make RIOT_CI_BUILD=1 CC_NOCOLOR=1 --no-print-directory -C /home/jialamos/Development/RIOT/tests/conn_can clean all
Building application "tests_conn_can" for "native" with MCU "native".
In file included from /home/jialamos/Development/RIOT/tests/conn_can/main.c:30:
/home/jialamos/Development/RIOT/sys/include/can/can.h:38:10: fatal error: libsocketcan.h: No such file or directory
#include <libsocketcan.h>
^~~~~~~~~~~~~~~~
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
### Problems we want to solve | |
Here's a list of problems we might want to solve. Feel free to discuss | |
- [ ] Application specific configuration (#9825) | |
- [ ] Kernel/modules configurations (expose defaults, override configs, load from external sources, etc) | |
- [ ] All modules seeing all other modules configuration values. This breaks encapsulation and means that a rebuild for EVERYTHING must be triggered each time ANYTHING changes. | |
- [ ] Configurations dependencies (a module might require to set some configuration from another module, but that can be also defined elsewhere. E.g `CFLAGS += -DFF=some_value -DFF=conflicting_val` => the value will be _silently overwritten_. | |
- [ ] Configuration for ~external~ modules (specially if [#8987 (comment)](https://github.com/RIOT-OS/RIOT/pull/8987#issuecomment-383043605) gets implemented) | |
- [ ] Configuration in makefiles can be evil. If the external pkg is not from a trusted source, it could eventually run arbitrary code injected via Makefiles. it is not even p |
This file has been truncated, but you can view the full file.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/home/jialamos/Development/RIOT/boards/acd52832/include/gpio_params.h:49: error: too many consecutive empty lines | |
/home/jialamos/Development/RIOT/boards/arduino-zero/include/periph_conf.h:111: error: comma should be followed by whitespace | |
/home/jialamos/Development/RIOT/boards/arduino-zero/include/periph_conf.h:112: error: comma should be followed by whitespace | |
/home/jialamos/Development/RIOT/boards/arduino-zero/include/periph_conf.h:121: error: comma should be followed by whitespace | |
/home/jialamos/Development/RIOT/boards/arduino-zero/include/periph_conf.h:122: error: comma should be followed by whitespace | |
/home/jialamos/Development/RIOT/boards/avsextrem/board_init.c:10: error: too many consecutive empty lines | |
/home/jialamos/Development/RIOT/boards/avsextrem/board_init.c:28: error: too many consecutive empty lines | |
/home/jialamos/Development/RIOT/boards/avsextrem/board_init.c:44: error: full block {} expected in the control structure | |
/home/jialamos/Development/RIOT/boards/avsextrem/board_init.c:51: error: full |
This file has been truncated, but you can view the full file.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
diff --git a/boards/acd52832/include/gpio_params.h b/boards/acd52832/include/gpio_params.h | |
index 8acaa54bc..05991afbe 100644 | |
--- a/boards/acd52832/include/gpio_params.h | |
+++ b/boards/acd52832/include/gpio_params.h | |
@@ -30,7 +30,7 @@ extern "C" { | |
/** | |
* @brief LED configuration | |
*/ | |
-static const saul_gpio_params_t saul_gpio_params[] = | |
+static const saul_gpio_params_t saul_gpio_params[] = |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Case 1) Unaligned |=, +=, etc. | |
- PINMODE1 |= BIT1; // No Pullup for CS | |
- FIO0DIR |= BIT16; // CS as output | |
- FIO0SET = BIT16; // drive cs inactive | |
- FIO0DIR |= BIT18 + BIT15; // SPi Output | |
+ PINMODE1 |= BIT1; // No Pullup for CS | |
+ FIO0DIR |= BIT16; // CS as output | |
+ FIO0SET = BIT16; // drive cs inactive | |
+ FIO0DIR |= BIT18 + BIT15; // SPi Output |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/home/jialamos/Development/RIOT/dist/tools/pyterm/pyterm -p "/dev/ttyACM1" -b "115200" | |
2018-01-11 10:16:22,105 - INFO # Connect to serial port /dev/ttyACM1 | |
Welcome to pyterm! | |
Type '/exit' to exit. | |
2018-01-11 10:16:35,133 - INFO # [DEBG]-MAC-----: SrcAddrMatch - Cleared all entries | |
2018-01-11 10:16:35,140 - INFO # [DEBG]-MAC-----: Idle mode: Radio sleeping | |
2018-01-11 10:16:35,146 - INFO # [DEBG]-MAC-----: Idle mode: Radio receiving on channel 26 | |
2018-01-11 10:16:35,151 - INFO # mai[DEBG]-MAC-----: Idle mode: Radio sleeping | |
2018-01-11 10:16:35,154 - INFO # [INFO]-MLE-----: Role -> Detached | |
2018-01-11 10:16:35,157 - INFO # [INFO]-MLE-----: Attempt to attach |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
2018-01-10 19:10:06,405 - INFO # [DEBG]-MAC-----: SrcAddrMatch - Cleared all entries | |
2018-01-10 19:10:06,412 - INFO # [DEBG]-MAC-----: Idle mode: Radio sleeping | |
2018-01-10 19:10:06,417 - INFO # [DEBG]-MAC-----: Idle mode: Radio receiving on channel 26 | |
2018-01-10 19:10:06,422 - INFO # mai[DEBG]-MAC-----: Idle mode: Radio sleeping | |
2018-01-10 19:10:06,426 - INFO # [INFO]-MLE-----: Role -> Detached | |
2018-01-10 19:10:06,429 - INFO # [INFO]-MLE-----: Attempt to attach | |
2018-01-10 19:10:06,435 - INFO # [DEBG]-MAC-----: Idle mode: Radio receiving on channel 26 | |
2018-01-10 19:10:06,446 - INFO # n(): [INFO]-MLE-----: Notifier: StateChanged (0x101315) [ Ip6+ Role MLAddr KeySeqCntr NetData Ip6Mult+ MstrKey ] | |
2018-01-10 19:10:06,451 - INFO # [DEBG]-MLE-----: Store Network Information | |
2018-01-10 19:10:06,458 - INFO # This is RIOT! (Version: 2018.01-devel-920-g98b49-archlinux-openthread_ftd_ncp) |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
How complex MAC layers are integrated to netif? | |
How to set specific options from application to MAC? |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
1492720845.417145;m3-222;> ipaddr | |
1492720845.418116;m3-222;fdde:ad00:beef:0:0:ff:fe00:802 | |
1492720845.419021;m3-222;fdde:ad00:beef:0:b97d:616b:42cf:308f | |
1492720845.419824;m3-222;fe80:0:0:0:a08b:4767:185f:d58f | |
1492720845.420002;m3-222;Done | |
m3-276;ping fdde:ad00:beef:0:b97d:616b:42cf:308f | |
1492720854.411125;m3-276;> ping fdde:ad00:beef:0:b97d:616b:42cf:308f | |
1492720854.413849;m3-276;> 8 bytes from fdde:ad00:beef:0:b97d:616b:42cf:308f: icmp_seq=1 hlim=64 time=0ms | |
m3-1;ping fdde:ad00:beef:0:b97d:616b:42cf:308f | |
1492720866.891638;m3-1;> ping fdde:ad00:beef:0:b97d:616b:42cf:308f |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/Users/jia200x/Development/RIOT/examples/openthread_example/bin/pkg/native/openthread/include/openthread-types.h:114:29: error: commas at | |
the end of enumerator lists are a C++11 extension [-Werror,-Wc++11-extensions] | |
kThreadError_Error = 255, | |
^ | |
/Users/jia200x/Development/RIOT/examples/openthread_example/bin/pkg/native/openthread/include/openthread-types.h:226:37: error: commas at | |
the end of enumerator lists are a C++11 extension [-Werror,-Wc++11-extensions] | |
OT_IP6_ML_ADDR_CHANGED = 1 << 8, ///< The mesh-local address has changed | |
^~ | |
/Users/jia200x/Development/RIOT/examples/openthread_example/bin/pkg/native/openthread/include/openthread-types.h:245:25: error: commas at | |
the end of enumerator lists are a C++11 extension [-Werror,-Wc++11-extensions] |