This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[0] welcome to lk | |
[10] platform_init() | |
[10] target_init() | |
[20] Keypad initialized for Dragonboard | |
[20] display_init | |
[20] Config MIPI_CMD_PANEL. | |
[130] Turn on MIPI_CMD_PANEL. | |
[1720] Serial No: 188010103221300500 | |
[1720] MAC Address: 00d0caf1b340 | |
[2030] | |
kernel @ 811ae004 (5629464 bytes) | |
[2030] ramdisk @ 8115c000 (334499 bytes) | |
[2030] cmdline = 'console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 maxcpus=2' | |
[2050] | |
Booting Linux | |
[2050] Power on reason 32 | |
[2050] booting linux @ 0x811ae004, ramdisk @ 0x8115c000 (334499) | |
[2060] cmdline: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 maxcpus=2 wlan_mac=00d0caf1b340 androidb | |
oot.emmc=true androidboot.serialno=188010103221300500 androidboot.baseband=msm | |
[ 0.000000] Booting Linux on physical CPU 0 | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Linux version 3.0.21-perf-g290b967-00049-g70b5bfc (git@qualcommonb) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Mar 14 19:32:03 PDT 2013 | |
[ 0.000000] CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache | |
[ 0.000000] Machine: APQ8060A Dragonboard | |
[ 0.000000] WLAN init with mac address: 00d0caf1b340 | |
[ 0.000000] WLAN convert to 00:d0:ca:f1:b3:40 | |
[ 0.000000] memory pool 3 (start bf300000 size d00000) initialized | |
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc | |
[ 0.000000] socinfo_init: v6, id=124, ver=4.1, raw_id=1920, raw_ver=7, hw_plat=1, hw_plat_ver=65536 | |
[ 0.000000] accessory_chip=0 hw_plat_subtype=0 | |
[ 0.000000] Zone PFN ranges: | |
[ 0.000000] Normal 0x00080200 -> 0x000a8400 | |
[ 0.000000] HighMem 0x000a8400 -> 0x000c0000 | |
[ 0.000000] Movable zone start PFN for each node | |
[ 0.000000] early_node_map[3] active PFN ranges | |
[ 0.000000] 0: 0x00080200 -> 0x00088e00 | |
[ 0.000000] 0: 0x00090000 -> 0x0009fe00 | |
[ 0.000000] 0: 0x000a3900 -> 0x000bf300 | |
[ 0.000000] allocating 28016640 bytes at c17b3000 (819b3000 physical) for fb | |
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c326e000 s11136 r8192 d13440 u32768 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211998 | |
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 maxcpus=2 wlan_mac=0 | |
0d0caf1b340 androidboot.emmc=true androidboot.serialno=188010103221300500 androidboot.baseband=msm | |
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000] Memory: 140MB 254MB 442MB = 836MB total | |
[ 0.000000] Memory: 804812k/878540k available, 51252k reserved, 375808K highmem | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) | |
[ 0.000000] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB) | |
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
[ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB) | |
[ 0.000000] .text : 0xc0100000 - 0xc0b80b54 (10755 kB) | |
[ 0.000000] .data : 0xc0c00000 - 0xc0d345f0 (1234 kB) | |
[ 0.000000] .bss : 0xc0d34614 - 0xc0f5b264 (2204 kB) | |
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS:1129 | |
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms | |
[ 0.000000] Console: colour dummy device 80x30 | |
[ 0.150190] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655) | |
[ 0.150221] pid_max: default: 32768 minimum: 301 | |
[ 0.150587] Mount-cache hash table entries: 512 | |
[ 0.151625] Initializing cgroup subsys debug | |
[ 0.151655] Initializing cgroup subsys cpuacct | |
[ 0.151716] Initializing cgroup subsys freezer | |
[ 0.151777] CPU: Testing write buffer coherency: ok | |
[ 0.152083] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available | |
[ 0.160323] Brought up 2 CPUs | |
[ 0.160354] SMP: Total of 2 processors activated (27.06 BogoMIPS). | |
[ 0.174484] print_constraints: dummy: | |
[ 0.174820] NET: Registered protocol family 16 | |
[ 0.175003] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver | |
[ 0.177262] meminfo_init: smem ram ptable found: ver: 0 len: 5 | |
[ 0.177292] Found 1 memory banks grouped into 8 memory regions | |
[ 0.177598] msm_rpm_init: RPM firmware 3.0.16842893 | |
[ 0.197436] saw_probe: id=0, name=8921_s5 | |
[ 0.197772] saw_probe: id=1, name=8921_s6 | |
[ 0.198077] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en | |
[ 0.198351] pm8921_probe: PMIC revision 1: F4 | |
[ 0.198382] pm8921_probe: PMIC revision 2: 06 | |
[ 0.198382] pm8921_probe: PMIC version: PM8921 rev 3.0 | |
[ 0.198412] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion) | |
[ 0.200122] pm_gpio_probe: OK: base=152, ngpio=44 | |
[ 0.200488] pm8xxx_mpp_probe: OK: base=196, ngpio=12 | |
[ 0.205066] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en | |
[ 0.219136] get_pvs: ACPU PVS: Nominal | |
[ 0.219136] select_freq_plan: Max ACPU freq: 1512000 KHz | |
[ 0.222249] cpufreq_table_init: CPU0: 12 scaling frequencies supported. | |
[ 0.222279] cpufreq_table_init: CPU1: 12 scaling frequencies supported. | |
[ 0.224568] QDSS arch initialized | |
[ 0.227285] sps:REVISION of BAM 0xe1828000 is 0x5. | |
[ 0.227315] sps:BAM 0x12244000 is registered. | |
[ 0.227834] sps:sps is ready. | |
[ 0.229909] iommu_dev: device vpe mapped at e1c00000, with 2 ctx banks | |
[ 0.230032] iommu_dev: device mdp0 mapped at e1e00000, with 2 ctx banks | |
[ 0.230154] iommu_dev: device mdp1 mapped at e2000000, with 2 ctx banks | |
[ 0.230306] iommu_dev: device rot mapped at e2200000, with 2 ctx banks | |
[ 0.230428] iommu_dev: device ijpeg mapped at e2400000, with 2 ctx banks | |
[ 0.230550] iommu_dev: device vfe mapped at e2600000, with 2 ctx banks | |
[ 0.230703] iommu_dev: device vcodec_a mapped at e2800000, with 2 ctx banks | |
[ 0.230856] iommu_dev: device vcodec_b mapped at e2a00000, with 2 ctx banks | |
[ 0.231008] iommu_dev: device gfx3d mapped at e2c00000, with 3 ctx banks | |
[ 0.231130] iommu_dev: device jpegd mapped at e2e00000, with 2 ctx banks | |
[ 0.231283] iommu_dev: device gfx2d0 mapped at e3000000, with 2 ctx banks | |
[ 0.231435] iommu_dev: device gfx2d1 mapped at e3200000, with 2 ctx banks | |
[ 0.231649] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0 | |
[ 0.231802] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1 | |
[ 0.231954] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0 | |
[ 0.232107] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1 | |
[ 0.232260] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0 | |
[ 0.232412] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1 | |
[ 0.232565] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0 | |
[ 0.232687] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1 | |
[ 0.232839] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0 | |
[ 0.232992] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1 | |
[ 0.233145] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0 | |
[ 0.233297] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1 | |
[ 0.233450] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0 | |
[ 0.233602] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1 | |
[ 0.233755] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0 | |
[ 0.233938] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0 | |
[ 0.234091] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1 | |
[ 0.234243] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0 | |
[ 0.234396] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1 | |
[ 0.234549] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0 | |
[ 0.234732] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0 | |
[ 0.248557] bio: create slab <bio-0> at 0 | |
[ 0.248893] vgaarb: loaded | |
[ 0.249046] ION heap vmalloc created | |
[ 0.249046] ION heap mm created at a0000000 with size 3800000 | |
[ 0.249076] ION heap mm_fw created at 9fe00000 with size 1e0000 | |
[ 0.249107] ION heap mfc created at a3800000 with size 2000 | |
[ 0.249107] ION heap iommu created | |
[ 0.249137] ION heap qsecom created at bf303000 with size 780000 | |
[ 0.249137] ION heap audio created at bfa83000 with size 4cf000 | |
[ 0.260827] qup_i2c qup_i2c.10: QUP: I2C status flags :0x11143c8, irq:224 | |
[ 0.260827] qup_i2c qup_i2c.10: I2C slave addr:0x8 not connected | |
[ 0.260857] msm_smsc_hub msm_smsc_hub: failed to connect to smsc_hubthrough I2C | |
[ 0.261651] pm8xxx_pwm_probe: OK | |
[ 0.262017] SCSI subsystem initialized | |
[ 0.262139] sps:REVISION of BAM 0xe1834000 is 0x12. | |
[ 0.262200] sps:BAM 0x28084000 is registered. | |
[ 0.262871] usbcore: registered new interface driver usbfs | |
[ 0.262963] usbcore: registered new interface driver hub | |
[ 0.263024] usbcore: registered new device driver usb | |
[ 0.264459] Advanced Linux Sound Architecture Driver Version 1.0.24. | |
[ 0.264794] Bluetooth: Core ver 2.16 | |
[ 0.264825] NET: Registered protocol family 31 | |
[ 0.264825] Bluetooth: HCI device and connection manager initialized | |
[ 0.264825] Bluetooth: HCI socket layer initialized | |
[ 0.264825] Bluetooth: L2CAP socket layer initialized | |
[ 0.264977] Bluetooth: SCO socket layer initialized | |
[ 0.265069] Switching to clocksource gp_timer | |
[ 0.277277] NET: Registered protocol family 2 | |
[ 0.277369] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.277613] TCP established hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.278010] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.278406] TCP: Hash tables configured (established 65536 bind 65536) | |
[ 0.278406] TCP reno registered | |
[ 0.278406] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.278437] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.278742] NET: Registered protocol family 1 | |
[ 0.279017] RPC: Registered named UNIX socket transport module. | |
[ 0.279017] RPC: Registered udp transport module. | |
[ 0.279017] RPC: Registered tcp transport module. | |
[ 0.279047] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.279200] Trying to unpack rootfs image as initramfs... | |
[ 0.292263] Freeing initrd memory: 324K | |
[ 0.292446] PMU: registered new PMU device of type 0 | |
[ 0.292598] PMU: registered new PMU device of type 1 | |
[ 0.292873] QDSS module initialized | |
[ 0.293056] msm_etb msm_etb.0: ETB initialized | |
[ 0.293178] msm_tpiu msm_tpiu.0: TPIU initialized | |
[ 0.293331] msm_funnel msm_funnel.0: FUNNEL initialized | |
[ 0.294552] msm_etm msm_etm.0: ETM initialized | |
[ 0.295376] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot | |
[ 0.296627] pil_riva pil_riva: using secure boot | |
[ 0.298275] pil_dsps pil_dsps: using secure boot | |
[ 0.299496] smd_channel_probe_worker: allocation table not initialized | |
[ 0.303036] NET: Registered protocol family 27 | |
[ 0.303494] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead | |
[ 0.304776] lpass_fatal_init: lpass SSR driver init'ed. | |
[ 0.304837] wcnss_8960: module initialized | |
[ 0.305295] msm_rpm_log_probe: OK | |
[ 0.306790] usbcore: registered new interface driver hsic_sysmon | |
[ 0.415687] highmem bounce pool size: 64 pages | |
[ 0.415840] ashmem: initialized | |
[ 0.421944] fuse init (API version 7.16) | |
[ 0.422157] msgmni has been set to 838 | |
[ 0.423653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) | |
[ 0.423653] io scheduler noop registered | |
[ 0.423683] io scheduler deadline registered | |
[ 0.423744] io scheduler cfq registered (default) | |
[ 0.425148] mipi_dsi base phy_addr = 0x4700000 virt = 0xe3400000 | |
[ 0.425148] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1898000 | |
[ 0.425515] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wvga' | |
[ 0.425545] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wsvga' | |
[ 0.425545] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wuxga' | |
[ 0.425545] msm_fb_detect_panel: not supported 'mipi_video_novatek_qhd' | |
[ 0.425545] msm_fb_detect_panel: not supported 'mipi_cmd_novatek_qhd' | |
[ 0.425576] msm_fb_detect_panel: not supported 'mipi_video_orise_720p' | |
[ 0.425576] msm_fb_detect_panel: not supported 'mipi_cmd_orise_720p' | |
[ 0.425576] msm_fb_detect_panel: not supported 'mipi_video_renesas_fwvga' | |
[ 0.425576] msm_fb_detect_panel: not supported 'mipi_cmd_renesas_fwvga' | |
[ 0.425606] msm_fb_detect_panel: not supported 'mipi_video_nt35510_wvga' | |
[ 0.425606] msm_fb_detect_panel: not supported 'mipi_cmd_nt35510_wvga' | |
[ 0.425606] msm_fb_detect_panel: not supported 'mipi_video_truly_qhd' | |
[ 0.425606] msm_fb_detect_panel: not supported 'mipi_cmd_truly_qhd' | |
[ 0.425606] msm_fb_detect_panel: not supported 'mipi_video_chimei_wxga' | |
[ 0.425637] msm_fb_detect_panel: not supported 'mipi_video_chimei_wuxga' | |
[ 0.425637] msm_fb_detect_panel: not supported 'mipi_video_truly_wvga' | |
[ 0.425972] setting pdata->panel_info.fb_num to 3. type: 8 | |
[ 0.431161] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully! | |
[ 0.431985] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled | |
[ 0.432076] setting pdata->panel_info.fb_num to 1. type: 7 | |
[ 0.432534] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully! | |
[ 0.432717] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e059ee08 | |
[ 0.433053] setting pdata->panel_info.fb_num to 1. type: 10 | |
[ 0.433175] Inside writeback_driver_init | |
[ 0.433297] Inside writeback_probe | |
[ 0.433602] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully! | |
[ 0.434335] | |
[ 0.434335] msm_vidc_enc: Inside vid_enc_init() | |
[ 0.434426] | |
[ 0.434426] msm_vidc_enc: Inside vid_enc_vcd_init() | |
[ 0.434701] smux_ctl: smux_ctl_init Begins | |
[ 0.435067] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART | |
[ 0.465405] msm_serial_hs.1: ttyHS1 at MMIO 0x1a140000 (irq = 221) is a MSM HS UART | |
[ 0.495772] msm_serial_hs module loaded | |
[ 0.495833] msm_serial_hsl: detected port #0 | |
[ 0.495895] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM | |
[ 0.495956] msm_serial_hsl: console setup on port #0 | |
[ 1.741553] console [ttyHSL0] enabled | |
[ 1.825820] msm_serial_hsl: driver initialized | |
[ 1.830154] msm_rotator_probe: rotator_hw_revision=2 | |
[ 1.834945] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU | |
[ 1.842179] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU | |
[ 1.849015] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU | |
[ 1.859179] brd: module loaded | |
[ 1.862658] loop: module loaded | |
[ 1.865008] i2c-core: driver [isa1200] using legacy suspend method | |
[ 1.870959] i2c-core: driver [isa1200] using legacy resume method | |
[ 1.878040] tabla-slim tabla-slim: Initialized slim device tabla-slim | |
[ 1.975766] fail to get slimbus logical address -6 | |
[ 1.981443] tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim | |
[ 2.082130] wcd9xxx_device_init : Codec version 2 initialized | |
[ 2.086860] idbyte_0[00000002] idbyte_1[00000000] idbyte_2[00000000] idbyte_3[00000001] | |
[ 2.095132] i2c-core: driver [tabla-i2c-core] using legacy suspend method | |
[ 2.101602] i2c-core: driver [tabla-i2c-core] using legacy resume method | |
[ 2.109049] SCSI Media Changer driver v0.25 | |
[ 2.113444] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). | |
[ 2.122234] CSLIP: code copyright 1989 Regents of the University of California. | |
[ 2.129711] tun: Universal TUN/TAP device driver, 1.6 | |
[ 2.134503] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 2.141217] usbcore: registered new interface driver asix | |
[ 2.146101] usbcore: registered new interface driver cdc_ether | |
[ 2.151899] usbcore: registered new interface driver smsc95xx | |
[ 2.157637] usbcore: registered new interface driver net1080 | |
[ 2.163253] usbcore: registered new interface driver cdc_subset | |
[ 2.169204] usbcore: registered new interface driver zaurus | |
[ 2.174790] cdc_ncm: 04-Aug-2011 | |
[ 2.177964] usbcore: registered new interface driver cdc_ncm | |
[ 2.183580] usbcore: registered new interface driver rmnet_usb | |
[ 2.189684] rmnet usb ctrl Initialized. | |
[ 2.193254] wcnss_wlan probed in built-in mode | |
[ 2.197955] rmnet_init: BAM devices[8] | |
[ 2.204394] msm_otg msm_otg: msm_otg probe | |
[ 2.207508] msm_otg msm_otg: OTG regs = e18bc000 | |
[ 2.214008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 2.232473] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC | |
[ 2.238974] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1 | |
[ 2.275782] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12520000 | |
[ 2.295772] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00 | |
[ 2.301083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 2.307797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.314970] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC | |
[ 2.321593] usb usb1: Manufacturer: Linux 3.0.21-perf-g290b967-00049-g70b5bfc ehci_hcd | |
[ 2.329497] usb usb1: SerialNumber: msm_hsic_host | |
[ 2.334411] hub 1-0:1.0: USB hub found | |
[ 2.337921] hub 1-0:1.0: 1 port detected | |
[ 2.342377] usbcore: registered new interface driver cdc_acm | |
[ 2.347474] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
[ 2.355440] Initializing USB Mass Storage driver... | |
[ 2.360354] usbcore: registered new interface driver usb-storage | |
[ 2.366305] USB Mass Storage support registered. | |
[ 2.370914] usbcore: registered new interface driver ums-alauda | |
[ 2.376835] usbcore: registered new interface driver ums-cypress | |
[ 2.382817] usbcore: registered new interface driver ums-datafab | |
[ 2.388829] usbcore: registered new interface driver ums-freecom | |
[ 2.394781] usbcore: registered new interface driver ums-isd200 | |
[ 2.400701] usbcore: registered new interface driver ums-jumpshot | |
[ 2.406806] usbcore: registered new interface driver ums-karma | |
[ 2.412604] usbcore: registered new interface driver ums-onetouch | |
[ 2.418678] usbcore: registered new interface driver ums-sddr09 | |
[ 2.424568] usbcore: registered new interface driver ums-sddr55 | |
[ 2.430489] usbcore: registered new interface driver ums-usbat | |
[ 2.436410] usbcore: registered new interface driver usbserial | |
[ 2.442087] usbserial: USB Serial Driver core | |
[ 2.446452] USB Serial support registered for Qualcomm USB modem | |
[ 2.452464] usbcore: registered new interface driver qcserial | |
[ 2.458171] USB Serial support registered for qc_csvt | |
[ 2.463207] usbcore: registered new interface driver qc_csvt | |
[ 2.468884] usbcore: registered new interface driver usb_ehset_test | |
[ 2.475110] usbcore: registered new interface driver diag_bridge | |
[ 2.481153] usbcore: registered new interface driver mdm_bridge | |
[ 2.487654] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 | |
[ 2.492965] mbim_init: initialize 1 instances | |
[ 2.497329] mbim_init: Initialized 1 ports | |
[ 2.502456] rndis_qc_init: initialize rndis QC instance | |
[ 2.507065] android_usb gadget: Mass Storage Function, version: 2009/09/11 | |
[ 2.513505] msm_otg msm_otg: phy_reset: success | |
[ 2.518052] android_usb gadget: Number of LUNs=8 | |
[ 2.522600] lun0: LUN: removable file: (no medium) | |
[ 2.527483] lun1: LUN: removable file: (no medium) | |
[ 2.532336] lun2: LUN: removable file: (no medium) | |
[ 2.537250] lun3: LUN: removable file: (no medium) | |
[ 2.542072] lun4: LUN: removable file: (no medium) | |
[ 2.546925] lun5: LUN: removable file: (no medium) | |
[ 2.551777] lun6: LUN: removable file: (no medium) | |
[ 2.556661] lun7: LUN: removable file: (no medium) | |
[ 2.561666] android_usb gadget: android_usb ready | |
[ 2.567801] diagchar initialized now | |
[ 2.570303] mousedev: PS/2 mouse device common for all mice | |
[ 2.576682] input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0 | |
[ 2.585533] usbcore: registered new interface driver xpad | |
[ 2.590538] cyttsp_init:Cypress TrueTouch(R) Standard Product | |
[ 2.596245] cyttsp_init:I2C Touchscreen Driver (Built Mar 14 2013 @ 19:29:09) | |
[ 2.603357] Sitronix touch driver 2.9.10 | |
[ 2.607233] Release date: 20120911 | |
[ 2.610804] sitronix_ts_reset_ic | |
[ 2.705905] usb 1-1: new high speed USB device number 2 using msm_hsic_host | |
[ 2.736395] usb 1-1: New USB device found, idVendor=0424, idProduct=2640 | |
[ 2.742041] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 2.749580] hub 1-1:1.0: USB hub found | |
[ 2.752998] hub 1-1:1.0: 3 ports detected | |
[ 2.766274] status reg = 0 | |
[ 2.768808] resolution = 480 x 800 | |
[ 2.772195] Chip ID = 0 | |
[ 2.773844] Num_X = 10 | |
[ 2.776224] Num_Y = 17 | |
[ 2.779337] fw revision (hex) = 5 4 0 8 | |
[ 2.783122] i2c protocol = 1 | |
[ 2.785289] sensing mode = 0 | |
[ 2.788860] max touches = 5 | |
[ 2.791210] input: sitronix-i2c-touch-key as /devices/i2c-3/3-0055/input/input1 | |
[ 2.798596] input: sitronix-i2c-touch-mt as /devices/i2c-3/3-0055/input/input2 | |
[ 2.805737] sitronix 3-0055: irq = 334 | |
[ 2.809644] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input3 | |
[ 2.819990] using rtc device, pm8xxx_rtc, for alarms | |
[ 2.823775] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 | |
[ 2.831008] i2c /dev entries driver | |
[ 2.834579] Linux media interface: v0.10 | |
[ 2.838272] lirc_dev: IR Remote Control driver registered, major 236 | |
[ 2.844590] IR NEC protocol handler initialized | |
[ 2.849137] IR RC5(x) protocol handler initialized | |
[ 2.853868] IR RC6 protocol handler initialized | |
[ 2.858477] IR JVC protocol handler initialized | |
[ 2.862933] IR Sony protocol handler initialized | |
[ 2.867541] IR RC5 (streamzap) protocol handler initialized | |
[ 2.873096] IR LIRC bridge handler initialized | |
[ 2.877857] Linux video capture interface: v2.00 | |
[ 2.882313] usbcore: registered new interface driver uvcvideo | |
[ 2.887837] USB Video Class driver (v1.1.0) | |
[ 2.903006] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1343c8, irq:185 | |
[ 2.908591] qup_i2c qup_i2c.4: I2C slave addr:0x1a not connected | |
[ 2.914573] msm_sensor_match_id: imx074: read id failed | |
[ 2.919792] msm_sensor_i2c_probe imx074_i2c_probe failed | |
[ 2.926354] imx074: probe of 4-001a failed with error -107 | |
[ 2.941553] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1343c8, irq:185 | |
[ 2.947138] qup_i2c qup_i2c.4: I2C slave addr:0x37 not connected | |
[ 2.953120] msm_sensor_match_id: s5k3l1yx: read id failed | |
[ 2.958522] msm_sensor_i2c_probe s5k3l1yx_i2c_probe failed | |
[ 2.965267] s5k3l1yx: probe of 4-0020 failed with error -107 | |
[ 2.980619] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1343c8, irq:185 | |
[ 2.986204] qup_i2c qup_i2c.4: I2C slave addr:0x1a not connected | |
[ 2.992186] msm_sensor_match_id: imx091: read id failed | |
[ 2.997497] msm_sensor_i2c_probe imx091_i2c_probe failed | |
[ 3.004028] imx091: probe of 4-0034 failed with error -107 | |
[ 3.017945] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1343c8, irq:185 | |
[ 3.023531] qup_i2c qup_i2c.4: I2C slave addr:0x36 not connected | |
[ 3.029543] msm_sensor_match_id: ov2720: read id failed | |
[ 3.034732] msm_sensor_i2c_probe ov2720_i2c_probe failed | |
[ 3.041049] ov2720: probe of 4-006c failed with error -107 | |
[ 3.055974] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1300c8, irq:185 | |
[ 3.061559] usb 1-1.1: new high speed USB device number 3 using msm_hsic_host | |
[ 3.068701] qup_i2c qup_i2c.4: I2C slave addr:0x48 not connected | |
[ 3.074652] msm_sensor_match_id: mt9m114: read id failed | |
[ 3.079993] msm_sensor_i2c_probe mt9m114_i2c_probe failed | |
[ 3.086616] mt9m114: probe of 4-0048 failed with error -107 | |
[ 3.102426] msm_eeprom_probe probe_fail | |
[ 3.105264] usb 1-1.1: New USB device found, idVendor=0424, idProduct=4040 | |
[ 3.112101] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 3.112376] msm_sensor_register mctl_node_name[0] = video1 | |
[ 3.124919] usb 1-1.1: Product: Ultra Fast Media Reader | |
[ 3.130077] usb 1-1.1: Manufacturer: Generic | |
[ 3.134320] usb 1-1.1: SerialNumber: 000000264001 | |
[ 3.139600] scsi0 : usb-storage 1-1.1:1.0 | |
[ 3.163253] pm8xxx_tm_probe: OK | |
[ 3.166061] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com | |
[ 3.173966] cpuidle: using governor ladder | |
[ 3.177903] cpuidle: using governor menu | |
[ 3.182023] mmc0: mci-version: 18 | |
[ 3.185991] mmc0: bam physical base=0x12402000 | |
[ 3.189470] mmc0: bam virtual base=0xe18f0000 | |
[ 3.193834] sps:BAM 0x12402000 is registered. | |
[ 3.198016] mmc0: BAM device registered. bam_handle=0xe008f200 | |
[ 3.203876] sps:REVISION of BAM 0xe18f0000 is 0x5. | |
[ 3.208942] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130 | |
[ 3.215199] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800 | |
[ 3.220967] mmc0: No card detect facilities available | |
[ 3.226644] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1 | |
[ 3.234335] mmc0: 8 bit data mode enabled | |
[ 3.238699] mmc0: 4 bit data mode disabled | |
[ 3.242514] usb 1-1.2: new high speed USB device number 4 using msm_hsic_host | |
[ 3.249504] mmc0: polling status mode disabled | |
[ 3.253898] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz | |
[ 3.259606] mmc0: Slot eject status = 0 | |
[ 3.263360] mmc0: Power save feature enable = 1 | |
[ 3.267907] mmc0: SPS-BAM data transfer mode available | |
[ 3.273096] mmc1: mci-version: 18 | |
[ 3.285884] mmc1: bam physical base=0x12182000 | |
[ 3.286097] usb 1-1.2: New USB device found, idVendor=0424, idProduct=9514 | |
[ 3.286097] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 3.291591] hub 1-1.2:1.0: USB hub found | |
[ 3.291713] hub 1-1.2:1.0: 5 ports detected | |
[ 3.311521] mmc1: bam virtual base=0xe18fc000 | |
[ 3.315916] sps:BAM 0x12182000 is registered. | |
[ 3.320006] mmc1: BAM device registered. bam_handle=0xe0092600 | |
[ 3.325957] sps:REVISION of BAM 0xe18fc000 is 0x5. | |
[ 3.330932] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128 | |
[ 3.337219] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800 | |
[ 3.344117] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1 | |
[ 3.351625] mmc1: 8 bit data mode disabled | |
[ 3.355714] mmc1: 4 bit data mode enabled | |
[ 3.359713] mmc1: polling status mode disabled | |
[ 3.364169] mmc1: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz | |
[ 3.369784] mmc1: Slot eject status = 1 | |
[ 3.373630] mmc1: Power save feature enable = 1 | |
[ 3.378116] mmc1: SPS-BAM data transfer mode available | |
[ 3.383610] usbcore: registered new interface driver usbhid | |
[ 3.388860] usbhid: USB HID core driver | |
[ 3.394048] logger: created 256K log 'log_main' | |
[ 3.398718] logger: created 256K log 'log_events' | |
[ 3.403540] logger: created 256K log 'log_radio' | |
[ 3.407294] logger: created 256K log 'log_system' | |
[ 3.413551] >>Probing GYRO<< | |
[ 3.417915] mmc0: new high speed DDR MMC card at address 0001 | |
[ 3.422951] mmcblk0: mmc0:0001 SEM16G 14.8 GiB | |
[ 3.432015] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 | |
[ 3.595940] usb 1-1.2.1: new high speed USB device number 5 using msm_hsic_host | |
[ 3.615809] fail to execute sys_fchmodat, ret = -2 | |
[ 3.626522] usb 1-1.2.1: New USB device found, idVendor=0424, idProduct=ec00 | |
[ 3.632534] usb 1-1.2.1: New USB device strings: Mfr=1, Product=0, SerialNumber=0 | |
[ 3.640195] usb 1-1.2.1: Manufacturer: SMSC | |
[ 3.646665] smsc95xx v1.0.4 | |
[ 3.710605] smsc95xx 1-1.2.1:1.0: eth0: register 'smsc95xx' at usb-msm_hsic_host-1.2.1, smsc95xx USB 2.0 Ethernet, 00:d0:ca:f1:b2:fc | |
[ 3.926720] input: gyro_sensor as /devices/virtual/input/input4 | |
[ 3.931939] Registered sensors device: gyro_sensor | |
[ 3.936456] >>>lsm303dlhc magnetometer driver<<< | |
[ 3.941034] lsm303dlhc_mag: probe start | |
[ 4.136914] scsi 0:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0 | |
[ 4.145185] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
[ 4.147016] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
[ 4.147504] input: lsm303dlhc_mag as /devices/virtual/input/input5 | |
[ 4.147627] Registered sensors device: magnetometer | |
[ 4.355928] lsm303dlhc_mag 12-001e: lsm303dlh_mag probed | |
[ 4.360231] lsm303dlhc_acc accelerometer driver: init | |
[ 4.365267] lsm303dlhc_acc: probe start. | |
[ 4.369204] lsm303dlhc_acc: lsm303dlhc_acc_probe has set irq1 to irq: 298 mapped on gpio:10 | |
[ 4.377475] lsm303dlhc_acc: lsm303dlhc_acc_probe has set irq2 to irq: 355 mapped on gpio:67 | |
[ 4.385869] Registered sensors device: accelerometer | |
[ 4.390752] lsm303dlhc_acc: hw init start | |
[ 4.398382] lsm303dlhc_acc: hw init done | |
[ 4.402411] input: accelerometer as /devices/virtual/input/input6 | |
[ 4.408209] lsm303dlhc_acc 12-0019: lsm303dlhc_acc: probed | |
[ 4.413001] i2c-core: driver [lsm303dlhc_acc] using legacy suspend method | |
[ 4.419746] i2c-core: driver [lsm303dlhc_acc] using legacy resume method | |
[ 4.426430] lps331ap: probe start. | |
[ 4.430550] lps331ap I2C driver registered! | |
[ 4.438303] input: barometer_sensor as /devices/virtual/input/input7 | |
[ 4.446055] Registered sensors device: barometer_sensor | |
[ 4.450236] lps331ap 12-005d: lps331ap: probed | |
[ 4.454692] i2c-core: driver [lps331ap] using legacy suspend method | |
[ 4.461071] i2c-core: driver [lps331ap] using legacy resume method | |
[ 4.467388] usbcore: registered new interface driver snd-usb-audio | |
[ 4.475049] msm_pcm_probe: dev name msm-voip-dsp | |
[ 4.479261] msm_pcm_probe: dev name msm-pcm-dsp | |
[ 4.483290] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp | |
[ 4.488936] msm_compr_probe: dev name msm-compr-dsp | |
[ 4.493575] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa | |
[ 4.501083] msm_audio_init: Not APQ8064 in SLIMBUS mode | |
[ 4.505264] msm8930_audio_init: Not the right machine type | |
[ 4.510758] msm_audio_init: Not APQ8064 in I2S mode | |
[ 4.547749] asoc: null-codec-dai <-> MultiMedia1 mapping ok | |
[ 4.560140] asoc: null-codec-dai <-> MultiMedia2 mapping ok | |
[ 4.572440] asoc: null-codec-dai <-> CS-VOICE mapping ok | |
[ 4.584495] asoc: null-codec-dai <-> VoIP mapping ok | |
[ 4.596154] asoc: null-codec-dai <-> MultiMedia3 mapping ok | |
[ 4.608454] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok | |
[ 4.621303] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok | |
[ 4.625850] fail to execute sys_fchmodat, ret = -2 | |
[ 4.638699] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok | |
[ 4.650969] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok | |
[ 4.663360] asoc: null-codec-dai <-> MultiMedia4 mapping ok | |
[ 4.675660] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok | |
[ 4.688295] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok | |
[ 4.700747] asoc: null-codec-dai <-> VoLTE mapping ok | |
[ 4.712559] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok | |
[ 4.724980] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok | |
[ 4.737463] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok | |
[ 4.749916] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok | |
[ 4.762459] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok | |
[ 4.774973] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok | |
[ 4.787273] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok | |
[ 4.799572] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok | |
[ 4.811658] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok | |
[ 4.823744] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok | |
[ 4.836227] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok | |
[ 4.848649] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok | |
[ 5.286647] tabla_codec_get_plug_type: Detect attempt 1 and 2 are not same | |
[ 5.292537] tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file | |
[ 5.310148] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok | |
[ 5.323912] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok | |
[ 5.337707] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok | |
[ 5.351503] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok | |
[ 5.356722] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input8 | |
[ 5.365237] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input9 | |
[ 5.377140] ALSA device list: | |
[ 5.379063] #0: msm8960-snd-card | |
[ 5.383000] oprofile: using arm/armv7-krait | |
[ 5.386754] u32 classifier | |
[ 5.389317] Actions configured | |
[ 5.392705] Netfilter messages via NETLINK v0.30. | |
[ 5.397466] nf_conntrack version 0.5.0 (12580 buckets, 50320 max) | |
[ 5.403845] ctnetlink v0.93: registering with nfnetlink. | |
[ 5.409919] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 | |
[ 5.415901] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. | |
[ 5.421883] xt_time: kernel timezone is -0000 | |
[ 5.426644] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 5.431435] arp_tables: (C) 2002 David S. Miller | |
[ 5.435952] TCP cubic registered | |
[ 5.439523] NET: Registered protocol family 10 | |
[ 5.444925] Mobile IPv6 | |
[ 5.446390] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 5.451793] IPv6 over IPv4 tunneling driver | |
[ 5.456432] NET: Registered protocol family 17 | |
[ 5.460460] Bluetooth: RFCOMM TTY layer initialized | |
[ 5.465191] Bluetooth: RFCOMM socket layer initialized | |
[ 5.470349] Bluetooth: RFCOMM ver 1.11 | |
[ 5.474042] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
[ 5.479352] Bluetooth: BNEP filters: protocol | |
[ 5.483747] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
[ 5.489760] Registering the dns_resolver key type | |
[ 5.494368] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4 | |
[ 5.502090] Registering SWP/SWPB emulation handler | |
[ 5.513902] clock_late_init() disabled 160 unused clocks | |
[ 5.522600] MSM Watchdog Initialized | |
[ 5.530383] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-09 02:43:11 UTC (700991) | |
[ 5.535998] tabla_codec_get_plug_type: Detect attempt 1 and 2 are not same | |
[ 5.536090] ------------[ cut here ]------------ | |
[ 5.536120] WARNING: at /media/BIG/Release-1.3-sata-fix/APQ8060A_M8960AAAAANLYA1519249_V_13/kernel/sound/soc/codecs/wcd9310.c:6397 tabla_find_plug_and_repo | |
rt+0x144/0x160() | |
[ 5.536120] Unexpected current plug_type 0, plug_type 0 | |
[ 5.536120] Modules linked in: | |
[ 5.536151] [<c010cc1c>] (unwind_backtrace+0x0/0x12c) from [<c017bbe4>] (warn_slowpath_common+0x4c/0x64) | |
[ 5.536151] [<c017bbe4>] (warn_slowpath_common+0x4c/0x64) from [<c017bc7c>] (warn_slowpath_fmt+0x2c/0x3c) | |
[ 5.536151] [<c017bc7c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0665240>] (tabla_find_plug_and_report+0x144/0x160) | |
[ 5.536181] [<c0665240>] (tabla_find_plug_and_report+0x144/0x160) from [<c0665518>] (tabla_hs_correct_gpio_plug+0x1ac/0x278) | |
[ 5.536181] [<c0665518>] (tabla_hs_correct_gpio_plug+0x1ac/0x278) from [<c0193b24>] (process_one_work+0x2bc/0x494) | |
[ 5.536212] [<c0193b24>] (process_one_work+0x2bc/0x494) from [<c01940d8>] (worker_thread+0x224/0x3e0) | |
[ 5.536212] [<c01940d8>] (worker_thread+0x224/0x3e0) from [<c0199a78>] (kthread+0x80/0x88) | |
[ 5.536242] [<c0199a78>] (kthread+0x80/0x88) from [<c0106f84>] (kernel_thread_exit+0x0/0x8) | |
[ 5.536242] ---[ end trace cc2e75c2786e159f ]--- | |
[ 5.653898] fail to execute sys_fchmodat, ret = -2 | |
[ 5.658721] set_battery_data: Using Dragonboard ICR18650 Battery Data | |
[ 5.665679] read_ocv_trim: program rev reg is 0x32 | |
[ 5.669861] read_ocv_trim: trim reg is 0x45 | |
[ 5.673981] read_ocv_trim: trim delta is 4 | |
[ 5.678101] pm8921_is_usb_chg_plugged_in: called before init | |
[ 5.686006] pm8921_is_usb_chg_plugged_in: called before init | |
[ 5.691835] pm8921_is_usb_chg_plugged_in: called before init | |
[ 5.696566] calculate_unusable_charge_uah: Using shutdown_iavg_ua = 600 in all samples | |
[ 5.704379] pm8921_is_batfet_closed: called before init | |
[ 5.735937] pm8921_is_usb_chg_plugged_in: called before init | |
[ 5.742743] pm8921_bms_probe: OK battery_capacity_at_boot=0 volt = 3028008 ocv = 3506000 | |
[ 5.750709] power_supply usb: driver failed to report `present' property | |
[ 5.756538] power_supply usb: driver failed to report `present' property | |
[ 5.763222] power_supply pm8921-dc: driver failed to report `present' property | |
[ 5.770425] power_supply pm8921-dc: driver failed to report `present' property | |
[ 5.779948] get_prop_batt_capacity: low battery charge = 0% | |
[ 5.789073] get_prop_batt_capacity: low battery charge = 0% | |
[ 5.797039] Freeing init memory: 992K | |
[ 5.818312] init: /init.qcom.rc: 481: invalid command '/system/bin/log' | |
[ 5.824446] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. | |
[ 5.850572] get_prop_batt_capacity: low battery charge = 0% | |
[ 5.967160] init: cannot open '/initlogo.rle' | |
[ 6.326690] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1 | |
[ 6.470196] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received | |
[ 6.549336] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc | |
[ 6.567587] EXT4-fs (mmcblk0p14): recovery complete | |
[ 6.572256] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1 | |
[ 6.591301] EXT4-fs (mmcblk0p15): recovery complete | |
[ 6.596062] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1 | |
[ 6.614863] EXT4-fs (mmcblk0p16): recovery complete | |
[ 6.619655] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1 | |
[ 6.806287] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=1 | |
[ 7.416481] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=1 | |
[ 7.828902] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=0 | |
[ 7.871051] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=0 | |
[ 8.141248] wcnss_wlan triggered by userspace | |
[ 8.311674] pil pil1: brought wcnss out of reset | |
[ 8.318998] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=1 | |
[ 8.332763] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' | |
[ 8.366244] enable_store: android_usb: already disabled | |
[ 8.381931] adb_bind_config | |
[ 8.394933] frmnet_bind: RmNet(0) dual Speed, IN:ep7in OUT:ep5out | |
[ 8.412818] adb_open | |
[ 8.434091] init: cannot find '/system/bin/location-mq', disabling 'location_mq' | |
[ 8.443766] init: cannot find '/system/bin/xtwifi-inet-agent', disabling 'xtwifi_inet' | |
[ 8.457561] init: cannot find '/system/bin/xtwifi-client', disabling 'xtwifi_client' | |
/system/bin/sh: No controlling tty (open /dev/tty: No such device or address) | |
/system/bin/sh: warning: won't have full job control | |
shell@android:/ $ [ 8.531451] android_work: android_work: did not send uevent (0 0 (null)) | |
[ 8.641843] android_work: android_work: sent uevent USB_STATE=CONNECTED | |
[ 8.647764] android_work: android_work: sent uevent USB_STATE=DISCONNECTED | |
[ 8.663818] warning: `rild' uses 32-bit capabilities (legacy support in use) | |
[ 8.749061] wcnss_wlan_ctrl_probe: SMD ctrl channel up | |
[ 8.774637] android_work: android_work: sent uevent USB_STATE=CONNECTED | |
[ 8.781565] android_usb gadget: high speed config #1: android_usb | |
[ 8.786693] msm_otg msm_otg: Avail curr from USB = 500 | |
[ 8.846757] android_work: android_work: sent uevent USB_STATE=CONFIGURED | |
[ 8.852433] msm_thermal: enabled = 0 | |
[ 8.916252] alarm_set_rtc: Failed to set RTC, time will be lost on reboot | |
[ 9.690462] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0] | |
[ 9.696566] hdmi_msm hdmi_msm.1: power: ON (1920x1080 148500000) | |
[ 9.701815] hdmi_msm hdmi_msm.1: power=OFF DVI= OFF | |
[ 9.706638] msm_fb msm_fb.458753: mdp4_overlay_dtv: on | |
[ 9.737219] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core) | |
[ 9.742621] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled | |
[ 9.747779] dtv_off | |
[ 9.753120] msm_fb msm_fb.458753: mdp4_overlay_dtv: off | |
[ 10.074195] mipi_dsi_clk_enable: dsi_esc_clk - clk_set_rate failed | |
[ 10.376957] pil pil0: brought q6 out of reset | |
[ 10.408362] apr_tal:Q6 Is Up | |
[ 10.408881] apr_tal: SMD_EVENT_OPEN | |
[ 10.426216] diag: proc 2, msg mask update fail -12, tried 419 | |
[ 13.087623] msm_hsic_host msm_hsic_host: HSIC-USB in low power mode | |
[ 16.028963] lpa331ap_set_enable | |
[ 16.031069] lps331ap_prs_disable | |
[ 16.034671] l3gd20_gyro_set_enable, 552 enable : 0. | |
[ 17.227285] get_prop_batt_capacity: low battery charge = 0% | |
[ 17.248191] request_suspend_state: wakeup (3->0) at 17250839663 (2013-04-03 19:17:22.380266504 UTC) | |
[ 17.291683] lsm303dlhc_acc: hw init start | |
[ 17.307279] lsm303dlhc_acc: hw init done | |
[ 17.446757] msm_hsic_host msm_hsic_host: HSIC-USB exited from low power mode | |
[ 17.673035] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ 18.014741] hcismd_set_enable 0 | |
[ 18.016694] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL | |
[ 18.022829] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD | |
[ 18.028902] Bluetooth: HCI device registration is starting | |
[ 18.248893] cfg80211: Calling CRDA to update world regulatory domain | |
[ 18.315580] wlan: module license 'Proprietary' taints kernel. | |
[ 18.320738] Disabling lock debugging due to kernel taint | |
[ 18.395971] apr_tal: SMD_EVENT_OPEN | |
[ 18.415412] acc_open | |
[ 18.416572] acc_release | |
[ 18.678193] wlan: loading driver v3.1.7.18 | |
[ 18.684999] wlan: mac address is 00:d0:ca:f1:b3:40 | |
[ 18.757363] wcnss_post_bootup: Cancel APPS vote for Iris & Riva | |
[ 18.841629] wlan: WCNSS WLAN version 0.1.1.0 | |
[ 18.845627] wlan: WCNSS software version MAAAAANAZW1732 | |
[ 18.856706] wlan: WCNSS hardware version WCN v2.0 IRIS v2.0 with 48MHz XO | |
[ 18.871112] [0:615:E :DAT] Set DXE Power state 1 | |
[ 18.888905] wlan: driver loaded | |
[ 19.177628] ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
[ 19.326049] [0:615:E :DAT] Set DXE Power state 0 | |
[ 21.370883] [0:615:E :DAT] Set DXE Power state 1 | |
[ 21.475629] mdp_histogram_stop histogram already stopped | |
[ 26.078712] calculate_state_of_charge: bad rem_usb_chg = -72574 rem_chg 508200,cc_uah -26, unusb_chg 580800 | |
[ 26.087990] calculate_state_of_charge: for bad rem_usb_chg last_ocv_uv = 3506000chargecycles = 0, batt_temp = 222fcc = 2420000 soc =-3 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment