Skip to content

Instantly share code, notes, and snippets.

@laveur

laveur/mbed_config.h Secret

Created March 4, 2020 00:09
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save laveur/ddd4e670edfd2827e1b3bb9fcce02190 to your computer and use it in GitHub Desktop.
Save laveur/ddd4e670edfd2827e1b3bb9fcce02190 to your computer and use it in GitHub Desktop.
Download ZIP
mbed_config.h
Raw
mbed_config.h
/*
* mbed SDK
* Copyright (c) 2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Automatically generated configuration file.
// DO NOT EDIT, content will be overwritten.
#ifndef __MBED_CONFIG_DATA__
#define __MBED_CONFIG_DATA__
// Configuration parameters
#define LPTICKER_DELAY_TICKS 1 // set by target:FAMILY_STM32
#define MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_EVENTS_PRESENT 1 // set by library:events
#define MBED_CONF_EVENTS_SHARED_DISPATCH_FROM_APPLICATION 0 // set by library:events
#define MBED_CONF_EVENTS_SHARED_EVENTSIZE 768 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_EVENTSIZE 256 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_STACKSIZE 1024 // set by library:events
#define MBED_CONF_EVENTS_SHARED_STACKSIZE 2048 // set by library:events
#define MBED_CONF_EVENTS_USE_LOWPOWER_TIMER_TICKER 0 // set by library:events
#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform
#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform
#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform
#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_ENABLE_64_BIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_ENABLE_FLOATING_POINT 0 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_SET_FLOATING_POINT_MAX_DECIMALS 6 // set by library:platform
#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x1000 // set by target:Target
#define MBED_CONF_TARGET_CONSOLE_UART 1 // set by target:Target
#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 3 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_INIT_US_TICKER_AT_BOOT 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target
#define MBED_CONF_TARGET_TICKLESS_FROM_US_TICKER 1 // set by target:BLUEPILL_F103C8
#endif
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment