74977 F600.000 ; fill | |
| M126 ; enable fan | |
| M73 P60 ; update progress | |
| G1 F2100.000 E1197.74977 ; retract | |
| G1 Z11.700 F7800.000 ; move to next layer (112) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1202.74977 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1203.53707 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1203.56583 ; perimeter | |
| G1 X-18.184 Y1.159 E1204.35313 ; perimeter | |
| G1 X-18.184 Y-0.109 E1204.38060 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1205.19294 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1205.24675 ; perimeter | |
| G1 X-18.763 Y1.738 E1206.05910 ; perimeter | |
| G1 X-18.763 Y-0.688 E1206.11161 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1206.94900 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1207.02787 ; perimeter | |
| G1 X-19.341 Y2.316 E1207.86526 ; perimeter | |
| G1 X-19.341 Y-1.266 E1207.94282 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1208.50428 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1208.56944 ; perimeter | |
| G1 X-19.820 Y2.795 E1209.13090 ; perimeter | |
| G1 X-19.820 Y-1.745 E1209.19521 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1210.37173 F600.000 ; fill | |
| M73 P60 ; update progress | |
| G1 F2100.000 E1205.37173 ; retract | |
| G1 Z11.700 F7800.000 ; move to next layer (38) and lift | |
| G1 X21.141 Y4.544 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1210.37173 F2100.000 ; compensate retraction | |
| G1 X21.141 Y2.674 E1210.39822 F600.000 ; support material | |
| G1 X20.999 Y2.674 E1210.40025 ; support material | |
| G1 X20.999 Y3.974 E1210.41866 ; support material | |
| G1 X17.109 Y3.974 E1210.47376 ; support material | |
| G1 X17.109 Y5.108 E1210.48982 ; support material | |
| G1 X17.463 Y5.766 E1210.50042 ; support material | |
| G1 X20.386 Y5.766 E1210.54182 ; support material | |
| G1 X21.141 Y4.544 E1210.56218 ; support material | |
| G1 X21.141 Y5.766 F7800.000 ; move to first support material point | |
| G1 X21.141 Y5.264 E1210.56929 F600.000 ; support material | |
| G1 X20.831 Y5.766 E1210.57766 ; support material | |
| G1 X21.141 Y5.766 E1210.58205 ; support material | |
| G1 X21.520 Y6.145 F7800.000 ; move to first support material point | |
| G1 X21.520 Y2.295 E1210.63658 F600.000 ; support material | |
| G1 X20.620 Y2.295 E1210.64933 ; support material | |
| G1 X20.620 Y3.595 E1210.66774 ; support material | |
| G1 X16.730 Y3.595 E1210.72284 ; support material | |
| G1 X16.730 Y6.145 E1210.75896 ; support material | |
| G1 X21.520 Y6.145 E1210.82680 ; support material | |
| G1 F2100.000 E1205.82680 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X21.141 Y9.792 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1210.82680 F2100.000 ; compensate retraction | |
| G1 X21.141 Y9.071 E1210.83701 F600.000 ; support material | |
| G1 X20.013 Y10.899 E1210.86743 ; support material | |
| G1 X17.705 Y10.831 E1210.90014 ; support material | |
| G1 X16.294 Y13.116 E1210.93819 ; support material | |
| G1 X21.141 Y13.116 E1211.00685 ; support material | |
| G1 X21.141 Y12.595 E1211.01425 ; support material | |
| G1 X20.335 Y11.098 E1211.03832 ; support material | |
| G1 X21.141 Y9.792 E1211.06006 ; support material | |
| G1 X16.462 Y8.924 F7800.000 ; move to first support material point | |
| G1 X13.292 Y8.924 E1211.10497 F600.000 ; support material | |
| G1 X12.099 Y10.855 E1211.13712 ; support material | |
| G1 X13.195 Y12.888 E1211.16983 ; support material | |
| G1 X13.054 Y13.116 E1211.17363 ; support material | |
| G1 X13.498 Y13.116 E1211.17993 ; support material | |
| G1 X13.517 Y13.087 E1211.18043 ; support material | |
| G1 X14.519 Y13.116 E1211.19463 ; support material | |
| G1 X15.849 Y13.116 E1211.21347 ; support material | |
| G1 X17.383 Y10.632 E1211.25482 ; support material | |
| G1 X16.462 Y8.924 E1211.28231 ; support material | |
| G1 X12.847 Y8.924 F7800.000 ; move to first support material point | |
| G1 X8.357 Y8.924 E1211.34590 F600.000 ; support material | |
| G1 X9.147 Y10.389 E1211.36948 ; support material | |
| G1 X7.589 Y12.912 E1211.41147 ; support material | |
| G1 X5.281 Y12.844 E1211.44418 ; support material | |
| G1 X5.112 Y13.116 E1211.44872 ; support material | |
| G1 X7.914 Y13.116 E1211.48840 ; support material | |
| G1 X9.469 Y10.588 E1211.53045 ; support material | |
| G1 X11.777 Y10.656 E1211.56316 ; support material | |
| G1 X12.847 Y8.924 E1211.59200 ; support material | |
| G1 F2100.000 E1206.59200 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X12.330 Y6.145 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1211.59200 F2100.000 ; compensate retraction | |
| G1 X12.330 Y3.595 E1211.62811 F600.000 ; support material | |
| G1 X9.236 Y3.595 E1211.67193 ; support material | |
| G1 X8.008 Y6.145 E1211.71202 ; support material | |
| G1 X12.330 Y6.145 E1211.77323 ; support material | |
| G1 X9.287 Y5.634 F7800.000 ; move to first support material point | |
| G1 X8.964 Y5.034 E1211.78289 F600.000 ; support material | |
| G1 X8.611 Y5.766 E1211.79441 ; support material | |
| G1 X9.205 Y5.766 E1211.80283 ; support material | |
| G1 X9.287 Y5.634 E1211.80503 ; support material | |
| G1 F2100.000 E1206.80503 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X4.906 Y8.924 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1211.80503 F2100.000 ; compensate retraction | |
| G1 X4.461 Y8.924 E1211.81133 F600.000 ; support material | |
| G1 X3.541 Y10.413 E1211.83613 ; support material | |
| G1 X1.233 Y10.345 E1211.86884 ; support material | |
| G1 X-0.325 Y12.868 E1211.91083 ; support material | |
| G1 X-0.191 Y13.116 E1211.91483 ; support material | |
| G1 X4.668 Y13.116 E1211.98365 ; support material | |
| G1 X4.959 Y12.645 E1211.99150 ; support material | |
| G1 X3.863 Y10.612 E1212.02421 ; support material | |
| G1 X4.906 Y8.924 E1212.05231 ; support material | |
| G1 X2.246 Y8.545 F7800.000 ; move to first support material point | |
| G1 X2.609 Y7.792 E1212.06415 F600.000 ; support material | |
| G1 X-5.270 Y7.792 E1212.17575 ; support material | |
| G1 X-5.270 Y8.545 E1212.18643 ; support material | |
| G1 X-21.520 Y8.545 E1212.41659 ; support material | |
| G1 X-21.520 Y13.495 E1212.48670 ; support material | |
| G1 X21.520 Y13.495 E1213.09633 ; support material | |
| G1 X21.520 Y8.545 E1213.16644 ; support material | |
| G1 X2.246 Y8.545 E1213.43943 ; support material | |
| G1 X0.911 Y10.146 F7800.000 ; move to first support material point | |
| G1 X-0.154 Y8.170 E1213.47122 F600.000 ; support material | |
| G1 X-3.015 Y8.170 E1213.51175 ; support material | |
| G1 X-4.372 Y10.369 E1213.54835 ; support material | |
| G1 X-3.277 Y12.402 E1213.58106 ; support material | |
| G1 X-3.718 Y13.116 E1213.59296 ; support material | |
| G1 X-3.273 Y13.116 E1213.59926 ; support material | |
| G1 X-2.955 Y12.601 E1213.60784 ; support material | |
| G1 X-0.647 Y12.669 E1213.64055 ; support material | |
| G1 X0.911 Y10.146 E1213.68255 ; support material | |
| G1 X-4.695 Y10.170 F7800.000 ; move to first support material point | |
| G1 X-3.460 Y8.170 E1213.71584 F600.000 ; support material | |
| G1 X-4.891 Y8.170 E1213.73611 ; support material | |
| G1 X-4.891 Y8.924 E1213.74678 ; support material | |
| G1 X-7.853 Y8.924 E1213.78873 ; support material | |
| G1 X-7.325 Y9.903 E1213.80449 ; support material | |
| G1 X-8.883 Y12.426 E1213.84648 ; support material | |
| G1 X-11.191 Y12.358 E1213.87919 ; support material | |
| G1 X-11.659 Y13.116 E1213.89182 ; support material | |
| G1 X-8.296 Y13.116 E1213.93946 ; support material | |
| G1 X-8.561 Y12.625 E1213.94737 ; support material | |
| G1 X-7.003 Y10.102 E1213.98937 ; support material | |
| G1 X-4.695 Y10.170 E1214.02208 ; support material | |
| G1 F2100.000 E1209.02208 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X-8.545 Y4.136 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1214.02208 F2100.000 ; compensate retraction | |
| G1 X-8.749 Y3.974 E1214.02577 F600.000 ; support material | |
| G1 X-11.605 Y3.974 E1214.06623 ; support material | |
| G1 X-12.468 Y5.371 E1214.08949 ; support material | |
| G1 X-12.255 Y5.766 E1214.09585 ; support material | |
| G1 X-8.545 Y5.766 E1214.14840 ; support material | |
| G1 X-8.545 Y4.136 E1214.17149 ; support material | |
| G1 X-8.236 Y3.899 F7800.000 ; move to first support material point | |
| G1 X-8.616 Y3.595 E1214.17839 F600.000 ; support material | |
| G1 X-13.270 Y3.595 E1214.24430 ; support material | |
| G1 X-13.270 Y6.145 E1214.28042 ; support material | |
| G1 X-8.167 Y6.145 E1214.35271 ; support material | |
| G1 X-8.167 Y4.042 E1214.38249 ; support material | |
| G1 X-8.123 Y3.988 E1214.38347 ; support material | |
| G1 X-8.167 Y3.954 E1214.38425 ; support material | |
| G1 X-8.167 Y3.899 E1214.38503 ; support material | |
| G1 X-8.236 Y3.899 E1214.38602 ; support material | |
| G1 X-12.790 Y5.172 F7800.000 ; move to first support material point | |
| G1 X-12.050 Y3.974 E1214.40597 F600.000 ; support material | |
| G1 X-12.891 Y3.974 E1214.41788 ; support material | |
| G1 X-12.891 Y5.169 E1214.43481 ; support material | |
| G1 X-12.790 Y5.172 E1214.43625 ; support material | |
| G1 F2100.000 E1209.43625 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X-12.608 Y10.126 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1214.43625 F2100.000 ; compensate retraction | |
| G1 X-11.866 Y8.924 E1214.45626 F600.000 ; support material | |
| G1 X-12.311 Y8.924 E1214.46256 ; support material | |
| G1 X-12.930 Y9.927 E1214.47927 ; support material | |
| G1 X-15.239 Y9.859 E1214.51198 ; support material | |
| G1 X-16.796 Y12.382 E1214.55398 ; support material | |
| G1 X-16.401 Y13.116 E1214.56579 ; support material | |
| G1 X-12.104 Y13.116 E1214.62665 ; support material | |
| G1 X-11.513 Y12.159 E1214.64259 ; support material | |
| G1 X-12.608 Y10.126 E1214.67530 ; support material | |
| G1 X-15.561 Y9.660 F7800.000 ; move to first support material point | |
| G1 X-15.958 Y8.924 E1214.68715 F600.000 ; support material | |
| G1 X-20.252 Y8.924 E1214.74797 ; support material | |
| G1 X-20.844 Y9.883 E1214.76394 ; support material | |
| G1 X-19.749 Y11.916 E1214.79665 ; support material | |
| G1 X-20.490 Y13.116 E1214.81663 ; support material | |
| G1 X-20.045 Y13.116 E1214.82293 ; support material | |
| G1 X-19.427 Y12.115 E1214.83961 ; support material | |
| G1 X-17.119 Y12.183 E1214.87232 ; support material | |
| G1 X-15.561 Y9.660 E1214.91431 ; support material | |
| G1 X-21.141 Y9.644 F7800.000 ; move to first support material point | |
| G1 X-20.697 Y8.924 E1214.92630 F600.000 ; support material | |
| G1 X-21.141 Y8.924 E1214.93260 ; support material | |
| G1 X-21.141 Y9.644 E1214.94280 ; support material | |
| G1 F2100.000 E1209.94280 ; retract | |
| G1 Z11.700 F7800.000 ; lift plate during travel | |
| G1 X-19.991 Y3.974 F7800.000 ; move to first support material point | |
| G1 Z11.500 F7800.000 ; restore layer Z | |
| G1 E1214.94280 F2100.000 ; compensate retraction | |
| G1 X-20.436 Y3.974 E1214.94910 F600.000 ; support material | |
| G1 X-21.026 Y4.929 E1214.96501 ; support material | |
| G1 X-21.141 Y4.926 E1214.96664 ; support material | |
| G1 X-21.141 Y5.766 E1214.97855 ; support material | |
| G1 X-20.360 Y5.766 E1214.98962 ; support material | |
| G1 X-20.704 Y5.128 E1214.99989 ; support material | |
| G1 X-19.991 Y3.974 E1215.01911 ; support material | |
| G1 X-20.620 Y3.595 F7800.000 ; move to first support material point | |
| G1 X-20.620 Y2.295 E1215.03752 F600.000 ; support material | |
| G1 X-21.520 Y2.295 E1215.05027 ; support material | |
| G1 X-21.520 Y6.145 E1215.10480 ; support material | |
| G1 X-17.670 Y6.145 E1215.15933 ; support material | |
| G1 X-17.670 Y3.595 E1215.19545 ; support material | |
| G1 X-20.620 Y3.595 E1215.23723 ; support material | |
| M126 ; enable fan | |
| M73 P61 ; update progress | |
| G1 F2100.000 E1210.23723 ; retract | |
| G1 Z11.800 F7800.000 ; move to next layer (113) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z11.600 F7800.000 ; restore layer Z | |
| G1 E1215.23723 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1215.26600 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1216.05329 ; perimeter | |
| G1 X18.184 Y1.159 E1216.08206 ; perimeter | |
| G1 X-18.124 Y1.159 E1216.86806 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1216.92187 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1217.73421 ; perimeter | |
| G1 X18.763 Y1.738 E1217.78803 ; perimeter | |
| G1 X-18.703 Y1.738 E1218.59907 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1218.67793 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1219.51533 ; perimeter | |
| G1 X19.341 Y2.316 E1219.59419 ; perimeter | |
| G1 X-19.281 Y2.316 E1220.43028 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1220.49543 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1221.05690 ; perimeter | |
| G1 X19.820 Y2.795 E1221.12205 ; perimeter | |
| G1 X-19.760 Y2.795 E1221.68267 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1222.85920 F600.000 ; fill | |
| M73 P61 ; update progress | |
| G1 F2100.000 E1217.85920 ; retract | |
| G1 Z11.900 F7800.000 ; move to next layer (114) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.700 F7800.000 ; restore layer Z | |
| G1 E1222.85920 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1222.88796 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1223.67526 ; perimeter | |
| G1 X-18.184 Y-0.169 E1223.70402 ; perimeter | |
| G1 X18.124 Y-0.169 E1224.49002 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1224.54383 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1225.35618 ; perimeter | |
| G1 X-18.763 Y-0.748 E1225.40999 ; perimeter | |
| G1 X18.703 Y-0.748 E1226.22103 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1226.29989 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1227.13729 ; perimeter | |
| G1 X-19.341 Y-1.326 E1227.21615 ; perimeter | |
| G1 X19.281 Y-1.326 E1228.05224 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1228.11740 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1228.67886 ; perimeter | |
| G1 X-19.820 Y-1.805 E1228.74401 ; perimeter | |
| G1 X19.760 Y-1.805 E1229.30463 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1230.48116 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P61 ; update progress | |
| G1 F2100.000 E1225.48116 ; retract | |
| G1 Z12.000 F7800.000 ; move to next layer (115) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1230.48116 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1231.26845 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1231.29722 ; perimeter | |
| G1 X-18.184 Y1.159 E1232.08451 ; perimeter | |
| G1 X-18.184 Y-0.109 E1232.11198 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1232.92432 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1232.97814 ; perimeter | |
| G1 X-18.763 Y1.738 E1233.79048 ; perimeter | |
| G1 X-18.763 Y-0.688 E1233.84299 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1234.68039 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1234.75925 ; perimeter | |
| G1 X-19.341 Y2.316 E1235.59664 ; perimeter | |
| G1 X-19.341 Y-1.266 E1235.67420 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1236.23567 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1236.30082 ; perimeter | |
| G1 X-19.820 Y2.795 E1236.86228 ; perimeter | |
| G1 X-19.820 Y-1.745 E1236.92659 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1238.10312 F600.000 ; fill | |
| M73 P62 ; update progress | |
| G1 F2100.000 E1233.10312 ; retract | |
| G1 Z12.000 F7800.000 ; move to next layer (39) and lift | |
| G1 X20.845 Y2.275 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1238.10312 F2100.000 ; compensate retraction | |
| G1 X20.600 Y2.297 E1238.11450 F600.000 ; support material interface | |
| G1 X20.600 Y2.710 E1238.13357 ; support material interface | |
| G1 X21.540 Y2.626 E1238.17716 ; support material interface | |
| G1 X21.540 Y3.039 E1238.19623 ; support material interface | |
| G1 X20.600 Y3.123 E1238.23982 ; support material interface | |
| G1 X20.600 Y3.536 E1238.25889 ; support material interface | |
| G1 X21.540 Y3.452 E1238.30248 ; support material interface | |
| G1 X21.540 Y3.865 E1238.32155 ; support material interface | |
| G1 X16.510 Y4.312 E1238.55476 ; support material interface | |
| G1 X16.510 Y4.725 E1238.57383 ; support material interface | |
| G1 X21.540 Y4.278 E1238.80704 ; support material interface | |
| G1 X21.540 Y4.691 E1238.82611 ; support material interface | |
| G1 X16.510 Y5.138 E1239.05932 ; support material interface | |
| G1 X16.510 Y5.551 E1239.07839 ; support material interface | |
| G1 X21.540 Y5.104 E1239.31159 ; support material interface | |
| G1 X21.540 Y5.517 E1239.33067 ; support material interface | |
| G1 X16.510 Y5.964 E1239.56387 ; support material interface | |
| G1 X16.639 Y6.365 E1239.58335 ; support material interface | |
| G1 X21.540 Y5.930 E1239.81056 ; support material interface | |
| G1 X21.295 Y6.365 E1239.83362 ; support material interface | |
| G1 X21.540 Y6.343 E1239.84500 ; support material interface | |
| G1 X20.158 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X16.510 Y3.899 E1240.01413 F600.000 ; support material interface | |
| G1 F2100.000 E1235.01413 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X12.550 Y6.343 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1240.01413 F2100.000 ; compensate retraction | |
| G1 X12.305 Y6.365 E1240.02460 F600.000 ; support material interface | |
| G1 X12.550 Y5.963 E1240.04464 ; support material interface | |
| G1 X8.018 Y6.365 E1240.23811 ; support material interface | |
| G1 X8.065 Y5.981 E1240.25459 ; support material interface | |
| G1 X12.550 Y5.583 E1240.44605 ; support material interface | |
| G1 X12.550 Y5.202 E1240.46222 ; support material interface | |
| G1 X8.257 Y5.583 E1240.64551 ; support material interface | |
| G1 X8.448 Y5.186 E1240.66426 ; support material interface | |
| G1 X12.550 Y4.822 E1240.83938 ; support material interface | |
| G1 X12.550 Y4.442 E1240.85555 ; support material interface | |
| G1 X8.639 Y4.789 E1241.02251 ; support material interface | |
| G1 X8.831 Y4.392 E1241.04126 ; support material interface | |
| G1 X12.550 Y4.062 E1241.20005 ; support material interface | |
| G1 X12.538 Y3.682 E1241.21618 ; support material interface | |
| G1 X9.022 Y3.994 E1241.36627 ; support material interface | |
| G1 X9.213 Y3.597 E1241.38503 ; support material interface | |
| G1 X9.462 Y3.575 E1241.39564 ; support material interface | |
| G1 F2100.000 E1236.39564 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X8.787 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1241.39564 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.215 E1242.69349 F600.000 ; support material interface | |
| G1 X-21.540 Y11.597 E1242.70974 ; support material interface | |
| G1 X13.084 Y8.525 E1244.19149 ; support material interface | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.978 E1245.85715 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1245.87340 ; support material interface | |
| G1 X21.520 Y8.539 E1247.71616 ; support material interface | |
| G1 X21.540 Y8.918 E1247.73236 ; support material interface | |
| G1 X-21.540 Y12.740 E1249.57599 ; support material interface | |
| G1 X-21.540 Y13.122 E1249.59224 ; support material interface | |
| G1 X21.540 Y9.300 E1251.43588 ; support material interface | |
| G1 X21.540 Y9.681 E1251.45213 ; support material interface | |
| G1 X-21.520 Y13.501 E1253.29489 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1254.96055 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1254.97680 ; support material interface | |
| G1 X-13.084 Y13.515 E1256.45855 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1257.75640 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1257.77265 ; support material interface | |
| G1 X-4.489 Y13.515 E1258.88659 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1259.81663 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1259.83288 ; support material interface | |
| G1 X4.105 Y13.515 E1260.57901 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1261.14123 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1261.15748 ; support material interface | |
| G1 X12.700 Y13.515 E1261.53580 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1261.73021 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1261.75033 ; support material interface | |
| G1 X21.540 Y13.493 E1261.76083 ; support material interface | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y10.834 E1262.87477 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1262.89102 ; support material interface | |
| G1 X2.371 Y8.332 E1263.91432 ; support material interface | |
| G1 X2.563 Y7.933 E1263.93316 ; support material interface | |
| G1 X-21.540 Y10.072 E1264.96467 ; support material interface | |
| G1 X-21.540 Y9.690 E1264.98092 ; support material interface | |
| G1 X-8.403 Y8.525 E1265.54315 ; support material interface | |
| G1 F2100.000 E1260.54315 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X-8.146 Y6.343 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1265.54315 F2100.000 ; compensate retraction | |
| G1 X-8.392 Y6.365 E1265.55424 F600.000 ; support material interface | |
| G1 X-8.146 Y5.941 E1265.57631 ; support material interface | |
| G1 X-12.930 Y6.365 E1265.79248 ; support material interface | |
| G1 X-13.490 Y6.012 E1265.82228 ; support material interface | |
| G1 X-8.146 Y5.538 E1266.06377 ; support material interface | |
| G1 X-8.146 Y5.136 E1266.08189 ; support material interface | |
| G1 X-13.490 Y5.610 E1266.32338 ; support material interface | |
| G1 X-13.490 Y5.207 E1266.34150 ; support material interface | |
| G1 X-8.146 Y4.733 E1266.58299 ; support material interface | |
| G1 X-8.146 Y4.330 E1266.60111 ; support material interface | |
| G1 X-13.490 Y4.804 E1266.84260 ; support material interface | |
| G1 X-13.490 Y4.402 E1266.86073 ; support material interface | |
| G1 X-8.146 Y3.928 E1267.10221 ; support material interface | |
| G1 X-8.707 Y3.575 E1267.13202 ; support material interface | |
| G1 X-13.490 Y3.999 E1267.34819 ; support material interface | |
| G1 X-13.490 Y3.597 E1267.36631 ; support material interface | |
| G1 X-13.245 Y3.575 E1267.37740 ; support material interface | |
| G1 F2100.000 E1262.37740 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X-12.700 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1267.37740 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y9.309 E1267.75572 F600.000 ; support material interface | |
| G1 X-21.540 Y8.928 E1267.77197 ; support material interface | |
| G1 X-16.997 Y8.525 E1267.96638 ; support material interface | |
| G1 F2100.000 E1262.96638 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X-17.450 Y6.343 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1267.96638 F2100.000 ; compensate retraction | |
| G1 X-17.695 Y6.365 E1267.97743 F600.000 ; support material interface | |
| G1 X-17.450 Y5.942 E1267.99933 ; support material interface | |
| G1 X-21.524 Y6.304 E1268.18265 ; support material interface | |
| G1 X-21.540 Y5.904 E1268.20057 ; support material interface | |
| G1 X-17.450 Y5.542 E1268.38462 ; support material interface | |
| G1 X-17.450 Y5.141 E1268.40259 ; support material interface | |
| G1 X-21.540 Y5.504 E1268.58664 ; support material interface | |
| G1 X-21.540 Y5.103 E1268.60461 ; support material interface | |
| G1 X-17.450 Y4.740 E1268.78866 ; support material interface | |
| G1 X-17.450 Y4.339 E1268.80663 ; support material interface | |
| G1 X-21.540 Y4.702 E1268.99068 ; support material interface | |
| G1 X-21.540 Y4.301 E1269.00865 ; support material interface | |
| G1 X-17.450 Y3.938 E1269.19270 ; support material interface | |
| G1 X-17.874 Y3.575 E1269.21773 ; support material interface | |
| G1 X-21.540 Y3.900 E1269.38269 ; support material interface | |
| G1 X-21.540 Y3.499 E1269.40066 ; support material interface | |
| G1 X-20.600 Y3.416 E1269.44297 ; support material interface | |
| G1 X-20.600 Y3.015 E1269.46094 ; support material interface | |
| G1 X-21.540 Y3.098 E1269.50324 ; support material interface | |
| G1 X-21.540 Y2.698 E1269.52121 ; support material interface | |
| G1 X-20.600 Y2.614 E1269.56352 ; support material interface | |
| G1 X-21.295 Y2.275 E1269.59817 ; support material interface | |
| G1 X-21.540 Y2.297 E1269.60922 ; support material interface | |
| G1 F2100.000 E1264.60922 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1269.60922 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1269.61972 F600.000 ; support material interface | |
| G1 F2100.000 E1264.61972 ; retract | |
| G1 Z12.000 F7800.000 ; lift plate during travel | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 Z11.800 F7800.000 ; restore layer Z | |
| G1 E1269.61972 F2100.000 ; compensate retraction | |
| G1 X0.090 Y7.771 E1269.84995 F600.000 ; support material interface | |
| G1 X-4.208 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X-5.290 Y7.868 E1269.89628 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P62 ; update progress | |
| G1 F2100.000 E1264.89628 ; retract | |
| G1 Z12.100 F7800.000 ; move to next layer (116) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z11.900 F7800.000 ; restore layer Z | |
| G1 E1269.89628 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1269.92504 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1270.71234 ; perimeter | |
| G1 X18.184 Y1.159 E1270.74110 ; perimeter | |
| G1 X-18.124 Y1.159 E1271.52710 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1271.58092 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1272.39326 ; perimeter | |
| G1 X18.763 Y1.738 E1272.44707 ; perimeter | |
| G1 X-18.703 Y1.738 E1273.25812 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1273.33698 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1274.17437 ; perimeter | |
| G1 X19.341 Y2.316 E1274.25323 ; perimeter | |
| G1 X-19.281 Y2.316 E1275.08932 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1275.15448 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1275.71594 ; perimeter | |
| G1 X19.820 Y2.795 E1275.78110 ; perimeter | |
| G1 X-19.760 Y2.795 E1276.34171 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1277.51824 F600.000 ; fill | |
| M73 P63 ; update progress | |
| G1 F2100.000 E1272.51824 ; retract | |
| G1 Z12.200 F7800.000 ; move to next layer (117) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.000 F7800.000 ; restore layer Z | |
| G1 E1277.51824 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1277.54700 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1278.33430 ; perimeter | |
| G1 X-18.184 Y-0.169 E1278.36307 ; perimeter | |
| G1 X18.124 Y-0.169 E1279.14906 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1279.20288 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1280.01522 ; perimeter | |
| G1 X-18.763 Y-0.748 E1280.06903 ; perimeter | |
| G1 X18.703 Y-0.748 E1280.88008 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1280.95894 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1281.79633 ; perimeter | |
| G1 X-19.341 Y-1.326 E1281.87519 ; perimeter | |
| G1 X19.281 Y-1.326 E1282.71129 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1282.77644 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1283.33790 ; perimeter | |
| G1 X-19.820 Y-1.805 E1283.40306 ; perimeter | |
| G1 X19.760 Y-1.805 E1283.96367 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1285.14020 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P63 ; update progress | |
| G1 F2100.000 E1280.14020 ; retract | |
| G1 Z12.300 F7800.000 ; move to next layer (118) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1285.14020 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1285.92750 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1285.95626 ; perimeter | |
| G1 X-18.184 Y1.159 E1286.74356 ; perimeter | |
| G1 X-18.184 Y-0.109 E1286.77102 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1287.58337 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1287.63718 ; perimeter | |
| G1 X-18.763 Y1.738 E1288.44953 ; perimeter | |
| G1 X-18.763 Y-0.688 E1288.50204 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1289.33943 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1289.41829 ; perimeter | |
| G1 X-19.341 Y2.316 E1290.25569 ; perimeter | |
| G1 X-19.341 Y-1.266 E1290.33325 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1290.89471 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1290.95987 ; perimeter | |
| G1 X-19.820 Y2.795 E1291.52133 ; perimeter | |
| G1 X-19.820 Y-1.745 E1291.58563 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1292.76216 F600.000 ; fill | |
| M73 P63 ; update progress | |
| G1 F2100.000 E1287.76216 ; retract | |
| G1 Z12.300 F7800.000 ; move to next layer (40) and lift | |
| G1 X20.600 Y2.297 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1292.76216 F2100.000 ; compensate retraction | |
| G1 X20.845 Y2.275 E1292.77301 F600.000 ; support material interface | |
| G1 X21.540 Y2.607 E1292.80690 ; support material interface | |
| G1 X20.600 Y2.690 E1292.84844 ; support material interface | |
| G1 X20.600 Y3.084 E1292.86577 ; support material interface | |
| G1 X21.540 Y3.001 E1292.90732 ; support material interface | |
| G1 X21.540 Y3.394 E1292.92464 ; support material interface | |
| G1 X20.600 Y3.478 E1292.96619 ; support material interface | |
| G1 X19.503 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X16.310 Y3.858 E1293.10729 F600.000 ; support material interface | |
| G1 X16.310 Y4.252 E1293.12461 ; support material interface | |
| G1 X21.540 Y3.788 E1293.35572 ; support material interface | |
| G1 X21.540 Y4.181 E1293.37305 ; support material interface | |
| G1 X16.310 Y4.645 E1293.60416 ; support material interface | |
| G1 X16.310 Y5.039 E1293.62148 ; support material interface | |
| G1 X21.540 Y4.575 E1293.85259 ; support material interface | |
| G1 X21.540 Y4.969 E1293.86992 ; support material interface | |
| G1 X16.310 Y5.433 E1294.10103 ; support material interface | |
| G1 X16.310 Y5.826 E1294.11836 ; support material interface | |
| G1 X21.540 Y5.362 E1294.34946 ; support material interface | |
| G1 X21.540 Y5.756 E1294.36679 ; support material interface | |
| G1 X16.310 Y6.220 E1294.59790 ; support material interface | |
| G1 X16.858 Y6.565 E1294.62639 ; support material interface | |
| G1 X21.540 Y6.150 E1294.83330 ; support material interface | |
| G1 X21.295 Y6.565 E1294.85454 ; support material interface | |
| G1 X21.540 Y6.543 E1294.86538 ; support material interface | |
| G1 F2100.000 E1289.86538 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1294.86538 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.978 E1296.53104 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1296.54729 ; support material interface | |
| G1 X21.520 Y8.539 E1298.39005 ; support material interface | |
| G1 X21.540 Y8.918 E1298.40625 ; support material interface | |
| G1 X-21.540 Y12.740 E1300.24989 ; support material interface | |
| G1 X-21.540 Y13.122 E1300.26614 ; support material interface | |
| G1 X21.540 Y9.300 E1302.10977 ; support material interface | |
| G1 X21.540 Y9.681 E1302.12603 ; support material interface | |
| G1 X-21.520 Y13.501 E1303.96878 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1305.63444 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1305.65069 ; support material interface | |
| G1 X-13.084 Y13.515 E1307.13245 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1308.43030 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1308.44655 ; support material interface | |
| G1 X-4.489 Y13.515 E1309.56049 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1310.49052 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1310.50677 ; support material interface | |
| G1 X4.105 Y13.515 E1311.25290 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1311.81513 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1311.83138 ; support material interface | |
| G1 X12.700 Y13.515 E1312.20969 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1312.40410 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1312.42422 ; support material interface | |
| G1 X21.540 Y13.493 E1312.43472 ; support material interface | |
| G1 X13.084 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.597 E1313.91648 F600.000 ; support material interface | |
| G1 X-21.540 Y11.215 E1313.93273 ; support material interface | |
| G1 X8.787 Y8.525 E1315.23058 ; support material interface | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y10.834 E1316.34452 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1316.36077 ; support material interface | |
| G1 X2.371 Y8.332 E1317.38407 ; support material interface | |
| G1 X2.563 Y7.933 E1317.40291 ; support material interface | |
| G1 X-21.540 Y10.072 E1318.43442 ; support material interface | |
| G1 X-21.540 Y9.690 E1318.45067 ; support material interface | |
| G1 X-8.403 Y8.525 E1319.01289 ; support material interface | |
| G1 X-8.146 Y6.543 F7800.000 ; move to first support material interface point | |
| G1 X-8.392 Y6.565 E1319.02342 F600.000 ; support material interface | |
| G1 X-8.146 Y6.161 E1319.04360 ; support material interface | |
| G1 X-12.698 Y6.565 E1319.23882 ; support material interface | |
| G1 X-13.690 Y6.271 F7800.000 ; move to first support material interface point | |
| G1 X-8.146 Y5.779 E1319.47657 F600.000 ; support material interface | |
| G1 X-8.146 Y5.397 E1319.49289 ; support material interface | |
| G1 X-13.690 Y5.889 E1319.73063 ; support material interface | |
| G1 X-13.690 Y5.507 E1319.74695 ; support material interface | |
| G1 X-8.146 Y5.015 E1319.98470 ; support material interface | |
| G1 X-8.146 Y4.633 E1320.00102 ; support material interface | |
| G1 X-13.690 Y5.125 E1320.23876 ; support material interface | |
| G1 X-13.690 Y4.743 E1320.25509 ; support material interface | |
| G1 X-8.146 Y4.251 E1320.49283 ; support material interface | |
| G1 X-8.231 Y3.876 E1320.50924 ; support material interface | |
| G1 X-13.690 Y4.361 E1320.74334 ; support material interface | |
| G1 X-13.690 Y3.979 E1320.75967 ; support material interface | |
| G1 X-9.138 Y3.575 E1320.95488 ; support material interface | |
| G1 X-13.445 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X-13.690 Y3.597 E1320.96541 F600.000 ; support material interface | |
| G1 F2100.000 E1315.96541 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X-17.250 Y6.543 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1320.96541 F2100.000 ; compensate retraction | |
| G1 X-17.495 Y6.565 E1320.97603 F600.000 ; support material interface | |
| G1 X-17.250 Y6.158 E1320.99654 ; support material interface | |
| G1 X-21.521 Y6.537 E1321.18141 ; support material interface | |
| G1 X-21.540 Y6.153 E1321.19798 ; support material interface | |
| G1 X-17.250 Y5.772 E1321.38368 ; support material interface | |
| G1 X-17.250 Y5.387 E1321.40031 ; support material interface | |
| G1 X-21.540 Y5.767 E1321.58601 ; support material interface | |
| G1 X-21.540 Y5.382 E1321.60263 ; support material interface | |
| G1 X-17.250 Y5.001 E1321.78834 ; support material interface | |
| G1 X-17.250 Y4.615 E1321.80496 ; support material interface | |
| G1 X-21.540 Y4.996 E1321.99067 ; support material interface | |
| G1 X-21.540 Y4.610 E1322.00729 ; support material interface | |
| G1 X-17.250 Y4.230 E1322.19299 ; support material interface | |
| G1 X-17.250 Y3.844 E1322.20962 ; support material interface | |
| G1 X-21.540 Y4.225 E1322.39532 ; support material interface | |
| G1 X-21.540 Y3.839 E1322.41195 ; support material interface | |
| G1 X-18.562 Y3.575 E1322.54085 ; support material interface | |
| G1 F2100.000 E1317.54085 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X-20.600 Y3.370 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1322.54085 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.453 E1322.58155 F600.000 ; support material interface | |
| G1 X-21.540 Y3.068 E1322.59817 ; support material interface | |
| G1 X-20.600 Y2.984 E1322.63887 ; support material interface | |
| G1 X-20.600 Y2.599 E1322.65550 ; support material interface | |
| G1 X-21.540 Y2.682 E1322.69619 ; support material interface | |
| G1 X-21.540 Y2.297 E1322.71282 ; support material interface | |
| G1 X-21.295 Y2.275 E1322.72344 ; support material interface | |
| G1 F2100.000 E1317.72344 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1322.72344 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1322.73395 F600.000 ; support material interface | |
| G1 X-16.997 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.928 E1322.92836 F600.000 ; support material interface | |
| G1 X-21.540 Y9.309 E1322.94461 ; support material interface | |
| G1 X-12.700 Y8.525 E1323.32292 ; support material interface | |
| G1 F2100.000 E1318.32292 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1323.32292 F2100.000 ; compensate retraction | |
| G1 X0.090 Y7.771 E1323.55316 F600.000 ; support material interface | |
| G1 X-4.208 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X-5.290 Y7.868 E1323.59948 F600.000 ; support material interface | |
| G1 F2100.000 E1318.59948 ; retract | |
| G1 Z12.300 F7800.000 ; lift plate during travel | |
| G1 X9.462 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z12.100 F7800.000 ; restore layer Z | |
| G1 E1323.59948 F2100.000 ; compensate retraction | |
| G1 X9.213 Y3.597 E1323.61086 F600.000 ; support material interface | |
| G1 X9.008 Y4.023 E1323.63239 ; support material interface | |
| G1 X12.739 Y3.692 E1323.80304 ; support material interface | |
| G1 X12.750 Y4.098 E1323.82157 ; support material interface | |
| G1 X8.803 Y4.448 E1324.00212 ; support material interface | |
| G1 X8.598 Y4.874 E1324.02365 ; support material interface | |
| G1 X12.750 Y4.506 E1324.21358 ; support material interface | |
| G1 X12.750 Y4.913 E1324.23215 ; support material interface | |
| G1 X8.393 Y5.300 E1324.43146 ; support material interface | |
| G1 X8.188 Y5.725 E1324.45299 ; support material interface | |
| G1 X12.750 Y5.321 E1324.66169 ; support material interface | |
| G1 X12.750 Y5.728 E1324.68025 ; support material interface | |
| G1 X7.983 Y6.151 E1324.89832 ; support material interface | |
| G1 X7.911 Y6.565 E1324.91747 ; support material interface | |
| G1 X12.750 Y6.136 E1325.13882 ; support material interface | |
| G1 X12.505 Y6.565 E1325.16136 ; support material interface | |
| G1 X12.750 Y6.543 E1325.17259 ; support material interface | |
| M126 ; enable fan | |
| M73 P64 ; update progress | |
| G1 F2100.000 E1320.17259 ; retract | |
| G1 Z12.400 F7800.000 ; move to next layer (119) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z12.200 F7800.000 ; restore layer Z | |
| G1 E1325.17259 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E1325.95988 F1759.784 ; perimeter | |
| G1 X-18.184 Y-0.169 E1325.98865 ; perimeter | |
| G1 X18.184 Y-0.169 E1326.77594 ; perimeter | |
| G1 X18.184 Y1.099 E1326.80341 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E1327.61575 F1759.784 ; perimeter | |
| G1 X-18.763 Y-0.748 E1327.66957 ; perimeter | |
| G1 X18.763 Y-0.748 E1328.48191 ; perimeter | |
| G1 X18.763 Y1.678 E1328.53442 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E1329.37182 F1759.784 ; perimeter | |
| G1 X-19.341 Y-1.326 E1329.45068 ; perimeter | |
| G1 X19.341 Y-1.326 E1330.28807 ; perimeter | |
| G1 X19.341 Y2.256 E1330.36563 ; perimeter | |
| G1 X19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E1330.92710 F600.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E1330.99225 ; perimeter | |
| G1 X19.820 Y-1.805 E1331.55371 ; perimeter | |
| G1 X19.820 Y2.735 E1331.61802 ; perimeter | |
| G1 X19.474 Y2.595 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1332.79455 F600.000 ; fill | |
| M73 P64 ; update progress | |
| G1 F2100.000 E1327.79455 ; retract | |
| G1 Z12.500 F7800.000 ; move to next layer (120) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.300 F7800.000 ; restore layer Z | |
| G1 E1332.79455 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1333.58184 F1759.784 ; perimeter | |
| G1 X18.184 Y1.159 E1333.61061 ; perimeter | |
| G1 X-18.184 Y1.159 E1334.39790 ; perimeter | |
| G1 X-18.184 Y-0.109 E1334.42537 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1335.23771 F1759.784 ; perimeter | |
| G1 X18.763 Y1.738 E1335.29153 ; perimeter | |
| G1 X-18.763 Y1.738 E1336.10387 ; perimeter | |
| G1 X-18.763 Y-0.688 E1336.15639 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1336.99378 F1759.784 ; perimeter | |
| G1 X19.341 Y2.316 E1337.07264 ; perimeter | |
| G1 X-19.341 Y2.316 E1337.91003 ; perimeter | |
| G1 X-19.341 Y-1.266 E1337.98759 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1338.54906 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E1338.61421 ; perimeter | |
| G1 X-19.820 Y2.795 E1339.17567 ; perimeter | |
| G1 X-19.820 Y-1.745 E1339.23998 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1340.41651 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P65 ; update progress | |
| G1 F2100.000 E1335.41651 ; retract | |
| G1 Z12.600 F7800.000 ; move to next layer (121) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1340.41651 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1340.44527 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E1341.23257 ; perimeter | |
| G1 X-18.184 Y-0.169 E1341.26133 ; perimeter | |
| G1 X18.124 Y-0.169 E1342.04733 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1342.10114 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E1342.91349 ; perimeter | |
| G1 X-18.763 Y-0.748 E1342.96730 ; perimeter | |
| G1 X18.703 Y-0.748 E1343.77835 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1343.85721 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E1344.69460 ; perimeter | |
| G1 X-19.341 Y-1.326 E1344.77346 ; perimeter | |
| G1 X19.281 Y-1.326 E1345.60955 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1345.67471 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1346.23617 ; perimeter | |
| G1 X-19.820 Y-1.805 E1346.30133 ; perimeter | |
| G1 X19.760 Y-1.805 E1346.86194 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1348.03847 F600.000 ; fill | |
| M73 P65 ; update progress | |
| G1 F2100.000 E1343.03847 ; retract | |
| G1 Z12.600 F7800.000 ; move to next layer (41) and lift | |
| G1 X-17.744 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1348.03847 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.912 E1348.21052 F600.000 ; support material interface | |
| G1 X-21.540 Y4.315 E1348.22874 ; support material interface | |
| G1 X-17.050 Y3.917 E1348.43225 ; support material interface | |
| G1 X-17.050 Y4.321 E1348.45048 ; support material interface | |
| G1 X-21.540 Y4.719 E1348.65398 ; support material interface | |
| G1 X-21.540 Y5.123 E1348.67221 ; support material interface | |
| G1 X-17.050 Y4.725 E1348.87572 ; support material interface | |
| G1 X-17.050 Y5.128 E1348.89394 ; support material interface | |
| G1 X-21.540 Y5.527 E1349.09745 ; support material interface | |
| G1 X-21.540 Y5.930 E1349.11568 ; support material interface | |
| G1 X-17.050 Y5.532 E1349.31918 ; support material interface | |
| G1 X-17.050 Y5.936 E1349.33741 ; support material interface | |
| G1 X-21.540 Y6.334 E1349.54091 ; support material interface | |
| G1 X-21.521 Y6.736 E1349.55909 ; support material interface | |
| G1 X-17.050 Y6.340 E1349.76172 ; support material interface | |
| G1 X-17.295 Y6.765 E1349.78390 ; support material interface | |
| G1 X-17.050 Y6.743 E1349.79502 ; support material interface | |
| G1 X-16.997 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.928 E1349.98943 F600.000 ; support material interface | |
| G1 X-21.540 Y9.309 E1350.00568 ; support material interface | |
| G1 X-12.700 Y8.525 E1350.38400 ; support material interface | |
| G1 X-12.971 Y6.765 F7800.000 ; move to first support material interface point | |
| G1 X-8.146 Y6.337 E1350.60401 F600.000 ; support material interface | |
| G1 X-8.392 Y6.765 E1350.62642 ; support material interface | |
| G1 X-8.146 Y6.743 E1350.63762 ; support material interface | |
| G1 X-8.403 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y9.690 E1351.19984 F600.000 ; support material interface | |
| G1 X-21.540 Y10.072 E1351.21609 ; support material interface | |
| G1 X2.563 Y7.933 E1352.24760 ; support material interface | |
| G1 X2.371 Y8.332 E1352.26644 ; support material interface | |
| G1 X-21.540 Y10.453 E1353.28974 ; support material interface | |
| G1 X-21.540 Y10.834 E1353.30599 ; support material interface | |
| G1 X4.489 Y8.525 E1354.41993 ; support material interface | |
| G1 X8.787 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.215 E1355.71778 F600.000 ; support material interface | |
| G1 X-21.540 Y11.597 E1355.73403 ; support material interface | |
| G1 X13.084 Y8.525 E1357.21578 ; support material interface | |
| G1 X12.950 Y6.743 F7800.000 ; move to first support material interface point | |
| G1 X12.705 Y6.765 E1357.22643 F600.000 ; support material interface | |
| G1 X12.950 Y6.357 E1357.24701 ; support material interface | |
| G1 X8.349 Y6.765 E1357.44661 ; support material interface | |
| G1 X7.852 Y6.423 E1357.47267 ; support material interface | |
| G1 X12.950 Y5.970 E1357.69380 ; support material interface | |
| G1 X12.950 Y5.584 E1357.71050 ; support material interface | |
| G1 X8.047 Y6.019 E1357.92320 ; support material interface | |
| G1 X8.241 Y5.615 E1357.94256 ; support material interface | |
| G1 X12.950 Y5.198 E1358.14683 ; support material interface | |
| G1 X12.950 Y4.811 E1358.16352 ; support material interface | |
| G1 X8.436 Y5.212 E1358.35936 ; support material interface | |
| G1 X8.630 Y4.808 E1358.37872 ; support material interface | |
| G1 X12.950 Y4.425 E1358.56612 ; support material interface | |
| G1 X12.950 Y4.038 E1358.58281 ; support material interface | |
| G1 X8.824 Y4.404 E1358.76178 ; support material interface | |
| G1 X9.019 Y4.001 E1358.78114 ; support material interface | |
| G1 X12.935 Y3.653 E1358.95103 ; support material interface | |
| G1 X9.462 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X9.213 Y3.597 E1358.96181 F600.000 ; support material interface | |
| G1 F2100.000 E1353.96181 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1358.96181 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.978 E1360.62747 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1360.64373 ; support material interface | |
| G1 X21.520 Y8.539 E1362.48648 ; support material interface | |
| G1 X21.540 Y8.918 E1362.50268 ; support material interface | |
| G1 X-21.540 Y12.740 E1364.34632 ; support material interface | |
| G1 X-21.540 Y13.122 E1364.36257 ; support material interface | |
| G1 X21.540 Y9.300 E1366.20620 ; support material interface | |
| G1 X21.540 Y9.681 E1366.22246 ; support material interface | |
| G1 X-21.520 Y13.501 E1368.06521 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1369.73087 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1369.74712 ; support material interface | |
| G1 X-13.084 Y13.515 E1371.22888 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1372.52673 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1372.54298 ; support material interface | |
| G1 X-4.489 Y13.515 E1373.65692 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1374.58695 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1374.60320 ; support material interface | |
| G1 X4.105 Y13.515 E1375.34933 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1375.91156 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1375.92781 ; support material interface | |
| G1 X12.700 Y13.515 E1376.30612 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1376.50053 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1376.52065 ; support material interface | |
| G1 X21.540 Y13.493 E1376.53115 ; support material interface | |
| G1 F2100.000 E1371.53115 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X21.540 Y6.743 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1376.53115 F2100.000 ; compensate retraction | |
| G1 X21.295 Y6.765 E1376.54250 F600.000 ; support material interface | |
| G1 X21.540 Y6.332 E1376.56544 ; support material interface | |
| G1 X16.653 Y6.765 E1376.79139 ; support material interface | |
| G1 X16.110 Y6.401 E1376.82147 ; support material interface | |
| G1 X21.540 Y5.920 E1377.07250 ; support material interface | |
| G1 X21.540 Y5.508 E1377.09146 ; support material interface | |
| G1 X16.110 Y5.990 E1377.34249 ; support material interface | |
| G1 X16.110 Y5.578 E1377.36145 ; support material interface | |
| G1 X21.540 Y5.096 E1377.61248 ; support material interface | |
| G1 X21.540 Y4.684 E1377.63145 ; support material interface | |
| G1 X16.110 Y5.166 E1377.88248 ; support material interface | |
| G1 X16.110 Y4.754 E1377.90144 ; support material interface | |
| G1 X21.540 Y4.272 E1378.15247 ; support material interface | |
| G1 X21.540 Y3.861 E1378.17143 ; support material interface | |
| G1 X16.110 Y4.342 E1378.42246 ; support material interface | |
| G1 X16.110 Y3.930 E1378.44143 ; support material interface | |
| G1 X21.540 Y3.449 E1378.69246 ; support material interface | |
| G1 X21.540 Y3.037 E1378.71142 ; support material interface | |
| G1 X20.600 Y3.120 E1378.75488 ; support material interface | |
| G1 X20.600 Y2.708 E1378.77385 ; support material interface | |
| G1 X21.540 Y2.625 E1378.81731 ; support material interface | |
| G1 X20.845 Y2.275 E1378.85314 ; support material interface | |
| G1 X20.600 Y2.297 E1378.86448 ; support material interface | |
| G1 F2100.000 E1373.86448 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X0.090 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1378.86448 F2100.000 ; compensate retraction | |
| G1 X-5.290 Y8.249 E1379.09472 F600.000 ; support material interface | |
| G1 X-5.290 Y7.868 F7800.000 ; move to first support material interface point | |
| G1 X-4.208 Y7.771 E1379.14104 F600.000 ; support material interface | |
| G1 F2100.000 E1374.14104 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X-9.065 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1379.14104 F2100.000 ; compensate retraction | |
| G1 X-13.890 Y4.003 E1379.36106 F600.000 ; support material interface | |
| G1 X-13.890 Y4.409 E1379.37951 ; support material interface | |
| G1 X-8.146 Y3.900 E1379.64143 ; support material interface | |
| G1 X-8.146 Y4.306 E1379.65988 ; support material interface | |
| G1 X-13.890 Y4.815 E1379.92180 ; support material interface | |
| G1 X-13.890 Y5.222 E1379.94026 ; support material interface | |
| G1 X-8.146 Y4.712 E1380.20218 ; support material interface | |
| G1 X-8.146 Y5.118 E1380.22063 ; support material interface | |
| G1 X-13.890 Y5.628 E1380.48255 ; support material interface | |
| G1 X-13.890 Y6.034 E1380.50101 ; support material interface | |
| G1 X-8.146 Y5.525 E1380.76293 ; support material interface | |
| G1 X-8.146 Y5.931 E1380.78138 ; support material interface | |
| G1 X-13.890 Y6.440 E1381.04330 ; support material interface | |
| G1 X-13.890 Y3.597 F7800.000 ; move to first support material interface point | |
| G1 X-13.645 Y3.575 E1381.05450 F600.000 ; support material interface | |
| G1 F2100.000 E1376.05450 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X-20.600 Y3.425 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1381.05450 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.508 E1381.09711 F600.000 ; support material interface | |
| G1 X-21.540 Y3.104 E1381.11534 ; support material interface | |
| G1 X-20.600 Y3.021 E1381.15795 ; support material interface | |
| G1 X-20.600 Y2.617 E1381.17617 ; support material interface | |
| G1 X-21.540 Y2.700 E1381.21879 ; support material interface | |
| G1 X-21.540 Y2.297 E1381.23701 ; support material interface | |
| G1 X-21.295 Y2.275 E1381.24814 ; support material interface | |
| G1 F2100.000 E1376.24814 ; retract | |
| G1 Z12.600 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z12.400 F7800.000 ; restore layer Z | |
| G1 E1381.24814 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1381.25864 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P66 ; update progress | |
| G1 F2100.000 E1376.25864 ; retract | |
| G1 Z12.700 F7800.000 ; move to next layer (122) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z12.500 F7800.000 ; restore layer Z | |
| G1 E1381.25864 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1381.28741 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1382.07470 ; perimeter | |
| G1 X18.184 Y1.159 E1382.10347 ; perimeter | |
| G1 X-18.124 Y1.159 E1382.88946 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1382.94328 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1383.75562 ; perimeter | |
| G1 X18.763 Y1.738 E1383.80943 ; perimeter | |
| G1 X-18.703 Y1.738 E1384.62048 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1384.69934 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1385.53673 ; perimeter | |
| G1 X19.341 Y2.316 E1385.61559 ; perimeter | |
| G1 X-19.281 Y2.316 E1386.45169 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1386.51684 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1387.07831 ; perimeter | |
| G1 X19.820 Y2.795 E1387.14346 ; perimeter | |
| G1 X-19.760 Y2.795 E1387.70407 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1388.88060 F600.000 ; fill | |
| M73 P66 ; update progress | |
| G1 F2100.000 E1383.88060 ; retract | |
| G1 Z12.800 F7800.000 ; move to next layer (123) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.600 F7800.000 ; restore layer Z | |
| G1 E1388.88060 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1388.90937 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1389.69666 ; perimeter | |
| G1 X-18.184 Y-0.169 E1389.72543 ; perimeter | |
| G1 X18.124 Y-0.169 E1390.51143 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1390.56524 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1391.37758 ; perimeter | |
| G1 X-18.763 Y-0.748 E1391.43140 ; perimeter | |
| G1 X18.703 Y-0.748 E1392.24244 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1392.32130 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1393.15869 ; perimeter | |
| G1 X-19.341 Y-1.326 E1393.23755 ; perimeter | |
| G1 X19.281 Y-1.326 E1394.07365 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1394.13880 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1394.70027 ; perimeter | |
| G1 X-19.820 Y-1.805 E1394.76542 ; perimeter | |
| G1 X19.760 Y-1.805 E1395.32604 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1396.50256 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P66 ; update progress | |
| G1 F2100.000 E1391.50256 ; retract | |
| G1 Z12.900 F7800.000 ; move to next layer (124) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1396.50256 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1397.28986 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1397.31862 ; perimeter | |
| G1 X-18.184 Y1.159 E1398.10592 ; perimeter | |
| G1 X-18.184 Y-0.109 E1398.13339 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1398.94573 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1398.99954 ; perimeter | |
| G1 X-18.763 Y1.738 E1399.81189 ; perimeter | |
| G1 X-18.763 Y-0.688 E1399.86440 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1400.70179 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1400.78066 ; perimeter | |
| G1 X-19.341 Y2.316 E1401.61805 ; perimeter | |
| G1 X-19.341 Y-1.266 E1401.69561 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1402.25707 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1402.32223 ; perimeter | |
| G1 X-19.820 Y2.795 E1402.88369 ; perimeter | |
| G1 X-19.820 Y-1.745 E1402.94800 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1404.12452 F600.000 ; fill | |
| M73 P67 ; update progress | |
| G1 F2100.000 E1399.12452 ; retract | |
| G1 Z12.900 F7800.000 ; move to next layer (42) and lift | |
| G1 X20.845 Y2.275 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1404.12452 F2100.000 ; compensate retraction | |
| G1 X20.600 Y2.297 E1404.13538 F600.000 ; support material interface | |
| G1 X20.600 Y2.691 E1404.15276 ; support material interface | |
| G1 X21.540 Y2.607 E1404.19436 ; support material interface | |
| G1 X21.540 Y3.002 E1404.21173 ; support material interface | |
| G1 X20.600 Y3.085 E1404.25333 ; support material interface | |
| G1 X20.600 Y3.479 E1404.27070 ; support material interface | |
| G1 X21.540 Y3.396 E1404.31231 ; support material interface | |
| G1 X21.540 Y3.790 E1404.32968 ; support material interface | |
| G1 X15.910 Y4.289 E1404.57880 ; support material interface | |
| G1 X15.910 Y4.684 E1404.59617 ; support material interface | |
| G1 X21.540 Y4.184 E1404.84529 ; support material interface | |
| G1 X21.540 Y4.578 E1404.86266 ; support material interface | |
| G1 X15.910 Y5.078 E1405.11178 ; support material interface | |
| G1 X15.910 Y5.472 E1405.12915 ; support material interface | |
| G1 X21.540 Y4.972 E1405.37827 ; support material interface | |
| G1 X21.540 Y5.367 E1405.39565 ; support material interface | |
| G1 X15.910 Y5.866 E1405.64477 ; support material interface | |
| G1 X15.910 Y6.260 E1405.66214 ; support material interface | |
| G1 X21.540 Y5.761 E1405.91126 ; support material interface | |
| G1 X21.540 Y6.155 E1405.92863 ; support material interface | |
| G1 X15.910 Y6.654 E1406.17775 ; support material interface | |
| G1 X16.852 Y6.965 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y6.549 E1406.38520 F600.000 ; support material interface | |
| G1 X21.295 Y6.965 E1406.40649 ; support material interface | |
| G1 X21.540 Y6.943 E1406.41735 ; support material interface | |
| G1 X19.521 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X15.910 Y3.895 E1406.57713 F600.000 ; support material interface | |
| G1 F2100.000 E1401.57713 ; retract | |
| G1 Z12.900 F7800.000 ; lift plate during travel | |
| G1 X13.136 Y3.660 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1406.57713 F2100.000 ; compensate retraction | |
| G1 X9.007 Y4.026 E1406.76746 F600.000 ; support material interface | |
| G1 X8.800 Y4.455 E1406.78932 ; support material interface | |
| G1 X13.150 Y4.069 E1406.98983 ; support material interface | |
| G1 X13.150 Y4.480 E1407.00869 ; support material interface | |
| G1 X8.593 Y4.884 E1407.21872 ; support material interface | |
| G1 X8.387 Y5.313 E1407.24058 ; support material interface | |
| G1 X13.150 Y4.890 E1407.46014 ; support material interface | |
| G1 X13.150 Y5.301 E1407.47899 ; support material interface | |
| G1 X8.180 Y5.742 E1407.70807 ; support material interface | |
| G1 X7.974 Y6.171 E1407.72993 ; support material interface | |
| G1 X13.150 Y5.711 E1407.96853 ; support material interface | |
| G1 X13.150 Y6.122 E1407.98739 ; support material interface | |
| G1 X7.767 Y6.600 E1408.23551 ; support material interface | |
| G1 X8.276 Y6.965 E1408.26429 ; support material interface | |
| G1 X13.150 Y6.533 E1408.48895 ; support material interface | |
| G1 X12.905 Y6.965 E1408.51178 ; support material interface | |
| G1 X13.150 Y6.943 E1408.52309 ; support material interface | |
| G1 X13.084 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.597 E1410.00484 F600.000 ; support material interface | |
| G1 X-21.540 Y11.215 E1410.02109 ; support material interface | |
| G1 X8.787 Y8.525 E1411.31894 ; support material interface | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y10.834 E1412.43288 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1412.44913 ; support material interface | |
| G1 X2.371 Y8.332 E1413.47243 ; support material interface | |
| G1 X2.563 Y7.933 E1413.49128 ; support material interface | |
| G1 X-21.540 Y10.072 E1414.52278 ; support material interface | |
| G1 X-21.540 Y9.690 E1414.53903 ; support material interface | |
| G1 X-8.403 Y8.525 E1415.10126 ; support material interface | |
| G1 X-8.146 Y6.943 F7800.000 ; move to first support material interface point | |
| G1 X-8.392 Y6.965 E1415.11193 F600.000 ; support material interface | |
| G1 X-8.146 Y6.556 E1415.13260 ; support material interface | |
| G1 X-12.759 Y6.965 E1415.33316 ; support material interface | |
| G1 X-14.090 Y6.696 F7800.000 ; move to first support material interface point | |
| G1 X-8.146 Y6.169 E1415.59163 F600.000 ; support material interface | |
| G1 X-8.146 Y5.781 E1415.60841 ; support material interface | |
| G1 X-14.090 Y6.308 E1415.86687 ; support material interface | |
| G1 X-14.090 Y5.921 E1415.88365 ; support material interface | |
| G1 X-8.146 Y5.394 E1416.14212 ; support material interface | |
| G1 X-8.146 Y5.006 E1416.15890 ; support material interface | |
| G1 X-14.090 Y5.534 E1416.41737 ; support material interface | |
| G1 X-14.090 Y5.146 E1416.43415 ; support material interface | |
| G1 X-8.146 Y4.619 E1416.69261 ; support material interface | |
| G1 X-8.146 Y4.232 E1416.70939 ; support material interface | |
| G1 X-14.090 Y4.759 E1416.96786 ; support material interface | |
| G1 X-14.090 Y4.371 E1416.98464 ; support material interface | |
| G1 X-8.259 Y3.854 E1417.23820 ; support material interface | |
| G1 X-9.478 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X-14.090 Y3.984 E1417.43876 F600.000 ; support material interface | |
| G1 X-14.090 Y3.597 E1417.45554 ; support material interface | |
| G1 X-13.845 Y3.575 E1417.46622 ; support material interface | |
| G1 F2100.000 E1412.46622 ; retract | |
| G1 Z12.900 F7800.000 ; lift plate during travel | |
| G1 X-16.850 Y3.828 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1417.46622 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y4.244 E1417.67125 F600.000 ; support material interface | |
| G1 X-21.540 Y4.633 E1417.68821 ; support material interface | |
| G1 X-16.850 Y4.217 E1417.89325 ; support material interface | |
| G1 X-16.850 Y4.607 E1417.91021 ; support material interface | |
| G1 X-21.540 Y5.023 E1418.11524 ; support material interface | |
| G1 X-21.540 Y5.412 E1418.13220 ; support material interface | |
| G1 X-16.850 Y4.996 E1418.33724 ; support material interface | |
| G1 X-16.850 Y5.386 E1418.35420 ; support material interface | |
| G1 X-21.540 Y5.802 E1418.55923 ; support material interface | |
| G1 X-21.540 Y6.191 E1418.57619 ; support material interface | |
| G1 X-16.850 Y5.775 E1418.78123 ; support material interface | |
| G1 X-16.850 Y6.164 E1418.79819 ; support material interface | |
| G1 X-21.540 Y6.581 E1419.00322 ; support material interface | |
| G1 X-21.485 Y6.965 E1419.02014 ; support material interface | |
| G1 X-16.850 Y6.554 E1419.22277 ; support material interface | |
| G1 X-17.095 Y6.965 E1419.24363 ; support material interface | |
| G1 X-16.850 Y6.943 E1419.25436 ; support material interface | |
| G1 X-16.997 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.928 E1419.44877 F600.000 ; support material interface | |
| G1 X-21.540 Y9.309 E1419.46502 ; support material interface | |
| G1 X-12.700 Y8.525 E1419.84333 ; support material interface | |
| G1 X-13.084 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.443 E1421.32509 F600.000 ; support material interface | |
| G1 X21.540 Y10.062 E1421.34134 ; support material interface | |
| G1 X-17.381 Y13.515 E1423.00700 ; support material interface | |
| G1 X-21.520 Y13.501 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y9.681 E1424.84976 F600.000 ; support material interface | |
| G1 X21.540 Y9.300 E1424.86601 ; support material interface | |
| G1 X-21.540 Y13.122 E1426.70965 ; support material interface | |
| G1 X-21.540 Y12.740 E1426.72590 ; support material interface | |
| G1 X21.540 Y8.918 E1428.56953 ; support material interface | |
| G1 X21.520 Y8.539 E1428.58573 ; support material interface | |
| G1 X-21.540 Y12.359 E1430.42849 ; support material interface | |
| G1 X-21.540 Y11.978 E1430.44474 ; support material interface | |
| G1 X17.381 Y8.525 E1432.11040 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1432.30481 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1432.32492 ; support material interface | |
| G1 X21.540 Y13.493 E1432.33543 ; support material interface | |
| G1 X12.700 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.731 E1432.71375 F600.000 ; support material interface | |
| G1 X21.540 Y12.350 E1432.73000 ; support material interface | |
| G1 X8.403 Y13.515 E1433.29222 ; support material interface | |
| G1 X4.105 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.968 E1434.03835 F600.000 ; support material interface | |
| G1 X21.540 Y11.587 E1434.05460 ; support material interface | |
| G1 X-0.192 Y13.515 E1434.98463 ; support material interface | |
| G1 X-4.489 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.206 E1436.09858 F600.000 ; support material interface | |
| G1 X21.540 Y10.825 E1436.11483 ; support material interface | |
| G1 X-8.787 Y13.515 E1437.41267 ; support material interface | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 X0.090 Y7.771 E1437.64291 F600.000 ; support material interface | |
| G1 X-4.208 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X-5.290 Y7.868 E1437.68923 F600.000 ; support material interface | |
| G1 F2100.000 E1432.68923 ; retract | |
| G1 Z12.900 F7800.000 ; lift plate during travel | |
| G1 X-18.389 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1437.68923 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.854 E1437.82698 F600.000 ; support material interface | |
| G1 X-21.540 Y3.465 E1437.84394 ; support material interface | |
| G1 X-20.600 Y3.382 E1437.88504 ; support material interface | |
| G1 X-20.600 Y2.992 E1437.90200 ; support material interface | |
| G1 X-21.540 Y3.076 E1437.94310 ; support material interface | |
| G1 X-21.540 Y2.686 E1437.96006 ; support material interface | |
| G1 X-20.600 Y2.603 E1438.00116 ; support material interface | |
| G1 X-21.295 Y2.275 E1438.03461 ; support material interface | |
| G1 X-21.540 Y2.297 E1438.04534 ; support material interface | |
| G1 F2100.000 E1433.04534 ; retract | |
| G1 Z12.900 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1438.04534 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1438.05585 F600.000 ; support material interface | |
| G1 F2100.000 E1433.05585 ; retract | |
| G1 Z12.900 F7800.000 ; lift plate during travel | |
| G1 X9.213 Y3.597 F7800.000 ; move to first support material interface point | |
| G1 Z12.700 F7800.000 ; restore layer Z | |
| G1 E1438.05585 F2100.000 ; compensate retraction | |
| G1 X9.462 Y3.575 E1438.06731 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P67 ; update progress | |
| G1 F2100.000 E1433.06731 ; retract | |
| G1 Z13.000 F7800.000 ; move to next layer (125) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z12.800 F7800.000 ; restore layer Z | |
| G1 E1438.06731 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E1438.85460 F1759.784 ; perimeter | |
| G1 X-18.184 Y-0.169 E1438.88337 ; perimeter | |
| G1 X18.184 Y-0.169 E1439.67066 ; perimeter | |
| G1 X18.184 Y1.099 E1439.69813 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E1440.51047 F1759.784 ; perimeter | |
| G1 X-18.763 Y-0.748 E1440.56429 ; perimeter | |
| G1 X18.763 Y-0.748 E1441.37663 ; perimeter | |
| G1 X18.763 Y1.678 E1441.42915 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E1442.26654 F1759.784 ; perimeter | |
| G1 X-19.341 Y-1.326 E1442.34540 ; perimeter | |
| G1 X19.341 Y-1.326 E1443.18279 ; perimeter | |
| G1 X19.341 Y2.256 E1443.26035 ; perimeter | |
| G1 X19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E1443.82182 F600.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E1443.88697 ; perimeter | |
| G1 X19.820 Y-1.805 E1444.44844 ; perimeter | |
| G1 X19.820 Y2.735 E1444.51274 ; perimeter | |
| G1 X19.474 Y2.595 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1445.68927 F600.000 ; fill | |
| M73 P68 ; update progress | |
| G1 F2100.000 E1440.68927 ; retract | |
| G1 Z13.100 F7800.000 ; move to next layer (126) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z12.900 F7800.000 ; restore layer Z | |
| G1 E1445.68927 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1446.47656 F1759.784 ; perimeter | |
| G1 X18.184 Y1.159 E1446.50533 ; perimeter | |
| G1 X-18.184 Y1.159 E1447.29263 ; perimeter | |
| G1 X-18.184 Y-0.109 E1447.32009 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1448.13244 F1759.784 ; perimeter | |
| G1 X18.763 Y1.738 E1448.18625 ; perimeter | |
| G1 X-18.763 Y1.738 E1448.99859 ; perimeter | |
| G1 X-18.763 Y-0.688 E1449.05111 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1449.88850 F1759.784 ; perimeter | |
| G1 X19.341 Y2.316 E1449.96736 ; perimeter | |
| G1 X-19.341 Y2.316 E1450.80475 ; perimeter | |
| G1 X-19.341 Y-1.266 E1450.88231 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1451.44378 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E1451.50893 ; perimeter | |
| G1 X-19.820 Y2.795 E1452.07040 ; perimeter | |
| G1 X-19.820 Y-1.745 E1452.13470 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1453.31123 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P68 ; update progress | |
| G1 F2100.000 E1448.31123 ; retract | |
| G1 Z13.200 F7800.000 ; move to next layer (127) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1453.31123 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1453.33999 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E1454.12729 ; perimeter | |
| G1 X-18.184 Y-0.169 E1454.15605 ; perimeter | |
| G1 X18.124 Y-0.169 E1454.94205 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1454.99587 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E1455.80821 ; perimeter | |
| G1 X-18.763 Y-0.748 E1455.86202 ; perimeter | |
| G1 X18.703 Y-0.748 E1456.67307 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1456.75193 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E1457.58932 ; perimeter | |
| G1 X-19.341 Y-1.326 E1457.66818 ; perimeter | |
| G1 X19.281 Y-1.326 E1458.50427 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1458.56943 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1459.13089 ; perimeter | |
| G1 X-19.820 Y-1.805 E1459.19605 ; perimeter | |
| G1 X19.760 Y-1.805 E1459.75666 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1460.93319 F600.000 ; fill | |
| M73 P68 ; update progress | |
| G1 F2100.000 E1455.93319 ; retract | |
| G1 Z13.200 F7800.000 ; move to next layer (43) and lift | |
| G1 X-17.634 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1460.93319 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.921 E1461.11130 F600.000 ; support material interface | |
| G1 X-21.540 Y3.515 E1461.12975 ; support material interface | |
| G1 X-20.600 Y3.432 E1461.17262 ; support material interface | |
| G1 X-20.600 Y3.026 E1461.19106 ; support material interface | |
| G1 X-21.540 Y3.109 E1461.23393 ; support material interface | |
| G1 X-21.540 Y2.703 E1461.25238 ; support material interface | |
| G1 X-20.600 Y2.619 E1461.29525 ; support material interface | |
| G1 X-21.295 Y2.275 E1461.33047 ; support material interface | |
| G1 X-21.540 Y2.297 E1461.34166 ; support material interface | |
| G1 F2100.000 E1456.34166 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X-16.650 Y3.894 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1461.34166 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y4.328 E1461.56464 F600.000 ; support material interface | |
| G1 X-21.540 Y4.734 E1461.58309 ; support material interface | |
| G1 X-16.650 Y4.300 E1461.80606 ; support material interface | |
| G1 X-16.650 Y4.706 E1461.82451 ; support material interface | |
| G1 X-21.540 Y5.140 E1462.04748 ; support material interface | |
| G1 X-21.540 Y5.546 E1462.06593 ; support material interface | |
| G1 X-16.650 Y5.112 E1462.28891 ; support material interface | |
| G1 X-16.650 Y5.519 E1462.30736 ; support material interface | |
| G1 X-21.540 Y5.952 E1462.53033 ; support material interface | |
| G1 X-21.540 Y6.359 E1462.54878 ; support material interface | |
| G1 X-16.650 Y5.925 E1462.77175 ; support material interface | |
| G1 X-16.650 Y6.331 E1462.79020 ; support material interface | |
| G1 X-21.540 Y6.765 E1463.01318 ; support material interface | |
| G1 X-21.474 Y7.165 E1463.03160 ; support material interface | |
| G1 X-16.650 Y6.737 E1463.25156 ; support material interface | |
| G1 X-16.895 Y7.165 E1463.27397 ; support material interface | |
| G1 X-16.650 Y7.143 E1463.28516 ; support material interface | |
| G1 X-16.997 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.928 E1463.47957 F600.000 ; support material interface | |
| G1 X-21.540 Y9.309 E1463.49582 ; support material interface | |
| G1 X-12.700 Y8.525 E1463.87414 ; support material interface | |
| G1 X-13.004 Y7.165 F7800.000 ; move to first support material interface point | |
| G1 X-8.146 Y6.734 E1464.09725 F600.000 ; support material interface | |
| G1 X-8.392 Y7.165 E1464.11994 ; support material interface | |
| G1 X-8.146 Y7.143 E1464.13121 ; support material interface | |
| G1 X-8.403 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y9.690 E1464.69343 F600.000 ; support material interface | |
| G1 X-21.540 Y10.072 E1464.70969 ; support material interface | |
| G1 X2.563 Y7.933 E1465.74119 ; support material interface | |
| G1 X2.371 Y8.332 E1465.76004 ; support material interface | |
| G1 X-21.540 Y10.453 E1466.78333 ; support material interface | |
| G1 X-21.540 Y10.834 E1466.79959 ; support material interface | |
| G1 X4.489 Y8.525 E1467.91353 ; support material interface | |
| G1 F2100.000 E1462.91353 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X7.638 Y6.867 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1467.91353 F2100.000 ; compensate retraction | |
| G1 X13.350 Y6.361 E1468.16445 F600.000 ; support material interface | |
| G1 X13.350 Y5.969 E1468.18157 ; support material interface | |
| G1 X7.835 Y6.459 E1468.42384 ; support material interface | |
| G1 X8.032 Y6.050 E1468.44370 ; support material interface | |
| G1 X13.350 Y5.578 E1468.67732 ; support material interface | |
| G1 X13.350 Y5.187 E1468.69444 ; support material interface | |
| G1 X8.229 Y5.641 E1468.91942 ; support material interface | |
| G1 X8.426 Y5.232 E1468.93927 ; support material interface | |
| G1 X13.350 Y4.795 E1469.15560 ; support material interface | |
| G1 X13.350 Y4.404 E1469.17272 ; support material interface | |
| G1 X8.623 Y4.823 E1469.38040 ; support material interface | |
| G1 X8.819 Y4.415 E1469.40025 ; support material interface | |
| G1 X13.350 Y4.013 E1469.59928 ; support material interface | |
| G1 X13.333 Y3.623 E1469.61635 ; support material interface | |
| G1 X9.016 Y4.006 E1469.80596 ; support material interface | |
| G1 X9.213 Y3.597 E1469.82581 ; support material interface | |
| G1 X9.462 Y3.575 E1469.83673 ; support material interface | |
| G1 X8.694 Y7.165 F7800.000 ; move to first support material interface point | |
| G1 X13.350 Y6.752 E1470.04129 F600.000 ; support material interface | |
| G1 X13.105 Y7.165 E1470.06232 ; support material interface | |
| G1 X13.350 Y7.143 E1470.07310 ; support material interface | |
| G1 X13.084 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.597 E1471.55485 F600.000 ; support material interface | |
| G1 X-21.540 Y11.215 E1471.57110 ; support material interface | |
| G1 X8.787 Y8.525 E1472.86895 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1473.43117 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1473.44743 ; support material interface | |
| G1 X12.700 Y13.515 E1473.82574 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1474.02015 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1474.04027 ; support material interface | |
| G1 X21.540 Y13.493 E1474.05077 ; support material interface | |
| G1 F2100.000 E1469.05077 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X21.540 Y7.143 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1474.05077 F2100.000 ; compensate retraction | |
| G1 X21.295 Y7.165 E1474.06209 F600.000 ; support material interface | |
| G1 X21.540 Y6.732 E1474.08494 ; support material interface | |
| G1 X16.664 Y7.165 E1474.30983 ; support material interface | |
| G1 X15.710 Y6.839 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y6.322 E1474.57871 F600.000 ; support material interface | |
| G1 X21.540 Y5.911 E1474.59758 ; support material interface | |
| G1 X15.710 Y6.428 E1474.86645 ; support material interface | |
| G1 X15.710 Y6.017 E1474.88533 ; support material interface | |
| G1 X21.540 Y5.500 E1475.15420 ; support material interface | |
| G1 X21.540 Y5.089 E1475.17308 ; support material interface | |
| G1 X15.710 Y5.606 E1475.44195 ; support material interface | |
| G1 X15.710 Y5.196 E1475.46083 ; support material interface | |
| G1 X21.540 Y4.678 E1475.72970 ; support material interface | |
| G1 X21.540 Y4.267 E1475.74857 ; support material interface | |
| G1 X15.710 Y4.785 E1476.01745 ; support material interface | |
| G1 X15.710 Y4.374 E1476.03632 ; support material interface | |
| G1 X21.540 Y3.857 E1476.30520 ; support material interface | |
| G1 X21.540 Y3.446 E1476.32407 ; support material interface | |
| G1 X20.600 Y3.529 E1476.36743 ; support material interface | |
| G1 X20.600 Y3.118 E1476.38631 ; support material interface | |
| G1 X21.540 Y3.035 E1476.42967 ; support material interface | |
| G1 X21.540 Y2.624 E1476.44854 ; support material interface | |
| G1 X20.600 Y2.708 E1476.49190 ; support material interface | |
| G1 X20.600 Y2.297 E1476.51077 ; support material interface | |
| G1 X20.845 Y2.275 E1476.52209 ; support material interface | |
| G1 X20.085 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X15.710 Y3.963 E1476.72384 F600.000 ; support material interface | |
| G1 F2100.000 E1471.72384 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1476.72384 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.978 E1478.38950 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1478.40576 ; support material interface | |
| G1 X21.520 Y8.539 E1480.24851 ; support material interface | |
| G1 X21.540 Y8.918 E1480.26471 ; support material interface | |
| G1 X-21.540 Y12.740 E1482.10835 ; support material interface | |
| G1 X-21.540 Y13.122 E1482.12460 ; support material interface | |
| G1 X21.540 Y9.300 E1483.96823 ; support material interface | |
| G1 X21.540 Y9.681 E1483.98449 ; support material interface | |
| G1 X-21.520 Y13.501 E1485.82724 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1487.49290 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1487.50915 ; support material interface | |
| G1 X-13.084 Y13.515 E1488.99091 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1490.28876 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1490.30501 ; support material interface | |
| G1 X-4.489 Y13.515 E1491.41895 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1492.34898 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1492.36524 ; support material interface | |
| G1 X4.105 Y13.515 E1493.11136 ; support material interface | |
| G1 X0.090 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X-5.290 Y8.249 E1493.34160 F600.000 ; support material interface | |
| G1 X-5.290 Y7.868 F7800.000 ; move to first support material interface point | |
| G1 X-4.208 Y7.771 E1493.38792 F600.000 ; support material interface | |
| G1 F2100.000 E1488.38792 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X-8.230 Y3.877 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1493.38792 F2100.000 ; compensate retraction | |
| G1 X-14.290 Y4.415 E1493.66626 F600.000 ; support material interface | |
| G1 X-14.290 Y4.824 E1493.68498 ; support material interface | |
| G1 X-8.146 Y4.279 E1493.96716 ; support material interface | |
| G1 X-8.146 Y4.688 E1493.98588 ; support material interface | |
| G1 X-14.290 Y5.233 E1494.26806 ; support material interface | |
| G1 X-14.290 Y5.643 E1494.28678 ; support material interface | |
| G1 X-8.146 Y5.097 E1494.56896 ; support material interface | |
| G1 X-8.146 Y5.507 E1494.58768 ; support material interface | |
| G1 X-14.290 Y6.052 E1494.86985 ; support material interface | |
| G1 X-14.290 Y6.461 E1494.88857 ; support material interface | |
| G1 X-8.146 Y5.916 E1495.17075 ; support material interface | |
| G1 X-8.146 Y6.325 E1495.18947 ; support material interface | |
| G1 X-14.290 Y6.870 E1495.47165 ; support material interface | |
| G1 X-14.045 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X-14.290 Y3.597 E1495.48293 F600.000 ; support material interface | |
| G1 X-14.290 Y4.006 E1495.50165 ; support material interface | |
| G1 X-9.433 Y3.575 E1495.72476 ; support material interface | |
| G1 F2100.000 E1490.72476 ; retract | |
| G1 Z13.200 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.000 F7800.000 ; restore layer Z | |
| G1 E1495.72476 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1495.73526 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P69 ; update progress | |
| G1 F2100.000 E1490.73526 ; retract | |
| G1 Z13.300 F7800.000 ; move to next layer (128) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z13.100 F7800.000 ; restore layer Z | |
| G1 E1495.73526 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1495.76402 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1496.55132 ; perimeter | |
| G1 X18.184 Y1.159 E1496.58008 ; perimeter | |
| G1 X-18.124 Y1.159 E1497.36608 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1497.41989 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1498.23224 ; perimeter | |
| G1 X18.763 Y1.738 E1498.28605 ; perimeter | |
| G1 X-18.703 Y1.738 E1499.09710 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1499.17596 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1500.01335 ; perimeter | |
| G1 X19.341 Y2.316 E1500.09221 ; perimeter | |
| G1 X-19.281 Y2.316 E1500.92830 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1500.99346 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1501.55492 ; perimeter | |
| G1 X19.820 Y2.795 E1501.62008 ; perimeter | |
| G1 X-19.760 Y2.795 E1502.18069 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1503.35722 F600.000 ; fill | |
| M73 P69 ; update progress | |
| G1 F2100.000 E1498.35722 ; retract | |
| G1 Z13.400 F7800.000 ; move to next layer (129) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.200 F7800.000 ; restore layer Z | |
| G1 E1503.35722 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1503.38598 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1504.17328 ; perimeter | |
| G1 X-18.184 Y-0.169 E1504.20205 ; perimeter | |
| G1 X18.124 Y-0.169 E1504.98804 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1505.04186 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1505.85420 ; perimeter | |
| G1 X-18.763 Y-0.748 E1505.90801 ; perimeter | |
| G1 X18.703 Y-0.748 E1506.71906 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1506.79792 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1507.63531 ; perimeter | |
| G1 X-19.341 Y-1.326 E1507.71417 ; perimeter | |
| G1 X19.281 Y-1.326 E1508.55027 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1508.61542 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1509.17688 ; perimeter | |
| G1 X-19.820 Y-1.805 E1509.24204 ; perimeter | |
| G1 X19.760 Y-1.805 E1509.80265 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1510.97918 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P70 ; update progress | |
| G1 F2100.000 E1505.97918 ; retract | |
| G1 Z13.500 F7800.000 ; move to next layer (130) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1510.97918 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1511.76648 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1511.79524 ; perimeter | |
| G1 X-18.184 Y1.159 E1512.58254 ; perimeter | |
| G1 X-18.184 Y-0.109 E1512.61000 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1513.42235 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1513.47616 ; perimeter | |
| G1 X-18.763 Y1.738 E1514.28851 ; perimeter | |
| G1 X-18.763 Y-0.688 E1514.34102 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1515.17841 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1515.25727 ; perimeter | |
| G1 X-19.341 Y2.316 E1516.09467 ; perimeter | |
| G1 X-19.341 Y-1.266 E1516.17223 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1516.73369 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1516.79885 ; perimeter | |
| G1 X-19.820 Y2.795 E1517.36031 ; perimeter | |
| G1 X-19.820 Y-1.745 E1517.42461 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1518.60114 F600.000 ; fill | |
| M73 P70 ; update progress | |
| G1 F2100.000 E1513.60114 ; retract | |
| G1 Z13.500 F7800.000 ; move to next layer (44) and lift | |
| G1 X20.600 Y2.297 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1518.60114 F2100.000 ; compensate retraction | |
| G1 X20.845 Y2.275 E1518.61201 F600.000 ; support material interface | |
| G1 X21.540 Y2.608 E1518.64601 ; support material interface | |
| G1 X20.600 Y2.691 E1518.68766 ; support material interface | |
| G1 X20.600 Y3.086 E1518.70507 ; support material interface | |
| G1 X21.540 Y3.003 E1518.74672 ; support material interface | |
| G1 X21.540 Y3.397 E1518.76413 ; support material interface | |
| G1 X20.600 Y3.481 E1518.80578 ; support material interface | |
| G1 X19.536 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X15.510 Y3.932 E1518.98413 F600.000 ; support material interface | |
| G1 X15.510 Y4.327 E1519.00155 ; support material interface | |
| G1 X21.540 Y3.792 E1519.26867 ; support material interface | |
| G1 X21.540 Y4.186 E1519.28608 ; support material interface | |
| G1 X15.510 Y4.721 E1519.55320 ; support material interface | |
| G1 X15.510 Y5.116 E1519.57061 ; support material interface | |
| G1 X21.540 Y4.581 E1519.83773 ; support material interface | |
| G1 X21.540 Y4.976 E1519.85515 ; support material interface | |
| G1 X15.510 Y5.511 E1520.12227 ; support material interface | |
| G1 X15.510 Y5.905 E1520.13968 ; support material interface | |
| G1 X21.540 Y5.370 E1520.40680 ; support material interface | |
| G1 X21.540 Y5.765 E1520.42421 ; support material interface | |
| G1 X15.510 Y6.300 E1520.69134 ; support material interface | |
| G1 X15.510 Y6.694 E1520.70875 ; support material interface | |
| G1 X21.540 Y6.159 E1520.97587 ; support material interface | |
| G1 X21.540 Y6.554 E1520.99328 ; support material interface | |
| G1 X15.510 Y7.089 E1521.26040 ; support material interface | |
| G1 X16.847 Y7.365 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y6.949 E1521.46832 F600.000 ; support material interface | |
| G1 X21.295 Y7.365 E1521.48964 ; support material interface | |
| G1 X21.540 Y7.343 E1521.50052 ; support material interface | |
| G1 F2100.000 E1516.50052 ; retract | |
| G1 Z13.500 F7800.000 ; lift plate during travel | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1521.50052 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.978 E1523.16618 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1523.18243 ; support material interface | |
| G1 X21.520 Y8.539 E1525.02518 ; support material interface | |
| G1 X21.540 Y8.918 E1525.04138 ; support material interface | |
| G1 X-21.540 Y12.740 E1526.88502 ; support material interface | |
| G1 X-21.540 Y13.122 E1526.90127 ; support material interface | |
| G1 X21.540 Y9.300 E1528.74491 ; support material interface | |
| G1 X21.540 Y9.681 E1528.76116 ; support material interface | |
| G1 X-21.520 Y13.501 E1530.60391 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1532.26957 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1532.28583 ; support material interface | |
| G1 X-13.084 Y13.515 E1533.76758 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1535.06543 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1535.08168 ; support material interface | |
| G1 X-4.489 Y13.515 E1536.19562 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1537.12565 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1537.14191 ; support material interface | |
| G1 X4.105 Y13.515 E1537.88804 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1538.45026 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1538.46651 ; support material interface | |
| G1 X12.700 Y13.515 E1538.84483 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1539.03924 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1539.05935 ; support material interface | |
| G1 X21.540 Y13.493 E1539.06986 ; support material interface | |
| G1 X13.084 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.597 E1540.55161 F600.000 ; support material interface | |
| G1 X-21.540 Y11.215 E1540.56786 ; support material interface | |
| G1 X8.787 Y8.525 E1541.86571 ; support material interface | |
| G1 X8.648 Y7.365 F7800.000 ; move to first support material interface point | |
| G1 X13.550 Y6.930 E1542.09303 F600.000 ; support material interface | |
| G1 X13.305 Y7.365 E1542.11610 ; support material interface | |
| G1 X13.550 Y7.343 E1542.12748 ; support material interface | |
| G1 X9.462 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X9.213 Y3.597 E1542.13901 F600.000 ; support material interface | |
| G1 X9.005 Y4.029 E1542.16113 ; support material interface | |
| G1 X13.533 Y3.627 E1542.37109 ; support material interface | |
| G1 X13.550 Y4.038 E1542.39012 ; support material interface | |
| G1 X8.798 Y4.460 E1542.61051 ; support material interface | |
| G1 X8.590 Y4.892 E1542.63263 ; support material interface | |
| G1 X13.550 Y4.452 E1542.86266 ; support material interface | |
| G1 X13.550 Y4.865 E1542.88175 ; support material interface | |
| G1 X8.382 Y5.323 E1543.12141 ; support material interface | |
| G1 X8.174 Y5.755 E1543.14354 ; support material interface | |
| G1 X13.550 Y5.278 E1543.39284 ; support material interface | |
| G1 X13.550 Y5.691 E1543.41193 ; support material interface | |
| G1 X7.966 Y6.186 E1543.67087 ; support material interface | |
| G1 X7.758 Y6.618 E1543.69300 ; support material interface | |
| G1 X13.550 Y6.104 E1543.96158 ; support material interface | |
| G1 X13.550 Y6.517 E1543.98066 ; support material interface | |
| G1 X7.550 Y7.049 E1544.25888 ; support material interface | |
| G1 F2100.000 E1539.25888 ; retract | |
| G1 Z13.500 F7800.000 ; lift plate during travel | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1544.25888 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y10.834 E1545.37282 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1545.38907 ; support material interface | |
| G1 X2.371 Y8.332 E1546.41237 ; support material interface | |
| G1 X2.563 Y7.933 E1546.43122 ; support material interface | |
| G1 X-21.540 Y10.072 E1547.46272 ; support material interface | |
| G1 X-21.540 Y9.690 E1547.47898 ; support material interface | |
| G1 X-8.403 Y8.525 E1548.04120 ; support material interface | |
| G1 X-8.146 Y7.343 F7800.000 ; move to first support material interface point | |
| G1 X-8.392 Y7.365 E1548.05199 F600.000 ; support material interface | |
| G1 X-8.146 Y6.952 E1548.07306 ; support material interface | |
| G1 X-12.808 Y7.365 E1548.27805 ; support material interface | |
| G1 X-12.700 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y9.309 E1548.65637 F600.000 ; support material interface | |
| G1 X-21.540 Y8.928 E1548.67262 ; support material interface | |
| G1 X-16.997 Y8.525 E1548.86703 ; support material interface | |
| G1 X-16.450 Y7.343 F7800.000 ; move to first support material interface point | |
| G1 X-16.695 Y7.365 E1548.87785 F600.000 ; support material interface | |
| G1 X-16.450 Y6.951 E1548.89901 ; support material interface | |
| G1 X-21.122 Y7.365 E1549.10498 ; support material interface | |
| G1 X-21.540 Y7.009 E1549.12908 ; support material interface | |
| G1 X-16.450 Y6.558 E1549.35348 ; support material interface | |
| G1 X-16.450 Y6.165 E1549.37073 ; support material interface | |
| G1 X-21.540 Y6.617 E1549.59513 ; support material interface | |
| G1 X-21.540 Y6.224 E1549.61238 ; support material interface | |
| G1 X-16.450 Y5.772 E1549.83678 ; support material interface | |
| G1 X-16.450 Y5.380 E1549.85403 ; support material interface | |
| G1 X-21.540 Y5.831 E1550.07843 ; support material interface | |
| G1 X-21.540 Y5.439 E1550.09568 ; support material interface | |
| G1 X-16.450 Y4.987 E1550.32008 ; support material interface | |
| G1 X-16.450 Y4.594 E1550.33732 ; support material interface | |
| G1 X-21.540 Y5.046 E1550.56173 ; support material interface | |
| G1 X-21.540 Y4.653 E1550.57897 ; support material interface | |
| G1 X-16.450 Y4.201 E1550.80338 ; support material interface | |
| G1 X-16.451 Y3.809 E1550.82062 ; support material interface | |
| G1 X-21.540 Y4.260 E1551.04497 ; support material interface | |
| G1 X-21.540 Y3.868 E1551.06222 ; support material interface | |
| G1 X-18.241 Y3.575 E1551.20767 ; support material interface | |
| G1 X-20.600 Y3.391 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y3.475 E1551.24912 F600.000 ; support material interface | |
| G1 X-21.540 Y3.082 E1551.26636 ; support material interface | |
| G1 X-20.600 Y2.999 E1551.30781 ; support material interface | |
| G1 X-20.600 Y2.606 E1551.32506 ; support material interface | |
| G1 X-21.540 Y2.689 E1551.36651 ; support material interface | |
| G1 X-21.540 Y2.297 E1551.38375 ; support material interface | |
| G1 X-21.295 Y2.275 E1551.39457 ; support material interface | |
| G1 F2100.000 E1546.39457 ; retract | |
| G1 Z13.500 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1551.39457 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1551.40508 F600.000 ; support material interface | |
| G1 F2100.000 E1546.40508 ; retract | |
| G1 Z13.500 F7800.000 ; lift plate during travel | |
| G1 X-14.490 Y7.123 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1551.40508 F2100.000 ; compensate retraction | |
| G1 X-8.146 Y6.560 E1551.68404 F600.000 ; support material interface | |
| G1 X-8.146 Y6.168 E1551.70120 ; support material interface | |
| G1 X-14.490 Y6.731 E1551.98017 ; support material interface | |
| G1 X-14.490 Y6.339 E1551.99734 ; support material interface | |
| G1 X-8.146 Y5.776 E1552.27631 ; support material interface | |
| G1 X-8.146 Y5.384 E1552.29347 ; support material interface | |
| G1 X-14.490 Y5.947 E1552.57244 ; support material interface | |
| G1 X-14.490 Y5.556 E1552.58960 ; support material interface | |
| G1 X-8.146 Y4.993 E1552.86858 ; support material interface | |
| G1 X-8.146 Y4.601 E1552.88574 ; support material interface | |
| G1 X-14.490 Y5.164 E1553.16471 ; support material interface | |
| G1 X-14.490 Y4.772 E1553.18187 ; support material interface | |
| G1 X-8.146 Y4.209 E1553.46085 ; support material interface | |
| G1 X-8.289 Y3.830 E1553.47859 ; support material interface | |
| G1 X-14.490 Y4.380 E1553.75128 ; support material interface | |
| G1 X-14.490 Y3.988 E1553.76844 ; support material interface | |
| G1 X-9.829 Y3.575 E1553.97344 ; support material interface | |
| G1 X-14.245 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X-14.490 Y3.597 E1553.98423 F600.000 ; support material interface | |
| G1 F2100.000 E1548.98423 ; retract | |
| G1 Z13.500 F7800.000 ; lift plate during travel | |
| G1 X-5.290 Y7.868 F7800.000 ; move to first support material interface point | |
| G1 Z13.300 F7800.000 ; restore layer Z | |
| G1 E1553.98423 F2100.000 ; compensate retraction | |
| G1 X-4.208 Y7.771 E1554.03056 F600.000 ; support material interface | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 X0.090 Y7.771 E1554.26079 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P70 ; update progress | |
| G1 F2100.000 E1549.26079 ; retract | |
| G1 Z13.600 F7800.000 ; move to next layer (131) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z13.400 F7800.000 ; restore layer Z | |
| G1 E1554.26079 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E1555.04809 F1759.784 ; perimeter | |
| G1 X-18.184 Y-0.169 E1555.07685 ; perimeter | |
| G1 X18.184 Y-0.169 E1555.86415 ; perimeter | |
| G1 X18.184 Y1.099 E1555.89161 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E1556.70396 F1759.784 ; perimeter | |
| G1 X-18.763 Y-0.748 E1556.75777 ; perimeter | |
| G1 X18.763 Y-0.748 E1557.57011 ; perimeter | |
| G1 X18.763 Y1.678 E1557.62263 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E1558.46002 F1759.784 ; perimeter | |
| G1 X-19.341 Y-1.326 E1558.53888 ; perimeter | |
| G1 X19.341 Y-1.326 E1559.37627 ; perimeter | |
| G1 X19.341 Y2.256 E1559.45383 ; perimeter | |
| G1 X19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E1560.01530 F600.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E1560.08045 ; perimeter | |
| G1 X19.820 Y-1.805 E1560.64192 ; perimeter | |
| G1 X19.820 Y2.735 E1560.70622 ; perimeter | |
| G1 X19.474 Y2.595 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1561.88275 F600.000 ; fill | |
| M73 P71 ; update progress | |
| G1 F2100.000 E1556.88275 ; retract | |
| G1 Z13.700 F7800.000 ; move to next layer (132) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.500 F7800.000 ; restore layer Z | |
| G1 E1561.88275 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1562.67005 F1759.784 ; perimeter | |
| G1 X18.184 Y1.159 E1562.69881 ; perimeter | |
| G1 X-18.184 Y1.159 E1563.48611 ; perimeter | |
| G1 X-18.184 Y-0.109 E1563.51357 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1564.32592 F1759.784 ; perimeter | |
| G1 X18.763 Y1.738 E1564.37973 ; perimeter | |
| G1 X-18.763 Y1.738 E1565.19207 ; perimeter | |
| G1 X-18.763 Y-0.688 E1565.24459 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1566.08198 F1759.784 ; perimeter | |
| G1 X19.341 Y2.316 E1566.16084 ; perimeter | |
| G1 X-19.341 Y2.316 E1566.99823 ; perimeter | |
| G1 X-19.341 Y-1.266 E1567.07580 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1567.63726 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E1567.70241 ; perimeter | |
| G1 X-19.820 Y2.795 E1568.26388 ; perimeter | |
| G1 X-19.820 Y-1.745 E1568.32818 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1569.50471 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P71 ; update progress | |
| G1 F2100.000 E1564.50471 ; retract | |
| G1 Z13.800 F7800.000 ; move to next layer (133) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1569.50471 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1569.53348 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E1570.32077 ; perimeter | |
| G1 X-18.184 Y-0.169 E1570.34954 ; perimeter | |
| G1 X18.124 Y-0.169 E1571.13553 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1571.18935 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E1572.00169 ; perimeter | |
| G1 X-18.763 Y-0.748 E1572.05550 ; perimeter | |
| G1 X18.703 Y-0.748 E1572.86655 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1572.94541 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E1573.78280 ; perimeter | |
| G1 X-19.341 Y-1.326 E1573.86166 ; perimeter | |
| G1 X19.281 Y-1.326 E1574.69776 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1574.76291 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1575.32438 ; perimeter | |
| G1 X-19.820 Y-1.805 E1575.38953 ; perimeter | |
| G1 X19.760 Y-1.805 E1575.95014 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1577.12667 F600.000 ; fill | |
| M73 P72 ; update progress | |
| G1 F2100.000 E1572.12667 ; retract | |
| G1 Z13.800 F7800.000 ; move to next layer (45) and lift | |
| G1 X-18.767 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1577.12667 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.821 E1577.24530 F600.000 ; support material interface | |
| G1 X-21.540 Y3.440 E1577.26154 ; support material interface | |
| G1 X-20.600 Y3.356 E1577.30176 ; support material interface | |
| G1 X-20.600 Y2.975 E1577.31799 ; support material interface | |
| G1 X-21.540 Y3.059 E1577.35821 ; support material interface | |
| G1 X-21.540 Y2.678 E1577.37445 ; support material interface | |
| G1 X-20.600 Y2.594 E1577.41466 ; support material interface | |
| G1 X-21.295 Y2.275 E1577.44725 ; support material interface | |
| G1 X-21.540 Y2.297 E1577.45774 ; support material interface | |
| G1 F2100.000 E1572.45774 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X-16.258 Y3.733 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1577.45774 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y4.202 E1577.68371 F600.000 ; support material interface | |
| G1 X-21.540 Y4.583 E1577.69994 ; support material interface | |
| G1 X-16.250 Y4.114 E1577.92623 ; support material interface | |
| G1 X-16.250 Y4.495 E1577.94247 ; support material interface | |
| G1 X-21.540 Y4.964 E1578.16876 ; support material interface | |
| G1 X-21.540 Y5.345 E1578.18500 ; support material interface | |
| G1 X-16.250 Y4.876 E1578.41129 ; support material interface | |
| G1 X-16.250 Y5.257 E1578.42753 ; support material interface | |
| G1 X-21.540 Y5.726 E1578.65382 ; support material interface | |
| G1 X-21.540 Y6.107 E1578.67006 ; support material interface | |
| G1 X-16.250 Y5.638 E1578.89635 ; support material interface | |
| G1 X-16.250 Y6.019 E1578.91259 ; support material interface | |
| G1 X-21.540 Y6.488 E1579.13888 ; support material interface | |
| G1 X-21.540 Y6.869 E1579.15511 ; support material interface | |
| G1 X-16.250 Y6.400 E1579.38141 ; support material interface | |
| G1 X-16.250 Y6.781 E1579.39764 ; support material interface | |
| G1 X-21.540 Y7.251 E1579.62393 ; support material interface | |
| G1 X-20.791 Y7.565 E1579.65856 ; support material interface | |
| G1 X-16.250 Y7.162 E1579.85280 ; support material interface | |
| G1 X-16.495 Y7.565 E1579.87290 ; support material interface | |
| G1 X-16.250 Y7.543 E1579.88340 ; support material interface | |
| G1 X-16.997 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.928 E1580.07781 F600.000 ; support material interface | |
| G1 X-21.540 Y9.309 E1580.09406 ; support material interface | |
| G1 X-12.700 Y8.525 E1580.47238 ; support material interface | |
| G1 X-13.031 Y7.565 F7800.000 ; move to first support material interface point | |
| G1 X-8.146 Y7.132 E1580.69804 F600.000 ; support material interface | |
| G1 X-8.392 Y7.565 E1580.72095 ; support material interface | |
| G1 X-8.146 Y7.543 E1580.73229 ; support material interface | |
| G1 X-8.403 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y9.690 E1581.29452 F600.000 ; support material interface | |
| G1 X-21.540 Y10.072 E1581.31077 ; support material interface | |
| G1 X2.563 Y7.933 E1582.34228 ; support material interface | |
| G1 X2.371 Y8.332 E1582.36112 ; support material interface | |
| G1 X-21.540 Y10.453 E1583.38442 ; support material interface | |
| G1 X-21.540 Y10.834 E1583.40067 ; support material interface | |
| G1 X4.489 Y8.525 E1584.51461 ; support material interface | |
| G1 F2100.000 E1579.51461 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X7.622 Y6.901 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1584.51461 F2100.000 ; compensate retraction | |
| G1 X13.750 Y6.357 E1584.78657 F600.000 ; support material interface | |
| G1 X13.750 Y6.753 E1584.80405 ; support material interface | |
| G1 X7.423 Y7.314 E1585.08484 ; support material interface | |
| G1 X7.821 Y6.488 E1585.12537 ; support material interface | |
| G1 X13.750 Y5.962 E1585.38850 ; support material interface | |
| G1 X13.750 Y5.567 E1585.40598 ; support material interface | |
| G1 X8.020 Y6.075 E1585.66029 ; support material interface | |
| G1 X8.219 Y5.662 E1585.68055 ; support material interface | |
| G1 X13.750 Y5.171 E1585.92603 ; support material interface | |
| G1 X13.750 Y4.776 E1585.94351 ; support material interface | |
| G1 X8.418 Y5.249 E1586.18016 ; support material interface | |
| G1 X8.616 Y4.836 E1586.20043 ; support material interface | |
| G1 X13.750 Y4.381 E1586.42825 ; support material interface | |
| G1 X13.750 Y3.985 E1586.44573 ; support material interface | |
| G1 X8.815 Y4.423 E1586.66473 ; support material interface | |
| G1 X9.014 Y4.010 E1586.68499 ; support material interface | |
| G1 X13.730 Y3.592 E1586.89426 ; support material interface | |
| G1 X15.310 Y3.908 F7800.000 ; move to first support material interface point | |
| G1 X19.066 Y3.575 E1587.05479 F600.000 ; support material interface | |
| G1 F2100.000 E1582.05479 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X20.845 Y2.275 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1587.05479 F2100.000 ; compensate retraction | |
| G1 X20.600 Y2.297 E1587.06528 F600.000 ; support material interface | |
| G1 X20.600 Y2.677 E1587.08149 ; support material interface | |
| G1 X21.540 Y2.594 E1587.12167 ; support material interface | |
| G1 X21.540 Y2.975 E1587.13788 ; support material interface | |
| G1 X20.600 Y3.058 E1587.17806 ; support material interface | |
| G1 X20.600 Y3.439 E1587.19426 ; support material interface | |
| G1 X21.540 Y3.355 E1587.23444 ; support material interface | |
| G1 X21.540 Y3.736 E1587.25065 ; support material interface | |
| G1 X15.310 Y4.289 E1587.51691 ; support material interface | |
| G1 X15.310 Y4.670 E1587.53312 ; support material interface | |
| G1 X21.540 Y4.117 E1587.79938 ; support material interface | |
| G1 X21.540 Y4.498 E1587.81558 ; support material interface | |
| G1 X15.310 Y5.050 E1588.08184 ; support material interface | |
| G1 X15.310 Y5.431 E1588.09805 ; support material interface | |
| G1 X21.540 Y4.878 E1588.36431 ; support material interface | |
| G1 X21.540 Y5.259 E1588.38052 ; support material interface | |
| G1 X15.310 Y5.812 E1588.64677 ; support material interface | |
| G1 X15.310 Y6.192 E1588.66298 ; support material interface | |
| G1 X21.540 Y5.640 E1588.92924 ; support material interface | |
| G1 X21.540 Y6.020 E1588.94545 ; support material interface | |
| G1 X15.310 Y6.573 E1589.21171 ; support material interface | |
| G1 X15.310 Y6.954 E1589.22791 ; support material interface | |
| G1 X21.540 Y6.401 E1589.49417 ; support material interface | |
| G1 X21.540 Y6.782 E1589.51038 ; support material interface | |
| G1 X15.311 Y7.334 E1589.77658 ; support material interface | |
| G1 X13.750 Y7.543 F7800.000 ; move to first support material interface point | |
| G1 X13.505 Y7.565 E1589.78747 F600.000 ; support material interface | |
| G1 X13.750 Y7.148 E1589.80887 ; support material interface | |
| G1 X9.048 Y7.565 E1590.01753 ; support material interface | |
| G1 X8.787 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.215 E1591.31538 F600.000 ; support material interface | |
| G1 X-21.540 Y11.597 E1591.33163 ; support material interface | |
| G1 X13.084 Y8.525 E1592.81338 ; support material interface | |
| G1 F2100.000 E1587.81338 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X17.003 Y7.565 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1592.81338 F2100.000 ; compensate retraction | |
| G1 X21.540 Y7.163 E1593.00728 F600.000 ; support material interface | |
| G1 X21.295 Y7.565 E1593.02735 ; support material interface | |
| G1 X21.540 Y7.543 E1593.03784 ; support material interface | |
| G1 F2100.000 E1588.03784 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1593.03784 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y11.978 E1594.70349 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1594.71975 ; support material interface | |
| G1 X21.520 Y8.539 E1596.56250 ; support material interface | |
| G1 X21.540 Y8.918 E1596.57870 ; support material interface | |
| G1 X-21.540 Y12.740 E1598.42234 ; support material interface | |
| G1 X-21.540 Y13.122 E1598.43859 ; support material interface | |
| G1 X21.540 Y9.300 E1600.28222 ; support material interface | |
| G1 X21.540 Y9.681 E1600.29848 ; support material interface | |
| G1 X-21.520 Y13.501 E1602.14123 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1603.80689 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1603.82315 ; support material interface | |
| G1 X-13.084 Y13.515 E1605.30490 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1606.60275 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1606.61900 ; support material interface | |
| G1 X-4.489 Y13.515 E1607.73294 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1608.66297 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1608.67923 ; support material interface | |
| G1 X4.105 Y13.515 E1609.42535 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1609.98758 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1610.00383 ; support material interface | |
| G1 X12.700 Y13.515 E1610.38215 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1610.57656 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1610.59667 ; support material interface | |
| G1 X21.540 Y13.493 E1610.60717 ; support material interface | |
| G1 F2100.000 E1605.60717 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X9.462 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1610.60717 F2100.000 ; compensate retraction | |
| G1 X9.213 Y3.597 E1610.61821 F600.000 ; support material interface | |
| G1 F2100.000 E1605.61821 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X0.090 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1610.61821 F2100.000 ; compensate retraction | |
| G1 X-5.290 Y8.249 E1610.84844 F600.000 ; support material interface | |
| G1 X-5.290 Y7.868 F7800.000 ; move to first support material interface point | |
| G1 X-4.208 Y7.771 E1610.89477 F600.000 ; support material interface | |
| G1 F2100.000 E1605.89477 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X-9.806 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1610.89477 F2100.000 ; compensate retraction | |
| G1 X-14.690 Y4.008 E1611.12043 F600.000 ; support material interface | |
| G1 X-14.690 Y4.420 E1611.13937 ; support material interface | |
| G1 X-8.265 Y3.850 E1611.43621 ; support material interface | |
| G1 X-8.146 Y4.251 E1611.45545 ; support material interface | |
| G1 X-14.690 Y4.831 E1611.75776 ; support material interface | |
| G1 X-14.690 Y5.243 E1611.77670 ; support material interface | |
| G1 X-8.146 Y4.662 E1612.07901 ; support material interface | |
| G1 X-8.146 Y5.074 E1612.09795 ; support material interface | |
| G1 X-14.690 Y5.654 E1612.40026 ; support material interface | |
| G1 X-14.690 Y6.066 E1612.41920 ; support material interface | |
| G1 X-8.146 Y5.486 E1612.72151 ; support material interface | |
| G1 X-8.146 Y5.897 E1612.74045 ; support material interface | |
| G1 X-14.690 Y6.478 E1613.04275 ; support material interface | |
| G1 X-14.690 Y6.889 E1613.06169 ; support material interface | |
| G1 X-8.146 Y6.309 E1613.36400 ; support material interface | |
| G1 X-8.146 Y6.720 E1613.38294 ; support material interface | |
| G1 X-14.690 Y7.301 E1613.68525 ; support material interface | |
| G1 X-14.690 Y3.597 F7800.000 ; move to first support material interface point | |
| G1 X-14.445 Y3.575 E1613.69659 F600.000 ; support material interface | |
| G1 F2100.000 E1608.69659 ; retract | |
| G1 Z13.800 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.600 F7800.000 ; restore layer Z | |
| G1 E1613.69659 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1613.70709 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P72 ; update progress | |
| G1 F2100.000 E1608.70709 ; retract | |
| G1 Z13.900 F7800.000 ; move to next layer (134) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z13.700 F7800.000 ; restore layer Z | |
| G1 E1613.70709 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1613.73586 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1614.52315 ; perimeter | |
| G1 X18.184 Y1.159 E1614.55192 ; perimeter | |
| G1 X-18.124 Y1.159 E1615.33792 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1615.39173 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1616.20407 ; perimeter | |
| G1 X18.763 Y1.738 E1616.25789 ; perimeter | |
| G1 X-18.703 Y1.738 E1617.06893 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1617.14779 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1617.98518 ; perimeter | |
| G1 X19.341 Y2.316 E1618.06404 ; perimeter | |
| G1 X-19.281 Y2.316 E1618.90014 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1618.96529 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1619.52676 ; perimeter | |
| G1 X19.820 Y2.795 E1619.59191 ; perimeter | |
| G1 X-19.760 Y2.795 E1620.15253 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1621.32905 F600.000 ; fill | |
| M73 P72 ; update progress | |
| G1 F2100.000 E1616.32905 ; retract | |
| G1 Z14.000 F7800.000 ; move to next layer (135) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.800 F7800.000 ; restore layer Z | |
| G1 E1621.32905 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1621.35782 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1622.14511 ; perimeter | |
| G1 X-18.184 Y-0.169 E1622.17388 ; perimeter | |
| G1 X18.124 Y-0.169 E1622.95988 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1623.01369 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1623.82603 ; perimeter | |
| G1 X-18.763 Y-0.748 E1623.87985 ; perimeter | |
| G1 X18.703 Y-0.748 E1624.69089 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1624.76975 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1625.60715 ; perimeter | |
| G1 X-19.341 Y-1.326 E1625.68601 ; perimeter | |
| G1 X19.281 Y-1.326 E1626.52210 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1626.58725 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1627.14872 ; perimeter | |
| G1 X-19.820 Y-1.805 E1627.21387 ; perimeter | |
| G1 X19.760 Y-1.805 E1627.77449 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1628.95102 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P73 ; update progress | |
| G1 F2100.000 E1623.95102 ; retract | |
| G1 Z14.100 F7800.000 ; move to next layer (136) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1628.95102 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1629.73831 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1629.76708 ; perimeter | |
| G1 X-18.184 Y1.159 E1630.55437 ; perimeter | |
| G1 X-18.184 Y-0.109 E1630.58184 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1631.39418 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1631.44800 ; perimeter | |
| G1 X-18.763 Y1.738 E1632.26034 ; perimeter | |
| G1 X-18.763 Y-0.688 E1632.31285 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1633.15025 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1633.22911 ; perimeter | |
| G1 X-19.341 Y2.316 E1634.06650 ; perimeter | |
| G1 X-19.341 Y-1.266 E1634.14406 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1634.70552 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1634.77068 ; perimeter | |
| G1 X-19.820 Y2.795 E1635.33214 ; perimeter | |
| G1 X-19.820 Y-1.745 E1635.39645 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1636.57298 F600.000 ; fill | |
| M73 P73 ; update progress | |
| G1 F2100.000 E1631.57298 ; retract | |
| G1 Z14.100 F7800.000 ; move to next layer (46) and lift | |
| G1 X20.845 Y2.275 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1636.57298 F2100.000 ; compensate retraction | |
| G1 X20.600 Y2.297 E1636.58386 F600.000 ; support material interface | |
| G1 X20.600 Y2.692 E1636.60130 ; support material interface | |
| G1 X21.540 Y2.608 E1636.64299 ; support material interface | |
| G1 X21.540 Y3.003 E1636.66044 ; support material interface | |
| G1 X20.600 Y3.087 E1636.70213 ; support material interface | |
| G1 X20.600 Y3.482 E1636.71958 ; support material interface | |
| G1 X21.540 Y3.398 E1636.76126 ; support material interface | |
| G1 X21.540 Y3.793 E1636.77871 ; support material interface | |
| G1 X15.110 Y4.364 E1637.06383 ; support material interface | |
| G1 X15.110 Y4.759 E1637.08127 ; support material interface | |
| G1 X21.540 Y4.188 E1637.36639 ; support material interface | |
| G1 X21.540 Y4.583 E1637.38384 ; support material interface | |
| G1 X15.110 Y5.154 E1637.66896 ; support material interface | |
| G1 X15.110 Y5.549 E1637.68640 ; support material interface | |
| G1 X21.540 Y4.978 E1637.97152 ; support material interface | |
| G1 X21.540 Y5.373 E1637.98897 ; support material interface | |
| G1 X15.110 Y5.944 E1638.27408 ; support material interface | |
| G1 X15.110 Y6.339 E1638.29153 ; support material interface | |
| G1 X21.540 Y5.768 E1638.57665 ; support material interface | |
| G1 X21.540 Y6.163 E1638.59409 ; support material interface | |
| G1 X15.110 Y6.734 E1638.87921 ; support material interface | |
| G1 X15.110 Y7.129 E1638.89666 ; support material interface | |
| G1 X21.540 Y6.558 E1639.18178 ; support material interface | |
| G1 X21.540 Y6.953 E1639.19922 ; support material interface | |
| G1 X15.110 Y7.524 E1639.48432 ; support material interface | |
| G1 X13.950 Y7.743 F7800.000 ; move to first support material interface point | |
| G1 X13.705 Y7.765 E1639.49481 F600.000 ; support material interface | |
| G1 X13.950 Y7.363 E1639.51486 ; support material interface | |
| G1 X9.415 Y7.765 E1639.70859 ; support material interface | |
| G1 X8.787 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.215 E1641.00643 F600.000 ; support material interface | |
| G1 X-21.540 Y11.597 E1641.02269 ; support material interface | |
| G1 X13.084 Y8.525 E1642.50444 ; support material interface | |
| G1 X13.950 Y6.982 F7800.000 ; move to first support material interface point | |
| G1 X7.299 Y7.572 E1642.78858 F600.000 ; support material interface | |
| G1 X7.490 Y7.175 E1642.80735 ; support material interface | |
| G1 X13.950 Y6.602 E1643.08331 ; support material interface | |
| G1 X13.950 Y6.221 E1643.09950 ; support material interface | |
| G1 X7.682 Y6.777 E1643.36728 ; support material interface | |
| G1 F2100.000 E1638.36728 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1643.36728 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y10.834 E1644.48123 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1644.49748 ; support material interface | |
| G1 X2.371 Y8.332 E1645.52078 ; support material interface | |
| G1 X2.563 Y7.933 E1645.53962 ; support material interface | |
| G1 X-21.540 Y10.072 E1646.57113 ; support material interface | |
| G1 X-21.540 Y9.690 E1646.58738 ; support material interface | |
| G1 X-8.403 Y8.525 E1647.14960 ; support material interface | |
| G1 X-8.146 Y7.743 F7800.000 ; move to first support material interface point | |
| G1 X-8.392 Y7.765 E1647.16049 F600.000 ; support material interface | |
| G1 X-8.146 Y7.348 E1647.18189 ; support material interface | |
| G1 X-12.849 Y7.765 E1647.39062 ; support material interface | |
| G1 X-12.700 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y9.309 E1647.76894 F600.000 ; support material interface | |
| G1 X-21.540 Y8.928 E1647.78519 ; support material interface | |
| G1 X-16.997 Y8.525 E1647.97960 ; support material interface | |
| G1 X-16.050 Y7.743 F7800.000 ; move to first support material interface point | |
| G1 X-16.295 Y7.765 E1647.99050 F600.000 ; support material interface | |
| G1 X-16.050 Y7.348 E1648.01191 ; support material interface | |
| G1 X-20.754 Y7.765 E1648.22081 ; support material interface | |
| G1 X-21.540 Y7.439 E1648.25844 ; support material interface | |
| G1 X-16.050 Y6.952 E1648.50223 ; support material interface | |
| G1 X-16.050 Y6.557 E1648.51973 ; support material interface | |
| G1 X-21.540 Y7.044 E1648.76352 ; support material interface | |
| G1 X-21.540 Y6.648 E1648.78102 ; support material interface | |
| G1 X-16.050 Y6.161 E1649.02481 ; support material interface | |
| G1 X-16.050 Y5.765 E1649.04231 ; support material interface | |
| G1 X-21.540 Y6.252 E1649.28610 ; support material interface | |
| G1 X-21.540 Y5.857 E1649.30360 ; support material interface | |
| G1 X-16.050 Y5.370 E1649.54739 ; support material interface | |
| G1 X-16.050 Y4.974 E1649.56489 ; support material interface | |
| G1 X-21.540 Y5.461 E1649.80868 ; support material interface | |
| G1 X-21.540 Y5.066 E1649.82618 ; support material interface | |
| G1 X-16.050 Y4.579 E1650.06997 ; support material interface | |
| G1 X-16.050 Y4.183 E1650.08747 ; support material interface | |
| G1 X-21.540 Y4.670 E1650.33127 ; support material interface | |
| G1 X-21.540 Y4.275 E1650.34876 ; support material interface | |
| G1 X-16.053 Y3.788 E1650.59243 ; support material interface | |
| G1 X-14.645 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X-14.890 Y3.597 E1650.60332 F600.000 ; support material interface | |
| G1 X-14.890 Y3.992 E1650.62080 ; support material interface | |
| G1 X-10.188 Y3.575 E1650.82953 ; support material interface | |
| G1 X-8.321 Y3.805 F7800.000 ; move to first support material interface point | |
| G1 X-14.890 Y4.387 E1651.12109 F600.000 ; support material interface | |
| G1 X-14.890 Y4.783 E1651.13857 ; support material interface | |
| G1 X-8.146 Y4.185 E1651.43790 ; support material interface | |
| G1 X-8.146 Y4.580 E1651.45538 ; support material interface | |
| G1 X-14.890 Y5.178 E1651.75470 ; support material interface | |
| G1 X-14.890 Y5.574 E1651.77218 ; support material interface | |
| G1 X-8.146 Y4.975 E1652.07150 ; support material interface | |
| G1 X-8.146 Y5.371 E1652.08899 ; support material interface | |
| G1 X-14.890 Y5.969 E1652.38831 ; support material interface | |
| G1 X-14.890 Y6.365 E1652.40579 ; support material interface | |
| G1 X-8.146 Y5.766 E1652.70511 ; support material interface | |
| G1 X-8.146 Y6.162 E1652.72259 ; support material interface | |
| G1 X-14.890 Y6.760 E1653.02192 ; support material interface | |
| G1 X-14.890 Y7.155 E1653.03940 ; support material interface | |
| G1 X-8.146 Y6.557 E1653.33872 ; support material interface | |
| G1 X-8.146 Y6.953 E1653.35620 ; support material interface | |
| G1 X-14.887 Y7.551 E1653.65540 ; support material interface | |
| G1 F2100.000 E1648.65540 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X-18.112 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1653.65540 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y3.879 E1653.80761 F600.000 ; support material interface | |
| G1 X-21.540 Y3.483 E1653.82511 ; support material interface | |
| G1 X-20.600 Y3.400 E1653.86686 ; support material interface | |
| G1 X-20.600 Y3.004 E1653.88436 ; support material interface | |
| G1 X-21.540 Y3.088 E1653.92611 ; support material interface | |
| G1 X-21.540 Y2.692 E1653.94360 ; support material interface | |
| G1 X-20.600 Y2.609 E1653.98535 ; support material interface | |
| G1 X-21.295 Y2.275 E1654.01945 ; support material interface | |
| G1 X-21.540 Y2.297 E1654.03035 ; support material interface | |
| G1 F2100.000 E1649.03035 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1654.03035 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y8.547 E1654.04085 F600.000 ; support material interface | |
| G1 X-21.520 Y13.501 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y9.681 E1655.88361 F600.000 ; support material interface | |
| G1 X21.540 Y9.300 E1655.89986 ; support material interface | |
| G1 X-21.540 Y13.122 E1657.74350 ; support material interface | |
| G1 X-21.540 Y12.740 E1657.75975 ; support material interface | |
| G1 X21.540 Y8.918 E1659.60338 ; support material interface | |
| G1 X21.520 Y8.539 E1659.61958 ; support material interface | |
| G1 X-21.540 Y12.359 E1661.46234 ; support material interface | |
| G1 X-21.540 Y11.978 E1661.47859 ; support material interface | |
| G1 X17.381 Y8.525 E1663.14425 ; support material interface | |
| G1 X16.842 Y7.765 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y7.348 E1663.35256 F600.000 ; support material interface | |
| G1 X21.295 Y7.765 E1663.37392 ; support material interface | |
| G1 X21.540 Y7.743 E1663.38480 ; support material interface | |
| G1 X19.549 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X15.110 Y3.969 E1663.58164 F600.000 ; support material interface | |
| G1 F2100.000 E1658.58164 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X13.950 Y5.841 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1663.58164 F2100.000 ; compensate retraction | |
| G1 X7.873 Y6.380 E1663.84125 F600.000 ; support material interface | |
| G1 X8.064 Y5.982 E1663.86002 ; support material interface | |
| G1 X13.950 Y5.460 E1664.11144 ; support material interface | |
| G1 X13.950 Y5.079 E1664.12764 ; support material interface | |
| G1 X8.256 Y5.585 E1664.37088 ; support material interface | |
| G1 X8.447 Y5.187 E1664.38966 ; support material interface | |
| G1 X13.950 Y4.699 E1664.62472 ; support material interface | |
| G1 X13.950 Y4.318 E1664.64091 ; support material interface | |
| G1 X8.639 Y4.790 E1664.86780 ; support material interface | |
| G1 X8.830 Y4.392 E1664.88657 ; support material interface | |
| G1 X13.950 Y3.938 E1665.10528 ; support material interface | |
| G1 X13.751 Y3.575 E1665.12289 ; support material interface | |
| G1 X9.022 Y3.994 E1665.32493 ; support material interface | |
| G1 X9.213 Y3.597 E1665.34370 ; support material interface | |
| G1 X9.462 Y3.575 E1665.35432 ; support material interface | |
| G1 F2100.000 E1660.35432 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1665.35432 F2100.000 ; compensate retraction | |
| G1 X21.540 Y12.350 E1665.91655 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1665.93280 ; support material interface | |
| G1 X12.700 Y13.515 E1666.31111 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1666.50552 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1666.52564 ; support material interface | |
| G1 X21.540 Y13.493 E1666.53614 ; support material interface | |
| G1 X4.105 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.968 E1667.28227 F600.000 ; support material interface | |
| G1 X21.540 Y11.587 E1667.29852 ; support material interface | |
| G1 X-0.192 Y13.515 E1668.22856 ; support material interface | |
| G1 X-4.489 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.206 E1669.34250 F600.000 ; support material interface | |
| G1 X21.540 Y10.825 E1669.35875 ; support material interface | |
| G1 X-8.787 Y13.515 E1670.65660 ; support material interface | |
| G1 X-13.084 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.443 E1672.13835 F600.000 ; support material interface | |
| G1 X21.540 Y10.062 E1672.15460 ; support material interface | |
| G1 X-17.381 Y13.515 E1673.82026 ; support material interface | |
| G1 F2100.000 E1668.82026 ; retract | |
| G1 Z14.100 F7800.000 ; lift plate during travel | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 Z13.900 F7800.000 ; restore layer Z | |
| G1 E1673.82026 F2100.000 ; compensate retraction | |
| G1 X0.090 Y7.771 E1674.05050 F600.000 ; support material interface | |
| G1 X-4.208 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X-5.290 Y7.868 E1674.09682 F600.000 ; support material interface | |
| M126 ; enable fan | |
| M73 P74 ; update progress | |
| G1 F2100.000 E1669.09682 ; retract | |
| G1 Z14.200 F7800.000 ; move to next layer (137) and lift | |
| G1 X-18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z14.000 F7800.000 ; restore layer Z | |
| G1 E1674.09682 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y-0.169 E1674.12559 F1759.784 ; perimeter | |
| G1 X18.184 Y-0.169 E1674.91288 ; perimeter | |
| G1 X18.184 Y1.159 E1674.94165 ; perimeter | |
| G1 X-18.124 Y1.159 E1675.72765 ; perimeter | |
| G1 X-18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y-0.748 E1675.78146 F1759.784 ; perimeter | |
| G1 X18.763 Y-0.748 E1676.59380 ; perimeter | |
| G1 X18.763 Y1.738 E1676.64762 ; perimeter | |
| G1 X-18.703 Y1.738 E1677.45866 ; perimeter | |
| G1 X-19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y-1.326 E1677.53752 F1759.784 ; perimeter | |
| G1 X19.341 Y-1.326 E1678.37491 ; perimeter | |
| G1 X19.341 Y2.316 E1678.45377 ; perimeter | |
| G1 X-19.281 Y2.316 E1679.28987 ; perimeter | |
| G1 X-19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y-1.805 E1679.35502 F600.000 ; perimeter | |
| G1 X19.820 Y-1.805 E1679.91649 ; perimeter | |
| G1 X19.820 Y2.795 E1679.98164 ; perimeter | |
| G1 X-19.760 Y2.795 E1680.54226 ; perimeter | |
| G1 X-19.620 Y2.449 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1681.71878 F600.000 ; fill | |
| M73 P74 ; update progress | |
| G1 F2100.000 E1676.71878 ; retract | |
| G1 Z14.300 F7800.000 ; move to next layer (138) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z14.100 F7800.000 ; restore layer Z | |
| G1 E1681.71878 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1681.74755 F1759.784 ; perimeter | |
| G1 X-18.184 Y1.159 E1682.53484 ; perimeter | |
| G1 X-18.184 Y-0.169 E1682.56361 ; perimeter | |
| G1 X18.124 Y-0.169 E1683.34961 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1683.40342 F1759.784 ; perimeter | |
| G1 X-18.763 Y1.738 E1684.21576 ; perimeter | |
| G1 X-18.763 Y-0.748 E1684.26958 ; perimeter | |
| G1 X18.703 Y-0.748 E1685.08062 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1685.15948 F1759.784 ; perimeter | |
| G1 X-19.341 Y2.316 E1685.99687 ; perimeter | |
| G1 X-19.341 Y-1.326 E1686.07574 ; perimeter | |
| G1 X19.281 Y-1.326 E1686.91183 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1686.97698 F600.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1687.53845 ; perimeter | |
| G1 X-19.820 Y-1.805 E1687.60360 ; perimeter | |
| G1 X19.760 Y-1.805 E1688.16422 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1689.34074 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P74 ; update progress | |
| G1 F2100.000 E1684.34074 ; retract | |
| G1 Z14.400 F7800.000 ; move to next layer (139) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1689.34074 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1690.12804 F4800.000 ; perimeter | |
| G1 X18.184 Y1.159 E1690.15681 ; perimeter | |
| G1 X-18.184 Y1.159 E1690.94410 ; perimeter | |
| G1 X-18.184 Y-0.109 E1690.97157 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1691.78391 F4800.000 ; perimeter | |
| G1 X18.763 Y1.738 E1691.83772 ; perimeter | |
| G1 X-18.763 Y1.738 E1692.65007 ; perimeter | |
| G1 X-18.763 Y-0.688 E1692.70258 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1693.53998 F4800.000 ; perimeter | |
| G1 X19.341 Y2.316 E1693.61884 ; perimeter | |
| G1 X-19.341 Y2.316 E1694.45623 ; perimeter | |
| G1 X-19.341 Y-1.266 E1694.53379 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1695.09525 F1200.000 ; perimeter | |
| G1 X19.820 Y2.795 E1695.16041 ; perimeter | |
| G1 X-19.820 Y2.795 E1695.72187 ; perimeter | |
| G1 X-19.820 Y-1.745 E1695.78618 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1696.96271 F600.000 ; fill | |
| M73 P75 ; update progress | |
| G1 F2100.000 E1691.96271 ; retract | |
| G1 Z14.400 F7800.000 ; move to next layer (47) and lift | |
| G1 X20.600 Y2.297 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1696.96271 F2100.000 ; compensate retraction | |
| G1 X20.845 Y2.275 E1696.97323 F600.000 ; support material interface | |
| G1 X21.540 Y2.595 E1697.00591 ; support material interface | |
| G1 X20.600 Y2.679 E1697.04623 ; support material interface | |
| G1 X20.600 Y3.061 E1697.06254 ; support material interface | |
| G1 X21.540 Y2.977 E1697.10286 ; support material interface | |
| G1 X21.540 Y3.359 E1697.11918 ; support material interface | |
| G1 X20.600 Y3.443 E1697.15949 ; support material interface | |
| G1 X19.110 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 X14.910 Y3.947 E1697.33958 F600.000 ; support material interface | |
| G1 X14.910 Y4.329 E1697.35590 ; support material interface | |
| G1 X21.540 Y3.741 E1697.64021 ; support material interface | |
| G1 X21.540 Y4.123 E1697.65652 ; support material interface | |
| G1 X14.910 Y4.711 E1697.94083 ; support material interface | |
| G1 X14.910 Y5.093 E1697.95715 ; support material interface | |
| G1 X21.540 Y4.505 E1698.24146 ; support material interface | |
| G1 X21.540 Y4.887 E1698.25778 ; support material interface | |
| G1 X14.910 Y5.475 E1698.54209 ; support material interface | |
| G1 X14.910 Y5.857 E1698.55840 ; support material interface | |
| G1 X21.540 Y5.269 E1698.84271 ; support material interface | |
| G1 X21.540 Y5.651 E1698.85903 ; support material interface | |
| G1 X14.910 Y6.240 E1699.14334 ; support material interface | |
| G1 X14.910 Y6.622 E1699.15966 ; support material interface | |
| G1 X21.540 Y6.033 E1699.44397 ; support material interface | |
| G1 X21.540 Y6.415 E1699.46029 ; support material interface | |
| G1 X14.910 Y7.004 E1699.74460 ; support material interface | |
| G1 X14.910 Y7.386 E1699.76091 ; support material interface | |
| G1 X21.540 Y6.797 E1700.04522 ; support material interface | |
| G1 X21.540 Y7.179 E1700.06154 ; support material interface | |
| G1 X14.914 Y7.767 E1700.34567 ; support material interface | |
| G1 X14.150 Y7.943 F7800.000 ; move to first support material interface point | |
| G1 X13.905 Y7.965 E1700.35665 F600.000 ; support material interface | |
| G1 X14.150 Y7.545 E1700.37836 ; support material interface | |
| G1 X9.411 Y7.965 E1700.59047 ; support material interface | |
| G1 X8.787 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.215 E1701.88832 F600.000 ; support material interface | |
| G1 X-21.540 Y11.597 E1701.90457 ; support material interface | |
| G1 X13.084 Y8.525 E1703.38633 ; support material interface | |
| G1 X14.150 Y7.146 F7800.000 ; move to first support material interface point | |
| G1 X7.207 Y7.762 E1703.69705 F600.000 ; support material interface | |
| G1 X7.408 Y7.345 E1703.71766 ; support material interface | |
| G1 X14.150 Y6.747 E1704.01940 ; support material interface | |
| G1 X14.150 Y6.349 E1704.03718 ; support material interface | |
| G1 X7.608 Y6.929 E1704.32995 ; support material interface | |
| G1 X7.099 Y7.771 F7800.000 ; move to first support material interface point | |
| G1 X4.916 Y7.965 E1704.42762 F600.000 ; support material interface | |
| G1 X4.489 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y10.834 E1705.54156 F600.000 ; support material interface | |
| G1 X-21.540 Y10.453 E1705.55781 ; support material interface | |
| G1 X2.371 Y8.332 E1706.58111 ; support material interface | |
| G1 X2.563 Y7.933 E1706.59995 ; support material interface | |
| G1 X-21.540 Y10.072 E1707.63146 ; support material interface | |
| G1 X-21.540 Y9.690 E1707.64771 ; support material interface | |
| G1 X-8.403 Y8.525 E1708.20993 ; support material interface | |
| G1 X-8.146 Y7.750 F7800.000 ; move to first support material interface point | |
| G1 X-10.575 Y7.965 E1708.31827 F600.000 ; support material interface | |
| G1 F2100.000 E1703.31827 ; retract | |
| G1 Z14.400 F7800.000 ; lift plate during travel | |
| G1 X-12.700 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1708.31827 F2100.000 ; compensate retraction | |
| G1 X-21.540 Y9.309 E1708.69659 F600.000 ; support material interface | |
| G1 X-21.540 Y8.928 E1708.71284 ; support material interface | |
| G1 X-16.997 Y8.525 E1708.90725 ; support material interface | |
| G1 X-15.850 Y7.943 F7800.000 ; move to first support material interface point | |
| G1 X-16.095 Y7.965 E1708.91784 F600.000 ; support material interface | |
| G1 X-15.850 Y7.559 E1708.93825 ; support material interface | |
| G1 X-20.429 Y7.965 E1709.13587 ; support material interface | |
| G1 X-21.295 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y8.547 E1709.14637 F600.000 ; support material interface | |
| G1 X-21.540 Y7.679 F7800.000 ; move to first support material interface point | |
| G1 X-15.850 Y7.174 E1709.39195 F600.000 ; support material interface | |
| G1 X-15.850 Y6.790 E1709.40848 ; support material interface | |
| G1 X-21.540 Y7.295 E1709.65405 ; support material interface | |
| G1 X-21.540 Y6.910 E1709.67058 ; support material interface | |
| G1 X-15.850 Y6.405 E1709.91615 ; support material interface | |
| G1 X-15.850 Y6.021 E1709.93268 ; support material interface | |
| G1 X-21.540 Y6.526 E1710.17826 ; support material interface | |
| G1 X-21.540 Y6.141 E1710.19478 ; support material interface | |
| G1 X-15.850 Y5.637 E1710.44036 ; support material interface | |
| G1 X-15.850 Y5.252 E1710.45689 ; support material interface | |
| G1 X-21.540 Y5.757 E1710.70246 ; support material interface | |
| G1 X-21.540 Y5.372 E1710.71899 ; support material interface | |
| G1 X-15.850 Y4.868 E1710.96456 ; support material interface | |
| G1 X-15.850 Y4.483 E1710.98109 ; support material interface | |
| G1 X-21.540 Y4.988 E1711.22666 ; support material interface | |
| G1 X-21.540 Y4.603 E1711.24319 ; support material interface | |
| G1 X-15.850 Y4.099 E1711.48877 ; support material interface | |
| G1 X-15.859 Y3.715 E1711.50526 ; support material interface | |
| G1 X-21.540 Y4.219 E1711.75044 ; support material interface | |
| G1 X-21.540 Y3.835 E1711.76696 ; support material interface | |
| G1 X-18.613 Y3.575 E1711.89327 ; support material interface | |
| G1 X-20.600 Y3.367 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y3.450 E1711.93385 F600.000 ; support material interface | |
| G1 X-21.540 Y3.066 E1711.95037 ; support material interface | |
| G1 X-20.600 Y2.982 E1711.99095 ; support material interface | |
| G1 X-20.600 Y2.598 E1712.00748 ; support material interface | |
| G1 X-21.540 Y2.681 E1712.04806 ; support material interface | |
| G1 X-21.540 Y2.297 E1712.06458 ; support material interface | |
| G1 X-21.295 Y2.275 E1712.07518 ; support material interface | |
| G1 F2100.000 E1707.07518 ; retract | |
| G1 Z14.400 F7800.000 ; lift plate during travel | |
| G1 X-14.845 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1712.07518 F2100.000 ; compensate retraction | |
| G1 X-15.090 Y3.597 E1712.08612 F600.000 ; support material interface | |
| G1 X-15.090 Y3.994 E1712.10378 ; support material interface | |
| G1 X-10.365 Y3.575 E1712.31458 ; support material interface | |
| G1 X-8.337 Y3.792 F7800.000 ; move to first support material interface point | |
| G1 X-15.090 Y4.392 E1712.61585 F600.000 ; support material interface | |
| G1 X-15.090 Y4.789 E1712.63351 ; support material interface | |
| G1 X-8.146 Y4.173 E1712.94327 ; support material interface | |
| G1 X-8.146 Y4.570 E1712.96093 ; support material interface | |
| G1 X-15.090 Y5.186 E1713.27070 ; support material interface | |
| G1 X-15.090 Y5.584 E1713.28836 ; support material interface | |
| G1 X-8.146 Y4.968 E1713.59812 ; support material interface | |
| G1 X-8.146 Y5.365 E1713.61578 ; support material interface | |
| G1 X-15.090 Y5.981 E1713.92554 ; support material interface | |
| G1 X-15.090 Y6.379 E1713.94320 ; support material interface | |
| G1 X-8.146 Y5.763 E1714.25296 ; support material interface | |
| G1 X-8.146 Y6.160 E1714.27062 ; support material interface | |
| G1 X-15.090 Y6.776 E1714.58038 ; support material interface | |
| G1 X-15.090 Y7.173 E1714.59804 ; support material interface | |
| G1 X-8.146 Y6.557 E1714.90781 ; support material interface | |
| G1 X-8.146 Y6.955 E1714.92547 ; support material interface | |
| G1 X-15.090 Y7.571 E1715.23523 ; support material interface | |
| G1 X-15.055 Y7.965 E1715.25282 ; support material interface | |
| G1 X-8.146 Y7.352 E1715.56100 ; support material interface | |
| G1 F2100.000 E1710.56100 ; retract | |
| G1 Z14.400 F7800.000 ; lift plate during travel | |
| G1 X-6.095 Y7.965 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1715.56100 F2100.000 ; compensate retraction | |
| G1 X-5.856 Y7.944 E1715.57166 F600.000 ; support material interface | |
| G1 X-5.290 Y7.868 F7800.000 ; move to first support material interface point | |
| G1 X-4.208 Y7.771 E1715.61799 F600.000 ; support material interface | |
| G1 X-5.290 Y8.249 F7800.000 ; move to first support material interface point | |
| G1 X0.090 Y7.771 E1715.84822 F600.000 ; support material interface | |
| G1 X-0.192 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y11.587 E1716.77826 F600.000 ; support material interface | |
| G1 X21.540 Y11.968 E1716.79451 ; support material interface | |
| G1 X4.105 Y13.515 E1717.54064 ; support material interface | |
| G1 X8.403 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y12.350 E1718.10286 F600.000 ; support material interface | |
| G1 X21.540 Y12.731 E1718.11911 ; support material interface | |
| G1 X12.700 Y13.515 E1718.49743 ; support material interface | |
| G1 X16.997 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y13.112 E1718.69184 F600.000 ; support material interface | |
| G1 X21.295 Y13.515 E1718.71195 ; support material interface | |
| G1 X21.540 Y13.493 E1718.72246 ; support material interface | |
| G1 F2100.000 E1713.72246 ; retract | |
| G1 Z14.400 F7800.000 ; lift plate during travel | |
| G1 X21.540 Y7.943 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1718.72246 F2100.000 ; compensate retraction | |
| G1 X21.295 Y7.965 E1718.73298 F600.000 ; support material interface | |
| G1 X21.540 Y7.561 E1718.75316 ; support material interface | |
| G1 X16.989 Y7.965 E1718.94833 ; support material interface | |
| G1 X17.381 Y8.525 F7800.000 ; move to first support material interface point | |
| G1 X-21.540 Y11.978 E1720.61399 F600.000 ; support material interface | |
| G1 X-21.540 Y12.359 E1720.63024 ; support material interface | |
| G1 X21.520 Y8.539 E1722.47300 ; support material interface | |
| G1 X21.540 Y8.918 E1722.48920 ; support material interface | |
| G1 X-21.540 Y12.740 E1724.33284 ; support material interface | |
| G1 X-21.540 Y13.122 E1724.34909 ; support material interface | |
| G1 X21.540 Y9.300 E1726.19272 ; support material interface | |
| G1 X21.540 Y9.681 E1726.20897 ; support material interface | |
| G1 X-21.520 Y13.501 E1728.05173 ; support material interface | |
| G1 X-17.381 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.062 E1729.71739 F600.000 ; support material interface | |
| G1 X21.540 Y10.443 E1729.73364 ; support material interface | |
| G1 X-13.084 Y13.515 E1731.21540 ; support material interface | |
| G1 X-8.787 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X21.540 Y10.825 E1732.51324 F600.000 ; support material interface | |
| G1 X21.540 Y11.206 E1732.52950 ; support material interface | |
| G1 X-4.489 Y13.515 E1733.64344 ; support material interface | |
| G1 F2100.000 E1728.64344 ; retract | |
| G1 Z14.400 F7800.000 ; lift plate during travel | |
| G1 X9.462 Y3.575 F7800.000 ; move to first support material interface point | |
| G1 Z14.200 F7800.000 ; restore layer Z | |
| G1 E1733.64344 F2100.000 ; compensate retraction | |
| G1 X9.213 Y3.597 E1733.65456 F600.000 ; support material interface | |
| G1 X9.013 Y4.013 E1733.67517 ; support material interface | |
| G1 X13.956 Y3.575 E1733.89641 ; support material interface | |
| G1 X14.150 Y3.956 E1733.91549 ; support material interface | |
| G1 X8.812 Y4.430 E1734.15439 ; support material interface | |
| G1 X8.611 Y4.846 E1734.17500 ; support material interface | |
| G1 X14.150 Y4.355 E1734.42288 ; support material interface | |
| G1 X14.150 Y4.754 E1734.44066 ; support material interface | |
| G1 X8.411 Y5.263 E1734.69752 ; support material interface | |
| G1 X8.210 Y5.679 E1734.71812 ; support material interface | |
| G1 X14.150 Y5.152 E1734.98396 ; support material interface | |
| G1 X14.150 Y5.551 E1735.00173 ; support material interface | |
| G1 X8.010 Y6.096 E1735.27655 ; support material interface | |
| G1 X7.809 Y6.512 E1735.29715 ; support material interface | |
| G1 X14.150 Y5.950 E1735.58095 ; support material interface | |
| M126 ; enable fan | |
| M73 P75 ; update progress | |
| G1 F2100.000 E1730.58095 ; retract | |
| G1 Z14.500 F7800.000 ; move to next layer (140) and lift | |
| G1 X18.184 Y1.159 F7800.000 ; move to first perimeter point | |
| G1 Z14.300 F7800.000 ; restore layer Z | |
| G1 E1735.58095 F2100.000 ; compensate retraction | |
| G1 X-18.184 Y1.159 E1736.36824 F1759.784 ; perimeter | |
| G1 X-18.184 Y-0.169 E1736.39701 ; perimeter | |
| G1 X18.184 Y-0.169 E1737.18430 ; perimeter | |
| G1 X18.184 Y1.099 E1737.21177 ; perimeter | |
| G1 X18.763 Y1.738 F7800.000 ; move to first perimeter point | |
| G1 X-18.763 Y1.738 E1738.02411 F1759.784 ; perimeter | |
| G1 X-18.763 Y-0.748 E1738.07793 ; perimeter | |
| G1 X18.763 Y-0.748 E1738.89027 ; perimeter | |
| G1 X18.763 Y1.678 E1738.94278 ; perimeter | |
| G1 X19.341 Y2.316 F7800.000 ; move to first perimeter point | |
| G1 X-19.341 Y2.316 E1739.78018 F1759.784 ; perimeter | |
| G1 X-19.341 Y-1.326 E1739.85904 ; perimeter | |
| G1 X19.341 Y-1.326 E1740.69643 ; perimeter | |
| G1 X19.341 Y2.256 E1740.77399 ; perimeter | |
| G1 X19.820 Y2.795 F7800.000 ; move to first perimeter point | |
| G1 X-19.820 Y2.795 E1741.33546 F600.000 ; perimeter | |
| G1 X-19.820 Y-1.805 E1741.40061 ; perimeter | |
| G1 X19.820 Y-1.805 E1741.96207 ; perimeter | |
| G1 X19.820 Y2.735 E1742.02638 ; perimeter | |
| G1 X19.474 Y2.595 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1743.20291 F600.000 ; fill | |
| M73 P76 ; update progress | |
| G1 F2100.000 E1738.20291 ; retract | |
| G1 Z14.600 F7800.000 ; move to next layer (141) and lift | |
| G1 X-18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z14.400 F7800.000 ; restore layer Z | |
| G1 E1743.20291 F2100.000 ; compensate retraction | |
| G1 X18.184 Y-0.169 E1743.99020 F1759.784 ; perimeter | |
| G1 X18.184 Y1.159 E1744.01897 ; perimeter | |
| G1 X-18.184 Y1.159 E1744.80626 ; perimeter | |
| G1 X-18.184 Y-0.109 E1744.83373 ; perimeter | |
| G1 X-18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y-0.748 E1745.64607 F1759.784 ; perimeter | |
| G1 X18.763 Y1.738 E1745.69989 ; perimeter | |
| G1 X-18.763 Y1.738 E1746.51223 ; perimeter | |
| G1 X-18.763 Y-0.688 E1746.56475 ; perimeter | |
| G1 X-19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y-1.326 E1747.40214 F1759.784 ; perimeter | |
| G1 X19.341 Y2.316 E1747.48100 ; perimeter | |
| G1 X-19.341 Y2.316 E1748.31839 ; perimeter | |
| G1 X-19.341 Y-1.266 E1748.39595 ; perimeter | |
| G1 X-19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y-1.805 E1748.95742 F600.000 ; perimeter | |
| G1 X19.820 Y2.795 E1749.02257 ; perimeter | |
| G1 X-19.820 Y2.795 E1749.58403 ; perimeter | |
| G1 X-19.820 Y-1.745 E1749.64834 ; perimeter | |
| G1 X-19.474 Y-1.605 F7800.000 ; move inwards before travel | |
| G1 X-17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X17.895 Y0.495 E1750.82487 F600.000 ; fill | |
| M127 ; disable fan | |
| M73 P76 ; update progress | |
| G1 F2100.000 E1745.82487 ; retract | |
| G1 Z14.700 F7800.000 ; move to next layer (142) and lift | |
| G1 X18.184 Y-0.169 F7800.000 ; move to first perimeter point | |
| G1 Z14.500 F7800.000 ; restore layer Z | |
| G1 E1750.82487 F2100.000 ; compensate retraction | |
| G1 X18.184 Y1.159 E1750.85363 F4800.000 ; perimeter | |
| G1 X-18.184 Y1.159 E1751.64093 ; perimeter | |
| G1 X-18.184 Y-0.169 E1751.66969 ; perimeter | |
| G1 X18.124 Y-0.169 E1752.45569 ; perimeter | |
| G1 X18.763 Y-0.748 F7800.000 ; move to first perimeter point | |
| G1 X18.763 Y1.738 E1752.50950 F4800.000 ; perimeter | |
| G1 X-18.763 Y1.738 E1753.32185 ; perimeter | |
| G1 X-18.763 Y-0.748 E1753.37566 ; perimeter | |
| G1 X18.703 Y-0.748 E1754.18671 ; perimeter | |
| G1 X19.341 Y-1.326 F7800.000 ; move to first perimeter point | |
| G1 X19.341 Y2.316 E1754.26557 F4800.000 ; perimeter | |
| G1 X-19.341 Y2.316 E1755.10296 ; perimeter | |
| G1 X-19.341 Y-1.326 E1755.18182 ; perimeter | |
| G1 X19.281 Y-1.326 E1756.01791 ; perimeter | |
| G1 X19.820 Y-1.805 F7800.000 ; move to first perimeter point | |
| G1 X19.820 Y2.795 E1756.08307 F1200.000 ; perimeter | |
| G1 X-19.820 Y2.795 E1756.64453 ; perimeter | |
| G1 X-19.820 Y-1.805 E1756.70969 ; perimeter | |
| G1 X19.760 Y-1.805 E1757.27030 ; perimeter | |
| G1 X19.620 Y-1.459 F7800.000 ; move inwards before travel | |
| G1 X17.895 Y0.495 F7800.000 ; move to first fill point | |
| G1 X-17.895 Y0.495 E1758.44683 F600.000 ; fill | |
| M73 P76 ; update progress | |
| G1 F2100.000 E1753.44683 ; retract | |
| G1 Z14.700 F7800.000 ; move to next layer (48) and lift | |
| G1 X-17.544 Y4.409 F7800.000 ; move to first support material interface point | |
| G1 Z14.500 F7800.000 ; restore layer Z | |
| G1 E1758.44683 F2100.000 ; compensate retraction | |
| G1 X-17.960 Y4.446 E1758.46499 F600.000 ; support material interface | |
| G1 X-19.104 Y4.547 F7800.000 ; move to first support material interface point | |
| G1 X-20.403 Y4.662 E1758.52168 F600.000 ; support material interface | |
| G1 X-19.544 Y4.197 F7800.000 ; move to first support material interface point | |
| G1 X-19.498 Y4.193 E1758.52371 F600.000 ; support material interface | |
| G1 F2100.000 E1753.52371 ; retract | |
| G1 Z14.700 F7800.000 ; lift plate during travel | |
| G1 X-21.520 Y3.759 F7800.000 ; move to first support material interface point | |
| G1 Z14.500 F7800.000 ; restore layer Z | |
| G1 E1758.52371 F2100.000 ; compensate retraction | |
| G1 X-21.220 Y3.759 E1758.52796 F600.000 ; support material interface | |
| G1 X-20.920 Y4.278 E1758.53645 ; support material interface | |
| G1 X-21.220 Y4.798 E1758.54495 ; support material interface | |
| G1 X-21.520 Y4.798 E1758.54920 ; support material interface | |
| G1 X-21.520 Y5.559 F7800.000 ; move to first support material interface point | |
| G1 X-21.220 Y5.559 E1758.55345 F600.000 ; support material interface | |
| G1 X-20.920 Y6.078 E1758.56195 ; support material interface | |
| G1 X-21.220 Y6.598 E1758.57045 ; support material interface | |
| G1 X-21.520 Y6.598 E1758.57470 ; support material interface | |
| G1 X-21.520 Y7.359 F7800.000 ; move to first support material interface point | |
| G1 X-21.220 Y7.359 E1758.57895 F600.000 ; support material interface | |
| G1 X-20.920 Y7.878 E1758.58744 ; support material interface | |
| G1 X-21.220 Y8.398 E1758.59594 ; support material interface | |
| G1 X-21.520 Y8.398 E1758.60019 ; support material interface | |
| G1 X-21.520 Y9.159 F7800.000 ; move to first support material interface point | |
| G1 X-21.220 Y9.159 E1758.60444 F600.000 ; support material interface | |
| G1 X-20.920 Y9.678 E1758.61294 ; support material interface | |
| G1 X-21.220 Y10.198 E1758.62144 ; support material interface | |
| G1 X-21.520 Y10.198 E1758.62569 ; support material interface | |
| G1 X-21.520 Y10.959 F7800.000 ; move to first support material interface point | |
| G1 X-21.220 Y10.959 E1758.62994 F600.000 ; support material interface | |
| G1 X-20.920 Y11.478 E1758.63844 ; support material interface | |
| G1 X-21.220 Y11.998 E1758.64693 ; support material interface | |
| G1 X-21.520 Y11.998 E1758.65118 ; support material interface | |
| G1 X-21.520 Y12.759 F7800.000 ; move to first support material interface point | |
| G1 X-21.220 Y12.759 E1758.65543 F600.000 ; support material interface | |
| G1 X-20.920 Y13.278 E1758.66393 ; support material interface | |
| G1 X-21.045 Y13.495 E1758.66747 ; support material interface | |
| G1 X-21.045 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-21.270 Y13.515 E1758.67709 F600.000 ; support material interface | |
| G1 X-20.537 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-20.237 Y12.975 E1758.68559 F600.000 ; support material interface | |
| G1 X-19.637 Y12.975 E1758.69409 ; support material interface | |
| G1 X-19.337 Y13.495 E1758.70259 ; support material interface | |
| G1 X-18.962 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-18.736 Y13.495 E1758.71221 F600.000 ; support material interface | |
| G1 X-18.737 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-18.437 Y12.975 E1758.72070 F600.000 ; support material interface | |
| G1 X-17.837 Y12.975 E1758.72920 ; support material interface | |
| G1 X-17.537 Y13.495 E1758.73770 ; support material interface | |
| G1 X-17.162 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-16.936 Y13.495 E1758.74732 F600.000 ; support material interface | |
| G1 X-16.937 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-16.637 Y12.975 E1758.75582 F600.000 ; support material interface | |
| G1 X-16.037 Y12.975 E1758.76432 ; support material interface | |
| G1 X-15.737 Y13.495 E1758.77282 ; support material interface | |
| G1 X-15.362 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-15.136 Y13.495 E1758.78244 F600.000 ; support material interface | |
| G1 X-15.137 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-14.837 Y12.975 E1758.79093 F600.000 ; support material interface | |
| G1 X-14.237 Y12.975 E1758.79943 ; support material interface | |
| G1 X-13.937 Y13.495 E1758.80793 ; support material interface | |
| G1 X-13.562 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-13.336 Y13.495 E1758.81755 F600.000 ; support material interface | |
| G1 X-13.337 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-13.037 Y12.975 E1758.82605 F600.000 ; support material interface | |
| G1 X-12.437 Y12.975 E1758.83455 ; support material interface | |
| G1 X-12.137 Y13.495 E1758.84305 ; support material interface | |
| G1 X-11.762 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-11.536 Y13.495 E1758.85267 F600.000 ; support material interface | |
| G1 X-11.537 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-11.237 Y12.975 E1758.86116 F600.000 ; support material interface | |
| G1 X-10.637 Y12.975 E1758.86966 ; support material interface | |
| G1 X-10.337 Y13.495 E1758.87816 ; support material interface | |
| G1 X-9.962 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-9.736 Y13.495 E1758.88778 F600.000 ; support material interface | |
| G1 X-9.737 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-9.437 Y12.975 E1758.89628 F600.000 ; support material interface | |
| G1 X-8.837 Y12.975 E1758.90478 ; support material interface | |
| G1 X-8.537 Y13.495 E1758.91328 ; support material interface | |
| G1 X-8.162 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-7.936 Y13.495 E1758.92290 F600.000 ; support material interface | |
| G1 X-7.937 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-7.637 Y12.975 E1758.93139 F600.000 ; support material interface | |
| G1 X-7.037 Y12.975 E1758.93989 ; support material interface | |
| G1 X-6.737 Y13.495 E1758.94839 ; support material interface | |
| G1 X-6.362 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-6.136 Y13.495 E1758.95801 F600.000 ; support material interface | |
| G1 X-6.137 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-5.837 Y12.975 E1758.96651 F600.000 ; support material interface | |
| G1 X-5.237 Y12.975 E1758.97501 ; support material interface | |
| G1 X-4.937 Y13.495 E1758.98351 ; support material interface | |
| G1 X-4.562 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-4.336 Y13.495 E1758.99313 F600.000 ; support material interface | |
| G1 X-4.337 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-4.037 Y12.975 E1759.00162 F600.000 ; support material interface | |
| G1 X-3.437 Y12.975 E1759.01012 ; support material interface | |
| G1 X-3.137 Y13.495 E1759.01862 ; support material interface | |
| G1 X-2.762 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-2.536 Y13.495 E1759.02824 F600.000 ; support material interface | |
| G1 X-2.537 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-2.237 Y12.975 E1759.03674 F600.000 ; support material interface | |
| G1 X-1.637 Y12.975 E1759.04524 ; support material interface | |
| G1 X-1.337 Y13.495 E1759.05374 ; support material interface | |
| G1 X-0.962 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X-0.736 Y13.495 E1759.06335 F600.000 ; support material interface | |
| G1 X-0.737 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X-0.437 Y12.975 E1759.07185 F600.000 ; support material interface | |
| G1 X0.163 Y12.975 E1759.08035 ; support material interface | |
| G1 X0.463 Y13.495 E1759.08885 ; support material interface | |
| G1 X0.838 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X1.064 Y13.495 E1759.09847 F600.000 ; support material interface | |
| G1 X1.063 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X1.363 Y12.975 E1759.10697 F600.000 ; support material interface | |
| G1 X1.963 Y12.975 E1759.11547 ; support material interface | |
| G1 X2.263 Y13.495 E1759.12396 ; support material interface | |
| G1 X2.638 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X2.864 Y13.495 E1759.13358 F600.000 ; support material interface | |
| G1 X2.863 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X3.163 Y12.975 E1759.14208 F600.000 ; support material interface | |
| G1 X3.763 Y12.975 E1759.15058 ; support material interface | |
| G1 X4.063 Y13.495 E1759.15908 ; support material interface | |
| G1 X4.438 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X4.664 Y13.495 E1759.16870 F600.000 ; support material interface | |
| G1 X4.663 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X4.963 Y12.975 E1759.17720 F600.000 ; support material interface | |
| G1 X5.563 Y12.975 E1759.18570 ; support material interface | |
| G1 X5.863 Y13.495 E1759.19419 ; support material interface | |
| G1 X6.238 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X6.464 Y13.495 E1759.20381 F600.000 ; support material interface | |
| G1 X6.463 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X6.763 Y12.975 E1759.21231 F600.000 ; support material interface | |
| G1 X7.363 Y12.975 E1759.22081 ; support material interface | |
| G1 X7.663 Y13.495 E1759.22931 ; support material interface | |
| G1 X8.038 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X8.264 Y13.495 E1759.23893 F600.000 ; support material interface | |
| G1 X8.263 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X8.563 Y12.975 E1759.24743 F600.000 ; support material interface | |
| G1 X9.163 Y12.975 E1759.25593 ; support material interface | |
| G1 X9.463 Y13.495 E1759.26442 ; support material interface | |
| G1 X9.838 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X10.064 Y13.495 E1759.27404 F600.000 ; support material interface | |
| G1 X10.063 Y13.495 F7800.000 ; move to first support material interface point | |
| G1 X10.363 Y12.975 E1759.28254 F600.000 ; support material interface | |
| G1 X10.963 Y12.975 E1759.29104 ; support material interface | |
| G1 X11.263 Y13.495 E1759.29954 ; support material interface | |
| G1 X11.638 Y13.515 F7800.000 ; move to first support material interface point | |
| G1 X11.864 Y13.495 E1759.30916 F600.000 ; support material interface | |
| G1 X11.863 Y13.495 F7800.000 ; move to first support material interface point |