Matthew Jowett m-jowett

## HowToOTGFast.md

      
              1 file
            
          
              86 forks
            
          
              169 comments
            
          
              627 stars
            
          
                gbaman
                / HowToOTGFast.md
            
            
              Last active
              April 16, 2024 06:29
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
              
          
    Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).

1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.

2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.

3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

  
## gpu-hotplug.md

      
              6 files
            
          
              1 fork
            
          
              1 comment
            
          
              33 stars
            
          
                ArseniyShestakov
                / gpu-hotplug.md
            
            
              Last active
              February 25, 2024 03:04
            
              
                Current QEMU dual-VM configuration. Thanks to everyone who helped me!
              
          
    Check it's working

DRI_PRIME=1 glxinfo | grep OpenGL
Unbind AMD GPU from Radeon driver

echo "1002 6719" > /sys/bus/pci/drivers/vfio-pci/new_id
echo "0000:01:00.0" > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
echo "0000:01:00.0" > /sys/bus/pci/drivers/vfio-pci/bind
echo "1002 6719" > /sys/bus/pci/drivers/vfio-pci/remove_id
echo "1002 aa80" > /sys/bus/pci/drivers/vfio-pci/new_id
echo "0000:01:00.1" > /sys/bus/pci/devices/0000:01:00.1/driver/unbind