/BTHV523300EJ400NGN.txt Secret
Created
July 15, 2019 22:51
Star
You must be signed in to star a gist
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# smartctl -ax /dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV523300EJ400NGN | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-16-pve] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs | |
Device Model: INTEL SSDSC2BA400G4 | |
Serial Number: BTHV523300EJ400NGN | |
LU WWN Device Id: 5 5cd2e4 04c046a12 | |
Firmware Version: G2010160 | |
User Capacity: 400,088,457,216 bytes [400 GB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Jul 1 02:13:50 2019 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x79) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 2) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16443 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 31103 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 15 | |
170 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 | |
175 Power_Loss_Cap_Test PO--CK 100 100 010 - 7710 (135 5835) | |
183 SATA_Downshift_Count -O--CK 100 100 000 - 0 | |
184 End-to-End_Error PO--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
190 Temperature_Case -O---K 076 074 000 - 24 (Min/Max 22/26) | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 11 | |
194 Temperature_Internal -O---K 100 100 000 - 24 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
199 CRC_Error_Count -OSRCK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 8273300 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 | |
234 Thermal_Throttle -O--CK 100 100 000 - 0/0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 8273300 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 1488050 | |
243 NAND_Writes_32MiB -O--CK 100 100 000 - 10851843 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 8 Comprehensive SMART error log | |
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 2 Extended self-test log | |
0x08 GPL,SL R/O 2 Power Conditions log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xb0 GPL,SL VS 1 Device vendor specific log | |
0xb1 GPL,SL VS 33 Device vendor specific log | |
0xb8 GPL,SL VS 1 Device vendor specific log | |
0xb9 GPL VS 1544 Device vendor specific log | |
0xb9 SL VS 8 Device vendor specific log | |
0xba GPL VS 1280 Device vendor specific log | |
0xdf GPL,SL VS 1 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (20 sectors) | |
No Errors Logged | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (2 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 431174464005 7205814418028888064 Not_testing | |
2 7603812 3729709347340 Not_testing | |
3 7205816209030250496 100 Not_testing | |
4 431174464171 7205815118108557312 Not_testing | |
5 100 2630197719726 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 1 (0x0001) | |
SCT Support Level: 0 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 22/26 Celsius | |
Lifetime Min/Max Temperature: 22/38 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/70 Celsius | |
Min/Max Temperature Limit: 0/70 Celsius | |
Temperature History Size (Index): 478 (428) | |
Index Estimated Time Temperature Celsius | |
429 2019-06-30 18:16 26 ******* | |
430 2019-06-30 18:17 26 ******* | |
431 2019-06-30 18:18 26 ******* | |
432 2019-06-30 18:19 25 ****** | |
433 2019-06-30 18:20 25 ****** | |
434 2019-06-30 18:21 24 ***** | |
... ..( 4 skipped). .. ***** | |
439 2019-06-30 18:26 24 ***** | |
440 2019-06-30 18:27 23 **** | |
... ..(329 skipped). .. **** | |
292 2019-06-30 23:57 23 **** | |
293 2019-06-30 23:58 24 ***** | |
294 2019-06-30 23:59 23 **** | |
... ..( 2 skipped). .. **** | |
297 2019-07-01 00:02 23 **** | |
298 2019-07-01 00:03 24 ***** | |
299 2019-07-01 00:04 24 ***** | |
300 2019-07-01 00:05 23 **** | |
... ..( 2 skipped). .. **** | |
303 2019-07-01 00:08 23 **** | |
304 2019-07-01 00:09 24 ***** | |
305 2019-07-01 00:10 24 ***** | |
306 2019-07-01 00:11 24 ***** | |
307 2019-07-01 00:12 23 **** | |
308 2019-07-01 00:13 23 **** | |
309 2019-07-01 00:14 23 **** | |
310 2019-07-01 00:15 24 ***** | |
... ..( 5 skipped). .. ***** | |
316 2019-07-01 00:21 24 ***** | |
317 2019-07-01 00:22 23 **** | |
... ..( 3 skipped). .. **** | |
321 2019-07-01 00:26 23 **** | |
322 2019-07-01 00:27 24 ***** | |
... ..(105 skipped). .. ***** | |
428 2019-07-01 02:13 24 ***** | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 2) == | |
0x01 0x008 4 15 --- Lifetime Power-On Resets | |
0x01 0x018 6 542199020148 --- Logical Sectors Written | |
0x01 0x020 6 182166876 --- Number of Write Commands | |
0x01 0x028 6 97520892049 --- Logical Sectors Read | |
0x01 0x030 6 668719939 --- Number of Read Commands | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 24 --- Current Temperature | |
0x05 0x010 1 23 --- Average Short Term Temperature | |
0x05 0x018 1 25 --- Average Long Term Temperature | |
0x05 0x020 1 30 --- Highest Temperature | |
0x05 0x028 1 22 --- Lowest Temperature | |
0x05 0x030 1 28 --- Highest Average Short Term Temperature | |
0x05 0x038 1 23 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 25 --- Highest Average Long Term Temperature | |
0x05 0x048 1 25 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 16 --- Number of Hardware Resets | |
0x06 0x010 4 11 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
0x07 ===== = = === == Solid State Device Statistics (rev 1) == | |
0x07 0x008 1 2 --- Percentage Used Endurance Indicator | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0003 4 0 R_ERR response for device-to-host data FIS | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# smartctl -ax /dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV5233016M400NGN | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-16-pve] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs | |
Device Model: INTEL SSDSC2BA400G4 | |
Serial Number: BTHV5233016M400NGN | |
LU WWN Device Id: 5 5cd2e4 04c046d5f | |
Firmware Version: G2010160 | |
User Capacity: 400,088,457,216 bytes [400 GB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Jul 1 02:14:31 2019 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x79) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 2) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16443 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 31055 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 15 | |
170 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 | |
175 Power_Loss_Cap_Test PO--CK 100 100 010 - 7500 (135 5836) | |
183 SATA_Downshift_Count -O--CK 100 100 000 - 0 | |
184 End-to-End_Error PO--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
190 Temperature_Case -O---K 076 074 000 - 24 (Min/Max 22/26) | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 12 | |
194 Temperature_Internal -O---K 100 100 000 - 24 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
199 CRC_Error_Count -OSRCK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 8270831 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 | |
234 Thermal_Throttle -O--CK 100 100 000 - 0/0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 8270831 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 1588039 | |
243 NAND_Writes_32MiB -O--CK 100 100 000 - 10852944 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 8 Comprehensive SMART error log | |
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 2 Extended self-test log | |
0x08 GPL,SL R/O 2 Power Conditions log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xb0 GPL,SL VS 1 Device vendor specific log | |
0xb1 GPL,SL VS 33 Device vendor specific log | |
0xb8 GPL,SL VS 1 Device vendor specific log | |
0xb9 GPL VS 1544 Device vendor specific log | |
0xb9 SL VS 8 Device vendor specific log | |
0xba GPL VS 1280 Device vendor specific log | |
0xdf GPL,SL VS 1 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (20 sectors) | |
No Errors Logged | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (2 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 431174464005 7205814418028888064 Not_testing | |
2 7603556 3729709347340 Not_testing | |
3 7205816209030250496 100 Not_testing | |
4 431174464171 7205815118108557312 Not_testing | |
5 100 2630197719726 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 1 (0x0001) | |
SCT Support Level: 0 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 22/26 Celsius | |
Lifetime Min/Max Temperature: 22/36 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/70 Celsius | |
Min/Max Temperature Limit: 0/70 Celsius | |
Temperature History Size (Index): 478 (428) | |
Index Estimated Time Temperature Celsius | |
429 2019-06-30 18:17 26 ******* | |
430 2019-06-30 18:18 26 ******* | |
431 2019-06-30 18:19 26 ******* | |
432 2019-06-30 18:20 25 ****** | |
433 2019-06-30 18:21 25 ****** | |
434 2019-06-30 18:22 24 ***** | |
... ..( 4 skipped). .. ***** | |
439 2019-06-30 18:27 24 ***** | |
440 2019-06-30 18:28 23 **** | |
441 2019-06-30 18:29 24 ***** | |
442 2019-06-30 18:30 24 ***** | |
443 2019-06-30 18:31 23 **** | |
... ..(324 skipped). .. **** | |
290 2019-06-30 23:56 23 **** | |
291 2019-06-30 23:57 24 ***** | |
292 2019-06-30 23:58 23 **** | |
... ..( 3 skipped). .. **** | |
296 2019-07-01 00:02 23 **** | |
297 2019-07-01 00:03 24 ***** | |
298 2019-07-01 00:04 24 ***** | |
299 2019-07-01 00:05 23 **** | |
300 2019-07-01 00:06 23 **** | |
301 2019-07-01 00:07 23 **** | |
302 2019-07-01 00:08 24 ***** | |
... ..( 2 skipped). .. ***** | |
305 2019-07-01 00:11 24 ***** | |
306 2019-07-01 00:12 23 **** | |
307 2019-07-01 00:13 23 **** | |
308 2019-07-01 00:14 24 ***** | |
... ..( 3 skipped). .. ***** | |
312 2019-07-01 00:18 24 ***** | |
313 2019-07-01 00:19 23 **** | |
314 2019-07-01 00:20 23 **** | |
315 2019-07-01 00:21 24 ***** | |
... ..(112 skipped). .. ***** | |
428 2019-07-01 02:14 24 ***** | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 2) == | |
0x01 0x008 4 15 --- Lifetime Power-On Resets | |
0x01 0x018 6 542037245564 --- Logical Sectors Written | |
0x01 0x020 6 204771838 --- Number of Write Commands | |
0x01 0x028 6 104073776561 --- Logical Sectors Read | |
0x01 0x030 6 632956373 --- Number of Read Commands | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 24 --- Current Temperature | |
0x05 0x010 1 23 --- Average Short Term Temperature | |
0x05 0x018 1 25 --- Average Long Term Temperature | |
0x05 0x020 1 31 --- Highest Temperature | |
0x05 0x028 1 22 --- Lowest Temperature | |
0x05 0x030 1 28 --- Highest Average Short Term Temperature | |
0x05 0x038 1 23 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 25 --- Highest Average Long Term Temperature | |
0x05 0x048 1 25 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 14 --- Number of Hardware Resets | |
0x06 0x010 4 11 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
0x07 ===== = = === == Solid State Device Statistics (rev 1) == | |
0x07 0x008 1 2 --- Percentage Used Endurance Indicator | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0003 4 0 R_ERR response for device-to-host data FIS | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# smartctl -ax /dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV5233023T400NGN | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-16-pve] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs | |
Device Model: INTEL SSDSC2BA400G4 | |
Serial Number: BTHV5233023T400NGN | |
LU WWN Device Id: 5 5cd2e4 04c047170 | |
Firmware Version: G2010160 | |
User Capacity: 400,088,457,216 bytes [400 GB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Jul 1 02:14:59 2019 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x79) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 2) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16443 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 31025 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 39 | |
170 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 32 | |
175 Power_Loss_Cap_Test PO--CK 100 100 010 - 7460 (135 5836) | |
183 SATA_Downshift_Count -O--CK 100 100 000 - 0 | |
184 End-to-End_Error PO--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
190 Temperature_Case -O---K 076 074 000 - 24 (Min/Max 23/26) | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 32 | |
194 Temperature_Internal -O---K 100 100 000 - 24 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
199 CRC_Error_Count -OSRCK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 8185995 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 | |
234 Thermal_Throttle -O--CK 100 100 000 - 0/0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 8185995 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 1337899 | |
243 NAND_Writes_32MiB -O--CK 100 100 000 - 10718820 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 8 Comprehensive SMART error log | |
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 2 Extended self-test log | |
0x08 GPL,SL R/O 2 Power Conditions log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xb0 GPL,SL VS 1 Device vendor specific log | |
0xb1 GPL,SL VS 33 Device vendor specific log | |
0xb8 GPL,SL VS 1 Device vendor specific log | |
0xb9 GPL VS 1544 Device vendor specific log | |
0xb9 SL VS 8 Device vendor specific log | |
0xba GPL VS 1280 Device vendor specific log | |
0xdf GPL,SL VS 1 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (20 sectors) | |
No Errors Logged | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (2 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 431174464005 7205814418028888064 Not_testing | |
2 7603556 3729709347340 Not_testing | |
3 7205816209030250496 100 Not_testing | |
4 431174464171 7205815118108557312 Not_testing | |
5 100 2630197719726 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 1 (0x0001) | |
SCT Support Level: 0 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 23/26 Celsius | |
Lifetime Min/Max Temperature: 22/31 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/70 Celsius | |
Min/Max Temperature Limit: 0/70 Celsius | |
Temperature History Size (Index): 478 (334) | |
Index Estimated Time Temperature Celsius | |
335 2019-06-30 18:17 24 ***** | |
... ..( 14 skipped). .. ***** | |
350 2019-06-30 18:32 24 ***** | |
351 2019-06-30 18:33 23 **** | |
352 2019-06-30 18:34 23 **** | |
353 2019-06-30 18:35 24 ***** | |
354 2019-06-30 18:36 24 ***** | |
355 2019-06-30 18:37 24 ***** | |
356 2019-06-30 18:38 23 **** | |
357 2019-06-30 18:39 23 **** | |
358 2019-06-30 18:40 23 **** | |
359 2019-06-30 18:41 24 ***** | |
360 2019-06-30 18:42 23 **** | |
... ..( 4 skipped). .. **** | |
365 2019-06-30 18:47 23 **** | |
366 2019-06-30 18:48 24 ***** | |
367 2019-06-30 18:49 24 ***** | |
368 2019-06-30 18:50 23 **** | |
... ..( 2 skipped). .. **** | |
371 2019-06-30 18:53 23 **** | |
372 2019-06-30 18:54 24 ***** | |
373 2019-06-30 18:55 24 ***** | |
374 2019-06-30 18:56 23 **** | |
... ..( 2 skipped). .. **** | |
377 2019-06-30 18:59 23 **** | |
378 2019-06-30 19:00 24 ***** | |
379 2019-06-30 19:01 24 ***** | |
380 2019-06-30 19:02 23 **** | |
... ..( 3 skipped). .. **** | |
384 2019-06-30 19:06 23 **** | |
385 2019-06-30 19:07 24 ***** | |
386 2019-06-30 19:08 24 ***** | |
387 2019-06-30 19:09 23 **** | |
... ..( 2 skipped). .. **** | |
390 2019-06-30 19:12 23 **** | |
391 2019-06-30 19:13 24 ***** | |
392 2019-06-30 19:14 24 ***** | |
393 2019-06-30 19:15 24 ***** | |
394 2019-06-30 19:16 23 **** | |
395 2019-06-30 19:17 23 **** | |
396 2019-06-30 19:18 23 **** | |
397 2019-06-30 19:19 24 ***** | |
398 2019-06-30 19:20 24 ***** | |
399 2019-06-30 19:21 24 ***** | |
400 2019-06-30 19:22 23 **** | |
401 2019-06-30 19:23 23 **** | |
402 2019-06-30 19:24 23 **** | |
403 2019-06-30 19:25 24 ***** | |
... ..( 2 skipped). .. ***** | |
406 2019-06-30 19:28 24 ***** | |
407 2019-06-30 19:29 23 **** | |
408 2019-06-30 19:30 23 **** | |
409 2019-06-30 19:31 24 ***** | |
... ..( 3 skipped). .. ***** | |
413 2019-06-30 19:35 24 ***** | |
414 2019-06-30 19:36 23 **** | |
415 2019-06-30 19:37 24 ***** | |
... ..( 3 skipped). .. ***** | |
419 2019-06-30 19:41 24 ***** | |
420 2019-06-30 19:42 23 **** | |
421 2019-06-30 19:43 24 ***** | |
422 2019-06-30 19:44 24 ***** | |
423 2019-06-30 19:45 24 ***** | |
424 2019-06-30 19:46 23 **** | |
... ..( 2 skipped). .. **** | |
427 2019-06-30 19:49 23 **** | |
428 2019-06-30 19:50 24 ***** | |
429 2019-06-30 19:51 24 ***** | |
430 2019-06-30 19:52 24 ***** | |
431 2019-06-30 19:53 23 **** | |
432 2019-06-30 19:54 23 **** | |
433 2019-06-30 19:55 23 **** | |
434 2019-06-30 19:56 24 ***** | |
435 2019-06-30 19:57 24 ***** | |
436 2019-06-30 19:58 24 ***** | |
437 2019-06-30 19:59 23 **** | |
438 2019-06-30 20:00 23 **** | |
439 2019-06-30 20:01 23 **** | |
440 2019-06-30 20:02 24 ***** | |
... ..( 3 skipped). .. ***** | |
444 2019-06-30 20:06 24 ***** | |
445 2019-06-30 20:07 23 **** | |
446 2019-06-30 20:08 24 ***** | |
... ..( 3 skipped). .. ***** | |
450 2019-06-30 20:12 24 ***** | |
451 2019-06-30 20:13 23 **** | |
452 2019-06-30 20:14 23 **** | |
453 2019-06-30 20:15 24 ***** | |
... ..( 2 skipped). .. ***** | |
456 2019-06-30 20:18 24 ***** | |
457 2019-06-30 20:19 23 **** | |
458 2019-06-30 20:20 23 **** | |
459 2019-06-30 20:21 24 ***** | |
... ..( 2 skipped). .. ***** | |
462 2019-06-30 20:24 24 ***** | |
463 2019-06-30 20:25 23 **** | |
464 2019-06-30 20:26 23 **** | |
465 2019-06-30 20:27 24 ***** | |
... ..( 2 skipped). .. ***** | |
468 2019-06-30 20:30 24 ***** | |
469 2019-06-30 20:31 23 **** | |
470 2019-06-30 20:32 23 **** | |
471 2019-06-30 20:33 24 ***** | |
472 2019-06-30 20:34 24 ***** | |
473 2019-06-30 20:35 24 ***** | |
474 2019-06-30 20:36 23 **** | |
... ..( 8 skipped). .. **** | |
5 2019-06-30 20:45 23 **** | |
6 2019-06-30 20:46 24 ***** | |
7 2019-06-30 20:47 24 ***** | |
8 2019-06-30 20:48 23 **** | |
... ..( 2 skipped). .. **** | |
11 2019-06-30 20:51 23 **** | |
12 2019-06-30 20:52 24 ***** | |
13 2019-06-30 20:53 24 ***** | |
14 2019-06-30 20:54 23 **** | |
... ..( 2 skipped). .. **** | |
17 2019-06-30 20:57 23 **** | |
18 2019-06-30 20:58 24 ***** | |
19 2019-06-30 20:59 24 ***** | |
20 2019-06-30 21:00 23 **** | |
... ..( 3 skipped). .. **** | |
24 2019-06-30 21:04 23 **** | |
25 2019-06-30 21:05 24 ***** | |
26 2019-06-30 21:06 24 ***** | |
27 2019-06-30 21:07 23 **** | |
... ..( 2 skipped). .. **** | |
30 2019-06-30 21:10 23 **** | |
31 2019-06-30 21:11 24 ***** | |
32 2019-06-30 21:12 24 ***** | |
33 2019-06-30 21:13 23 **** | |
... ..( 2 skipped). .. **** | |
36 2019-06-30 21:16 23 **** | |
37 2019-06-30 21:17 24 ***** | |
38 2019-06-30 21:18 24 ***** | |
39 2019-06-30 21:19 23 **** | |
... ..( 2 skipped). .. **** | |
42 2019-06-30 21:22 23 **** | |
43 2019-06-30 21:23 24 ***** | |
44 2019-06-30 21:24 24 ***** | |
45 2019-06-30 21:25 23 **** | |
... ..( 3 skipped). .. **** | |
49 2019-06-30 21:29 23 **** | |
50 2019-06-30 21:30 24 ***** | |
51 2019-06-30 21:31 23 **** | |
... ..( 3 skipped). .. **** | |
55 2019-06-30 21:35 23 **** | |
56 2019-06-30 21:36 24 ***** | |
57 2019-06-30 21:37 23 **** | |
... ..( 64 skipped). .. **** | |
122 2019-06-30 22:42 23 **** | |
123 2019-06-30 22:43 24 ***** | |
124 2019-06-30 22:44 24 ***** | |
125 2019-06-30 22:45 24 ***** | |
126 2019-06-30 22:46 23 **** | |
127 2019-06-30 22:47 23 **** | |
128 2019-06-30 22:48 23 **** | |
129 2019-06-30 22:49 24 ***** | |
130 2019-06-30 22:50 24 ***** | |
131 2019-06-30 22:51 24 ***** | |
132 2019-06-30 22:52 23 **** | |
133 2019-06-30 22:53 23 **** | |
134 2019-06-30 22:54 23 **** | |
135 2019-06-30 22:55 24 ***** | |
136 2019-06-30 22:56 24 ***** | |
137 2019-06-30 22:57 24 ***** | |
138 2019-06-30 22:58 23 **** | |
139 2019-06-30 22:59 23 **** | |
140 2019-06-30 23:00 23 **** | |
141 2019-06-30 23:01 24 ***** | |
142 2019-06-30 23:02 24 ***** | |
143 2019-06-30 23:03 24 ***** | |
144 2019-06-30 23:04 23 **** | |
145 2019-06-30 23:05 23 **** | |
146 2019-06-30 23:06 23 **** | |
147 2019-06-30 23:07 24 ***** | |
... ..( 2 skipped). .. ***** | |
150 2019-06-30 23:10 24 ***** | |
151 2019-06-30 23:11 23 **** | |
152 2019-06-30 23:12 23 **** | |
153 2019-06-30 23:13 24 ***** | |
... ..( 6 skipped). .. ***** | |
160 2019-06-30 23:20 24 ***** | |
161 2019-06-30 23:21 23 **** | |
... ..( 3 skipped). .. **** | |
165 2019-06-30 23:25 23 **** | |
166 2019-06-30 23:26 24 ***** | |
167 2019-06-30 23:27 24 ***** | |
168 2019-06-30 23:28 24 ***** | |
169 2019-06-30 23:29 23 **** | |
170 2019-06-30 23:30 23 **** | |
171 2019-06-30 23:31 23 **** | |
172 2019-06-30 23:32 24 ***** | |
173 2019-06-30 23:33 24 ***** | |
174 2019-06-30 23:34 24 ***** | |
175 2019-06-30 23:35 23 **** | |
176 2019-06-30 23:36 23 **** | |
177 2019-06-30 23:37 23 **** | |
178 2019-06-30 23:38 24 ***** | |
... ..(155 skipped). .. ***** | |
334 2019-07-01 02:14 24 ***** | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 2) == | |
0x01 0x008 4 39 --- Lifetime Power-On Resets | |
0x01 0x018 6 536477371363 --- Logical Sectors Written | |
0x01 0x020 6 187138840 --- Number of Write Commands | |
0x01 0x028 6 87680588993 --- Logical Sectors Read | |
0x01 0x030 6 29702483 --- Number of Read Commands | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 24 --- Current Temperature | |
0x05 0x010 1 23 --- Average Short Term Temperature | |
0x05 0x018 1 25 --- Average Long Term Temperature | |
0x05 0x020 1 30 --- Highest Temperature | |
0x05 0x028 1 23 --- Lowest Temperature | |
0x05 0x030 1 29 --- Highest Average Short Term Temperature | |
0x05 0x038 1 23 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 26 --- Highest Average Long Term Temperature | |
0x05 0x048 1 25 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 18 --- Number of Hardware Resets | |
0x06 0x010 4 15 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
0x07 ===== = = === == Solid State Device Statistics (rev 1) == | |
0x07 0x008 1 2 --- Percentage Used Endurance Indicator | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0003 4 0 R_ERR response for device-to-host data FIS | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# smartctl -ax /dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV5233025E400NGN | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-16-pve] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs | |
Device Model: INTEL SSDSC2BA400G4 | |
Serial Number: BTHV5233025E400NGN | |
LU WWN Device Id: 5 5cd2e4 04c0471a7 | |
Firmware Version: G2010160 | |
User Capacity: 400,088,457,216 bytes [400 GB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Jul 1 02:15:23 2019 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x79) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 2) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16443 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 31020 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 44 | |
170 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 35 | |
175 Power_Loss_Cap_Test PO--CK 100 100 010 - 7470 (135 5836) | |
183 SATA_Downshift_Count -O--CK 100 100 000 - 0 | |
184 End-to-End_Error PO--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
190 Temperature_Case -O---K 076 074 000 - 24 (Min/Max 23/27) | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 35 | |
194 Temperature_Internal -O---K 100 100 000 - 24 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
199 CRC_Error_Count -OSRCK 100 100 000 - 277 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 8184852 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 | |
234 Thermal_Throttle -O--CK 100 100 000 - 0/0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 8184852 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 1489444 | |
243 NAND_Writes_32MiB -O--CK 100 100 000 - 10692621 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 8 Comprehensive SMART error log | |
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 2 Extended self-test log | |
0x08 GPL,SL R/O 2 Power Conditions log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xb0 GPL,SL VS 1 Device vendor specific log | |
0xb1 GPL,SL VS 33 Device vendor specific log | |
0xb8 GPL,SL VS 1 Device vendor specific log | |
0xb9 GPL VS 1544 Device vendor specific log | |
0xb9 SL VS 8 Device vendor specific log | |
0xba GPL VS 1280 Device vendor specific log | |
0xdf GPL,SL VS 1 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (20 sectors) | |
Device Error Count: 129 (device log contains only the most recent 80 errors) | |
CR = Command Register | |
FEATR = Features Register | |
COUNT = Count (was: Sector Count) Register | |
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
LH = LBA High (was: Cylinder High) Register ] LBA | |
LM = LBA Mid (was: Cylinder Low) Register ] Register | |
LL = LBA Low (was: Sector Number) Register ] | |
DV = Device (was: Device/Head) Register | |
DC = Device Control Register | |
ER = Error register | |
ST = Status register | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. | |
Error 129 [48] occurred at disk power-on lifetime: 30504 hours (1271 days + 0 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 01 00 00 c8 00 7f 0a 00 40 00 Error: ICRC, ABRT at LBA = 0xc8007f0a00 = 859001784832 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 01 00 00 c8 00 7f 0a 00 40 00 00:18:38.085 READ FPDMA QUEUED | |
60 00 00 01 00 00 fd 00 20 04 00 40 00 00:18:38.085 READ FPDMA QUEUED | |
60 00 00 01 00 00 cf 00 81 0a 00 40 00 00:18:38.083 READ FPDMA QUEUED | |
ea 00 00 00 00 00 00 00 00 00 00 00 00 00:18:37.589 FLUSH CACHE EXT | |
61 00 00 00 88 00 65 00 bc 05 28 40 00 00:18:37.589 WRITE FPDMA QUEUED | |
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. | |
Error 128 [47] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 00 30 00 82 00 fc 0d 70 40 00 Error: ICRC, ABRT at LBA = 0x8200fc0d70 = 558362266992 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 00 30 00 82 00 fc 0d 70 40 00 3d+06:42:26.553 READ FPDMA QUEUED | |
60 00 00 00 28 00 85 00 74 0d 68 40 00 3d+06:42:26.519 READ FPDMA QUEUED | |
60 00 00 00 30 00 82 00 fc 0d 10 40 00 3d+06:42:26.519 READ FPDMA QUEUED | |
60 00 00 00 28 00 85 00 74 0d 90 40 00 3d+06:42:26.519 READ FPDMA QUEUED | |
60 00 00 00 30 00 82 00 fc 0d 40 40 00 3d+06:42:26.518 READ FPDMA QUEUED | |
Error 127 [46] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 00 10 00 c4 00 bd 09 08 40 00 Error: ICRC, ABRT at LBA = 0xc400bd0908 = 841825978632 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 00 10 00 c4 00 bd 09 08 40 00 3d+06:40:46.421 READ FPDMA QUEUED | |
60 00 00 00 10 00 c4 00 ba 09 e8 40 00 3d+06:40:46.420 READ FPDMA QUEUED | |
60 00 00 00 10 00 c4 00 bb 09 38 40 00 3d+06:40:46.418 READ FPDMA QUEUED | |
60 00 00 00 10 00 c4 00 bd 09 18 40 00 3d+06:40:46.418 READ FPDMA QUEUED | |
60 00 00 00 20 00 c0 00 84 09 40 40 00 3d+06:40:46.417 READ FPDMA QUEUED | |
Error 126 [45] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 01 00 00 c2 00 99 28 00 40 00 Error: ICRC, ABRT at LBA = 0xc200992800 = 833233692672 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 01 00 00 c2 00 99 28 00 40 00 3d+06:40:10.212 READ FPDMA QUEUED | |
60 00 00 01 00 00 08 00 65 23 00 40 00 3d+06:40:09.876 READ FPDMA QUEUED | |
ea 00 00 00 00 00 00 00 00 00 00 00 00 3d+06:40:09.116 FLUSH CACHE EXT | |
61 00 00 00 10 00 ee 00 fb 0d b8 40 00 3d+06:40:09.115 WRITE FPDMA QUEUED | |
ea 00 00 00 00 00 00 00 00 00 00 00 00 3d+06:40:08.806 FLUSH CACHE EXT | |
Error 125 [44] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 00 40 00 c4 00 d3 28 30 40 00 Error: ICRC, ABRT at LBA = 0xc400d32830 = 841827428400 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 00 40 00 c4 00 d3 28 30 40 00 3d+06:40:04.047 READ FPDMA QUEUED | |
60 00 00 00 40 00 c4 00 d3 28 70 40 00 3d+06:40:04.047 READ FPDMA QUEUED | |
60 00 00 01 00 00 c4 00 c5 28 f0 40 00 3d+06:40:04.047 READ FPDMA QUEUED | |
60 00 00 00 40 00 c4 00 c7 28 f0 40 00 3d+06:40:04.047 READ FPDMA QUEUED | |
60 00 00 00 40 00 c4 00 d2 28 30 40 00 3d+06:40:04.047 READ FPDMA QUEUED | |
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. | |
Error 124 [43] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 00 c0 00 22 00 fc 03 88 40 00 Error: ICRC, ABRT at LBA = 0x2200fc0388 = 146045404040 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 00 c0 00 22 00 fc 03 88 40 00 3d+06:40:01.785 READ FPDMA QUEUED | |
60 00 00 01 00 00 22 00 f8 03 88 40 00 3d+06:40:01.785 READ FPDMA QUEUED | |
60 00 00 01 00 00 22 00 f9 03 88 40 00 3d+06:40:01.785 READ FPDMA QUEUED | |
60 00 00 01 00 00 22 00 fb 03 88 40 00 3d+06:40:01.785 READ FPDMA QUEUED | |
60 00 00 00 c0 00 22 00 f7 03 c8 40 00 3d+06:40:01.751 READ FPDMA QUEUED | |
Error 123 [42] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 01 00 00 96 00 06 23 00 40 00 Error: ICRC, ABRT at LBA = 0x9600062300 = 644245496576 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 01 00 00 96 00 06 23 00 40 00 3d+06:39:15.295 READ FPDMA QUEUED | |
60 00 00 00 08 00 96 00 03 23 70 40 00 3d+06:39:15.265 READ FPDMA QUEUED | |
60 00 00 01 00 00 65 00 df 24 00 40 00 3d+06:39:15.104 READ FPDMA QUEUED | |
60 00 00 00 40 00 20 00 1b 03 d8 40 00 3d+06:39:15.086 READ FPDMA QUEUED | |
60 00 00 00 40 00 20 00 1b 03 98 40 00 3d+06:39:15.086 READ FPDMA QUEUED | |
Error 122 [41] occurred at disk power-on lifetime: 29853 hours (1243 days + 21 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
84 -- 41 00 18 00 a8 00 1d 09 38 40 00 Error: ICRC, ABRT at LBA = 0xa8001d0938 = 721556408632 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 00 00 18 00 a8 00 1d 09 38 40 00 3d+06:30:38.005 READ FPDMA QUEUED | |
60 00 00 00 18 00 a8 00 1d 09 20 40 00 3d+06:30:38.004 READ FPDMA QUEUED | |
60 00 00 01 00 00 a8 00 1d 09 00 40 00 3d+06:30:38.004 READ FPDMA QUEUED | |
60 00 00 00 18 00 5c 00 ab 2b 58 40 00 3d+06:30:37.982 READ FPDMA QUEUED | |
60 00 00 00 18 00 5c 00 ab 2b 40 40 00 3d+06:30:37.982 READ FPDMA QUEUED | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (2 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 431174464005 7205814418028888064 Not_testing | |
2 7603812 3729709347340 Not_testing | |
3 7205816209030250496 100 Not_testing | |
4 431174464171 7205815118108557312 Not_testing | |
5 100 2630197719726 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 1 (0x0001) | |
SCT Support Level: 0 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 23/27 Celsius | |
Lifetime Min/Max Temperature: 22/34 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
00 00 62 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/70 Celsius | |
Min/Max Temperature Limit: 0/70 Celsius | |
Temperature History Size (Index): 478 (42) | |
Index Estimated Time Temperature Celsius | |
43 2019-06-30 18:18 24 ***** | |
... ..( 20 skipped). .. ***** | |
64 2019-06-30 18:39 24 ***** | |
65 2019-06-30 18:40 23 **** | |
66 2019-06-30 18:41 24 ***** | |
... ..( 10 skipped). .. ***** | |
77 2019-06-30 18:52 24 ***** | |
78 2019-06-30 18:53 23 **** | |
79 2019-06-30 18:54 24 ***** | |
... ..( 3 skipped). .. ***** | |
83 2019-06-30 18:58 24 ***** | |
84 2019-06-30 18:59 23 **** | |
85 2019-06-30 19:00 24 ***** | |
... ..( 3 skipped). .. ***** | |
89 2019-06-30 19:04 24 ***** | |
90 2019-06-30 19:05 23 **** | |
91 2019-06-30 19:06 24 ***** | |
... ..( 4 skipped). .. ***** | |
96 2019-06-30 19:11 24 ***** | |
97 2019-06-30 19:12 23 **** | |
98 2019-06-30 19:13 24 ***** | |
99 2019-06-30 19:14 24 ***** | |
100 2019-06-30 19:15 24 ***** | |
101 2019-06-30 19:16 23 **** | |
102 2019-06-30 19:17 23 **** | |
103 2019-06-30 19:18 23 **** | |
104 2019-06-30 19:19 24 ***** | |
... ..(162 skipped). .. ***** | |
267 2019-06-30 22:02 24 ***** | |
268 2019-06-30 22:03 23 **** | |
269 2019-06-30 22:04 24 ***** | |
... ..( 3 skipped). .. ***** | |
273 2019-06-30 22:08 24 ***** | |
274 2019-06-30 22:09 23 **** | |
275 2019-06-30 22:10 24 ***** | |
... ..( 3 skipped). .. ***** | |
279 2019-06-30 22:14 24 ***** | |
280 2019-06-30 22:15 23 **** | |
281 2019-06-30 22:16 24 ***** | |
... ..( 2 skipped). .. ***** | |
284 2019-06-30 22:19 24 ***** | |
285 2019-06-30 22:20 23 **** | |
286 2019-06-30 22:21 23 **** | |
287 2019-06-30 22:22 23 **** | |
288 2019-06-30 22:23 24 ***** | |
289 2019-06-30 22:24 23 **** | |
... ..( 4 skipped). .. **** | |
294 2019-06-30 22:29 23 **** | |
295 2019-06-30 22:30 24 ***** | |
296 2019-06-30 22:31 24 ***** | |
297 2019-06-30 22:32 23 **** | |
... ..( 2 skipped). .. **** | |
300 2019-06-30 22:35 23 **** | |
301 2019-06-30 22:36 24 ***** | |
302 2019-06-30 22:37 24 ***** | |
303 2019-06-30 22:38 23 **** | |
... ..( 2 skipped). .. **** | |
306 2019-06-30 22:41 23 **** | |
307 2019-06-30 22:42 24 ***** | |
... ..( 3 skipped). .. ***** | |
311 2019-06-30 22:46 24 ***** | |
312 2019-06-30 22:47 23 **** | |
313 2019-06-30 22:48 24 ***** | |
... ..( 10 skipped). .. ***** | |
324 2019-06-30 22:59 24 ***** | |
325 2019-06-30 23:00 23 **** | |
326 2019-06-30 23:01 24 ***** | |
... ..( 6 skipped). .. ***** | |
333 2019-06-30 23:08 24 ***** | |
334 2019-06-30 23:09 23 **** | |
335 2019-06-30 23:10 23 **** | |
336 2019-06-30 23:11 24 ***** | |
337 2019-06-30 23:12 23 **** | |
338 2019-06-30 23:13 24 ***** | |
... ..(181 skipped). .. ***** | |
42 2019-07-01 02:15 24 ***** | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 2) == | |
0x01 0x008 4 44 --- Lifetime Power-On Resets | |
0x01 0x018 6 536402502876 --- Logical Sectors Written | |
0x01 0x020 6 183835921 --- Number of Write Commands | |
0x01 0x028 6 97612211396 --- Logical Sectors Read | |
0x01 0x030 6 40086996 --- Number of Read Commands | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 24 --- Current Temperature | |
0x05 0x010 1 23 --- Average Short Term Temperature | |
0x05 0x018 1 27 --- Average Long Term Temperature | |
0x05 0x020 1 33 --- Highest Temperature | |
0x05 0x028 1 23 --- Lowest Temperature | |
0x05 0x030 1 30 --- Highest Average Short Term Temperature | |
0x05 0x038 1 23 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 27 --- Highest Average Long Term Temperature | |
0x05 0x048 1 27 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 23 --- Number of Hardware Resets | |
0x06 0x010 4 20 --- Number of ASR Events | |
0x06 0x018 4 277 --- Number of Interface CRC Errors | |
0x07 ===== = = === == Solid State Device Statistics (rev 1) == | |
0x07 0x008 1 2 --- Percentage Used Endurance Indicator | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0003 4 0 R_ERR response for device-to-host data FIS | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment