ywrobot-i2c-lcd-backpack.ino

/* YourDuino.com Example Software Sketch
  16 character 2 line I2C Display
  Backpack Interface labelled "YwRobot Arduino LCM1602 IIC V1"
  terry@yourduino.com */
// Copied from tkkrlab

/*-----( Import needed libraries )-----*/
#include <Wire.h>  // Comes with Arduino IDE
// Get the LCD I2C Library here:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads
// Move any other LCD libraries to another folder or delete them
// See Library "Docs" folder for possible commands etc.
#include <LiquidCrystal_I2C.h>

/*-----( Declare Constants )-----*/
/*-----( Declare objects )-----*/
// set the LCD address to 0x27 for a 20 chars 4 line display
// Set the pins on the I2C chip used for LCD connections:
//                    addr, en,rw,rs,d4,d5,d6,d7,bl,blpol
LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);  // Set the LCD I2C address

void setup(){
  lcd.begin(16,2);
  lcd.backlight();
  lcd.setCursor(0, 0);
  lcd.print("Hello World");
}


void loop(){
}

Saving this for later use, for some reason a lot of libraries are broken.
Had to download LiquidCrystal_V1.2.1 and change "I2CIO.cpp" to #include <Wire.h> instead of <../Wire/Wire.h>