iosdev747

Install TrueNAS SCALE on a partition instead of the full disk

The TrueNAS installer doesn't have a way to use anything less than the full device. This is usually a waste of resources when installing to a modern NVMe which is usually several hundred of GB. TrueNAS SCALE will use only a few GB for its system files so installing to a 16GB partition would be helpful.

Unfortunately this is only possible by using an intermediate device to act as the installation disk and later move this data to the NVMe.

dschense

Copy nssm.exe to same directory that rclone is in. I launched NSSM, by opening an elevated command line. Type cmd in the search bar and right click and choose “run as administrator.”

1. cd c:\rclone (or wherever you have rclone located)
2. nssm install “Rclone Mount”
3. Fill in the info below
4. Still in the command prompt, type services.msc
5. Scroll down and choose your service and right click and start it.
6. If it fails to start, stop the service
7. Go back to command prompt and run sc.exe delete “Rclone Mount”
8. Enter the command from step 2 above and repeat until you complete everything with no typos and it works.

iosdev747

Anshul Singh's Google Summer of Code 2019 Final report

Organisation: Mifos Initiative

Project Name: Mifos/Fineract Chatbot & Adapter 2.0

Mentors: Aleksandar Vidakovic, Raul Sibaja, Ramit Sawhney

Project github repository link: master branch

Pull Request made during GSoC: Pull Request

Project tree of my work: here

Overview

mauri870

After a weekend of research, stress and pain I finally figure out how to install manjaro 17 and configure the nvidia/bumblebee drivers on my avell laptop

Here's my notebook specs:

$ inxi -MGCNA

Machine:   Device: laptop System: Avell High Performance product: 1513
           Mobo: N/A model: N/A v: 0.1 UEFI: American Megatrends v: N.1.02 date: 09/28/2016
Battery    BAT0: charge: 44.0 Wh 100.0% condition: 44.0/44.0 Wh (100%)