Skip to content

Instantly share code, notes, and snippets.

@morganrallen
Last active Aug 29, 2015
Embed
What would you like to do?
breakout
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
</settings>
<grid distance="0.01" unitdist="mm" unit="mm" style="lines" multiple="1" display="yes" altdistance="0.025" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="no" active="no"/>
<layer number="92" name="Busses" color="1" fill="1" visible="no" active="no"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="no"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="no" active="no"/>
<layer number="95" name="Names" color="7" fill="1" visible="no" active="no"/>
<layer number="96" name="Values" color="7" fill="1" visible="no" active="no"/>
<layer number="97" name="Info" color="7" fill="1" visible="no" active="no"/>
<layer number="98" name="Guide" color="6" fill="1" visible="no" active="no"/>
</layers>
<board>
<plain>
<wire x1="0" y1="0" x2="32" y2="0" width="0" layer="20"/>
<wire x1="32" y1="0" x2="32" y2="20" width="0" layer="20"/>
<wire x1="32" y1="20" x2="0" y2="20" width="0" layer="20"/>
<wire x1="0" y1="20" x2="0" y2="0" width="0" layer="20"/>
</plain>
<libraries>
<library name="wirepad">
<description>&lt;b&gt;Single Pads&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="SMD1,27-2,54">
<description>&lt;b&gt;SMD PAD&lt;/b&gt;</description>
<smd name="1" x="0" y="0" dx="1.27" dy="2.54" layer="1"/>
<text x="0" y="0" size="0.0254" layer="27">&gt;VALUE</text>
<text x="-0.8" y="-2.4" size="1.27" layer="25" rot="R90">&gt;NAME</text>
</package>
<package name="1,6/0,8">
<description>&lt;b&gt;THROUGH-HOLE PAD&lt;/b&gt;</description>
<wire x1="-0.762" y1="0.762" x2="-0.508" y2="0.762" width="0.1524" layer="21"/>
<wire x1="-0.762" y1="0.762" x2="-0.762" y2="0.508" width="0.1524" layer="21"/>
<wire x1="0.762" y1="0.762" x2="0.762" y2="0.508" width="0.1524" layer="21"/>
<wire x1="0.762" y1="0.762" x2="0.508" y2="0.762" width="0.1524" layer="21"/>
<wire x1="0.762" y1="-0.508" x2="0.762" y2="-0.762" width="0.1524" layer="21"/>
<wire x1="0.762" y1="-0.762" x2="0.508" y2="-0.762" width="0.1524" layer="21"/>
<wire x1="-0.508" y1="-0.762" x2="-0.762" y2="-0.762" width="0.1524" layer="21"/>
<wire x1="-0.762" y1="-0.762" x2="-0.762" y2="-0.508" width="0.1524" layer="21"/>
<circle x="0" y="0" radius="0.635" width="0.1524" layer="51"/>
<pad name="1" x="0" y="0" drill="0.8128" diameter="1.6002" shape="octagon"/>
<text x="-0.762" y="1.016" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="0" y="0.6" size="0.0254" layer="27">&gt;VALUE</text>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<classes>
<class number="0" name="default" width="0" drill="0">
</class>
</classes>
<designrules name="hobby">
<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
&lt;p&gt;
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.</description>
<param name="layerSetup" value="(1*16)"/>
<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
<param name="mtIsolate" value="1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm"/>
<param name="mdWireWire" value="0.8mm"/>
<param name="mdWirePad" value="0.8mm"/>
<param name="mdWireVia" value="0.8mm"/>
<param name="mdPadPad" value="0.45mm"/>
<param name="mdPadVia" value="0.8mm"/>
<param name="mdViaVia" value="0.8mm"/>
<param name="mdSmdPad" value="8mil"/>
<param name="mdSmdVia" value="8mil"/>
<param name="mdSmdSmd" value="8mil"/>
<param name="mdViaViaSameLayer" value="8mil"/>
<param name="mnLayersViaInSmd" value="2"/>
<param name="mdCopperDimension" value="10mil"/>
<param name="mdDrill" value="8mil"/>
<param name="mdSmdStop" value="0mil"/>
<param name="msWidth" value="0.8mm"/>
<param name="msDrill" value="0.8mm"/>
<param name="msMicroVia" value="9.99mm"/>
<param name="msBlindViaRatio" value="0.5"/>
<param name="rvPadTop" value="0.4"/>
<param name="rvPadInner" value="0.25"/>
<param name="rvPadBottom" value="0.4"/>
<param name="rvViaOuter" value="0.4"/>
<param name="rvViaInner" value="0.4"/>
<param name="rvMicroViaOuter" value="0.25"/>
<param name="rvMicroViaInner" value="0.25"/>
<param name="rlMinPadTop" value="0.6mm"/>
<param name="rlMaxPadTop" value="1mm"/>
<param name="rlMinPadInner" value="10mil"/>
<param name="rlMaxPadInner" value="20mil"/>
<param name="rlMinPadBottom" value="0.6mm"/>
<param name="rlMaxPadBottom" value="1mm"/>
<param name="rlMinViaOuter" value="0.6mm"/>
<param name="rlMaxViaOuter" value="1mm"/>
<param name="rlMinViaInner" value="0.5mm"/>
<param name="rlMaxViaInner" value="1mm"/>
<param name="rlMinMicroViaOuter" value="4mil"/>
<param name="rlMaxMicroViaOuter" value="20mil"/>
<param name="rlMinMicroViaInner" value="4mil"/>
<param name="rlMaxMicroViaInner" value="20mil"/>
<param name="psTop" value="1"/>
<param name="psBottom" value="1"/>
<param name="psFirst" value="-1"/>
<param name="psElongationLong" value="100"/>
<param name="psElongationOffset" value="100"/>
<param name="mvStopFrame" value="0.1"/>
<param name="mvCreamFrame" value="0"/>
<param name="mlMinStopFrame" value="0mil"/>
<param name="mlMaxStopFrame" value="20mil"/>
<param name="mlMinCreamFrame" value="0mil"/>
<param name="mlMaxCreamFrame" value="0mil"/>
<param name="mlViaStopLimit" value="0mil"/>
<param name="srRoundness" value="0"/>
<param name="srMinRoundness" value="0mil"/>
<param name="srMaxRoundness" value="0mil"/>
<param name="slThermalIsolate" value="10mil"/>
<param name="slThermalsForVias" value="0"/>
<param name="dpMaxLengthDifference" value="10mm"/>
<param name="dpGapFactor" value="2.5"/>
<param name="checkGrid" value="0"/>
<param name="checkAngle" value="0"/>
<param name="checkFont" value="1"/>
<param name="checkRestrict" value="1"/>
<param name="useDiameter" value="13"/>
<param name="maxErrors" value="50"/>
</designrules>
<autorouter>
<pass name="Default">
<param name="RoutingGrid" value="50mil"/>
<param name="tpViaShape" value="round"/>
<param name="PrefDir.1" value="|"/>
<param name="PrefDir.2" value="0"/>
<param name="PrefDir.3" value="0"/>
<param name="PrefDir.4" value="0"/>
<param name="PrefDir.5" value="0"/>
<param name="PrefDir.6" value="0"/>
<param name="PrefDir.7" value="0"/>
<param name="PrefDir.8" value="0"/>
<param name="PrefDir.9" value="0"/>
<param name="PrefDir.10" value="0"/>
<param name="PrefDir.11" value="0"/>
<param name="PrefDir.12" value="0"/>
<param name="PrefDir.13" value="0"/>
<param name="PrefDir.14" value="0"/>
<param name="PrefDir.15" value="0"/>
<param name="PrefDir.16" value="-"/>
<param name="cfVia" value="8"/>
<param name="cfNonPref" value="5"/>
<param name="cfChangeDir" value="2"/>
<param name="cfOrthStep" value="2"/>
<param name="cfDiagStep" value="3"/>
<param name="cfExtdStep" value="0"/>
<param name="cfBonusStep" value="1"/>
<param name="cfMalusStep" value="1"/>
<param name="cfPadImpact" value="4"/>
<param name="cfSmdImpact" value="4"/>
<param name="cfBusImpact" value="0"/>
<param name="cfHugging" value="3"/>
<param name="cfAvoid" value="4"/>
<param name="cfPolygon" value="10"/>
<param name="cfBase.1" value="0"/>
<param name="cfBase.2" value="1"/>
<param name="cfBase.3" value="1"/>
<param name="cfBase.4" value="1"/>
<param name="cfBase.5" value="1"/>
<param name="cfBase.6" value="1"/>
<param name="cfBase.7" value="1"/>
<param name="cfBase.8" value="1"/>
<param name="cfBase.9" value="1"/>
<param name="cfBase.10" value="1"/>
<param name="cfBase.11" value="1"/>
<param name="cfBase.12" value="1"/>
<param name="cfBase.13" value="1"/>
<param name="cfBase.14" value="1"/>
<param name="cfBase.15" value="1"/>
<param name="cfBase.16" value="0"/>
<param name="mnVias" value="20"/>
<param name="mnSegments" value="9999"/>
<param name="mnExtdSteps" value="9999"/>
<param name="mnRipupLevel" value="10"/>
<param name="mnRipupSteps" value="100"/>
<param name="mnRipupTotal" value="100"/>
</pass>
<pass name="Follow-me" refer="Default" active="yes">
</pass>
<pass name="Busses" refer="Default" active="yes">
<param name="cfNonPref" value="4"/>
<param name="cfBusImpact" value="4"/>
<param name="cfHugging" value="0"/>
<param name="mnVias" value="0"/>
</pass>
<pass name="Route" refer="Default" active="yes">
</pass>
<pass name="Optimize1" refer="Default" active="yes">
<param name="cfVia" value="99"/>
<param name="cfExtdStep" value="10"/>
<param name="cfHugging" value="1"/>
<param name="mnExtdSteps" value="1"/>
<param name="mnRipupLevel" value="0"/>
</pass>
<pass name="Optimize2" refer="Optimize1" active="yes">
<param name="cfNonPref" value="0"/>
<param name="cfChangeDir" value="6"/>
<param name="cfExtdStep" value="0"/>
<param name="cfBonusStep" value="2"/>
<param name="cfMalusStep" value="2"/>
<param name="cfPadImpact" value="2"/>
<param name="cfSmdImpact" value="2"/>
<param name="cfHugging" value="0"/>
</pass>
<pass name="Optimize3" refer="Optimize2" active="yes">
<param name="cfChangeDir" value="8"/>
<param name="cfPadImpact" value="0"/>
<param name="cfSmdImpact" value="0"/>
</pass>
<pass name="Optimize4" refer="Optimize3" active="yes">
<param name="cfChangeDir" value="25"/>
</pass>
</autorouter>
<elements>
<element name="PAD15" library="wirepad" package="SMD1,27-2,54" value="1" x="22.2" y="15.89" rot="R270"/>
<element name="PAD22" library="wirepad" package="1,6/0,8" value="" x="30.2" y="17.24"/>
<element name="PAD16" library="wirepad" package="1,6/0,8" value="1" x="30.2" y="14.7"/>
<element name="PAD23" library="wirepad" package="SMD1,27-2,54" value="" x="22.2" y="13.89" rot="R270"/>
<element name="PAD17" library="wirepad" package="1,6/0,8" value="1" x="2" y="12.16"/>
<element name="PAD24" library="wirepad" package="SMD1,27-2,54" value="" x="10" y="11.89" rot="R270"/>
<element name="PAD18" library="wirepad" package="SMD1,27-2,54" value="1" x="10" y="13.89" rot="R270"/>
<element name="PAD25" library="wirepad" package="1,6/0,8" value="" x="2" y="14.7"/>
<element name="PAD19" library="wirepad" package="1,6/0,8" value="1" x="2" y="17.24"/>
<element name="PAD26" library="wirepad" package="SMD1,27-2,54" value="" x="10" y="15.89" rot="R270"/>
<element name="PAD20" library="wirepad" package="1,6/0,8" value="1" x="30.2" y="2"/>
<element name="PAD27" library="wirepad" package="SMD1,27-2,54" value="" x="22.2" y="3.89" rot="R270"/>
<element name="PAD21" library="wirepad" package="SMD1,27-2,54" value="1" x="22.2" y="5.89" rot="R270"/>
<element name="PAD28" library="wirepad" package="1,6/0,8" value="" x="30.2" y="4.54"/>
<element name="PAD1" library="wirepad" package="SMD1,27-2,54" value="1" x="10" y="3.89" rot="R270"/>
<element name="PAD8" library="wirepad" package="1,6/0,8" value="" x="2" y="2"/>
<element name="PAD2" library="wirepad" package="SMD1,27-2,54" value="1" x="22.2" y="7.89" rot="R270"/>
<element name="PAD9" library="wirepad" package="1,6/0,8" value="" x="30.2" y="7.08"/>
<element name="PAD3" library="wirepad" package="SMD1,27-2,54" value="1" x="10" y="5.89" rot="R270"/>
<element name="PAD10" library="wirepad" package="1,6/0,8" value="" x="2" y="4.54"/>
<element name="PAD4" library="wirepad" package="SMD1,27-2,54" value="1" x="22.2" y="9.89" rot="R270"/>
<element name="PAD11" library="wirepad" package="1,6/0,8" value="" x="30.2" y="9.62"/>
<element name="PAD5" library="wirepad" package="SMD1,27-2,54" value="1" x="10" y="7.89" rot="R270"/>
<element name="PAD12" library="wirepad" package="1,6/0,8" value="" x="2" y="7.08"/>
<element name="PAD6" library="wirepad" package="SMD1,27-2,54" value="1" x="22.2" y="11.89" rot="R270"/>
<element name="PAD13" library="wirepad" package="1,6/0,8" value="" x="30.2" y="12.16"/>
<element name="PAD7" library="wirepad" package="SMD1,27-2,54" value="1" x="10" y="9.89" rot="R270"/>
<element name="PAD14" library="wirepad" package="1,6/0,8" value="" x="2" y="9.62"/>
</elements>
<signals>
<signal name="N$1">
<contactref element="PAD15" pad="1"/>
<contactref element="PAD22" pad="1"/>
<wire x1="22.2" y1="15.89" x2="30.2" y2="17.24" width="0.8" layer="1"/>
</signal>
<signal name="N$3">
<contactref element="PAD16" pad="1"/>
<contactref element="PAD23" pad="1"/>
<wire x1="30.2" y1="14.7" x2="22.2" y2="13.89" width="0.8" layer="1"/>
</signal>
<signal name="N$4">
<contactref element="PAD17" pad="1"/>
<contactref element="PAD24" pad="1"/>
<wire x1="2" y1="12.16" x2="10" y2="11.89" width="0.8" layer="1"/>
</signal>
<signal name="N$5">
<contactref element="PAD18" pad="1"/>
<contactref element="PAD25" pad="1"/>
<wire x1="2" y1="14.7" x2="10" y2="13.89" width="0.8" layer="1"/>
</signal>
<signal name="N$6">
<contactref element="PAD19" pad="1"/>
<contactref element="PAD26" pad="1"/>
<wire x1="2" y1="17.24" x2="10" y2="15.89" width="0.8" layer="1"/>
</signal>
<signal name="N$7">
<contactref element="PAD20" pad="1"/>
<contactref element="PAD27" pad="1"/>
<wire x1="22.2" y1="3.89" x2="30.2" y2="2" width="0.8" layer="1"/>
</signal>
<signal name="N$8">
<contactref element="PAD21" pad="1"/>
<contactref element="PAD28" pad="1"/>
<wire x1="22.2" y1="5.89" x2="30.2" y2="4.54" width="0.8" layer="1"/>
</signal>
<signal name="N$9">
<contactref element="PAD1" pad="1"/>
<contactref element="PAD8" pad="1"/>
<wire x1="10" y1="3.89" x2="2" y2="2" width="0.8" layer="1"/>
</signal>
<signal name="N$10">
<contactref element="PAD2" pad="1"/>
<contactref element="PAD9" pad="1"/>
<wire x1="22.2" y1="7.89" x2="30.2" y2="7.08" width="0.8" layer="1"/>
</signal>
<signal name="N$11">
<contactref element="PAD3" pad="1"/>
<contactref element="PAD10" pad="1"/>
<wire x1="2" y1="4.54" x2="10" y2="5.89" width="0.8" layer="1"/>
</signal>
<signal name="N$12">
<contactref element="PAD4" pad="1"/>
<contactref element="PAD11" pad="1"/>
<wire x1="22.2" y1="9.89" x2="30.2" y2="9.62" width="0.8" layer="1"/>
</signal>
<signal name="N$13">
<contactref element="PAD5" pad="1"/>
<contactref element="PAD12" pad="1"/>
<wire x1="10" y1="7.89" x2="2" y2="7.08" width="0.8" layer="1"/>
</signal>
<signal name="N$14">
<contactref element="PAD6" pad="1"/>
<contactref element="PAD13" pad="1"/>
<wire x1="22.2" y1="11.89" x2="30.2" y2="12.16" width="0.8" layer="1"/>
</signal>
<signal name="N$15">
<contactref element="PAD7" pad="1"/>
<contactref element="PAD14" pad="1"/>
<wire x1="2" y1="9.62" x2="10" y2="9.89" width="0.8" layer="1"/>
</signal>
</signals>
<errors>
<approved hash="5,1,128ba86bcc226c78"/>
<approved hash="5,1,f29c27a556b74097"/>
</errors>
</board>
</drawing>
</eagle>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment