Created
May 13, 2015 13:01
-
-
Save jimthree/a5d47fd2aace6fe637d9 to your computer and use it in GitHub Desktop.
AVRdude.conf
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# $Id: avrdude.conf.in 1236 2013-09-16 19:40:15Z joerg_wunsch $ -*- text -*- | |
# | |
# AVRDUDE Configuration File | |
# | |
# This file contains configuration data used by AVRDUDE which describes | |
# the programming hardware pinouts and also provides part definitions. | |
# AVRDUDE's "-C" command line option specifies the location of the | |
# configuration file. The "-c" option names the programmer configuration | |
# which must match one of the entry's "id" parameter. The "-p" option | |
# identifies which part AVRDUDE is going to be programming and must match | |
# one of the parts' "id" parameter. | |
# | |
# Possible entry formats are: | |
# | |
# programmer | |
# parent <id> # optional parent | |
# id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings | |
# desc = <description> ; # quoted string | |
# type = <type>; # programmer type, quoted string | |
# # supported programmer types can be listed by "-c ?type" | |
# connection_type = parallel | serial | usb | |
# baudrate = <num> ; # baudrate for avr910-programmer | |
# vcc = <num1> [, <num2> ... ] ; # pin number(s) | |
# buff = <num1> [, <num2> ... ] ; # pin number(s) | |
# reset = <num> ; # pin number | |
# sck = <num> ; # pin number | |
# mosi = <num> ; # pin number | |
# miso = <num> ; # pin number | |
# errled = <num> ; # pin number | |
# rdyled = <num> ; # pin number | |
# pgmled = <num> ; # pin number | |
# vfyled = <num> ; # pin number | |
# usbvid = <hexnum>; # USB VID (Vendor ID) | |
# usbpid = <hexnum>; # USB PID (Product ID) | |
# usbdev = <interface>; # USB interface or other device info | |
# usbvendor = <vendorname>; # USB Vendor Name | |
# usbproduct = <productname>; # USB Product Name | |
# usbsn = <serialno>; # USB Serial Number | |
# | |
# To invert a bit, use = ~ <num>, the spaces are important. | |
# For a pin list all pins must be inverted. | |
# A single pin can be specified as usual = ~ <num>, for lists | |
# specify it as follows = ~ ( <num> [, <num2> ... ] ) . | |
# ; | |
# | |
# part | |
# id = <id> ; # quoted string | |
# desc = <description> ; # quoted string | |
# has_jtag = <yes/no> ; # part has JTAG i/f | |
# has_debugwire = <yes/no> ; # part has debugWire i/f | |
# has_pdi = <yes/no> ; # part has PDI i/f | |
# has_tpi = <yes/no> ; # part has TPI i/f | |
# devicecode = <num> ; # deprecated, use stk500_devcode | |
# stk500_devcode = <num> ; # numeric | |
# avr910_devcode = <num> ; # numeric | |
# signature = <num> <num> <num> ; # signature bytes | |
# chip_erase_delay = <num> ; # micro-seconds | |
# reset = dedicated | io; | |
# retry_pulse = reset | sck; | |
# pgm_enable = <instruction format> ; | |
# chip_erase = <instruction format> ; | |
# chip_erase_delay = <num> ; # chip erase delay (us) | |
# # STK500 parameters (parallel programming IO lines) | |
# pagel = <num> ; # pin name in hex, i.e., 0xD7 | |
# bs2 = <num> ; # pin name in hex, i.e., 0xA0 | |
# serial = <yes/no> ; # can use serial downloading | |
# parallel = <yes/no/pseudo>; # can use par. programming | |
# # STK500v2 parameters, to be taken from Atmel's XML files | |
# timeout = <num> ; | |
# stabdelay = <num> ; | |
# cmdexedelay = <num> ; | |
# synchloops = <num> ; | |
# bytedelay = <num> ; | |
# pollvalue = <num> ; | |
# pollindex = <num> ; | |
# predelay = <num> ; | |
# postdelay = <num> ; | |
# pollmethod = <num> ; | |
# mode = <num> ; | |
# delay = <num> ; | |
# blocksize = <num> ; | |
# readsize = <num> ; | |
# hvspcmdexedelay = <num> ; | |
# # STK500v2 HV programming parameters, from XML | |
# pp_controlstack = <num>, <num>, ...; # PP only | |
# hvsp_controlstack = <num>, <num>, ...; # HVSP only | |
# hventerstabdelay = <num>; | |
# progmodedelay = <num>; # PP only | |
# latchcycles = <num>; | |
# togglevtg = <num>; | |
# poweroffdelay = <num>; | |
# resetdelayms = <num>; | |
# resetdelayus = <num>; | |
# hvleavestabdelay = <num>; | |
# resetdelay = <num>; | |
# synchcycles = <num>; # HVSP only | |
# chiperasepulsewidth = <num>; # PP only | |
# chiperasepolltimeout = <num>; | |
# chiperasetime = <num>; # HVSP only | |
# programfusepulsewidth = <num>; # PP only | |
# programfusepolltimeout = <num>; | |
# programlockpulsewidth = <num>; # PP only | |
# programlockpolltimeout = <num>; | |
# # JTAG ICE mkII parameters, also from XML files | |
# allowfullpagebitstream = <yes/no> ; | |
# enablepageprogramming = <yes/no> ; | |
# idr = <num> ; # IO addr of IDR (OCD) reg. | |
# rampz = <num> ; # IO addr of RAMPZ reg. | |
# spmcr = <num> ; # mem addr of SPMC[S]R reg. | |
# eecr = <num> ; # mem addr of EECR reg. | |
# # (only when != 0x3c) | |
# is_at90s1200 = <yes/no> ; # AT90S1200 part | |
# is_avr32 = <yes/no> ; # AVR32 part | |
# | |
# memory <memtype> | |
# paged = <yes/no> ; # yes / no | |
# size = <num> ; # bytes | |
# page_size = <num> ; # bytes | |
# num_pages = <num> ; # numeric | |
# min_write_delay = <num> ; # micro-seconds | |
# max_write_delay = <num> ; # micro-seconds | |
# readback_p1 = <num> ; # byte value | |
# readback_p2 = <num> ; # byte value | |
# pwroff_after_write = <yes/no> ; # yes / no | |
# read = <instruction format> ; | |
# write = <instruction format> ; | |
# read_lo = <instruction format> ; | |
# read_hi = <instruction format> ; | |
# write_lo = <instruction format> ; | |
# write_hi = <instruction format> ; | |
# loadpage_lo = <instruction format> ; | |
# loadpage_hi = <instruction format> ; | |
# writepage = <instruction format> ; | |
# ; | |
# ; | |
# | |
# If any of the above parameters are not specified, the default value | |
# of 0 is used for numerics or the empty string ("") for string | |
# values. If a required parameter is left empty, AVRDUDE will | |
# complain. | |
# | |
# Parts can also inherit parameters from previously defined parts | |
# using the following syntax. In this case specified integer and | |
# string values override parameter values from the parent part. New | |
# memory definitions are added to the definitions inherited from the | |
# parent. | |
# | |
# part parent <id> # quoted string | |
# id = <id> ; # quoted string | |
# <any set of other parameters from the list above> | |
# ; | |
# | |
# NOTES: | |
# * 'devicecode' is the device code used by the STK500 (see codes | |
# listed below) | |
# * Not all memory types will implement all instructions. | |
# * AVR Fuse bits and Lock bits are implemented as a type of memory. | |
# * Example memory types are: | |
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high | |
# fuse), "signature", "calibration", "lock" | |
# * The memory type specified on the avrdude command line must match | |
# one of the memory types defined for the specified chip. | |
# * The pwroff_after_write flag causes avrdude to attempt to | |
# power the device off and back on after an unsuccessful write to | |
# the affected memory area if VCC programmer pins are defined. If | |
# VCC pins are not defined for the programmer, a message | |
# indicating that the device needs a power-cycle is printed out. | |
# This flag was added to work around a problem with the | |
# at90s4433/2333's; see the at90s4433 errata at: | |
# | |
# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf | |
# | |
# INSTRUCTION FORMATS | |
# | |
# Instruction formats are specified as a comma seperated list of | |
# string values containing information (bit specifiers) about each | |
# of the 32 bits of the instruction. Bit specifiers may be one of | |
# the following formats: | |
# | |
# '1' = the bit is always set on input as well as output | |
# | |
# '0' = the bit is always clear on input as well as output | |
# | |
# 'x' = the bit is ignored on input and output | |
# | |
# 'a' = the bit is an address bit, the bit-number matches this bit | |
# specifier's position within the current instruction byte | |
# | |
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 | |
# is address bit 12 on input, a0 is address bit 0. | |
# | |
# 'i' = the bit is an input data bit | |
# | |
# 'o' = the bit is an output data bit | |
# | |
# Each instruction must be composed of 32 bit specifiers. The | |
# instruction specification closely follows the instruction data | |
# provided in Atmel's data sheets for their parts. | |
# | |
# See below for some examples. | |
# | |
# | |
# The following are STK500 part device codes to use for the | |
# "devicecode" field of the part. These came from Atmel's software | |
# section avr061.zip which accompanies the application note | |
# AVR061 available from: | |
# | |
# http://www.atmel.com/dyn/resources/prod_documents/doc2525.pdf | |
# | |
#define ATTINY10 0x10 /* the _old_ one that never existed! */ | |
#define ATTINY11 0x11 | |
#define ATTINY12 0x12 | |
#define ATTINY15 0x13 | |
#define ATTINY13 0x14 | |
#define ATTINY22 0x20 | |
#define ATTINY26 0x21 | |
#define ATTINY28 0x22 | |
#define ATTINY2313 0x23 | |
#define AT90S1200 0x33 | |
#define AT90S2313 0x40 | |
#define AT90S2323 0x41 | |
#define AT90S2333 0x42 | |
#define AT90S2343 0x43 | |
#define AT90S4414 0x50 | |
#define AT90S4433 0x51 | |
#define AT90S4434 0x52 | |
#define ATMEGA48 0x59 | |
#define AT90S8515 0x60 | |
#define AT90S8535 0x61 | |
#define AT90C8534 0x62 | |
#define ATMEGA8515 0x63 | |
#define ATMEGA8535 0x64 | |
#define ATMEGA8 0x70 | |
#define ATMEGA88 0x73 | |
#define ATMEGA168 0x86 | |
#define ATMEGA161 0x80 | |
#define ATMEGA163 0x81 | |
#define ATMEGA16 0x82 | |
#define ATMEGA162 0x83 | |
#define ATMEGA169 0x84 | |
#define ATMEGA323 0x90 | |
#define ATMEGA32 0x91 | |
#define ATMEGA64 0xA0 | |
#define ATMEGA103 0xB1 | |
#define ATMEGA128 0xB2 | |
#define AT90CAN128 0xB3 | |
#define AT90CAN64 0xB3 | |
#define AT90CAN32 0xB3 | |
#define AT86RF401 0xD0 | |
#define AT89START 0xE0 | |
#define AT89S51 0xE0 | |
#define AT89S52 0xE1 | |
# The following table lists the devices in the original AVR910 | |
# appnote: | |
# |Device |Signature | Code | | |
# +-------+----------+------+ | |
# |tiny12 | 1E 90 05 | 0x55 | | |
# |tiny15 | 1E 90 06 | 0x56 | | |
# | | | | | |
# | S1200 | 1E 90 01 | 0x13 | | |
# | | | | | |
# | S2313 | 1E 91 01 | 0x20 | | |
# | S2323 | 1E 91 02 | 0x48 | | |
# | S2333 | 1E 91 05 | 0x34 | | |
# | S2343 | 1E 91 03 | 0x4C | | |
# | | | | | |
# | S4414 | 1E 92 01 | 0x28 | | |
# | S4433 | 1E 92 03 | 0x30 | | |
# | S4434 | 1E 92 02 | 0x6C | | |
# | | | | | |
# | S8515 | 1E 93 01 | 0x38 | | |
# | S8535 | 1E 93 03 | 0x68 | | |
# | | | | | |
# |mega32 | 1E 95 01 | 0x72 | | |
# |mega83 | 1E 93 05 | 0x65 | | |
# |mega103| 1E 97 01 | 0x41 | | |
# |mega161| 1E 94 01 | 0x60 | | |
# |mega163| 1E 94 02 | 0x64 | | |
# Appnote AVR109 also has a table of AVR910 device codes, which | |
# lists: | |
# dev avr910 signature | |
# ATmega8 0x77 0x1E 0x93 0x07 | |
# ATmega8515 0x3B 0x1E 0x93 0x06 | |
# ATmega8535 0x6A 0x1E 0x93 0x08 | |
# ATmega16 0x75 0x1E 0x94 0x03 | |
# ATmega162 0x63 0x1E 0x94 0x04 | |
# ATmega163 0x66 0x1E 0x94 0x02 | |
# ATmega169 0x79 0x1E 0x94 0x05 | |
# ATmega32 0x7F 0x1E 0x95 0x02 | |
# ATmega323 0x73 0x1E 0x95 0x01 | |
# ATmega64 0x46 0x1E 0x96 0x02 | |
# ATmega128 0x44 0x1E 0x97 0x02 | |
# | |
# These codes refer to "BOOT" device codes which are apparently | |
# different than standard device codes, for whatever reasons | |
# (often one above the standard code). | |
# There are several extended versions of AVR910 implementations around | |
# in the Internet. These add the following codes (only devices that | |
# actually exist are listed): | |
# ATmega8515 0x3A | |
# ATmega128 0x43 | |
# ATmega64 0x45 | |
# ATtiny26 0x5E | |
# ATmega8535 0x69 | |
# ATmega32 0x72 | |
# ATmega16 0x74 | |
# ATmega8 0x76 | |
# ATmega169 0x78 | |
# | |
# Overall avrdude defaults; suitable for ~/.avrduderc | |
# | |
default_parallel = "lpt1"; | |
default_serial = "com1"; | |
# default_bitclock = 2.5; | |
# Turn off safemode by default | |
#default_safemode = no; | |
# | |
# PROGRAMMER DEFINITIONS | |
# | |
# http://wiring.org.co/ | |
# Basically STK500v2 protocol, with some glue to trigger the | |
# bootloader. | |
programmer | |
id = "wiring"; | |
desc = "Wiring"; | |
type = "wiring"; | |
connection_type = serial; | |
; | |
programmer | |
id = "arduino"; | |
desc = "Arduino"; | |
type = "arduino"; | |
connection_type = serial; | |
; | |
# this will interface with the chips on these programmers: | |
# | |
# http://real.kiev.ua/old/avreal/en/adapters | |
# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml | |
# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html | |
# http://www.ethernut.de/en/hardware/turtelizer/index.html | |
# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html | |
# http://dangerousprototypes.com/docs/FT2232_breakout_board | |
# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H | |
# http://flashrom.org/FT2232SPI_Programmer | |
# | |
# The drivers will look for a specific device and use the first one found. | |
# If you have mulitple devices, then look for unique information (like SN) | |
# And fill that in here. | |
# | |
# Note that the pin numbers for the main ISP signals (reset, sck, | |
# mosi, miso) are fixed and cannot be changed, since they must match | |
# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of | |
# these FTDI ICs has been designed. | |
programmer | |
id = "avrftdi"; | |
desc = "FT2232D based generic programmer"; | |
type = "avrftdi"; | |
connection_type = usb; | |
usbvid = 0x0403; | |
usbpid = 0x6010; | |
usbvendor = ""; | |
usbproduct = ""; | |
usbdev = "A"; | |
usbsn = ""; | |
#ISP-signals - lower ADBUS-Nibble (default) | |
reset = 3; | |
sck = 0; | |
mosi = 1; | |
miso = 2; | |
#LED SIGNALs - higher ADBUS-Nibble | |
# errled = 4; | |
# rdyled = 5; | |
# pgmled = 6; | |
# vfyled = 7; | |
#Buffer Signal - ACBUS - Nibble | |
# buff = 8; | |
; | |
# This is an implementation of the above with a buffer IC (74AC244) and | |
# 4 LEDs directly attached, all active low. | |
programmer | |
id = "2232HIO"; | |
desc = "FT2232H based generic programmer"; | |
type = "avrftdi"; | |
connection_type = usb; | |
usbvid = 0x0403; | |
# Note: This PID is reserved for generic H devices and | |
# should be programmed into the EEPROM | |
# usbpid = 0x8A48; | |
usbpid = 0x6010; | |
usbdev = "A"; | |
usbvendor = ""; | |
usbproduct = ""; | |
usbsn = ""; | |
#ISP-signals | |
reset = 3; | |
sck = 0; | |
mosi = 1; | |
miso = 2; | |
buff = ~4; | |
#LED SIGNALs | |
errled = ~ 11; | |
rdyled = ~ 14; | |
pgmled = ~ 13; | |
vfyled = ~ 12; | |
; | |
#The FT4232H can be treated as FT2232H, but it has a different USB | |
#device ID of 0x6011. | |
programmer parent "avrftdi" | |
id = "4232h"; | |
desc = "FT4232H based generic programmer"; | |
usbpid = 0x6011; | |
; | |
programmer | |
id = "jtagkey"; | |
desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2"; | |
type = "avrftdi"; | |
connection_type = usb; | |
usbvid = 0x0403; | |
# Note: This PID is used in all JTAGKey variants | |
usbpid = 0xCFF8; | |
usbdev = "A"; | |
usbvendor = ""; | |
usbproduct = ""; | |
usbsn = ""; | |
#ISP-signals => 20 - Pin connector on JTAGKey | |
reset = 3; # TMS 7 violet | |
sck = 0; # TCK 9 white | |
mosi = 1; # TDI 5 green | |
miso = 2; # TDO 13 orange | |
buff = ~4; | |
# VTG VREF 1 brown with red tip | |
# GND GND 20 black | |
# The colors are on the 20 pin breakout cable | |
# from Amontec | |
; | |
# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1" | |
# You can find it as "OpenJTAG ARM JTAG USB" in the internet. | |
# (But there are also several projects called Open JTAG, eg. | |
# http://www.openjtag.org, which are completely different.) | |
# http://www.100ask.net/shop/english.html (website seems to be outdated) | |
# http://item.taobao.com/item.htm?id=1559277013 | |
# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!) | |
# some other sources which call it O-Link | |
# http://www.andahammer.com/olink/ | |
# http://www.developmentboard.net/31-o-link-debugger.html | |
# http://armwerks.com/catalog/o-link-debugger-copy/ | |
# or just have a look at ebay ... | |
# It is basically the same entry as jtagkey with different usb ids. | |
programmer parent "jtagkey" | |
id = "o-link"; | |
desc = "O-Link, OpenJTAG from www.100ask.net"; | |
usbvid = 0x1457; | |
usbpid = 0x5118; | |
usbvendor = "www.100ask.net"; | |
usbproduct = "USB<=>JTAG&RS232"; | |
; | |
# http://wiki.openmoko.org/wiki/Debug_Board_v3 | |
programmer | |
id = "openmoko"; | |
desc = "Openmoko debug board (v3)"; | |
type = "avrftdi"; | |
usbvid = 0x1457; | |
usbpid = 0x5118; | |
usbdev = "A"; | |
usbvendor = ""; | |
usbproduct = ""; | |
usbsn = ""; | |
reset = 3; # TMS 7 | |
sck = 0; # TCK 9 | |
mosi = 1; # TDI 5 | |
miso = 2; # TDO 13 | |
; | |
# Only Rev. A boards. | |
# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf | |
programmer | |
id = "lm3s811"; | |
desc = "Luminary Micro LM3S811 Eval Board (Rev. A)"; | |
type = "avrftdi"; | |
connection_type = usb; | |
usbvid = 0x0403; | |
usbpid = 0xbcd9; | |
usbvendor = "LMI"; | |
usbproduct = "LM3S811 Evaluation Board"; | |
usbdev = "A"; | |
usbsn = ""; | |
#ISP-signals - lower ACBUS-Nibble (default) | |
reset = 3; | |
sck = 0; | |
mosi = 1; | |
miso = 2; | |
# Enable correct buffers | |
buff = 7; | |
; | |
programmer | |
id = "avrisp"; | |
desc = "Atmel AVR ISP"; | |
type = "stk500"; | |
connection_type = serial; | |
; | |
programmer | |
id = "avrispv2"; | |
desc = "Atmel AVR ISP V2"; | |
type = "stk500v2"; | |
connection_type = serial; | |
; | |
programmer | |
id = "avrispmkII"; | |
desc = "Atmel AVR ISP mkII"; | |
type = "stk500v2"; | |
connection_type = usb; | |
; | |
programmer parent "avrispmkII" | |
id = "avrisp2"; | |
; | |
programmer | |
id = "buspirate"; | |
desc = "The Bus Pirate"; | |
type = "buspirate"; | |
connection_type = serial; | |
; | |
programmer | |
id = "buspirate_bb"; | |
desc = "The Bus Pirate (bitbang interface, supports TPI)"; | |
type = "buspirate_bb"; | |
connection_type = serial; | |
# pins are bits in bitbang byte (numbers are 87654321) | |
# 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS | |
reset = 1; | |
sck = 3; | |
mosi = 4; | |
miso = 2; | |
#vcc = 7; This is internally set independent of this setting. | |
; | |
# This is supposed to be the "default" STK500 entry. | |
# Attempts to select the correct firmware version | |
# by probing for it. Better use one of the entries | |
# below instead. | |
programmer | |
id = "stk500"; | |
desc = "Atmel STK500"; | |
type = "stk500generic"; | |
connection_type = serial; | |
; | |
programmer | |
id = "stk500v1"; | |
desc = "Atmel STK500 Version 1.x firmware"; | |
type = "stk500"; | |
connection_type = serial; | |
; | |
programmer | |
id = "mib510"; | |
desc = "Crossbow MIB510 programming board"; | |
type = "stk500"; | |
connection_type = serial; | |
; | |
programmer | |
id = "stk500v2"; | |
desc = "Atmel STK500 Version 2.x firmware"; | |
type = "stk500v2"; | |
connection_type = serial; | |
; | |
programmer | |
id = "stk500pp"; | |
desc = "Atmel STK500 V2 in parallel programming mode"; | |
type = "stk500pp"; | |
connection_type = serial; | |
; | |
programmer | |
id = "stk500hvsp"; | |
desc = "Atmel STK500 V2 in high-voltage serial programming mode"; | |
type = "stk500hvsp"; | |
connection_type = serial; | |
; | |
programmer | |
id = "stk600"; | |
desc = "Atmel STK600"; | |
type = "stk600"; | |
connection_type = usb; | |
; | |
programmer | |
id = "stk600pp"; | |
desc = "Atmel STK600 in parallel programming mode"; | |
type = "stk600pp"; | |
connection_type = usb; | |
; | |
programmer | |
id = "stk600hvsp"; | |
desc = "Atmel STK600 in high-voltage serial programming mode"; | |
type = "stk600hvsp"; | |
connection_type = usb; | |
; | |
programmer | |
id = "avr910"; | |
desc = "Atmel Low Cost Serial Programmer"; | |
type = "avr910"; | |
connection_type = serial; | |
; | |
programmer | |
id = "ft245r"; | |
desc = "FT245R Synchronous BitBang"; | |
type = "ftdi_syncbb"; | |
connection_type = usb; | |
miso = 1; # D1 | |
sck = 0; # D0 | |
mosi = 2; # D2 | |
reset = 4; # D4 | |
; | |
programmer | |
id = "ft232r"; | |
desc = "FT232R Synchronous BitBang"; | |
type = "ftdi_syncbb"; | |
connection_type = usb; | |
miso = 1; # RxD | |
sck = 0; # RTS | |
mosi = 2; # TxD | |
reset = 4; # DTR | |
; | |
# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega | |
programmer | |
id = "bwmega"; | |
desc = "BitWizard ftdi_atmega builtin programmer"; | |
type = "ftdi_syncbb"; | |
connection_type = usb; | |
miso = 5; # DSR | |
sck = 6; # DCD | |
mosi = 3; # CTS | |
reset = 7; # RI | |
; | |
# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html | |
# Note: pins are numbered from 1! | |
programmer | |
id = "arduino-ft232r"; | |
desc = "Arduino: FT232R connected to ISP"; | |
type = "ftdi_syncbb"; | |
connection_type = usb; | |
miso = 3; # CTS X3(1) | |
sck = 5; # DSR X3(2) | |
mosi = 6; # DCD X3(3) | |
reset = 7; # RI X3(4) | |
; | |
# website mentioned above uses this id | |
programmer parent "arduino-ft232r" | |
id = "diecimila"; | |
desc = "alias for arduino-ft232r"; | |
; | |
programmer | |
id = "usbasp"; | |
desc = "USBasp, http://www.fischl.de/usbasp/"; | |
type = "usbasp"; | |
connection_type = usb; | |
usbvid = 0x16C0; # VOTI | |
usbpid = 0x05DC; # Obdev's free shared PID | |
usbvendor = "www.fischl.de"; | |
usbproduct = "USBasp"; | |
# following variants are autodetected for id "usbasp" | |
# original usbasp from fischl.de | |
# see above "usbasp" | |
# old usbasp from fischl.de | |
#usbvid = 0x03EB; # ATMEL | |
#usbpid = 0xC7B4; # (unoffical) USBasp | |
#usbvendor = "www.fischl.de"; | |
#usbproduct = "USBasp"; | |
# NIBObee (only if -P nibobee is given on command line) | |
# see below "nibobee" | |
; | |
programmer | |
id = "nibobee"; | |
desc = "NIBObee"; | |
type = "usbasp"; | |
connection_type = usb; | |
usbvid = 0x16C0; # VOTI | |
usbpid = 0x092F; # NIBObee PID | |
usbvendor = "www.nicai-systems.com"; | |
usbproduct = "NIBObee"; | |
; | |
programmer | |
id = "usbasp-clone"; | |
desc = "Any usbasp clone with correct VID/PID"; | |
type = "usbasp"; | |
connection_type = usb; | |
usbvid = 0x16C0; # VOTI | |
usbpid = 0x05DC; # Obdev's free shared PID | |
#usbvendor = ""; | |
#usbproduct = ""; | |
; | |
programmer | |
id = "usbtiny"; | |
desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; | |
type = "usbtiny"; | |
connection_type = usb; | |
usbvid = 0x1781; | |
usbpid = 0x0c9f; | |
baudrate = 9600; | |
; | |
programmer | |
id = "arduinoisp"; | |
desc = " "; | |
type = "usbtiny"; | |
connection_type = usb; | |
usbvid = 0x2341; | |
usbpid = 0x0049; | |
; | |
programmer | |
id = "butterfly"; | |
desc = "Atmel Butterfly Development Board"; | |
type = "butterfly"; | |
connection_type = serial; | |
; | |
programmer | |
id = "avr109"; | |
desc = "Atmel AppNote AVR109 Boot Loader"; | |
type = "butterfly"; | |
connection_type = serial; | |
; | |
programmer | |
id = "avr911"; | |
desc = "Atmel AppNote AVR911 AVROSP"; | |
type = "butterfly"; | |
connection_type = serial; | |
; | |
# suggested in http://forum.mikrokopter.de/topic-post48317.html | |
programmer | |
id = "mkbutterfly"; | |
desc = "Mikrokopter.de Butterfly"; | |
type = "butterfly_mk"; | |
connection_type = serial; | |
; | |
programmer parent "mkbutterfly" | |
id = "butterfly_mk"; | |
; | |
programmer | |
id = "jtagmkI"; | |
desc = "Atmel JTAG ICE (mkI)"; | |
baudrate = 115200; # default is 115200 | |
type = "jtagmki"; | |
connection_type = serial; | |
; | |
# easier to type | |
programmer parent "jtagmkI" | |
id = "jtag1"; | |
; | |
# easier to type | |
programmer parent "jtag1" | |
id = "jtag1slow"; | |
baudrate = 19200; | |
; | |
# The JTAG ICE mkII has both, serial and USB connectivity. As it is | |
# mostly used through USB these days (AVR Studio 5 only supporting it | |
# that way), we make connection_type = usb the default. Users are | |
# still free to use a serial port with the -P option. | |
programmer | |
id = "jtagmkII"; | |
desc = "Atmel JTAG ICE mkII"; | |
baudrate = 19200; # default is 19200 | |
type = "jtagmkii"; | |
connection_type = usb; | |
; | |
# easier to type | |
programmer parent "jtagmkII" | |
id = "jtag2slow"; | |
; | |
# JTAG ICE mkII @ 115200 Bd | |
programmer parent "jtag2slow" | |
id = "jtag2fast"; | |
baudrate = 115200; | |
; | |
# make the fast one the default, people will love that | |
programmer parent "jtag2fast" | |
id = "jtag2"; | |
; | |
# JTAG ICE mkII in ISP mode | |
programmer | |
id = "jtag2isp"; | |
desc = "Atmel JTAG ICE mkII in ISP mode"; | |
baudrate = 115200; | |
type = "jtagmkii_isp"; | |
connection_type = usb; | |
; | |
# JTAG ICE mkII in debugWire mode | |
programmer | |
id = "jtag2dw"; | |
desc = "Atmel JTAG ICE mkII in debugWire mode"; | |
baudrate = 115200; | |
type = "jtagmkii_dw"; | |
connection_type = usb; | |
; | |
# JTAG ICE mkII in AVR32 mode | |
programmer | |
id = "jtagmkII_avr32"; | |
desc = "Atmel JTAG ICE mkII im AVR32 mode"; | |
baudrate = 115200; | |
type = "jtagmkii_avr32"; | |
connection_type = usb; | |
; | |
# JTAG ICE mkII in AVR32 mode | |
programmer | |
id = "jtag2avr32"; | |
desc = "Atmel JTAG ICE mkII im AVR32 mode"; | |
baudrate = 115200; | |
type = "jtagmkii_avr32"; | |
connection_type = usb; | |
; | |
# JTAG ICE mkII in PDI mode | |
programmer | |
id = "jtag2pdi"; | |
desc = "Atmel JTAG ICE mkII PDI mode"; | |
baudrate = 115200; | |
type = "jtagmkii_pdi"; | |
connection_type = usb; | |
; | |
# AVR Dragon in JTAG mode | |
programmer | |
id = "dragon_jtag"; | |
desc = "Atmel AVR Dragon in JTAG mode"; | |
baudrate = 115200; | |
type = "dragon_jtag"; | |
connection_type = usb; | |
; | |
# AVR Dragon in ISP mode | |
programmer | |
id = "dragon_isp"; | |
desc = "Atmel AVR Dragon in ISP mode"; | |
baudrate = 115200; | |
type = "dragon_isp"; | |
connection_type = usb; | |
; | |
# AVR Dragon in PP mode | |
programmer | |
id = "dragon_pp"; | |
desc = "Atmel AVR Dragon in PP mode"; | |
baudrate = 115200; | |
type = "dragon_pp"; | |
connection_type = usb; | |
; | |
# AVR Dragon in HVSP mode | |
programmer | |
id = "dragon_hvsp"; | |
desc = "Atmel AVR Dragon in HVSP mode"; | |
baudrate = 115200; | |
type = "dragon_hvsp"; | |
connection_type = usb; | |
; | |
# AVR Dragon in debugWire mode | |
programmer | |
id = "dragon_dw"; | |
desc = "Atmel AVR Dragon in debugWire mode"; | |
baudrate = 115200; | |
type = "dragon_dw"; | |
connection_type = usb; | |
; | |
# AVR Dragon in PDI mode | |
programmer | |
id = "dragon_pdi"; | |
desc = "Atmel AVR Dragon in PDI mode"; | |
baudrate = 115200; | |
type = "dragon_pdi"; | |
connection_type = usb; | |
; | |
programmer | |
id = "jtag3"; | |
desc = "Atmel AVR JTAGICE3 in JTAG mode"; | |
type = "jtagice3"; | |
connection_type = usb; | |
; | |
programmer | |
id = "jtag3pdi"; | |
desc = "Atmel AVR JTAGICE3 in PDI mode"; | |
type = "jtagice3_pdi"; | |
connection_type = usb; | |
; | |
programmer | |
id = "jtag3dw"; | |
desc = "Atmel AVR JTAGICE3 in debugWIRE mode"; | |
type = "jtagice3_dw"; | |
connection_type = usb; | |
; | |
programmer | |
id = "jtag3isp"; | |
desc = "Atmel AVR JTAGICE3 in ISP mode"; | |
type = "jtagice3_isp"; | |
connection_type = usb; | |
; | |
programmer | |
id = "pavr"; | |
desc = "Jason Kyle's pAVR Serial Programmer"; | |
type = "avr910"; | |
connection_type = serial; | |
; | |
programmer | |
id = "pickit2"; | |
desc = "MicroChip's PICkit2 Programmer"; | |
type = "pickit2"; | |
connection_type = usb; | |
; | |
# Parallel port programmers. | |
programmer | |
id = "bsd"; | |
desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; | |
type = "par"; | |
connection_type = parallel; | |
vcc = 2, 3, 4, 5; | |
reset = 7; | |
sck = 8; | |
mosi = 9; | |
miso = 10; | |
; | |
programmer | |
id = "stk200"; | |
desc = "STK200"; | |
type = "par"; | |
connection_type = parallel; | |
buff = 4, 5; | |
sck = 6; | |
mosi = 7; | |
reset = 9; | |
miso = 10; | |
; | |
# The programming dongle used by the popular Ponyprog | |
# utility. It is almost similar to the STK200 one, | |
# except that there is a LED indicating that the | |
# programming is currently in progress. | |
programmer parent "stk200" | |
id = "pony-stk200"; | |
desc = "Pony Prog STK200"; | |
pgmled = 8; | |
; | |
programmer | |
id = "dt006"; | |
desc = "Dontronics DT006"; | |
type = "par"; | |
connection_type = parallel; | |
reset = 4; | |
sck = 5; | |
mosi = 2; | |
miso = 11; | |
; | |
programmer parent "dt006" | |
id = "bascom"; | |
desc = "Bascom SAMPLE programming cable"; | |
; | |
programmer | |
id = "alf"; | |
desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; | |
type = "par"; | |
connection_type = parallel; | |
vcc = 2, 3, 4, 5; | |
buff = 6; | |
reset = 7; | |
sck = 8; | |
mosi = 9; | |
miso = 10; | |
errled = 1; | |
rdyled = 14; | |
pgmled = 16; | |
vfyled = 17; | |
; | |
programmer | |
id = "sp12"; | |
desc = "Steve Bolt's Programmer"; | |
type = "par"; | |
connection_type = parallel; | |
vcc = 4,5,6,7,8; | |
reset = 3; | |
sck = 2; | |
mosi = 9; | |
miso = 11; | |
; | |
programmer | |
id = "picoweb"; | |
desc = "Picoweb Programming Cable, http://www.picoweb.net/"; | |
type = "par"; | |
connection_type = parallel; | |
reset = 2; | |
sck = 3; | |
mosi = 4; | |
miso = 13; | |
; | |
programmer | |
id = "abcmini"; | |
desc = "ABCmini Board, aka Dick Smith HOTCHIP"; | |
type = "par"; | |
connection_type = parallel; | |
reset = 4; | |
sck = 3; | |
mosi = 2; | |
miso = 10; | |
; | |
programmer | |
id = "futurlec"; | |
desc = "Futurlec.com programming cable."; | |
type = "par"; | |
connection_type = parallel; | |
reset = 3; | |
sck = 2; | |
mosi = 1; | |
miso = 10; | |
; | |
# From the contributor of the "xil" jtag cable: | |
# The "vcc" definition isn't really vcc (the cable gets its power from | |
# the programming circuit) but is necessary to switch one of the | |
# buffer lines (trying to add it to the "buff" lines doesn't work in | |
# avrdude versions before 5.5j). | |
# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK | |
# to SCK (plus vcc/gnd of course) | |
programmer | |
id = "xil"; | |
desc = "Xilinx JTAG cable"; | |
type = "par"; | |
connection_type = parallel; | |
mosi = 2; | |
sck = 3; | |
reset = 4; | |
buff = 5; | |
miso = 13; | |
vcc = 6; | |
; | |
programmer | |
id = "dapa"; | |
desc = "Direct AVR Parallel Access cable"; | |
type = "par"; | |
connection_type = parallel; | |
vcc = 3; | |
reset = 16; | |
sck = 1; | |
mosi = 2; | |
miso = 11; | |
; | |
programmer | |
id = "atisp"; | |
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th"; | |
type = "par"; | |
connection_type = parallel; | |
reset = ~6; | |
sck = ~8; | |
mosi = ~7; | |
miso = ~10; | |
; | |
programmer | |
id = "ere-isp-avr"; | |
desc = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>"; | |
type = "par"; | |
connection_type = parallel; | |
reset = ~4; | |
sck = 3; | |
mosi = 2; | |
miso = 10; | |
; | |
programmer | |
id = "blaster"; | |
desc = "Altera ByteBlaster"; | |
type = "par"; | |
connection_type = parallel; | |
sck = 2; | |
miso = 11; | |
reset = 3; | |
mosi = 8; | |
buff = 14; | |
; | |
# It is almost same as pony-stk200, except vcc on pin 5 to auto | |
# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27) | |
programmer parent "pony-stk200" | |
id = "frank-stk200"; | |
desc = "Frank STK200"; | |
buff = ; # delete buff pin assignment | |
vcc = 5; | |
; | |
# The AT98ISP Cable is a simple parallel dongle for AT89 family. | |
# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 | |
programmer | |
id = "89isp"; | |
desc = "Atmel at89isp cable"; | |
type = "par"; | |
connection_type = parallel; | |
reset = 17; | |
sck = 1; | |
mosi = 2; | |
miso = 10; | |
; | |
#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface | |
# | |
#To enable it set the configuration below to match the GPIO lines connected to the | |
#relevant ISP header pins and uncomment the entry definition. In case you don't | |
#have the required permissions to edit this system wide config file put the | |
#entry in a separate <your name>.conf file and use it with -C+<your name>.conf | |
#on the command line. | |
# | |
#To check if your avrdude build has support for the linuxgpio programmer compiled in, | |
#use -c?type on the command line and look for linuxgpio in the list. If it's not available | |
#you need pass the --enable-linuxgpio=yes option to configure and recompile avrdude. | |
# | |
#programmer | |
# id = "linuxgpio"; | |
# desc = "Use the Linux sysfs interface to bitbang GPIO lines"; | |
# type = "linuxgpio"; | |
# reset = ?; | |
# sck = ?; | |
# mosi = ?; | |
# miso = ?; | |
#; | |
# some ultra cheap programmers use bitbanging on the | |
# serialport. | |
# | |
# PC - DB9 - Pins for RS232: | |
# | |
# GND 5 -- |O | |
# | O| <- 9 RI | |
# DTR 4 <- |O | | |
# | O| <- 8 CTS | |
# TXD 3 <- |O | | |
# | O| -> 7 RTS | |
# RXD 2 -> |O | | |
# | O| <- 6 DSR | |
# DCD 1 -> |O | |
# | |
# Using RXD is currently not supported. | |
# Using RI is not supported under Win32 but is supported under Posix. | |
# serial ponyprog design (dasa2 in uisp) | |
# reset=!txd sck=rts mosi=dtr miso=cts | |
programmer | |
id = "ponyser"; | |
desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; | |
type = "serbb"; | |
connection_type = serial; | |
reset = ~3; | |
sck = 7; | |
mosi = 4; | |
miso = 8; | |
; | |
# Same as above, different name | |
# reset=!txd sck=rts mosi=dtr miso=cts | |
programmer parent "ponyser" | |
id = "siprog"; | |
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>"; | |
; | |
# unknown (dasa in uisp) | |
# reset=rts sck=dtr mosi=txd miso=cts | |
programmer | |
id = "dasa"; | |
desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; | |
type = "serbb"; | |
connection_type = serial; | |
reset = 7; | |
sck = 4; | |
mosi = 3; | |
miso = 8; | |
; | |
# unknown (dasa3 in uisp) | |
# reset=!dtr sck=rts mosi=txd miso=cts | |
programmer | |
id = "dasa3"; | |
desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; | |
type = "serbb"; | |
connection_type = serial; | |
reset = ~4; | |
sck = 7; | |
mosi = 3; | |
miso = 8; | |
; | |
# C2N232i (jumper configuration "auto") | |
# reset=dtr sck=!rts mosi=!txd miso=!cts | |
programmer | |
id = "c2n232i"; | |
desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; | |
type = "serbb"; | |
connection_type = serial; | |
reset = 4; | |
sck = ~7; | |
mosi = ~3; | |
miso = ~8; | |
; | |
# | |
# PART DEFINITIONS | |
# | |
#------------------------------------------------------------ | |
# ATtiny11 | |
#------------------------------------------------------------ | |
# This is an HVSP-only device. | |
part | |
id = "t11"; | |
desc = "ATtiny11"; | |
stk500_devcode = 0x11; | |
signature = 0x1e 0x90 0x04; | |
chip_erase_delay = 20000; | |
timeout = 200; | |
hvsp_controlstack = | |
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, | |
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, | |
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, | |
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
hvspcmdexedelay = 0; | |
synchcycles = 6; | |
latchcycles = 1; | |
togglevtg = 1; | |
poweroffdelay = 25; | |
resetdelayms = 0; | |
resetdelayus = 50; | |
hvleavestabdelay = 100; | |
resetdelay = 25; | |
chiperasepolltimeout = 40; | |
chiperasetime = 0; | |
programfusepolltimeout = 25; | |
programlockpolltimeout = 25; | |
memory "eeprom" | |
size = 64; | |
blocksize = 64; | |
readsize = 256; | |
delay = 5; | |
; | |
memory "flash" | |
size = 1024; | |
blocksize = 128; | |
readsize = 256; | |
delay = 3; | |
; | |
memory "signature" | |
size = 3; | |
; | |
memory "lock" | |
size = 1; | |
; | |
memory "calibration" | |
size = 1; | |
; | |
memory "fuse" | |
size = 1; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATtiny12 | |
#------------------------------------------------------------ | |
part | |
id = "t12"; | |
desc = "ATtiny12"; | |
stk500_devcode = 0x12; | |
avr910_devcode = 0x55; | |
signature = 0x1e 0x90 0x05; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
hvsp_controlstack = | |
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, | |
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, | |
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, | |
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; | |
hventerstabdelay = 100; | |
hvspcmdexedelay = 0; | |
synchcycles = 6; | |
latchcycles = 1; | |
togglevtg = 1; | |
poweroffdelay = 25; | |
resetdelayms = 0; | |
resetdelayus = 50; | |
hvleavestabdelay = 100; | |
resetdelay = 25; | |
chiperasepolltimeout = 40; | |
chiperasetime = 0; | |
programfusepolltimeout = 25; | |
programlockpolltimeout = 25; | |
memory "eeprom" | |
size = 64; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 8; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 1024; | |
min_write_delay = 4500; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 5; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 a1 a0 o o o o o o o o"; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "calibration" | |
size = 1; | |
read = "0 0 1 1 1 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 0 0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x o o o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", | |
"x x x x x x x x i i i i i i i i"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATtiny13 | |
#------------------------------------------------------------ | |
part | |
id = "t13"; | |
desc = "ATtiny13"; | |
has_debugwire = yes; | |
flash_instr = 0xB4, 0x0E, 0x1E; | |
eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, | |
0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, | |
0x99, 0xE1, 0xBB, 0xAC; | |
stk500_devcode = 0x14; | |
signature = 0x1e 0x90 0x07; | |
chip_erase_delay = 4000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 1; | |
hvsp_controlstack = | |
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, | |
0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, | |
0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, | |
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
hvspcmdexedelay = 0; | |
synchcycles = 6; | |
latchcycles = 1; | |
togglevtg = 1; | |
poweroffdelay = 25; | |
resetdelayms = 0; | |
resetdelayus = 90; | |
hvleavestabdelay = 100; | |
resetdelay = 25; | |
chiperasepolltimeout = 40; | |
chiperasetime = 0; | |
programfusepolltimeout = 25; | |
programlockpolltimeout = 25; | |
ocdrev = 0; | |
memory "eeprom" | |
size = 64; | |
page_size = 4; | |
min_write_delay = 4000; | |
max_write_delay = 4000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
loadpage_lo = " 1 1 0 0 0 0 0 1", | |
" 0 0 0 0 0 0 0 0", | |
" 0 0 0 0 0 0 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 1 1 0 0 0 0 1 0", | |
" 0 0 x x x x x x", | |
" x x a5 a4 a3 a2 0 0", | |
" x x x x x x x x"; | |
mode = 0x41; | |
delay = 5; | |
blocksize = 4; | |
readsize = 256; | |
; | |
memory "flash" | |
paged = yes; | |
size = 1024; | |
page_size = 32; | |
num_pages = 32; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" 0 0 0 0 0 0 0 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" 0 0 0 0 0 0 0 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
loadpage_lo = " 0 1 0 0 0 0 0 0", | |
" 0 0 0 x x x x x", | |
" x x x x a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_hi = " 0 1 0 0 1 0 0 0", | |
" 0 0 0 x x x x x", | |
" x x x x a3 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 0 1 0 0 1 1 0 0", | |
" 0 0 0 0 0 0 0 a8", | |
" a7 a6 a5 a4 x x x x", | |
" x x x x x x x x"; | |
mode = 0x41; | |
delay = 6; | |
blocksize = 32; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", | |
"x x x x x x x x 1 1 i i i i i i"; | |
; | |
memory "calibration" | |
size = 2; | |
read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", | |
"0 0 0 0 0 0 0 a0 o o o o o o o o"; | |
; | |
memory "lfuse" | |
size = 1; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
; | |
memory "hfuse" | |
size = 1; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATtiny15 | |
#------------------------------------------------------------ | |
part | |
id = "t15"; | |
desc = "ATtiny15"; | |
stk500_devcode = 0x13; | |
avr910_devcode = 0x56; | |
signature = 0x1e 0x90 0x06; | |
chip_erase_delay = 8200; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
hvsp_controlstack = | |
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, | |
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, | |
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, | |
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; | |
hventerstabdelay = 100; | |
hvspcmdexedelay = 5; | |
synchcycles = 6; | |
latchcycles = 16; | |
togglevtg = 1; | |
poweroffdelay = 25; | |
resetdelayms = 0; | |
resetdelayus = 50; | |
hvleavestabdelay = 100; | |
resetdelay = 25; | |
chiperasepolltimeout = 40; | |
chiperasetime = 0; | |
programfusepolltimeout = 25; | |
programlockpolltimeout = 25; | |
memory "eeprom" | |
size = 64; | |
min_write_delay = 8200; | |
max_write_delay = 8200; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 10; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 1024; | |
min_write_delay = 4100; | |
max_write_delay = 4100; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 5; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 a1 a0 o o o o o o o o"; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "calibration" | |
size = 1; | |
read = "0 0 1 1 1 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 0 0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x o o o o x x o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", | |
"x x x x x x x x i i i i 1 1 i i"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s1200 | |
#------------------------------------------------------------ | |
part | |
id = "1200"; | |
desc = "AT90S1200"; | |
is_at90s1200 = yes; | |
stk500_devcode = 0x33; | |
avr910_devcode = 0x13; | |
signature = 0x1e 0x90 0x01; | |
pagel = 0xd7; | |
bs2 = 0xa0; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 1; | |
bytedelay = 0; | |
pollindex = 0; | |
pollvalue = 0xFF; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 64; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 x x x x x x x x", | |
"x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 20; | |
blocksize = 32; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 1024; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x02; | |
delay = 15; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s4414 | |
#------------------------------------------------------------ | |
part | |
id = "4414"; | |
desc = "AT90S4414"; | |
stk500_devcode = 0x50; | |
avr910_devcode = 0x28; | |
signature = 0x1e 0x92 0x01; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 256; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x80; | |
readback_p2 = 0x7f; | |
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 4096; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x7f; | |
readback_p2 = 0x7f; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
; | |
memory "lock" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s2313 | |
#------------------------------------------------------------ | |
part | |
id = "2313"; | |
desc = "AT90S2313"; | |
stk500_devcode = 0x40; | |
avr910_devcode = 0x20; | |
signature = 0x1e 0x91 0x01; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 128; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x80; | |
readback_p2 = 0x7f; | |
read = "1 0 1 0 0 0 0 0 x x x x x x x x", | |
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 x x x x x x x x", | |
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 2048; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x7f; | |
readback_p2 = 0x7f; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
; | |
memory "lock" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s2333 | |
#------------------------------------------------------------ | |
part | |
id = "2333"; | |
##### WARNING: No XML file for device 'AT90S2333'! ##### | |
desc = "AT90S2333"; | |
stk500_devcode = 0x42; | |
avr910_devcode = 0x34; | |
signature = 0x1e 0x91 0x05; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 128; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 x x x x x x x x", | |
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 x x x x x x x x", | |
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 2048; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
pwroff_after_write = yes; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s2343 (also AT90s2323 and ATtiny22) | |
#------------------------------------------------------------ | |
part | |
id = "2343"; | |
desc = "AT90S2343"; | |
stk500_devcode = 0x43; | |
avr910_devcode = 0x4c; | |
signature = 0x1e 0x91 0x03; | |
chip_erase_delay = 18000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
hvsp_controlstack = | |
0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, | |
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, | |
0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, | |
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; | |
hventerstabdelay = 100; | |
hvspcmdexedelay = 0; | |
synchcycles = 6; | |
latchcycles = 1; | |
togglevtg = 0; | |
poweroffdelay = 25; | |
resetdelayms = 0; | |
resetdelayus = 50; | |
hvleavestabdelay = 100; | |
resetdelay = 25; | |
chiperasepolltimeout = 40; | |
chiperasetime = 0; | |
programfusepolltimeout = 25; | |
programlockpolltimeout = 25; | |
memory "eeprom" | |
size = 128; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 2048; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 128; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x o o o x x x x o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x o o o x x x x o"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s4433 | |
#------------------------------------------------------------ | |
part | |
id = "4433"; | |
desc = "AT90S4433"; | |
stk500_devcode = 0x51; | |
avr910_devcode = 0x30; | |
signature = 0x1e 0x92 0x03; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 256; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0 x x x x x x x x", | |
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0 x x x x x x x x", | |
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 4096; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
pwroff_after_write = yes; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s4434 | |
#------------------------------------------------------------ | |
part | |
id = "4434"; | |
##### WARNING: No XML file for device 'AT90S4434'! ##### | |
desc = "AT90S4434"; | |
stk500_devcode = 0x52; | |
avr910_devcode = 0x6c; | |
signature = 0x1e 0x92 0x02; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
memory "eeprom" | |
size = 256; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0 x x x x x x x x", | |
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0 x x x x x x x x", | |
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
; | |
memory "flash" | |
size = 4096; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
memory "lock" | |
size = 1; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s8515 | |
#------------------------------------------------------------ | |
part | |
id = "8515"; | |
desc = "AT90S8515"; | |
stk500_devcode = 0x60; | |
avr910_devcode = 0x38; | |
signature = 0x1e 0x93 0x01; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
resetdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 512; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x80; | |
readback_p2 = 0x7f; | |
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 8192; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x7f; | |
readback_p2 = 0x7f; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
; | |
memory "lock" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90s8535 | |
#------------------------------------------------------------ | |
part | |
id = "8535"; | |
desc = "AT90S8535"; | |
stk500_devcode = 0x61; | |
avr910_devcode = 0x68; | |
signature = 0x1e 0x93 0x03; | |
chip_erase_delay = 20000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 1; | |
memory "eeprom" | |
size = 512; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0x00; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", | |
"a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "flash" | |
size = 8192; | |
min_write_delay = 9000; | |
max_write_delay = 20000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
write_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
memory "fuse" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x x x o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x o o x x x x x x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATmega103 | |
#------------------------------------------------------------ | |
part | |
id = "m103"; | |
desc = "ATmega103"; | |
stk500_devcode = 0xB1; | |
avr910_devcode = 0x41; | |
signature = 0x1e 0x97 0x01; | |
chip_erase_delay = 112000; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, | |
0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, | |
0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, | |
0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 0; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 15; | |
chiperasepolltimeout = 0; | |
programfusepulsewidth = 2; | |
programfusepolltimeout = 0; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 10; | |
memory "eeprom" | |
size = 4096; | |
min_write_delay = 4000; | |
max_write_delay = 9000; | |
readback_p1 = 0x80; | |
readback_p2 = 0x7f; | |
read = " 1 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
paged = yes; | |
size = 131072; | |
page_size = 256; | |
num_pages = 512; | |
min_write_delay = 22000; | |
max_write_delay = 56000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
loadpage_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 0 1 0 0 1 1 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 x x x x x x x", | |
" x x x x x x x x"; | |
mode = 0x11; | |
delay = 70; | |
blocksize = 256; | |
readsize = 256; | |
; | |
memory "fuse" | |
size = 1; | |
read = "0 1 0 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x o x o 1 o o"; | |
write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 x x x x x x x x", | |
"x x x x x x x x x x x x x o o x"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", | |
"x x x x x x x x x x x x x x x x"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATmega64 | |
#------------------------------------------------------------ | |
part | |
id = "m64"; | |
desc = "ATmega64"; | |
has_jtag = yes; | |
stk500_devcode = 0xA0; | |
avr910_devcode = 0x45; | |
signature = 0x1e 0x96 0x02; | |
chip_erase_delay = 9000; | |
pagel = 0xD7; | |
bs2 = 0xA0; | |
reset = dedicated; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 6; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 0; | |
chiperasepolltimeout = 10; | |
programfusepulsewidth = 0; | |
programfusepolltimeout = 5; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 5; | |
idr = 0x22; | |
spmcr = 0x68; | |
allowfullpagebitstream = yes; | |
ocdrev = 2; | |
memory "eeprom" | |
paged = no; /* leave this "no" */ | |
page_size = 8; /* for parallel programming */ | |
size = 2048; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 20; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
paged = yes; | |
size = 65536; | |
page_size = 256; | |
num_pages = 256; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
" x a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
" x a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
loadpage_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 0 1 0 0 1 1 0 0", | |
" x a14 a13 a12 a11 a10 a9 a8", | |
" a7 x x x x x x x", | |
" x x x x x x x x"; | |
mode = 0x21; | |
delay = 6; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "lfuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "hfuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "efuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", | |
"x x x x x x x x x x x x x x i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", | |
"x x x x x x x x 1 1 i i i i i i"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "calibration" | |
size = 4; | |
read = "0 0 1 1 1 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 a1 a0 o o o o o o o o"; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
; | |
#------------------------------------------------------------ | |
# ATmega128 | |
#------------------------------------------------------------ | |
part | |
id = "m128"; | |
desc = "ATmega128"; | |
has_jtag = yes; | |
stk500_devcode = 0xB2; | |
avr910_devcode = 0x43; | |
signature = 0x1e 0x97 0x02; | |
chip_erase_delay = 9000; | |
pagel = 0xD7; | |
bs2 = 0xA0; | |
reset = dedicated; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 0; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 6; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 0; | |
chiperasepolltimeout = 10; | |
programfusepulsewidth = 0; | |
programfusepolltimeout = 5; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 5; | |
idr = 0x22; | |
spmcr = 0x68; | |
rampz = 0x3b; | |
allowfullpagebitstream = yes; | |
ocdrev = 1; | |
memory "eeprom" | |
paged = no; /* leave this "no" */ | |
page_size = 8; /* for parallel programming */ | |
size = 4096; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0", | |
" x x x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
mode = 0x04; | |
delay = 12; | |
blocksize = 64; | |
readsize = 256; | |
; | |
memory "flash" | |
paged = yes; | |
size = 131072; | |
page_size = 256; | |
num_pages = 512; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
loadpage_lo = " 0 1 0 0 0 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_hi = " 0 1 0 0 1 0 0 0", | |
" x x x x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 0 1 0 0 1 1 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 x x x x x x x", | |
" x x x x x x x x"; | |
mode = 0x21; | |
delay = 6; | |
blocksize = 128; | |
readsize = 256; | |
; | |
memory "lfuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "hfuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "efuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", | |
"x x x x x x x x x x x x x x i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "lock" | |
size = 1; | |
read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x x x o o o o o o"; | |
write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", | |
"x x x x x x x x 1 1 i i i i i i"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "calibration" | |
size = 4; | |
read = "0 0 1 1 1 0 0 0 x x x x x x x x", | |
"0 0 0 0 0 0 a1 a0 o o o o o o o o"; | |
; | |
memory "signature" | |
size = 3; | |
read = "0 0 1 1 0 0 0 0 x x x x x x x x", | |
"x x x x x x a1 a0 o o o o o o o o"; | |
; | |
; | |
#------------------------------------------------------------ | |
# AT90CAN128 | |
#------------------------------------------------------------ | |
part | |
id = "c128"; | |
desc = "AT90CAN128"; | |
has_jtag = yes; | |
stk500_devcode = 0xB3; | |
# avr910_devcode = 0x43; | |
signature = 0x1e 0x97 0x81; | |
chip_erase_delay = 9000; | |
pagel = 0xD7; | |
bs2 = 0xA0; | |
reset = dedicated; | |
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", | |
"x x x x x x x x x x x x x x x x"; | |
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", | |
"x x x x x x x x x x x x x x x x"; | |
timeout = 200; | |
stabdelay = 100; | |
cmdexedelay = 25; | |
synchloops = 32; | |
bytedelay = 0; | |
pollindex = 3; | |
pollvalue = 0x53; | |
predelay = 1; | |
postdelay = 1; | |
pollmethod = 1; | |
pp_controlstack = | |
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, | |
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, | |
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, | |
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; | |
hventerstabdelay = 100; | |
progmodedelay = 0; | |
latchcycles = 6; | |
togglevtg = 0; | |
poweroffdelay = 0; | |
resetdelayms = 0; | |
resetdelayus = 0; | |
hvleavestabdelay = 15; | |
chiperasepulsewidth = 0; | |
chiperasepolltimeout = 10; | |
programfusepulsewidth = 0; | |
programfusepolltimeout = 5; | |
programlockpulsewidth = 0; | |
programlockpolltimeout = 5; | |
idr = 0x31; | |
spmcr = 0x57; | |
rampz = 0x3b; | |
eecr = 0x3f; | |
allowfullpagebitstream = no; | |
ocdrev = 3; | |
memory "eeprom" | |
paged = no; /* leave this "no" */ | |
page_size = 8; /* for parallel programming */ | |
size = 4096; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read = " 1 0 1 0 0 0 0 0", | |
" 0 0 0 x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
write = " 1 1 0 0 0 0 0 0", | |
" 0 0 0 x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_lo = " 1 1 0 0 0 0 0 1", | |
" 0 0 0 0 0 0 0 0", | |
" 0 0 0 0 0 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 1 1 0 0 0 0 1 0", | |
" 0 0 x x a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 0 0 0", | |
" x x x x x x x x"; | |
mode = 0x41; | |
delay = 20; | |
blocksize = 8; | |
readsize = 256; | |
; | |
memory "flash" | |
paged = yes; | |
size = 131072; | |
page_size = 256; | |
num_pages = 512; | |
min_write_delay = 4500; | |
max_write_delay = 4500; | |
readback_p1 = 0xff; | |
readback_p2 = 0xff; | |
read_lo = " 0 0 1 0 0 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
read_hi = " 0 0 1 0 1 0 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 a6 a5 a4 a3 a2 a1 a0", | |
" o o o o o o o o"; | |
loadpage_lo = " 0 1 0 0 0 0 0 0", | |
" 0 0 0 x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
loadpage_hi = " 0 1 0 0 1 0 0 0", | |
" 0 0 0 x x x x x", | |
" x a6 a5 a4 a3 a2 a1 a0", | |
" i i i i i i i i"; | |
writepage = " 0 1 0 0 1 1 0 0", | |
"a15 a14 a13 a12 a11 a10 a9 a8", | |
" a7 x x x x x x x", | |
" x x x x x x x x"; | |
mode = 0x41; | |
delay = 6; | |
blocksize = 256; | |
readsize = 256; | |
; | |
memory "lfuse" | |
size = 1; | |
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", | |
"x x x x x x x x i i i i i i i i"; | |
read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", | |
"x x x x x x x x o o o o o o o o"; | |
min_write_delay = 9000; | |
max_write_delay = 9000; | |
; | |
memory "hfuse" |