Masafumi Okada mokjpn

## CM4Stack-TimeRecorder
# M5StackのCM4Stackを使って出退勤記録ボタンのようなものを作る
# このスクリプトはボタンだけで、別途用意したSubmitSyukkin.py, SubmitTaikin.py
# を起動する。CM4StackではSeleniumなども動くので幅広く応用できるかも。

import sys
import os
import time
import subprocess
from PyQt5.QtWidgets import QApplication, QWidget, QPushButton
from PyQt5.QtCore import Qt, QTimer

## M5StackViewImagebyURL.py
from m5stack import lcd
import socket
import os

def split_list(l, s):
    count = 0
    ni = []
    for i in range(0, len(l)-len(s)):
        if l[i] == s[count]:
            count=count+1

## M5Tank.ino
#include <M5StickC.h>
#include <PowerFunctions.h>

PowerFunctions pf(9, 0);

#define RED_BUTTON 32
#define BLUE_BUTTON 33
#define ButtonA 37

void setup() {

## M5Zcon.ino
#include "M5Atom.h"
#include "FastLED.h"
#include "pixeltypes.h"

// Fader Unit connected to Grove port of M5Atom Lite
#define NUM_LEDS_FADER 14
#define DATA_PIN_FADER 26
#define INPUT_PINS 32
// Define the array of leds
CRGB leds[NUM_LEDS_FADER];

## M5Zcon_HBridge.ino
#include "M5Atom.h"
#include "FastLED.h"
#include "pixeltypes.h"

// Fader Unit connected to Grove port of M5Atom Lite
#define NUM_LEDS_FADER 14
#define DATA_PIN_FADER 26
#define INPUT_PINS 32
// Define the array of leds
CRGB leds[NUM_LEDS_FADER];

## config.txt
[pi4]
disable_fw_kms_setup=1
max_framebuffers=2
disable_overscan=1
dtoverlay=vc4-fkms-v3d
hdmi_force_hotplug=1
boot_delay
kernel=vmlinuz
initramfs initrd.img followkernel
gpu_mem=512

## M5Atom_SinricMotionSensor.ino
#include <M5Atom.h>
#include <WiFi.h>
#include <SinricPro.h>
#include <SinricProMotionsensor.h>

#define WIFI_SSID         "YOUR_SSID"
#define WIFI_PASS         "YOUR_WIFIPASS"
#define APP_KEY    "YOUR_APPKEY"    // Should look like "de0bxxxx-1x3x-4x3x-ax2x-5dabxxxxxxxx"
#define APP_SECRET "YOUR_APP_SECRET" // Should look like "5f36xxxx-x3x7-4x3x-xexe-e86724a9xxxx-4c4axxxx-3x3x-x5xe-x9x3-333d65xxxxxx"
#define MOTIONSENSOR_ID  "YOUR_DEVICEID"  // Should look like "5dc1564130xxxxxxxxxxxxxx"

## PCDisplay.ino
// Display electronic power consumption meter value recieved by
// M5StickC Wi-SUN Hat ( https://kitto-yakudatsu.com/archives/7206 )
// via ESPNow

#include <TM1630LED.h>
#include <esp_now.h>
#include <WiFi.h>

#define CHANNEL 6 // Use Same Wi-Fi channel as M5StickC+Wi-SUN Hat uses.

## AtomBotter.ino
# Control SwitchBot with M5Atom+PIR sensor unit
# Many thanks to https://tech.fusic.co.jp/posts/2020-04-01-switchbot-with-m5stack/

#include <M5Atom.h>
#include "BLEDevice.h"

#define SWITCHBOT_MAC "XX:XX:XX:XX:XX:XX"
static BLEUUID serviceUUID("CBA20D00-224D-11E6-9FB8-0002A5D5C51B");
static BLEUUID characteristicUUID("CBA20002-224D-11E6-9FB8-0002A5D5C51B");


## M5StickCObnizTest.js
const m5 = require('m5stickcjs');

var obniz = new m5("XXXXXXXX");
obniz.onconnect = async function () {
//    lcd = obniz.wired('ST7735S', { mosi: 15, sclk: 13, dc: 23, res:18, cs:5});
    lcd = obniz.m5display;
    await lcd.onWait();
    console.log(lcd.width);  //128
    console.log(lcd.height); //160
    lcd.setRotation(1);
	# M5StackのCM4Stackを使って出退勤記録ボタンのようなものを作る
	# このスクリプトはボタンだけで、別途用意したSubmitSyukkin.py, SubmitTaikin.py
	# を起動する。CM4StackではSeleniumなども動くので幅広く応用できるかも。

	import sys
	import os
	import time
	import subprocess
	from PyQt5.QtWidgets import QApplication, QWidget, QPushButton
	from PyQt5.QtCore import Qt, QTimer
	from m5stack import lcd
	import socket
	import os

	def split_list(l, s):
	count = 0
	ni = []
	for i in range(0, len(l)-len(s)):
	if l[i] == s[count]:
	count=count+1
	#include <M5StickC.h>
	#include <PowerFunctions.h>

	PowerFunctions pf(9, 0);

	#define RED_BUTTON 32
	#define BLUE_BUTTON 33
	#define ButtonA 37

	void setup() {
	#include "M5Atom.h"
	#include "FastLED.h"
	#include "pixeltypes.h"

	// Fader Unit connected to Grove port of M5Atom Lite
	#define NUM_LEDS_FADER 14
	#define DATA_PIN_FADER 26
	#define INPUT_PINS 32
	// Define the array of leds
	CRGB leds[NUM_LEDS_FADER];
	[pi4]
	disable_fw_kms_setup=1
	max_framebuffers=2
	disable_overscan=1
	dtoverlay=vc4-fkms-v3d
	hdmi_force_hotplug=1
	boot_delay
	kernel=vmlinuz
	initramfs initrd.img followkernel
	gpu_mem=512
	#include <M5Atom.h>
	#include <WiFi.h>
	#include <SinricPro.h>
	#include <SinricProMotionsensor.h>

	#define WIFI_SSID "YOUR_SSID"
	#define WIFI_PASS "YOUR_WIFIPASS"
	#define APP_KEY "YOUR_APPKEY" // Should look like "de0bxxxx-1x3x-4x3x-ax2x-5dabxxxxxxxx"
	#define APP_SECRET "YOUR_APP_SECRET" // Should look like "5f36xxxx-x3x7-4x3x-xexe-e86724a9xxxx-4c4axxxx-3x3x-x5xe-x9x3-333d65xxxxxx"
	#define MOTIONSENSOR_ID "YOUR_DEVICEID" // Should look like "5dc1564130xxxxxxxxxxxxxx"
	// Display electronic power consumption meter value recieved by
	// M5StickC Wi-SUN Hat ( https://kitto-yakudatsu.com/archives/7206 )
	// via ESPNow

	#include <TM1630LED.h>
	#include <esp_now.h>
	#include <WiFi.h>

	#define CHANNEL 6 // Use Same Wi-Fi channel as M5StickC+Wi-SUN Hat uses.
	# Control SwitchBot with M5Atom+PIR sensor unit
	# Many thanks to https://tech.fusic.co.jp/posts/2020-04-01-switchbot-with-m5stack/

	#include <M5Atom.h>
	#include "BLEDevice.h"

	#define SWITCHBOT_MAC "XX:XX:XX:XX:XX:XX"
	static BLEUUID serviceUUID("CBA20D00-224D-11E6-9FB8-0002A5D5C51B");
	static BLEUUID characteristicUUID("CBA20002-224D-11E6-9FB8-0002A5D5C51B");
	const m5 = require('m5stickcjs');

	var obniz = new m5("XXXXXXXX");
	obniz.onconnect = async function () {
	// lcd = obniz.wired('ST7735S', { mosi: 15, sclk: 13, dc: 23, res:18, cs:5});
	lcd = obniz.m5display;
	await lcd.onWait();
	console.log(lcd.width); //128
	console.log(lcd.height); //160
	lcd.setRotation(1);