Skip to content

Instantly share code, notes, and snippets.

Paul Keith javelinanddart

Block or report user

Report or block javelinanddart

Hide content and notifications from this user.

Learn more about blocking users

Contact Support about this user’s behavior.

Learn more about reporting abuse

Report abuse
View GitHub Profile
View pp_calib_data_NBQ_CTC52_OTM1926c_1080p_command_mode_panel.xml
<?xml version="1.0" ?>
<!--Copyright (c) 2014 Qualcomm Technologies, Inc. All Rights Reserved.
Qualcomm Technologies Proprietary and Confidential.-->
<Calib_Data>
<Raw_Luts Data_Size="656" Type="PCC Lut">
<Color_Temp>0xc1a00000, 0xc1980000, 0xc1900000, 0xc1880000, 0xc1800000, 0xc1700000, 0xc1600000, 0xc1500000, 0xc1400000, 0xc1300000, 0xc1200000, 0xc1100000, 0xc1000000, 0xc0e00000, 0xc0c00000, 0xc0a00000, 0xc0800000, 0xc0400000, 0xc0000000, 0xbf800000, 0x00000000, 0x3f800000, 0x40000000, 0x40400000, 0x40800000, 0x40a00000, 0x40c00000, 0x40e00000, 0x41000000, 0x41100000, 0x41200000, 0x41300000, 0x41400000, 0x41500000, 0x41600000, 0x41700000, 0x41800000, 0x41880000, 0x41900000, 0x41980000, 0x41a00000,</Color_Temp>
<Red>0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f800000, 0x3f726b83, 0x3f6a0cbf, 0x3f5e94cd, 0
View console-ramoops-0
[ 10.683074s][pid:0,cpu0,swapper]func: bfm_early_parse_bootlock_cmdline line: 55, bootlock=unlocked
[ 10.683074s][pid:0,cpu0,swapper]func: early_parse_bfmr_enable_flag line: 77, hw_bfm_enable=1
[ 10.683105s][pid:0,cpu0,swapper]func: early_parse_bfr_enable_flag line: 97, hw_bfr_enable=1
[ 10.683135s][pid:0,cpu0,swapper][diag_BbpDrxDdrEnable] not enable!
[ 10.687530s][pid:0,cpu0,swapper]secsg: hisi_sec_cma_set_up init cma:rmem->base:0x5a000000,size:0x26000000,cmaname:hisi-cma-pool, secsg_cma_num:0
[ 10.687530s][pid:0,cpu0,swapper]secsg: hisi_sec_cma_set_up,cma reg to dma_camera_cma
[ 10.886749s][pid:0,cpu0,swapper/0]xfreq_clk_table_init: sizeof freq and volt in device tree illegal!, k = 8
[ 11.435668s][pid:0,cpu0,swapper/0][hisi_bootup_keypoint]:<bbox fail>value[99] is invilad.
[ 11.436401s][pid:0,cpu0,swapper/0][hisi_bootup_keypoint]:<bbox fail>value[101] is invilad.
[ 11.469268s][pid:1,cpu0,swapper/0]/interrupt-controller@f7000000: Unable to locate ITS domain
View console-ramoops-0
[ 9.736968s][pid:0,cpu0,swapper]func: bfm_early_parse_bootlock_cmdline line: 55, bootlock=unlocked
[ 9.736968s][pid:0,cpu0,swapper]func: early_parse_bfmr_enable_flag line: 77, hw_bfm_enable=1
[ 9.736999s][pid:0,cpu0,swapper]func: early_parse_bfr_enable_flag line: 97, hw_bfr_enable=1
[ 9.737030s][pid:0,cpu0,swapper][diag_BbpDrxDdrEnable] not enable!
[ 9.741424s][pid:0,cpu0,swapper]secsg: hisi_sec_cma_set_up init cma:rmem->base:0x5a000000,size:0x26000000,cmaname:hisi-cma-pool, secsg_cma_num:0
[ 9.741424s][pid:0,cpu0,swapper]secsg: hisi_sec_cma_set_up,cma reg to dma_camera_cma
[ 9.940673s][pid:0,cpu0,swapper/0]xfreq_clk_table_init: sizeof freq and volt in device tree illegal!, k = 8
[ 10.491760s][pid:0,cpu0,swapper/0][hisi_bootup_keypoint]:<bbox fail>value[99] is invilad.
[ 10.492492s][pid:0,cpu0,swapper/0][hisi_bootup_keypoint]:<bbox fail>value[101] is invilad.
[ 10.525421s][pid:1,cpu0,swapper/0]/interrupt-controller@f7000000: Unable to locate ITS domain
View config
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.9.97 Kernel Configuration
#
CONFIG_ARM64=y
CONFIG_64BIT=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_DEBUG_RODATA=y
CONFIG_ARM64_PAGE_SHIFT=12
View 0001-hlte-common-audio-Override-pcm_id-for-USECASE_VOICE2.patch
From d91907ea59bfe7cb7d1cce5e06a80b60bc3c920a Mon Sep 17 00:00:00 2001
From: Paul Keith <javelinanddart@gmail.com>
Date: Thu, 26 Apr 2018 15:47:34 +0200
Subject: [PATCH 1/1] hlte-common: audio: Override pcm_id for
USECASE_VOICE2_CALL
* Samsung appears to use PCM ID 43 for USECASE_VOICE2_CALL on stock
* The tipoff for an incorrect PCM ID was that the audio HAL was
complaining about being unable to open /dev/snd/pcmC0D22p
because of an invalid argument, even though the device existed
View CSMAT.py
f=open("ICMAT.txt")
g=open("CSMAT.txt", "a")
matrix=[]
connections=[]
def clearmat(r,s):
out=[]
for x in range (r):
View playing
Mixer name: 'msm8994-tomtom-mtp-snd-card'
Number of controls: 964
ctl type num name value
0 INT 3 Voice Rx Device Mute -1 -1 -1
1 INT 3 Voice Tx Device Mute -1 -1 -1
2 INT 3 Voice Tx Mute -1 -1 -1
3 INT 3 Voice Rx Gain -1 -1 -1
4 ENUM 1 TTY Mode OFF
5 INT 2 Slowtalk Enable -1 -1
View console-ramoops-0
This file has been truncated, but you can view the full file.
d to debug)
[ 2026.175772] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[ 2026.277077] PM: suspend of devices complete after 128.736 msecs
[ 2026.279325] PM: late suspend of devices complete after 2.225 msecs
[ 2026.282246] PM: noirq suspend of devices complete after 2.909 msecs
[ 2026.282262] Disabling non-boot CPUs ...
[ 2026.301115] CPU0:msm_cpu_pm_enter_sleep mode:3 during suspend
[ 2026.301115] Suspended for 0.000 seconds
[ 2026.301951] Enabling non-boot CPUs ...
View dumpsys_sensorservice
Sensor Device:
Total 39 h/w sensors, 39 running:
0x00000014) active-count = 1; sampling_period(ms) = {1.0}, selected = 1.00 ms; batching_period(ms) = {0.0}, selected = 0.00 ms
Sensor List:
0x00000001) BMA2X2 Accelerometer/Temperature/Double-tap | BOSCH | ver: 1 | type: android.sensor.accelerometer(1) | perm: n/a | flags: 0x00000000
continuous | minRate=1.00Hz | maxRate=200.00Hz | FIFO (max,reserved) = (10000, 0) events | non-wakeUp |
0x00000002) BMM150 Magnetometer | BOSCH | ver: 1 | type: android.sensor.magnetic_field(2) | perm: n/a | flags: 0x00000000
continuous | minRate=1.00Hz | maxRate=100.00Hz | FIFO (max,reserved) = (1000, 0) events | non-wakeUp |
0x00000003) BMM150 Magnetometer Uncalibrated | BOSCH | ver: 1 | type: android.sensor.magnetic_field_uncalibrated(14) | perm: n/a | flags: 0x00000000
continuous | minRate=1.00Hz | maxRate=100.00Hz | FIFO (max,reserved) = (1000, 0) events | non-wakeUp |
View console-ramoops-0
This file has been truncated, but you can view the full file.
ca64ff80, p = ffffffc021b7a1c0, current = ffffffc0c41cad00
[ 67.903985] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[ 67.907009] cnss: runtime suspend status: 0
[ 67.969100] _cpu_up: attempt to bring up CPU 4 failed
[ 67.972073] [sched_delayed] try_to_wake_up_local: Failed to wakeup task 4 (kworker/0:0), rq = ffffffc0ca64ff80, this_rq = ffffffc0ca631f80, p = ffffffc021b7a1c0, current = ffffffc0c41cad00
[ 67.985486] cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[ 67.985655] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[ 67.988743] [sched_delayed] try_to_wake_up_local: Failed to wakeup task 4 (kworker/0:0), rq = ffffffc0ca64ff80, this_rq = ffffffc0ca640f80, p = ffffffc021b7a1c0, current = ffffffc0c41cad00
[ 67.992072] [sched_delayed] try_to_wake_up_local: Failed to wakeup task 4 (kworker/0:0), rq = ffffffc0ca64ff80, this_rq = ffffffc0ca640f80, p = ffffffc021b7a1c0, current = ffffffc0c41cad00
You can’t perform that action at this time.