radar2.uno

// import libraries
#include <Servo.h>  // Michael Margolis, Arduino

// set pins
#define triggerPin 7
#define echoPin 8
#define servoPin 9

// define objects
Servo baseMotor;

// define variables
int angle;
long duration;
int distance;

void setup() {
    // setup serial
    Serial.begin(9600);
    
    //setup servo
    baseMotor.attach(servoPin);
    
    //setup ultrasonic
    pinMode(triggerPin, OUTPUT);
    pinMode(echoPin, INPUT);
}

void loop() {
  for (angle = 0; angle < 180; angle += 10) {
    // set angle
    baseMotor.write(angle);
    delay(1000);

    // get distance
    getDistance();

    // show resault
    Serial.print("Angle: ");
    Serial.print(angle);
    Serial.print(", Distance: ");
    Serial.print(distance);
    Serial.println("cm");
  }
  for (angle = 180; angle > 0; angle -= 10) {
    // set angle
    baseMotor.write(angle);
    delay(1000);

    // get distance
    getDistance();

    // show resault
    Serial.print("Angle: ");
    Serial.print(angle);
    Serial.print(", Distance: ");
    Serial.print(distance);
    Serial.println("cm");
  }
}

void getDistance() {
  // reset ulterasonic
  digitalWrite(triggerPin, LOW);
  delayMicroseconds(2);

  // send signal
  digitalWrite(triggerPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(triggerPin, LOW);

  // recive signal
  duration = pulseIn(echoPin, HIGH);

  // calculate distance
  distance= duration*0.034/2;
}