Skip to content

Instantly share code, notes, and snippets.

@mikaelleven
Last active August 28, 2022 10:28
  • Star 4 You must be signed in to star a gist
  • Fork 2 You must be signed in to fork a gist
Star You must be signed in to star a gist
Save mikaelleven/c3db08ae7837eb3c8698 to your computer and use it in GitHub Desktop.
NodeJS SPI Dump for MCP3008 (and Raspberry Pi)

NodeJS SPI Dump for MCP3008

This is a simple script that reads all eight analog channels of an MCP3008 each second and outputs the result to the console.

I created this script to ease debugging of the MCP3008 ADC connected to my Raspberry Pi.

If you need to troubleshoot the SPI connection in itself you can check out my guide how to test SPI through the loopback "debug mode" https://mikaelleven.wordpress.com/2015/12/10/troubleshooting-spi-on-raspberry-pi-nodejs/.

Installation

Download this gist and run the following command

npm install rpio

Usage

sudo node spi_dump.js
// NodeJS SPI Dump for MCP3008 - Created by Mikael Levén
var rpio = require('rpio');
rpio.spiBegin();
//rpio.spiChipSelect(0); /* Use CE0 (slave 0) */
//rpio.spiSetCSPolarity(0, rpio.LOW); /* Commonly chip enable (CE) pins are active low, and this is the default. */
//rpio.spiSetClockDivider(256); /* MCP3008 max is ~1MHz, 256 == 0.98MHz */
//rpio.spiSetDataMode(0);
process.stdout.write('\x1b[36m');
for (var channelHeader = 0; channelHeader <= 7; channelHeader++) {
process.stdout.write('ch' + channelHeader.toString() + (channelHeader == 7 ? '\x1b[0m\n' : '\t'));
}
setInterval(function() {
for (var channel = 0; channel <= 7; channel++) {
// Prepare TX buffer [trigger byte = 0x01] [channel 0 = 0x80 (128)] [placeholder = 0x01]
var sendBuffer = new Buffer([0x01, (8 + channel << 4), 0x01]);
var recieveBuffer = rpio.spiTransfer(sendBuffer, sendBuffer.length); // Send TX buffer and recieve RX buffer
// Extract value from output buffer. Ignore first byte.
var junk = recieveBuffer[0],
MSB = recieveBuffer[1],
LSB = recieveBuffer[2];
// Ignore first six bits of MSB, bit shift MSB 8 positions and
// finally combine LSB and MSB to get a full 10 bit value
var value = ((MSB & 3) << 8) + LSB;
process.stdout.write(value.toString() + (channel == 7 ? '\n' : '\t'));
};
}, 1000);
process.on('SIGTERM', function () {
process.exit(0);
});
process.on('SIGINT', function () {
process.exit(0);
});
process.on('exit', function () {
console.log('\nShutting down, performing GPIO cleanup');
rpio.spiEnd();
process.exit(0);
});
@justin522
Copy link

I'm having the same issue as nick-jonas. It looks like the issue is on line 20. spiTransfer now takes 3 arguments.

@stephanebachelier
Copy link

@mrfy
Copy link

mrfy commented Mar 15, 2017

Hello @nick-jonas @justin522, did you resolve this problem. I have the same.

Thanks for answer.
mrFy

@vanoorschot
Copy link

vanoorschot commented Jul 7, 2017

+1

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment