Navigation Menu

Skip to content

Instantly share code, notes, and snippets.

@kitsook

kitsook/dmesg.txt

Created March 26, 2019 04:01
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save kitsook/2cd0546487732f188475761ad915354e to your computer and use it in GitHub Desktop.
Save kitsook/2cd0546487732f188475761ad915354e to your computer and use it in GitHub Desktop.
Download ZIP
Jetson Nano
Raw
dmesg.txt
~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
[ 0.000000] OF: fdt: - 80000000 , 7ee00000
[ 0.000000] OF: fdt: - 100000000 , 7f200000
[ 0.000000] Found tegra_fbmem: 00800000@92cb6000
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[ 0.000000] On node 0 totalpages: 1039872
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
[ 0.000000] Normal zone: 8136 pages used for memmap
[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208
[ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb6000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 131072 bytes
[ 0.000000] early log buf free: 29384(89%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3567872K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 116480K reserved, 475136K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB)
[ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB)
[ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB)
[ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB)
[ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[ 0.000000] t210 clock and reset probe
[ 0.000000] boot misc1 0x90000000: expected 0x10000000
[ 0.000000] (comparison mask = 0xf8000000)
[ 0.000000] boot misc2 0x0: expected 0xf6e0f620
[ 0.000000] (comparison mask = 0xffffffff)
[ 0.000000] boot misc3 0xf5c1: expected 0x10000
[ 0.000000] (comparison mask = 0xffffffff)
[ 0.000000] PLL_D2 already enabled. Postponing set full defaults
[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001504] Console: colour dummy device 80x25
[ 0.002445] console [tty0] enabled
[ 0.002471] kmemleak: Kernel memory leak detector disabled
[ 0.002501] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.002528] pid_max: default: 32768 minimum: 301
[ 0.002986] Security Framework initialized
[ 0.003218] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003238] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004502] ftrace: allocating 46802 entries in 183 pages
[ 0.175987] sched-energy: CPU device node has no sched-energy-costs
[ 0.176021] ASID allocator initialised with 65536 entries
[ 0.211762] tegra-id: chipid=22117.
[ 0.211804] tegra-id: opt_subrevision=0.
[ 0.211832] Tegra Speedo/IDDQ fuse revision 4
[ 0.211847] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.211864] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
[ 0.211879] Tegra: CPU Speedo Value 2024, SoC Speedo Value 1932, GPU Speedo Value 2029
[ 0.211899] Tegra: CPU IDDQ Value 1780, SoC IDDQ Value 2056, GPU IDDQ Value 2430
[ 0.211935] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
[ 0.211961] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[ 0.211995] DTB Build time: Mar 15 2019 09:52:07
[ 0.261099] CPU1: Booted secondary processor [411fd071]
[ 0.292995] CPU2: Booted secondary processor [411fd071]
[ 0.324988] CPU3: Booted secondary processor [411fd071]
[ 0.325079] Brought up 4 CPUs
[ 0.325144] SMP: Total of 4 processors activated.
[ 0.325162] CPU features: detected feature: 32-bit EL0 Support
[ 0.325441] CPU: All CPU(s) started at EL2
[ 0.325471] alternatives: patching kernel code
[ 0.333784] devtmpfs: initialized
[ 0.368812] Initilizing CustomIPI irq domain
[ 0.369270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.369320] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.380737] pinctrl core: initialized pinctrl subsystem
[ 0.381469] OS set in device tree is not L4T.
[ 0.381913] regulator-dummy: no parameters
[ 0.382199] Initializing plugin-manager
[ 0.382366] Plugin module not found
[ 0.382581] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[ 0.383124] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[ 0.383891] node /plugin-manager/fragment@5 match with board 3449-0000-200
[ 0.387202] NET: Registered protocol family 16
[ 0.388572] pstore: using zlib compression
[ 0.389295] console [pstore-1] enabled
[ 0.389312] pstore: Registered ramoops as persistent store backend
[ 0.389331] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.405115] cpuidle: using governor menu
[ 0.409065] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.410630] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
[ 0.410676] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.413690] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.415290] tegra_bpmp_of_clk_init: EMC proxy not found.
[ 0.416260] tegra_powergate_init: DONE
[ 0.416299] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
[ 0.416336] DTB Build time: Mar 15 2019 09:52:07
[ 0.418001] Tegra reboot handler registered.
[ 0.422452] iommu: Adding device tegra-carveouts to group 0
[ 0.422630] platform tegra-carveouts: domain=ffffffc0f9400318 allocates as[0]=ffffffc0f9bd40a8
[ 0.423008] iommu: Adding device smmu_test to group 1
[ 0.423075] platform smmu_test: domain=ffffffc0f9400558 allocates as[0]=ffffffc0f9bd4110
[ 0.423941] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[ 0.424019] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[ 0.424094] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[ 0.424117] nv-tegra-mc 70019000.mc: No mssnvlink node
[ 0.424153] mc-err: mcerr ops are set to t21x
[ 0.433949] iommu: Adding device 70090000.xusb to group 2
[ 0.434258] iommu: Adding device 70006000.serial to group 3
[ 0.434362] platform 70006000.serial: domain=ffffffc0f9489618 allocates as[0]=ffffffc0f9bd4178
[ 0.434810] iommu: Adding device 70006040.serial to group 4
[ 0.435121] iommu: Adding device 70006200.serial to group 5
[ 0.435365] iommu: Adding device sound to group 6
[ 0.435423] platform sound: domain=ffffffc0f9489b58 allocates as[0]=ffffffc0f9bd41e0
[ 0.435991] iommu: Adding device 7000d400.spi to group 7
[ 0.436270] iommu: Adding device 7000d600.spi to group 8
[ 0.436572] iommu: Adding device 70410000.spi to group 9
[ 0.436890] iommu: Adding device 50000000.host1x to group 10
[ 0.437250] iommu: Adding device 54080000.vi to group 11
[ 0.437676] iommu: Adding device 54600000.isp to group 12
[ 0.437958] iommu: Adding device 54680000.isp to group 13
[ 0.438281] iommu: Adding device tegradc.0 to group 14
[ 0.438352] platform tegradc.0: domain=ffffffc0f9496a98 allocates as[0]=ffffffc0f9bd4248
[ 0.442548] platform tegradc.0: IOVA linear map 0x0000000092cb6000(800000)
[ 0.442961] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[ 0.443315] iommu: Adding device tegradc.1 to group 15
[ 0.443381] platform tegradc.1: domain=ffffffc0f9496cd8 allocates as[0]=ffffffc0f9bd42b0
[ 0.447697] platform tegradc.1: IOVA linear map 0x0000000092cb6000(800000)
[ 0.448111] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[ 0.448389] iommu: Adding device 54340000.vic to group 16
[ 0.448620] iommu: Adding device 544c0000.nvenc to group 17
[ 0.448837] iommu: Adding device 54500000.tsec to group 18
[ 0.449089] iommu: Adding device 54100000.tsecb to group 19
[ 0.449301] iommu: Adding device 54480000.nvdec to group 20
[ 0.449544] iommu: Adding device 54380000.nvjpg to group 21
[ 0.450596] iommu: Adding device 546c0000.i2c to group 22
[ 0.450944] iommu: Adding device 57000000.gpu to group 23
[ 0.451011] platform 57000000.gpu: domain=ffffffc0f94a5cd8 allocates as[0]=ffffffc0f9bd4318
[ 0.451068] platform 57000000.gpu: domain=ffffffc0f94a5cd8 allocates as[1]=ffffffc0f9bd4380
[ 0.451125] platform 57000000.gpu: domain=ffffffc0f94a5cd8 allocates as[2]=ffffffc0f9bd43e8
[ 0.451183] platform 57000000.gpu: domain=ffffffc0f94a5cd8 allocates as[3]=ffffffc0f9bd4450
[ 0.452111] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[ 0.452153] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.452181] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[ 0.452202] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[ 0.452219] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.505180] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.505216] tegra-pmc: Clear bootloader IO dpd settings
[ 0.505248] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.505328] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[ 0.505643] iommu: Adding device 70012000.se to group 24
[ 0.506448] iommu: Adding device 7000c000.i2c to group 25
[ 0.506726] iommu: Adding device 7000c400.i2c to group 26
[ 0.506988] iommu: Adding device 7000c500.i2c to group 27
[ 0.507255] iommu: Adding device 7000c700.i2c to group 28
[ 0.507562] iommu: Adding device 7000d000.i2c to group 29
[ 0.507830] iommu: Adding device 7000d100.i2c to group 30
[ 0.508148] iommu: Adding device sdhci-tegra.0 to group 31
[ 0.508218] platform sdhci-tegra.0: domain=ffffffc0f953ce58 allocates as[0]=ffffffc0f9bd44b8
[ 0.509113] iommu: Adding device 700d0000.xudc to group 32
[ 0.513769] vdd-ac-bat: 5000 mV
[ 0.514150] vdd-5v0-sys: 5000 mV
[ 0.515137] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[ 0.515226] vdd-5v0-hdmi: 5000 mV
[ 0.515660] vdd-1v8: 1800 mV
[ 0.516065] vdd-fan: supplied by vdd-5v0-sys
[ 0.516121] vdd-fan: 5000 mV
[ 0.516554] vdd-usb-vbus: supplied by vdd-5v0-sys
[ 0.516631] vdd-usb-vbus: 5000 mV
[ 0.517204] vdd-usb-vbus2: 5000 mV
[ 0.550136] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.552795] GPIO line 151 (camera-control-output-low) hogged as output/low
[ 0.553203] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[ 0.561363] eventlib_kernel: keventlib is initialized, test id: 0
[ 0.561753] SCSI subsystem initialized
[ 0.562032] libata version 3.00 loaded.
[ 0.562333] usbcore: registered new interface driver usbfs
[ 0.562426] usbcore: registered new interface driver hub
[ 0.562525] usbcore: registered new device driver usb
[ 0.566690] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[ 0.568098] random: fast init done
[ 0.572392] vdd-core: 600 <--> 1162 mV at 1125 mV
[ 0.573661] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[ 0.576248] vdd-ddr-1v1: 1150 mV
[ 0.580334] vdd-pre-reg-1v35: 1350 mV
[ 0.584238] vdd-1v8: 1800 mV
[ 0.584531] vdd-1v8: Failed to create debugfs directory
[ 0.588235] avdd-sys-1v2: 1200 mV
[ 0.592239] vdd-pex-1v0: 1050 mV
[ 0.593058] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[ 0.593707] max77620-ldo3: at 3100 mV
[ 0.596239] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[ 0.596891] max77620-ldo5: at 3100 mV
[ 0.597548] max77620-ldo6: at 2800 mV
[ 0.600250] avdd-1v05-pll: 1050 mV
[ 0.604236] avdd-io-hdmi-dp: 1050 mV
[ 0.605804] GPIO line 505 (spmic-default-output-high) hogged as output/high
[ 0.606102] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[ 0.608201] max77620 4-003c: max77620 probe successful
[ 0.610536] i2c i2c-6: Unbalanced pm_runtime_enable!
[ 0.611096] media: Linux media interface: v0.10
[ 0.611172] Linux video capture interface: v2.00
[ 0.612129] pps_core: LinuxPPS API ver. 1 registered
[ 0.612159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.612209] PTP clock support registered
[ 0.615445] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
[ 0.621775] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[ 0.622706] Advanced Linux Sound Architecture Driver Initialized.
[ 0.623400] Bluetooth: Core ver 2.22
[ 0.623473] NET: Registered protocol family 31
[ 0.623491] Bluetooth: HCI device and connection manager initialized
[ 0.623518] Bluetooth: HCI socket layer initialized
[ 0.623539] Bluetooth: L2CAP socket layer initialized
[ 0.623580] Bluetooth: SCO socket layer initialized
[ 0.625341] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.625379] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.625441] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.625469] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.628291] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.629705] vdd-3v3-sys: supplied by vdd-5v0-sys
[ 0.629816] vdd-3v3-sys: 3300 mV
[ 0.630109] vdd-1v8: supplied by vdd-3v3-sys
[ 0.632312] vdd-usb-vbus2: supplied by vdd-3v3-sys
[ 0.632791] vdd-3v3-sd: supplied by vdd-3v3-sys
[ 0.632844] vdd-3v3-sd: 3300 mV
[ 0.634131] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[ 0.634189] avdd-io-edp-1v05: 1050 mV
[ 0.634678] vdd-usb-hub-en: supplied by vdd-1v8
[ 0.634731] vdd-usb-hub-en: 5000 mV
[ 0.636088] camchar: rtcpu character device driver loaded
[ 0.636854] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 0.638239] clocksource: Switched to clocksource arch_sys_counter
[ 0.678210] VFS: Disk quotas dquot_6.6.0
[ 0.678449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.678975] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.679423] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[ 0.679470] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[ 0.679719] cma: enabled page replacement for spfn=d7000, epfn=f0000
[ 0.679746] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[ 0.679772] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[ 0.679821] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[ 0.679847] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[ 0.679882] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[ 0.679903] nvmap_page_pool_init: Total RAM pages: 1010752
[ 0.679921] nvmap_page_pool_init: nvmap page pool size: 126344 pages (493 MB)
[ 0.680069] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.680468] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.681514] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[ 0.689714] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 0.690137] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 0.690450] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 0.690685] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.690908] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[ 0.691212] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[ 0.691233] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
[ 0.691689] NET: Registered protocol family 2
[ 0.692668] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.692908] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.693459] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.693633] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.693731] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.694152] NET: Registered protocol family 1
[ 0.694968] RPC: Registered named UNIX socket transport module.
[ 0.694998] RPC: Registered udp transport module.
[ 0.695014] RPC: Registered tcp transport module.
[ 0.695031] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.695059] PCI: CLS 0 bytes, default 64
[ 0.695300] Trying to unpack rootfs image as initramfs...
[ 0.704730] host1x 50000000.host1x: initialized
[ 0.707050] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.710304] audit: initializing netlink subsys (disabled)
[ 0.710401] audit: type=2000 audit(0.563:1): initialized
[ 0.711177] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.721704] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.723291] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.724118] 9p: Installing v9fs 9p2000 file system support
[ 0.727644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 0.727803] io scheduler noop registered
[ 0.728112] io scheduler cfq registered (default)
[ 0.730936] gic 702f9000.agic: GIC IRQ controller registered
[ 0.733919] iommu: Adding device 702ef000.adsp to group 33
[ 0.740715] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[ 0.740923] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[ 0.741534] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7a47c11
[ 0.741568] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[ 0.743761] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[ 0.743895] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[ 0.744017] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[ 0.744232] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[ 0.744343] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[ 0.744452] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[ 0.744564] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[ 0.744673] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[ 0.744787] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[ 0.744902] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[ 0.751314] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[ 0.752678] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 0.754647] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
[ 0.755943] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[ 0.756325] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
[ 0.757559] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 0.757819] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
[ 0.758064] Adding domain tsec-pd to PM domain host1x-pd
[ 0.760066] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[ 0.761115] tsec 54500000.tsec: initialized
[ 0.762902] tsec 54100000.tsecb: initialized
[ 0.763652] Adding domain nvdec-pd to PM domain host1x-pd
[ 0.766897] nvdec 54480000.nvdec: initialized
[ 0.767966] Adding domain vic03-pd to PM domain host1x-pd
[ 0.768170] Adding domain msenc-pd to PM domain host1x-pd
[ 0.768353] Adding domain nvjpg-pd to PM domain host1x-pd
[ 0.772039] falcon 54340000.vic: initialized
[ 0.773259] falcon 544c0000.nvenc: initialized
[ 0.774683] falcon 54380000.nvjpg: initialized
[ 0.779362] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[ 0.779494] display board info: id 0x0, fab 0x0
[ 0.779568] generic_infoframe_type: 0x87
[ 0.779712] tegradc tegradc.0: DT parsed successfully
[ 0.779773] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
[ 0.780480] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781
[ 0.783917] tegradc tegradc.0: probed
[ 0.787477] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 0.792692] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
[ 0.793723] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[ 0.794133] kfuse 7000fc00.kfuse: initialized
[ 0.795843] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[ 0.796937] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 0.798425] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 0.798470] vdd-cpu: 708 <--> 1322 mV at 708 mV
[ 0.799083] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[ 0.800931] vdd-gpu: applied init 1000000uV constraint
[ 0.800965] vdd-gpu: 708 <--> 1323 mV at 997 mV
[ 0.801403] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[ 0.806543] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.806769] No Device Node present for smmu client: serial8250 !!
[ 0.806804] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 0.806898] iommu: Adding device serial8250 to group 35
[ 0.810657] console [ttyS0] disabled
[ 0.810839] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[ 1.231787] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 1.636111] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 2.040451] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 2.042471] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[ 2.042857] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[ 2.042867] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.042872] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 2.042878] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 2.042885] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.042931] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
[ 2.043057] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.043297] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.043475] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 2.043510] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 2.043554] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 2.043583] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 2.043790] pci 0000:01:00.0: supports D1 D2
[ 2.043794] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.058360] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.058416] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[ 2.058421] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.058430] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
[ 2.058456] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
[ 2.058479] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 2.058491] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 2.058497] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 2.058505] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
[ 2.059294] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.059299] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.059307] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 2.059433] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 3.224470] console [ttyS0] enabled
[ 3.225096] Console: switching to colour frame buffer device 240x67
[ 3.227587] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[ 3.227941] serial-tegra 70006200.serial: RX in PIO mode
[ 3.228038] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[ 3.229135] [drm] Initialized
[ 3.250751] brd: module loaded
[ 3.264610] tegradc tegradc.0: fb registered
[ 3.269163] loop: module loaded
[ 3.272483] tegra_profiler: version: 1.132, samples/io: 46/26
[ 3.277620] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
[ 3.277664] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m
[ 3.278167] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL.
[ 3.278177] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL.
[ 3.278524] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 3.278527] Extcon AUX1(HDMI) enable
[ 3.279400] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[ 3.279475] tegradc tegradc.1: No lt-data, using default setting
[ 3.279504] tegradc tegradc.1: No hpd-gpio in DT
[ 3.279534] tegradc tegradc.1: DT parsed successfully
[ 3.279590] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
[ 3.280964] tegradc tegradc.1: dpd enable lookup fail:-19
[ 3.285244] tegradc tegradc.1: probed
[ 3.292930] edid invalid
[ 3.320636] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
[ 3.369089] tegradc tegradc.1: fb registered
[ 3.369228] tegra_profiler: auth: init
[ 3.370748] THERMAL EST: found 2 subdevs
[ 3.370754] THERMAL EST num_resources: 0
[ 3.370760] [THERMAL EST subdev 0]
[ 3.370767] [THERMAL EST subdev 1]
[ 3.371245] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[ 3.371248] THERMAL EST: thz register success.
[ 3.371434] THERMAL EST: end of probe, return err: 0
[ 3.372853] hisi_sas: driver version v1.6
[ 3.377152] tegra-qspi 70410000.spi: Prod settings list not found
[ 3.378476] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[ 3.378485] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[ 3.381735] libphy: Fixed MDIO Bus: probed
[ 3.382930] tun: Universal TUN/TAP device driver, 1.6
[ 3.382933] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.384009] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.384012] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.384067] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.384069] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.384122] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.384124] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.384175] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[ 3.384176] Copyright(c) 1999 - 2017 Intel Corporation.
[ 3.385074] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.385103] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 3.399320] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[ 3.399484] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e3:fe:1f from device tree
[ 3.400120] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 3.400160] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 3.400841] PPP generic driver version 2.4.2
[ 3.401112] PPP BSD Compression module registered
[ 3.401117] PPP Deflate Compression module registered
[ 3.401156] PPP MPPE Compression module registered
[ 3.401163] NET: Registered protocol family 24
[ 3.401236] usbcore: registered new interface driver r8152
[ 3.401284] usbcore: registered new interface driver asix
[ 3.401351] usbcore: registered new interface driver ax88179_178a
[ 3.401398] usbcore: registered new interface driver cdc_ether
[ 3.401436] usbcore: registered new interface driver net1080
[ 3.401486] usbcore: registered new interface driver cdc_subset
[ 3.401579] usbcore: registered new interface driver zaurus
[ 3.401647] usbcore: registered new interface driver cdc_ncm
[ 3.401835] VFIO - User Level meta-driver version: 0.3
[ 3.403207] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.403231] ehci-pci: EHCI PCI platform driver
[ 3.403280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.403290] ohci-pci: OHCI PCI platform driver
[ 3.403333] ohci-platform: OHCI generic platform driver
[ 3.406134] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[ 3.406922] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[ 3.408128] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9693c00 id
[ 3.408247] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
[ 3.408249] tegra-xusb 70090000.xusb: Falling back to user helper
[ 3.409678] usbcore: registered new interface driver uas
[ 3.409734] usbcore: registered new interface driver usb-storage
[ 3.409856] usbcore: registered new interface driver usbserial
[ 3.413282] tegra-xudc-new 700d0000.xudc: device count: 1
[ 3.414706] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 3.414730] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 3.414768] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 3.415042] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 3.415770] mousedev: PS/2 mouse device common for all mice
[ 3.415859] usbcore: registered new interface driver xpad
[ 3.544006] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 3.546599] rtc rtc1: alarm rtc device
[ 3.546616] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 3.546648] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 3.547251] i2c /dev entries driver
[ 3.548894] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
[ 3.572212] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[ 3.572280] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[ 3.572308] imx219 6-0010: board setup failed
[ 3.572411] imx219: probe of 6-0010 failed with error -121
[ 3.573454] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 3.576572] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 3.576577] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[ 3.577016] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.577034] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[ 3.577042] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[ 3.577171] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.577180] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[ 3.577185] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[ 3.577330] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.577339] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[ 3.577344] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[ 3.577553] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 3.578416] tegra_aotag tegra-aotag: Registering sensor 0
[ 3.578473] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.578498] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.578514] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 3.578523] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 3.579462] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.579482] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[ 3.579668] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.579698] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[ 3.580150] parse_throttle_dt_data: Num cap clks = 6
[ 3.580158] parse_throttle_dt_data: clk=cclk_g type=2
[ 3.580173] parse_throttle_dt_data: clk=gpu type=4
[ 3.580203] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 3.580222] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 3.580243] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 3.580246] parse_throttle_dt_data: clk=emc type=3
[ 3.580692] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.580791] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.580927] tegra_throttle_probe: probe successful. #cdevs=4
[ 3.581726] FAN dev name: pwm-fan
[ 3.581775] FAN:gpio request success.
[ 3.581850] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 3.582157] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[ 3.582388] pwm_fan_driver pwm-fan: fan tach request irq success
[ 3.582397] pwm_fan_driver pwm-fan: tach period: 1000
[ 3.582484] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 3.582488] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 3.582492] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 3.582496] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 3.582499] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 3.582503] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 3.582506] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 3.582509] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 3.582513] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 3.582517] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 3.583170] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[ 3.583548] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[ 3.584483] device-mapper: uevent: version 1.0.3
[ 3.584974] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.590382] tegra210-cpufreq cpufreq: probe()...completed
[ 3.591078] sdhci: Secure Digital Host Controller Interface driver
[ 3.591079] sdhci: Copyright(c) Pierre Ossman
[ 3.591080] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.591560] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[ 3.591919] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[ 3.592040] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[ 3.596156] tegra-se 70012000.se: tegra_se_probe: complete
[ 3.596686] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.597811] usbcore: registered new interface driver usbhid
[ 3.597812] usbhid: USB HID core driver
[ 3.599927] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[ 3.600207] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[ 3.601981] nvpmodel: initialized successfully
[ 3.602960] usbcore: registered new interface driver snd-usb-audio
[ 3.603022] No Device Node present for smmu client: snd-soc-dummy !!
[ 3.603026] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 3.603044] iommu: Adding device snd-soc-dummy to group 36
[ 3.613923] OPE platform probe
[ 3.614004] OPE platform probe successful
[ 3.614028] OPE platform probe
[ 3.614107] OPE platform probe successful
[ 3.628768] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[ 3.642434] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[ 3.652681] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 3.652809] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 3.652933] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 3.653065] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 3.653191] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 3.653313] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 3.653439] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 3.653562] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 3.653686] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 3.653809] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 3.666567] u32 classifier
[ 3.666568] Actions configured
[ 3.666637] Initializing XFRM netlink socket
[ 3.667375] NET: Registered protocol family 10
[ 3.668086] NET: Registered protocol family 17
[ 3.668096] NET: Registered protocol family 15
[ 3.668169] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.668217] Bluetooth: RFCOMM socket layer initialized
[ 3.668226] Bluetooth: RFCOMM ver 1.11
[ 3.668230] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.668235] Bluetooth: HIDP socket layer initialized
[ 3.668252] 9pnet: Installing 9P2000 support
[ 3.668290] Key type dns_resolver registered
[ 3.672501] Registered cp15_barrier emulation handler
[ 3.672508] Registered setend emulation handler
[ 3.673611] registered taskstats version 1
[ 3.674204] Adding domain ve2-pd to PM domain host1x-pd
[ 3.674472] Adding domain ve-pd to PM domain host1x-pd
[ 3.987385] mmc0: Applying tuning correction
[ 3.987398] mmc0: Tap value after applying correction 60
[ 3.987415] mmc0: hw tuning done ...
[ 3.987445] mmc0: new ultra high speed SDR104 SDXC card at address e624
[ 3.987836] mmcblk0: mmc0:e624 SN64G 59.5 GiB
[ 3.993868] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[ 4.517037] tegradc tegradc.0: blank - powerdown
[ 4.520089] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[ 4.520092] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[ 4.520097] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[ 4.521184] isp 54600000.isp: initialized
[ 4.521996] isp 54680000.isp: initialized
[ 4.533769] clk_cbus_recalc_rate: no gbus parent
[ 4.533774] clk_cbus_round_rate: no gbus parent
[ 4.533775] clk_cbus_round_rate: no gbus parent
[ 4.533782] clk_cbus_recalc_rate: no gbus parent
[ 4.533885] clk_cbus_recalc_rate: no gbus parent
[ 4.533887] clk_cbus_round_rate: no gbus parent
[ 4.533889] clk_cbus_round_rate: no gbus parent
[ 4.533891] clk_cbus_recalc_rate: no gbus parent
[ 4.534569] tegra_dvfs: GPU-cap: registered
[ 4.534622] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[ 4.534624] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
[ 4.534625] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled
[ 4.536795] tegra_dvfs: vdd-gpu-vts: registered
[ 4.537803] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[ 4.538477] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[ 4.538977] input: gpio-keys as /devices/gpio-keys/input/input1
[ 4.560832] extcon-disp-state extcon:disp-state: cable 47 state 0
[ 4.560833] Extcon AUX1(HDMI) disable
[ 4.571011] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:27 UTC (946688427)
[ 4.571937] vi 54080000.vi: vi_probe: ++
[ 4.576246] vi 54080000.vi: initialized
[ 4.578866] vi 54080000.vi: subdev nvcsi--1 bound
[ 4.579090] mmcblk mmc0:e624: Card claimed for testing.
[ 4.580301] Disable partitions left on by BL
[ 4.580304] disb
[ 4.580350] bwmgr: missing cdev-type property
[ 4.580478] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 4.580483] DRAM derating cdev registered.
[ 4.581504] vdd-1v8: disabling
[ 4.581506] vdd-fan: disabling
[ 4.581507] vdd-usb-vbus: disabling
[ 4.581509] vdd-usb-vbus2: disabling
[ 4.581518] avdd-io-edp-1v05: disabling
[ 4.581520] vdd-usb-hub-en: disabling
[ 4.581683] ALSA device list:
[ 4.581685] #0: tegra-hda at 0x70038000 irq 83
[ 4.581687] #1: tegra-snd-t210ref-mobile-rt565x
[ 4.602218] tegradc tegradc.0: unblank
[ 4.639576] tegradc tegradc.0: nominal-pclk:181250000 parent:181248750 div:1.0 pclk:181248750 179437500~197562500
[ 4.639626] tegradc tegradc.0: hdmi: tmds rate:181250K prod-setting:prod_c_hdmi_150m_300m
[ 4.640621] tegradc tegradc.0: hdmi: get RGB quant from EDID.
[ 4.640626] tegradc tegradc.0: hdmi: get YCC quant from EDID.
[ 4.643893] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 4.643894] Extcon AUX1(HDMI) enable
[ 4.644213] tegradc tegradc.0: sync windows ret = 250
[ 5.025001] tegradc tegradc.1: blank - powerdown
[ 5.031502] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[ 5.031508] Extcon DP: HPD disabled
[ 5.031510] hpd: hpd_switch 0
[ 5.031512] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[ 5.031525] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[ 5.031529] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[ 5.076153] extcon-disp-state extcon:disp-state: cable 40 state 1
[ 5.076154] Extcon HDMI: HPD enabled
[ 5.076166] tegradc tegradc.0: hdmi: plugged
[ 5.590664] EXT4-fs (mmcblk0p1): 9 orphan inodes deleted
[ 5.597794] EXT4-fs (mmcblk0p1): recovery complete
[ 5.636026] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.645962] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 5.657465] devtmpfs: mounted
[ 5.665333] Freeing unused kernel memory: 8512K
[ 5.854339] systemd[1]: System time before build time, advancing clock.
[ 5.894418] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.912732] cgroup: cgroup2: unknown option "nsdelegate"
[ 5.935346] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.959529] systemd[1]: Detected architecture arm64.
[ 5.998884] systemd[1]: Set hostname to <clarence-jetson-nano>.
[ 6.088756] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 6.108043] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 6.260540] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.270979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.285337] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.294361] systemd[1]: Reached target User and Group Name Lookups.
[ 6.305419] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.316381] systemd[1]: Created slice User and Session Slice.
[ 6.327821] systemd[1]: Created slice System Slice.
[ 6.337592] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.410657] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 6.579857] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[ 6.867937] systemd-journald[1942]: Received request to flush runtime journal from PID 1
[ 7.552968] using random self ethernet address
[ 7.590312] using random host ethernet address
[ 7.842823] random: crng init done
[ 7.847864] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.891023] Mass Storage Function, version: 2009/09/11
[ 7.891029] LUN: removable file: (no medium)
[ 7.899879] using random self ethernet address
[ 7.906033] using random host ethernet address
[ 7.919520] rndis0: HOST MAC ca:01:d7:da:eb:68
[ 7.919660] rndis0: MAC ca:01:d7:da:eb:69
[ 7.924462] usb0: HOST MAC ca:01:d7:da:eb:6a
[ 7.924553] usb0: MAC ca:01:d7:da:eb:6b
[ 7.924576] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 7.925138] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 7.925154] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
[ 7.925184] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 7.925415] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 7.925427] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 7.926055] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 7.926074] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 7.926341] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 7.984182] tegra-xusb 70090000.xusb: cannot find firmware....retry after 1 second
[ 8.201448] l4tbr0: port 1(rndis0) entered blocking state
[ 8.201452] l4tbr0: port 1(rndis0) entered disabled state
[ 8.201881] device rndis0 entered promiscuous mode
[ 8.208489] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[ 8.215923] l4tbr0: port 2(usb0) entered blocking state
[ 8.215928] l4tbr0: port 2(usb0) entered disabled state
[ 8.217389] device usb0 entered promiscuous mode
[ 8.226892] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 8.226900] l4tbr0: port 2(usb0) entered blocking state
[ 8.226903] l4tbr0: port 2(usb0) entered forwarding state
[ 8.255802] nvs_dsm nvs_dsm: dsm_probe
[ 8.255826] nvs_dsm nvs_dsm: dsm_remove
[ 8.255828] nvs_dsm nvs_dsm: dsm_probe done
[ 8.948827] l4tbr0: port 2(usb0) entered disabled state
[ 8.951111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.952860] eth0: 0xffffff800a35e000, 00:04:4b:e3:fe:1f, IRQ 404
[ 9.006608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.017221] tegra-xusb 70090000.xusb: Firmware timestamp: 2017-11-03 13:36:19 UTC, Version: 50.20 release
[ 9.017262] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 9.017281] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
[ 9.018142] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
[ 9.018174] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
[ 9.018332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.018336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.018339] usb usb1: Product: xHCI Host Controller
[ 9.018341] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 9.018343] usb usb1: SerialNumber: 70090000.xusb
[ 9.018791] hub 1-0:1.0: USB hub found
[ 9.018820] hub 1-0:1.0: 5 ports detected
[ 9.019255] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 9.019265] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
[ 9.019343] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.019418] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.019421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.019424] usb usb2: Product: xHCI Host Controller
[ 9.019426] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 9.019428] usb usb2: SerialNumber: 70090000.xusb
[ 9.019892] hub 2-0:1.0: USB hub found
[ 9.019995] hub 2-0:1.0: 4 ports detected
[ 9.122369] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
[ 9.122622] usb usb2: usb_suspend_both: status 0
[ 9.346294] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[ 9.382821] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411
[ 9.382828] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.382832] usb 1-2: Product: 4-Port USB 2.1 Hub
[ 9.382835] usb 1-2: Manufacturer: Generic
[ 9.384135] hub 1-2:1.0: USB hub found
[ 9.386329] hub 1-2:1.0: 4 ports detected
[ 9.491441] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
[ 9.526955] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
[ 9.526961] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.526964] usb 2-1: Product: 4-Port USB 3.1 Hub
[ 9.526967] usb 2-1: Manufacturer: Generic
[ 9.531359] hub 2-1:1.0: USB hub found
[ 9.532771] hub 2-1:1.0: 4 ports detected
[ 9.674301] usb 1-2.1: new full-speed USB device number 3 using tegra-xusb
[ 9.690269] usb 2-1: usb_suspend_both: status 0
[ 9.690480] usb usb2: usb_suspend_both: status 0
[ 9.699814] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c52b
[ 9.699821] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.699824] usb 1-2.1: Product: USB Receiver
[ 9.699827] usb 1-2.1: Manufacturer: Logitech
[ 9.790292] usb 1-2.3: new low-speed USB device number 4 using tegra-xusb
[ 9.829427] usb 1-2.3: New USB device found, idVendor=04d9, idProduct=2011
[ 9.829434] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 9.829438] usb 1-2.3: Product: USB Keyboard
[ 9.840936] input: USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:04D9:2011.0004/input/input2
[ 9.898883] hid-generic 0003:04D9:2011.0004: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-70090000.xusb-2.3/input0
[ 9.922034] input: USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.1/0003:04D9:2011.0005/input/input3
[ 9.978524] hid-generic 0003:04D9:2011.0005: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-70090000.xusb-2.3/input1
[ 10.188362] logitech-djreceiver 0003:046D:C52B.0003: hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.1/input2
[ 10.334162] input: Logitech MX Anywhere 2S as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:406A.0006/input/input4
[ 10.335225] logitech-hidpp-device 0003:046D:406A.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Anywhere 2S] on usb-70090000.xusb-2.1:1
[ 10.340157] input: Logitech M720 Triathlon as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:405E.0007/input/input5
[ 10.340887] logitech-hidpp-device 0003:046D:405E.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-70090000.xusb-2.1:2
[ 10.799737] tegradc tegradc.0: blank - powerdown
[ 10.860156] extcon-disp-state extcon:disp-state: cable 47 state 0
[ 10.860158] Extcon AUX1(HDMI) disable
[ 10.880317] tegradc tegradc.0: unblank
[ 10.892261] tegradc tegradc.0: nominal-pclk:181250000 parent:181248750 div:1.0 pclk:181248750 179437500~197562500
[ 10.892338] tegradc tegradc.0: hdmi: tmds rate:181250K prod-setting:prod_c_hdmi_150m_300m
[ 10.893358] tegradc tegradc.0: hdmi: get RGB quant from EDID.
[ 10.893364] tegradc tegradc.0: hdmi: get YCC quant from EDID.
[ 10.899499] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 10.899502] Extcon AUX1(HDMI) enable
[ 10.907132] tegradc tegradc.0: unblank
[ 10.907141] tegradc tegradc.1: blank - powerdown
[ 11.675342] fuse init (API version 7.26)
[ 13.117825] r8168: eth0: link up
[ 13.117957] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.784994] tegradc tegradc.0: blank - powerdown
[ 25.849438] extcon-disp-state extcon:disp-state: cable 47 state 0
[ 25.849446] Extcon AUX1(HDMI) disable
[ 25.869702] tegradc tegradc.1: blank - powerdown
[ 26.017306] tegradc tegradc.0: blank - powerdown
[ 26.017327] tegradc tegradc.0: unblank
[ 26.023628] tegradc tegradc.0: nominal-pclk:181250000 parent:181248750 div:1.0 pclk:181248750 179437500~197562500
[ 26.023721] tegradc tegradc.0: hdmi: tmds rate:181250K prod-setting:prod_c_hdmi_150m_300m
[ 26.024741] tegradc tegradc.0: hdmi: get RGB quant from EDID.
[ 26.024748] tegradc tegradc.0: hdmi: get YCC quant from EDID.
[ 26.028106] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 26.028108] Extcon AUX1(HDMI) enable
[ 26.035804] tegradc tegradc.0: unblank
[ 26.035813] tegradc tegradc.1: blank - powerdown
[ 31.700118] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.700130] Bluetooth: BNEP socket layer initialized
[ 32.032146] tegradc tegradc.0: unblank
[ 32.032156] tegradc tegradc.1: blank - powerdown
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment