Battery-plugged-2013-04-25

[0] welcome to lk

[10] platform_init()
[10] target_init()
[20] Keypad initialized for Dragonboard
[20] display_init
[20] Config MIPI_CMD_PANEL.
[130] Turn on MIPI_CMD_PANEL.
[1720] Serial No: 188010103221300500
[1720] MAC Address: 00d0caf1b340
[1750] USB init ept @ 0x88f66000
[1770] fastboot_init()
[1770] udc_start()
[1890] -- reset --
[1900] -- portchange --
[2010] -- reset --
[2010] -- portchange --
[2150] fastboot: processing commands
[19700] fastboot: download:0067b800
[20220] fastboot: boot
[20250] Power on reason 32
[20250] booting linux @ 0x80208000, ramdisk @ 0x82200000 (334499)
[20250] cmdline: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 maxcpus=2 wlan_mac=00d0caf1b340 android
boot.emmc=true androidboot.serialno=188010103221300500 androidboot.baseband=msm wlan_mac=00d0caf1b340 andUncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-gff92a9c-00023-gc5bf614 (mcgrof@frijol) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Thu Apr 25 21:13:16 PDT 2013
[    0.000000] CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine: APQ8060A Dragonboard
[    0.000000] memory pool 3 (start 0xbed00000 size 1300000) initialized
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] smem_find(137, 96): wrong size 72
[    0.000000] smem_find(137, 80): wrong size 72
[    0.000000] socinfo_print: v6, id=124, ver=4.1, raw_id=1920, raw_ver=7, hw_plat=1,  hw_plat_ver=65536
[    0.000000]  accessory_chip=0 hw_plat_subtype=0
[    0.000000] allocating 28016640 bytes at c2052000 (82252000 physical) for fb
[    0.000000] PERCPU: Embedded 8 pages/cpu @c3b0d000 s16768 r0 d16000 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 210180
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 maxcpus=2 wlan_mac=0
0d0caf1b340 androidboot.emmc=true androidboot.serialno=188010103221300500 androidboot.baseband=msm wlan_mac=00d0caf1b340 androidboot.emmc=true androidboot.ser
ialno=188010103221300500 androidboot.baseband=msm
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 140MB 254MB 436MB = 830MB total
[    0.000000] Memory: 794460k/794460k available, 135332k reserved, 132096K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     timers  : 0xfffef000 - 0xffff0000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c4295c   (12523 kB)
[    0.000000]       .init : 0xc0d00000 - 0xc0e04180   (1041 kB)
[    0.000000]       .data : 0xc0e06000 - 0xc0fafd48   (1704 kB)
[    0.000000]        .bss : 0xc0fafd6c - 0xc1237060   (2589 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:1177
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000335] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
[    0.000335] pid_max: default: 32768 minimum: 301
[    0.000885] Mount-cache hash table entries: 512
[    0.002777] Initializing cgroup subsys debug
[    0.002807] Initializing cgroup subsys cpuacct
[    0.002807] Initializing cgroup subsys freezer
[    0.002868] CPU: Testing write buffer coherency: ok
[    0.003418] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003418] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
[    0.003601] Setting up static identity map for 0x80abed40 - 0x80abedc8
[    0.004944] Brought up 1 CPUs
[    0.004944] SMP: Total of 1 processors activated (13.50 BogoMIPS).
[    0.022920] dummy:
[    0.023683] NET: Registered protocol family 16
[    0.025759] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.029238] meminfo_init: smem ram ptable found: ver: 0 len: 5
[    0.029269] Found 1 memory banks grouped into 8 memory regions
[    0.029604] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
[    0.030734] msm_rpm_init: RPM firmware 3.0.16842893
[    0.057591] msm_rpm_get_status(): Status id 433 not defined for target
[    0.057591] msm_rpm_get_status(): Status id 433 not defined for target
[    0.088295] saw_probe: id=0, name=8921_s5
[    0.088844] saw_probe: id=1, name=8921_s6
[    0.089363] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
[    0.089729] pm8921_probe: PMIC revision 1: F4
[    0.089729] pm8921_probe: PMIC revision 2: 06
[    0.089760] pm8921_probe: PMIC version: PM8921 rev 3.0
[    0.089760] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
[    0.091439] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
[    0.091988] pm_gpio_probe: OK: base=152, ngpio=44
[    0.092293] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
[    0.092354] pm8xxx_mpp_probe: OK: base=196, ngpio=12
[    0.099282] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
[    0.115367] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.115397] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.122295] i2c i2c-4: Failed to register i2c client s5k3h2 at 0x10 (-16)
[    0.122295] i2c i2c-4: Can't create device at 0x10
[    0.124065] sps:BAM 0x12244000 (va:0xf0068000) enabled: ver:0x5, number of pipes:20
[    0.124065] sps:BAM 0x12244000 is registered.
[    0.124523] sps:sps is ready.
[    0.129986] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.130352] Error: Unable to find clock from of_node
[    0.130383] Error getting clocks
[    0.130383] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 0
[    0.130688] Error: Unable to find clock from of_node
[    0.130688] Error getting clocks
[    0.130718] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 1024
[    0.131054] Error: Unable to find clock from of_node
[    0.131054] Error getting clocks
[    0.131084] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 2048
[    0.131329] Error: Unable to find clock from of_node
[    0.131329] Error getting clocks
[    0.131329] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 3072
[    0.131634] Error: Unable to find clock from of_node
[    0.131634] Error getting clocks
[    0.131664] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 4096
[    0.185594] bio: create slab <bio-0> at 0
[    0.187089] vgaarb: loaded
[    0.187364] ION heap vmalloc created
[    0.187639] ION heap mm created at 0xa0000000 with size 3800000
[    0.187700] ION heap mm_fw created at 0x9fe00000 with size 1e0000
[    0.187791] ION heap mfc created at 0xa3800000 with size 42000
[    0.187822] ION heap iommu created
[    0.187913] ION heap qsecom created at 0xbed09000 with size 780000
[    0.187944] ION heap audio created at 0xbf489000 with size 4cf000
[    0.187974] ion_heap_create: Invalid heap type 6
[    0.188005] msm_ion_heap_create: error creating heap adsp type 6 base 0x00000000 size 8388608
[    0.188432] platform msm_smsc_hub: Driver msm_smsc_hub requests probe deferral
[    0.189439] pm8xxx_pwm_probe: OK
[    0.190325] SCSI subsystem initialized
[    0.190843] platform msm_slim_ctrl.1: Driver msm_slim_ctrl requests probe deferral
[    0.191393] usbcore: registered new interface driver usbfs
[    0.191484] usbcore: registered new interface driver hub
[    0.191698] usbcore: registered new device driver usb
[    0.191942] Linux media interface: v0.10
[    0.192308] Linux video capture interface: v2.00
[    0.193834] msm_iommu_dev_v0: device vpe mapped at f0400000, with 2 ctx banks
[    0.194018] msm_iommu_dev_v0: device mdp0 mapped at f0600000, with 2 ctx banks
[    0.194231] msm_iommu_dev_v0: device mdp1 mapped at f0800000, with 2 ctx banks
[    0.194384] msm_iommu_dev_v0: device rot mapped at f0a00000, with 2 ctx banks
[    0.194567] msm_iommu_dev_v0: device ijpeg mapped at f0c00000, with 2 ctx banks
[    0.194750] msm_iommu_dev_v0: device vfe mapped at f0e00000, with 2 ctx banks
[    0.194933] msm_iommu_dev_v0: device vcodec_a mapped at f1000000, with 2 ctx banks
[    0.195086] msm_iommu_dev_v0: device vcodec_b mapped at f1200000, with 2 ctx banks
[    0.195299] msm_iommu_dev_v0: device gfx3d mapped at f1400000, with 3 ctx banks
[    0.195513] msm_iommu_dev_v0: device jpegd mapped at f1600000, with 2 ctx banks
[    0.195727] msm_iommu_dev_v0: device gfx2d0 mapped at f1800000, with 2 ctx banks
[    0.195971] msm_iommu_dev_v0: device gfx2d1 mapped at f1a00000, with 2 ctx banks
[    0.196551] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
[    0.196825] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
[    0.197100] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
[    0.197375] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
[    0.197649] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
[    0.197924] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
[    0.198229] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
[    0.198473] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
[    0.198870] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
[    0.199206] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
[    0.199481] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
[    0.199725] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
[    0.199969] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
[    0.200274] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
[    0.200610] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
[    0.201037] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
[    0.201434] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
[    0.201709] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
[    0.201953] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
[    0.202289] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0
[    0.202716] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0
[    0.202899] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.203754] Bluetooth: Core ver 2.16
[    0.203845] NET: Registered protocol family 31
[    0.203845] Bluetooth: HCI device and connection manager initialized
[    0.203876] Bluetooth: HCI socket layer initialized
[    0.203876] Bluetooth: L2CAP socket layer initialized
[    0.204333] Bluetooth: SCO socket layer initialized
[    0.204852] cfg80211: Calling CRDA to update world regulatory domain
[    0.206256] Switching to clocksource gp_timer
[    0.257378] NET: Registered protocol family 2
[    0.258110] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.262200] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.270257] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    0.271295] TCP: Hash tables configured (established 131072 bind 65536)
[    0.271326] TCP: reno registered
[    0.271448] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    0.271600] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    0.272150] NET: Registered protocol family 1
[    0.272760] RPC: Registered named UNIX socket transport module.
[    0.272791] RPC: Registered udp transport module.
[    0.272791] RPC: Registered tcp transport module.
[    0.272791] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.273279] Trying to unpack rootfs image as initramfs...
[    0.299984] Freeing initrd memory: 324K
[    0.301785] Detected 5 counters on the L2CC PMU.
[    0.303464] smd_channel_probe_worker: allocation table not initialized
[    0.304929] pil-q6v4-lpass pil-q6v4-lpass: using secure boot
[    0.307981] pil_riva pil_riva: using secure boot
[    0.312528] pil_dsps pil_dsps: using secure boot
[    0.323027] msm_dsps driver version 4.03.
[    0.324889] NET: Registered protocol family 27
[    0.326110] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
[    0.329864] dma_test_init, minor number 58
[    0.330016] acpuclk-8960 acpuclk-8960: SPEED BIN: 0
[    0.330016] acpuclk-8960 acpuclk-8960: ACPU PVS: 1
[    0.331146] acpuclk-8960 acpuclk-8960: CPU Frequencies Supported: 12
[    0.334747] msm_rpm_log_probe: OK
[    0.341706] usbcore: registered new interface driver hsic_sysmon
[    0.345063] highmem bounce pool size: 64 pages
[    0.361727] NFS: Registering the id_resolver key type
[    0.364413] fuse init (API version 7.18)
[    0.365267] msgmni has been set to 1294
[    0.365878] cryptomgr_test used greatest stack depth: 7016 bytes left
[    0.370761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.370792] io scheduler noop registered
[    0.370792] io scheduler deadline registered
[    0.370853] io scheduler row registered
[    0.371188] io scheduler cfq registered (default)
[    0.371188] io scheduler test-iosched registered
[    0.375034] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1e00000
[    0.375064] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf008e000
[    0.375827] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wvga'
[    0.375858] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wsvga'
[    0.375858] msm_fb_detect_panel: not supported 'mipi_video_toshiba_wuxga'
[    0.375858] msm_fb_detect_panel: not supported 'mipi_video_novatek_qhd'
[    0.375888] msm_fb_detect_panel: not supported 'mipi_cmd_novatek_qhd'
[    0.375888] msm_fb_detect_panel: not supported 'mipi_video_orise_720p'
[    0.375919] msm_fb_detect_panel: not supported 'mipi_cmd_orise_720p'
[    0.375919] msm_fb_detect_panel: not supported 'mipi_video_renesas_fwvga'
[    0.375949] msm_fb_detect_panel: not supported 'mipi_cmd_renesas_fwvga'
[    0.375949] msm_fb_detect_panel: not supported 'mipi_video_nt35510_wvga'
[    0.375980] msm_fb_detect_panel: not supported 'mipi_cmd_nt35510_wvga'
[    0.375980] msm_fb_detect_panel: not supported 'mipi_video_truly_qhd'
[    0.375980] msm_fb_detect_panel: not supported 'mipi_cmd_truly_qhd'
[    0.376010] msm_fb_detect_panel: not supported 'mipi_video_chimei_wxga'
[    0.376010] msm_fb_detect_panel: not supported 'mipi_video_chimei_wuxga'
[    0.376041] msm_fb_detect_panel: not supported 'mipi_video_truly_wvga'
[    0.376712] setting pdata->panel_info.fb_num to 3. type: 8
[    0.399236] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
[    0.401159] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled
[    0.401434] setting pdata->panel_info.fb_num to 1. type: 7
[    0.405707] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
[    0.406226] mdp4_dtv_vsync_init: ndx=0
[    0.406561] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ee5f0808
[    0.406592] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Disabled
[    0.407050] MHL: I2C driver add failed
[    0.407080] Exiting from the init with err
[    0.407630] setting pdata->panel_info.fb_num to 1. type: 10
[    0.407904] Inside writeback_driver_init
[    0.408179] Inside writeback_probe
[    0.408576] mdp_get_panel_framerate frame rate=60 is default
[    0.411963] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
[    0.414130]
[    0.414161]  msm_vidc_enc: Inside vid_enc_init()
[    0.414649]
[    0.414649]  msm_vidc_enc: Inside vid_enc_vcd_init()
[    0.417152] msm_serial_hs.2: ttyHS2 at MMIO 0x1a040000 (irq = 192) is a MSM HS UART
[    0.417915] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
[    0.418464] msm_serial_hs module loaded
[    0.418617] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.418831] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
[    0.418983] msm_hsl_console_setup: console setup on port #0
[    1.832992] console [ttyHSL0] enabled
[    1.836960] msm_serial_hsl_init: driver initialized
[    1.843125] msm_rotator_probe: rotator_hw_revision=2
[    1.852830] diagchar initialized now
[    1.856767] kgsl kgsl-3d0: |kgsl_device_platform_probe| Shader memory: platform_get_resource_byname failed
[    1.865649] kgsl kgsl-3d0: |kgsl_device_platform_probe| request_mem_region_failed
[    1.873584] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    1.884907] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    1.894399] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU
[    1.916068] brd: module loaded
[    1.924767] loop: module loaded
[    1.927636] msm_tspp: probe of msm_tspp.0 failed with error -2
[    1.932977] i2c-core: driver [isa1200] using legacy suspend method
[    1.938898] i2c-core: driver [isa1200] using legacy resume method
[    1.947413] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    1.953181] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    1.960140] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    1.966824] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    1.975858] SCSI Media Changer driver v0.25
[    1.980711] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
[    1.987944] tun: Universal TUN/TAP device driver, 1.6
[    1.991973] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.998412] rmnet_init: BAM devices[8]
[    2.021852] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    2.030550] CSLIP: code copyright 1989 Regents of the University of California.
[    2.038058] wcnss_wlan probed in built-in mode
[    2.044559] usbcore: registered new interface driver asix
[    2.049107] usbcore: registered new interface driver cdc_ether
[    2.054845] usbcore: registered new interface driver smsc95xx
[    2.060613] usbcore: registered new interface driver net1080
[    2.066198] usbcore: registered new interface driver cdc_subset
[    2.072150] usbcore: registered new interface driver zaurus
[    2.078040] usbcore: registered new interface driver cdc_ncm
[    2.083320] usbcore: registered new interface driver rmnet_usb
[    2.090889] rmnet usb ctrl Initialized.
[    2.093941] msm_otg msm_otg: msm_otg probe
[    2.097939] msm_otg msm_otg: OTG regs = f0328000
[    2.106119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.125438] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
[    2.132214] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
[    2.167343] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12520000
[    2.187303] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
[    2.192888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.199389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.206531] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
[    2.213184] usb usb1: Manufacturer: Linux 3.4.0-gff92a9c-00023-gc5bf614 ehci_hcd
[    2.220540] usb usb1: SerialNumber: msm_hsic_host
[    2.225972] hub 1-0:1.0: USB hub found
[    2.229024] hub 1-0:1.0: 1 port detected
[    2.234274] usbcore: registered new interface driver cdc_acm
[    2.238943] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.246879] Initializing USB Mass Storage driver...
[    2.251884] usbcore: registered new interface driver usb-storage
[    2.257775] USB Mass Storage support registered.
[    2.262414] usbcore: registered new interface driver ums-alauda
[    2.268335] usbcore: registered new interface driver ums-cypress
[    2.274286] usbcore: registered new interface driver ums-datafab
[    2.280360] usbcore: registered new interface driver ums-freecom
[    2.286281] usbcore: registered new interface driver ums-isd200
[    2.292232] usbcore: registered new interface driver ums-jumpshot
[    2.298306] usbcore: registered new interface driver ums-karma
[    2.304104] usbcore: registered new interface driver ums-onetouch
[    2.310209] usbcore: registered new interface driver ums-sddr09
[    2.316038] usbcore: registered new interface driver ums-sddr55
[    2.321989] usbcore: registered new interface driver ums-usbat
[    2.330047] usbcore: registered new interface driver usbserial
[    2.334839] usbserial: USB Serial Driver core
[    2.339294] usbcore: registered new interface driver qc_csvt
[    2.344880] USB Serial support registered for qc_csvt
[    2.349977] usbcore: registered new interface driver usb_ehset_test
[    2.356203] usbcore: registered new interface driver diag_bridge
[    2.362246] usbcore: registered new interface driver mdm_bridge
[    2.369845] usbcore: registered new interface driver ks_bridge
[    2.374668] ksb_init: init done
[    2.379520] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    2.384709] mbim_init: initialize 1 instances
[    2.389043] mbim_init: Initialized 1 ports
[    2.396276] rndis_qc_init: initialize rndis QC instance
[    2.400579] msm_otg msm_otg: phy_reset: success
[    2.405981] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.411902] android_usb gadget: Number of LUNs=1
[    2.416450]  lun0: LUN: removable file: (no medium)
[    2.421974] android_usb gadget: android_usb ready
[    2.427224] mousedev: PS/2 mouse device common for all mice
[    2.433572] input: keypad_8960_dragon as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
[    2.443522] usbcore: registered new interface driver xpad
[    2.448039] cyttsp_init:Cypress TrueTouch(R) Standard Product
[    2.453624] cyttsp_init:I2C Touchscreen Driver (Built Apr 25 2013 @ 20:38:18)
[    2.460857] Sitronix touch driver 2.9.10
[    2.464642] Release date: 20120911
[    2.468579] sitronix_ts_reset_ic
[    2.623866] status reg = 0
[    2.626857] resolution = 480 x 800
[    2.630001] Chip ID = 0
[    2.631649] Num_X = 10
[    2.633999] Num_Y = 17
[    2.637265] fw revision (hex) = 5 4 0 8
[    2.640897] i2c protocol = 1
[    2.643125] sensing mode = 0
[    2.647062] max touches = 5
[    2.649290] input: sitronix-i2c-touch-key as /devices/platform/qup_i2c.3/i2c-3/3-0055/input/input1
[    2.658446] input: sitronix-i2c-touch-mt as /devices/platform/qup_i2c.3/i2c-3/3-0055/input/input2
[    2.667144] sitronix 3-0055: irq = 334
[    2.671204] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input3
[    2.681031] lis3dh_acc accelerometer driver: init
[    2.684785] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    2.691194] i2c-core: driver [lis3dh_acc] using legacy resume method
[    2.698947] using rtc device, pm8xxx_rtc, for alarms
[    2.702731] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
[    2.710239] i2c /dev entries driver
[    2.714634] DVB: registering new adapter (Qualcomm DVB adapter)
[    2.877216] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1300c8, irq:185
[    2.882832] qup_i2c qup_i2c.4: I2C slave addr:0x1a not connected
[    2.888844] msm_sensor_bayer_match_id: imx091: read id failed
[    2.894521] msm_sensor_bayer_i2c_probe imx091_i2c_probe failed
[    2.902945] imx091: probe of 4-0034 failed with error -107
[    2.919792] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
[    2.925438] qup_i2c qup_i2c.4: I2C slave addr:0x1a not connected
[    2.931451] msm_sensor_match_id: imx074: read id failed
[    2.936578] msm_sensor_i2c_probe imx074_i2c_probe failed
[    2.944483] imx074: probe of 4-001a failed with error -107
[    2.961605] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
[    2.967251] qup_i2c qup_i2c.4: I2C slave addr:0x37 not connected
[    2.973203] msm_sensor_match_id: s5k3l1yx: read id failed
[    2.978605] msm_sensor_i2c_probe s5k3l1yx_i2c_probe failed
[    2.986601] s5k3l1yx: probe of 4-0020 failed with error -107
[    3.004028] msm_sensor_match_id chip id doesnot match
[    3.008118] msm_sensor_i2c_probe imx135_i2c_probe failed
[    3.027743] qup_i2c qup_i2c.4: QUP: I2C status flags :0x1363c8, irq:185
[    3.033358] qup_i2c qup_i2c.4: I2C slave addr:0x36 not connected
[    3.039432] msm_sensor_match_id: ov2720: read id failed
[    3.044529] msm_sensor_i2c_probe ov2720_i2c_probe failed
[    3.051732] ov2720: probe of 4-006c failed with error -107
[    3.307248] qup_i2c qup_i2c.4: QUP: I2C status flags :0x13e3c8, irq:185
[    3.312894] qup_i2c qup_i2c.4: I2C slave addr:0x48 not connected
[    3.318876] msm_sensor_match_id: mt9m114: read id failed
[    3.324126] msm_sensor_i2c_probe mt9m114_i2c_probe failed
[    3.477155] fail to execute sys_fchmodat, ret = -2
[    3.507401] mt9m114: probe of 4-0048 failed with error -107
[    3.513535] msm_cam_server_request_irq IRQ Router hw is not present.
[    3.519121] msm_cam_server_request_irq IRQ Router hw is not present.
[    3.525499] msm_cam_server_request_irq IRQ Router hw is not present.
[    3.533343] msm_cam_server_request_irq IRQ Router hw is not present.
[    3.541370] lirc_dev: IR Remote Control driver registered, major 231
[    3.546955] IR NEC protocol handler initialized
[    3.551503] IR RC5(x) protocol handler initialized
[    3.556233] IR RC6 protocol handler initialized
[    3.560811] IR JVC protocol handler initialized
[    3.565267] IR Sony protocol handler initialized
[    3.569906] IR RC5 (streamzap) protocol handler initialized
[    3.575431] IR SANYO protocol handler initialized
[    3.580222] IR MCE Keyboard/mouse protocol handler initialized
[    3.585930] IR LIRC bridge handler initialized
[    3.590996] gspca_main: v2.14.0 registered
[    3.594567] usbcore: registered new interface driver uvcvideo
[    3.600213] USB Video Class driver (1.1.1)
[    3.604913] iris_radio: Cannot open the command channel
[    3.635678] pm8xxx_tm_probe: OK
[    3.639584] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.647367] Bluetooth: HCI UART driver ver 2.2
[    3.651426] Bluetooth: HCI H4 protocol initialized
[    3.656188] Bluetooth: HCIATH3K protocol initialized
[    3.661559] Bluetooth: HCI_IBS protocol initialized
[    3.667480] cpuidle: using governor ladder
[    3.670868] cpuidle: using governor menu
[    3.675141] mmc0: SDCC Version: 0x00000018
[    3.680177] mmc0: bam physical base=0x12402000
[    3.683595] mmc0: bam virtual base=0xf03b0000
[    3.687990] sps:BAM 0x12402000 is registered.
[    3.692110] mmc0: BAM device registered. bam_handle=0xee7f1600
[    3.698519] sps:BAM 0x12402000 (va:0xf03b0000) enabled: ver:0x5, number of pipes:6
[    3.707218] mmc0: Qualcomm MSM SDCC-BAM at [mem 0x12402000-0x12403fff flags 0x200] [irq 130 flags 0x400]
[    3.715733] mmc0: Qualcomm MSM SDCC-DML [mem 0x12400800-0x12401fff flags 0x200]
[    3.723088] mmc0: No card detect facilities available
[    3.730413] mmc0: Qualcomm MSM SDCC-core [mem 0x12400000-0x124007ff flags 0x200] [irq 136 flags 0x400],0 dma -1 dmacrcri -1
[    3.740698] mmc0: Controller capabilities: 0x0000039e
[    3.745643] mmc0: 8 bit data mode enabled
[    3.749763] mmc0: 4 bit data mode disabled
[    3.753792] mmc0: polling status mode disabled
[    3.758339] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
[    3.763833] mmc0: Slot eject status = 0
[    3.767587] mmc0: Power save feature enable = 1
[    3.772043] mmc0: SPS-BAM data transfer mode available
[    3.777720] mmc1: SDCC Version: 0x00000018
[    3.783518] mmc1: bam physical base=0x12182000
[    3.786937] mmc1: bam virtual base=0xf03f4000
[    3.791545] sps:BAM 0x12182000 is registered.
[    3.800579] mmc1: BAM device registered. bam_handle=0xee7f1e00
[    3.814191] sps:BAM 0x12182000 (va:0xf03f4000) enabled: ver:0x5, number of pipes:6
[    3.853410] mmc1: Qualcomm MSM SDCC-BAM at [mem 0x12182000-0x12183fff flags 0x200] [irq 128 flags 0x400]
[    3.867083] mmc1: Qualcomm MSM SDCC-DML [mem 0x12180800-0x12181fff flags 0x200]
[    3.890401] mmc1: Qualcomm MSM SDCC-core [mem 0x12180000-0x121807ff flags 0x200] [irq 134 flags 0x400],657 dma -1 dmacrcri -1
[    3.900778] mmc1: Controller capabilities: 0x0000039e
[    3.905783] mmc1: 8 bit data mode disabled
[    3.910025] mmc1: 4 bit data mode enabled
[    3.913932] mmc1: polling status mode disabled
[    3.918327] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
[    3.924065] mmc1: Slot eject status = 1
[    3.927819] mmc1: Power save feature enable = 1
[    3.932275] mmc1: SPS-BAM data transfer mode available
[    3.937646] mmc0: BKOPS_EN bit = 1
[    3.941950] qce qce.0: Qualcomm Crypto 4.2 device found at 0x18500000
[    3.947382] qce qce.0: IO base 0xf07e0000
[    3.947382] , ce_in channel 0     , ce_out channel 1
[    3.947382] , crci_in 2, crci_out 3
[    3.960994] qcrypto qcrypto.0: Qualcomm Crypto 4.2 device found at 0x18500000
[    3.967129] qcrypto qcrypto.0: IO base 0xf09a0000
[    3.967129] , ce_in channel 0     , ce_out channel 1
[    3.967129] , crci_in 2, crci_out 3
[    3.980924] qcrypto qcrypto.0: qcrypto-ecb-aes
[    3.985380] qcrypto qcrypto.0: qcrypto-cbc-aes
[    3.989653] cryptomgr_test used greatest stack depth: 6584 bytes left
[    3.995635] qcrypto qcrypto.0: qcrypto-ctr-aes
[    4.000427] qcrypto qcrypto.0: qcrypto-ecb-des
[    4.004944] qcrypto qcrypto.0: qcrypto-cbc-des
[    4.009125] mmc0: new high speed DDR MMC card at address 0001
[    4.016664] qcrypto qcrypto.0: qcrypto-ecb-3des
[    4.020509] qcrypto qcrypto.0: qcrypto-cbc-3des
[    4.024874] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
[    4.029391] qcrypto qcrypto.0: qcrypto-xts-aes
[    4.035251] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[    4.040531] qcrypto qcrypto.0: qcrypto-sha1
[    4.045658] qcrypto qcrypto.0: qcrypto-sha256
[    4.049473] qcrypto qcrypto.0: qcrypto-hmac-sha1
[    4.053929] qcrypto qcrypto.0: qcrypto-hmac-sha256
[    4.059087] qcrypto qcrypto.0: qcrypto-aes-ccm
[    4.065130] usbcore: registered new interface driver usbhid
[    4.070196]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[    4.078589] usbhid: USB HID core driver
[    4.083564] ashmem: initialized
[    4.085853] logger: created 256K log 'log_main'
[    4.097512] logger: created 256K log 'log_events'
[    4.101358] logger: created 256K log 'log_radio'
[    4.105936] logger: created 256K log 'log_system'
[    4.111094] mckernelapi : Mobicore API module initialized!
[    4.120738] coresight-tpiu coresight-tpiu.0: TPIU initialized
[    4.126293] coresight-etb coresight-etb.0: ETB initialized
[    4.131786] coresight-funnel coresight-funnel.0: FUNNEL initialized
[    4.138837] coresight-etm coresight-etm.0: ETM REG dump setup failed/unsupported
[    4.149092] coresight-etm coresight-etm.0: ETM initialized
[    4.160964] coresight-etb coresight-etb.0: ETB enabled
[    4.165084] coresight-funnel coresight-funnel.0: FUNNEL inport 0 enabled
[    4.171890] coresight-etm coresight-etm.0: ETM tracing enabled
[    4.177781] coresight-etm coresight-etm.1: ETM REG dump setup failed/unsupported
[    4.185319] coresight-etm coresight-etm.1: ETM initialized
[    4.190599] coresight-funnel coresight-funnel.0: FUNNEL inport 1 enabled
[    4.197192] coresight-funnel coresight-funnel.0: FUNNEL inport 1 disabled
[    4.203876] coresight: enable failed
[    4.208026] control_trace: Module Registered
[    4.212238] usbcore: registered new interface driver snd-usb-audio
[    4.221608] msm_pcm_probe: dev name msm-voip-dsp
[    4.227590] msm_pcm_probe: dev name msm-pcm-dsp
[    4.231466] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
[    4.236777] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
[    4.243155] msm_compr_probe: dev name msm-compr-dsp
[    4.247825] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    4.256279] msm_audio_init: Not APQ8064 in SLIMBUS mode
[    4.260552] msm8930_audio_init: Not the right machine type
[    4.265954] msm_audio_init: Not the right machine type
[    4.271265] msm_audio_init: Not APQ8064 in I2S mode
[    4.276697] oprofile: using arm/armv7-krait
[    4.280421] u32 classifier
[    4.282801]     Actions configured
[    4.286189] Netfilter messages via NETLINK v0.30.
[    4.291347] nf_conntrack version 0.5.0 (12418 buckets, 49672 max)
[    4.299038] ctnetlink v0.93: registering with nfnetlink.
[    4.304410] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    4.310514] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    4.316618] xt_time: kernel timezone is -0000
[    4.321318] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.326293] arp_tables: (C) 2002 David S. Miller
[    4.330627] TCP: cubic registered
[    4.333709] Initializing XFRM netlink socket
[    4.339600] NET: Registered protocol family 10
[    4.349336] Mobile IPv6
[    4.350923] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.356508] IPv6 over IPv4 tunneling driver
[    4.361483] NET: Registered protocol family 17
[    4.364962] NET: Registered protocol family 15
[    4.369632] Bridge firewalling registered
[    4.373355] Ebtables v2.0 registered
[    4.377384] Bluetooth: RFCOMM TTY layer initialized
[    4.381779] Bluetooth: RFCOMM socket layer initialized
[    4.386876] Bluetooth: RFCOMM ver 1.11
[    4.390660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.395910] Bluetooth: BNEP filters: protocol multicast
[    4.401251] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.407202] Registering the dns_resolver key type
[    4.412726] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
[    4.419563] Registering SWP/SWPB emulation handler
[    4.425270] clock_late_init: Removing enables held for handed-off clocks
[    4.441660] MSM Watchdog Initialized
[    4.454845] sps:BAM 0x28084000 (va:0xf07f8000) enabled: ver:0x12, number of pipes:31
[    4.461986] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-09 02:44:48 UTC (701088)
[    4.469922] sps:BAM 0x28084000 is registered.
[    4.475202] read_ocv_trim: program rev reg is 0x32
[    4.479597] tabla-slim tabla-slim: Platform data from board file
[    4.485212] slimbus:1 laddr:0x0, EAPC:0x1:0x1fail to execute sys_fchmodat, ret = -2
[    4.492842] read_ocv_trim: trim reg is 0x45
[    4.496932] read_ocv_trim: trim delta is 4
[    4.501510] slimbus:1 laddr:0x1, EAPC:0x0:0x1
[    4.505264] slimbus:1 laddr:0x2, EAPC:0x5:0x1
[    4.509659] pm8921_is_usb_chg_plugged_in: called before init
[    4.516740] pm8921_is_usb_chg_plugged_in: called before init
[    4.521593] pm8921_is_batfet_closed: called before init
[    4.548390] slimbus:1 laddr:0x3, EAPC:0x1:0x60
[    4.551777] pm8921_is_usb_chg_plugged_in: called before init
[    4.557546] slimbus:1 laddr:0x4, EAPC:0x0:0x60
[    4.564108] pm8921_is_usb_chg_plugged_in: called before init
[    4.569021] pm8921_is_batfet_closed: called before init
[    4.598596] pm8921_is_usb_chg_plugged_in: called before init
[    4.605585] pm8921_bms_probe: OK battery_capacity_at_boot=0 volt = 3035643 ocv = 3498000
ndroid Bootloader - UART_DM Initialized!!!
[0] welcome to lk