Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
android-ia bootup
[ 0.020718] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.020718] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.102985] EM:OEM0 table not found!!
[ 0.489910] intel_setup_crystal_cove_sd_regulators: no match device found
[ 0.675648] hpet: number irqs doesn't agree with number of timers
[ 0.770594] i2c i2c-4: normal 7 bit addr failed
[ 0.813174] i2c i2c-4: normal 7 bit addr failed
[ 0.855740] i2c i2c-4: normal 7 bit addr failed
[ 0.898297] i2c i2c-4: normal 7 bit addr failed
[ 0.902879] [drm:intel_hdmi_get_edid] *ERROR* Get_hdmi cant read edid
[ 0.912246] ------------[ cut here ]------------
[ 0.916902] WARNING: CPU: 2 PID: 1 at fs/sysfs/dir.c:52 sysfs_warn_dup+0x86/0xa0()
[ 0.924489] sysfs: cannot create duplicate filename '/devices/virtual/extcon/hdmi'
[ 0.932397] ---[ end trace 2557f1cf558e08b2 ]---
[ 0.937031] ------------[ cut here ]------------
[ 0.941668] WARNING: CPU: 2 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x284/0x3f0()
[ 0.950230] ---[ end trace 2557f1cf558e08b3 ]---
[ 1.022854] i2c i2c-4: normal 7 bit addr failed
[ 1.065409] i2c i2c-4: normal 7 bit addr failed
[ 1.107957] i2c i2c-4: normal 7 bit addr failed
[ 1.150527] i2c i2c-4: normal 7 bit addr failed
[ 1.155106] [drm:intel_hdmi_get_edid] *ERROR* Get_hdmi cant read edid
[ 1.212619] i2c i2c-1: normal 7 bit addr failed
[ 1.367926] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 1.374300] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[ 1.463142] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.477186] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.537399] intel_byt_dts_thermal: request_threaded_irq ret -22
[ 1.575631] intel_rapl: RAPL domain uncore detection failed
[ 1.581301] intel_rapl: RAPL domain dram detection failed
[ 1.603369] otg_wakelock_init: No USB transceiver found
[ 1.609262] init: failed to probe driver -19
[ 1.615847] had: Vidya: Enter alsa_card_intelhad_init
[ 2.266650] init: could not import file '/init.userfastboot.rc' from '/init.rc'
[ 2.586051] init: /dev/hw_random not found
[ 2.591056] init: /dev/hw_random not found
[ 2.607573] init: Warning! Service dhcpcd_eth0 needs a SELinux domain defined; please fix!
$ [ 2.620015] r8169 0000:01:00.0: Direct firmware load failed with error -2
[ 2.621804] userfastboot: starting graphics
[ 2.631306] r8169 0000:01:00.0: Falling back to user helper
[ 2.632383] r8169 0000:01:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
[ 2.802952] userfastboot: graphics OK
[ 3.009440] usb 1-2.2: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 3.355277] usb 1-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.522395] usb 1-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 96 microframes
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.