Skip to content

Instantly share code, notes, and snippets.

@kinsleykajiva

kinsleykajiva/installation guide.md

Last active August 21, 2022 11:23
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save kinsleykajiva/5ee2122ad9c549fc10a88c14c725023d to your computer and use it in GitHub Desktop.
Save kinsleykajiva/5ee2122ad9c549fc10a88c14c725023d to your computer and use it in GitHub Desktop.
Download ZIP
How to Install Janus Gateway on Ubuntu/Debian OS.
Raw
installation guide.md

Hi, here are the steps that worked for me , 2022 August .
here official guide is https://github.com/meetecho/janus-gateway
This seeks to help those who have had a problem in installing based on the other guides so this may be an option. By the way this will install the latest version of janus [Assuming branch is master] .
Make sure you have c++ base compiler or c++ env are set globally other most builds will fail . make sure CMAKE_CXX_COMPILER is found .

run the following steps

  • sudo aptitude install libmicrohttpd-dev
  • sudo aptitude install libmicrohttpd-dev
  • sudo aptitude install libjansson-dev
  • sudo aptitude install libssl-dev
  • sudo apt install libsrtp2-dev
  • sudo aptitude install libsofia-sip-ua-dev
  • sudo aptitude install libglib2.0-dev
  • sudo aptitude install libopus-dev
  • sudo aptitude install libogg-dev
  • sudo aptitude install libcurl4-openssl-dev
  • sudo aptitude install liblua5.3-dev
  • sudo aptitude install libconfig-dev
  • sudo aptitude install pkg-config
  • sudo aptitude install libtool automake
  • sudo apt install libnice-dev
  • sudo apt-get -y install libsrtp2-dev
  • sudo apt install supervisor
  • git clone https://github.com/sctplab/usrsctp && cd usrsctp && ./bootstrap && ./configure --prefix=/usr --disable-programs --disable-inet --disable-inet6 && make && sudo make install && cd ..
  • git clone https://libwebsockets.org/repo/libwebsockets && cd libwebsockets && mkdir build && cd build && cmake -DLWS_MAX_SMP=1 -DLWS_WITHOUT_EXTENSIONS=0 -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_C_FLAGS="-fpic" ..
  • make && sudo make install
  • cd .. && cd ..
  • git clone https://github.com/eclipse/paho.mqtt.c.git && cd paho.mqtt.c && make && sudo make install && cd ..
  • sudo aptitude install libnanomsg-dev
  • git clone https://github.com/alanxz/rabbitmq-c && cd rabbitmq-c && git submodule init && git submodule update && mkdir build && cd build && cmake -DCMAKE_INSTALL_PREFIX=/usr .. && make && sudo make install && cd .. && cd ..
  • sudo aptitude install doxygen graphviz
  • git clone https://github.com/meetecho/janus-gateway.git && cd janus-gateway && sh autogen.sh
  • sudo mkdir /opt/janus && sudo mkdir /opt/janus/bin && sudo ./configure --prefix=/opt/janus && sudo make && sudo make install
  • sudo make configs
  • sudo ./configure --enable-docs

At point your are done installing janus as much .Now lets run the application using supervisor that you installed on step sudo apt install supervisor to run janus as a service in the background run sudo nano /etc/supervisor/conf.d/janus.conf paste this into the terminal

        [program:janus]
        command=/opt/janus/bin/janus
        user=root
        autostart=true
        autorestart=true
        stderr_logfile=/var/log/janus.err.log
        stdout_logfile=/var/log/janus.out.log
  • to save press CTRL + O and press Enter or return key to save . press Ctrl + X to exit and run the following command:
  • sudo supervisorctl reread && sudo supervisorctl update
  • to reload restart janus or service run sudo supervisorctl reload


to test open http://localhost:8088/janus/info or http://ipaddress:8088/janus/info


Here is another option to run all the above commands in a single line . This may have errors do review and give feedback to make it better for others as well . 
sudo apt-get -y update && sudo apt-get -y install aptitude && \
sudo apt install -y cmake && \
sudo apt-get -y install build-essential && \
sudo apt-get -y install g++ && \
sudo aptitude -y install libmicrohttpd-dev && \
sudo aptitude -y install  libjansson-dev && \
sudo aptitude -y install 	libssl-dev && \
sudo apt  -y install libsrtp2-dev && \
sudo aptitude -y install libsofia-sip-ua-dev && \
sudo aptitude -y install libglib2.0-dev && \
sudo aptitude -y install 	libopus-dev && \
sudo aptitude -y install libogg-dev && \
sudo aptitude -y install libcurl4-openssl-dev && \
sudo aptitude -y install liblua5.3-dev && \
sudo aptitude -y install 	libconfig-dev && \
sudo aptitude -y install pkg-config && \
sudo aptitude -y install libtool automake && \
sudo apt -y install libnice-dev && \
sudo apt-get -y install libsrtp2-dev && \
sudo apt install supervisor && \
clear && echo "#########################################################################"  && \
echo "##################### Done.Doing Repo Packages###########################"  && \
echo "#########################################################################"  && \
sudo apt-get -y install libusrsctp-dev  && \
git clone https://libwebsockets.org/repo/libwebsockets && cd libwebsockets && mkdir build && cd build && cmake -DLWS_MAX_SMP=1 -DLWS_WITHOUT_EXTENSIONS=0 -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_C_FLAGS="-fpic" ..  && \
make && sudo make install && \
cd .. && cd .. && \
clear && echo ">> Step:INSTALLING paho.mqtt.c"  && \
git clone https://github.com/eclipse/paho.mqtt.c.git && cd paho.mqtt.c && make && sudo make install && cd .. && \
sudo aptitude -y install libnanomsg-dev && \
clear && echo ">> Step:INSTALLING rabbitmq-c"  && \
git clone https://github.com/alanxz/rabbitmq-c  && cd rabbitmq-c  && git submodule init  && git submodule update  && mkdir build && cd build  && cmake -DCMAKE_INSTALL_PREFIX=/usr ..  && make && sudo make install && cd .. && cd .. && \
clear && echo ">> Step:INSTALLING doxygen graphviz "  && \
sudo aptitude -y install doxygen graphviz && \
clear && echo ">> Step:INSTALLING janus-gateway FROM GITHUB "  && \
git clone https://github.com/meetecho/janus-gateway.git && cd janus-gateway && sh autogen.sh && \
sudo mkdir /opt/janus && sudo mkdir /opt/janus/bin && sudo ./configure --prefix=/opt/janus && sudo  make && sudo  make install && \
sudo make configs && \
sudo ./configure --enable-docs && cd .. && \
clear && echo ">> Step:SYSTEM CONFIG using supervisor "  && \
sudo mkdir -p /etc/supervisor/conf.d/ && \
FILE=/etc/supervisor/conf.d/janus.conf && sudo mkdir -p "$(dirname "$FILE")" && sudo touch "$FILE" && \
sudo sh -c 'printf "[program:janus]\n command=/opt/janus/bin/janus\n user=root\n autostart=true\n autorestart=true\n stderr_logfile=/var/log/janus.err.log\n stdout_logfile=/var/log/janus.out.log\n\n" >/etc/supervisor/conf.d/janus.conf' && \
sudo supervisorctl reread  && sudo supervisorctl update && \
sudo supervisorctl reload && \
clear && echo "###################################################################################################"  && \
echo "##################### Done.To test open http://localhost:8088/janus/info ##########################"  && \
echo "###################################################################################################"

Native installation configurations files path - /opt/janus/etc/janus/

  • Meaning for example janus.jcfg file path is /opt/janus/etc/janus/janus.jcfg to edit you run sudo nano /opt/janus/etc/janus/janus.jcfg Remember if you wisht to reload is **sudo supervisorctl reload**
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment