Skip to content

Instantly share code, notes, and snippets.

@mpratt14

mpratt14/dmesg.log

Created Jun 26, 2020
Embed
What would you like to do?
ENS202EXT first boot kernel log ath79 master - jffs2 fixed no config restore
[ 0.000000] Linux version 5.4.48 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13342+179-e35e40ad82)) #0 Tue Jun 23 20:20:29 2020
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] MIPS: machine is Engenius ENS202EXT
[ 0.000000] SoC: Atheros AR9341 rev 1
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 144 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 57412K/65536K available (4717K kernel code, 180K rwdata, 1100K rodata, 1228K init, 196K bss, 8124K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
[ 0.000000] CPU clock: 535.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7144898866 ns
[ 0.000010] sched_clock: 32 bits at 267MHz, resolution 3ns, wraps every 8027976190ns
[ 0.008328] Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
[ 0.050912] pid_max: default: 32768 minimum: 301
[ 0.056008] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.063812] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.077493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.087927] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.095344] pinctrl core: initialized pinctrl subsystem
[ 0.102221] NET: Registered protocol family 16
[ 0.148220] clocksource: Switched to clocksource MIPS
[ 0.155146] NET: Registered protocol family 2
[ 0.160867] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.169867] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.178048] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.185572] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.192509] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.199541] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.207401] NET: Registered protocol family 1
[ 0.212141] PCI: CLS 0 bytes, default 32
[ 0.221071] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[ 0.236437] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.242684] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.273203] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 0.280654] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.288427] printk: console [ttyS0] disabled
[ 0.293067] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[ 0.302281] printk: console [ttyS0] enabled
[ 0.311188] printk: bootconsole [early0] disabled
[ 0.330541] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[ 0.335914] 9 fixed-partitions partitions found on MTD device spi0.0
[ 0.342381] Creating 9 MTD partitions on "spi0.0":
[ 0.347260] 0x000000000000-0x000000040000 : "u-boot"
[ 0.353534] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.360094] 0x000000050000-0x0000000a0000 : "custom"
[ 0.366348] 0x0000000a0000-0x0000000b0000 : "loader"
[ 0.372656] 0x0000000b0000-0x000000220000 : "firmware2"
[ 0.379146] 0x000000220000-0x000000230000 : "fakeroot"
[ 0.385555] 0x000000230000-0x000000df0000 : "firmware1"
[ 0.392090] 0x000000df0000-0x000000ff0000 : "failsafe"
[ 0.398506] 0x000000ff0000-0x000001000000 : "art"
[ 0.404894] Concatenating MTD devices:
[ 0.408766] (0): "firmware1"
[ 0.411685] (1): "firmware2"
[ 0.414616] into device "virtual_flash"
[ 0.418560] 1 fixed-partitions partitions found on MTD device virtual_flash
[ 0.425632] Creating 1 MTD partitions on "virtual_flash":
[ 0.431130] 0x000000000000-0x000000d30000 : "firmware"
[ 0.449654] 2 okli-fw partitions found on MTD device firmware
[ 0.455551] Creating 2 MTD partitions on "firmware":
[ 0.460623] 0x000000000000-0x0000001f0000 : "kernel"
[ 0.466777] 0x0000001f0000-0x000000d30000 : "rootfs"
[ 0.473056] mtd: device 11 (rootfs) set to be root filesystem
[ 0.481313] 1 squashfs-split partitions found on MTD device rootfs
[ 0.487670] 0x000000560000-0x000000d30000 : "rootfs_data"
[ 0.496699] libphy: Fixed MDIO Bus: probed
[ 0.837329] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[ 1.140208] random: fast init done
[ 1.161884] ------------[ cut here ]------------
[ 1.166682] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:556 __reset_control_get_internal+0x15c/0x190
[ 1.176216] Modules linked in:
[ 1.179327] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.48 #0
[ 1.185164] Stack : 80640000 805dfdf8 00000000 00000000 805defc8 83c2795c 83c282fc 80615d03
[ 1.193661] 805819c4 00000001 807732d8 00000001 00000000 00000001 83c27910 712127d8
[ 1.202152] 00000000 00000000 807a0000 0000005e 61696e74 00000000 2e342e34 38202330
[ 1.210643] 0000005e 8cc27632 00000000 0002bc7f 00000000 00000009 00000000 802d7130
[ 1.219135] 00000009 00000001 00000000 83c82a10 00000000 802ee410 00000000 80770000
[ 1.227627] ...
[ 1.230121] Call Trace:
[ 1.232637] [<80069934>] show_stack+0x30/0x100
[ 1.237187] [<8007e7f8>] __warn+0xc0/0x10c
[ 1.241360] [<8007e8a0>] warn_slowpath_fmt+0x5c/0xac
[ 1.246414] [<802d7130>] __reset_control_get_internal+0x15c/0x190
[ 1.252605] [<802d72a4>] __of_reset_control_get+0x140/0x1fc
[ 1.258273] [<802d762c>] __devm_reset_control_get+0x70/0x108
[ 1.264054] [<803538a8>] ag71xx_mdio_probe+0xbc/0x208
[ 1.269221] [<80301cdc>] platform_drv_probe+0x40/0x94
[ 1.274358] [<802ffe30>] really_probe+0x104/0x358
[ 1.279145] [<802fdf20>] bus_for_each_drv+0x70/0xb0
[ 1.284108] [<802ffce8>] __device_attach+0xdc/0x118
[ 1.289072] [<802fee58>] bus_probe_device+0x9c/0xb8
[ 1.294033] [<802fc22c>] device_add+0x3e4/0x608
[ 1.298655] [<80368abc>] of_platform_device_create_pdata+0xa8/0x150
[ 1.305026] [<80368ca4>] of_platform_bus_create+0x134/0x224
[ 1.310692] [<80368f10>] of_platform_populate+0x78/0xec
[ 1.316019] [<80355bd8>] ag71xx_probe+0x6e4/0x98c
[ 1.320814] [<80301cdc>] platform_drv_probe+0x40/0x94
[ 1.325952] [<802ffe30>] really_probe+0x104/0x358
[ 1.330741] [<80300578>] device_driver_attach+0x70/0x98
[ 1.336056] [<80300600>] __driver_attach+0x60/0x100
[ 1.341017] [<802fde60>] bus_for_each_dev+0x68/0xa4
[ 1.345979] [<802ff1cc>] bus_add_driver+0x1f0/0x200
[ 1.350944] [<80300c6c>] driver_register+0x84/0x148
[ 1.355912] [<80651920>] ag71xx_module_init+0x2c/0x50
[ 1.361046] [<80060a1c>] do_one_initcall+0x7c/0x1dc
[ 1.366010] [<8063de10>] kernel_init_freeable+0x158/0x23c
[ 1.371512] [<804f50d8>] kernel_init+0x10/0xf0
[ 1.376032] [<80064d98>] ret_from_kernel_thread+0x14/0x1c
[ 1.381534] ---[ end trace f4d8db1ba0a810bb ]---
[ 1.386656] libphy: ag71xx_mdio: probed
[ 1.391949] libphy: ar8xxx-mdio: probed
[ 1.404389] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[ 1.450153] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.460064] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[ 1.466574] i2c /dev entries driver
[ 1.473152] NET: Registered protocol family 10
[ 1.484921] Segment Routing with IPv6
[ 1.488854] NET: Registered protocol family 17
[ 1.493480] 8021q: 802.1Q VLAN Support v1.8
[ 1.814171] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:00 [uid=004dd042, driver=Generic PHY]
[ 1.824679] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 1.838296] VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
[ 1.853622] Freeing unused kernel memory: 1228K
[ 1.858255] This architecture does not have kernel memory protection.
[ 1.864795] Run /sbin/init as init process
[ 2.652849] init: Console is alive
[ 2.656687] init: - watchdog -
[ 3.733583] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.799510] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.817455] init: - preinit -
[ 4.985186] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.146001] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.343421] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.158962] eth0: link up (1000Mbps/Full duplex)
[ 6.168325] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.184395] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 6.250822] urandom_read: 4 callbacks suppressed
[ 6.250831] random: procd: uninitialized urandom read (4 bytes read)
[ 10.542696] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[ 10.550087] jffs2_build_filesystem(): unlocking the mtd device...
[ 10.550094] done.
[ 10.558313] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 43.925387] done.
[ 43.934999] jffs2: notice: (545) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 43.952152] mount_root: overlay filesystem has not been fully initialized yet
[ 43.960433] mount_root: switching to jffs2 overlay
[ 43.991404] overlayfs: upper fs does not support tmpfile.
[ 44.001622] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 44.122758] eth0: link down
[ 44.150697] procd: - early -
[ 44.153931] procd: - watchdog -
[ 44.821285] procd: - watchdog -
[ 44.824922] procd: - ubus -
[ 44.923274] random: ubusd: uninitialized urandom read (4 bytes read)
[ 44.984850] random: ubusd: uninitialized urandom read (4 bytes read)
[ 44.996809] procd: - init -
[ 45.855874] kmodloader: loading kernel modules from /etc/modules.d/*
[ 46.016193] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
[ 46.023964] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
[ 46.101315] xt_time: kernel timezone is -0000
[ 46.275826] PPP generic driver version 2.4.2
[ 46.293474] NET: Registered protocol family 24
[ 46.366159] urngd: v1.0.2 started.
[ 46.420700] ath: EEPROM regdomain sanitized
[ 46.420715] ath: EEPROM regdomain: 0x64
[ 46.420720] ath: EEPROM indicates we should expect a direct regpair map
[ 46.420746] ath: Country alpha2 being used: 00
[ 46.420751] ath: Regpair used: 0x64
[ 46.435849] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 46.438460] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=2
[ 46.576718] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 46.800881] random: crng init done
[ 83.565283] eth0: link up (1000Mbps/Full duplex)
[ 83.584307] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 83.592616] br-lan: port 1(eth0.1) entered blocking state
[ 83.598158] br-lan: port 1(eth0.1) entered disabled state
[ 83.604194] device eth0.1 entered promiscuous mode
[ 83.609126] device eth0 entered promiscuous mode
[ 83.666196] br-lan: port 1(eth0.1) entered blocking state
[ 83.671745] br-lan: port 1(eth0.1) entered forwarding state
[ 84.576321] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.