Created
June 4, 2017 16:59
-
-
Save lpellegr/e99620e8a72b2f1d08fc1cab446fcfed to your computer and use it in GitHub Desktop.
/etc/bluetooth/main.conf
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[General] | |
# Default adapter name | |
# Defaults to 'BlueZ X.YZ' | |
#Name = BlueZ | |
# Default device class. Only the major and minor device class bits are | |
# considered. Defaults to '0x000000'. | |
#Class = 0x000100 | |
# How long to stay in discoverable mode before going back to non-discoverable | |
# The value is in seconds. Default is 180, i.e. 3 minutes. | |
# 0 = disable timer, i.e. stay discoverable forever | |
#DiscoverableTimeout = 0 | |
# How long to stay in pairable mode before going back to non-discoverable | |
# The value is in seconds. Default is 0. | |
# 0 = disable timer, i.e. stay pairable forever | |
#PairableTimeout = 0 | |
# Automatic connection for bonded devices driven by platform/user events. | |
# If a platform plugin uses this mechanism, automatic connections will be | |
# enabled during the interval defined below. Initially, this feature | |
# intends to be used to establish connections to ATT channels. Default is 60. | |
#AutoConnectTimeout = 60 | |
# Use vendor id source (assigner), vendor, product and version information for | |
# DID profile support. The values are separated by ":" and assigner, VID, PID | |
# and version. | |
# Possible vendor id source values: bluetooth, usb (defaults to usb) | |
#DeviceID = bluetooth:1234:5678:abcd | |
# Do reverse service discovery for previously unknown devices that connect to | |
# us. This option is really only needed for qualification since the BITE tester | |
# doesn't like us doing reverse SDP for some test cases (though there could in | |
# theory be other useful purposes for this too). Defaults to 'true'. | |
#ReverseServiceDiscovery = true | |
# Enable name resolving after inquiry. Set it to 'false' if you don't need | |
# remote devices name and want shorter discovery cycle. Defaults to 'true'. | |
#NameResolving = true | |
# Enable runtime persistency of debug link keys. Default is false which | |
# makes debug link keys valid only for the duration of the connection | |
# that they were created for. | |
#DebugKeys = false | |
# Restricts all controllers to the specified transport. Default value | |
# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW). | |
# Possible values: "dual", "bredr", "le" | |
#ControllerMode = dual | |
# Enables Multi Profile Specification support. This allows to specify if | |
# system supports only Multiple Profiles Single Device (MPSD) configuration | |
# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple | |
# Devices (MPMD) configurations. | |
# Possible values: "off", "single", "multiple" | |
#MultiProfile = off | |
# Permanently enables the Fast Connectable setting for adapters that | |
# support it. When enabled other devices can connect faster to us, | |
# however the tradeoff is increased power consumptions. This feature | |
# will fully work only on kernel version 4.1 and newer. Defaults to | |
# 'false'. | |
#FastConnectable = false | |
# Default privacy setting. | |
# Enables use of private address. | |
# Possible values: "off", "device", "network" | |
# "network" option not supported currently | |
# Defaults to "off" | |
# Privacy = off | |
[Policy] | |
# | |
# The ReconnectUUIDs defines the set of remote services that should try | |
# to be reconnected to in case of a link loss (link supervision | |
# timeout). The policy plugin should contain a sane set of values by | |
# default, but this list can be overridden here. By setting the list to | |
# empty the reconnection feature gets disabled. | |
#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb | |
# ReconnectAttempts define the number of attempts to reconnect after a link | |
# lost. Setting the value to 0 disables reconnecting feature. | |
#ReconnectAttempts=7 | |
# ReconnectIntervals define the set of intervals in seconds to use in between | |
# attempts. | |
# If the number of attempts defined in ReconnectAttempts is bigger than the | |
# set of intervals the last interval is repeated until the last attempt. | |
#ReconnectIntervals=1,2,4,8,16,32,64 | |
# AutoEnable defines option to enable all controllers when they are found. | |
# This includes adapters present on start as well as adapters that are plugged | |
# in later on. Defaults to 'false'. | |
AutoEnable=true |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment