test4_2_debug.log

[process.C:8513-U] - Setting thread mode to HandlerThreading
[process.C:8534-U] - New state uses handler threading, running handler thread
[handler.C:100-U] - Handler Bootstrap will handle event Bootstrap
[handler.C:100-U] - Handler Callback will handle event Bootstrap
[handler.C:100-U] - Handler Signal will handle event Signal
[handler.C:100-U] - Handler Callback will handle event Signal
[handler.C:100-U] - Handler Post Exit will handle event post-Exit
[handler.C:100-U] - Handler Callback will handle event post-Exit
[handler.C:100-U] - Handler Post Exit Cleanup will handle event post-Exit
[handler.C:100-U] - Handler Callback will handle event post-Exit
[handler.C:100-U] - Handler Post Exit Cleanup will handle event Crash
[handler.C:100-U] - Handler Callback will handle event Crash
[handler.C:100-U] - Handler Pre Exit will handle event pre-Exit
[handler.C:100-U] - Handler Callback will handle event pre-Exit
[handler.C:100-U] - Handler Thread Create will handle event ThreadCreate
[handler.C:100-U] - Handler Callback will handle event ThreadCreate
[handler.C:100-U] - Handler Thread Create will handle event UserThreadCreate
[handler.C:100-U] - Handler Callback will handle event UserThreadCreate
[handler.C:100-U] - Handler Thread Create will handle event LWPCreate
[handler.C:100-U] - Handler Callback will handle event LWPCreate
[handler.C:100-U] - Handler Thread Destroy will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event UserThreadDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event pre-LWPDestroy
[handler.C:100-U] - Handler Callback will handle event pre-LWPDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event post-LWPDestroy
[handler.C:100-U] - Handler Callback will handle event post-LWPDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event LWPDestroy
[handler.C:100-U] - Handler Callback will handle event LWPDestroy
[handler.C:100-U] - Handler Thread Destroy will handle event pre-Unknown
[handler.C:100-U] - Handler Thread Destroy will handle event post-Unknown
[handler.C:100-U] - Handler Thread Destroy will handle event Unknown
[handler.C:100-U] - Handler Thread Cleanup will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event UserThreadDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event pre-LWPDestroy
[handler.C:100-U] - Handler Callback will handle event pre-LWPDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event post-LWPDestroy
[handler.C:100-U] - Handler Callback will handle event post-LWPDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event LWPDestroy
[handler.C:100-U] - Handler Callback will handle event LWPDestroy
[handler.C:100-U] - Handler Thread Cleanup will handle event pre-Unknown
[handler.C:100-U] - Handler Thread Cleanup will handle event post-Unknown
[handler.C:100-U] - Handler Thread Cleanup will handle event Unknown
[handler.C:100-U] - Handler Thread Stop will handle event Stop
[handler.C:100-U] - Handler Callback will handle event Stop
[handler.C:100-U] - Handler Single Step will handle event SingleStep
[handler.C:100-U] - Handler Callback will handle event SingleStep
[handler.C:100-U] - Handler Pre Syscall will handle event pre-PreSyscall
[handler.C:100-U] - Handler Callback will handle event pre-PreSyscall
[handler.C:100-U] - Handler Post Syscall will handle event post-PostSyscall
[handler.C:100-U] - Handler Callback will handle event post-PostSyscall
[handler.C:100-U] - Handler Crash will handle event Crash
[handler.C:100-U] - Handler Callback will handle event Crash
[handler.C:100-U] - Handler Breakpoint will handle event Breakpoint
[handler.C:100-U] - Handler Callback will handle event Breakpoint
[handler.C:100-U] - Handler BreakpointContinue will handle event Breakpoint
[handler.C:100-U] - Handler Callback will handle event Breakpoint
[handler.C:100-U] - Handler BreakpointClear will handle event BreakpointClear
[handler.C:100-U] - Handler Breakpoint Restore will handle event BreakpointRestore
[handler.C:100-U] - Handler RPC Handler will handle event RPC
[handler.C:100-U] - Handler Callback will handle event RPC
[handler.C:100-U] - Handler iRPC PreCallback Handler will handle event RPC
[handler.C:100-U] - Handler Callback will handle event RPC
[handler.C:100-U] - Handler Library Handler will handle event Library
[handler.C:100-U] - Handler Callback will handle event Library
[handler.C:100-U] - Handler Post Fork will handle event post-Fork
[handler.C:100-U] - Handler Callback will handle event post-Fork
[handler.C:100-U] - Handler Post Fork Continue will handle event post-Fork
[handler.C:100-U] - Handler Callback will handle event post-Fork
[handler.C:100-U] - Handler Post Exec will handle event post-Exec
[handler.C:100-U] - Handler Callback will handle event post-Exec
[handler.C:100-U] - Handler iRPC Launch Handler will handle event RPCLaunch
[handler.C:100-U] - Handler Async will handle event Async
[handler.C:100-U] - Handler AsyncIO Handler will handle event AsyncRead
[handler.C:100-U] - Handler Callback will handle event AsyncRead
[handler.C:100-U] - Handler AsyncIO Handler will handle event AsyncWrite
[handler.C:100-U] - Handler Callback will handle event AsyncWrite
[handler.C:100-U] - Handler AsyncIO Handler will handle event AsyncReadAllRegs
[handler.C:100-U] - Handler Callback will handle event AsyncReadAllRegs
[handler.C:100-U] - Handler AsyncIO Handler will handle event AsyncSetAllRegs
[handler.C:100-U] - Handler Callback will handle event AsyncSetAllRegs
[handler.C:100-U] - Handler ForceTerminate will handle event post-ForceTerminate
[handler.C:100-U] - Handler Callback will handle event post-ForceTerminate
[handler.C:100-U] - Handler Pre-bootstrap will handle event PreBootstrap
[handler.C:100-U] - Handler Nop Handler will handle event Nop
[handler.C:100-U] - Handler Detach will handle event Detach
[handler.C:100-U] - Handler Emulated Single Step will handle event Breakpoint
[handler.C:100-U] - Handler Callback will handle event Breakpoint
[handler.C:100-U] - Handler HandleAsyncFileRead will handle event AsyncFileRead
[handler.C:100-U] - Handler Callback will handle event AsyncFileRead
[handler.C:100-U] - Handler Postponed Syscall will handle event PostponedSyscall
[handler.C:100-U] - Handler Linux New Thread will handle event ThreadCreate
[handler.C:100-U] - Handler Callback will handle event ThreadCreate
[handler.C:100-U] - Handler Linux New Thread will handle event Bootstrap
[handler.C:100-U] - Handler Callback will handle event Bootstrap
[handler.C:100-U] - Handler Linux Force Termination will handle event post-ForceTerminate
[handler.C:100-U] - Handler Callback will handle event post-ForceTerminate
[handler.C:100-U] - Handler thread_db Library Handler will handle event Library
[handler.C:100-U] - Handler Callback will handle event Library
[handler.C:100-U] - Handler thread_db New Thread Handler will handle event pre-UserThreadCreate
[handler.C:100-U] - Handler Callback will handle event pre-UserThreadCreate
[handler.C:100-U] - Handler thread_db New Thread Handler will handle event post-UserThreadCreate
[handler.C:100-U] - Handler Callback will handle event post-UserThreadCreate
[handler.C:100-U] - Handler thread_db New Thread Handler will handle event UserThreadCreate
[handler.C:100-U] - Handler Callback will handle event UserThreadCreate
[handler.C:100-U] - Handler thread_db Destroy Handler will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event pre-UserThreadDestroy
[handler.C:100-U] - Handler thread_db Destroy Handler will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event post-UserThreadDestroy
[handler.C:100-U] - Handler thread_db Destroy Handler will handle event UserThreadDestroy
[handler.C:100-U] - Handler Callback will handle event UserThreadDestroy
[handler.C:100-U] - Handler thread_db Dispatch Handler will handle event ThreadDB
[handler.C:2361-U] - Registering event pre-Crash with callback function 0x7ff743e90978
[handler.C:2364-U] - Event pre-Crash does not have any handler
[handler.C:2361-U] - Registering event post-Crash with callback function 0x7ff743e90978
[handler.C:2364-U] - Event post-Crash does not have any handler
[handler.C:2361-U] - Registering event Crash with callback function 0x7ff743e90978
[handler.C:2361-U] - Registering event pre-ForceTerminate with callback function 0x7ff743e90978
[handler.C:2364-U] - Event pre-ForceTerminate does not have any handler
[handler.C:2361-U] - Registering event post-ForceTerminate with callback function 0x7ff743e90978
[handler.C:2361-U] - Registering event ForceTerminate with callback function 0x7ff743e90978
[handler.C:2364-U] - Event ForceTerminate does not have any handler
[handler.C:2361-U] - Registering event pre-UserThreadCreate with callback function 0x7ff743e9213a
[handler.C:2361-U] - Registering event post-UserThreadCreate with callback function 0x7ff743e9213a
[handler.C:2361-U] - Registering event UserThreadCreate with callback function 0x7ff743e9213a
[handler.C:2361-U] - Registering event pre-LWPCreate with callback function 0x7ff743e9213a
[handler.C:2364-U] - Event pre-LWPCreate does not have any handler
[handler.C:2361-U] - Registering event post-LWPCreate with callback function 0x7ff743e9213a
[handler.C:2364-U] - Event post-LWPCreate does not have any handler
[handler.C:2361-U] - Registering event LWPCreate with callback function 0x7ff743e9213a
[handler.C:2361-U] - Registering event pre-UserThreadDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event post-UserThreadDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event UserThreadDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event pre-LWPDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event post-LWPDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event LWPDestroy with callback function 0x7ff743e9237a
[handler.C:2361-U] - Registering event pre-Signal with callback function 0x7ff743e910de
[handler.C:2364-U] - Event pre-Signal does not have any handler
[handler.C:2361-U] - Registering event post-Signal with callback function 0x7ff743e910de
[handler.C:2364-U] - Event post-Signal does not have any handler
[handler.C:2361-U] - Registering event Signal with callback function 0x7ff743e910de
[handler.C:2361-U] - Registering event pre-Library with callback function 0x7ff743e90978
[handler.C:2364-U] - Event pre-Library does not have any handler
[handler.C:2361-U] - Registering event post-Library with callback function 0x7ff743e90978
[handler.C:2364-U] - Event post-Library does not have any handler
[handler.C:2361-U] - Registering event Library with callback function 0x7ff743e90978
[handler.C:2361-U] - Registering event pre-Breakpoint with callback function 0x7ff743e913a0
[handler.C:2364-U] - Event pre-Breakpoint does not have any handler
[handler.C:2361-U] - Registering event post-Breakpoint with callback function 0x7ff743e913a0
[handler.C:2364-U] - Event post-Breakpoint does not have any handler
[handler.C:2361-U] - Registering event Breakpoint with callback function 0x7ff743e913a0
[handler.C:2361-U] - Registering event pre-RPC with callback function 0x7ff743e91aca
[handler.C:2364-U] - Event pre-RPC does not have any handler
[handler.C:2361-U] - Registering event post-RPC with callback function 0x7ff743e91aca
[handler.C:2364-U] - Event post-RPC does not have any handler
[handler.C:2361-U] - Registering event RPC with callback function 0x7ff743e91aca
[handler.C:2361-U] - Registering event pre-SingleStep with callback function 0x7ff743e90978
[handler.C:2364-U] - Event pre-SingleStep does not have any handler
[handler.C:2361-U] - Registering event post-SingleStep with callback function 0x7ff743e90978
[handler.C:2364-U] - Event post-SingleStep does not have any handler
[handler.C:2361-U] - Registering event SingleStep with callback function 0x7ff743e90978
[handler.C:2361-U] - Registering event pre-Exit with callback function 0x7ff743e90bae
[handler.C:2361-U] - Registering event post-Exit with callback function 0x7ff743e90bae
[handler.C:2361-U] - Registering event post-Fork with callback function 0x7ff743e90978
[handler.C:2361-U] - Registering event post-Exec with callback function 0x7ff743e90978
[process.C:6201-U] - User asked to launch executable /usr/local/bin/testsuite/./test4_2.dyn_g++_64_none_none
[process.C:1379-U] - New int_process at 0x1b238d8
[int_thread_db.C:369-U] - Opening thread_db with libthread_db.so
[int_thread_db.C:416-U] - Successfully loaded thread_db.so library
[generator.C:144-U] - Setting generator state to initializing
[generator.C:391-G] - Generator started on thread 7ff73f4a1700
[generator.C:144-G] - Setting generator state to none
[process.C:98-U] - Calling plat_create for 1 processes
[generator.C:409-G] - Starting main loop of generator thread
[generator.C:144-G] - Setting generator state to process_blocked
[process.C:112-U] - Creating initial threads for 1 processes
[process.C:4409-U] - Changing postponed syscall state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing exiting state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing startup state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing pending stop state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing callback state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing breakpoint state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing bp hold state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing breakpoint resume state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing irpc setup state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing irpc wait state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing irpc state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing async state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing internal state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing detach state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing irpc user state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing control authority state for 14915/14915 from none to dontcare
[process.C:4409-U] - Changing user state for 14915/14915 from none to neonatal
[process.C:8340-U] - Adjusting counter NeonatalThreads by 1, before 0, after 1
[process.C:4409-U] - Changing handler state for 14915/14915 from none to neonatal
[process.C:4409-U] - Changing generator state for 14915/14915 from none to neonatal
[process.C:8340-U] - Adjusting counter GeneratorNonExitedThreads by 1, before 0, after 1
[process.C:3465-U] - Creating initial thread 14915/14915, thr_id = 0xffffffffffffffff
[process.C:4409-U] - Changing user state for 14915/14915 from neonatal to neonatal_intermediate
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing handler state for 14915/14915 from neonatal to neonatal_intermediate
[process.C:8340-U] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing generator state for 14915/14915 from neonatal to neonatal_intermediate
[procpool.C:62-U] - Adding process 14915 to pool
[process.C:727-U] - Changing state of process from neonatal to neonatal_intermediate on 14915
[process.C:741-U] - Setting state of all threads in 14915 to neonatal_intermediate
[process.C:4345-U] - Leaving user state for 14915/14915 in state neonatal_intermediate
[process.C:4345-U] - Leaving handler state for 14915/14915 in state neonatal_intermediate
[process.C:4345-U] - Leaving generator state for 14915/14915 in state neonatal_intermediate
[process.C:121-U] - Created debugged /usr/local/bin/testsuite/./test4_2.dyn_g++_64_none_none on pid 14915
[process.C:128-U] - Waiting for startup for 1 processes
[process.C:189-U] - Waiting for startup to complete for 14915
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Blocking for events = !F && ((T && !F && T) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:155-U] - Blocking for events from mailbox, queue size = 0
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:560-G] - Decoded event to bootstrap on 14915/14915
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event Bootstrap is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from neonatal_intermediate to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event Bootstrap to mailbox, size = 1 + 0 + 0 = 1
[mailbox.C:171-U] - Returning event Bootstrap from mailbox
[process.C:2306-U] - Event Bootstrap is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:8340-U] - Adjusting counter NeonatalThreads by -1, before 1, after 0
[process.C:4409-U] - Changing handler state for 14915/14915 from neonatal_intermediate to stopped
[handler.C:402-U] - Event Bootstrap added to handle list with handler Bootstrap
[handler.C:402-U] - Event Bootstrap added to handle list with handler Linux New Thread
[handler.C:402-U] - Event Bootstrap added to handle list with handler Callback
[handler.C:419-U] - Have event Bootstrap on Bootstrap
[handler.C:419-U] - Have event Bootstrap on Linux New Thread
[handler.C:419-U] - Have event Bootstrap on Callback
[handler.C:437-U] - Handling event 'Bootstrap' with handler 'Bootstrap'
[handler.C:560-U] - Handling bootstrap for 14915
[process.C:4409-U] - Changing user state for 14915/14915 from neonatal_intermediate to stopped
[handler.C:586-U] - All threads are bootstrapped, marking process bootstrapped
[process.C:727-U] - Changing state of process from neonatal_intermediate to running on 14915
[process.C:741-U] - Setting state of all threads in 14915 to stopped
[process.C:4345-U] - Leaving user state for 14915/14915 in state stopped
[process.C:4345-U] - Leaving handler state for 14915/14915 in state stopped
[process.C:4345-U] - Leaving generator state for 14915/14915 in state stopped
[handler.C:437-U] - Handling event 'Bootstrap' with handler 'Linux New Thread'
[linux.C:3176-U] - Setting ptrace options for new thread 14915
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[handler.C:437-U] - Handling event 'Bootstrap' with handler 'Callback'
[handler.C:2128-U] - No callback registered for event type 'Bootstrap'
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:148-U] - Triggering post-create for 1 processes
[process.C:688-U] - Starting post_create for process 14915
[sysv.C:242-U] - Refreshing list of loaded libraries
[sysv.C:201-U] - Initializing library mechanism for process 14915
[sysv.C:227-U] - Installing library breakpoint at 7fbbfa0f8e80
[process.C:5175-U] - Prepping breakpoint at 7fbbfa0f8e80
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbfa0f8e80 +1
[linux.C:918-U] - computeAddrWidth: Offset set to 1, word size is 8
[process.C:1489-U] - Reading from remote memory 7fbbfa0f8e80 to 0x1bcdc20, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xf3
[response.C:304-U] - Waiting for async event 1, complete
[process.C:1547-U] - Writing to remote memory 7fbbfa0f8e80 from 0x7ffce14811c0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 2, complete
[process.C:1489-U] - Reading from remote memory 400040 to 0x7ffce1481190, size = 56 on 14915/14915
[process.C:1489-U] - Reading from remote memory 400078 to 0x7ffce1481190, size = 56 on 14915/14915
[process.C:1489-U] - Reading from remote memory 4000b0 to 0x7ffce1481190, size = 56 on 14915/14915
[process.C:1489-U] - Reading from remote memory 7fbbfa30b120 to 0x1b96210, size = 40 on 14915/14915
[sysv.C:279-U] - Found library /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none at 0
[sysv.C:281-U] - Creating new library object for /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none
[sysv.C:279-U] - Found library /usr/lib64/ld-2.22.so at 7fbbfa0e9000
[sysv.C:281-U] - Creating new library object for /usr/lib64/ld-2.22.so
[process.C:676-U] - Successfully initialized address space for 14915
[int_thread_db.C:647-U] - Initializing thread_db library
[int_thread_db.C:663-U] - Sucessfully initialized thread_db
[int_thread_db.C:677-U] - Creating threadAgent
[int_thread_db.C:59-U] - Looking up symbol nptl_version in libpthread.so.0
[int_thread_db.C:1006-U] - Didn't yet find loaded thread library
[int_thread_db.C:684-U] - Debuggee isn't multithreaded at this point, libthread_db not enabled
[process.C:163-U] - Finished post-create for 14915.  Process is ready
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14915/14915 before user thread create
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rip
[linux.C:2500-U] - Register x86_64::rip has value 0x7fbbfa0e9c80
[process.C:3820-U] - Returning register value 7fbbfa0e9c80 for register x86_64::rip on 14915
[response.C:304-U] - Waiting for async event 7, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rsp
[linux.C:2500-U] - Register x86_64::rsp has value 0x7ffda7784d90
[process.C:3820-U] - Returning register value 7ffda7784d90 for register x86_64::rsp on 14915
[response.C:304-U] - Waiting for async event 8, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rbp
[linux.C:2500-U] - Register x86_64::rbp has value 0x0
[process.C:3820-U] - Returning register value 0 for register x86_64::rbp on 14915
[response.C:304-U] - Waiting for async event 9, complete
[process.C:5175-U] - Prepping breakpoint at 4024b2
[process.C:5056-U] - Saving original data for breakpoint insertion at 4024b2 +1
[process.C:1489-U] - Reading from remote memory 4024b2 to 0x1c18340, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x55
[response.C:304-U] - Waiting for async event 10, complete
[process.C:1547-U] - Writing to remote memory 4024b2 from 0x7ffce1481630, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 11, complete
[procset.C:1464-U] - User continuing entire process 14915
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Nop from mailbox
[handler.C:402-H] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-H] - Have event Nop on Nop Handler
[handler.C:437-H] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1523-H] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:2500-G] - Register x86_64::rip has value 0x7fbbfa0f8e81
[irpc.C:930-G] - 14915/14915 is not running any iRPCs, trap is not RPC completion
[linux.C:666-G] - Decoded breakpoint on 14915/14915 at 7fbbfa0f8e80
[linux.C:680-G] - Breakpoint is library load/unload
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event Breakpoint is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event Breakpoint to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Breakpoint from mailbox
[process.C:2306-H] - Event Breakpoint is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[process.C:4287-H] - Desyncing 14915/14915 bp hold state to level 1
[process.C:4409-H] - Changing bp hold state for 14915/14915 from dontcare to stopped
[handler.C:402-H] - Event Library added to handle list with handler Library Handler
[handler.C:402-H] - Event Library added to handle list with handler thread_db Library Handler
[handler.C:402-H] - Event Library added to handle list with handler Callback
[handler.C:402-H] - Event Breakpoint added to handle list with handler Breakpoint
[handler.C:402-H] - Event Breakpoint added to handle list with handler Emulated Single Step
[handler.C:402-H] - Event Breakpoint added to handle list with handler Callback
[handler.C:402-H] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-H] - Have event Breakpoint on Breakpoint
[handler.C:419-H] - Have event Library on Library Handler
[handler.C:419-H] - Have event Breakpoint on Emulated Single Step
[handler.C:419-H] - Have event Library on thread_db Library Handler
[handler.C:419-H] - Have event Breakpoint on Callback
[handler.C:419-H] - Have event Library on Callback
[handler.C:419-H] - Have event Breakpoint on BreakpointContinue
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Breakpoint'
[handler.C:1328-H] - Handling breakpoint at 7fbbfa0f8e80
[handler.C:1364-H] - Breakpoint shifted PC.  Moving PC to 7fbbfa0f8e80
[process.C:3842-H] - 14915/14915: Setting x86_64::rip to 0x7fbbfa0f8e80...
[process.C:3867-H] - Setting register x86_64::rip for thread 14915 to 7fbbfa0f8e80
[linux.C:2791-H] - Set register x86_64::rip (size 8, offset 128) to value 7fbbfa0f8e80
[handler.C:1404-H] - In breakpoint handler, 0 breakpoints for user callback
[event.C:133-H] - Setting callback suppress for Breakpoint
[handler.C:1459-H] - Breakpoint handler decided BP needs clearing
[handler.C:437-H] - Handling event 'Library' with handler 'Library Handler'
[handler.C:1752-H] - Handling library load/unload
[sysv.C:242-H] - Refreshing list of loaded libraries
[process.C:1489-H] - Reading from remote memory 7fbbfa30b120 to 0x7ff730000c40, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b148 to 0x7ff730000e30, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b6d8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30a998 to 0x7ff730000e30, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400238 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400240 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400248 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400250 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b6e0 to 0x7ff730000e30, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30bb78 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30bb80 to 0x1b23a20, size = 8 on 14915/14915
[sysv.C:279-H] - Found library /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none at 0
[sysv.C:279-H] - Found library /lib64/ld-linux-x86-64.so.2 at 7fbbfa0e9000
[sysv.C:281-H] - Creating new library object for /lib64/ld-linux-x86-64.so.2
[sysv.C:307-H] - Didn't find old library /usr/lib64/ld-2.22.so at 7fbbfa0e9000, unloading
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Emulated Single Step'
[handler.C:437-H] - Handling event 'Library' with handler 'thread_db Library Handler'
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Callback'
[event.C:359-H] - Suppressing CB on EventBreakpoint: All event suppress
[handler.C:2147-H] - Suppressing callbacks for event Breakpoint
[handler.C:437-H] - Handling event 'Library' with handler 'Callback'
[handler.C:2250-H] - Changing callback state of 14915 before CB
[process.C:4287-H] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-H] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:5657-H] - noteEvent - 1
[handler.C:449-H] - Handler Callback delaying for user thread
[mailbox.C:120-H] - Added event Breakpoint to mailbox, size = 0 + 0 + 1 = 1
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, callback: ditto, code: -H------S-------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:6170-U] - User triggered event handling
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Polling for events = !F && ((T && !F && F) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Breakpoint from mailbox
[handler.C:398-U] - Have event Library on Library Handler (already handled)
[handler.C:398-U] - Have event Library on thread_db Library Handler (already handled)
[handler.C:402-U] - Event Library added to handle list with handler Callback
[handler.C:398-U] - Have event Breakpoint on Breakpoint (already handled)
[handler.C:398-U] - Have event Breakpoint on Emulated Single Step (already handled)
[handler.C:398-U] - Have event Breakpoint on Callback (already handled)
[handler.C:402-U] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-U] - Have event Library on Callback
[handler.C:419-U] - Have event Breakpoint on BreakpointContinue
[handler.C:437-U] - Handling event 'Library' with handler 'Callback'
[process.C:5675-U] - clearEvent - 0
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:2250-U] - Changing callback state of 14915 before CB
[process.C:4287-U] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-U] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2273-U] - Triggering callback for event 'Library'
[handler.C:2278-U] - Triggering callback #0 for event 'Library'
[handler.C:2289-U] - Callback #0 return cbProcStop/cbProcStop
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[handler.C:2307-U] - Handling return value for main process
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2312-U] - Handling return value for child process/thread
[handler.C:2332-U] - Restoring callback state of 14915/14915 after CB
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:437-U] - Handling event 'Breakpoint' with handler 'BreakpointContinue'
[process.C:4312-U] - Restoring 14915/14915 bp hold state to level 0
[process.C:4409-U] - Changing bp hold state for 14915/14915 from stopped to dontcare
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[procset.C:1464-U] - User continuing entire process 14915
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Nop from mailbox
[handler.C:402-H] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-H] - Have event Nop on Nop Handler
[handler.C:437-H] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:3531-H] - Found thread 14915/14915 to be stopped on a software BP, not continuing
[process.C:4287-H] - Desyncing 14915/14915 breakpoint state to level 1
[process.C:4409-H] - Changing breakpoint state for 14915/14915 from dontcare to stopped
[event.C:133-H] - Setting callback suppress for BreakpointClear
[mailbox.C:120-H] - Added event BreakpointClear to mailbox, size = 1 + 0 + 0 = 1
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, breakpoint: stopped, code: -------S--------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event BreakpointClear from mailbox
[handler.C:402-H] - Event BreakpointClear added to handle list with handler BreakpointClear
[handler.C:419-H] - Have event BreakpointClear on BreakpointClear
[handler.C:437-H] - Handling event 'BreakpointClear' with handler 'BreakpointClear'
[handler.C:1546-H] - Removing breakpoint from memory under HandleBreakpointClear
[process.C:5074-H] - Restoring original code over breakpoint at 7fbbfa0f8e80
[process.C:1547-H] - Writing to remote memory 7fbbfa0f8e80 from 0x1bcdc20, size = 1 on 14915/14915
[handler.C:1584-H] - HandleBreakpointClear restoring BP.  Single stepping the process.
[process.C:4123-H] - 14915/14915 marking clearing bp 0x1bcdb90 (at 0x7fbbfa0f8e80)
[process.C:8340-H] - Adjusting counter ClearingBPs by 1, before 0, after 1
[handler.C:1588-H] - Making stop/continue decisions for handleBreakpointClear when stepping over BP
[process.C:4287-H] - Desyncing 14915/14915 breakpoint resume state to level 1
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from dontcare to running
[process.C:4312-H] - Restoring 14915/14915 breakpoint state to level 0
[process.C:4409-H] - Changing breakpoint state for 14915/14915 from stopped to dontcare
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, breakpoint resume: running, code: ---------R------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1513-H] - Calling PTRACE_SINGLESTEP on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:2500-G] - Register x86_64::rip has value 0x7fbbfa0ec062
[irpc.C:930-G] - 14915/14915 is not running any iRPCs, trap is not RPC completion
[linux.C:625-G] - Decoded event to breakpoint restore
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event BreakpointRestore is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event BreakpointRestore to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event BreakpointRestore from mailbox
[process.C:2306-H] - Event BreakpointRestore is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-H] - Event BreakpointRestore added to handle list with handler Breakpoint Restore
[handler.C:419-H] - Have event BreakpointRestore on Breakpoint Restore
[handler.C:437-H] - Handling event 'BreakpointRestore' with handler 'Breakpoint Restore'
[handler.C:1648-H] - Restoring breakpoint at 7fbbfa0f8e80 for 14915/14915
[process.C:4123-H] - 14915/14915 marking clearing bp (nil) (at 0x0)
[process.C:8340-H] - Adjusting counter ClearingBPs by -1, before 1, after 0
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from running to stopped
[handler.C:1656-H] - Restoring breakpoint to process
[process.C:1547-H] - Writing to remote memory 7fbbfa0f8e80 from 0x7ff7408bb6b0, size = 1 on 14915/14915
[handler.C:1678-H] - Restoring thread state after breakpoint restore
[process.C:4312-H] - Restoring 14915/14915 breakpoint resume state to level 0
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from stopped to dontcare
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1523-H] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:2500-G] - Register x86_64::rip has value 0x7fbbfa0f8e81
[irpc.C:930-G] - 14915/14915 is not running any iRPCs, trap is not RPC completion
[linux.C:666-G] - Decoded breakpoint on 14915/14915 at 7fbbfa0f8e80
[linux.C:680-G] - Breakpoint is library load/unload
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event Breakpoint is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event Breakpoint to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Breakpoint from mailbox
[process.C:2306-H] - Event Breakpoint is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[process.C:4287-H] - Desyncing 14915/14915 bp hold state to level 1
[process.C:4409-H] - Changing bp hold state for 14915/14915 from dontcare to stopped
[handler.C:402-H] - Event Library added to handle list with handler Library Handler
[handler.C:402-H] - Event Library added to handle list with handler thread_db Library Handler
[handler.C:402-H] - Event Library added to handle list with handler Callback
[handler.C:402-H] - Event Breakpoint added to handle list with handler Breakpoint
[handler.C:402-H] - Event Breakpoint added to handle list with handler Emulated Single Step
[handler.C:402-H] - Event Breakpoint added to handle list with handler Callback
[handler.C:402-H] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-H] - Have event Breakpoint on Breakpoint
[handler.C:419-H] - Have event Library on Library Handler
[handler.C:419-H] - Have event Breakpoint on Emulated Single Step
[handler.C:419-H] - Have event Library on thread_db Library Handler
[handler.C:419-H] - Have event Breakpoint on Callback
[handler.C:419-H] - Have event Library on Callback
[handler.C:419-H] - Have event Breakpoint on BreakpointContinue
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Breakpoint'
[handler.C:1328-H] - Handling breakpoint at 7fbbfa0f8e80
[handler.C:1364-H] - Breakpoint shifted PC.  Moving PC to 7fbbfa0f8e80
[process.C:3842-H] - 14915/14915: Setting x86_64::rip to 0x7fbbfa0f8e80...
[process.C:3867-H] - Setting register x86_64::rip for thread 14915 to 7fbbfa0f8e80
[linux.C:2791-H] - Set register x86_64::rip (size 8, offset 128) to value 7fbbfa0f8e80
[handler.C:1404-H] - In breakpoint handler, 0 breakpoints for user callback
[event.C:133-H] - Setting callback suppress for Breakpoint
[handler.C:1459-H] - Breakpoint handler decided BP needs clearing
[handler.C:437-H] - Handling event 'Library' with handler 'Library Handler'
[handler.C:1752-H] - Handling library load/unload
[sysv.C:242-H] - Refreshing list of loaded libraries
[process.C:1489-H] - Reading from remote memory 7fbbfa30b120 to 0x7ff730000a30, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b148 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b6d8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30b6e0 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30bb78 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30bb80 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087d0 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087a8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087b0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087b8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087c0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa3087c8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa000 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa308cb0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa308cb8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa308cc0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa4d0 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa4b8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa4c0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa4c8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa9a0 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa988 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa990 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fa998 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2f9000 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fae58 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fae60 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2fae68 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2f94d0 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2f94b8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2f94c0 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa2f94c8 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 7fbbfa30a998 to 0x7ff730001480, size = 40 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400238 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400240 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400248 to 0x1b23a20, size = 8 on 14915/14915
[process.C:1489-H] - Reading from remote memory 400250 to 0x1b23a20, size = 8 on 14915/14915
[sysv.C:279-H] - Found library /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none at 0
[sysv.C:279-H] - Found library /usr/local/lib/libdyninstAPI_RT.so at 7fbbf8e57000
[sysv.C:281-H] - Creating new library object for /usr/local/lib/libdyninstAPI_RT.so
[sysv.C:279-H] - Found library /lib64/libstdc++.so.6 at 7fbbf8ad5000
[sysv.C:281-H] - Creating new library object for /lib64/libstdc++.so.6
[sysv.C:279-H] - Found library /lib64/libm.so.6 at 7fbbf87d3000
[sysv.C:281-H] - Creating new library object for /lib64/libm.so.6
[sysv.C:279-H] - Found library /lib64/libgcc_s.so.1 at 7fbbf85bc000
[sysv.C:281-H] - Creating new library object for /lib64/libgcc_s.so.1
[sysv.C:279-H] - Found library /lib64/libc.so.6 at 7fbbf81fb000
[sysv.C:281-H] - Creating new library object for /lib64/libc.so.6
[sysv.C:279-H] - Found library /lib64/libdl.so.2 at 7fbbf7ff7000
[sysv.C:281-H] - Creating new library object for /lib64/libdl.so.2
[sysv.C:279-H] - Found library /lib64/ld-linux-x86-64.so.2 at 7fbbfa0e9000
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Emulated Single Step'
[handler.C:437-H] - Handling event 'Library' with handler 'thread_db Library Handler'
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Callback'
[event.C:359-H] - Suppressing CB on EventBreakpoint: All event suppress
[handler.C:2147-H] - Suppressing callbacks for event Breakpoint
[handler.C:437-H] - Handling event 'Library' with handler 'Callback'
[handler.C:2250-H] - Changing callback state of 14915 before CB
[process.C:4287-H] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-H] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:5657-H] - noteEvent - 1
[handler.C:449-H] - Handler Callback delaying for user thread
[mailbox.C:120-H] - Added event Breakpoint to mailbox, size = 0 + 0 + 1 = 1
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, callback: ditto, code: -H------S-------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:6170-U] - User triggered event handling
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Polling for events = !F && ((T && !F && F) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Breakpoint from mailbox
[handler.C:398-U] - Have event Library on Library Handler (already handled)
[handler.C:398-U] - Have event Library on thread_db Library Handler (already handled)
[handler.C:402-U] - Event Library added to handle list with handler Callback
[handler.C:398-U] - Have event Breakpoint on Breakpoint (already handled)
[handler.C:398-U] - Have event Breakpoint on Emulated Single Step (already handled)
[handler.C:398-U] - Have event Breakpoint on Callback (already handled)
[handler.C:402-U] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-U] - Have event Library on Callback
[handler.C:419-U] - Have event Breakpoint on BreakpointContinue
[handler.C:437-U] - Handling event 'Library' with handler 'Callback'
[process.C:5675-U] - clearEvent - 0
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:2250-U] - Changing callback state of 14915 before CB
[process.C:4287-U] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-U] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2273-U] - Triggering callback for event 'Library'
[handler.C:2278-U] - Triggering callback #0 for event 'Library'
[handler.C:2289-U] - Callback #0 return cbProcStop/cbProcStop
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[handler.C:2307-U] - Handling return value for main process
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2312-U] - Handling return value for child process/thread
[handler.C:2332-U] - Restoring callback state of 14915/14915 after CB
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:437-U] - Handling event 'Breakpoint' with handler 'BreakpointContinue'
[process.C:4312-U] - Restoring 14915/14915 bp hold state to level 0
[process.C:4409-U] - Changing bp hold state for 14915/14915 from stopped to dontcare
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[procset.C:1464-U] - User continuing entire process 14915
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Nop from mailbox
[handler.C:402-H] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-H] - Have event Nop on Nop Handler
[handler.C:437-H] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:3531-H] - Found thread 14915/14915 to be stopped on a software BP, not continuing
[process.C:4287-H] - Desyncing 14915/14915 breakpoint state to level 1
[process.C:4409-H] - Changing breakpoint state for 14915/14915 from dontcare to stopped
[event.C:133-H] - Setting callback suppress for BreakpointClear
[mailbox.C:120-H] - Added event BreakpointClear to mailbox, size = 1 + 0 + 0 = 1
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, breakpoint: stopped, code: -------S--------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event BreakpointClear from mailbox
[handler.C:402-H] - Event BreakpointClear added to handle list with handler BreakpointClear
[handler.C:419-H] - Have event BreakpointClear on BreakpointClear
[handler.C:437-H] - Handling event 'BreakpointClear' with handler 'BreakpointClear'
[handler.C:1546-H] - Removing breakpoint from memory under HandleBreakpointClear
[process.C:5074-H] - Restoring original code over breakpoint at 7fbbfa0f8e80
[process.C:1547-H] - Writing to remote memory 7fbbfa0f8e80 from 0x1bcdc20, size = 1 on 14915/14915
[handler.C:1584-H] - HandleBreakpointClear restoring BP.  Single stepping the process.
[process.C:4123-H] - 14915/14915 marking clearing bp 0x1bcdb90 (at 0x7fbbfa0f8e80)
[process.C:8340-H] - Adjusting counter ClearingBPs by 1, before 0, after 1
[handler.C:1588-H] - Making stop/continue decisions for handleBreakpointClear when stepping over BP
[process.C:4287-H] - Desyncing 14915/14915 breakpoint resume state to level 1
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from dontcare to running
[process.C:4312-H] - Restoring 14915/14915 breakpoint state to level 0
[process.C:4409-H] - Changing breakpoint state for 14915/14915 from stopped to dontcare
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, breakpoint resume: running, code: ---------R------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1513-H] - Calling PTRACE_SINGLESTEP on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:2500-G] - Register x86_64::rip has value 0x7fbbfa0ec908
[irpc.C:930-G] - 14915/14915 is not running any iRPCs, trap is not RPC completion
[linux.C:625-G] - Decoded event to breakpoint restore
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event BreakpointRestore is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event BreakpointRestore to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event BreakpointRestore from mailbox
[process.C:2306-H] - Event BreakpointRestore is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-H] - Event BreakpointRestore added to handle list with handler Breakpoint Restore
[handler.C:419-H] - Have event BreakpointRestore on Breakpoint Restore
[handler.C:437-H] - Handling event 'BreakpointRestore' with handler 'Breakpoint Restore'
[handler.C:1648-H] - Restoring breakpoint at 7fbbfa0f8e80 for 14915/14915
[process.C:4123-H] - 14915/14915 marking clearing bp (nil) (at 0x0)
[process.C:8340-H] - Adjusting counter ClearingBPs by -1, before 1, after 0
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from running to stopped
[handler.C:1656-H] - Restoring breakpoint to process
[process.C:1547-H] - Writing to remote memory 7fbbfa0f8e80 from 0x7ff7408bb6b0, size = 1 on 14915/14915
[handler.C:1678-H] - Restoring thread state after breakpoint restore
[process.C:4312-H] - Restoring 14915/14915 breakpoint resume state to level 0
[process.C:4409-H] - Changing breakpoint resume state for 14915/14915 from stopped to dontcare
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1523-H] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1407 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x57f
[linux.C:315-G] - Decoded to signal 5
[linux.C:2500-G] - Register x86_64::rip has value 0x4024b3
[irpc.C:930-G] - 14915/14915 is not running any iRPCs, trap is not RPC completion
[linux.C:666-G] - Decoded breakpoint on 14915/14915 at 4024b2
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event Breakpoint is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event Breakpoint to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Breakpoint from mailbox
[process.C:2306-H] - Event Breakpoint is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-H] - Event Breakpoint added to handle list with handler Breakpoint
[handler.C:402-H] - Event Breakpoint added to handle list with handler Emulated Single Step
[handler.C:402-H] - Event Breakpoint added to handle list with handler Callback
[handler.C:402-H] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-H] - Have event Breakpoint on Breakpoint
[handler.C:419-H] - Have event Breakpoint on Emulated Single Step
[handler.C:419-H] - Have event Breakpoint on Callback
[handler.C:419-H] - Have event Breakpoint on BreakpointContinue
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Breakpoint'
[handler.C:1328-H] - Handling breakpoint at 4024b2
[handler.C:1364-H] - Breakpoint shifted PC.  Moving PC to 4024b2
[process.C:3842-H] - 14915/14915: Setting x86_64::rip to 0x4024b2...
[process.C:3867-H] - Setting register x86_64::rip for thread 14915 to 4024b2
[linux.C:2791-H] - Set register x86_64::rip (size 8, offset 128) to value 4024b2
[handler.C:1404-H] - In breakpoint handler, 1 breakpoints for user callback
[event.C:374-H] - Suppressing CB on EventBreakpoint: checking for unsuppressed HL BP: <no suppress>
[handler.C:1434-H] - BP handler is setting user state to reflect breakpoint
[process.C:4409-H] - Changing user state for 14915/14915 from running to stopped
[handler.C:1459-H] - Breakpoint handler decided BP needs clearing
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Emulated Single Step'
[handler.C:437-H] - Handling event 'Breakpoint' with handler 'Callback'
[event.C:374-H] - Suppressing CB on EventBreakpoint: checking for unsuppressed HL BP: <no suppress>
[handler.C:2250-H] - Changing callback state of 14915 before CB
[process.C:4287-H] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-H] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:5657-H] - noteEvent - 1
[handler.C:449-H] - Handler Callback delaying for user thread
[mailbox.C:120-H] - Added event Breakpoint to mailbox, size = 0 + 0 + 1 = 1
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, callback: ditto, code: -H--------------SSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:6170-U] - User triggered event handling
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Polling for events = !F && ((T && !F && F) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Breakpoint from mailbox
[handler.C:398-U] - Have event Breakpoint on Breakpoint (already handled)
[handler.C:398-U] - Have event Breakpoint on Emulated Single Step (already handled)
[handler.C:402-U] - Event Breakpoint added to handle list with handler Callback
[handler.C:402-U] - Event Breakpoint added to handle list with handler BreakpointContinue
[handler.C:419-U] - Have event Breakpoint on Callback
[handler.C:419-U] - Have event Breakpoint on BreakpointContinue
[handler.C:437-U] - Handling event 'Breakpoint' with handler 'Callback'
[process.C:5675-U] - clearEvent - 0
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[event.C:374-U] - Suppressing CB on EventBreakpoint: checking for unsuppressed HL BP: <no suppress>
[handler.C:2250-U] - Changing callback state of 14915 before CB
[process.C:4287-U] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-U] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:4345-U] - Leaving user state for 14915/14915 in state stopped
[handler.C:2273-U] - Triggering callback for event 'Breakpoint'
[handler.C:2278-U] - Triggering callback #0 for event 'Breakpoint'
[process.C:2058-U] - Removing breakpoint at 4024b2 in 14915
[process.C:1547-U] - Writing to remote memory 4024b2 from 0x1c18340, size = 1 on 14915/14915
[handler.C:2289-U] - Callback #0 return cbProcStop/cbProcStop
[process.C:4345-U] - Leaving user state for 14915/14915 in state stopped
[handler.C:2307-U] - Handling return value for main process
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4345-U] - Leaving user state for 14915/14915 in state stopped
[handler.C:2312-U] - Handling return value for child process/thread
[handler.C:2332-U] - Restoring callback state of 14915/14915 after CB
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:437-U] - Handling event 'Breakpoint' with handler 'BreakpointContinue'
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:6867-U] - User wants to read memory from 0x7fbbf905f228 to 0x0x7ffce148185c of size 4
[process.C:1489-U] - Reading from remote memory 7fbbf905f228 to 0x7ffce148185c, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 68, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1b8 from buffer 0x0x7ffce148150c of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1b8 from 0x7ffce148150c, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 69, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1bc from buffer 0x0x7ffce14814ec of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1bc from 0x7ffce14814ec, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 70, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f24c from buffer 0x0x7ff744358d1c of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f24c from 0x7ff744358d1c, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 71, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1b0 from buffer 0x0x7ffce14814e8 of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1b0 from 0x7ffce14814e8, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 72, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf90e8f10 from buffer 0x0xa3bd070 of size 807
[process.C:1547-U] - Writing to remote memory 7fbbf90e8f10 from 0xa3bd070, size = 807 on 14915/14915
[response.C:304-U] - Waiting for async event 73, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3769
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3769 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3769 to 0x9ffe1f0, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x49
[response.C:304-U] - Waiting for async event 74, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3769 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 75, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3767
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3767 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3767 to 0xa2c7a80, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xff
[response.C:304-U] - Waiting for async event 76, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3767 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 77, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c36e7
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c36e7 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c36e7 to 0x7dd9890, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x49
[response.C:304-U] - Waiting for async event 78, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c36e7 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 79, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c36e5
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c36e5 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c36e5 to 0xa3be5c0, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xff
[response.C:304-U] - Waiting for async event 80, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c36e5 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 81, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c36d4
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c36d4 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c36d4 to 0x4692730, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xf
[response.C:304-U] - Waiting for async event 82, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c36d4 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 83, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3640
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3640 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3640 to 0x6e548e0, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x48
[response.C:304-U] - Waiting for async event 84, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3640 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 85, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c35de
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c35de +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c35de to 0x350e430, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x48
[response.C:304-U] - Waiting for async event 86, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c35de from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 87, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3578
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3578 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3578 to 0x3561e50, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0x45
[response.C:304-U] - Waiting for async event 88, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3578 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 89, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3571
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3571 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3571 to 0x3562200, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xeb
[response.C:304-U] - Waiting for async event 90, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3571 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 91, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c3550
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c3550 +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c3550 to 0x3562eb0, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xff
[response.C:304-U] - Waiting for async event 92, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c3550 from 0x7ffce1480ab0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 93, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3500 from buffer 0x0x34fbb70 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3500 from 0x34fbb70, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 94, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c37d1 from buffer 0x0x7215e10 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c37d1 from 0x7215e10, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 95, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c37b8 from buffer 0x0x7d89270 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c37b8 from 0x7d89270, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 96, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c37a6 from buffer 0x0x71af830 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c37a6 from 0x71af830, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 97, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c37a1 from buffer 0x0x856ab70 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c37a1 from 0x856ab70, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 98, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c379c from buffer 0x0x421d550 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c379c from 0x421d550, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 99, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3794 from buffer 0x0x3dbaff0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3794 from 0x3dbaff0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 100, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c377f from buffer 0x0x9f13050 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c377f from 0x9f13050, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 101, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3778 from buffer 0x0x9e1fa10 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3778 from 0x9e1fa10, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 102, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c376d from buffer 0x0x7458c30 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c376d from 0x7458c30, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 103, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c375a from buffer 0x0x75ef820 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c375a from 0x75ef820, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 104, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3750 from buffer 0x0x71a3550 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3750 from 0x71a3550, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 105, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3740 from buffer 0x0x6fb1530 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3740 from 0x6fb1530, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 106, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c373b from buffer 0x0x9a70c10 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c373b from 0x9a70c10, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 107, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3736 from buffer 0x0x6d5e030 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3736 from 0x6d5e030, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 108, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3728 from buffer 0x0x8717330 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3728 from 0x8717330, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 109, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3716 from buffer 0x0x76093f0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3716 from 0x76093f0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 110, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3706 from buffer 0x0x8a7aea0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3706 from 0x8a7aea0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 111, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c36fc from buffer 0x0x9fbd300 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c36fc from 0x9fbd300, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 112, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c36eb from buffer 0x0x7c8d9c0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c36eb from 0x7c8d9c0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 113, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c36d8 from buffer 0x0x75275f0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c36d8 from 0x75275f0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 114, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c368d from buffer 0x0x7c33af0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c368d from 0x7c33af0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 115, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3688 from buffer 0x0x351f450 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3688 from 0x351f450, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 116, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3664 from buffer 0x0x86a90a0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3664 from 0x86a90a0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 117, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c365c from buffer 0x0x3535950 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c365c from 0x3535950, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 118, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3655 from buffer 0x0x7243530 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3655 from 0x7243530, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 119, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c364d from buffer 0x0x3551290 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c364d from 0x3551290, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 120, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3648 from buffer 0x0x8145e50 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3648 from 0x8145e50, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 121, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3643 from buffer 0x0x75b3470 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3643 from 0x75b3470, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 122, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3638 from buffer 0x0x80ab980 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3638 from 0x80ab980, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 123, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c362c from buffer 0x0x7aacad0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c362c from 0x7aacad0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 124, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3627 from buffer 0x0x8051800 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3627 from 0x8051800, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 125, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3622 from buffer 0x0x7623d10 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3622 from 0x7623d10, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 126, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c35e2 from buffer 0x0x802d5a0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c35e2 from 0x802d5a0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 127, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c35d2 from buffer 0x0x888d520 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c35d2 from 0x888d520, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 128, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c35c7 from buffer 0x0x7fd6430 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c35c7 from 0x7fd6430, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 129, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c35bb from buffer 0x0x9e1fab0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c35bb from 0x9e1fab0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 130, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3585 from buffer 0x0x8254460 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3585 from 0x8254460, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 131, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3580 from buffer 0x0x3560e20 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3580 from 0x3560e20, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 132, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c357b from buffer 0x0x8205390 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c357b from 0x8205390, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 133, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3552 from buffer 0x0x3562910 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3552 from 0x3562910, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 134, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3547 from buffer 0x0x6c606d0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3547 from 0x6c606d0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 135, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3540 from buffer 0x0x35635f0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3540 from 0x35635f0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 136, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3539 from buffer 0x0x6cc5550 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3539 from 0x6cc5550, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 137, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3528 from buffer 0x0x3563d50 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3528 from 0x3563d50, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 138, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c351c from buffer 0x0x82f4f60 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c351c from 0x82f4f60, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 139, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3510 from buffer 0x0x35649d0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3510 from 0x35649d0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 140, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rip
[process.C:3789-U] - Had cached register value
[process.C:3820-U] - Returning register value 4024b2 for register x86_64::rip on 14915
[response.C:304-U] - Waiting for async event 141, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rsp
[linux.C:2500-U] - Register x86_64::rsp has value 0x7ffda7784cb8
[process.C:3820-U] - Returning register value 7ffda7784cb8 for register x86_64::rsp on 14915
[response.C:304-U] - Waiting for async event 142, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rbp
[linux.C:2500-U] - Register x86_64::rbp has value 0x404670
[process.C:3820-U] - Returning register value 404670 for register x86_64::rbp on 14915
[response.C:304-U] - Waiting for async event 143, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf90e9238 from buffer 0x0x79d2910 of size 187
[process.C:1547-U] - Writing to remote memory 7fbbf90e9238 from 0x79d2910, size = 187 on 14915/14915
[response.C:304-U] - Waiting for async event 144, complete
[process.C:5175-U] - Prepping breakpoint at 7fbbf82c389f
[process.C:5056-U] - Saving original data for breakpoint insertion at 7fbbf82c389f +1
[process.C:1489-U] - Reading from remote memory 7fbbf82c389f to 0xa339bb0, size = 1 on 14915/14915
[process.C:5062-U] - Buffer contents from read breakpoint:
[process.C:5064-U] - 	 0xc3
[response.C:304-U] - Waiting for async event 145, complete
[process.C:1547-U] - Writing to remote memory 7fbbf82c389f from 0x7ffce1480aa0, size = 1 on 14915/14915
[response.C:304-U] - Waiting for async event 146, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3890 from buffer 0x0x34e6e40 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3890 from 0x34e6e40, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 147, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c38a0 from buffer 0x0x9a62ad0 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c38a0 from 0x9a62ad0, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 148, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf82c3897 from buffer 0x0x3606b20 of size 5
[process.C:1547-U] - Writing to remote memory 7fbbf82c3897 from 0x3606b20, size = 5 on 14915/14915
[response.C:304-U] - Waiting for async event 149, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rip
[process.C:3789-U] - Had cached register value
[process.C:3820-U] - Returning register value 4024b2 for register x86_64::rip on 14915
[response.C:304-U] - Waiting for async event 150, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rsp
[process.C:3789-U] - Had cached register value
[process.C:3820-U] - Returning register value 7ffda7784cb8 for register x86_64::rsp on 14915
[response.C:304-U] - Waiting for async event 151, complete
[process.C:3746-U] - Get register value for thread 14915, register x86_64::rbp
[process.C:3789-U] - Had cached register value
[process.C:3820-U] - Returning register value 404670 for register x86_64::rbp on 14915
[response.C:304-U] - Waiting for async event 152, complete
[procset.C:1464-U] - User continuing entire process 14915
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Nop from mailbox
[handler.C:402-H] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-H] - Have event Nop on Nop Handler
[handler.C:437-H] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1523-H] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 1919 for pid 14915:
[linux.C:181-G] - Stopped with signal 7
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x77f
[linux.C:315-G] - Decoded to signal 7
[linux.C:723-G] - Decoded event to signal 7 on 14915/14915
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event Signal is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event Signal to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Signal from mailbox
[process.C:2306-H] - Event Signal is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-H] - Event Signal added to handle list with handler Signal
[handler.C:402-H] - Event Signal added to handle list with handler Callback
[handler.C:419-H] - Have event Signal on Signal
[handler.C:419-H] - Have event Signal on Callback
[handler.C:437-H] - Handling event 'Signal' with handler 'Signal'
[handler.C:437-H] - Handling event 'Signal' with handler 'Callback'
[handler.C:2250-H] - Changing callback state of 14915 before CB
[process.C:4287-H] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-H] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:5657-H] - noteEvent - 1
[handler.C:449-H] - Handler Callback delaying for user thread
[mailbox.C:120-H] - Added event Signal to mailbox, size = 0 + 0 + 1 = 1
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Stopped
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, callback: ditto, code: -H--------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:6170-U] - User triggered event handling
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Polling for events = !F && ((T && !F && F) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Signal from mailbox
[handler.C:398-U] - Have event Signal on Signal (already handled)
[handler.C:402-U] - Event Signal added to handle list with handler Callback
[handler.C:419-U] - Have event Signal on Callback
[handler.C:437-U] - Handling event 'Signal' with handler 'Callback'
[process.C:5675-U] - clearEvent - 0
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:2250-U] - Changing callback state of 14915 before CB
[process.C:4287-U] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-U] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2273-U] - Triggering callback for event 'Signal'
[handler.C:2278-U] - Triggering callback #0 for event 'Signal'
[handler.C:2289-U] - Callback #0 return cbProcStop/cbProcStop
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[handler.C:2307-U] - Handling return value for main process
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2312-U] - Handling return value for child process/thread
[handler.C:2332-U] - Restoring callback state of 14915/14915 after CB
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:6867-U] - User wants to read memory from 0x7fbbf905f248 to 0x0x7ffce1481fdc of size 4
[process.C:1489-U] - Reading from remote memory 7fbbf905f248 to 0x7ffce1481fdc, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 153, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f248 from buffer 0x0x7ffce1481fcc of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f248 from 0x7ffce1481fcc, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 154, complete
[process.C:6867-U] - User wants to read memory from 0x7fbbf905f230 to 0x0x7ffce1481fd8 of size 4
[process.C:1489-U] - Reading from remote memory 7fbbf905f230 to 0x7ffce1481fd8, size = 4 on 14915/14915
[response.C:304-U] - Waiting for async event 155, complete
[process.C:6867-U] - User wants to read memory from 0x7fbbf9067618 to 0x0x7ffce1481fd0 of size 8
[process.C:1489-U] - Reading from remote memory 7fbbf9067618 to 0x7ffce1481fd0, size = 8 on 14915/14915
[response.C:304-U] - Waiting for async event 156, complete
[procset.C:1464-U] - User continuing entire process 14915
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event Nop from mailbox
[handler.C:402-H] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-H] - Have event Nop on Nop Handler
[handler.C:437-H] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1523-H] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 66943 for pid 14915:
[linux.C:181-G] - Stopped with signal 5
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x1057f
[linux.C:315-G] - Decoded to signal 5
[linux.C:473-G] - Decoded event to fork on 14915/14915
[linux.C:525-G] - Postponing event until syscall exit on 14915/14915
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event PostponedSyscall is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event PostponedSyscall to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[process.C:8584-H] - Handler starting to check for events
[process.C:973-H] - Top of waitAndHandleEvents.  Block = false
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:171-H] - Returning event PostponedSyscall from mailbox
[process.C:2306-H] - Event PostponedSyscall is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-H] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-H] - Event PostponedSyscall added to handle list with handler Postponed Syscall
[handler.C:419-H] - Have event PostponedSyscall on Postponed Syscall
[handler.C:437-H] - Handling event 'PostponedSyscall' with handler 'Postponed Syscall'
[process.C:4287-H] - Desyncing 14915/14915 postponed syscall state to level 1
[process.C:4409-H] - Changing postponed syscall state for 14915/14915 from dontcare to running
[process.C:798-H] - At top of syncRunState for 14915
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:3508-H] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-H] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-H] - 14915/14915: setting target state to Running
[process.C:847-H] - Current Threading State for 14915:
[process.C:863-H] - 14915/14915 hand: stopped, gen: stopped, postponed syscall: running, code: --R-------------RSS
[process.C:872-H] - Running plat_syncRunState on 14915
[process.C:2943-H] - intCont on thread 14915/14915
[linux.C:1435-H] - Continuing thread 14915
[linux.C:1508-H] - Calling PTRACE_SYSCALL on 14915 with signal 0
[process.C:8340-H] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-H] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-H] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-H] - Clearing register pool for 14915/14915
[memcache.C:573-H] - Clearing memCache
[process.C:1024-H] - Polling for events = !T && ((? && !? && ?) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:149-H] - Polled mailbox for messages, but none found
[process.C:1043-H] - Returning after handling events
[process.C:1131-H] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[linux.C:175-G] - Waitpid return status 34175 for pid 14915:
[linux.C:181-G] - Stopped with signal 133
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:307-G] - Decoding event for 14915/14915
[linux.C:310-G] - ARM-debug: status 0x857f
[linux.C:315-G] - Decoded to signal 133
[linux.C:324-G] - Decoded event to syscall-stop on 14915/14915
[linux.C:2500-G] - Register x86_64::rip has value 0x7fbbf90e9038
[linux.C:354-G] - Resuming fork event after syscall exit on 14915/14915
[linux.C:357-G] - Parent half of paired event, postponing decode until child arrives
[generator.C:144-G] - Setting generator state to statesync
[generator.C:144-G] - Setting generator state to queueing
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[process.C:6170-U] - User triggered event handling
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Blocking for events = !F && ((T && !F && T) || ? || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:155-U] - Blocking for events from mailbox, queue size = 0
[linux.C:175-G] - Waitpid return status 4991 for pid 14923:
[linux.C:181-G] - Stopped with signal 19
[generator.C:209-G] - Got event
[generator.C:144-G] - Setting generator state to decoding
[linux.C:299-G] - Warning: could not find event for process 14923
[linux.C:307-G] - Decoding event for -1/-1
[linux.C:310-G] - ARM-debug: status 0x137f
[linux.C:315-G] - Decoded to signal 19
[generator.C:144-G] - Setting generator state to statesync
[process.C:2306-G] - Event post-Fork is thread synchronous, marking thread 14915 generator stopped
[process.C:8340-G] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-G] - Changing generator state for 14915/14915 from running to stopped
[generator.C:144-G] - Setting generator state to queueing
[mailbox.C:120-G] - Added event post-Fork to mailbox, size = 1 + 0 + 0 = 1
[generator.C:144-G] - Setting generator state to none
[generator.C:144-G] - Setting generator state to process_blocked
[generator.C:429-G] - Checking for live processes
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:308-G] - No live processes, ret false
[generator.C:431-G] - Checked and found no live processes
[mailbox.C:171-U] - Returning event post-Fork from mailbox
[process.C:2306-U] - Event post-Fork is thread synchronous, marking thread 14915 handler stopped
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:4409-U] - Changing handler state for 14915/14915 from running to stopped
[handler.C:402-U] - Event post-Fork added to handle list with handler Post Fork
[handler.C:402-U] - Event post-Fork added to handle list with handler Callback
[handler.C:402-U] - Event post-Fork added to handle list with handler Post Fork Continue
[handler.C:419-U] - Have event post-Fork on Post Fork
[handler.C:419-U] - Have event post-Fork on Callback
[handler.C:419-U] - Have event post-Fork on Post Fork Continue
[handler.C:437-U] - Handling event 'post-Fork' with handler 'Post Fork'
[handler.C:1147-U] - Handling fork for parent 14915 to child 14923
[process.C:1429-U] - New int_process at 0x9c48688
[process.C:5543-U] - Copying mem_state to new process 14923
[process.C:4312-U] - Restoring 14915/14915 postponed syscall state to level 0
[process.C:4409-U] - Changing postponed syscall state for 14915/14915 from running to dontcare
[process.C:610-U] - Setting up forked process 14923
[process.C:4409-U] - Changing postponed syscall state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing exiting state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing startup state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing pending stop state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing callback state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing breakpoint state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing bp hold state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing breakpoint resume state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing irpc setup state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing irpc wait state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing irpc state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing async state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing internal state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing detach state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing irpc user state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing control authority state for 14923/14923 from none to dontcare
[process.C:4409-U] - Changing user state for 14923/14923 from none to neonatal
[process.C:8340-U] - Adjusting counter NeonatalThreads by 1, before 0, after 1
[process.C:4409-U] - Changing handler state for 14923/14923 from none to neonatal
[process.C:4409-U] - Changing generator state for 14923/14923 from none to neonatal
[process.C:8340-U] - Adjusting counter GeneratorNonExitedThreads by 1, before 1, after 2
[process.C:3465-U] - Creating initial thread 14923/14923, thr_id = 0xffffffffffffffff
[process.C:4409-U] - Changing user state for 14923/14923 from neonatal to neonatal_intermediate
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing handler state for 14923/14923 from neonatal to neonatal_intermediate
[process.C:8340-U] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing generator state for 14923/14923 from neonatal to neonatal_intermediate
[procpool.C:62-U] - Adding process 14923 to pool
[process.C:240-U] - Already have thread 14923 in process 14923
[generator.C:278-G] - Entry to generator::hasLiveProc()
[generator.C:288-G] - Generator has running threads, returning true from hasLiveProc
[generator.C:442-G] - processWait returning true
[generator.C:144-G] - Setting generator state to system_blocked
[generator.C:207-G] - About to getEvent()
[linux.C:154-G] - blocking in waitpid
[unix.C:131-U] - Setting state of initial thread after fork in 14923
[process.C:8340-U] - Adjusting counter GeneratorRunningThreads by -1, before 1, after 0
[process.C:4409-U] - Changing generator state for 14923/14923 from neonatal_intermediate to stopped
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by -1, before 1, after 0
[process.C:8340-U] - Adjusting counter NeonatalThreads by -1, before 1, after 0
[process.C:4409-U] - Changing handler state for 14923/14923 from neonatal_intermediate to stopped
[process.C:4409-U] - Changing user state for 14923/14923 from neonatal_intermediate to running
[sysv.C:242-U] - Refreshing list of loaded libraries
[process.C:1489-U] - Reading from remote memory 400040 to 0x7ffce14819f0, size = 56 on 14923/14923
[process.C:1489-U] - Reading from remote memory 400078 to 0x7ffce14819f0, size = 56 on 14923/14923
[process.C:1489-U] - Reading from remote memory 4000b0 to 0x7ffce14819f0, size = 56 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30b120 to 0x9a62ae0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30b148 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30b6d8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30b6e0 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30bb78 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30bb80 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087d0 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087a8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087b0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087b8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087c0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa3087c8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa000 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa308cb0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa308cb8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa308cc0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa4d0 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa4b8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa4c0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa4c8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa9a0 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa988 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa990 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fa998 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2f9000 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fae58 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fae60 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2fae68 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2f94d0 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2f94b8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2f94c0 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa2f94c8 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 7fbbfa30a998 to 0x1c759d0, size = 40 on 14923/14923
[process.C:1489-U] - Reading from remote memory 400238 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 400240 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 400248 to 0x9c487d0, size = 8 on 14923/14923
[process.C:1489-U] - Reading from remote memory 400250 to 0x9c487d0, size = 8 on 14923/14923
[sysv.C:279-U] - Found library /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none at 0
[sysv.C:281-U] - Creating new library object for /usr/local/bin/testsuite/test4_2.dyn_g++_64_none_none
[sysv.C:279-U] - Found library /usr/local/lib/libdyninstAPI_RT.so at 7fbbf8e57000
[sysv.C:281-U] - Creating new library object for /usr/local/lib/libdyninstAPI_RT.so
[sysv.C:279-U] - Found library /lib64/libstdc++.so.6 at 7fbbf8ad5000
[sysv.C:281-U] - Creating new library object for /lib64/libstdc++.so.6
[sysv.C:279-U] - Found library /lib64/libm.so.6 at 7fbbf87d3000
[sysv.C:281-U] - Creating new library object for /lib64/libm.so.6
[sysv.C:279-U] - Found library /lib64/libgcc_s.so.1 at 7fbbf85bc000
[sysv.C:281-U] - Creating new library object for /lib64/libgcc_s.so.1
[sysv.C:279-U] - Found library /lib64/libc.so.6 at 7fbbf81fb000
[sysv.C:281-U] - Creating new library object for /lib64/libc.so.6
[sysv.C:279-U] - Found library /lib64/libdl.so.2 at 7fbbf7ff7000
[sysv.C:281-U] - Creating new library object for /lib64/libdl.so.2
[sysv.C:279-U] - Found library /lib64/ld-linux-x86-64.so.2 at 7fbbfa0e9000
[sysv.C:281-U] - Creating new library object for /lib64/ld-linux-x86-64.so.2
[process.C:676-U] - Successfully initialized address space for 14923
[handler.C:437-U] - Handling event 'post-Fork' with handler 'Callback'
[handler.C:2250-U] - Changing callback state of 14915 before CB
[process.C:4287-U] - Desyncing 14915/14915 callback state to level 1
[process.C:4409-U] - Changing callback state for 14915/14915 from dontcare to ditto
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2273-U] - Triggering callback for event 'post-Fork'
[handler.C:2278-U] - Triggering callback #0 for event 'post-Fork'
[handler.C:2289-U] - Callback #0 return cbProcStop/cbProcStop
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[handler.C:2307-U] - Handling return value for main process
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4409-U] - Changing user state for 14915/14915 from running to stopped
[handler.C:2312-U] - Handling return value for child process/thread
[handler.C:2232-U] - Callbacks returned process stop
[process.C:4409-U] - Changing user state for 14923/14923 from running to stopped
[handler.C:2332-U] - Restoring callback state of 14915/14915 after CB
[process.C:4312-U] - Restoring 14915/14915 callback state to level 0
[process.C:4409-U] - Changing callback state for 14915/14915 from ditto to dontcare
[handler.C:437-U] - Handling event 'post-Fork' with handler 'Post Fork Continue'
[handler.C:1188-U] - Handling post-fork continue for child 14923
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Nop from mailbox
[handler.C:402-U] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-U] - Have event Nop on Nop Handler
[handler.C:437-U] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-U] - At top of syncRunState for 14923
[process.C:3283-U] - 14923/14923: setting target state to Stopped
[process.C:835-U] - Checking if any ProcStop events on 14923 are ready
[process.C:3283-U] - 14923/14923: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14923:
[process.C:863-U] - 14923/14923 hand: stopped, gen: stopped, user: stopped, code: ----------------SSS
[process.C:872-U] - Running plat_syncRunState on 14923
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:149-U] - Polled mailbox for messages, but none found
[process.C:1043-U] - Returning after handling events
[process.C:1131-U] - Leaving WaitAndHandleEvents with return true, 'cause we're done
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[process.C:8584-H] - Handler starting to check for events
[process.C:8592-H] - Events already handled, going back to sleep
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[int_thread_db.C:1715-U] - Error: Attempt to read user thread info of 14923/14923 before user thread create
[process.C:3746-U] - Get register value for thread 14923, register x86_64::rip
[linux.C:2500-U] - Register x86_64::rip has value 0x7fbbf90e9038
[process.C:3820-U] - Returning register value 7fbbf90e9038 for register x86_64::rip on 14923
[response.C:304-U] - Waiting for async event 197, complete
[process.C:3746-U] - Get register value for thread 14923, register x86_64::rsp
[linux.C:2500-U] - Register x86_64::rsp has value 0x7ffda7784bf0
[process.C:3820-U] - Returning register value 7ffda7784bf0 for register x86_64::rsp on 14923
[response.C:304-U] - Waiting for async event 198, complete
[process.C:3746-U] - Get register value for thread 14923, register x86_64::rbp
[linux.C:2500-U] - Register x86_64::rbp has value 0x7ffda7784c10
[process.C:3820-U] - Returning register value 7ffda7784c10 for register x86_64::rbp on 14923
[response.C:304-U] - Waiting for async event 199, complete
[process.C:6867-U] - User wants to read memory from 0x7fbbf905f228 to 0x0x7ffce1481fbc of size 4
[process.C:1489-U] - Reading from remote memory 7fbbf905f228 to 0x7ffce1481fbc, size = 4 on 14923/14923
[response.C:304-U] - Waiting for async event 200, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1b8 from buffer 0x0x7ffce1481c6c of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1b8 from 0x7ffce1481c6c, size = 4 on 14923/14923
[response.C:304-U] - Waiting for async event 201, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1bc from buffer 0x0x7ffce1481c4c of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1bc from 0x7ffce1481c4c, size = 4 on 14923/14923
[response.C:304-U] - Waiting for async event 202, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f24c from buffer 0x0x7ff744358d1c of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f24c from 0x7ff744358d1c, size = 4 on 14923/14923
[response.C:304-U] - Waiting for async event 203, complete
[process.C:6844-U] - User wants to write memory to remote addr 0x7fbbf905f1b0 from buffer 0x0x7ffce1481c48 of size 4
[process.C:1547-U] - Writing to remote memory 7fbbf905f1b0 from 0x7ffce1481c48, size = 4 on 14923/14923
[response.C:304-U] - Waiting for async event 204, complete
[process.C:6605-U] - Running SYNC RPC
[irpc.C:323-U] - Posting iRPC 0 to process 14915, selecting a thread...
[irpc.C:357-U] - Thread 14915 has 0 running/posted iRPCs
[irpc.C:371-U] - Selected thread 14915 for iRPC 0
[irpc.C:381-U] - Posting iRPC 0 to thread 14915
[process.C:8340-U] - Adjusting counter SyncRPCs by 1, before 0, after 1
[irpc.C:436-U] - RPC 0 already has allocated memory, added to end
[irpc.C:501-U] - Posted iRPC list for 14915:
	U-0(165), 
[process.C:4409-U] - Changing user state for 14915/14915 from stopped to running
[mailbox.C:120-U] - Added event Nop to mailbox, size = 1 + 0 + 0 = 1
[process.C:973-U] - Top of waitAndHandleEvents.  Block = true
[process.C:1024-U] - Polling for events = !F && ((T && !F && F) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event Nop from mailbox
[handler.C:402-U] - Event Nop added to handle list with handler Nop Handler
[handler.C:419-U] - Have event Nop on Nop Handler
[handler.C:437-U] - Handling event 'Nop' with handler 'Nop Handler'
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Running
[process.C:3508-U] - Checking thread 14915/14915 for events thrown before continue
[process.C:3516-U] - Found thread 14915/14915 ready to run IRPC, not continuing
[process.C:4287-U] - Desyncing 14915/14915 irpc setup state to level 1
[process.C:4409-U] - Changing irpc setup state for 14915/14915 from dontcare to stopped
[event.C:133-U] - Setting callback suppress for RPCLaunch
[mailbox.C:120-U] - Added event RPCLaunch to mailbox, size = 1 + 0 + 0 = 1
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Stopped
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, irpc setup: stopped, code: -----S----------RSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:1024-U] - Polling for events = !F && ((T && !T && ?) || F || F || F || F || F || F || F || F)
[mailbox.C:171-U] - Returning event RPCLaunch from mailbox
[handler.C:402-U] - Event RPCLaunch added to handle list with handler iRPC Launch Handler
[handler.C:419-U] - Have event RPCLaunch on iRPC Launch Handler
[handler.C:437-U] - Handling event 'RPCLaunch' with handler 'iRPC Launch Handler'
[irpc.C:1221-U] - Handling next posted irpc 0 on 14915/14915 of type User in state Prepping
[irpc.C:1229-U] - Marking RPC 0 on 14915/14915 as prepped
[irpc.C:1239-U] - Saving RPC state on 14915/14915
[irpc.C:715-U] - Saving state for iRPC 0
[irpc.C:735-U] - Saving original application registers for 14915/14915
[process.C:3632-U] - Reading registers for thread 14915
[process.C:3646-U] - plat_getAllRegisters on 14915/14915
[linux.C:2431-U] - Register x86_64::rip has value     7fbbf90e9038, offset 128
[linux.C:2431-U] - Register x86_64::rax has value             3a4b, offset 80
[linux.C:2431-U] - Register x86_64::rcx has value     7fbbf90e9038, offset 88
[linux.C:2431-U] - Register x86_64::rdx has value                0, offset 96
[linux.C:2431-U] - Register x86_64::rbx has value                0, offset 40
[linux.C:2431-U] - Register x86_64::rsp has value     7ffda7784bf0, offset 152
[linux.C:2431-U] - Register x86_64::rbp has value     7ffda7784c10, offset 32
[linux.C:2431-U] - Register x86_64::rsi has value                0, offset 104
[linux.C:2431-U] - Register x86_64::rdi has value          1200011, offset 112
[linux.C:2431-U] - Register x86_64::r8 has value     7fbbfa2f6740, offset 72
[linux.C:2431-U] - Register x86_64::r9 has value                0, offset 64
[linux.C:2431-U] - Register x86_64::r10 has value     7fbbfa2f6a10, offset 56
[linux.C:2431-U] - Register x86_64::r11 has value              246, offset 48
[linux.C:2431-U] - Register x86_64::r12 has value                0, offset 24
[linux.C:2431-U] - Register x86_64::r13 has value     7ffda7784d90, offset 16
[linux.C:2431-U] - Register x86_64::r14 has value                0, offset 8
[linux.C:2431-U] - Register x86_64::r15 has value                0, offset 0
[linux.C:2431-U] - Register x86_64::ds has value                0, offset 184
[linux.C:2431-U] - Register x86_64::es has value                0, offset 192
[linux.C:2431-U] - Register x86_64::fs has value                0, offset 200
[linux.C:2431-U] - Register x86_64::gs has value                0, offset 208
[linux.C:2431-U] - Register x86_64::cs has value               33, offset 136
[linux.C:2431-U] - Register x86_64::ss has value               2b, offset 160
[linux.C:2431-U] - Register x86_64::flags has value              246, offset 144
[linux.C:2431-U] - Register x86_64::orax has value               38, offset 120
[linux.C:2431-U] - Register x86_64::fsbase has value     7fbbfa2f6740, offset 168
[linux.C:2431-U] - Register x86_64::gsbase has value                0, offset 176
[linux.C:2431-U] - Register x86_64::dr0 has value                0, offset 848
[linux.C:2431-U] - Register x86_64::dr1 has value                0, offset 856
[linux.C:2431-U] - Register x86_64::dr2 has value                0, offset 864
[linux.C:2431-U] - Register x86_64::dr3 has value                0, offset 872
[linux.C:2431-U] - Register x86_64::dr4 has value                0, offset 880
[linux.C:2431-U] - Register x86_64::dr5 has value                0, offset 888
[linux.C:2431-U] - Register x86_64::dr6 has value                0, offset 896
[linux.C:2431-U] - Register x86_64::dr7 has value                0, offset 904
[process.C:3670-U] - Successfully retrieved all registers for 14915
[irpc.C:748-U] - Saving original 165 bytes of memory at 7fbbf9068f10 from application for 14915/14915
[process.C:1489-U] - Reading from remote memory 7fbbf9068f10 to 0xa8a1a00, size = 165 on 14915/14915
[irpc.C:1264-U] - Writing RPC on 14915
[irpc.C:781-U] - Writing rpc 0 memory to 7fbbf9068f10->7fbbf9068fb5
[process.C:1547-U] - Writing to remote memory 7fbbf9068f10 from 0xa8a1770, size = 165 on 14915/14915
[irpc.C:799-U] - IRPC: Setting 14915/14915 PC to 7fbbf9068f18
[process.C:3842-U] - 14915/14915: Setting x86_64::rip to 0x7fbbf9068f18...
[process.C:3867-U] - Setting register x86_64::rip for thread 14915 to 7fbbf9068f18
[linux.C:2791-U] - Set register x86_64::rip (size 8, offset 128) to value 7fbbf9068f18
[irpc.C:828-U] - Moving next iRPC for 14915/14915 to running
[process.C:3974-U] - Thread 14915/14915 is stopped on BP at 0x4024b2 and about to run RPC.  Postponing BP clear.
[process.C:4312-U] - Restoring 14915/14915 irpc setup state to level 0
[process.C:4409-U] - Changing irpc setup state for 14915/14915 from stopped to dontcare
[process.C:798-U] - At top of syncRunState for 14915
[process.C:3283-U] - 14915/14915: setting target state to Running
[process.C:3508-U] - Checking thread 14915/14915 for events thrown before continue
[process.C:835-U] - Checking if any ProcStop events on 14915 are ready
[process.C:3283-U] - 14915/14915: setting target state to Running
[process.C:847-U] - Current Threading State for 14915:
[process.C:863-U] - 14915/14915 hand: stopped, gen: stopped, user: running, code: ----------------RSS
[process.C:872-U] - Running plat_syncRunState on 14915
[process.C:2943-U] - intCont on thread 14915/14915
[linux.C:1435-U] - Continuing thread 14915
[linux.C:1523-U] - Calling PTRACE_CONT on 14915 with signal 0
[process.C:8340-U] - Adjusting counter HandlerRunningThreads by 1, before 0, after 1
[process.C:8340-U] - Adjusting counter SyncRPCRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing handler state for 14915/14915 from stopped to running
[process.C:8340-U] - Adjusting counter GeneratorRunningThreads by 1, before 0, after 1
[process.C:4409-U] - Changing generator state for 14915/14915 from stopped to running
[process.C:5870-U] - Clearing register pool for 14915/14915
[memcache.C:573-U] - Clearing memCache
[process.C:1024-U] - Blocking for events = !F && ((T && !T && ?) || T || ? || ? || ? || ? || ? || ? || ?)
[mailbox.C:155-U] - Blocking for events from mailbox, queue size = 0