Created
July 28, 2024 03:15
-
-
Save jzjsuper/449b97c4e7f8e1eafe4b3817e5ae6678 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Format: Log Type - Time(microsec) - Message - Optional Info | |
| Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
| S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00163 | |
| S - IMAGE_VARIANT_STRING=HAACANAZA | |
| S - OEM_IMAGE_VERSION_STRING=CRM | |
| S - Boot Config, 0x000002e5 | |
| B - 201 - PBL, Start | |
| B - 2736 - bootable_media_detect_entry, Start | |
| B - 3284 - bootable_media_detect_success, Start | |
| B - 3288 - elf_loader_entry, Start | |
| B - 7465 - auth_hash_seg_entry, Start | |
| B - 7712 - auth_hash_seg_exit, Start | |
| B - 69558 - elf_segs_hash_verify_entry, Start | |
| B - 132412 - PBL, End | |
| B - 147162 - SBL1, Start | |
| B - 200385 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4 | |
| B - 207003 - pm_device_init, Start | |
| B - 331260 - PM_SET_VAL:Skip | |
| D - 123738 - pm_device_init, Delta | |
| B - 333670 - pm_driver_init, Start | |
| D - 5368 - pm_driver_init, Delta | |
| B - 340044 - clock_init, Start | |
| D - 2135 - clock_init, Delta | |
| B - 344009 - boot_flash_init, Start | |
| D - 17995 - boot_flash_init, Delta | |
| B - 365756 - boot_config_data_table_init, Start | |
| D - 4209 - boot_config_data_table_init, Delta - (575 Bytes) | |
| B - 373198 - Boot Setting : 0x00000618 | |
| B - 377224 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:13 | |
| B - 384147 - sbl1_ddr_set_params, Start | |
| B - 387960 - CPR configuration: 0x30c | |
| B - 391437 - cpr_init, Start | |
| B - 394212 - Rail:0 Mode: 5 Voltage: 792000 | |
| B - 399458 - CL CPR settled at 744000mV | |
| B - 402203 - Rail:1 Mode: 5 Voltage: 880000 | |
| B - 406473 - Rail:1 Mode: 7 Voltage: 888000 | |
| D - 16470 - cpr_init, Delta | |
| B - 413275 - Pre_DDR_clock_init, Start | |
| B - 417301 - Pre_DDR_clock_init, End | |
| B - 420686 - DDR Type : PCDDR3 | |
| B - 426420 - do ddr sanity test, Start | |
| D - 1067 - do ddr sanity test, Delta | |
| B - 431178 - DDR: Start of HAL DDR Boot Training | |
| B - 435814 - DDR: End of HAL DDR Boot Training | |
| B - 441579 - DDR: Checksum to be stored on flash is 1712429842 | |
| B - 451888 - Image Load, Start | |
| D - 216519 - QSEE Image Loaded, Delta - (1374928 Bytes) | |
| B - 668499 - Image Load, Start | |
| D - 61 - SEC Image Loaded, Delta - (0 Bytes) | |
| B - 676185 - Image Load, Start | |
| D - 12017 - DEVCFG Image Loaded, Delta - (26148 Bytes) | |
| B - 688293 - Image Load, Start | |
| D - 23058 - RPM Image Loaded, Delta - (86660 Bytes) | |
| B - 711443 - Image Load, Start | |
| D - 91774 - APPSBL Image Loaded, Delta - (585496 Bytes) | |
| B - 803370 - QSEE Execution, Start | |
| D - 61 - QSEE Execution, Delta | |
| B - 809165 - USB D+ check, Start | |
| D - 0 - USB D+ check, Delta | |
| B - 815539 - SBL1, End | |
| D - 670695 - SBL1, Delta | |
| S - Flash Throughput, 6897 KB/s (2074479 Bytes, 300753 us) | |
| S - DDR Frequency, 466 MHz | |
| S - Core 0 Frequency, 800 MHz | |
| U-Boot 2016.01-v0.20.256.210611_11.3csu2 (Jun 14 2021 - 23:17:51 +0800) | |
| DRAM: smem ram ptable found: ver: 1 len: 4 | |
| 2 GiB | |
| board_env_offset=1000000, board_env_size= 40000 | |
| board_devinfo_offset=1200000, board_devinfo_size=40000 | |
| board_senv_offset=1100000, board_senv_size=100000 | |
| NAND: Could not find nand_gpio in dts, using defaults | |
| ONFI device found | |
| ID = 1681a301 | |
| Vendor = 1 | |
| Device = a3 | |
| qpic_nand: changing oobsize to 128 from 256 bytes | |
| SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff | |
| ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) | |
| 1024 MiB | |
| MMC: <NULL>: 0 | |
| readenv offset=ox1000000 | |
| [devinfo_relocate] devinfo_relocate[152] malloced DEVINFO at 4a683600 | |
| [devinfo_relocate_spec] ret: 0 , total: 262144 , CONFIG_DEVINFO_SIZE: 262144 | |
| In: serial@78B3000 | |
| Out: serial@78B3000 | |
| Err: serial@78B3000 | |
| machid: 801000d | |
| Card did not respond to voltage select! | |
| eth3 MAC Address from ART is not valid | |
| eth4 MAC Address from ART is not valid | |
| eth5 MAC Address from ART is not valid | |
| ################################# | |
| ######### auto_recovery ######### | |
| ################################# | |
| === enabled:1, === boot_part:1, === maxpartialboots:3 | |
| boot_count_buffer_size = 4096, total number = 256 | |
| i=41, offset = 0x1129000, last_offset = 0x1128000 | |
| Updating boot_count... | |
| boot->Count:3 ,boot->CheckSum:20110814, offset:0x1129000 | |
| #### ~~~~~~~~~~~~~ #### | |
| #### auto_recovery check #### | |
| Hit any key to stop autoboot: 2 1 0 | |
| Normal boot | |
| NAND read: device 0 offset 0x1240000, size 0x800000 | |
| 8388608 bytes read: OK | |
| ## Loading kernel from FIT Image at 44000000 ... | |
| Using 'config@1' configuration | |
| Trying 'kernel-1' kernel subimage | |
| Description: ARM64 OpenWrt Linux-6.6.41 | |
| Type: Kernel Image | |
| Compression: gzip compressed | |
| Data Start: 0x440000e8 | |
| Data Size: 5153630 Bytes = 4.9 MiB | |
| Architecture: AArch64 | |
| OS: Linux | |
| Load Address: 0x41000000 | |
| Entry Point: 0x41000000 | |
| Hash algo: crc32 | |
| Hash value: c3f11eaf | |
| Hash algo: sha1 | |
| Hash value: 408e13d99b82f9f8670cec6bbf699998fa2a96a8 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| ## Loading fdt from FIT Image at 44000000 ... | |
| Using 'config@1' configuration | |
| Trying 'fdt-1' fdt subimage | |
| Description: ARM64 OpenWrt linksys_mx4300 device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x444ea588 | |
| Data Size: 45865 Bytes = 44.8 KiB | |
| Architecture: AArch64 | |
| Hash algo: crc32 | |
| Hash value: 9b87a95a | |
| Hash algo: sha1 | |
| Hash value: 4e1d022a21d63d8d0e278a8b1059203fbea86fbb | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| Booting using the fdt blob at 0x444ea588 | |
| Uncompressing Kernel Image ... OK | |
| Loading Device Tree to 4a3f1000, end 4a3ff328 ... OK | |
| Using machid 0x801000d from environment | |
| Starting kernel ... | |
| Jumping to AARCH64 kernel via monitor | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 6.6.41 (runner@fv-az1055-565) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r0-de4be02) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sat Jul 27 21:57:30 2024 | |
| [ 0.000000] Machine model: Linksys MX4300 | |
| [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000 | |
| [ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000 | |
| [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000 | |
| [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000 | |
| [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000 | |
| [ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000 | |
| [ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000 | |
| [ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000 | |
| [ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] | |
| [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff] | |
| [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff] | |
| [ 0.000000] node 0: [mem 0x0000000051100000-0x00000000bfffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s35240 r8192 d30296 u73728 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=22,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro root=/dev/ubiblock0_0 | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000bd600000-0x00000000bd800000] (2MB) | |
| [ 0.000000] Memory: 1913328K/2097152K available (8128K kernel code, 892K rwdata, 2476K rodata, 1472K init, 276K bss, 183824K reserved, 0K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
| [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
| [ 0.000101] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
| [ 0.000114] pid_max: default: 32768 minimum: 301 | |
| [ 0.005118] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.005135] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.009376] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.009602] rcu: Hierarchical SRCU implementation. | |
| [ 0.009607] rcu: Max phase no-delay instances is 1000. | |
| [ 0.010556] smp: Bringing up secondary CPUs ... | |
| [ 0.011226] Detected VIPT I-cache on CPU1 | |
| [ 0.011328] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.011997] Detected VIPT I-cache on CPU2 | |
| [ 0.012067] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.012721] Detected VIPT I-cache on CPU3 | |
| [ 0.012788] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.012858] smp: Brought up 1 node, 4 CPUs | |
| [ 0.012866] SMP: Total of 4 processors activated. | |
| [ 0.012872] CPU features: detected: 32-bit EL0 Support | |
| [ 0.012876] CPU features: detected: CRC32 instructions | |
| [ 0.012947] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching | |
| [ 0.012954] CPU: All CPU(s) started at EL1 | |
| [ 0.012956] alternatives: applying system-wide alternatives | |
| [ 0.023463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.023489] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.025220] pinctrl core: initialized pinctrl subsystem | |
| [ 0.026938] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.027560] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.027615] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.027667] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.028053] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.028110] cpuidle: using governor menu | |
| [ 0.028339] ASID allocator initialised with 65536 entries | |
| [ 0.054902] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 | |
| [ 0.056827] Modules: 29408 pages in range for non-PLT usage | |
| [ 0.056833] Modules: 520928 pages in range for PLT usage | |
| [ 0.061703] SCSI subsystem initialized | |
| [ 0.061894] usbcore: registered new interface driver usbfs | |
| [ 0.061928] usbcore: registered new interface driver hub | |
| [ 0.061991] usbcore: registered new device driver usb | |
| [ 0.062401] qcom_scm: convention: smc arm 64 | |
| [ 0.064116] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.067875] NET: Registered PF_INET protocol family | |
| [ 0.068063] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.071573] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.071605] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.071621] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.071781] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) | |
| [ 0.072322] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.072441] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.072508] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.072999] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.073056] PCI: CLS 0 bytes, default 64 | |
| [ 0.074768] workingset: timestamp_bits=46 max_order=19 bucket_order=0 | |
| [ 0.075358] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.075365] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.081501] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator | |
| [ 0.081668] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator | |
| [ 0.082871] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator | |
| [ 0.083027] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator | |
| [ 0.083067] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator | |
| [ 0.083255] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy | |
| [ 0.091545] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
| [ 0.092682] msm_serial 78b1000.serial: msm_serial: detected port #1 | |
| [ 0.092721] msm_serial 78b1000.serial: uartclk = 19200000 | |
| [ 0.093045] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM | |
| [ 0.093499] msm_serial 78b3000.serial: msm_serial: detected port #0 | |
| [ 0.093529] msm_serial 78b3000.serial: uartclk = 3686400 | |
| [ 0.093846] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM | |
| [ 0.093878] msm_serial: console setup on port #0 | |
| [ 0.093919] printk: console [ttyMSM0] enabled | |
| [ 0.880306] msm_serial: driver initialized | |
| [ 0.889561] loop: module loaded | |
| [ 0.891013] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa3 | |
| [ 0.891520] nand: AMD/Spansion S34MS08G2 | |
| [ 0.898198] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256 | |
| [ 0.902429] 31 fixed-partitions partitions found on MTD device qcom_nand.0 | |
| [ 0.909911] Creating 31 MTD partitions on "qcom_nand.0": | |
| [ 0.916459] 0x000000000000-0x000000100000 : "0:sbl1" | |
| [ 0.923028] 0x000000100000-0x000000200000 : "0:mibib" | |
| [ 0.927868] 0x000000200000-0x000000280000 : "0:bootconfig" | |
| [ 0.932517] 0x000000280000-0x000000300000 : "0:bootconfig1" | |
| [ 0.937943] 0x000000300000-0x000000600000 : "0:qsee" | |
| [ 0.944627] 0x000000600000-0x000000900000 : "0:qsee_1" | |
| [ 0.949762] 0x000000900000-0x000000980000 : "0:devcfg" | |
| [ 0.953518] 0x000000980000-0x000000a00000 : "0:devcfg_1" | |
| [ 0.958699] 0x000000a00000-0x000000a80000 : "0:apdp" | |
| [ 0.964204] 0x000000a80000-0x000000b00000 : "0:apdp_1" | |
| [ 0.969091] 0x000000b00000-0x000000b80000 : "0:rpm" | |
| [ 0.974037] 0x000000b80000-0x000000c00000 : "0:rpm_1" | |
| [ 0.978824] 0x000000c00000-0x000000c80000 : "0:cdt" | |
| [ 0.983980] 0x000000c80000-0x000000d00000 : "0:cdt_1" | |
| [ 0.988825] 0x000000d00000-0x000000d80000 : "0:appsblenv" | |
| [ 0.993936] 0x000000d80000-0x000000e80000 : "0:appsbl" | |
| [ 0.999562] 0x000000e80000-0x000000f80000 : "0:appsbl_1" | |
| [ 1.004610] 0x000000f80000-0x000001000000 : "0:art" | |
| [ 1.009786] 0x000001000000-0x000001100000 : "u_env" | |
| [ 1.014643] 0x000001100000-0x000001200000 : "s_env" | |
| [ 1.019508] 0x000001200000-0x000001240000 : "devinfo" | |
| [ 1.024008] 0x000001240000-0x00000c180000 : "kernel" | |
| [ 1.112837] 0x000001a40000-0x00000c180000 : "rootfs" | |
| [ 1.193125] mtd: setting mtd22 (rootfs) as root device | |
| [ 1.193742] mtdsplit: no squashfs found in "rootfs" | |
| [ 1.197190] 0x00000c180000-0x0000170c0000 : "alt_kernel" | |
| [ 1.286012] 0x00000c980000-0x0000170c0000 : "alt_rootfs" | |
| [ 1.366244] 0x0000170c0000-0x0000174c0000 : "sysdiag" | |
| [ 1.368693] 0x0000174c0000-0x000017540000 : "0:ethphyfw" | |
| [ 1.371057] 0x000017540000-0x00001ef00000 : "syscfg" | |
| [ 1.434305] 0x00001ef00000-0x00001f300000 : "secured_store" | |
| [ 1.436763] 0x00001f300000-0x000020c00000 : "0:wififw" | |
| [ 1.451200] 0x000020c00000-0x000036d80000 : "app2_data" | |
| [ 1.630915] spmi spmi-0: PMIC arbiter version v2 (0x20010000) | |
| [ 1.649569] i2c_dev: i2c /dev entries driver | |
| [ 1.656912] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.656956] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.661990] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.668299] remoteproc remoteproc0: releasing cd00000.q6v5_wcss | |
| [ 1.674583] NET: Registered PF_INET6 protocol family | |
| [ 1.678714] Segment Routing with IPv6 | |
| [ 1.683022] In-situ OAM (IOAM) with IPv6 | |
| [ 1.686665] NET: Registered PF_PACKET protocol family | |
| [ 1.690826] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.723595] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 | |
| [ 1.723913] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 | |
| [ 1.729781] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 | |
| [ 1.736347] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 | |
| [ 1.743983] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable | |
| [ 1.751518] cpr3_mem_acc_init: apc: not using memory accelerator regulator | |
| [ 1.760653] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV | |
| [ 1.767598] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 808000 uV | |
| [ 1.777578] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 864000 uV | |
| [ 1.787379] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 952000 uV | |
| [ 1.797235] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 745, quot_offset[ 7]= 0 | |
| [ 1.806993] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 952, quot_offset[ 7]= 205 | |
| [ 1.817843] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1052, quot_offset[ 7]= 100 | |
| [ 1.828779] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1221, quot_offset[ 7]= 165 | |
| [ 1.839924] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop | |
| [ 1.842546] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz | |
| [ 1.859573] remoteproc remoteproc0: cd00000.q6v5_wcss is available | |
| [ 1.868429] ubi0: attaching mtd22 | |
| [ 1.874190] ubi0 warning: ubi_attach_mtd_dev: EC and VID headers are in the same minimal I/O unit, switch to read-only mode | |
| [ 2.324118] random: crng init done | |
| [ 2.334971] ubi0: scanning is finished | |
| [ 2.342136] ubi0 warning: autoresize: skip auto-resize because of R/O mode | |
| [ 2.342609] ubi0: attached mtd22 (name "rootfs", size 167 MiB) | |
| [ 2.347937] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes | |
| [ 2.353724] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | |
| [ 2.360595] ubi0: VID header offset: 2048 (aligned 0), data offset: 4096 | |
| [ 2.367444] ubi0: good PEBs: 669, bad PEBs: 0, corrupted PEBs: 0 | |
| [ 2.374213] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 | |
| [ 2.380200] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1722117450 | |
| [ 2.387240] ubi0: available PEBs: 551, total reserved PEBs: 118, PEBs reserved for bad PEB handling: 80 | |
| [ 2.396538] ubi0: background thread "ubi_bgt0d" started, PID 669 | |
| [ 2.397064] block ubiblock0_0: created from ubi0:0(ro�[ 2.418000] UBIFS (ubi0:0): read-only UBI device | |
| [ 2.418041] UBIFS error (ubi0:0 pid 1): ubifs_mount: cannot mount read-write - read-only media | |
| [ 2.424585] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. | |
| [ 2.430597] Freeing unused kernel memory: 1472K | |
| [ 2.437422] Run /sbin/init as init process | |
| [ 2.637129] init: Console is alive | |
| [ 2.637265] init: - watchdog - | |
| [ 3.384490] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 3.418220] gpio_button_hotplug: loading out-of-tree module taints kernel. | |
| [ 3.461737] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist | |
| [ 3.758185] adpt_hppe_uniphy_mode_set[1398]:INFO:ssdk doesn't support mode:0 in uniphy:0 on platform! | |
| [ 3.758344] regi_init[2525]:INFO:Initializing HPPE Done!! | |
| [ 3.766499] regi_init[2574]:INFO:qca-ssdk module init succeeded! | |
| [ 3.774349] EDMA ver 1 hw init | |
| [ 3.778073] EDMA HW Reset completed succesfully | |
| [ 3.780754] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) | |
| [ 3.785154] RxDesc:1 (15-15) RxFill:1 (7-7) | |
| [ 3.790733] dp2: ppe offload disabled: 0 for macid 2 | |
| [ 3.794536] dp2: Switch attached to macid 2 status: 0 | |
| [ 3.964892] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) | |
| [ 3.965809] dp3: ppe offload disabled: 0 for macid 3 | |
| [ 3.973783] dp3: Switch attached to macid 3 status: 0 | |
| [ 4.054471] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) | |
| [ 4.055408] GMAC4(ffffff8002b37900) Invalid MAC@ - using 52:4c:a9:41:2c:52 | |
| [ 4.063365] dp4: ppe offload disabled: 0 for macid 4 | |
| [ 4.070244] dp4: Switch attached to macid 4 status: 0 | |
| [ 4.154473] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) | |
| [ 4.155415] GMAC5(ffffff8002b35900) Invalid MAC@ - using ea:49:26:bd:8a:2f | |
| [ 4.163365] dp5: ppe offload disabled: 0 for macid 5 | |
| [ 4.170252] dp5: Switch attached to macid 5 status: 0 | |
| [ 4.254470] Qualcomm QCA8075 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL) | |
| [ 4.255349] ********************************************************** | |
| [ 4.263360] * NSS Data Plane driver | |
| [ 4.269889] ********************************************************** | |
| [ 4.286705] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 4.286758] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | |
| [ 4.291223] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 | |
| [ 4.298721] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000 | |
| [ 4.308160] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 4.313925] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | |
| [ 4.319493] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
| [ 4.327495] hub 1-0:1.0: USB hub found | |
| [ 4.333648] hub 1-0:1.0: 1 port detected | |
| [ 4.337965] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 4.341909] hub 2-0:1.0: USB hub found | |
| [ 4.349671] hub 2-0:1.0: 1 port detected | |
| [ 4.356303] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 4.362448] init: - preinit - | |
| /bin/board_detect: line 10: Unsupported: not found | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 6.963394] UBIFS (ubi0:1): read-only UBI device | |
| [ 6.963436] UBIFS error (ubi0:1 pid 903): ubifs_mount: too few LEBs (5), min. is 17 | |
| [ 6.967561] mount_root: failed to mount -t ubifs /dev/ubi0_1 /tmp/overlay: Invalid argument | |
| [ 6.975538] urandom-seed: Seed file not found (/etc/urandom.seed) | |
| [ 7.020377] procd: - early - | |
| [ 7.020469] procd: - watchdog - | |
| [ 7.575773] procd: - watchdog - | |
| [ 7.576330] procd: - ubus - | |
| [ 7.731719] procd: - init - | |
| Please press Enter to activate this console. | |
| [ 7.983739] kmodloader: loading kernel modules from /etc/modules.d/* | |
| [ 8.103307] hid: raw HID events driver (C) Jiri Kosina | |
| [ 8.114812] Bluetooth: Core ver 2.22 | |
| [ 8.114933] NET: Registered PF_BLUETOOTH protocol family | |
| [ 8.117462] Bluetooth: HCI device and connection manager initialized | |
| [ 8.122769] Bluetooth: HCI socket layer initialized | |
| [ 8.129197] Bluetooth: L2CAP socket layer initialized | |
| [ 8.133705] Bluetooth: SCO socket layer initialized | |
| [ 8.140650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 8.143592] Bluetooth: BNEP filters: protocol multicast | |
| [ 8.149172] Bluetooth: BNEP socket layer initialized | |
| [ 8.157876] usbcore: registered new interface driver btusb | |
| [ 8.159764] Loading modules backported from Linux version v6.9.9-0-g28fdf4518483 | |
| [ 8.164689] Backport generated by backports.git v6.1.97-1-29-gf1d24a3683b2 | |
| [ 8.173028] Bluetooth: HCI UART driver ver 2.3 | |
| [ 8.178851] Bluetooth: HCI UART protocol H4 registered | |
| [ 8.183260] Bluetooth: HCI UART protocol BCSP registered | |
| [ 8.189303] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| [ 8.193862] Bluetooth: HIDP socket layer initialized | |
| [ 8.196201] urngd: v1.0.2 started. | |
| [ 8.209924] NET: Registered PF_QIPCRTR protocol family | |
| [ 8.211860] Bluetooth: RFCOMM TTY layer initialized | |
| [ 8.213969] Bluetooth: RFCOMM socket layer initialized | |
| [ 8.218760] Bluetooth: RFCOMM ver 1.11 | |
| [ 8.265234] PPP generic driver version 2.4.2 | |
| [ 8.266219] NET: Registered PF_PPPOX protocol family | |
| [ 8.278863] ath11k c000000.wifi: ipq8074 hw2.0 | |
| [ 8.278899] ath11k c000000.wifi: FW memory mode: 0 | |
| [ 8.326374] remoteproc remoteproc0: powering up cd00000.q6v5_wcss | |
| [ 8.326707] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 | |
| [ 9.572950] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up | |
| [ 9.616886] ath11k c000000.wifi: qmi ignore invalid mem req type 3 | |
| [ 9.624357] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff | |
| [ 9.624393] ath11k c000000.wifi: fw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 | |
| [ 9.749517] ath11k c000000.wifi: qmi failed to load CAL data file:cal-ahb-c000000.wifi.bin | |
| [ 9.749610] ath11k c000000.wifi: failed to load board data file: -12 | |
| BusyBox v1.36.1 (2024-07-27 21:57:30 UTC) built-in shell (ash) | |
| _______ ________ __ | |
| | |.-----.-----.-----.| | | |.----.| |_ | |
| | - || _ | -__| || | | || _|| _| | |
| |_______|| __|_____|__|__||________||__| |____| | |
| |__| W I R E L E S S F R E E D O M | |
| ----------------------------------------------------- | |
| OpenWrt SNAPSHOT, r0-de4be02 | |
| ----------------------------------------------------- | |
| === WARNING! ===================================== | |
| There is no root password defined on this device! | |
| Use the "passwd" command to set up a new password | |
| in order to prevent unauthorized SSH logins. | |
| -------------------------------------------------- | |
| root@(none):/# uhtuaname -a | |
| Linux (none) 6.6.41 #0 SMP Sat Jul 27 21:57:30 2024 aarch64 GNU/Linux | |
| root@(none):/# pfw_proot@(none):/# fw_print[ 32.484154] l11: disabling | |
| eroot@(none):/# fw_printenv | |
| Cannot parse config file '/etc/fw_env.config': No such file or directory | |
| Failed to find NVMEM device | |
| root@(none):/# cat ./oricprocroot@(none):/# cat /proc/meroot@(none):/# cat /proc/meminfo | |
| MemTotal: 1914800 kB | |
| MemFree: 1851068 kB | |
| MemAvailable: 1859012 kB | |
| Buffers: 0 kB | |
| Cached: 22028 kB | |
| SwapCached: 0 kB | |
| Active: 11232 kB | |
| Inactive: 11512 kB | |
| Active(anon): 736 kB | |
| Inactive(anon): 0 kB | |
| Active(file): 10496 kB | |
| Inactive(file): 11512 kB | |
| Unevictable: 0 kB | |
| Mlocked: 0 kB | |
| SwapTotal: 0 kB | |
| SwapFree: 0 kB | |
| Dirty: 0 kB | |
| Writeback: 0 kB | |
| AnonPages: 736 kB | |
| Mapped: 1700 kB | |
| Shmem: 20 kB | |
| KReclaimable: 5724 kB | |
| Slab: 20208 kB | |
| SReclaimable: 5724 kB | |
| SUnreclaim: 14484 kB | |
| KernelStack: 1504 kB | |
| PageTables: 220 kB | |
| SecPageTables: 0 kB | |
| NFS_Unstable: 0 kB | |
| Bounce: 0 kB | |
| WritebackTmp: 0 kB | |
| CommitLimit: 957400 kB | |
| Committed_AS: 1816 kB | |
| VmallocTotal: 257687552 kB | |
| VmallocUsed: 10264 kB | |
| VmallocChunk: 0 kB | |
| Percpu: 480 kB | |
| root@(none):/# cat /procroot@(none):/# cat /proc/pcpuroot@(none):/# cat /proc/cpuinfo | |
| processor : 0 | |
| BogoMIPS : 38.40 | |
| Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid | |
| CPU implementer : 0x41 | |
| CPU architecture: 8 | |
| CPU variant : 0x0 | |
| CPU part : 0xd03 | |
| CPU revision : 4 | |
| processor : 1 | |
| BogoMIPS : 38.40 | |
| Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid | |
| CPU implementer : 0x41 | |
| CPU architecture: 8 | |
| CPU variant : 0x0 | |
| CPU part : 0xd03 | |
| CPU revision : 4 | |
| processor : 2 | |
| BogoMIPS : 38.40 | |
| Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid | |
| CPU implementer : 0x41 | |
| CPU architecture: 8 | |
| CPU variant : 0x0 | |
| CPU part : 0xd03 | |
| CPU revision : 4 | |
| processor : 3 | |
| BogoMIPS : 38.40 | |
| Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid | |
| CPU implementer : 0x41 | |
| CPU architecture: 8 | |
| CPU variant : 0x0 | |
| CPU part : 0xd03 | |
| CPU revision : 4 | |
| root@(none):/# uci show network | |
| uci: Entry not found | |
| root@(none):/# root@(none):/# uci show networkroot@(none):/# cat /proc/cpuinfo root@(none):/# cat /proc/meminfo root@(none):/# fw_printenv root@(none):/# uname -a[ 69.604137] ath11k c000000.wifi: Coldboot Calibration timed out | |
| [ 69.607237] kmodloader: done loading kernel modules from /etc/modules.d/* | |
| root@(none):/# fw_printenv root@(none):/# cat /proc/meminfo root@(none):/# fw_printenv | |
| Cannot parse config file '/etc/fw_env.config': No such file or directory | |
| Failed to find NVMEM device | |
| root@(none):/# ip addr show | |
| 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1000 | |
| link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
| 2: miireg: <> mtu 0 qdisc noop state DOWN qlen 1000 | |
| link/generic | |
| 3: wan: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 | |
| link/ether d8:ec:5e:94:e5:61 brd ff:ff:ff:ff:ff:ff | |
| 4: lan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 | |
| link/ether d8:ec:5e:94:e5:62 brd ff:ff:ff:ff:ff:ff | |
| 5: lan2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 | |
| link/ether 52:4c:a9:41:2c:52 brd ff:ff:ff:ff:ff:ff | |
| 6: lan3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 | |
| link/ether ea:49:26:bd:8a:2f brd ff:ff:ff:ff:ff:ff | |
| root@(none):/# vi /etc/wcoroot@(none):/# vi /etc/config/wiuci | |
| Usage: uci [<options>] <command> [<arguments>] | |
| Commands: | |
| batch | |
| export [<config>] | |
| import [<config>] | |
| changes [<config>] | |
| commit [<config>] | |
| add <config> <section-type> | |
| add_list <config>.<section>.<option>=<string> | |
| del_list <config>.<section>.<option>=<string> | |
| show [<config>[.<section>[.<option>]]] | |
| get <config>.<section>[.<option>] | |
| set <config>.<section>[.<option>]=<value> | |
| delete <config>[.<section>[[.<option>][=<id>]]] | |
| rename <config>.<section>[.<option>]=<name> | |
| revert <config>[.<section>[.<option>]] | |
| reorder <config>.<section>=<position> | |
| Options: | |
| -c <path> set the search path for config files (default: /etc/config) | |
| -d <str> set the delimiter for list values in uci show | |
| -f <file> use <file> as input instead of stdin | |
| -m when importing, merge data into an existing package | |
| -n name unnamed sections on export (default) | |
| -N don't name unnamed sections | |
| -p <path> add a search path for config change files | |
| -P <path> add a search path for config change files and use as default | |
| -t <path> set save path for config change files | |
| -q quiet mode (don't print error messages) | |
| -s force strict mode (stop on parser errors, default) | |
| -S disable strict mode | |
| -X do not use extended syntax on 'show' | |
| root@(none):/# uci show | |
| dhcp.@dnsmasq[0]=dnsmasq | |
| dhcp.@dnsmasq[0].domainneeded='1' | |
| dhcp.@dnsmasq[0].boguspriv='1' | |
| dhcp.@dnsmasq[0].filterwin2k='0' | |
| dhcp.@dnsmasq[0].localise_queries='1' | |
| dhcp.@dnsmasq[0].rebind_protection='1' | |
| dhcp.@dnsmasq[0].rebind_localhost='1' | |
| dhcp.@dnsmasq[0].local='/lan/' | |
| dhcp.@dnsmasq[0].domain='lan' | |
| dhcp.@dnsmasq[0].expandhosts='1' | |
| dhcp.@dnsmasq[0].nonegcache='0' | |
| dhcp.@dnsmasq[0].cachesize='1000' | |
| dhcp.@dnsmasq[0].authoritative='1' | |
| dhcp.@dnsmasq[0].readethers='1' | |
| dhcp.@dnsmasq[0].leasefile='/tmp/dhcp.leases' | |
| dhcp.@dnsmasq[0].resolvfile='/tmp/resolv.conf.d/resolv.conf.auto' | |
| dhcp.@dnsmasq[0].nonwildcard='1' | |
| dhcp.@dnsmasq[0].localservice='1' | |
| dhcp.@dnsmasq[0].ednspacket_max='1232' | |
| dhcp.@dnsmasq[0].filter_aaaa='0' | |
| dhcp.@dnsmasq[0].filter_a='0' | |
| dhcp.lan=dhcp | |
| dhcp.lan.interface='lan' | |
| dhcp.lan.start='100' | |
| dhcp.lan.limit='150' | |
| dhcp.lan.leasetime='12h' | |
| dhcp.lan.dhcpv4='disabled' | |
| dhcp.lan.dhcpv6='disabled' | |
| dhcp.lan.ra='disabled' | |
| dhcp.lan.ra_slaac='1' | |
| dhcp.lan.ra_flags='managed-config' 'other-config' | |
| dhcp.wan=dhcp | |
| dhcp.wan.interface='wan' | |
| dhcp.wan.ignore='1' | |
| dhcp.odhcpd=odhcpd | |
| dhcp.odhcpd.maindhcp='0' | |
| dhcp.odhcpd.leasefile='/tmp/hosts/odhcpd' | |
| dhcp.odhcpd.leasetrigger='/usr/sbin/odhcpd-update' | |
| dhcp.odhcpd.loglevel='4' | |
| dropbear.@dropbear[0]=dropbear | |
| dropbear.@dropbear[0].PasswordAuth='on' | |
| dropbear.@dropbear[0].RootPasswordAuth='on' | |
| dropbear.@dropbear[0].Port='22' | |
| firewall.@defaults[0]=defaults | |
| firewall.@defaults[0].syn_flood='1' | |
| firewall.@defaults[0].input='REJECT' | |
| firewall.@defaults[0].output='ACCEPT' | |
| firewall.@defaults[0].forward='REJECT' | |
| firewall.@zone[0]=zone | |
| firewall.@zone[0].name='lan' | |
| firewall.@zone[0].network='lan' | |
| firewall.@zone[0].input='ACCEPT' | |
| firewall.@zone[0].output='ACCEPT' | |
| firewall.@zone[0].forward='ACCEPT' | |
| firewall.@zone[1]=zone | |
| firewall.@zone[1].name='wan' | |
| firewall.@zone[1].network='wan' 'wan6' | |
| firewall.@zone[1].input='REJECT' | |
| firewall.@zone[1].output='ACCEPT' | |
| firewall.@zone[1].forward='REJECT' | |
| firewall.@zone[1].masq='1' | |
| firewall.@zone[1].mtu_fix='1' | |
| firewall.@forwarding[0]=forwarding | |
| firewall.@forwarding[0].src='lan' | |
| firewall.@forwarding[0].dest='wan' | |
| firewall.@rule[0]=rule | |
| firewall.@rule[0].name='Allow-DHCP-Renew' | |
| firewall.@rule[0].src='wan' | |
| firewall.@rule[0].proto='udp' | |
| firewall.@rule[0].dest_port='68' | |
| firewall.@rule[0].target='ACCEPT' | |
| firewall.@rule[0].family='ipv4' | |
| firewall.@rule[1]=rule | |
| firewall.@rule[1].name='Allow-Ping' | |
| firewall.@rule[1].src='wan' | |
| firewall.@rule[1].proto='icmp' | |
| firewall.@rule[1].icmp_type='echo-request' | |
| firewall.@rule[1].family='ipv4' | |
| firewall.@rule[1].target='ACCEPT' | |
| firewall.@rule[2]=rule | |
| firewall.@rule[2].name='Allow-IGMP' | |
| firewall.@rule[2].src='wan' | |
| firewall.@rule[2].proto='igmp' | |
| firewall.@rule[2].family='ipv4' | |
| firewall.@rule[2].target='ACCEPT' | |
| firewall.@rule[3]=rule | |
| firewall.@rule[3].name='Allow-DHCPv6' | |
| firewall.@rule[3].src='wan' | |
| firewall.@rule[3].proto='udp' | |
| firewall.@rule[3].dest_port='546' | |
| firewall.@rule[3].family='ipv6' | |
| firewall.@rule[3].target='ACCEPT' | |
| firewall.@rule[4]=rule | |
| firewall.@rule[4].name='Allow-MLD' | |
| firewall.@rule[4].src='wan' | |
| firewall.@rule[4].proto='icmp' | |
| firewall.@rule[4].src_ip='fe80::/10' | |
| firewall.@rule[4].icmp_type='130/0' '131/0' '132/0' '143/0' | |
| firewall.@rule[4].family='ipv6' | |
| firewall.@rule[4].target='ACCEPT' | |
| firewall.@rule[5]=rule | |
| firewall.@rule[5].name='Allow-ICMPv6-Input' | |
| firewall.@rule[5].src='wan' | |
| firewall.@rule[5].proto='icmp' | |
| firewall.@rule[5].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' 'router-solicitation' 'neighbour-solicitation' 'router-advertisement' 'neighbour-advertisement' | |
| firewall.@rule[5].limit='1000/sec' | |
| firewall.@rule[5].family='ipv6' | |
| firewall.@rule[5].target='ACCEPT' | |
| firewall.@rule[6]=rule | |
| firewall.@rule[6].name='Allow-ICMPv6-Forward' | |
| firewall.@rule[6].src='wan' | |
| firewall.@rule[6].dest='*' | |
| firewall.@rule[6].proto='icmp' | |
| firewall.@rule[6].icmp_type='echo-request' 'echo-reply' 'destination-unreachable' 'packet-too-big' 'time-exceeded' 'bad-header' 'unknown-header-type' | |
| firewall.@rule[6].limit='1000/sec' | |
| firewall.@rule[6].family='ipv6' | |
| firewall.@rule[6].target='ACCEPT' | |
| firewall.@rule[7]=rule | |
| firewall.@rule[7].name='Allow-IPSec-ESP' | |
| firewall.@rule[7].src='wan' | |
| firewall.@rule[7].dest='lan' | |
| firewall.@rule[7].proto='esp' | |
| firewall.@rule[7].target='ACCEPT' | |
| firewall.@rule[8]=rule | |
| firewall.@rule[8].name='Allow-ISAKMP' | |
| firewall.@rule[8].src='wan' | |
| firewall.@rule[8].dest='lan' | |
| firewall.@rule[8].dest_port='500' | |
| firewall.@rule[8].proto='udp' | |
| firewall.@rule[8].target='ACCEPT' | |
| root@(none):/# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment