Skip to content

Instantly share code, notes, and snippets.

@lsnnt
Created June 21, 2026 09:58
Show Gist options
  • Select an option

  • Save lsnnt/3b46d1b6fb79ae4444a1179d3d2bdc05 to your computer and use it in GitHub Desktop.

Select an option

Save lsnnt/3b46d1b6fb79ae4444a1179d3d2bdc05 to your computer and use it in GitHub Desktop.
Linux version 7.1.0+ (root@183ae334d9f9) (gcc (Ubuntu 15.2.0-16ubuntu1) 15.2.0, GNU ld (GNU Binutils for Ubuntu) 2.46) #3 PREE6
Command line: console=ttyS0
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] System RAM
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] device reserved
BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] device reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000007fdffff] System RAM
BIOS-e820: [mem 0x0000000007fe0000-0x0000000007ffffff] device reserved
BIOS-e820: [gap 0x0000000008000000-0x00000000fffbffff]
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] device reserved
BIOS-e820: [gap 0x0000000100000000-0x000000fcffffffff]
BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] device reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
tsc: Fast TSC calibration using PIT
tsc: Detected 999.935 MHz processor
last_pfn = 0x7fe0 max_arch_pfn = 0x400000000
x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x000f54c0-0x000f54cf]
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: BOCHSCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: BOCHSCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Processors: 1
CPU topo: Max. logical packages: 1
CPU topo: Max. logical nodes: 1
CPU topo: Num. nodes per package: 1
CPU topo: Max. logical dies: 1
CPU topo: Max. dies per package: 1
CPU topo: Max. threads per core: 1
CPU topo: Num. cores per package: 1
CPU topo: Num. threads per package: 1
CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs
[gap 0x08000000-0xfffbffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Zone ranges:
DMA32 [mem 0x0000000000001000-0x0000000007fdffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000007fdffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000007fdffff]
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 97 pages in unavailable ranges
On node 0, zone DMA32: 32 pages in unavailable ranges
Kernel command line: console=ttyS0
printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 32638
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Console: colour VGA+ 80x25
printk: legacy console [ttyS0] enabled
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd3b38e039, max_idle_ns: 881590580833 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.87 BogoMIPS (lpj=3999740)
Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
CPU: AMD QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
mitigations: Enabled attack vectors: SMT mitigations: off
Spectre V2 : Vulnerable
Spectre V1 : Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers
x86/fpu: x87 FPU will use FXSAVE
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
VFS: Finished mounting rootfs on nullfs
Performance Events: PMU not available due to virtualization, using software events only.
signal: max sigframe size: 1040
Memory: 117056K/130552K available (4830K kernel code, 794K rwdata, 452K rodata, 580K init, 236K bss, 12784K reserved, 0K cma-r)
NET: Registered PF_NETLINK/PF_ROUTE protocol family
clocksource: Switched to clocksource tsc-early
NET: Registered PF_INET protocol family
IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 1024 (order: 1, 8192 bytes, linear)
TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
platform rtc_cmos: registered fallback platform RTC device
Initialise system trusted keyrings
workingset: timestamp_bits=62 (anon: 57) max_order=15 bucket_order=0 (anon: 0)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
wwan wwan0: port wwan0at0 attached
wwan wwan0: port wwan0at1 attached
wwan wwan1: port wwan1at0 attached
wwan wwan1: port wwan1at1 attached
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
NET: Registered PF_INET6 protocol family
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sched_clock: Marking stable (365334025, 11539050)->(379590674, -2717599)
Loading compiled-in X.509 certificates
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
VFS: Failed to pivot into new rootfs
Freeing unused kernel image (initmem) memory: 580K
Write protecting the kernel read-only data: 8192k
Freeing unused kernel image (text/rodata gap) memory: 1312K
Freeing unused kernel image (rodata/data gap) memory: 1596K
Run /sbin/init as init process
Run /etc/init as init process
Run /bin/init as init process
Run /bin/sh as init process
Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/in.
Kernel Offset: disabled
---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment