Python 3 relay toggle for Moode Audio

Instructions

Change the relay pin to the GPIO pin for your relay.
Save the contents of relaytoggle.py script to /home/pi/relaytoggle.py
Save the contents of relaytoggle.service script to /lib/systemd/system/relaytoggle.service
Run the following commands
    sudo systemctl enable relaytoggle
    sudo service relaytoggle start

relaytoggle.py

#!/usr/bin/env python3

import RPi.GPIO as GPIO
import os
import time

defaultDelay = 5 #seconds 
relayPin = 2 # GPIO pin in BCM
currentState = False # the current state

GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
GPIO.setup(relayPin, GPIO.OUT)

def isRunning():
    return "RUNNING" in os.popen('cat /proc/asound/card*/pcm*/sub*/status | grep RUNNING').read().split()

while True:
    if isRunning() and not currentState:         
        GPIO.output(relayPin, 1)
        currentState = True
        print("Relay Activated")
        time.sleep(defaultDelay)
        
    elif not isRunning() and currentState:   
        # delay again on playback stops to account for track changes
        time.sleep(defaultDelay)
                
        if isRunning():
            # if it's running don't deactivate the realay   
            print("Playback resumed, cancelling deactivation")
            continue
        else:
            # deactivate the relay
            GPIO.output(relayPin, 0)
            currentState = False
            print("Relay Deactivated")                                     
            
        time.sleep(defaultDelay)
    else:
        print("No State Change...")
        time.sleep(defaultDelay)        

relaytoggle.service

[Unit]
Description=MoOde Relay Toggle Daemon

[Service]
Restart=on-failure
WorkingDirectory=/home/pi
ExecStart=python relaytoggle.py
ExecReload=/bin/kill -HUP $MAINPID
KillSignal=SIGINT

[Install]
WantedBy=multi-user.target

Hi

Thanks for uploading this. It works like a dream.

I tweaked the Python script a little bit, to use a simple state machine. This way I can set the the pinout is set to one (turbine the amplifier on) after e very short time (in this case - 1 second), And the Amplifier stays on for a longer duration (60 seconds in this case) after playback stops. This means that the amplifier wont turn off, even if I pause the music for a short while (for instance if my wife asks me a question)

I'm new to Github, so I'm not sure if I should create a fork or how else the share my scripts. Suggestions are welcome

Hi

Thanks for uploading this. It works like a dream.

I tweaked the Python script a little bit, to use a simple state machine. This way I can set the the pinout is set to one (turbine the amplifier on) after e very short time (in this case - 1 second), And the Amplifier stays on for a longer duration (60 seconds in this case) after playback stops. This means that the amplifier wont turn off, even if I pause the music for a short while (for instance if my wife asks me a question)

I'm new to Github, so I'm not sure if I should create a fork or how else the share my scripts. Suggestions are welcome

Hey!
I want to see your version if possible - seems like it's doing the thing that I'm searching right now.
You can fork this Gist, and edit it, in this way you will make a new revision. If you want, you can modify the Instructions to give a credit to the original creator :)

Hello. I tried your script, I did everything step by step, I got nothing. Maybe I did not copy the text of the script correctly (indents, tab) or there are no necessary app. Please help.

Hello. I tried your script, I did everything step by step, I got nothing. Maybe I did not copy the text of the script correctly (indents, tab) or there are no necessary app. Please help.

I have not used Moode in a while, it could be that the script is no longer compatible.

However, an easy way to tell if the issue is formatting is you can try to run the script. You can run the command ‘python relaytoggle.py’ from the directory where the file is saved. Fix any errors it reports.

The other thing I can think of off hand is to make sure you are using the BCM PIN number, and not the board PIN number.

Hi. Thank you so much. Everything worked out. The problem is in the formatting of the document. See the screenshot.